def TEST_purge_Folder():
# Set up exit and config classes for unit testing
#_Config.iDebug = _Config.icLevels.AllDebug # All Debug during testing or debugging
_Config.iDebug = _Config.icLevels.Success # Success when the test is ready
_Config.caColors.Mute() # Tone down error and other console colors
sTestName = "TEST_purge_Folder"
_Log.dPrint(_Config.icLevels.SomeDebug, sTestName + " Started...")
# Blank case
_Exit.reset()
_wpScan.purge_Folder("")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "blank")
# Too short (try to avoid testing root folder case)
_Exit.reset()
_wpScan.purge_Folder("slash")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "slash")
# Long and exists but invalid
sLongButInvalid = "012345678901234567890123456789"
if not os.path.exists(sLongButInvalid):
os.mkdir(sLongButInvalid)
_Exit.reset()
_wpScan.purge_Folder(sLongButInvalid)
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "long but invalid")
os.rmdir(sLongButInvalid)
# Valid and exists (and make sure it's actually gone)
sValid = "Evidence_2016-10-12_08-24-56"
if not os.path.exists(sValid):
os.mkdir(sValid)
if not os.path.exists(os.path.join(sValid, "a")):
os.mkdir(os.path.join(sValid, "a"))
if not os.path.exists(os.path.join(sValid, "b")):
os.mkdir(os.path.join(sValid, "b"))
file = open(os.path.join(sValid,"dfile.txt"), 'w')
file.write("#delete me")
file.close()
file = open(os.path.join(os.path.join(sValid, "a"),"cfile.txt"), 'w')
file.write("#delete me")
file.close()
_Exit.reset()
_wpScan.purge_Folder(sValid)
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "valid - return code")
_Exit.DieIfTrue(os.path.exists(sValid), sTestName, "valid - failed to purge")
# Valid but does not exist (this is OK)
_Exit.reset()
_wpScan.purge_Folder(sValid)
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "valid but does not exist - return code")
_Config.caColors.Unmute()
_Log.dPrint(_Config.icLevels.Success, sTestName + " Tested OK!")
return
def TEST_validate_Existing_Evidence_Folder():
# Set up exit and config classes for unit testing
#_Config.iDebug = _Config.icLevels.AllDebug # All Debug during testing or debugging
_Config.iDebug = _Config.icLevels.Success # Success when the test is ready
_Exit.ExitOnExit = False
_Config.caColors.Mute() # Tone down error and other console colors
sTestName = "TEST_validate_Existing_Evidence_Folder"
_Log.dPrint(_Config.icLevels.SomeDebug, sTestName + " Started...")
_Exit.reset()
sTest = _wpScan.validate_Existing_Evidence_Folder("")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "blank")
_Exit.reset()
sTest = _wpScan.validate_Existing_Evidence_Folder("thisfolderdoesnotexist")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "not there")
sFolder = sTestName + "_TestFolder"
if not os.path.exists(sFolder):
os.mkdir(sFolder)
_Exit.reset()
sTest = _wpScan.validate_Existing_Evidence_Folder(sFolder)
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "valid")
os.rmdir(sFolder)
_Config.caColors.Unmute()
_Log.dPrint(_Config.icLevels.Success, sTestName + " Tested OK!")
def TEST_parse_Input_File_Into_Array():
# Set up exit and config classes for unit testing
#_Config.iDebug = _Config.icLevels.AllDebug # All Debug during testing or debugging
_Config.iDebug = _Config.icLevels.Success # Success when the test is ready
_Exit.ExitOnExit = False
_Config.caColors.Mute() # Tone down error and other console colors
sTestName = "TEST_parse_Input_File_Into_Array"
_Log.dPrint(_Config.icLevels.SomeDebug, sTestName + " Started...")
# Test a good but empty file
_Exit.reset()
sRealFile = sTestName + '.deleteme'
file = open(sRealFile, 'w')
file.write("#delete me")
file.close()
saArr = _wpScan.parse_Input_File_Into_Array(sRealFile)
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "good but empty file")
_Exit.DieIfNoMatch(len(saArr), 0, sTestName, "good but empty file")
os.remove(sRealFile)
# Test a good file with 12 lines: 3 blank, 4 comments, 5 URLs
_Exit.reset()
sRealFile = sTestName + '.deleteme'
file = open(sRealFile, 'w')
file.write(" \n") # Tabs
file.write("# I am a comment\n")
file.write("# I am a comment\n")
file.write("https:\\\\a.url.com\\1\n")
file.write("https:\\\\a.url.com\\2 \n")
file.write("# I am a comment\n")
file.write(" https:\\\\a.url.com\\3\n")
file.write(" https:\\\\a.url.com\\4 \n")
file.write("# I am a comment\n")
file.write(" https:\\\\a.url.com\\5 \n") # Tabs
file.write(" \n")
file.write("\n")
file.close()
saArr = _wpScan.parse_Input_File_Into_Array(sRealFile)
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "good file")
_Exit.DieIfNoMatch(len(saArr), 5, sTestName, "good file")
os.remove(sRealFile)
_Config.caColors.Unmute()
_Log.dPrint(_Config.icLevels.Success, sTestName + " Tested OK!")
def TEST_validate_Output_File():
# Set up exit and config classes for unit testing
#_Config.iDebug = _Config.icLevels.AllDebug # All Debug during testing or debugging
_Config.iDebug = _Config.icLevels.Success # Success when the test is ready
_Config.caColors.Mute() # Tone down error and other console colors
sTestName = "TEST_validate_Output_File"
_Log.dPrint(_Config.icLevels.SomeDebug, sTestName + " Started...")
# Test for blank files
_Exit.reset()
_wpScan.validate_Output_File("", "Test")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "blank file 1")
_Exit.reset()
_wpScan.validate_Output_File(" ", "Test")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "blank file 2") # Single space
_Exit.reset()
_wpScan.validate_Output_File(" ", "Test")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "blank file 3") # Tabs
# Test for 'None'
_Exit.reset()
_wpScan.validate_Output_File("None", "Test")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "None file")
# Test a missing but valid file
_Exit.reset()
_wpScan.validate_Output_File("notthere.does.not.exist", "Test")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "missing file")
# Test a good file
sRealFile = '__unittest_wordpress-scan_validate_Output_File.deleteme'
file = open(sRealFile, 'w')
file.write("delete me")
file.close()
_Exit.reset()
_wpScan.validate_Output_File(sRealFile, "Test")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "existing file")
os.remove(sRealFile)
_Config.caColors.Unmute()
_Log.dPrint(_Config.icLevels.Success, sTestName + " Tested OK!")
def TEST_validate_And_Normalize_DateTime():
# Set up exit and config classes for unit testing
#_Config.iDebug = _Config.icLevels.AllDebug # All Debug during testing or debugging
_Config.iDebug = _Config.icLevels.Success # Success when the test is ready
_Exit.ExitOnExit = False
_Config.caColors.Mute() # Tone down error and other console colors
sTestName = "TEST_validate_And_Normalize_DateTime"
_Log.dPrint(_Config.icLevels.SomeDebug, sTestName + " Started...")
# Test blank
_Exit.reset()
sTest = _wpScan.validate_And_Normalize_DateTime("")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "blank")
# Test incomplete
_Exit.reset()
sTest = _wpScan.validate_And_Normalize_DateTime("201-1-2 4:2:3")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "incomplete")
# Test invalid
_Exit.reset()
sTest = _wpScan.validate_And_Normalize_DateTime("201X-15-14 10-12-32")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "invalid")
# Test valid
_Exit.reset()
sTest = _wpScan.validate_And_Normalize_DateTime("2016-10-12_23-59-59")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "valid 1 - exit code")
_Exit.DieIfNoMatch(sTest, "2016-10-12_23-59-59", sTestName, "valid 1 - value")
_Exit.reset()
sTest = _wpScan.validate_And_Normalize_DateTime("2016:10:12 23:59:59")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "valid 2 - exit code")
_Exit.DieIfNoMatch(sTest, "2016-10-12_23-59-59", sTestName, "valid 2 - value")
_Config.caColors.Unmute()
_Log.dPrint(_Config.icLevels.Success, sTestName + " Tested OK!")
def TEST_validate_Input_File():
# Set up exit and config classes for unit testing
#_Config.iDebug = _Config.icLevels.AllDebug # All Debug during testing or debugging
_Config.iDebug = _Config.icLevels.Success # Success when the test is ready
_Exit.ExitOnExit = False
_Config.caColors.Mute() # Tone down error and other console colors
sTestName = "TEST_validate_Input_File"
_Log.dPrint(_Config.icLevels.SomeDebug, sTestName + " Started...")
# Test for blank file
_Exit.reset()
_wpScan.validate_Input_File("")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "blank file")
# Test the reset function
_Exit.reset()
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "reset()")
# Test a bad file
_Exit.reset()
_wpScan.validate_Input_File("notthere.does.not.exist")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "bad file")
# Test a good file
_Exit.reset()
sRealFile = '__unittest_wordpress-scan_validate_Input_File.deleteme'
file = open(sRealFile, 'w')
file.write("delete me")
file.close()
_wpScan.validate_Input_File(sRealFile)
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "good file")
os.remove(sRealFile)
_Config.caColors.Unmute()
_Log.dPrint(_Config.icLevels.Success, sTestName + " Tested OK!")
def TEST_create_Folder():
# Set up exit and config classes for unit testing
#_Config.iDebug = _Config.icLevels.AllDebug # All Debug during testing or debugging
_Config.iDebug = _Config.icLevels.Success # Success when the test is ready
_Config.caColors.Mute() # Tone down error and other console colors
sTestName = "TEST_create_Folder"
_Log.dPrint(_Config.icLevels.SomeDebug, sTestName + " Started...")
# Empty folder should die
_Exit.reset()
_wpScan.create_Folder("")
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsError(), sTestName, "empty path")
sRootNew = sTestName + "_ROOTNEW"
sRootExisting = sTestName + "_ROOTEXISTING"
sSubfolderNew = sTestName + "_SUBNEW"
sSubfolderExisting = sTestName + "_SUBEXISTING"
# Create some folders and check on others
if not os.path.exists(sRootExisting):
os.mkdir(sRootExisting)
if not os.path.exists(os.path.join(sRootExisting, sSubfolderExisting)):
os.mkdir(os.path.join(sRootExisting, sSubfolderExisting))
_Exit.DieIfTrue(os.path.exists(sRootNew), sTestName, "Root folder " + sRootNew + " already exists - please delete manually!")
_Exit.DieIfTrue(os.path.exists(os.path.join(sRootExisting, sSubfolderNew)), sTestName, "Subfolder folder " + os.path.join(sRootExisting, sSubfolderNew) + " already exists - please delete manually!")
# Folder that does not exist
_Exit.reset()
_wpScan.create_Folder(sRootNew)
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "Folder that does not exist - exited app")
_Exit.DieIfNotTrue(os.path.exists(sRootNew), sTestName, "Folder that does not exist - failed to create")
# Folder that does exist
_Exit.reset()
_wpScan.create_Folder(sRootExisting)
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "Folder that does exist - exited app")
_Exit.DieIfNotTrue(os.path.exists(sRootExisting), sTestName, "Folder that does exist - failed to create")
# Subfolder that does not exist
_Exit.reset()
_wpScan.create_Folder(os.path.join(sRootExisting, sSubfolderNew))
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "Subfolder that does not exist - exited app")
_Exit.DieIfNotTrue(os.path.exists(os.path.join(sRootExisting, sSubfolderNew)), sTestName, "Subfolder that does not exist - failed to create")
# Subfolder that does exist
_Exit.reset()
_wpScan.create_Folder(os.path.join(sRootExisting, sSubfolderExisting))
_Exit.DieIfNotTrue(_Exit.LastExitCode_IsNotSet(), sTestName, "Subfolder that does exist - exited app")
_Exit.DieIfNotTrue(os.path.exists(os.path.join(sRootExisting, sSubfolderExisting)), sTestName, "Subfolder that does exist - failed to create")
# Clean up
os.rmdir(os.path.join(sRootExisting, sSubfolderExisting))
os.rmdir(os.path.join(sRootExisting, sSubfolderNew))
os.rmdir(sRootExisting)
os.rmdir(sRootNew)
_Config.caColors.Unmute()
_Log.dPrint(_Config.icLevels.Success, sTestName + " Tested OK!")
return