def update_name(self):
tasklet = self.tasklet_weakref()
if tasklet:
try:
name = tasklet.name
except AttributeError:
if tasklet.is_main:
name = 'MainTasklet'
else:
name = 'Tasklet-%s' % (self._tasklet_id,)
thread_id = tasklet.thread_id
for thread in threading.enumerate():
if thread.ident == thread_id:
if thread.name:
thread_name = "of %s" % (thread.name,)
else:
thread_name = "of Thread-%s" % (thread.name or str(thread_id),)
break
else:
# should not happen.
thread_name = "of Thread-%s" % (str(thread_id),)
thread = None
tid = id(tasklet)
tasklet = None
else:
name = 'Tasklet-%s' % (self._tasklet_id,)
thread_name = ""
tid = '-'
self.tasklet_name = '%s %s (%s)' % (name, thread_name, tid)
def settrace_while_running_if_frame_eval(py_db, trace_func):
if not py_db.ready_to_run:
# do it if only debug session is started
return
if py_db.frame_eval_func is None:
return
threads = threading.enumerate()
try:
for t in threads:
if getattr(t, 'is_pydev_daemon_thread', False):
continue
additional_info = None
try:
additional_info = t.additional_info
except AttributeError:
pass # that's ok, no info currently set
if additional_info is None:
continue
for frame in additional_info.iter_frames(t):
py_db.set_trace_for_frame_and_parents(
frame, overwrite_prev_trace=True, dispatch_func=trace_func)
py_db.enable_cache_frames_without_breaks(False)
# sometimes (when script enters new frames too fast), we can't enable tracing only in the appropriate
# frame. So, if breakpoint was added during run, we should disable frame evaluation forever.
py_db.do_not_use_frame_eval = True
except:
traceback.print_exc()
def settrace_while_running_if_frame_eval(py_db, trace_func):
if not py_db.ready_to_run:
# do it if only debug session is started
return
if py_db.frame_eval_func is None:
return
threads = threading.enumerate()
try:
for t in threads:
if getattr(t, 'is_pydev_daemon_thread', False):
continue
additional_info = None
try:
additional_info = t.additional_info
except AttributeError:
pass # that's ok, no info currently set
if additional_info is None:
continue
for frame in additional_info.iter_frames(t):
py_db.set_trace_for_frame_and_parents(frame, overwrite_prev_trace=True, dispatch_func=trace_func)
py_db.enable_cache_frames_without_breaks(False)
# sometimes (when script enters new frames too fast), we can't enable tracing only in the appropriate
# frame. So, if breakpoint was added during run, we should disable frame evaluation forever.
py_db.do_not_use_frame_eval = True
except:
traceback.print_exc()
def update_name(self):
tasklet = self.tasklet_weakref()
if tasklet:
try:
name = tasklet.name
except AttributeError:
if tasklet.is_main:
name = 'MainTasklet'
else:
name = 'Tasklet-%s' % (self._tasklet_id, )
thread_id = tasklet.thread_id
for thread in threading.enumerate():
if thread.ident == thread_id:
if thread.name:
thread_name = "of %s" % (thread.name, )
else:
thread_name = "of Thread-%s" % (thread.name or
str(thread_id), )
break
else:
# should not happen.
thread_name = "of Thread-%s" % (str(thread_id), )
thread = None
tid = id(tasklet)
tasklet = None
else:
name = 'Tasklet-%s' % (self._tasklet_id, )
thread_name = ""
tid = '-'
self.tasklet_name = '%s %s (%s)' % (name, thread_name, tid)
def dump_threads(stream=None, show_pydevd_threads=True):
'''
Helper to dump thread info.
'''
if stream is None:
stream = sys.stderr
thread_id_to_name_and_is_pydevd_thread = {}
try:
for t in threading.enumerate():
is_pydevd_thread = getattr(t, 'is_pydev_daemon_thread', False)
thread_id_to_name_and_is_pydevd_thread[t.ident] = (
'%s (daemon: %s, pydevd thread: %s)' %
(t.name, t.daemon, is_pydevd_thread), is_pydevd_thread)
except:
pass
stream.write(
'===============================================================================\n'
)
stream.write('Threads running\n')
stream.write(
'================================= Thread Dump =================================\n'
)
stream.flush()
for thread_id, frame in _tid_to_frame_for_dump_threads().items():
name, is_pydevd_thread = thread_id_to_name_and_is_pydevd_thread.get(
thread_id, (thread_id, False))
if not show_pydevd_threads and is_pydevd_thread:
continue
stream.write(
'\n-------------------------------------------------------------------------------\n'
)
stream.write(" Thread %s" % (name, ))
stream.write('\n\n')
for i, (filename, lineno, name,
line) in enumerate(traceback.extract_stack(frame)):
stream.write(' File "%s", line %d, in %s\n' %
(filename, lineno, name))
if line:
stream.write(" %s\n" % (line.strip()))
if i == 0 and 'self' in frame.f_locals:
stream.write(' self: ')
try:
stream.write(str(frame.f_locals['self']))
except:
stream.write('Unable to get str of: %s' %
(type(frame.f_locals['self']), ))
stream.write('\n')
stream.flush()
stream.write(
'\n=============================== END Thread Dump ==============================='
)
stream.flush()
def get_main_thread():
if hasattr(threading, 'main_thread'):
return threading.main_thread()
else:
for t in threading.enumerate():
if isinstance(t, threading._MainThread):
return t
return None
def get_main_thread():
if hasattr(threading, 'main_thread'):
return threading.main_thread()
else:
for t in threading.enumerate():
if isinstance(t, threading._MainThread):
return t
return None
def dump_threads(stream=None):
'''
Helper to dump thread info.
'''
if stream is None:
stream = sys.stderr
thread_id_to_name = {}
try:
for t in threading.enumerate():
thread_id_to_name[
t.ident] = '%s (daemon: %s, pydevd thread: %s)' % (
t.name, t.daemon,
getattr(t, 'is_pydev_daemon_thread', False))
except:
pass
from _pydevd_bundle.pydevd_additional_thread_info_regular import _current_frames
stream.write(
'===============================================================================\n'
)
stream.write('Threads running\n')
stream.write(
'================================= Thread Dump =================================\n'
)
stream.flush()
for thread_id, stack in _current_frames().items():
stream.write(
'\n-------------------------------------------------------------------------------\n'
)
stream.write(" Thread %s" %
thread_id_to_name.get(thread_id, thread_id))
stream.write('\n\n')
for i, (filename, lineno, name,
line) in enumerate(traceback.extract_stack(stack)):
stream.write(' File "%s", line %d, in %s\n' %
(filename, lineno, name))
if line:
stream.write(" %s\n" % (line.strip()))
if i == 0 and 'self' in stack.f_locals:
stream.write(' self: ')
try:
stream.write(str(stack.f_locals['self']))
except:
stream.write('Unable to get str of: %s' %
(type(stack.f_locals['self']), ))
stream.write('\n')
stream.flush()
stream.write(
'\n=============================== END Thread Dump ==============================='
)
stream.flush()
def pydevd_find_thread_by_id(thread_id):
try:
threads = threading.enumerate()
for i in threads:
tid = get_thread_id(i)
if thread_id == tid or thread_id.endswith('|' + tid):
return i
# This can happen when a request comes for a thread which was previously removed.
pydev_log.info("Could not find thread %s.", thread_id)
pydev_log.info("Available: %s.",
([get_thread_id(t) for t in threads], ))
except:
pydev_log.exception()
return None
def pydevd_find_thread_by_id(thread_id):
try:
# there was a deadlock here when I did not remove the tracing function when thread was dead
threads = threading.enumerate()
for i in threads:
tid = get_thread_id(i)
if thread_id == tid or thread_id.endswith('|' + tid):
return i
# This can happen when a request comes for a thread which was previously removed.
pydevd_log(1, "Could not find thread %s\n" % (thread_id,))
pydevd_log(1, "Available: %s\n" % ([get_thread_id(t) for t in threads],))
except:
traceback.print_exc()
return None
def update_name(self):
tasklet = self.tasklet_weakref()
if tasklet:
if tasklet.blocked:
state = 'blocked'
elif tasklet.paused:
state = 'paused'
elif tasklet.scheduled:
state = 'scheduled'
else:
state = '<UNEXPECTED>'
try:
name = tasklet.name
except AttributeError:
if tasklet.is_main:
name = 'MainTasklet'
else:
name = 'Tasklet-%s' % (self._tasklet_id, )
thread_id = tasklet.thread_id
if thread_id != -1:
for thread in threading.enumerate():
if thread.ident == thread_id:
if thread.name:
thread_name = "of %s" % (thread.name, )
else:
thread_name = "of Thread-%s" % (thread.name or
str(thread_id), )
break
else:
# should not happen.
thread_name = "of Thread-%s" % (str(thread_id), )
thread = None
else:
# tasklet is no longer bound to a thread, because its thread ended
thread_name = "without thread"
tid = id(tasklet)
tasklet = None
else:
state = 'dead'
name = 'Tasklet-%s' % (self._tasklet_id, )
thread_name = ""
tid = '-'
self.tasklet_name = '%s %s %s (%s)' % (state, name, thread_name, tid)
def update_name(self):
tasklet = self.tasklet_weakref()
if tasklet:
if tasklet.blocked:
state = 'blocked'
elif tasklet.paused:
state = 'paused'
elif tasklet.scheduled:
state = 'scheduled'
else:
state = '<UNEXPECTED>'
try:
name = tasklet.name
except AttributeError:
if tasklet.is_main:
name = 'MainTasklet'
else:
name = 'Tasklet-%s' % (self._tasklet_id,)
thread_id = tasklet.thread_id
if thread_id != -1:
for thread in threading.enumerate():
if thread.ident == thread_id:
if thread.name:
thread_name = "of %s" % (thread.name,)
else:
thread_name = "of Thread-%s" % (thread.name or str(thread_id),)
break
else:
# should not happen.
thread_name = "of Thread-%s" % (str(thread_id),)
thread = None
else:
# tasklet is no longer bound to a thread, because its thread ended
thread_name = "without thread"
tid = id(tasklet)
tasklet = None
else:
state = 'dead'
name = 'Tasklet-%s' % (self._tasklet_id,)
thread_name = ""
tid = '-'
self.tasklet_name = '%s %s %s (%s)' % (state, name, thread_name, tid)
def dump_threads(stream=None):
'''
Helper to dump thread info.
'''
if stream is None:
stream = sys.stderr
thread_id_to_name = {}
try:
for t in threading.enumerate():
thread_id_to_name[t.ident] = '%s (daemon: %s, pydevd thread: %s)' % (
t.name, t.daemon, getattr(t, 'is_pydev_daemon_thread', False))
except:
pass
from _pydevd_bundle.pydevd_additional_thread_info_regular import _current_frames
stream.write('===============================================================================\n')
stream.write('Threads running\n')
stream.write('================================= Thread Dump =================================\n')
stream.flush()
for thread_id, stack in _current_frames().items():
stream.write('\n-------------------------------------------------------------------------------\n')
stream.write(" Thread %s" % thread_id_to_name.get(thread_id, thread_id))
stream.write('\n\n')
for i, (filename, lineno, name, line) in enumerate(traceback.extract_stack(stack)):
stream.write(' File "%s", line %d, in %s\n' % (filename, lineno, name))
if line:
stream.write(" %s\n" % (line.strip()))
if i == 0 and 'self' in stack.f_locals:
stream.write(' self: ')
try:
stream.write(str(stack.f_locals['self']))
except:
stream.write('Unable to get str of: %s' % (type(stack.f_locals['self']),))
stream.write('\n')
stream.flush()
stream.write('\n=============================== END Thread Dump ===============================')
stream.flush()
def get_non_pydevd_threads():
threads = threading.enumerate()
return [
t for t in threads
if t and not getattr(t, 'is_pydev_daemon_thread', False)
]
def set_trace_to_threads(tracing_func):
lib = load_python_helper_lib()
if lib is None: # This is the case if it's not CPython.
pydev_log.info(
'Unable to load helper lib to set tracing to all threads (unsupported python vm).'
)
return -1
pydev_log.info(
'Successfully Loaded helper lib to set tracing to all threads.')
ret = 0
set_trace_func = TracingFunctionHolder._original_tracing or sys.settrace
# Note: use sys._current_frames() keys to get the thread ids because it'll return
# thread ids created in C/C++ where there's user code running, unlike the APIs
# from the threading module which see only threads created through it (unless
# a call for threading.current_thread() was previously done in that thread,
# in which case a dummy thread would've been created for it).
thread_idents = set(sys._current_frames().keys())
thread_idents = thread_idents.difference(
# Ignore pydevd threads.
set(t.ident for t in threading.enumerate()
if getattr(t, 'pydev_do_not_trace', False)))
curr_ident = thread.get_ident()
curr_thread = threading._active.get(curr_ident)
for thread_ident in thread_idents:
# If that thread is not available in the threading module we also need to create a
# dummy thread for it (otherwise it'll be invisible to the debugger).
if thread_ident not in threading._active:
class _DummyThread(threading._DummyThread):
def _set_ident(self):
# Note: Hack to set the thread ident that we want.
if IS_PY2:
self._Thread__ident = thread_ident
else:
self._ident = thread_ident
t = _DummyThread()
# Reset to the base class (don't expose our own version of the class).
t.__class__ = threading._DummyThread
with threading._active_limbo_lock:
# On Py2 it'll put in active getting the current indent, not using the
# ident that was set, so, we have to update it (should be harmless on Py3
# so, do it always).
threading._active[thread_ident] = t
threading._active[curr_ident] = curr_thread
if t.ident != thread_ident:
# Check if it actually worked.
pydev_log.critical(
'pydevd: creation of _DummyThread with fixed thread ident did not succeed.'
)
# Some (ptvsd) tests failed because of this, so, leave it always disabled for now.
# show_debug_info = 1 if DebugInfoHolder.DEBUG_TRACE_LEVEL >= 1 else 0
show_debug_info = 0
# Hack to increase _Py_TracingPossible.
# See comments on py_custom_pyeval_settrace.hpp
proceed = thread.allocate_lock()
proceed.acquire()
def dummy_trace(frame, event, arg):
return dummy_trace
def increase_tracing_count():
SetTrace(dummy_trace)
proceed.release()
start_new_thread = pydev_monkey.get_original_start_new_thread(thread)
start_new_thread(increase_tracing_count, ())
proceed.acquire() # Only proceed after the release() is done.
proceed = None
result = lib.AttachDebuggerTracing(
ctypes.c_int(show_debug_info),
ctypes.py_object(set_trace_func),
ctypes.py_object(tracing_func),
ctypes.c_uint(thread_ident),
ctypes.py_object(None),
)
if result != 0:
pydev_log.info(
'Unable to set tracing for existing thread. Result: %s',
result)
ret = result
return ret
def set_trace_to_threads(tracing_func,
thread_idents=None,
create_dummy_thread=True):
assert tracing_func is not None
ret = 0
# Note: use sys._current_frames() keys to get the thread ids because it'll return
# thread ids created in C/C++ where there's user code running, unlike the APIs
# from the threading module which see only threads created through it (unless
# a call for threading.current_thread() was previously done in that thread,
# in which case a dummy thread would've been created for it).
if thread_idents is None:
thread_idents = set(sys._current_frames().keys())
for t in threading.enumerate():
# PY-44778: ignore pydevd threads and also add any thread that wasn't found on
# sys._current_frames() as some existing threads may not appear in
# sys._current_frames() but may be available through the `threading` module.
if getattr(t, 'pydev_do_not_trace', False):
thread_idents.discard(t.ident)
else:
thread_idents.add(t.ident)
curr_ident = thread.get_ident()
curr_thread = threading._active.get(curr_ident)
if curr_ident in thread_idents and len(thread_idents) != 1:
# The current thread must be updated first (because we need to set
# the reference to `curr_thread`).
thread_idents = list(thread_idents)
thread_idents.remove(curr_ident)
thread_idents.insert(0, curr_ident)
for thread_ident in thread_idents:
# If that thread is not available in the threading module we also need to create a
# dummy thread for it (otherwise it'll be invisible to the debugger).
if create_dummy_thread:
if thread_ident not in threading._active:
class _DummyThread(threading._DummyThread):
def _set_ident(self):
# Note: Hack to set the thread ident that we want.
if IS_PY2:
self._Thread__ident = thread_ident
else:
self._ident = thread_ident
t = _DummyThread()
# Reset to the base class (don't expose our own version of the class).
t.__class__ = threading._DummyThread
if thread_ident == curr_ident:
curr_thread = t
with threading._active_limbo_lock:
# On Py2 it'll put in active getting the current indent, not using the
# ident that was set, so, we have to update it (should be harmless on Py3
# so, do it always).
threading._active[thread_ident] = t
threading._active[curr_ident] = curr_thread
if t.ident != thread_ident:
# Check if it actually worked.
pydev_log.critical(
'pydevd: creation of _DummyThread with fixed thread ident did not succeed.'
)
# Some (ptvsd) tests failed because of this, so, leave it always disabled for now.
# show_debug_info = 1 if DebugInfoHolder.DEBUG_TRACE_LEVEL >= 1 else 0
show_debug_info = 0
# Hack to increase _Py_TracingPossible.
# See comments on py_custom_pyeval_settrace.hpp
proceed = thread.allocate_lock()
proceed.acquire()
def dummy_trace(frame, event, arg):
return dummy_trace
def increase_tracing_count():
set_trace = TracingFunctionHolder._original_tracing or sys.settrace
set_trace(dummy_trace)
proceed.release()
start_new_thread = pydev_monkey.get_original_start_new_thread(thread)
start_new_thread(increase_tracing_count, ())
proceed.acquire() # Only proceed after the release() is done.
proceed = None
# Note: The set_trace_func is not really used anymore in the C side.
set_trace_func = TracingFunctionHolder._original_tracing or sys.settrace
lib = _load_python_helper_lib()
if lib is None: # This is the case if it's not CPython.
pydev_log.info(
'Unable to load helper lib to set tracing to all threads (unsupported python vm).'
)
ret = -1
else:
try:
result = lib.AttachDebuggerTracing(
ctypes.c_int(show_debug_info),
ctypes.py_object(set_trace_func),
ctypes.py_object(tracing_func),
ctypes.c_uint(thread_ident),
ctypes.py_object(None),
)
except:
if DebugInfoHolder.DEBUG_TRACE_LEVEL >= 1:
# There is no need to show this unless debug tracing is enabled.
pydev_log.exception('Error attaching debugger tracing')
ret = -1
else:
if result != 0:
pydev_log.info(
'Unable to set tracing for existing thread. Result: %s',
result)
ret = result
return ret
def set_trace_to_threads(tracing_func):
lib = load_python_helper_lib()
if lib is None: # This is the case if it's not CPython.
return -1
if hasattr(sys, 'getswitchinterval'):
get_interval, set_interval = sys.getswitchinterval, sys.setswitchinterval
else:
get_interval, set_interval = sys.getcheckinterval, sys.setcheckinterval
prev_value = get_interval()
ret = 0
try:
if not IS_PY37_OR_GREATER:
# Prevent going to any other thread... if we switch the thread during this operation we
# could potentially corrupt the interpreter.
# Note: on CPython 3.7 onwards this is not needed (we have a different implementation
# for setting the tracing for other threads in this case).
set_interval(2 ** 15)
set_trace_func = TracingFunctionHolder._original_tracing or sys.settrace
# Note: use sys._current_frames() keys to get the thread ids because it'll return
# thread ids created in C/C++ where there's user code running, unlike the APIs
# from the threading module which see only threads created through it (unless
# a call for threading.current_thread() was previously done in that thread,
# in which case a dummy thread would've been created for it).
thread_idents = set(sys._current_frames().keys())
thread_idents = thread_idents.difference(
# Ignore pydevd threads.
set(t.ident for t in threading.enumerate() if getattr(t, 'pydev_do_not_trace', False))
)
curr_ident = thread.get_ident()
curr_thread = threading._active.get(curr_ident)
for thread_ident in thread_idents:
# If that thread is not available in the threading module we also need to create a
# dummy thread for it (otherwise it'll be invisible to the debugger).
if thread_ident not in threading._active:
class _DummyThread(threading._DummyThread):
def _set_ident(self):
# Note: Hack to set the thread ident that we want.
if IS_PY2:
self._Thread__ident = thread_ident
else:
self._ident = thread_ident
t = _DummyThread()
# Reset to the base class (don't expose our own version of the class).
t.__class__ = threading._DummyThread
with threading._active_limbo_lock:
# On Py2 it'll put in active getting the current indent, not using the
# ident that was set, so, we have to update it (should be harmless on Py3
# so, do it always).
threading._active[thread_ident] = t
threading._active[curr_ident] = curr_thread
if t.ident != thread_ident:
# Check if it actually worked.
pydev_log.error('pydevd: creation of _DummyThread with fixed thread ident did not succeed.')
# Some (ptvsd) tests failed because of this, so, leave it always disabled for now.
# show_debug_info = 1 if DebugInfoHolder.DEBUG_TRACE_LEVEL >= 1 else 0
show_debug_info = 0
if IS_PY37_OR_GREATER:
# Hack to increase _Py_TracingPossible.
# See comments on py_settrace_37.hpp
proceed = thread.allocate_lock()
proceed.acquire()
def dummy_trace_on_py37(frame, event, arg):
return dummy_trace_on_py37
def increase_tracing_count_on_py37():
SetTrace(dummy_trace_on_py37)
proceed.release()
start_new_thread = pydev_monkey.get_original_start_new_thread(thread)
start_new_thread(increase_tracing_count_on_py37, ())
proceed.acquire() # Only proceed after the release() is done.
proceed = None
result = lib.AttachDebuggerTracing(
ctypes.c_int(show_debug_info),
ctypes.py_object(set_trace_func),
ctypes.py_object(tracing_func),
ctypes.c_uint(thread_ident),
ctypes.py_object(None),
)
if result != 0:
pydev_log.info('Unable to set tracing for existing threads. Result: %s' % result)
ret = result
finally:
if not IS_PY37_OR_GREATER:
set_interval(prev_value)
return ret
def set_trace_to_threads(tracing_func, target_threads=None):
if not IS_CPYTHON or ctypes is None or sys.version_info[:2] > (3, 7):
return -1
if IS_WINDOWS:
if IS_64BIT_PROCESS:
suffix = 'amd64'
else:
suffix = 'x86'
filename = os.path.join(os.path.dirname(__file__),
'pydevd_attach_to_process',
'attach_%s.dll' % (suffix, ))
elif IS_LINUX:
if IS_64BIT_PROCESS:
suffix = 'amd64'
else:
suffix = 'x86'
filename = os.path.join(os.path.dirname(__file__),
'pydevd_attach_to_process',
'attach_linux_%s.so' % (suffix, ))
elif IS_MAC:
if IS_64BIT_PROCESS:
suffix = 'x86_64.dylib'
else:
suffix = 'x86.dylib'
filename = os.path.join(os.path.dirname(__file__),
'pydevd_attach_to_process',
'attach_%s' % (suffix, ))
else:
pydev_log.info('Unable to set trace to all threads in platform: %s',
sys.platform)
return -1
if not os.path.exists(filename):
pydev_log.critical('Expected: %s to exist.', filename)
return -1
try:
lib = ctypes.cdll.LoadLibrary(filename)
except:
pydev_log.exception('Error loading: %s', filename)
return -1
if hasattr(sys, 'getswitchinterval'):
get_interval, set_interval = sys.getswitchinterval, sys.setswitchinterval
else:
get_interval, set_interval = sys.getcheckinterval, sys.setcheckinterval
prev_value = get_interval()
ret = 0
try:
# Prevent going to any other thread... if we switch the thread during this operation we
# could potentially corrupt the interpreter.
set_interval(2**15)
set_trace_func = TracingFunctionHolder._original_tracing or sys.settrace
if target_threads is None:
target_threads = list(threading.enumerate())
for t in target_threads:
if t and not getattr(t, 'pydev_do_not_trace', None):
show_debug_info = 0
result = lib.AttachDebuggerTracing(
ctypes.c_int(show_debug_info),
ctypes.py_object(set_trace_func),
ctypes.py_object(tracing_func), ctypes.c_uint(t.ident))
if result != 0:
pydev_log.info(
'Unable to set tracing for existing threads. Result: %s',
result)
ret = result
finally:
set_interval(prev_value)
return ret
def process_net_command(py_db, cmd_id, seq, text):
'''Processes a command received from the Java side
@param cmd_id: the id of the command
@param seq: the sequence of the command
@param text: the text received in the command
@note: this method is run as a big switch... after doing some tests, it's not clear whether changing it for
a dict id --> function call will have better performance result. A simple test with xrange(10000000) showed
that the gains from having a fast access to what should be executed are lost because of the function call in
a way that if we had 10 elements in the switch the if..elif are better -- but growing the number of choices
makes the solution with the dispatch look better -- so, if this gets more than 20-25 choices at some time,
it may be worth refactoring it (actually, reordering the ifs so that the ones used mostly come before
probably will give better performance).
'''
# print(ID_TO_MEANING[str(cmd_id)], repr(text))
py_db._main_lock.acquire()
try:
try:
cmd = None
if cmd_id == CMD_RUN:
py_db.ready_to_run = True
elif cmd_id == CMD_SET_PROTOCOL:
expected = (NetCommand.HTTP_PROTOCOL,
NetCommand.QUOTED_LINE_PROTOCOL)
text = text.strip()
assert text.strip(
) in expected, 'Protocol (%s) should be one of: %s' % (
text, expected)
NetCommand.protocol = text
cmd = py_db.cmd_factory.make_protocol_set_message(seq)
elif cmd_id == CMD_VERSION:
# response is version number
# ide_os should be 'WINDOWS' or 'UNIX'.
# Default based on server process (although ideally the IDE should
# provide it).
if IS_WINDOWS:
ide_os = 'WINDOWS'
else:
ide_os = 'UNIX'
# Breakpoints can be grouped by 'LINE' or by 'ID'.
breakpoints_by = 'LINE'
splitted = text.split('\t')
if len(splitted) == 1:
_local_version = splitted
elif len(splitted) == 2:
_local_version, ide_os = splitted
elif len(splitted) == 3:
_local_version, ide_os, breakpoints_by = splitted
if breakpoints_by == 'ID':
py_db._set_breakpoints_with_id = True
else:
py_db._set_breakpoints_with_id = False
pydevd_file_utils.set_ide_os(ide_os)
cmd = py_db.cmd_factory.make_version_message(seq)
elif cmd_id == CMD_LIST_THREADS:
# response is a list of threads
cmd = py_db.cmd_factory.make_list_threads_message(seq)
elif cmd_id == CMD_GET_THREAD_STACK:
thread_id = text
t = pydevd_find_thread_by_id(thread_id)
frame = None
if t and not getattr(t, 'pydev_do_not_trace', None):
additional_info = set_additional_thread_info(t)
frame = additional_info.get_topmost_frame(t)
try:
cmd = py_db.cmd_factory.make_get_thread_stack_message(
seq, thread_id, frame)
finally:
frame = None
t = None
elif cmd_id == CMD_THREAD_KILL:
int_cmd = InternalTerminateThread(text)
py_db.post_internal_command(int_cmd, text)
elif cmd_id == CMD_THREAD_SUSPEND:
# Yes, thread suspend is done at this point, not through an internal command.
threads = []
if text.strip() == '*':
threads = threading.enumerate()
elif text.startswith('__frame__:'):
sys.stderr.write("Can't suspend tasklet: %s\n" % (text, ))
else:
threads = [pydevd_find_thread_by_id(text)]
for t in threads:
if t and not getattr(t, 'pydev_do_not_trace', None):
additional_info = set_additional_thread_info(t)
frame = additional_info.get_topmost_frame(t)
if frame is not None:
try:
py_db.set_trace_for_frame_and_parents(frame)
finally:
frame = None
py_db.set_suspend(t, CMD_THREAD_SUSPEND)
elif cmd_id == CMD_THREAD_RUN:
threads = []
if text.strip() == '*':
threads = threading.enumerate()
elif text.startswith('__frame__:'):
sys.stderr.write("Can't make tasklet run: %s\n" % (text, ))
else:
threads = [pydevd_find_thread_by_id(text)]
for t in threads:
if t and not getattr(t, 'pydev_do_not_trace', None):
additional_info = set_additional_thread_info(t)
additional_info.pydev_step_cmd = -1
additional_info.pydev_step_stop = None
additional_info.pydev_state = STATE_RUN
elif cmd_id == CMD_STEP_INTO or cmd_id == CMD_STEP_OVER or cmd_id == CMD_STEP_RETURN or \
cmd_id == CMD_STEP_INTO_MY_CODE:
# we received some command to make a single step
t = pydevd_find_thread_by_id(text)
if t:
thread_id = get_thread_id(t)
int_cmd = InternalStepThread(thread_id, cmd_id)
py_db.post_internal_command(int_cmd, thread_id)
elif text.startswith('__frame__:'):
sys.stderr.write("Can't make tasklet step command: %s\n" %
(text, ))
elif cmd_id == CMD_RUN_TO_LINE or cmd_id == CMD_SET_NEXT_STATEMENT or cmd_id == CMD_SMART_STEP_INTO:
# we received some command to make a single step
thread_id, line, func_name = text.split('\t', 2)
t = pydevd_find_thread_by_id(thread_id)
if t:
int_cmd = InternalSetNextStatementThread(
thread_id, cmd_id, line, func_name)
py_db.post_internal_command(int_cmd, thread_id)
elif thread_id.startswith('__frame__:'):
sys.stderr.write(
"Can't set next statement in tasklet: %s\n" %
(thread_id, ))
elif cmd_id == CMD_RELOAD_CODE:
# we received some command to make a reload of a module
module_name = text.strip()
thread_id = '*' # Any thread
# Note: not going for the main thread because in this case it'd only do the load
# when we stopped on a breakpoint.
# for tid, t in py_db._running_thread_ids.items(): #Iterate in copy
# thread_name = t.getName()
#
# print thread_name, get_thread_id(t)
# #Note: if possible, try to reload on the main thread
# if thread_name == 'MainThread':
# thread_id = tid
int_cmd = ReloadCodeCommand(module_name, thread_id)
py_db.post_internal_command(int_cmd, thread_id)
elif cmd_id == CMD_CHANGE_VARIABLE:
# the text is: thread\tstackframe\tFRAME|GLOBAL\tattribute_to_change\tvalue_to_change
try:
thread_id, frame_id, scope, attr_and_value = text.split(
'\t', 3)
tab_index = attr_and_value.rindex('\t')
attr = attr_and_value[0:tab_index].replace('\t', '.')
value = attr_and_value[tab_index + 1:]
int_cmd = InternalChangeVariable(seq, thread_id, frame_id,
scope, attr, value)
py_db.post_internal_command(int_cmd, thread_id)
except:
traceback.print_exc()
elif cmd_id == CMD_GET_VARIABLE:
# we received some command to get a variable
# the text is: thread_id\tframe_id\tFRAME|GLOBAL\tattributes*
try:
thread_id, frame_id, scopeattrs = text.split('\t', 2)
if scopeattrs.find(
'\t') != -1: # there are attributes beyond scope
scope, attrs = scopeattrs.split('\t', 1)
else:
scope, attrs = (scopeattrs, None)
int_cmd = InternalGetVariable(seq, thread_id, frame_id,
scope, attrs)
py_db.post_internal_command(int_cmd, thread_id)
except:
traceback.print_exc()
elif cmd_id == CMD_GET_ARRAY:
# we received some command to get an array variable
# the text is: thread_id\tframe_id\tFRAME|GLOBAL\tname\ttemp\troffs\tcoffs\trows\tcols\tformat
try:
roffset, coffset, rows, cols, format, thread_id, frame_id, scopeattrs = text.split(
'\t', 7)
if scopeattrs.find(
'\t') != -1: # there are attributes beyond scope
scope, attrs = scopeattrs.split('\t', 1)
else:
scope, attrs = (scopeattrs, None)
int_cmd = InternalGetArray(seq, roffset, coffset, rows,
cols, format, thread_id,
frame_id, scope, attrs)
py_db.post_internal_command(int_cmd, thread_id)
except:
traceback.print_exc()
elif cmd_id == CMD_SHOW_RETURN_VALUES:
try:
show_return_values = text.split('\t')[1]
if int(show_return_values) == 1:
py_db.show_return_values = True
else:
if py_db.show_return_values:
# We should remove saved return values
py_db.remove_return_values_flag = True
py_db.show_return_values = False
pydev_log.debug("Show return values: %s\n" %
py_db.show_return_values)
except:
traceback.print_exc()
elif cmd_id == CMD_LOAD_FULL_VALUE:
try:
thread_id, frame_id, scopeattrs = text.split('\t', 2)
vars = scopeattrs.split(NEXT_VALUE_SEPARATOR)
int_cmd = InternalLoadFullValue(seq, thread_id, frame_id,
vars)
py_db.post_internal_command(int_cmd, thread_id)
except:
traceback.print_exc()
elif cmd_id == CMD_GET_COMPLETIONS:
# we received some command to get a variable
# the text is: thread_id\tframe_id\tactivation token
try:
thread_id, frame_id, scope, act_tok = text.split('\t', 3)
int_cmd = InternalGetCompletions(seq, thread_id, frame_id,
act_tok)
py_db.post_internal_command(int_cmd, thread_id)
except:
traceback.print_exc()
elif cmd_id == CMD_GET_DESCRIPTION:
try:
thread_id, frame_id, expression = text.split('\t', 2)
int_cmd = InternalGetDescription(seq, thread_id, frame_id,
expression)
py_db.post_internal_command(int_cmd, thread_id)
except:
traceback.print_exc()
elif cmd_id == CMD_GET_FRAME:
thread_id, frame_id, scope = text.split('\t', 2)
int_cmd = InternalGetFrame(seq, thread_id, frame_id)
py_db.post_internal_command(int_cmd, thread_id)
elif cmd_id == CMD_SET_BREAK:
# func name: 'None': match anything. Empty: match global, specified: only method context.
# command to add some breakpoint.
# text is file\tline. Add to breakpoints dictionary
suspend_policy = "NONE" # Can be 'NONE' or 'ALL'
is_logpoint = False
hit_condition = None
if py_db._set_breakpoints_with_id:
try:
try:
breakpoint_id, type, file, line, func_name, condition, expression, hit_condition, is_logpoint, suspend_policy = text.split(
'\t', 9)
except ValueError: # not enough values to unpack
# No suspend_policy passed (use default).
breakpoint_id, type, file, line, func_name, condition, expression, hit_condition, is_logpoint = text.split(
'\t', 8)
is_logpoint = is_logpoint == 'True'
except ValueError: # not enough values to unpack
breakpoint_id, type, file, line, func_name, condition, expression = text.split(
'\t', 6)
breakpoint_id = int(breakpoint_id)
line = int(line)
# We must restore new lines and tabs as done in
# AbstractDebugTarget.breakpointAdded
condition = condition.replace("@_@NEW_LINE_CHAR@_@", '\n').\
replace("@_@TAB_CHAR@_@", '\t').strip()
expression = expression.replace("@_@NEW_LINE_CHAR@_@", '\n').\
replace("@_@TAB_CHAR@_@", '\t').strip()
else:
# Note: this else should be removed after PyCharm migrates to setting
# breakpoints by id (and ideally also provides func_name).
type, file, line, func_name, suspend_policy, condition, expression = text.split(
'\t', 6)
# If we don't have an id given for each breakpoint, consider
# the id to be the line.
breakpoint_id = line = int(line)
condition = condition.replace("@_@NEW_LINE_CHAR@_@", '\n'). \
replace("@_@TAB_CHAR@_@", '\t').strip()
expression = expression.replace("@_@NEW_LINE_CHAR@_@", '\n'). \
replace("@_@TAB_CHAR@_@", '\t').strip()
if not IS_PY3K: # In Python 3, the frame object will have unicode for the file, whereas on python 2 it has a byte-array encoded with the filesystem encoding.
file = file.encode(file_system_encoding)
file = pydevd_file_utils.norm_file_to_server(file)
if not pydevd_file_utils.exists(file):
sys.stderr.write('pydev debugger: warning: trying to add breakpoint'\
' to file that does not exist: %s (will have no effect)\n' % (file,))
sys.stderr.flush()
if condition is not None and (len(condition) <= 0
or condition == "None"):
condition = None
if expression is not None and (len(expression) <= 0
or expression == "None"):
expression = None
if hit_condition is not None and (len(hit_condition) <= 0
or hit_condition == "None"):
hit_condition = None
if type == 'python-line':
breakpoint = LineBreakpoint(line,
condition,
func_name,
expression,
suspend_policy,
hit_condition=hit_condition,
is_logpoint=is_logpoint)
breakpoints = py_db.breakpoints
file_to_id_to_breakpoint = py_db.file_to_id_to_line_breakpoint
supported_type = True
else:
result = None
plugin = py_db.get_plugin_lazy_init()
if plugin is not None:
result = plugin.add_breakpoint(
'add_line_breakpoint',
py_db,
type,
file,
line,
condition,
expression,
func_name,
hit_condition=hit_condition,
is_logpoint=is_logpoint)
if result is not None:
supported_type = True
breakpoint, breakpoints = result
file_to_id_to_breakpoint = py_db.file_to_id_to_plugin_breakpoint
else:
supported_type = False
if not supported_type:
raise NameError(type)
if DebugInfoHolder.DEBUG_TRACE_BREAKPOINTS > 0:
pydev_log.debug(
'Added breakpoint:%s - line:%s - func_name:%s\n' %
(file, line, func_name.encode('utf-8')))
sys.stderr.flush()
if file in file_to_id_to_breakpoint:
id_to_pybreakpoint = file_to_id_to_breakpoint[file]
else:
id_to_pybreakpoint = file_to_id_to_breakpoint[file] = {}
id_to_pybreakpoint[breakpoint_id] = breakpoint
py_db.consolidate_breakpoints(file, id_to_pybreakpoint,
breakpoints)
if py_db.plugin is not None:
py_db.has_plugin_line_breaks = py_db.plugin.has_line_breaks(
)
py_db.set_tracing_for_untraced_contexts_if_not_frame_eval()
py_db.enable_tracing_in_frames_while_running_if_frame_eval()
elif cmd_id == CMD_REMOVE_BREAK:
#command to remove some breakpoint
#text is type\file\tid. Remove from breakpoints dictionary
breakpoint_type, file, breakpoint_id = text.split('\t', 2)
if not IS_PY3K: # In Python 3, the frame object will have unicode for the file, whereas on python 2 it has a byte-array encoded with the filesystem encoding.
file = file.encode(file_system_encoding)
file = pydevd_file_utils.norm_file_to_server(file)
try:
breakpoint_id = int(breakpoint_id)
except ValueError:
pydev_log.error(
'Error removing breakpoint. Expected breakpoint_id to be an int. Found: %s'
% (breakpoint_id, ))
else:
file_to_id_to_breakpoint = None
if breakpoint_type == 'python-line':
breakpoints = py_db.breakpoints
file_to_id_to_breakpoint = py_db.file_to_id_to_line_breakpoint
elif py_db.get_plugin_lazy_init() is not None:
result = py_db.plugin.get_breakpoints(
py_db, breakpoint_type)
if result is not None:
file_to_id_to_breakpoint = py_db.file_to_id_to_plugin_breakpoint
breakpoints = result
if file_to_id_to_breakpoint is None:
pydev_log.error(
'Error removing breakpoint. Cant handle breakpoint of type %s'
% breakpoint_type)
else:
try:
id_to_pybreakpoint = file_to_id_to_breakpoint.get(
file, {})
if DebugInfoHolder.DEBUG_TRACE_BREAKPOINTS > 0:
existing = id_to_pybreakpoint[breakpoint_id]
sys.stderr.write(
'Removed breakpoint:%s - line:%s - func_name:%s (id: %s)\n'
% (file, existing.line,
existing.func_name.encode('utf-8'),
breakpoint_id))
del id_to_pybreakpoint[breakpoint_id]
py_db.consolidate_breakpoints(
file, id_to_pybreakpoint, breakpoints)
if py_db.plugin is not None:
py_db.has_plugin_line_breaks = py_db.plugin.has_line_breaks(
)
except KeyError:
pydev_log.error(
"Error removing breakpoint: Breakpoint id not found: %s id: %s. Available ids: %s\n"
% (file, breakpoint_id,
dict_keys(id_to_pybreakpoint)))
elif cmd_id == CMD_EVALUATE_EXPRESSION or cmd_id == CMD_EXEC_EXPRESSION:
#command to evaluate the given expression
#text is: thread\tstackframe\tLOCAL\texpression
temp_name = ""
try:
thread_id, frame_id, scope, expression, trim, temp_name = text.split(
'\t', 5)
except ValueError:
thread_id, frame_id, scope, expression, trim = text.split(
'\t', 4)
int_cmd = InternalEvaluateExpression(
seq, thread_id, frame_id, expression,
cmd_id == CMD_EXEC_EXPRESSION,
int(trim) == 1, temp_name)
py_db.post_internal_command(int_cmd, thread_id)
elif cmd_id == CMD_CONSOLE_EXEC:
#command to exec expression in console, in case expression is only partially valid 'False' is returned
#text is: thread\tstackframe\tLOCAL\texpression
thread_id, frame_id, scope, expression = text.split('\t', 3)
int_cmd = InternalConsoleExec(seq, thread_id, frame_id,
expression)
py_db.post_internal_command(int_cmd, thread_id)
elif cmd_id == CMD_SET_PY_EXCEPTION:
# Command which receives set of exceptions on which user wants to break the debugger
# text is:
#
# break_on_uncaught;
# break_on_caught;
# skip_on_exceptions_thrown_in_same_context;
# ignore_exceptions_thrown_in_lines_with_ignore_exception;
# ignore_libraries;
# TypeError;ImportError;zipimport.ZipImportError;
#
# i.e.: true;true;true;true;true;TypeError;ImportError;zipimport.ZipImportError;
#
# This API is optional and works 'in bulk' -- it's possible
# to get finer-grained control with CMD_ADD_EXCEPTION_BREAK/CMD_REMOVE_EXCEPTION_BREAK
# which allows setting caught/uncaught per exception.
splitted = text.split(';')
py_db.break_on_uncaught_exceptions = {}
py_db.break_on_caught_exceptions = {}
added = []
if len(splitted) >= 5:
if splitted[0] == 'true':
break_on_uncaught = True
else:
break_on_uncaught = False
if splitted[1] == 'true':
break_on_caught = True
else:
break_on_caught = False
if splitted[2] == 'true':
py_db.skip_on_exceptions_thrown_in_same_context = True
else:
py_db.skip_on_exceptions_thrown_in_same_context = False
if splitted[3] == 'true':
py_db.ignore_exceptions_thrown_in_lines_with_ignore_exception = True
else:
py_db.ignore_exceptions_thrown_in_lines_with_ignore_exception = False
if splitted[4] == 'true':
ignore_libraries = True
else:
ignore_libraries = False
for exception_type in splitted[5:]:
exception_type = exception_type.strip()
if not exception_type:
continue
exception_breakpoint = py_db.add_break_on_exception(
exception_type,
condition=None,
expression=None,
notify_on_handled_exceptions=break_on_caught,
notify_on_unhandled_exceptions=break_on_uncaught,
notify_on_first_raise_only=True,
ignore_libraries=ignore_libraries,
)
if exception_breakpoint is None:
continue
added.append(exception_breakpoint)
py_db.enable_tracing_in_frames_while_running_if_frame_eval(
)
py_db.set_tracing_for_untraced_contexts_if_not_frame_eval()
else:
sys.stderr.write(
"Error when setting exception list. Received: %s\n" %
(text, ))
elif cmd_id == CMD_GET_FILE_CONTENTS:
if not IS_PY3K: # In Python 3, the frame object will have unicode for the file, whereas on python 2 it has a byte-array encoded with the filesystem encoding.
text = text.encode(file_system_encoding)
if os.path.exists(text):
f = open(text, 'r')
try:
source = f.read()
finally:
f.close()
cmd = py_db.cmd_factory.make_get_file_contents(seq, source)
elif cmd_id == CMD_SET_PROPERTY_TRACE:
# Command which receives whether to trace property getter/setter/deleter
# text is feature_state(true/false);disable_getter/disable_setter/disable_deleter
if text != "":
splitted = text.split(';')
if len(splitted) >= 3:
if py_db.disable_property_trace is False and splitted[
0] == 'true':
# Replacing property by custom property only when the debugger starts
pydevd_traceproperty.replace_builtin_property()
py_db.disable_property_trace = True
# Enable/Disable tracing of the property getter
if splitted[1] == 'true':
py_db.disable_property_getter_trace = True
else:
py_db.disable_property_getter_trace = False
# Enable/Disable tracing of the property setter
if splitted[2] == 'true':
py_db.disable_property_setter_trace = True
else:
py_db.disable_property_setter_trace = False
# Enable/Disable tracing of the property deleter
if splitted[3] == 'true':
py_db.disable_property_deleter_trace = True
else:
py_db.disable_property_deleter_trace = False
else:
# User hasn't configured any settings for property tracing
pass
elif cmd_id == CMD_ADD_EXCEPTION_BREAK:
# Note that this message has some idiosyncrasies...
#
# notify_on_handled_exceptions can be 0, 1 or 2
# 0 means we should not stop on handled exceptions.
# 1 means we should stop on handled exceptions showing it on all frames where the exception passes.
# 2 means we should stop on handled exceptions but we should only notify about it once.
#
# To ignore_libraries properly, besides setting ignore_libraries to 1, the IDE_PROJECT_ROOTS environment
# variable must be set (so, we'll ignore anything not below IDE_PROJECT_ROOTS) -- this is not ideal as
# the environment variable may not be properly set if it didn't start from the debugger (we should
# create a custom message for that).
#
# There are 2 global settings which can only be set in CMD_SET_PY_EXCEPTION. Namely:
#
# py_db.skip_on_exceptions_thrown_in_same_context
# - If True, we should only show the exception in a caller, not where it was first raised.
#
# py_db.ignore_exceptions_thrown_in_lines_with_ignore_exception
# - If True exceptions thrown in lines with '@IgnoreException' will not be shown.
condition = ""
expression = ""
if text.find('\t') != -1:
try:
exception, condition, expression, notify_on_handled_exceptions, notify_on_unhandled_exceptions, ignore_libraries = text.split(
'\t', 5)
except:
exception, notify_on_handled_exceptions, notify_on_unhandled_exceptions, ignore_libraries = text.split(
'\t', 3)
else:
exception, notify_on_handled_exceptions, notify_on_unhandled_exceptions, ignore_libraries = text, 0, 0, 0
condition = condition.replace("@_@NEW_LINE_CHAR@_@",
'\n').replace(
"@_@TAB_CHAR@_@",
'\t').strip()
if condition is not None and (len(condition) == 0
or condition == "None"):
condition = None
expression = expression.replace("@_@NEW_LINE_CHAR@_@",
'\n').replace(
"@_@TAB_CHAR@_@",
'\t').strip()
if expression is not None and (len(expression) == 0
or expression == "None"):
expression = None
if exception.find('-') != -1:
breakpoint_type, exception = exception.split('-')
else:
breakpoint_type = 'python'
if breakpoint_type == 'python':
exception_breakpoint = py_db.add_break_on_exception(
exception,
condition=condition,
expression=expression,
notify_on_handled_exceptions=int(
notify_on_handled_exceptions) > 0,
notify_on_unhandled_exceptions=int(
notify_on_unhandled_exceptions) == 1,
notify_on_first_raise_only=int(
notify_on_handled_exceptions) == 2,
ignore_libraries=int(ignore_libraries) > 0)
if exception_breakpoint is not None:
py_db.enable_tracing_in_frames_while_running_if_frame_eval(
)
py_db.set_tracing_for_untraced_contexts_if_not_frame_eval(
)
else:
supported_type = False
plugin = py_db.get_plugin_lazy_init()
if plugin is not None:
supported_type = plugin.add_breakpoint(
'add_exception_breakpoint', py_db, breakpoint_type,
exception)
if supported_type:
py_db.has_plugin_exception_breaks = py_db.plugin.has_exception_breaks(
)
py_db.enable_tracing_in_frames_while_running_if_frame_eval(
)
else:
raise NameError(breakpoint_type)
elif cmd_id == CMD_REMOVE_EXCEPTION_BREAK:
exception = text
if exception.find('-') != -1:
exception_type, exception = exception.split('-')
else:
exception_type = 'python'
if exception_type == 'python':
try:
cp = py_db.break_on_uncaught_exceptions.copy()
cp.pop(exception, None)
py_db.break_on_uncaught_exceptions = cp
cp = py_db.break_on_caught_exceptions.copy()
cp.pop(exception, None)
py_db.break_on_caught_exceptions = cp
except:
pydev_log.debug("Error while removing exception %s" %
sys.exc_info()[0])
py_db.set_tracing_for_untraced_contexts_if_not_frame_eval()
else:
supported_type = False
# I.e.: no need to initialize lazy (if we didn't have it in the first place, we can't remove
# anything from it anyways).
plugin = py_db.plugin
if plugin is not None:
supported_type = plugin.remove_exception_breakpoint(
py_db, exception_type, exception)
if supported_type:
py_db.has_plugin_exception_breaks = py_db.plugin.has_exception_breaks(
)
else:
raise NameError(exception_type)
if len(py_db.break_on_caught_exceptions
) == 0 and not py_db.has_plugin_exception_breaks:
py_db.disable_tracing_while_running_if_frame_eval()
elif cmd_id == CMD_LOAD_SOURCE:
path = text
try:
if not IS_PY3K: # In Python 3, the frame object will have unicode for the file, whereas on python 2 it has a byte-array encoded with the filesystem encoding.
path = path.encode(file_system_encoding)
path = pydevd_file_utils.norm_file_to_server(path)
f = open(path, 'r')
source = f.read()
cmd = py_db.cmd_factory.make_load_source_message(
seq, source)
except:
cmd = py_db.cmd_factory.make_error_message(
seq, pydevd_tracing.get_exception_traceback_str())
elif cmd_id == CMD_ADD_DJANGO_EXCEPTION_BREAK:
exception = text
plugin = py_db.get_plugin_lazy_init()
if plugin is not None:
plugin.add_breakpoint('add_exception_breakpoint', py_db,
'django', exception)
py_db.has_plugin_exception_breaks = py_db.plugin.has_exception_breaks(
)
py_db.enable_tracing_in_frames_while_running_if_frame_eval(
)
elif cmd_id == CMD_REMOVE_DJANGO_EXCEPTION_BREAK:
exception = text
# I.e.: no need to initialize lazy (if we didn't have it in the first place, we can't remove
# anything from it anyways).
plugin = py_db.plugin
if plugin is not None:
plugin.remove_exception_breakpoint(py_db, 'django',
exception)
py_db.has_plugin_exception_breaks = py_db.plugin.has_exception_breaks(
)
if len(py_db.break_on_caught_exceptions
) == 0 and not py_db.has_plugin_exception_breaks:
py_db.disable_tracing_while_running_if_frame_eval()
elif cmd_id == CMD_EVALUATE_CONSOLE_EXPRESSION:
# Command which takes care for the debug console communication
if text != "":
thread_id, frame_id, console_command = text.split('\t', 2)
console_command, line = console_command.split('\t')
if console_command == 'EVALUATE':
int_cmd = InternalEvaluateConsoleExpression(
seq, thread_id, frame_id, line, buffer_output=True)
elif console_command == 'EVALUATE_UNBUFFERED':
int_cmd = InternalEvaluateConsoleExpression(
seq,
thread_id,
frame_id,
line,
buffer_output=False)
elif console_command == 'GET_COMPLETIONS':
int_cmd = InternalConsoleGetCompletions(
seq, thread_id, frame_id, line)
else:
raise ValueError('Unrecognized command: %s' %
(console_command, ))
py_db.post_internal_command(int_cmd, thread_id)
elif cmd_id == CMD_RUN_CUSTOM_OPERATION:
# Command which runs a custom operation
if text != "":
try:
location, custom = text.split('||', 1)
except:
sys.stderr.write(
'Custom operation now needs a || separator. Found: %s\n'
% (text, ))
raise
thread_id, frame_id, scopeattrs = location.split('\t', 2)
if scopeattrs.find(
'\t') != -1: # there are attributes beyond scope
scope, attrs = scopeattrs.split('\t', 1)
else:
scope, attrs = (scopeattrs, None)
# : style: EXECFILE or EXEC
# : encoded_code_or_file: file to execute or code
# : fname: name of function to be executed in the resulting namespace
style, encoded_code_or_file, fnname = custom.split('\t', 3)
int_cmd = InternalRunCustomOperation(
seq, thread_id, frame_id, scope, attrs, style,
encoded_code_or_file, fnname)
py_db.post_internal_command(int_cmd, thread_id)
elif cmd_id == CMD_IGNORE_THROWN_EXCEPTION_AT:
if text:
replace = 'REPLACE:' # Not all 3.x versions support u'REPLACE:', so, doing workaround.
if not IS_PY3K:
replace = unicode(replace)
if text.startswith(replace):
text = text[8:]
py_db.filename_to_lines_where_exceptions_are_ignored.clear(
)
if text:
for line in text.split(
'||'
): # Can be bulk-created (one in each line)
filename, line_number = line.split('|')
if not IS_PY3K:
filename = filename.encode(
file_system_encoding)
filename = pydevd_file_utils.norm_file_to_server(
filename)
if os.path.exists(filename):
lines_ignored = py_db.filename_to_lines_where_exceptions_are_ignored.get(
filename)
if lines_ignored is None:
lines_ignored = py_db.filename_to_lines_where_exceptions_are_ignored[
filename] = {}
lines_ignored[int(line_number)] = 1
else:
sys.stderr.write('pydev debugger: warning: trying to ignore exception thrown'\
' on file that does not exist: %s (will have no effect)\n' % (filename,))
elif cmd_id == CMD_ENABLE_DONT_TRACE:
if text:
true_str = 'true' # Not all 3.x versions support u'str', so, doing workaround.
if not IS_PY3K:
true_str = unicode(true_str)
mode = text.strip() == true_str
pydevd_dont_trace.trace_filter(mode)
elif cmd_id == CMD_REDIRECT_OUTPUT:
if text:
py_db.enable_output_redirection('STDOUT' in text, 'STDERR'
in text)
elif cmd_id == CMD_GET_NEXT_STATEMENT_TARGETS:
thread_id, frame_id = text.split('\t', 1)
int_cmd = InternalGetNextStatementTargets(
seq, thread_id, frame_id)
py_db.post_internal_command(int_cmd, thread_id)
elif cmd_id == CMD_SET_PROJECT_ROOTS:
pydevd_utils.set_project_roots(text.split(u'\t'))
elif cmd_id == CMD_THREAD_DUMP_TO_STDERR:
pydevd_utils.dump_threads()
elif cmd_id == CMD_STOP_ON_START:
py_db.stop_on_start = text.strip() in ('True', 'true', '1')
elif cmd_id == CMD_GET_EXCEPTION_DETAILS:
thread_id = text
t = pydevd_find_thread_by_id(thread_id)
frame = None
if t and not getattr(t, 'pydev_do_not_trace', None):
additional_info = set_additional_thread_info(t)
frame = additional_info.get_topmost_frame(t)
try:
cmd = py_db.cmd_factory.make_get_exception_details_message(
seq, thread_id, frame)
finally:
frame = None
t = None
else:
#I have no idea what this is all about
cmd = py_db.cmd_factory.make_error_message(
seq, "unexpected command " + str(cmd_id))
if cmd is not None:
py_db.writer.add_command(cmd)
del cmd
except Exception:
traceback.print_exc()
try:
from StringIO import StringIO
except ImportError:
from io import StringIO
stream = StringIO()
traceback.print_exc(file=stream)
cmd = py_db.cmd_factory.make_error_message(
seq,
"Unexpected exception in process_net_command.\nInitial params: %s. Exception: %s"
% (((cmd_id, seq, text), stream.getvalue())))
py_db.writer.add_command(cmd)
finally:
py_db._main_lock.release()
def get_non_pydevd_threads():
threads = threading.enumerate()
return [t for t in threads if t and not getattr(t, 'is_pydev_daemon_thread', False)]
