class EDPluginControlInterfaceToMXCuBEv1_3(EDPluginControl):
"""
This is the plugin interface to launch the MXv1 characterisation from an MXCuBE gui.
It is for the moment a wrapper for the EDPluginControlCCP4iv1_1 plugin, which also
runs the ISPyB control plugin if a data collection id is available.
"""
EDNA_CONTACT_EMAIL = "contactEmail"
EDNA_EMAIL_SENDER = "emailSender"
def __init__ (self):
"""
Initialisation of EDPluginControlInterfaceToMXCuBEv1_3:
- Input data type class : XSDataInputMXCuBE
- Name of default characterisation plugin : EDPluginControlCharacterisationv1_1
"""
EDPluginControl.__init__(self)
self.setXSDataInputClass(XSDataInputMXCuBE)
self.strPluginControlInterface = "EDPluginControlInterfacev1_2"
self.edPluginControlInterface = None
self.strPluginControlISPyB = "EDPluginControlISPyBv1_4"
self.edPluginControlISPyB = None
self.xsDataResultMXCuBE = None
self.xsDataIntegerDataCollectionId = None
self.strPluginExecOutputHTMLName = "EDPluginExecOutputHTMLv1_0"
self.edPluginExecOutputHTML = None
self.strPluginExecSimpleHTMLName = "EDPluginExecSimpleHTMLPagev1_0"
self.edPluginExecSimpleHTML = None
self.strPluginISPyBRetrieveDataCollection = "EDPluginISPyBRetrieveDataCollectionv1_4"
self.edPluginISPyBRetrieveDataCollection = None
self.strEDNAContactEmail = None
self.strEDNAEmailSender = "*****@*****.**"
self.tStart = None
self.tStop = None
self.fFluxThreshold = 1e3
def checkParameters(self):
"""
Checks the mandatory input parameters :
- dataSet
- outputFileDirectory
"""
self.verboseDebug("EDPluginControlInterfaceToMXCuBEv1_3.checkParameters")
self.checkMandatoryParameters(self.getDataInput(), "Data Input is None")
self.checkMandatoryParameters(self.getDataInput().getDataSet(), "dataSet")
def configure(self):
EDPluginControl.configure(self)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.configure")
self.strEDNAEmailSender = self.config.get(self.EDNA_EMAIL_SENDER, self.strEDNAEmailSender)
self.strEDNAContactEmail = self.config.get(self.EDNA_CONTACT_EMAIL, self.strEDNAContactEmail)
def preProcess(self, _edPlugin=None):
"""
This method prepares the input for the CCP4i plugin and loads it.
"""
EDPluginControl.preProcess(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.preProcess...")
self.tStart = time.time()
# self.edPluginExecOutputHTML = self.loadPlugin(self.strPluginExecOutputHTMLName, "OutputHTML")
self.edPluginExecSimpleHTML = self.loadPlugin(self.strPluginExecSimpleHTMLName, "SimpleHTML")
self.edPluginISPyBRetrieveDataCollection = self.loadPlugin(self.strPluginISPyBRetrieveDataCollection, \
"ISPyBRetrieveDataCollection")
self.xsDataResultMXCuBE = XSDataResultMXCuBE()
def process(self, _edPlugin=None):
EDPluginControl.process(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.process...")
xsDataInputMXCuBE = self.getDataInput()
xsDataInputInterface = XSDataInputInterface()
self.edPluginControlInterface = self.loadPlugin(self.strPluginControlInterface)
xsDataFirstImage = None
for xsDataSetMXCuBE in xsDataInputMXCuBE.getDataSet():
for xsDataFile in xsDataSetMXCuBE.getImageFile():
xsDataInputInterface.addImagePath(xsDataFile)
if xsDataFirstImage is None:
xsDataFirstImage = xsDataFile
xsDataExperimentalCondition = self.getFluxAndBeamSizeFromISPyB(xsDataFirstImage, \
xsDataInputMXCuBE.getExperimentalCondition())
xsDataInputInterface.setExperimentalCondition(xsDataExperimentalCondition)
xsDataInputInterface.setDiffractionPlan(xsDataInputMXCuBE.getDiffractionPlan())
xsDataInputInterface.setSample(xsDataInputMXCuBE.getSample())
xsDataInputInterface.setDataCollectionId(xsDataInputMXCuBE.getDataCollectionId())
self.edPluginControlInterface.setDataInput(xsDataInputInterface)
if self.edPluginControlInterface is not None:
self.connectProcess(self.edPluginControlInterface.executeSynchronous)
self.edPluginControlInterface.connectSUCCESS(self.doSuccessActionInterface)
self.edPluginControlInterface.connectFAILURE(self.doFailureActionInterface)
def finallyProcess(self, _edPlugin=None):
EDPluginControl.finallyProcess(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.postProcess...")
self.setDataOutput(self.xsDataResultMXCuBE)
def doSuccessActionInterface(self, _edPlugin=None):
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionInterface...")
self.retrieveSuccessMessages(self.edPluginControlInterface, "EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionInterface")
# Send success email message (MXSUP-183):
self.tStop = time.time()
strSubject = "%s : SUCCESS! (%.1f s)" % (EDUtilsPath.getEdnaSite(), self.tStop - self.tStart)
strMessage = "Characterisation success!"
self.storeResultsInISPyB(strSubject, strMessage)
def doFailureActionInterface(self, _edPlugin=None):
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.doFailureActionInterface...")
# Send failure email message (MXSUP-183):
strSubject = "%s : FAILURE!" % EDUtilsPath.getEdnaSite()
strMessage = "Characterisation FAILURE!"
self.storeResultsInISPyB(strSubject, strMessage)
# self.setFailure()
# xsDataResultCharacterisation = None
# if self.edPluginControlInterface.hasDataOutput("characterisation"):
# xsDataResultCharacterisation = self.edPluginControlInterface.getDataOutput("characterisation")[0]
# # Execute plugin which creates a simple HTML page
# self.executeSimpleHTML(xsDataResultCharacterisation)
# xsDataResultCharacterisation = self.edPluginControlInterface.dataOutput.resultCharacterisation
# if xsDataResultCharacterisation is not None:
# self.xsDataResultMXCuBE.characterisationResult = xsDataResultCharacterisation
# if xsDataResultCharacterisation.getStatusMessage():
# strMessage += "\n\n"
# strMessage += xsDataResultCharacterisation.getStatusMessage().getValue()
# if xsDataResultCharacterisation.getShortSummary():
# strMessage += "\n\n"
# strMessage += xsDataResultCharacterisation.getShortSummary().getValue()
# self.sendEmail(strSubject, strMessage)
def storeResultsInISPyB(self, _strSubject, _strMessage):
strSubject = _strSubject
strMessage = _strMessage
xsDataResultCharacterisation = self.edPluginControlInterface.getDataOutput().getResultCharacterisation()
self.xsDataResultMXCuBE.setCharacterisationResult(xsDataResultCharacterisation)
xsDataResultControlISPyB = self.edPluginControlInterface.getDataOutput().getResultControlISPyB()
if xsDataResultControlISPyB != None:
self.xsDataResultMXCuBE.setScreeningId(xsDataResultControlISPyB.getScreeningId())
if xsDataResultCharacterisation != None:
self.xsDataResultMXCuBE.characterisationResult = xsDataResultCharacterisation
strPathCharacterisationResult = os.path.join(self.getWorkingDirectory(), "CharacterisationResult.xml")
xsDataResultCharacterisation.exportToFile(strPathCharacterisationResult)
self.xsDataResultMXCuBE.setListOfOutputFiles(XSDataString(strPathCharacterisationResult))
# For the moment, create "DNA" style output directory
strPathToDNAFileDirectory = self.createDNAFileDirectoryPath(xsDataResultCharacterisation)
xsDataDictionaryLogFile = None
if (self.createDNAFileDirectory(strPathToDNAFileDirectory)):
xsDataDictionaryLogFile = self.createOutputFileDictionary(xsDataResultCharacterisation, strPathToDNAFileDirectory)
strPyArchPathToDNAFileDirectory = self.createPyArchDNAFilePath(strPathToDNAFileDirectory)
if (self.createDNAFileDirectory(strPyArchPathToDNAFileDirectory)):
xsDataDictionaryLogFile = self.createOutputFileDictionary(xsDataResultCharacterisation, strPyArchPathToDNAFileDirectory)
self.xsDataResultMXCuBE.setOutputFileDictionary(xsDataDictionaryLogFile)
if xsDataResultCharacterisation.getStatusMessage():
strMessage += "\n\n"
strMessage += xsDataResultCharacterisation.getStatusMessage().getValue()
if xsDataResultCharacterisation.getShortSummary():
strMessage += "\n\n"
strMessage += xsDataResultCharacterisation.getShortSummary().getValue()
self.sendEmail(strSubject, strMessage)
# Fix for bug EDNA-55 : If burning strategy EDNA2html shouldn't be run
bRunExecOutputHTML = False
xsDataInputMXCuBE = self.getDataInput()
xsDataDiffractionPlan = xsDataInputMXCuBE.getDiffractionPlan()
if xsDataDiffractionPlan.getStrategyOption() is not None:
strStrategyOption = xsDataDiffractionPlan.getStrategyOption().getValue()
if strStrategyOption.find("-DamPar") != -1:
bRunExecOutputHTML = False
if (self.edPluginExecOutputHTML is not None) and bRunExecOutputHTML:
self.edPluginExecOutputHTML.setDataInput(XSDataFile(XSDataString(strPathToDNAFileDirectory)), "dnaFileDirectory")
self.edPluginExecOutputHTML.execute()
# Fix for bug MXSUP-251: Put the BEST .par file in the EDNA characterisation root directory
xsDataIntegrationResult = xsDataResultCharacterisation.getIntegrationResult()
if xsDataIntegrationResult:
listXSDataIntegrationSubWedgeResult = xsDataIntegrationResult.getIntegrationSubWedgeResult()
if listXSDataIntegrationSubWedgeResult:
if listXSDataIntegrationSubWedgeResult != []:
strBestfilePar = listXSDataIntegrationSubWedgeResult[0].getBestfilePar().getValue()
# Put the file one directory above the mxCuBE v1.3 plugin working directory:
strDir = os.path.dirname(self.getWorkingDirectory())
strPath = os.path.join(strDir, "bestfile.par")
EDUtilsFile.writeFile(strPath, strBestfilePar)
# Execute plugin which creates a simple HTML page
self.executeSimpleHTML(xsDataResultCharacterisation)
def doSuccessActionISPyB(self, _edPlugin):
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionISPyB...")
self.retrieveSuccessMessages(self.edPluginControlISPyB, "EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionISPyB")
def doFailureActionISPyB(self, _edPlugin=None):
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.doFailureActionISpyB...")
self.retrieveFailureMessages(self.edPluginControlISPyB, "EDPluginControlInterfaceToMXCuBEv1_3.doFailureActionISpyB")
# Send failure email message (MXSUP-183):
strSubject = "%s : FAILURE!" % EDUtilsPath.getEdnaSite()
strMessage = "ISPyB FAILURE!"
self.sendEmail(strSubject, strMessage)
def createDNAFileDirectoryPath(self, _xsDataResultCharacterisation):
"""
This method creates a "DNA" style directory path, i.e. in the same directory were the
images are located a new directory is created with the following convention:
dnafiles_prefix_runNumber
The path to this directory is returned if the directory was successfully created.
"""
# First extract all reference image directory paths and names
xsDataCollection = _xsDataResultCharacterisation.getDataCollection()
listImageDirectoryPath = []
listImagePrefix = []
for xsDataSubWedge in xsDataCollection.getSubWedge():
for xsDataImage in xsDataSubWedge.getImage():
strImagePath = xsDataImage.getPath().getValue()
listImageDirectoryPath.append(os.path.dirname(strImagePath))
listImagePrefix.append(EDUtilsImage.getPrefix(strImagePath))
# TODO: Check that all paths and prefixes are the same
strImageDirectory = listImageDirectoryPath[0]
strPrefix = listImagePrefix[0]
# Remove any "ref-" or "postref-" from the prefix in order to make it fully
# compatitble with DNA standards:
if (strPrefix is not None):
if (strPrefix.startswith("ref-")):
strPrefix = strPrefix[4:]
elif (strPrefix.startswith("postref-")):
strPrefix = strPrefix[8:]
strDNAFileDirectoryPath = os.path.join(strImageDirectory, "%s_dnafiles" % strPrefix)
return strDNAFileDirectoryPath
def createPyArchDNAFilePath(self, _strDNAFileDirectoryPath):
"""
This method translates from a "visitor" path to a "pyarch" path:
/data/visitor/mx415/id14eh1/20100209 -> /data/pyarch/id14eh1/mx415/20100209
"""
strPyarchDNAFilePath = None
listOfDirectories = _strDNAFileDirectoryPath.split(os.sep)
listBeamlines = ["bm14", "id14eh1", "id14eh2", "id14eh3", "id14eh4", "id23eh1", "id23eh2", "id29"]
# Check that we have at least four levels of directories:
if (len(listOfDirectories) > 4):
strDataDirectory = listOfDirectories[ 1 ]
strSecondDirectory = listOfDirectories[ 2 ]
strProposal = None
strBeamline = None
if ((strDataDirectory == "data") and (strSecondDirectory == "visitor")):
strProposal = listOfDirectories[ 3 ]
strBeamline = listOfDirectories[ 4 ]
elif ((strDataDirectory == "data") and (strSecondDirectory in listBeamlines)):
strBeamline = strSecondDirectory
strProposal = listOfDirectories[ 4 ]
if (strProposal != None) and (strBeamline != None):
strPyarchDNAFilePath = os.path.join(os.sep, "data")
strPyarchDNAFilePath = os.path.join(strPyarchDNAFilePath, "pyarch")
strPyarchDNAFilePath = os.path.join(strPyarchDNAFilePath, strBeamline)
strPyarchDNAFilePath = os.path.join(strPyarchDNAFilePath, strProposal)
for strDirectory in listOfDirectories[ 5: ]:
strPyarchDNAFilePath = os.path.join(strPyarchDNAFilePath, strDirectory)
if (strPyarchDNAFilePath is None):
self.WARNING("EDPluginControlInterfaceToMXCuBEv1_3.createPyArchDNAFilePath: path not converted for pyarch: %s " % _strDNAFileDirectoryPath)
return strPyarchDNAFilePath
def createDNAFileDirectory(self, _strDNAFileDirectoryPath):
"""
Create a "DNA-files" directory - if possible.
"""
bSuccess = False
if (_strDNAFileDirectoryPath is not None):
if (os.path.exists(_strDNAFileDirectoryPath)):
self.warning("Removing existing DNA files directory: %s" % _strDNAFileDirectoryPath)
if (os.access(_strDNAFileDirectoryPath, os.W_OK)):
shutil.rmtree(_strDNAFileDirectoryPath)
else:
self.warning("Cannot remove existing DNA files directory!")
if (_strDNAFileDirectoryPath is not None):
# Check if directory one level up is writeable
strDNAFileBaseDirectory = os.path.split(_strDNAFileDirectoryPath)[0]
if (os.access(strDNAFileBaseDirectory, os.W_OK)):
self.DEBUG("Creating DNA files directory: %s" % _strDNAFileDirectoryPath)
os.mkdir(_strDNAFileDirectoryPath)
bSuccess = True
else:
self.warning("Cannot create DNA files directory: %s" % _strDNAFileDirectoryPath)
return bSuccess
def splitHeadDirectory(self, _strPath):
"""
This method works like os.path.split except that it splits the head directory
from the rest of the path. Example:
"/" -> [ None, None]
"/data" -> ["data", None]
"/data/visitor" -> ["data", "visitor"]
"/data/visitor/mx415/id14eh2/20100212" -> ["data", "visitor/mx415/id14eh2/20100212"]
"""
listOfDirectories = _strPath.split(os.sep)
strTail = None
strHead = None
if (len(listOfDirectories) > 1):
strHead = listOfDirectories[1]
if (strHead == ""):
strHead = None
if (len(listOfDirectories) > 1):
for strEntry in listOfDirectories[2:]:
if (strTail is None):
strTail = strEntry
else:
strTail = os.path.join(strTail, strEntry)
return [ strHead, strTail ]
def createOutputFileDictionary(self, _xsDataResultCharacterisation, _strPathToLogFileDirectory=None):
"""
This method creates an XSDataDictionary containing the name and locations of the
characterisation output files.
"""
xsDataDictionaryLogFile = XSDataDictionary()
# Start with the prediction images
xsDataIndexingResult = _xsDataResultCharacterisation.getIndexingResult()
if xsDataIndexingResult is not None:
xsDataGeneratePredictionResult = xsDataIndexingResult.getPredictionResult()
if xsDataGeneratePredictionResult is not None:
listXSDataImagePrediction = xsDataGeneratePredictionResult.getPredictionImage()
for xsDataImagePrediction in listXSDataImagePrediction:
xsDataKeyValuePair = XSDataKeyValuePair()
iPredictionImageNumber = xsDataImagePrediction.getNumber().getValue()
xsDataStringKey = XSDataString("predictionImage_%d" % iPredictionImageNumber)
xsDataStringValue = None
strPredictionImagePath = xsDataImagePrediction.getPath().getValue()
if (_strPathToLogFileDirectory is not None):
strPredictionImageFileName = EDUtilsFile.getBaseName(strPredictionImagePath)
strNewPredictionImagePath = os.path.join(_strPathToLogFileDirectory, strPredictionImageFileName)
EDUtilsFile.copyFile(strPredictionImagePath, strNewPredictionImagePath)
xsDataStringValue = XSDataString(strNewPredictionImagePath)
else:
xsDataStringValue = XSDataString(strPredictionImageFileName)
xsDataKeyValuePair.setKey(xsDataStringKey)
xsDataKeyValuePair.setValue(xsDataStringValue)
xsDataDictionaryLogFile.addKeyValuePair(xsDataKeyValuePair)
# Best log file
strPathToBESTLogFile = None
strPathToExecutiveSummary = None
if _xsDataResultCharacterisation.getStrategyResult() is not None:
if _xsDataResultCharacterisation.getStrategyResult().getBestLogFile() != None:
strPathToBESTLogFile = _xsDataResultCharacterisation.getStrategyResult().getBestLogFile().getPath().getValue()
if strPathToBESTLogFile is not None:
xsDataStringKey = XSDataString("logFileBest")
xsDataStringValue = None
if (_strPathToLogFileDirectory is not None):
strNewBestLogPath = os.path.join(_strPathToLogFileDirectory, "best.log")
EDUtilsFile.copyFile(strPathToBESTLogFile, strNewBestLogPath)
xsDataStringValue = XSDataString(strNewBestLogPath)
else:
xsDataStringValue = XSDataString(strPathToBESTLogFile)
xsDataKeyValuePair = XSDataKeyValuePair()
xsDataKeyValuePair.setKey(xsDataStringKey)
xsDataKeyValuePair.setValue(xsDataStringValue)
xsDataDictionaryLogFile.addKeyValuePair(xsDataKeyValuePair)
if (strPathToExecutiveSummary is not None):
xsDataStringKey = XSDataString("executiveSummary")
xsDataStringValue = None
if (_strPathToLogFileDirectory is not None):
strExecutiveSummaryFileName = EDUtilsFile.getBaseName(strPathToExecutiveSummary)
strNewExecutiveSummaryPath = os.path.join(_strPathToLogFileDirectory, strExecutiveSummaryFileName)
EDUtilsFile.copyFile(strPathToExecutiveSummary, strNewExecutiveSummaryPath)
xsDataStringValue = XSDataString(strNewExecutiveSummaryPath)
# Copy also the executive summary file to "dna_log.txt"...
strNewExecutiveSummaryPath = os.path.join(_strPathToLogFileDirectory, "dna_log.txt")
EDUtilsFile.copyFile(strPathToExecutiveSummary, strNewExecutiveSummaryPath)
else:
xsDataStringValue = XSDataString(strPathToExecutiveSummary)
xsDataKeyValuePair = XSDataKeyValuePair()
xsDataKeyValuePair.setKey(xsDataStringKey)
xsDataKeyValuePair.setValue(xsDataStringValue)
xsDataDictionaryLogFile.addKeyValuePair(xsDataKeyValuePair)
return xsDataDictionaryLogFile
def doFailureActionCharacterisation(self, _edPlugin=None):
"""
retrieve the potential warning messages
retrieve the potential error messages
"""
self.DEBUG("EDPluginControlInterfacev1_3.doFailureActionCharacterisation")
self.setFailure()
# Send failure email message (MXSUP-183):
strSubject = "%s : FAILURE!" % EDUtilsPath.getEdnaSite()
strMessage = "Characterisation FAILURE!"
self.sendEmail(strSubject, strMessage)
def getFluxAndBeamSizeFromISPyB(self, _xsDataFirstImage, _xsDataExperimentalCondition):
"""
This method retrieves the flux and beamsize from ISPyB
"""
xsDataExperimentalCondition = None
if (_xsDataExperimentalCondition is not None):
bFoundValidFlux = False
xsDataExperimentalCondition = _xsDataExperimentalCondition.copy()
xsDataInputRetrieveDataCollection = XSDataInputRetrieveDataCollection()
xsDataInputRetrieveDataCollection.setImage(XSDataImage(_xsDataFirstImage.getPath()))
self.edPluginISPyBRetrieveDataCollection.setDataInput(xsDataInputRetrieveDataCollection)
self.edPluginISPyBRetrieveDataCollection.executeSynchronous()
xsDataResultRetrieveDataCollection = self.edPluginISPyBRetrieveDataCollection.getDataOutput()
if xsDataResultRetrieveDataCollection is not None:
xsDataISPyBDataCollection = xsDataResultRetrieveDataCollection.getDataCollection()
if xsDataISPyBDataCollection is not None:
fFlux = xsDataISPyBDataCollection.getFlux()
if fFlux is not None:
self.screen("ISPyB reports flux to be: %g photons/sec" % fFlux)
if fFlux > self.fFluxThreshold:
xsDataExperimentalCondition.getBeam().setFlux(XSDataFlux(fFlux))
bFoundValidFlux = True
fBeamSizeAtSampleX = xsDataISPyBDataCollection.beamSizeAtSampleX
fBeamSizeAtSampleY = xsDataISPyBDataCollection.beamSizeAtSampleY
if fBeamSizeAtSampleX is not None and fBeamSizeAtSampleY is not None:
self.screen("ISPyB reports beamsize X to be: %.3f mm" % fBeamSizeAtSampleX)
self.screen("ISPyB reports beamsize Y to be: %.3f mm" % fBeamSizeAtSampleY)
xsDataSize = XSDataSize()
xsDataSize.x = XSDataLength(fBeamSizeAtSampleX)
xsDataSize.y = XSDataLength(fBeamSizeAtSampleY)
xsDataExperimentalCondition.getBeam().setSize(xsDataSize)
if not bFoundValidFlux:
self.screen("No valid flux could be retrieved from ISPyB! Trying to obtain flux from input data.")
xsDataBeam = xsDataExperimentalCondition.getBeam()
xsDataBeamFlux = xsDataBeam.getFlux()
if xsDataBeamFlux is not None:
fFluxMXCuBE = xsDataBeamFlux.getValue()
self.screen("MXCuBE reports flux to be: %g photons/sec" % fFluxMXCuBE)
if fFluxMXCuBE < self.fFluxThreshold:
self.screen("MXCuBE flux invalid!")
return xsDataExperimentalCondition
def updateDataInputCharacterisation(self, _xsDataInputCharacterisation):
"""
This method updates the xsDataInputCharacterisation object given as argument with the following
parameters (if available) goven as input:
- Diffraction plan
- Beam size
- Beam flux
- Min exposure time per image
- Max oscillation speed
- Min oscillation width
- Sample information
"""
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.createDataInputCharacterisationFromDataSets")
xsDataCollection = _xsDataInputCharacterisation.getDataCollection()
if (_xsDataInputCharacterisation is not None):
xsDataInputCCP4i = self.getDataInput()
# Update with diffraction plan
xsDiffactionPlan = xsDataInputCCP4i.getDiffractionPlan()
if(xsDiffactionPlan is not None):
xsDataCollection.setDiffractionPlan(xsDiffactionPlan)
# Update the data collection subwedges with additional experimental conditions
for xsDataSubWedge in xsDataCollection.getSubWedge():
xsDataExperimentalCondition = xsDataInputCCP4i.getExperimentalCondition()
if(xsDataExperimentalCondition is not None):
xsDataBeam = xsDataExperimentalCondition.getBeam()
if(xsDataBeam is not None):
xsDataBeamSize = xsDataBeam.getSize()
if(xsDataBeamSize is not None):
xsDataSubWedge.getExperimentalCondition().getBeam().setSize(xsDataBeamSize)
xsDataBeamFlux = xsDataBeam.getFlux()
if(xsDataBeamFlux is not None):
xsDataSubWedge.getExperimentalCondition().getBeam().setFlux(xsDataBeamFlux)
xsDataMinExposureTime = xsDataBeam.getMinExposureTimePerImage()
if(xsDataMinExposureTime is not None):
xsDataSubWedge.getExperimentalCondition().getBeam().setMinExposureTimePerImage(xsDataMinExposureTime)
xsDataGoniostat = xsDataExperimentalCondition.getGoniostat()
if(xsDataGoniostat is not None):
xsDataMaxOscSpeed = xsDataGoniostat.getMaxOscillationSpeed()
if(xsDataMaxOscSpeed is not None):
xsDataSubWedge.getExperimentalCondition().getGoniostat().setMaxOscillationSpeed(xsDataMaxOscSpeed)
xsDataMinOscWidth = xsDataGoniostat.getMinOscillationWidth()
if(xsDataMinOscWidth is not None):
xsDataSubWedge.getExperimentalCondition().getGoniostat().setMinOscillationWidth(xsDataMinOscWidth)
# Update with the sample
xsDataSample = xsDataInputCCP4i.getSample()
if(xsDataSample is not None):
xsDataCollection.setSample(xsDataSample)
def sendEmail(self, _strSubject, _strMessage):
"""Sends an email to the EDNA contact person (if configured)."""
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: Subject = %s" % _strSubject)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: Message:")
self.DEBUG(_strMessage)
if self.strEDNAContactEmail == None:
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: No email address configured!")
elif not EDUtilsPath.getEdnaSite().startswith("ESRF"):
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: Not executed at the ESRF! EDNA_SITE=%s" % EDUtilsPath.getEdnaSite())
else:
try:
self.DEBUG("Sending message to %s." % self.strEDNAContactEmail)
self.DEBUG("Message: %s" % _strMessage)
strMessage = """
EDNA_HOME = %s
EDNA_SITE = %s
PLUGIN_NAME = %s
working_dir = %s
%s
""" % (EDUtilsPath.getEdnaHome(), EDUtilsPath.getEdnaSite(), self.getPluginName(), self.getWorkingDirectory(), _strMessage)
strEmailMsg = ("From: %s\r\nTo: %s\r\nSubject: %s\r\n\r\n%s" % (self.strEDNAEmailSender, \
self.strEDNAContactEmail, \
_strSubject, strMessage))
server = smtplib.SMTP("localhost")
server.sendmail(self.strEDNAEmailSender, self.strEDNAContactEmail, strEmailMsg)
server.quit()
except:
self.ERROR("Error when sending email message!")
self.writeErrorTrace()
def executeSimpleHTML(self, _xsDataResultCharacterisation):
xsDataInputSimpleHTMLPage = XSDataInputSimpleHTMLPage()
xsDataInputSimpleHTMLPage.setCharacterisationResult(_xsDataResultCharacterisation)
self.edPluginExecSimpleHTML.setDataInput(xsDataInputSimpleHTMLPage)
self.edPluginExecSimpleHTML.connectSUCCESS(self.doSuccessSimpleHTML)
self.edPluginExecSimpleHTML.connectFAILURE(self.doFailureSimpleHTML)
self.executePluginSynchronous(self.edPluginExecSimpleHTML)
def doSuccessSimpleHTML(self, _edPlugin=None):
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.doSuccessSimpleHTML...")
self.retrieveSuccessMessages(_edPlugin, "EDPluginControlInterfaceToMXCuBEv1_3.doSuccessSimpleHTML")
self.xsDataResultMXCuBE.setHtmlPage(_edPlugin.getDataOutput().getPathToHTMLFile())
def doFailureSimpleHTML(self, _edPlugin=None):
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.doFailureSimpleHTML...")
class EDPluginControlInterfaceToMXCuBEv1_3(EDPluginControl):
"""
This is the plugin interface to launch the MXv1 characterisation from an MXCuBE gui.
It is for the moment a wrapper for the EDPluginControlCCP4iv1_1 plugin, which also
runs the ISPyB control plugin if a data collection id is available.
"""
EDNA_CONTACT_EMAIL = "contactEmail"
EDNA_EMAIL_SENDER = "emailSender"
def __init__(self):
"""
Initialisation of EDPluginControlInterfaceToMXCuBEv1_3:
- Input data type class : XSDataInputMXCuBE
- Name of default characterisation plugin : EDPluginControlCharacterisationv1_1
"""
EDPluginControl.__init__(self)
self.setXSDataInputClass(XSDataInputMXCuBE)
self.strPluginControlInterface = "EDPluginControlInterfacev1_2"
self.edPluginControlInterface = None
self.strPluginControlISPyB = "EDPluginControlISPyBv1_4"
self.edPluginControlISPyB = None
self.xsDataResultMXCuBE = None
self.xsDataIntegerDataCollectionId = None
self.strPluginExecOutputHTMLName = "EDPluginExecOutputHTMLv1_0"
self.edPluginExecOutputHTML = None
self.strPluginExecSimpleHTMLName = "EDPluginExecSimpleHTMLPagev1_0"
self.edPluginExecSimpleHTML = None
self.strPluginISPyBRetrieveDataCollection = "EDPluginISPyBRetrieveDataCollectionv1_4"
self.edPluginISPyBRetrieveDataCollection = None
self.strEDNAContactEmail = None
self.strEDNAEmailSender = "*****@*****.**"
self.tStart = None
self.tStop = None
self.fFluxThreshold = 1e3
def checkParameters(self):
"""
Checks the mandatory input parameters :
- dataSet
- outputFileDirectory
"""
self.verboseDebug(
"EDPluginControlInterfaceToMXCuBEv1_3.checkParameters")
self.checkMandatoryParameters(self.getDataInput(),
"Data Input is None")
self.checkMandatoryParameters(self.getDataInput().getDataSet(),
"dataSet")
def configure(self):
EDPluginControl.configure(self)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.configure")
self.strEDNAEmailSender = self.config.get(self.EDNA_EMAIL_SENDER,
self.strEDNAEmailSender)
self.strEDNAContactEmail = self.config.get(self.EDNA_CONTACT_EMAIL,
self.strEDNAContactEmail)
def preProcess(self, _edPlugin=None):
"""
This method prepares the input for the CCP4i plugin and loads it.
"""
EDPluginControl.preProcess(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.preProcess...")
self.tStart = time.time()
# self.edPluginExecOutputHTML = self.loadPlugin(self.strPluginExecOutputHTMLName, "OutputHTML")
self.edPluginExecSimpleHTML = self.loadPlugin(
self.strPluginExecSimpleHTMLName, "SimpleHTML")
self.edPluginISPyBRetrieveDataCollection = self.loadPlugin(self.strPluginISPyBRetrieveDataCollection, \
"ISPyBRetrieveDataCollection")
self.xsDataResultMXCuBE = XSDataResultMXCuBE()
def process(self, _edPlugin=None):
EDPluginControl.process(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.process...")
xsDataInputMXCuBE = self.getDataInput()
xsDataInputInterface = XSDataInputInterface()
self.edPluginControlInterface = self.loadPlugin(
self.strPluginControlInterface)
xsDataFirstImage = None
for xsDataSetMXCuBE in xsDataInputMXCuBE.getDataSet():
for xsDataFile in xsDataSetMXCuBE.getImageFile():
xsDataInputInterface.addImagePath(xsDataFile)
if xsDataFirstImage is None:
xsDataFirstImage = xsDataFile
xsDataExperimentalCondition = self.getFluxAndBeamSizeFromISPyB(xsDataFirstImage, \
xsDataInputMXCuBE.getExperimentalCondition())
xsDataInputInterface.setExperimentalCondition(
xsDataExperimentalCondition)
xsDataInputInterface.setDiffractionPlan(
xsDataInputMXCuBE.getDiffractionPlan())
xsDataInputInterface.setSample(xsDataInputMXCuBE.getSample())
xsDataInputInterface.setDataCollectionId(
xsDataInputMXCuBE.getDataCollectionId())
self.edPluginControlInterface.setDataInput(xsDataInputInterface)
if self.edPluginControlInterface is not None:
self.connectProcess(
self.edPluginControlInterface.executeSynchronous)
self.edPluginControlInterface.connectSUCCESS(
self.doSuccessActionInterface)
self.edPluginControlInterface.connectFAILURE(
self.doFailureActionInterface)
def finallyProcess(self, _edPlugin=None):
EDPluginControl.finallyProcess(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.postProcess...")
self.setDataOutput(self.xsDataResultMXCuBE)
def doSuccessActionInterface(self, _edPlugin=None):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionInterface...")
self.retrieveSuccessMessages(
self.edPluginControlInterface,
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionInterface")
# Send success email message (MXSUP-183):
self.tStop = time.time()
strSubject = "SUCCESS"
strMessage = "Characterisation success!"
self.storeResultsInISPyB(strSubject, strMessage)
def doFailureActionInterface(self, _edPlugin=None):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doFailureActionInterface...")
# Send failure email message (MXSUP-183):
self.tStop = time.time()
strSubject = "FAILURE"
strMessage = "Characterisation FAILURE!"
self.storeResultsInISPyB(strSubject, strMessage)
# self.setFailure()
# xsDataResultCharacterisation = None
# if self.edPluginControlInterface.hasDataOutput("characterisation"):
# xsDataResultCharacterisation = self.edPluginControlInterface.getDataOutput("characterisation")[0]
# # Execute plugin which creates a simple HTML page
# self.executeSimpleHTML(xsDataResultCharacterisation)
# xsDataResultCharacterisation = self.edPluginControlInterface.dataOutput.resultCharacterisation
# if xsDataResultCharacterisation is not None:
# self.xsDataResultMXCuBE.characterisationResult = xsDataResultCharacterisation
# if xsDataResultCharacterisation.getStatusMessage():
# strMessage += "\n\n"
# strMessage += xsDataResultCharacterisation.getStatusMessage().getValue()
# if xsDataResultCharacterisation.getShortSummary():
# strMessage += "\n\n"
# strMessage += xsDataResultCharacterisation.getShortSummary().getValue()
# self.sendEmail(strSubject, strMessage)
def storeResultsInISPyB(self, _strSubject, _strMessage):
strSubject = _strSubject
strMessage = _strMessage
xsDataResultCharacterisation = self.edPluginControlInterface.getDataOutput(
).getResultCharacterisation()
self.xsDataResultMXCuBE.setCharacterisationResult(
xsDataResultCharacterisation)
xsDataResultControlISPyB = self.edPluginControlInterface.getDataOutput(
).getResultControlISPyB()
if xsDataResultControlISPyB != None:
self.xsDataResultMXCuBE.setScreeningId(
xsDataResultControlISPyB.getScreeningId())
if xsDataResultCharacterisation != None:
self.xsDataResultMXCuBE.characterisationResult = xsDataResultCharacterisation
strPathCharacterisationResult = os.path.join(
self.getWorkingDirectory(), "CharacterisationResult.xml")
xsDataResultCharacterisation.exportToFile(
strPathCharacterisationResult)
self.xsDataResultMXCuBE.setListOfOutputFiles(
XSDataString(strPathCharacterisationResult))
# For the moment, create "DNA" style output directory
strPathToDNAFileDirectory = self.createDNAFileDirectoryPath(
xsDataResultCharacterisation)
xsDataDictionaryLogFile = None
if not EDUtilsPath.isALBA:
if (self.createDNAFileDirectory(strPathToDNAFileDirectory)):
xsDataDictionaryLogFile = self.createOutputFileDictionary(
xsDataResultCharacterisation,
strPathToDNAFileDirectory)
strPyArchPathToDNAFileDirectory = EDHandlerESRFPyarchv1_0.createPyarchFilePath(
strPathToDNAFileDirectory)
if (self.createDNAFileDirectory(strPyArchPathToDNAFileDirectory)):
xsDataDictionaryLogFile = self.createOutputFileDictionary(
xsDataResultCharacterisation,
strPyArchPathToDNAFileDirectory)
self.xsDataResultMXCuBE.setOutputFileDictionary(
xsDataDictionaryLogFile)
if xsDataResultCharacterisation.getStatusMessage():
strMessage += "\n\n"
strMessage += xsDataResultCharacterisation.getStatusMessage(
).getValue()
if xsDataResultCharacterisation.getShortSummary():
strMessage += "\n\n"
strMessage += xsDataResultCharacterisation.getShortSummary(
).getValue()
self.sendEmail(strSubject, strMessage)
# Fix for bug EDNA-55 : If burning strategy EDNA2html shouldn't be run
bRunExecOutputHTML = False
xsDataInputMXCuBE = self.getDataInput()
xsDataDiffractionPlan = xsDataInputMXCuBE.getDiffractionPlan()
if xsDataDiffractionPlan.getStrategyOption() is not None:
strStrategyOption = xsDataDiffractionPlan.getStrategyOption(
).getValue()
if strStrategyOption.find("-DamPar") != -1:
bRunExecOutputHTML = False
if (self.edPluginExecOutputHTML
is not None) and bRunExecOutputHTML:
self.edPluginExecOutputHTML.setDataInput(
XSDataFile(XSDataString(strPathToDNAFileDirectory)),
"dnaFileDirectory")
self.edPluginExecOutputHTML.execute()
# Fix for bug MXSUP-251: Put the BEST .par file in the EDNA characterisation root directory
xsDataIntegrationResult = xsDataResultCharacterisation.getIntegrationResult(
)
if xsDataIntegrationResult:
listXSDataIntegrationSubWedgeResult = xsDataIntegrationResult.getIntegrationSubWedgeResult(
)
for xsDataIntegrationSubWedgeResult in listXSDataIntegrationSubWedgeResult:
if xsDataIntegrationSubWedgeResult.getBestfilePar(
) is not None:
strBestfilePar = xsDataIntegrationSubWedgeResult.getBestfilePar(
).getValue()
# Put the file one directory above the mxCuBE v1.3 plugin working directory:
strDir = os.path.dirname(self.getWorkingDirectory())
strPath = os.path.join(strDir, "bestfile.par")
EDUtilsFile.writeFile(strPath, strBestfilePar)
break
# Execute plugin which creates a simple HTML page
self.executeSimpleHTML(xsDataResultCharacterisation)
# Upload the best wilson plot path to ISPyB
strBestWilsonPlotPath = EDHandlerXSDataISPyBv1_4.getBestWilsonPlotPath(
xsDataResultCharacterisation)
if strBestWilsonPlotPath is not None and strPyArchPathToDNAFileDirectory is not None:
# Copy wilson path to Pyarch
strBestWilsonPlotPyarchPath = os.path.join(
strPyArchPathToDNAFileDirectory,
os.path.basename(strBestWilsonPlotPath))
if not os.path.exists(strBestWilsonPlotPyarchPath):
if not os.path.exists(
os.path.dirname(strBestWilsonPlotPyarchPath)):
os.makedirs(
os.path.dirname(strBestWilsonPlotPyarchPath), 755)
shutil.copy(strBestWilsonPlotPath,
strBestWilsonPlotPyarchPath)
self.DEBUG("Best wilson pyarch path: %s " %
strBestWilsonPlotPyarchPath)
if self.edPluginControlInterface.dataOutput.resultControlISPyB is not None:
xsDataInputISPyBSetBestWilsonPlotPath = XSDataInputISPyBSetBestWilsonPlotPath(
)
xsDataInputISPyBSetBestWilsonPlotPath.dataCollectionId = self.edPluginControlInterface.dataOutput.resultControlISPyB.dataCollectionId
xsDataInputISPyBSetBestWilsonPlotPath.bestWilsonPlotPath = XSDataString(
strBestWilsonPlotPyarchPath)
edPluginSetBestWilsonPlotPath = self.loadPlugin(
"EDPluginISPyBSetBestWilsonPlotPathv1_4",
"ISPyBSetBestWilsonPlotPath")
edPluginSetBestWilsonPlotPath.dataInput = xsDataInputISPyBSetBestWilsonPlotPath
edPluginSetBestWilsonPlotPath.executeSynchronous()
def doSuccessActionISPyB(self, _edPlugin):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionISPyB...")
self.retrieveSuccessMessages(
self.edPluginControlISPyB,
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionISPyB")
def doFailureActionISPyB(self, _edPlugin=None):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doFailureActionISpyB...")
self.retrieveFailureMessages(
self.edPluginControlISPyB,
"EDPluginControlInterfaceToMXCuBEv1_3.doFailureActionISpyB")
# Send failure email message (MXSUP-183):
strSubject = "%s : FAILURE!" % EDUtilsPath.getEdnaSite()
strMessage = "ISPyB FAILURE!"
self.sendEmail(strSubject, strMessage)
def createDNAFileDirectoryPath(self, _xsDataResultCharacterisation):
"""
This method creates a "DNA" style directory path, i.e. in the same directory were the
images are located a new directory is created with the following convention:
dnafiles_prefix_runNumber
The path to this directory is returned if the directory was successfully created.
"""
# First extract all reference image directory paths and names
xsDataCollection = _xsDataResultCharacterisation.getDataCollection()
listImageDirectoryPath = []
listImagePrefix = []
for xsDataSubWedge in xsDataCollection.getSubWedge():
for xsDataImage in xsDataSubWedge.getImage():
strImagePath = xsDataImage.getPath().getValue()
listImageDirectoryPath.append(os.path.dirname(strImagePath))
listImagePrefix.append(EDUtilsImage.getPrefix(strImagePath))
# TODO: Check that all paths and prefixes are the same
strImageDirectory = listImageDirectoryPath[0]
strPrefix = listImagePrefix[0]
# Remove any "ref-" or "postref-" from the prefix in order to make it fully
# compatitble with DNA standards:
if (strPrefix is not None):
if (strPrefix.startswith("ref-")):
strPrefix = strPrefix[4:]
elif (strPrefix.startswith("postref-")):
strPrefix = strPrefix[8:]
strDNAFileDirectoryPath = os.path.join(strImageDirectory,
"%s_dnafiles" % strPrefix)
return strDNAFileDirectoryPath
def createDNAFileDirectory(self, _strDNAFileDirectoryPath):
"""
Create a "DNA-files" directory - if possible.
"""
bSuccess = False
if (_strDNAFileDirectoryPath is not None):
if (os.path.exists(_strDNAFileDirectoryPath)):
self.warning("Removing existing DNA files directory: %s" %
_strDNAFileDirectoryPath)
if (os.access(_strDNAFileDirectoryPath, os.W_OK)):
shutil.rmtree(_strDNAFileDirectoryPath)
else:
self.warning("Cannot remove existing DNA files directory!")
if (_strDNAFileDirectoryPath is not None):
# Check if directory one level up is writeable
strDNAFileBaseDirectory = os.path.split(
_strDNAFileDirectoryPath)[0]
if (os.access(strDNAFileBaseDirectory, os.W_OK)):
self.DEBUG("Creating DNA files directory: %s" %
_strDNAFileDirectoryPath)
os.makedirs(_strDNAFileDirectoryPath, mode=0o755)
bSuccess = True
else:
self.warning("Cannot create DNA files directory: %s" %
_strDNAFileDirectoryPath)
return bSuccess
def splitHeadDirectory(self, _strPath):
"""
This method works like os.path.split except that it splits the head directory
from the rest of the path. Example:
"/" -> [ None, None]
"/data" -> ["data", None]
"/data/visitor" -> ["data", "visitor"]
"/data/visitor/mx415/id14eh2/20100212" -> ["data", "visitor/mx415/id14eh2/20100212"]
"""
listOfDirectories = _strPath.split(os.sep)
strTail = None
strHead = None
if (len(listOfDirectories) > 1):
strHead = listOfDirectories[1]
if (strHead == ""):
strHead = None
if (len(listOfDirectories) > 1):
for strEntry in listOfDirectories[2:]:
if (strTail is None):
strTail = strEntry
else:
strTail = os.path.join(strTail, strEntry)
return [strHead, strTail]
def createOutputFileDictionary(self,
_xsDataResultCharacterisation,
_strPathToLogFileDirectory=None):
"""
This method creates an XSDataDictionary containing the name and locations of the
characterisation output files.
"""
xsDataDictionaryLogFile = XSDataDictionary()
# Start with the prediction images
xsDataIndexingResult = _xsDataResultCharacterisation.getIndexingResult(
)
if xsDataIndexingResult is not None:
xsDataGeneratePredictionResult = xsDataIndexingResult.getPredictionResult(
)
if xsDataGeneratePredictionResult is not None:
listXSDataImagePrediction = xsDataGeneratePredictionResult.getPredictionImage(
)
for xsDataImagePrediction in listXSDataImagePrediction:
xsDataKeyValuePair = XSDataKeyValuePair()
iPredictionImageNumber = xsDataImagePrediction.getNumber(
).getValue()
xsDataStringKey = XSDataString("predictionImage_%d" %
iPredictionImageNumber)
xsDataStringValue = None
strPredictionImagePath = xsDataImagePrediction.getPath(
).getValue()
if (_strPathToLogFileDirectory is not None):
strPredictionImageFileName = EDUtilsFile.getBaseName(
strPredictionImagePath)
strNewPredictionImagePath = os.path.join(
_strPathToLogFileDirectory,
strPredictionImageFileName)
EDUtilsFile.copyFile(strPredictionImagePath,
strNewPredictionImagePath)
xsDataStringValue = XSDataString(
strNewPredictionImagePath)
else:
xsDataStringValue = XSDataString(
strPredictionImageFileName)
xsDataKeyValuePair.setKey(xsDataStringKey)
xsDataKeyValuePair.setValue(xsDataStringValue)
xsDataDictionaryLogFile.addKeyValuePair(xsDataKeyValuePair)
# Best log file
strPathToBESTLogFile = None
strPathToExecutiveSummary = None
if _xsDataResultCharacterisation.getStrategyResult() is not None:
if _xsDataResultCharacterisation.getStrategyResult(
).getBestLogFile() != None:
strPathToBESTLogFile = _xsDataResultCharacterisation.getStrategyResult(
).getBestLogFile().getPath().getValue()
if strPathToBESTLogFile is not None:
xsDataStringKey = XSDataString("logFileBest")
xsDataStringValue = None
if (_strPathToLogFileDirectory is not None):
strNewBestLogPath = os.path.join(
_strPathToLogFileDirectory, "best.log")
EDUtilsFile.copyFile(strPathToBESTLogFile,
strNewBestLogPath)
xsDataStringValue = XSDataString(strNewBestLogPath)
else:
xsDataStringValue = XSDataString(strPathToBESTLogFile)
xsDataKeyValuePair = XSDataKeyValuePair()
xsDataKeyValuePair.setKey(xsDataStringKey)
xsDataKeyValuePair.setValue(xsDataStringValue)
xsDataDictionaryLogFile.addKeyValuePair(xsDataKeyValuePair)
if (strPathToExecutiveSummary is not None):
xsDataStringKey = XSDataString("executiveSummary")
xsDataStringValue = None
if (_strPathToLogFileDirectory is not None):
strExecutiveSummaryFileName = EDUtilsFile.getBaseName(
strPathToExecutiveSummary)
strNewExecutiveSummaryPath = os.path.join(
_strPathToLogFileDirectory,
strExecutiveSummaryFileName)
EDUtilsFile.copyFile(strPathToExecutiveSummary,
strNewExecutiveSummaryPath)
xsDataStringValue = XSDataString(
strNewExecutiveSummaryPath)
# Copy also the executive summary file to "dna_log.txt"...
strNewExecutiveSummaryPath = os.path.join(
_strPathToLogFileDirectory, "dna_log.txt")
EDUtilsFile.copyFile(strPathToExecutiveSummary,
strNewExecutiveSummaryPath)
else:
xsDataStringValue = XSDataString(strPathToExecutiveSummary)
xsDataKeyValuePair = XSDataKeyValuePair()
xsDataKeyValuePair.setKey(xsDataStringKey)
xsDataKeyValuePair.setValue(xsDataStringValue)
xsDataDictionaryLogFile.addKeyValuePair(xsDataKeyValuePair)
return xsDataDictionaryLogFile
def doFailureActionCharacterisation(self, _edPlugin=None):
"""
retrieve the potential warning messages
retrieve the potential error messages
"""
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doFailureActionCharacterisation"
)
self.setFailure()
# Send failure email message (MXSUP-183):
strSubject = "%s : FAILURE!" % EDUtilsPath.getEdnaSite()
strMessage = "Characterisation FAILURE!"
self.sendEmail(strSubject, strMessage)
def getFluxAndBeamSizeFromISPyB(self, _xsDataFirstImage,
_xsDataExperimentalCondition):
"""
This method retrieves the flux and beamsize from ISPyB
"""
xsDataExperimentalCondition = None
if (_xsDataExperimentalCondition is not None):
bFoundValidFlux = False
xsDataExperimentalCondition = _xsDataExperimentalCondition.copy()
xsDataInputRetrieveDataCollection = XSDataInputRetrieveDataCollection(
)
xsDataInputRetrieveDataCollection.setImage(
XSDataImage(_xsDataFirstImage.getPath()))
self.edPluginISPyBRetrieveDataCollection.setDataInput(
xsDataInputRetrieveDataCollection)
self.edPluginISPyBRetrieveDataCollection.executeSynchronous()
xsDataResultRetrieveDataCollection = self.edPluginISPyBRetrieveDataCollection.getDataOutput(
)
if xsDataResultRetrieveDataCollection is not None:
xsDataISPyBDataCollection = xsDataResultRetrieveDataCollection.getDataCollection(
)
if xsDataISPyBDataCollection is not None:
fFlux = xsDataISPyBDataCollection.getFlux_end()
if fFlux is not None:
self.screen(
"ISPyB reports flux to be: %g photons/sec" % fFlux)
if fFlux > self.fFluxThreshold:
xsDataExperimentalCondition.getBeam().setFlux(
XSDataFlux(fFlux))
bFoundValidFlux = True
fBeamSizeAtSampleX = xsDataISPyBDataCollection.beamSizeAtSampleX
fBeamSizeAtSampleY = xsDataISPyBDataCollection.beamSizeAtSampleY
if fBeamSizeAtSampleX is not None and fBeamSizeAtSampleY is not None:
self.screen("ISPyB reports beamsize X to be: %.3f mm" %
fBeamSizeAtSampleX)
self.screen("ISPyB reports beamsize Y to be: %.3f mm" %
fBeamSizeAtSampleY)
xsDataSize = XSDataSize()
xsDataSize.x = XSDataLength(fBeamSizeAtSampleX)
xsDataSize.y = XSDataLength(fBeamSizeAtSampleY)
xsDataExperimentalCondition.getBeam().setSize(
xsDataSize)
# Get transmission if it's not already there
if xsDataExperimentalCondition.beam.transmission is None:
fTransmission = xsDataISPyBDataCollection.transmission
xsDataExperimentalCondition.beam.transmission = XSDataDouble(
fTransmission)
if not bFoundValidFlux:
self.screen(
"No valid flux could be retrieved from ISPyB! Trying to obtain flux from input data."
)
xsDataBeam = xsDataExperimentalCondition.getBeam()
xsDataBeamFlux = xsDataBeam.getFlux()
if xsDataBeamFlux is not None:
fFluxMXCuBE = xsDataBeamFlux.getValue()
self.screen("MXCuBE reports flux to be: %g photons/sec" %
fFluxMXCuBE)
if fFluxMXCuBE < self.fFluxThreshold:
self.screen(
"MXCuBE flux lower than threshold flux %g photons/s!"
% self.fFluxThreshold)
self.screen("Forcing flux to 0.0 photons/s")
xsDataExperimentalCondition.getBeam().setFlux(
XSDataFlux(0.0))
else:
# Force missing flux to 0.0
self.screen(
"No flux neither in ISPyB nor in mxCuBE, forcing flux to 0.0 photon/s"
)
xsDataExperimentalCondition.getBeam().setFlux(
XSDataFlux(0.0))
return xsDataExperimentalCondition
def updateDataInputCharacterisation(self, _xsDataInputCharacterisation):
"""
This method updates the xsDataInputCharacterisation object given as argument with the following
parameters (if available) goven as input:
- Diffraction plan
- Beam size
- Beam flux
- Min exposure time per image
- Max oscillation speed
- Min oscillation width
- Sample information
"""
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.createDataInputCharacterisationFromDataSets"
)
xsDataCollection = _xsDataInputCharacterisation.getDataCollection()
if (_xsDataInputCharacterisation is not None):
xsDataInputCCP4i = self.getDataInput()
# Update with diffraction plan
xsDiffactionPlan = xsDataInputCCP4i.getDiffractionPlan()
if (xsDiffactionPlan is not None):
xsDataCollection.setDiffractionPlan(xsDiffactionPlan)
# Update the data collection subwedges with additional experimental conditions
for xsDataSubWedge in xsDataCollection.getSubWedge():
xsDataExperimentalCondition = xsDataInputCCP4i.getExperimentalCondition(
)
if (xsDataExperimentalCondition is not None):
xsDataBeam = xsDataExperimentalCondition.getBeam()
if (xsDataBeam is not None):
xsDataBeamSize = xsDataBeam.getSize()
if (xsDataBeamSize is not None):
xsDataSubWedge.getExperimentalCondition().getBeam(
).setSize(xsDataBeamSize)
xsDataBeamFlux = xsDataBeam.getFlux()
if (xsDataBeamFlux is not None):
xsDataSubWedge.getExperimentalCondition().getBeam(
).setFlux(xsDataBeamFlux)
xsDataMinExposureTime = xsDataBeam.getMinExposureTimePerImage(
)
if (xsDataMinExposureTime is not None):
xsDataSubWedge.getExperimentalCondition().getBeam(
).setMinExposureTimePerImage(xsDataMinExposureTime)
xsDataGoniostat = xsDataExperimentalCondition.getGoniostat(
)
if (xsDataGoniostat is not None):
xsDataMaxOscSpeed = xsDataGoniostat.getMaxOscillationSpeed(
)
if (xsDataMaxOscSpeed is not None):
xsDataSubWedge.getExperimentalCondition(
).getGoniostat().setMaxOscillationSpeed(
xsDataMaxOscSpeed)
xsDataMinOscWidth = xsDataGoniostat.getMinOscillationWidth(
)
if (xsDataMinOscWidth is not None):
xsDataSubWedge.getExperimentalCondition(
).getGoniostat().setMinOscillationWidth(
xsDataMinOscWidth)
# Update with the sample
xsDataSample = xsDataInputCCP4i.getSample()
if (xsDataSample is not None):
xsDataCollection.setSample(xsDataSample)
def getBeamlineProposalFromPath(self, _strPathToImage):
"""ESRF specific code for extracting the beamline name and prefix from the path"""
listPath = _strPathToImage.split("/")
strPrefix = EDUtilsImage.getPrefix(_strPathToImage).replace("ref-", "")
if listPath[2] == "visitor":
strBeamline = listPath[4]
strProposal = listPath[3]
elif listPath[3] == "inhouse":
strBeamline = listPath[2]
strProposal = listPath[4]
else:
strBeamline = "nobeamline"
strProposal = "noproposal"
return (strBeamline, strProposal, strPrefix)
def sendEmail(self, _strSubject, _strMessage):
"""Sends an email to the EDNA contact person (if configured)."""
strTime = "%.1f s" % (self.tStop - self.tStart)
if EDUtilsPath.isESRF():
strPathImage = None
for dataSet in self.dataInput.dataSet:
for imageFile in dataSet.imageFile:
strPathImage = imageFile.path.value
break
if strPathImage is not None:
(strBeamline, strProposal,
strPrefix) = self.getBeamlineProposalFromPath(strPathImage)
else:
strBeamline = "Unknown"
strProposal = "Unknown"
strPrefix = "Unknown"
strHost = socket.gethostname()
strSubject = "EDNA ch %s %s %s %s %s (%s)" % (
_strSubject, strBeamline, strProposal, strPrefix, strHost,
strTime)
else:
strSubject = "EDNA %s : %s (%s)" % (
_strSubject, EDUtilsPath.getEdnaSite(), strTime)
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: Subject = %s" %
strSubject)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: Message:")
self.DEBUG(_strMessage)
if self.strEDNAContactEmail == None:
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: No email address configured!"
)
elif not EDUtilsPath.getEdnaSite().startswith("ESRF"):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: Not executed at the ESRF! EDNA_SITE=%s"
% EDUtilsPath.getEdnaSite())
else:
try:
self.DEBUG("Sending message to %s." % self.strEDNAContactEmail)
self.DEBUG("Message: %s" % _strMessage)
strMessage = "EDNA_HOME = %s\n" % EDUtilsPath.getEdnaHome()
strMessage += "EDNA_SITE = %s\n" % EDUtilsPath.getEdnaSite()
strMessage += "PLUGIN_NAME = %s\n" % self.getPluginName()
strMessage += "working_dir = %s\n\n" % self.getWorkingDirectory(
)
strMessage += "Reference images:\n"
xsDataInputMXCuBE = self.getDataInput()
for xsDataSetMXCuBE in xsDataInputMXCuBE.getDataSet():
for xsDataFile in xsDataSetMXCuBE.getImageFile():
strMessage += "%s\n" % xsDataFile.getPath().getValue()
strMessage += "\n"
strMessage += _strMessage
strEmailMsg = ("From: %s\r\nTo: %s\r\nSubject: %s\r\n\r\n%s" % (self.strEDNAEmailSender, \
self.strEDNAContactEmail, \
strSubject, strMessage))
server = smtplib.SMTP("localhost")
server.sendmail(self.strEDNAEmailSender,
self.strEDNAContactEmail, strEmailMsg)
server.quit()
except:
self.ERROR("Error when sending email message!")
self.writeErrorTrace()
def executeSimpleHTML(self, _xsDataResultCharacterisation):
xsDataInputSimpleHTMLPage = XSDataInputSimpleHTMLPage()
xsDataInputSimpleHTMLPage.setCharacterisationResult(
_xsDataResultCharacterisation)
self.edPluginExecSimpleHTML.setDataInput(xsDataInputSimpleHTMLPage)
self.edPluginExecSimpleHTML.connectSUCCESS(self.doSuccessSimpleHTML)
self.edPluginExecSimpleHTML.connectFAILURE(self.doFailureSimpleHTML)
self.executePluginSynchronous(self.edPluginExecSimpleHTML)
def doSuccessSimpleHTML(self, _edPlugin=None):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessSimpleHTML...")
self.retrieveSuccessMessages(
_edPlugin,
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessSimpleHTML")
# Copy files from working directory
if self.dataInput.htmlDir is None:
self.xsDataResultMXCuBE.setHtmlPage(
_edPlugin.dataOutput.pathToHTMLFile)
else:
htmlDir = self.dataInput.htmlDir.path.value
if os.path.exists(htmlDir):
# Potentially unsafe but very unlikely that this will cause problems
htmlDir = tempfile.mktemp(prefix=os.path.basename(htmlDir),
dir=os.path.dirname(htmlDir))
shutil.copytree(
os.path.dirname(
_edPlugin.dataOutput.pathToHTMLFile.path.value), htmlDir)
htmlPage = os.path.join(
htmlDir,
os.path.basename(
_edPlugin.dataOutput.pathToHTMLFile.path.value))
self.xsDataResultMXCuBE.setHtmlPage(
XSDataFile(XSDataString(htmlPage)))
def doFailureSimpleHTML(self, _edPlugin=None):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doFailureSimpleHTML...")
class EDPluginControlInterfaceToMXCuBEv1_3(EDPluginControl):
"""
This is the plugin interface to launch the MXv1 characterisation from an MXCuBE gui.
It is for the moment a wrapper for the EDPluginControlCCP4iv1_1 plugin, which also
runs the ISPyB control plugin if a data collection id is available.
"""
EDNA_CONTACT_EMAIL = "contactEmail"
EDNA_EMAIL_SENDER = "emailSender"
def __init__(self):
"""
Initialisation of EDPluginControlInterfaceToMXCuBEv1_3:
- Input data type class : XSDataInputMXCuBE
- Name of default characterisation plugin : EDPluginControlCharacterisationv1_1
"""
EDPluginControl.__init__(self)
self.setXSDataInputClass(XSDataInputMXCuBE)
self.strPluginControlInterface = "EDPluginControlInterfacev1_2"
self.edPluginControlInterface = None
self.strPluginControlISPyB = "EDPluginControlISPyBv1_4"
self.edPluginControlISPyB = None
self.xsDataResultMXCuBE = None
self.xsDataIntegerDataCollectionId = None
self.strPluginExecOutputHTMLName = "EDPluginExecOutputHTMLv1_0"
self.edPluginExecOutputHTML = None
self.strPluginExecSimpleHTMLName = "EDPluginExecSimpleHTMLPagev1_0"
self.edPluginExecSimpleHTML = None
self.strEDNAContactEmail = None
self.strEDNAEmailSender = "*****@*****.**"
self.tStart = None
self.tStop = None
def checkParameters(self):
"""
Checks the mandatory input parameters :
- dataSet
- outputFileDirectory
"""
self.verboseDebug(
"EDPluginControlInterfaceToMXCuBEv1_3.checkParameters")
self.checkMandatoryParameters(self.getDataInput(),
"Data Input is None")
self.checkMandatoryParameters(self.getDataInput().getDataSet(),
"dataSet")
def configure(self):
EDPluginControl.configure(self)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.configure")
xsPluginItem = self.getConfiguration()
if xsPluginItem == None:
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.configure: No plugin item defined."
)
else:
self.strEDNAContactEmail = EDConfiguration.getStringParamValue(
xsPluginItem,
EDPluginControlInterfaceToMXCuBEv1_3.EDNA_CONTACT_EMAIL)
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.configure: EDNAContactEmail = %s"
% self.strEDNAContactEmail)
strEDNAEmailSender = EDConfiguration.getStringParamValue(
xsPluginItem, self.EDNA_EMAIL_SENDER)
if strEDNAEmailSender:
self.strEDNAEmailSender = strEDNAEmailSender
def preProcess(self, _edPlugin=None):
"""
This method prepares the input for the CCP4i plugin and loads it.
"""
EDPluginControl.preProcess(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.preProcess...")
self.tStart = time.time()
xsDataInputMXCuBE = self.getDataInput()
xsDataInputInterface = XSDataInputInterface()
self.edPluginControlInterface = self.loadPlugin(
self.strPluginControlInterface)
for xsDataSetMXCuBE in xsDataInputMXCuBE.getDataSet():
for xsDataFile in xsDataSetMXCuBE.getImageFile():
xsDataInputInterface.addImagePath(xsDataFile)
xsDataInputInterface.setExperimentalCondition(
xsDataInputMXCuBE.getExperimentalCondition())
xsDataInputInterface.setDiffractionPlan(
xsDataInputMXCuBE.getDiffractionPlan())
xsDataInputInterface.setSample(xsDataInputMXCuBE.getSample())
xsDataInputInterface.setDataCollectionId(
xsDataInputMXCuBE.getDataCollectionId())
self.edPluginControlInterface.setDataInput(xsDataInputInterface)
#self.edPluginExecOutputHTML = self.loadPlugin(self.strPluginExecOutputHTMLName, "OutputHTML")
self.edPluginExecSimpleHTML = self.loadPlugin(
self.strPluginExecSimpleHTMLName, "SimpleHTML")
self.xsDataResultMXCuBE = XSDataResultMXCuBE()
def process(self, _edPlugin=None):
EDPluginControl.process(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.process...")
if self.edPluginControlInterface is not None:
self.connectProcess(
self.edPluginControlInterface.executeSynchronous)
self.edPluginControlInterface.connectSUCCESS(
self.doSuccessActionInterface)
self.edPluginControlInterface.connectFAILURE(
self.doFailureActionInterface)
def finallyProcess(self, _edPlugin=None):
EDPluginControl.finallyProcess(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.postProcess...")
self.setDataOutput(self.xsDataResultMXCuBE)
def doSuccessActionInterface(self, _edPlugin=None):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionInterface...")
self.retrieveSuccessMessages(
self.edPluginControlInterface,
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionInterface")
xsDataResultCharacterisation = self.edPluginControlInterface.getDataOutput(
).getResultCharacterisation()
self.xsDataResultMXCuBE.setCharacterisationResult(
xsDataResultCharacterisation)
xsDataResultControlISPyB = self.edPluginControlInterface.getDataOutput(
).getResultControlISPyB()
if xsDataResultControlISPyB != None:
self.xsDataResultMXCuBE.setScreeningId(
xsDataResultControlISPyB.getScreeningId())
if xsDataResultCharacterisation != None:
strPathCharacterisationResult = os.path.join(
self.getWorkingDirectory(), "CharacterisationResult.xml")
xsDataResultCharacterisation.exportToFile(
strPathCharacterisationResult)
self.xsDataResultMXCuBE.setListOfOutputFiles(
XSDataString(strPathCharacterisationResult))
# For the moment, create "DNA" style output directory
strPathToDNAFileDirectory = self.createDNAFileDirectoryPath(
xsDataResultCharacterisation)
xsDataDictionaryLogFile = None
if (self.createDNAFileDirectory(strPathToDNAFileDirectory)):
xsDataDictionaryLogFile = self.createOutputFileDictionary(
xsDataResultCharacterisation, strPathToDNAFileDirectory)
strPyArchPathToDNAFileDirectory = self.createPyArchDNAFilePath(
strPathToDNAFileDirectory)
if (self.createDNAFileDirectory(strPyArchPathToDNAFileDirectory)):
xsDataDictionaryLogFile = self.createOutputFileDictionary(
xsDataResultCharacterisation,
strPyArchPathToDNAFileDirectory)
self.xsDataResultMXCuBE.setOutputFileDictionary(
xsDataDictionaryLogFile)
# Send success email message (MXSUP-183):
self.tStop = time.time()
strSubject = "%s : SUCCESS! (%.1f s)" % (EDUtilsPath.getEdnaSite(),
self.tStop - self.tStart)
strMessage = "Characterisation success!"
if xsDataResultCharacterisation.getStatusMessage():
strMessage += "\n\n"
strMessage += xsDataResultCharacterisation.getStatusMessage(
).getValue()
if xsDataResultCharacterisation.getShortSummary():
strMessage += "\n\n"
strMessage += xsDataResultCharacterisation.getShortSummary(
).getValue()
self.sendEmail(strSubject, strMessage)
# Fix for bug EDNA-55 : If burning strategy EDNA2html shouldn't be run
bRunExecOutputHTML = False
xsDataInputMXCuBE = self.getDataInput()
xsDataDiffractionPlan = xsDataInputMXCuBE.getDiffractionPlan()
if xsDataDiffractionPlan.getStrategyOption() is not None:
strStrategyOption = xsDataDiffractionPlan.getStrategyOption(
).getValue()
if strStrategyOption.find("-DamPar") != -1:
bRunExecOutputHTML = False
if (self.edPluginExecOutputHTML
is not None) and bRunExecOutputHTML:
self.edPluginExecOutputHTML.setDataInput(
XSDataFile(XSDataString(strPathToDNAFileDirectory)),
"dnaFileDirectory")
self.edPluginExecOutputHTML.execute()
# Fix for bug MXSUP-251: Put the BEST .par file in the EDNA characterisation root directory
xsDataIntegrationResult = xsDataResultCharacterisation.getIntegrationResult(
)
if xsDataIntegrationResult:
listXSDataIntegrationSubWedgeResult = xsDataIntegrationResult.getIntegrationSubWedgeResult(
)
if listXSDataIntegrationSubWedgeResult:
if listXSDataIntegrationSubWedgeResult != []:
strBestfilePar = listXSDataIntegrationSubWedgeResult[
0].getBestfilePar().getValue()
# Put the file one directory above the mxCuBE v1.3 plugin working directory:
strDir = os.path.dirname(self.getWorkingDirectory())
strPath = os.path.join(strDir, "bestfile.par")
EDUtilsFile.writeFile(strPath, strBestfilePar)
# Execute plugin which creates a simple HTML page
self.executeSimpleHTML(xsDataResultCharacterisation)
def doFailureActionInterface(self, _edPlugin=None):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doFailureActionInterface...")
self.setFailure()
xsDataResultCharacterisation = None
if self.edPluginControlInterface.hasDataOutput("characterisation"):
xsDataResultCharacterisation = self.edPluginControlInterface.getDataOutput(
"characterisation")[0]
# Execute plugin which creates a simple HTML page
self.executeSimpleHTML(xsDataResultCharacterisation)
# Send failure email message (MXSUP-183):
strSubject = "%s : FAILURE!" % EDUtilsPath.getEdnaSite()
strMessage = "Interface FAILURE!"
if self.edPluginControlInterface.hasDataOutput("characterisation"):
xsDataResultCharacterisation = self.edPluginControlInterface.getDataOutput(
"characterisation")[0]
if xsDataResultCharacterisation.getStatusMessage():
strMessage += "\n\n"
strMessage += xsDataResultCharacterisation.getStatusMessage(
).getValue()
if xsDataResultCharacterisation.getShortSummary():
strMessage += "\n\n"
strMessage += xsDataResultCharacterisation.getShortSummary(
).getValue()
self.sendEmail(strSubject, strMessage)
def doSuccessActionISPyB(self, _edPlugin):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionISPyB...")
self.retrieveSuccessMessages(
self.edPluginControlISPyB,
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionISPyB")
def doFailureActionISPyB(self, _edPlugin=None):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doFailureActionISpyB...")
self.retrieveFailureMessages(
self.edPluginControlISPyB,
"EDPluginControlInterfaceToMXCuBEv1_3.doFailureActionISpyB")
# Send failure email message (MXSUP-183):
strSubject = "%s : FAILURE!" % EDUtilsPath.getEdnaSite()
strMessage = "ISPyB FAILURE!"
self.sendEmail(strSubject, strMessage)
def createDNAFileDirectoryPath(self, _xsDataResultCharacterisation):
"""
This method creates a "DNA" style directory path, i.e. in the same directory were the
images are located a new directory is created with the following convention:
dnafiles_prefix_runNumber
The path to this directory is returned if the directory was successfully created.
"""
# First extract all reference image directory paths and names
xsDataCollection = _xsDataResultCharacterisation.getDataCollection()
listImageDirectoryPath = []
listImagePrefix = []
for xsDataSubWedge in xsDataCollection.getSubWedge():
for xsDataImage in xsDataSubWedge.getImage():
strImagePath = xsDataImage.getPath().getValue()
listImageDirectoryPath.append(os.path.dirname(strImagePath))
listImagePrefix.append(EDUtilsImage.getPrefix(strImagePath))
# TODO: Check that all paths and prefixes are the same
strImageDirectory = listImageDirectoryPath[0]
strPrefix = listImagePrefix[0]
# Remove any "ref-" or "postref-" from the prefix in order to make it fully
# compatitble with DNA standards:
if (strPrefix is not None):
if (strPrefix.startswith("ref-")):
strPrefix = strPrefix[4:]
elif (strPrefix.startswith("postref-")):
strPrefix = strPrefix[8:]
strDNAFileDirectoryPath = os.path.join(strImageDirectory,
"%s_dnafiles" % strPrefix)
return strDNAFileDirectoryPath
def createPyArchDNAFilePath(self, _strDNAFileDirectoryPath):
"""
This method translates from a "visitor" path to a "pyarch" path:
/data/visitor/mx415/id14eh1/20100209 -> /data/pyarch/id14eh1/mx415/20100209
"""
strPyarchDNAFilePath = None
listOfDirectories = _strDNAFileDirectoryPath.split(os.sep)
listBeamlines = [
"bm14", "id14eh1", "id14eh2", "id14eh3", "id14eh4", "id23eh1",
"id23eh2", "id29"
]
# Check that we have at least four levels of directories:
if (len(listOfDirectories) > 4):
strDataDirectory = listOfDirectories[1]
strSecondDirectory = listOfDirectories[2]
strProposal = None
strBeamline = None
if ((strDataDirectory == "data")
and (strSecondDirectory == "visitor")):
strProposal = listOfDirectories[3]
strBeamline = listOfDirectories[4]
elif ((strDataDirectory == "data")
and (strSecondDirectory in listBeamlines)):
strBeamline = strSecondDirectory
strProposal = listOfDirectories[4]
if (strProposal != None) and (strBeamline != None):
strPyarchDNAFilePath = os.path.join(os.sep, "data")
strPyarchDNAFilePath = os.path.join(strPyarchDNAFilePath,
"pyarch")
strPyarchDNAFilePath = os.path.join(strPyarchDNAFilePath,
strBeamline)
strPyarchDNAFilePath = os.path.join(strPyarchDNAFilePath,
strProposal)
for strDirectory in listOfDirectories[5:]:
strPyarchDNAFilePath = os.path.join(
strPyarchDNAFilePath, strDirectory)
if (strPyarchDNAFilePath is None):
self.WARNING(
"EDPluginControlInterfaceToMXCuBEv1_3.createPyArchDNAFilePath: path not converted for pyarch: %s "
% _strDNAFileDirectoryPath)
return strPyarchDNAFilePath
def createDNAFileDirectory(self, _strDNAFileDirectoryPath):
"""
Create a "DNA-files" directory - if possible.
"""
bSuccess = False
if (_strDNAFileDirectoryPath is not None):
if (os.path.exists(_strDNAFileDirectoryPath)):
self.warning("Removing existing DNA files directory: %s" %
_strDNAFileDirectoryPath)
if (os.access(_strDNAFileDirectoryPath, os.W_OK)):
shutil.rmtree(_strDNAFileDirectoryPath)
else:
self.warning("Cannot remove existing DNA files directory!")
if (_strDNAFileDirectoryPath is not None):
# Check if directory one level up is writeable
strDNAFileBaseDirectory = os.path.split(
_strDNAFileDirectoryPath)[0]
if (os.access(strDNAFileBaseDirectory, os.W_OK)):
self.DEBUG("Creating DNA files directory: %s" %
_strDNAFileDirectoryPath)
os.mkdir(_strDNAFileDirectoryPath)
bSuccess = True
else:
self.warning("Cannot create DNA files directory: %s" %
_strDNAFileDirectoryPath)
return bSuccess
def splitHeadDirectory(self, _strPath):
"""
This method works like os.path.split except that it splits the head directory
from the rest of the path. Example:
"/" -> [ None, None]
"/data" -> ["data", None]
"/data/visitor" -> ["data", "visitor"]
"/data/visitor/mx415/id14eh2/20100212" -> ["data", "visitor/mx415/id14eh2/20100212"]
"""
listOfDirectories = _strPath.split(os.sep)
strTail = None
strHead = None
if (len(listOfDirectories) > 1):
strHead = listOfDirectories[1]
if (strHead == ""):
strHead = None
if (len(listOfDirectories) > 1):
for strEntry in listOfDirectories[2:]:
if (strTail is None):
strTail = strEntry
else:
strTail = os.path.join(strTail, strEntry)
return [strHead, strTail]
def createOutputFileDictionary(self,
_xsDataResultCharacterisation,
_strPathToLogFileDirectory=None):
"""
This method creates an XSDataDictionary containing the name and locations of the
characterisation output files.
"""
xsDataDictionaryLogFile = XSDataDictionary()
# Start with the prediction images
xsDataIndexingResult = _xsDataResultCharacterisation.getIndexingResult(
)
xsDataGeneratePredictionResult = xsDataIndexingResult.getPredictionResult(
)
listXSDataImagePrediction = xsDataGeneratePredictionResult.getPredictionImage(
)
for xsDataImagePrediction in listXSDataImagePrediction:
xsDataKeyValuePair = XSDataKeyValuePair()
iPredictionImageNumber = xsDataImagePrediction.getNumber(
).getValue()
xsDataStringKey = XSDataString("predictionImage_%d" %
iPredictionImageNumber)
xsDataStringValue = None
strPredictionImagePath = xsDataImagePrediction.getPath().getValue()
if (_strPathToLogFileDirectory is not None):
strPredictionImageFileName = EDUtilsFile.getBaseName(
strPredictionImagePath)
strNewPredictionImagePath = os.path.join(
_strPathToLogFileDirectory, strPredictionImageFileName)
EDUtilsFile.copyFile(strPredictionImagePath,
strNewPredictionImagePath)
xsDataStringValue = XSDataString(strNewPredictionImagePath)
else:
xsDataStringValue = XSDataString(strPredictionImageFileName)
xsDataKeyValuePair.setKey(xsDataStringKey)
xsDataKeyValuePair.setValue(xsDataStringValue)
xsDataDictionaryLogFile.addKeyValuePair(xsDataKeyValuePair)
# Best log file
strPathToBESTLogFile = None
strPathToExecutiveSummary = None
if _xsDataResultCharacterisation.getStrategyResult().getBestLogFile(
) != None:
strPathToBESTLogFile = _xsDataResultCharacterisation.getStrategyResult(
).getBestLogFile().getPath().getValue()
if strPathToBESTLogFile is not None:
xsDataStringKey = XSDataString("logFileBest")
xsDataStringValue = None
if (_strPathToLogFileDirectory is not None):
strNewBestLogPath = os.path.join(_strPathToLogFileDirectory,
"best.log")
EDUtilsFile.copyFile(strPathToBESTLogFile, strNewBestLogPath)
xsDataStringValue = XSDataString(strNewBestLogPath)
else:
xsDataStringValue = XSDataString(strPathToBESTLogFile)
xsDataKeyValuePair = XSDataKeyValuePair()
xsDataKeyValuePair.setKey(xsDataStringKey)
xsDataKeyValuePair.setValue(xsDataStringValue)
xsDataDictionaryLogFile.addKeyValuePair(xsDataKeyValuePair)
if (strPathToExecutiveSummary is not None):
xsDataStringKey = XSDataString("executiveSummary")
xsDataStringValue = None
if (_strPathToLogFileDirectory is not None):
strExecutiveSummaryFileName = EDUtilsFile.getBaseName(
strPathToExecutiveSummary)
strNewExecutiveSummaryPath = os.path.join(
_strPathToLogFileDirectory, strExecutiveSummaryFileName)
EDUtilsFile.copyFile(strPathToExecutiveSummary,
strNewExecutiveSummaryPath)
xsDataStringValue = XSDataString(strNewExecutiveSummaryPath)
# Copy also the executive summary file to "dna_log.txt"...
strNewExecutiveSummaryPath = os.path.join(
_strPathToLogFileDirectory, "dna_log.txt")
EDUtilsFile.copyFile(strPathToExecutiveSummary,
strNewExecutiveSummaryPath)
else:
xsDataStringValue = XSDataString(strPathToExecutiveSummary)
xsDataKeyValuePair = XSDataKeyValuePair()
xsDataKeyValuePair.setKey(xsDataStringKey)
xsDataKeyValuePair.setValue(xsDataStringValue)
xsDataDictionaryLogFile.addKeyValuePair(xsDataKeyValuePair)
return xsDataDictionaryLogFile
def doFailureActionCharacterisation(self, _edPlugin=None):
"""
retrieve the potential warning messages
retrieve the potential error messages
"""
self.DEBUG(
"EDPluginControlInterfacev1_3.doFailureActionCharacterisation")
self.setFailure()
# Send failure email message (MXSUP-183):
strSubject = "%s : FAILURE!" % EDUtilsPath.getEdnaSite()
strMessage = "Characterisation FAILURE!"
self.sendEmail(strSubject, strMessage)
def updateDataInputCharacterisation(self, _xsDataInputCharacterisation):
"""
This method updates the xsDataInputCharacterisation object given as argument with the following
parameters (if available) goven as input:
- Diffraction plan
- Beam size
- Beam flux
- Min exposure time per image
- Max oscillation speed
- Min oscillation width
- Sample information
"""
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.createDataInputCharacterisationFromDataSets"
)
xsDataCollection = _xsDataInputCharacterisation.getDataCollection()
if (_xsDataInputCharacterisation is not None):
xsDataInputCCP4i = self.getDataInput()
# Update with diffraction plan
xsDiffactionPlan = xsDataInputCCP4i.getDiffractionPlan()
if (xsDiffactionPlan is not None):
xsDataCollection.setDiffractionPlan(xsDiffactionPlan)
# Update the data collection subwedges with additional experimental conditions
for xsDataSubWedge in xsDataCollection.getSubWedge():
xsDataExperimentalCondition = xsDataInputCCP4i.getExperimentalCondition(
)
if (xsDataExperimentalCondition is not None):
xsDataBeam = xsDataExperimentalCondition.getBeam()
if (xsDataBeam is not None):
xsDataBeamSize = xsDataBeam.getSize()
if (xsDataBeamSize is not None):
xsDataSubWedge.getExperimentalCondition().getBeam(
).setSize(xsDataBeamSize)
xsDataBeamFlux = xsDataBeam.getFlux()
if (xsDataBeamFlux is not None):
xsDataSubWedge.getExperimentalCondition().getBeam(
).setFlux(xsDataBeamFlux)
xsDataMinExposureTime = xsDataBeam.getMinExposureTimePerImage(
)
if (xsDataMinExposureTime is not None):
xsDataSubWedge.getExperimentalCondition().getBeam(
).setMinExposureTimePerImage(xsDataMinExposureTime)
xsDataGoniostat = xsDataExperimentalCondition.getGoniostat(
)
if (xsDataGoniostat is not None):
xsDataMaxOscSpeed = xsDataGoniostat.getMaxOscillationSpeed(
)
if (xsDataMaxOscSpeed is not None):
xsDataSubWedge.getExperimentalCondition(
).getGoniostat().setMaxOscillationSpeed(
xsDataMaxOscSpeed)
xsDataMinOscWidth = xsDataGoniostat.getMinOscillationWidth(
)
if (xsDataMinOscWidth is not None):
xsDataSubWedge.getExperimentalCondition(
).getGoniostat().setMinOscillationWidth(
xsDataMinOscWidth)
# Update with the sample
xsDataSample = xsDataInputCCP4i.getSample()
if (xsDataSample is not None):
xsDataCollection.setSample(xsDataSample)
def sendEmail(self, _strSubject, _strMessage):
"""Sends an email to the EDNA contact person (if configured)."""
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: Subject = %s" %
_strSubject)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: Message:")
self.DEBUG(_strMessage)
if self.strEDNAContactEmail == None:
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: No email address configured!"
)
elif not EDUtilsPath.getEdnaSite().startswith("ESRF"):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.sendEmail: Not executed at the ESRF! EDNA_SITE=%s"
% EDUtilsPath.getEdnaSite())
else:
try:
self.DEBUG("Sending message to %s." % self.strEDNAContactEmail)
self.DEBUG("Message: %s" % _strMessage)
strMessage = """
EDNA_HOME = %s
EDNA_SITE = %s
PLUGIN_NAME = %s
working_dir = %s
%s
""" % (EDUtilsPath.getEdnaHome(), EDUtilsPath.getEdnaSite(),
self.getPluginName(), self.getWorkingDirectory(), _strMessage)
strEmailMsg = ("From: %s\r\nTo: %s\r\nSubject: %s\r\n\r\n%s" % (self.strEDNAEmailSender, \
self.strEDNAContactEmail, \
_strSubject, strMessage))
server = smtplib.SMTP("localhost")
server.sendmail(self.strEDNAEmailSender,
self.strEDNAContactEmail, strEmailMsg)
server.quit()
except:
self.ERROR("Error when sending email message!")
self.writeErrorTrace()
def executeSimpleHTML(self, _xsDataResultCharacterisation):
xsDataInputSimpleHTMLPage = XSDataInputSimpleHTMLPage()
xsDataInputSimpleHTMLPage.setCharacterisationResult(
_xsDataResultCharacterisation)
self.edPluginExecSimpleHTML.setDataInput(xsDataInputSimpleHTMLPage)
self.edPluginExecSimpleHTML.connectSUCCESS(self.doSuccessSimpleHTML)
self.edPluginExecSimpleHTML.connectFAILURE(self.doFailureSimpleHTML)
self.executePluginSynchronous(self.edPluginExecSimpleHTML)
def doSuccessSimpleHTML(self, _edPlugin=None):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessSimpleHTML...")
self.retrieveSuccessMessages(
_edPlugin,
"EDPluginControlInterfaceToMXCuBEv1_3.doSuccessSimpleHTML")
self.xsDataResultMXCuBE.setHtmlPage(
_edPlugin.getDataOutput().getPathToHTMLFile())
def doFailureSimpleHTML(self, _edPlugin=None):
self.DEBUG(
"EDPluginControlInterfaceToMXCuBEv1_3.doFailureSimpleHTML...")
class EDPluginControlInterfaceToMXCuBEv1_3(EDPluginControl):
"""
This is the plugin interface to launch the MXv1 characterisation from an MXCuBE gui.
It is for the moment a wrapper for the EDPluginControlCCP4iv1_1 plugin, which also
runs the ISPyB control plugin if a data collection id is available.
"""
EDNA_CONTACT_EMAIL = "contactEmail"
EDNA_EMAIL_SENDER = "emailSender"
def __init__ (self):
"""
Initialisation of EDPluginControlInterfaceToMXCuBEv1_3:
- Input data type class : XSDataInputMXCuBE
- Name of default characterisation plugin : EDPluginControlCharacterisationv1_1
"""
EDPluginControl.__init__(self)
self.setXSDataInputClass(XSDataInputMXCuBE)
self.strPluginControlInterface = "EDPluginControlInterfacev1_2"
self.edPluginControlInterface = None
self.strPluginControlISPyB = "EDPluginControlISPyBv1_1"
self.edPluginControlISPyB = None
self.xsDataResultMXCuBE = None
self.xsDataIntegerDataCollectionId = None
self.strPluginExecOutputHTMLName = "EDPluginExecOutputHTMLv1_0"
self.edPluginExecOutputHTML = None
self.strPluginExecSimpleHTMLName = "EDPluginExecSimpleHTMLPagev1_0"
self.edPluginExecSimpleHTML = None
self.strEDNAContactEmail = None
self.strEDNAEmailSender = "*****@*****.**"
self.tStart = None
self.tStop = None
def checkParameters(self):
"""
Checks the mandatory input parameters :
- dataSet
- outputFileDirectory
"""
self.verboseDebug("EDPluginControlInterfaceToMXCuBEv1_3.checkParameters")
self.checkMandatoryParameters(self.getDataInput(), "Data Input is None")
self.checkMandatoryParameters(self.getDataInput().getDataSet(), "dataSet")
def configure(self):
EDPluginControl.configure(self)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.configure")
xsPluginItem = self.getConfiguration()
if xsPluginItem == None:
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.configure: No plugin item defined.")
else:
self.strEDNAContactEmail = EDConfiguration.getStringParamValue(xsPluginItem, EDPluginControlInterfaceToMXCuBEv1_3.EDNA_CONTACT_EMAIL)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.configure: EDNAContactEmail = %s" % self.strEDNAContactEmail)
strEDNAEmailSender = EDConfiguration.getStringParamValue(xsPluginItem, self.EDNA_EMAIL_SENDER)
if strEDNAEmailSender:
self.strEDNAEmailSender = strEDNAEmailSender
def preProcess(self, _edPlugin=None):
"""
This method prepares the input for the CCP4i plugin and loads it.
"""
EDPluginControl.preProcess(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.preProcess...")
self.tStart = time.time()
xsDataInputMXCuBE = self.getDataInput()
self.edPluginControlInterface = self.loadPlugin(self.strPluginControlInterface)
for xsDataSetMXCuBE in xsDataInputMXCuBE.getDataSet():
for xsDataFile in xsDataSetMXCuBE.getImageFile():
strPath = xsDataFile.getPath().getValue()
self.edPluginControlInterface.setDataInput(XSDataString(strPath), "imagePaths")
if xsDataInputMXCuBE.getExperimentalCondition() != None:
self.edPluginControlInterface.setDataInput(str(xsDataInputMXCuBE.getExperimentalCondition().marshal()), "experimentalCondition")
if xsDataInputMXCuBE.getDiffractionPlan() != None:
self.edPluginControlInterface.setDataInput(str(xsDataInputMXCuBE.getDiffractionPlan().marshal()), "diffractionPlan")
if xsDataInputMXCuBE.getSample() != None:
self.edPluginControlInterface.setDataInput(xsDataInputMXCuBE.getSample().marshal(), "sample")
if xsDataInputMXCuBE.getDataCollectionId() != None:
self.edPluginControlInterface.setDataInput(xsDataInputMXCuBE.getDataCollectionId().marshal(), "dataCollectionId")
self.edPluginExecOutputHTML = self.loadPlugin(self.strPluginExecOutputHTMLName, "OutputHTML")
self.edPluginExecSimpleHTML = self.loadPlugin(self.strPluginExecSimpleHTMLName, "SimpleHTML")
self.xsDataResultMXCuBE = XSDataResultMXCuBE()
def process(self, _edPlugin=None):
EDPluginControl.process(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.process...")
if self.edPluginControlInterface is not None:
self.connectProcess(self.edPluginControlInterface.executeSynchronous)
self.edPluginControlInterface.connectSUCCESS(self.doSuccessActionInterface)
self.edPluginControlInterface.connectFAILURE(self.doFailureActionInterface)
def finallyProcess(self, _edPlugin=None):
EDPluginControl.finallyProcess(self, _edPlugin)
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.postProcess...")
self.setDataOutput(self.xsDataResultMXCuBE)
def doSuccessActionInterface(self, _edPlugin=None):
self.DEBUG("EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionInterface...")
self.retrieveSuccessMessages(self.edPluginControlInterface, "EDPluginControlInterfaceToMXCuBEv1_3.doSuccessActionInterface")
if self.edPluginControlInterface.hasDataOutput("characterisation"):
xsDataResultCharacterisation = self.edPluginControlInterface.getDataOutput("characterisation")[0]
self.xsDataResultMXCuBE.setCharacterisationResult(xsDataResultCharacterisation)
strPathCharacterisationResult = os.path.join(self.getWorkingDirectory(), "CharacterisationResult.xml")
xsDataResultCharacterisation.outputFile(strPathCharacterisationResult)
self.xsDataResultMXCuBE.setListOfOutputFiles(XSDataString(strPathCharacterisationResult))
# For the moment, create "DNA" style output directory
strPathToDNAFileDirectory = self.createDNAFileDirectoryPath(xsDataResultCharacterisation)
xsDataDictionaryLogFile = None
if (self.createDNAFileDirectory(strPathToDNAFileDirectory)):
xsDataDictionaryLogFile = self.createOutputFileDictionary(xsDataResultCharacterisation, strPathToDNAFileDirectory)
strPyArchPathToDNAFileDirectory = self.createPyArchDNAFilePath(strPathToDNAFileDirectory)
if (self.createDNAFileDirectory(strPyArchPathToDNAFileDirectory)):
xsDataDictionaryLogFile = self.createOutputFileDictionary(xsDataResultCharacterisation, strPyArchPathToDNAFileDirectory)
self.xsDataResultMXCuBE.setOutputFileDictionary(xsDataDictionaryLogFile)
# Send success email message (MXSUP-183):
self.tStop = time.time()
strSubject = "%s : SUCCESS! (%.1f s)" % (EDUtilsPath.getEdnaSite(), self.tStop-self.tStart)
strMessage = "Characterisation success!"
if xsDataResultCharacterisation.getStatusMessage():
strMessage += "\n\n"
strMessage += xsDataResultCharacterisation.getStatusMessage().getValue()
if xsDataResultCharacterisation.getShortSummary():
strMessage += "\n\n"
strMessage += xsDataResultCharacterisation.getShortSummary().getValue()
self.sendEmail(strSubject, strMessage)
# Fix for bug EDNA-55 : If burning strategy EDNA2html shouldn't be run
bRunExecOutputHTML = True
xsDataInputMXCuBE = self.getDataInput()
xsDataDiffractionPlan = xsDataInputMXCuBE.getDiffractionPlan()
if xsDataDiffractionPlan.getStrategyOption() is not None:
strStrategyOption = xsDataDiffractionPlan.getStrategyOption().getValue()
if strStrategyOption.find("-DamPar") != -1:
bRunExecOutputHTML = False
if (self.edPluginExecOutputHTML is not None) and bRunExecOutputHTML:
self.edPluginExecOutputHTML.executeSynchronous()
if not self.edPluginExecOutputHTML.isFailure() and self.edPluginExecOutputHTML.hasDataOutput("htmlFile"):
strPathToHTMLFile = self.edPluginExecOutputHTML.getDataOutput("htmlFile")[0].getPath().getValue()
strPathToHTMLDir = self.edPluginExecOutputHTML.getDataOutput("htmlDir")[0].getPath().getValue()
strPathToDNAIndexDirectory = os.path.join(strPathToDNAFileDirectory, "index")
if os.path.exists(strPathToHTMLFile):
try:
os.mkdir(strPathToDNAIndexDirectory)
shutil.copy(strPathToHTMLFile, os.path.join(strPathToDNAIndexDirectory, "index.html"))
shutil.copytree(strPathToHTMLDir, os.path.join(strPathToDNAIndexDirectory, os.path.basename(strPathToHTMLDir)))
if strPyArchPathToDNAFileDirectory is not None:
strPathToPyArchIndexDirectory = os.path.join(strPyArchPathToDNAFileDirectory, "index")
os.mkdir(strPathToPyArchIndexDirectory)
shutil.copy(strPathToHTMLFile, os.path.join(strPathToPyArchIndexDirectory, "index.html"))
shutil.copytree(strPathToHTMLDir, os.path.join(strPathToPyArchIndexDirectory, os.path.basename(strPathToHTMLDir)))
except Exception, e:
self.DEBUG("Exception caught: %r" % e)
# Fix for bug MXSUP-251: Put the BEST .par file in the EDNA characterisation root directory
xsDataIntegrationResult = xsDataResultCharacterisation.getIntegrationResult()
if xsDataIntegrationResult:
listXSDataIntegrationSubWedgeResult = xsDataIntegrationResult.getIntegrationSubWedgeResult()
if listXSDataIntegrationSubWedgeResult:
if listXSDataIntegrationSubWedgeResult != []:
strBestfilePar = listXSDataIntegrationSubWedgeResult[0].getBestfilePar().getValue()
# Put the file one directory above the mxCuBE v1.3 plugin working directory:
strDir = os.path.dirname(self.getWorkingDirectory())
strPath = os.path.join(strDir, "bestfile.par")
EDUtilsFile.writeFile(strPath, strBestfilePar)
# Execute plugin which creates a simple HTML page
self.executeSimpleHTML(xsDataResultCharacterisation)
