def _create_mqtt_client(self) -> None:
minimqtt.set_socket(self._socket, self._iface)
self._logger.debug(
str.replace(
f"- iot_mqtt :: _on_connect :: username = {self._username}, password = {self._passwd}",
"%",
"%%",
))
self._mqtts = minimqtt.MQTT(
broker=self._hostname,
username=self._username,
password=self._passwd,
port=8883,
keep_alive=120,
is_ssl=True,
client_id=self._device_id,
)
self._mqtts.enable_logger(logging, self._logger.getEffectiveLevel())
# set actions to take throughout connection lifecycle
self._mqtts.on_connect = self._on_connect
self._mqtts.on_publish = self._on_publish
self._mqtts.on_disconnect = self._on_disconnect
# initiate the connection using the adafruit_minimqtt library
self._mqtts.connect()
def initialize(myName, motorFunc):
robotName = myName
esp32_cs = DigitalInOut(board.D13)
esp32_ready = DigitalInOut(board.D11)
esp32_reset = DigitalInOut(board.D12)
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready,
esp32_reset)
if esp.status == adafruit_esp32spi.WL_IDLE_STATUS:
broadcast.send("ESP32 found")
"""Use below for Most Boards"""
status_light = neopixel.NeoPixel(
board.NEOPIXEL, 1, brightness=0.2) # Uncomment for Most Boards
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(
esp, secrets, status_light)
### Feeds ###
publishes["status"] = "{}/status".format(robotName)
subscribes["motor"] = "{}/cmd/motor".format(robotName)
subscribe_funcs["{}/cmd/motor".format(robotName)] = motorFunc
subscribes["beep"] = "{}/cmd/beep".format(robotName)
subscribes["servo"] = "{}/cmd/servo".format(robotName)
# Connect to WiFi
broadcast.send("Connecting to WiFi...")
try:
wifi.connect()
broadcast.send("Connected!")
except:
broadcast.send("Could not connect")
raise
# Initialize MQTT interface with the esp interface
minimqtt.set_socket(socket, esp)
# Set up a MiniMQTT Client
global mqtt_client
mqtt_client = minimqtt.MQTT(
broker=secrets["mqtt_broker"],
port=1883,
)
# Setup the callback methods above
mqtt_client.on_connect = connected
mqtt_client.on_disconnect = disconnected
mqtt_client.on_message = message
# Connect the client to the MQTT broker.
broadcast.send("Connecting to MQTT Broker {}...".format(
secrets["mqtt_broker_name"]))
mqtt_client.connect()
broadcast.send("MQTT initialized")
global MQTT
MQTT = True
def __init__(self):
# Get wifi details and more from a secrets.py file
esp32_cs = DigitalInOut(board.D13)
esp32_ready = DigitalInOut(board.D11)
esp32_reset = DigitalInOut(board.D12)
self.spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
self.esp = adafruit_esp32spi.ESP_SPIcontrol(self.spi, esp32_cs,
esp32_ready, esp32_reset)
if self.esp.status == adafruit_esp32spi.WL_IDLE_STATUS:
print("ESP32 found and in idle mode")
print("Firmware vers.", self.esp.firmware_version)
print("MAC addr:", [hex(i) for i in self.esp.MAC_address])
"""Use below for Most Boards"""
# status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2) # Uncomment for Most Boards
#status_light = pygamer.pygamerNeoPixels
self.wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(
self.esp, secrets) #, status_light)
### Feeds ###
self.status_feed = "roger/status/#"
self.motor_cmd_feed = "roger/cmd/feather/motor"
self.beep_cmd_feed = "roger/cmd/feather/beep"
self.servo_cmd_feed = "roger/cmd/feather/servo"
# Connect to WiFi
print("Connecting to WiFi...")
self.wifi.connect()
print("Connected!")
# Initialize MQTT interface with the esp interface
MQTT.set_socket(socket, self.esp)
# Set up a MiniMQTT Client
self.mqtt_client = MQTT.MQTT(
broker=secrets["mqtt_broker"],
port=1883,
)
# Setup the callback methods above
self.mqtt_client.on_connect = self.connected
self.mqtt_client.on_disconnect = self.disconnected
self.mqtt_client.on_message = self.message
# Connect the client to the MQTT broker.
print("Connecting to MQTT...Broker {0}".format(
secrets["mqtt_broker_name"]))
self.mqtt_client.connect()
print("Connected to broker {0}".format(secrets["mqtt_broker_name"]))
def __init__(self, name, status_light):
esp32_cs = DigitalInOut(board.D13)
esp32_ready = DigitalInOut(board.D11)
esp32_reset = DigitalInOut(board.D12)
self.spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
self.esp = adafruit_esp32spi.ESP_SPIcontrol(self.spi, esp32_cs, esp32_ready, esp32_reset)
if self.esp.status == adafruit_esp32spi.WL_IDLE_STATUS:
print("ESP32 found and in idle mode")
print("Firmware vers.", self.esp.firmware_version)
print("MAC addr:", [hex(i) for i in self.esp.MAC_address])
self.status_light = status_light # pygamer.pygamerNeoPixels
self.wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(self.esp, secrets, self.status_light)
### Feeds ###
self.name = name
self.status_feed = "{0}/status".format(name)
# Connect to WiFi
print("Connecting to WiFi...")
self.wifi.connect()
print("Connected!")
# Initialize MQTT interface with the esp interface
MQTT.set_socket(socket, self.esp)
# Set up a MiniMQTT Client
self.mqtt_client = MQTT.MQTT(
broker=secrets["mqtt_broker"],
port=1883,
)
# Setup the callback methods above
self.mqtt_client.on_connect = self.connected
self.mqtt_client.on_disconnect = self.disconnected
self.mqtt_client.on_message = self.message
# Connect the client to the MQTT broker.
print("Connecting to MQTT...Broker {0}".format(secrets["mqtt_broker_name"]))
self.mqtt_client.connect()
print("Connected to broker {0}".format(secrets["mqtt_broker_name"]))
self.publish_message(self.status_feed, "{0} has connected to {1}".format(name, secrets["mqtt_broker_name"]))
def register_device(self, expiry: int) -> str:
"""
Registers the device with the IoT Central device registration service.
Returns the hostname of the IoT hub to use over MQTT
:param int expiry: The expiry time for the registration
:returns: The underlying IoT Hub that this device should connect to
:rtype: str
:raises DeviceRegistrationError: if the device cannot be registered successfully
:raises RuntimeError: if the internet connection is not responding or is unable to connect
"""
username = f"{self._id_scope}/registrations/{self._device_id}/api-version={constants.DPS_API_VERSION}"
# pylint: disable=C0103
sr = self._id_scope + "%2Fregistrations%2F" + self._device_id
sig_no_encode = compute_derived_symmetric_key(self._key,
sr + "\n" + str(expiry))
sig_encoded = quote(sig_no_encode, "~()*!.'")
auth_string = f"SharedAccessSignature sr={sr}&sig={sig_encoded}&se={str(expiry)}&skn=registration"
minimqtt.set_socket(self._socket, self._iface)
self._mqtt = minimqtt.MQTT(
broker=constants.DPS_END_POINT,
username=username,
password=auth_string,
port=8883,
keep_alive=120,
is_ssl=True,
client_id=self._device_id,
)
self._mqtt.enable_logger(logging, self._logger.getEffectiveLevel())
self._connect_to_mqtt()
self._start_registration()
self._wait_for_operation()
self._mqtt.disconnect()
return str(self._hostname)
def _create_mqtt_client(self) -> None:
minimqtt.set_socket(self._socket, self._iface)
self._mqtts = MQTT(
broker=self._hostname,
username=self._username,
password=self._passwd,
port=8883,
keep_alive=120,
is_ssl=True,
client_id=self._device_id,
log=True,
)
self._mqtts.logger.setLevel(self._logger.getEffectiveLevel())
# set actions to take throughout connection lifecycle
self._mqtts.on_connect = self._on_connect
self._mqtts.on_log = self._on_log
self._mqtts.on_publish = self._on_publish
self._mqtts.on_disconnect = self._on_disconnect
# initiate the connection using the adafruit_minimqtt library
self._mqtts.connect()
# pylint: disable=unused-argument
def message(client, feed_id, payload):
# Message function will be called when a subscribed feed has a new value.
# The feed_id parameter identifies the feed, and the payload parameter has
# the new value.
print("Feed {0} received new value: {1}".format(feed_id, payload))
# Connect to WiFi
print("Connecting to WiFi...")
wifi.connect()
print("Connected!")
# Initialize MQTT interface with the esp interface
MQTT.set_socket(socket, esp)
# Initialize a new MQTT Client object
mqtt_client = MQTT.MQTT(
broker="io.adafruit.com",
username=secrets["aio_username"],
password=secrets["aio_key"],
)
# Initialize an Adafruit IO MQTT Client
io = IO_MQTT(mqtt_client)
# Connect the callback methods defined above to Adafruit IO
io.on_connect = connected
io.on_disconnect = disconnected
io.on_message = message
# pylint: disable=unused-argument
def disconnected(client):
# Disconnected function will be called when the client disconnects.
print("Disconnected from Adafruit IO!")
# pylint: disable=unused-argument
def message(client, feed_id, payload):
# Message function will be called when a subscribed feed has a new value.
# The feed_id parameter identifies the feed, and the payload parameter has
# the new value.
print("Feed {0} received new value: {1}".format(feed_id, payload))
# Initialize MQTT interface with the ethernet interface
MQTT.set_socket(socket, eth)
# Initialize a new MQTT Client object
mqtt_client = MQTT.MQTT(
broker="io.adafruit.com",
username=secrets["aio_user"],
password=secrets["aio_key"],
)
# Initialize an Adafruit IO MQTT Client
io = IO_MQTT(mqtt_client)
# Connect the callback methods defined above to Adafruit IO
io.on_connect = connected
io.on_disconnect = disconnected
io.on_subscribe = subscribe
network = network.CELLULAR(
fona, (secrets["apn"], secrets["apn_username"], secrets["apn_password"]))
while not network.is_attached:
print("Attaching to network...")
time.sleep(0.5)
print("Attached!")
while not network.is_connected:
print("Connecting to network...")
network.connect()
time.sleep(0.5)
print("Network Connected!")
# Initialize MQTT interface with the cellular interface
MQTT.set_socket(socket, fona)
# Set up a MiniMQTT Client
client = MQTT.MQTT(
broker=secrets["broker"],
username=secrets["user"],
password=secrets["pass"],
is_ssl=False,
)
# Connect callback handlers to client
client.on_connect = connect
client.on_disconnect = disconnect
client.on_subscribe = subscribe
client.on_unsubscribe = unsubscribe
client.on_publish = publish
Isconnected = False
# Get MQTT details and more from a secrets.py file
try:
from secrets import secrets
except ImportError:
print("MQTT secrets are kept in secrets.py, please add them there!")
raise
# Connect to WiFi
print("Connecting to WiFi...")
wifi.wifi.connect()
print("Connected!")
# Initialize MQTT interface with the esp interface
MQTT.set_socket(socket, wifi.esp)
# Set up a MiniMQTT Client
mqtt_client = MQTT.MQTT(broker=secrets["broker"], port=secrets["port"])
### MQTT Code ###
# Define callback methods which are called when events occur
# pylint: disable=unused-argument, redefined-outer-name
def connected(client, userdata, flags, rc):
global Isconnected
Isconnected = True
# This function will be called when the client is connected
# successfully to the broker.
print("Connected to MQTT broker!")
mqtt_broker = "test.mosquitto.org"
mqtt_topic = "hello"
def handle_connect(client, userdata, flags, rc):
print("Connected to {0}".format(client.broker))
mqtt_client.subscribe(mqtt_topic)
def handle_subscribe(client, userdata, topic, granted_qos):
print("Subscribed to {0} with QOS {1}".format(topic, granted_qos))
def handle_message(client, topic, message):
print("Received on {0}: {1}".format(topic, message))
adafruit_minimqtt.set_socket(adafruit_esp32spi_socket, wifi)
mqtt_client = adafruit_minimqtt.MQTT(broker=mqtt_broker, is_ssl=False)
# Set callback handlers
mqtt_client.on_connect = handle_connect
mqtt_client.on_subscribe = handle_subscribe
mqtt_client.on_message = handle_message
print("\nConnecting to {0}".format(mqtt_broker))
mqtt_client.connect()
while True:
mqtt_client.loop()
"""Method callled when a client's subscribed feed has a new
value.
:param str topic: The topic of the feed with a new value.
:param str message: The new value
"""
print("New message on topic {0}: {1}".format(topic, message))
# Connect to WiFi
print("Connecting to WiFi...")
wifi.connect()
print("Connected!")
# Initialize MQTT interface with the esp interface
# pylint: disable=protected-access
MQTT.set_socket(socket, pyportal._esp)
# Set up a MiniMQTT Client
mqtt_client = MQTT.MQTT(
broker=secrets["broker"],
username=secrets["user"],
password=secrets["pass"],
is_ssl=False,
)
# Setup the callback methods above
mqtt_client.on_connect = connected
mqtt_client.on_disconnect = disconnected
mqtt_client.on_message = message
# Connect the client to the MQTT broker.
def disconnected(client, userdata, rc):
# This method is called when the client is disconnected
print("Disconnected from MQTT Broker!")
def message(client, topic, message):
"""Method callled when a client's subscribed feed has a new
value.
:param str topic: The topic of the feed with a new value.
:param str message: The new value
"""
print("New message on topic {0}: {1}".format(topic, message))
# Initialize MQTT interface with the esp interface
MQTT.set_socket(socket, uart)
# Set up a MiniMQTT Client
mqtt_client = MQTT.MQTT(broker=secrets['broker'],
port=443,
username=secrets['user'],
password=secrets['pass'])
# Setup the callback methods above
mqtt_client.on_connect = connected
mqtt_client.on_disconnect = disconnected
mqtt_client.on_message = message
photocell_val = 0
while True:
import adafruit_esp32spi.adafruit_esp32spi_socket as socket
from secrets import secrets
# --- Display setup ---
matrixportal = MatrixPortal(status_neopixel=board.NEOPIXEL, debug=False)
network = matrixportal.network
network.connect()
mqtt = MQTT.MQTT(
broker=secrets.get("mqtt_broker"),
username=secrets.get("mqtt_user"),
password=secrets.get("mqtt_password"),
port=1883,
)
MQTT.set_socket(socket, network._wifi.esp)
TEAM_1_COLOR = 0x00AA00
TEAM_2_COLOR = 0xAAAAAA
# Team 1 Score
matrixportal.add_text(
text_font=terminalio.FONT,
text_position=(2, int(matrixportal.graphics.display.height * 0.75) - 3),
text_color=TEAM_1_COLOR,
text_scale=2,
)
# Team 2 Score
matrixportal.add_text(
text_font=terminalio.FONT,
"""Method callled when a client's subscribed feed has a new
value.
:param str topic: The topic of the feed with a new value.
:param str message: The new value
"""
print("New message on topic {0}: {1}".format(topic, message))
# Connect to WiFi
print("Connecting to WiFi...")
pyportal.network.connect()
print("Connected!")
# Initialize MQTT interface with the esp interface
# pylint: disable=protected-access
MQTT.set_socket(socket, pyportal.network._wifi.esp)
# Set up a MiniMQTT Client
mqtt_client = MQTT.MQTT(
broker=secrets["broker"],
username=secrets["user"],
password=secrets["pass"],
is_ssl=False,
)
# Setup the callback methods above
mqtt_client.on_connect = connected
mqtt_client.on_disconnect = disconnected
mqtt_client.on_message = message
# Connect the client to the MQTT broker.
# pylint: disable=unused-argument
def disconnected(client):
# Disconnected function will be called when the client disconnects.
print("Disconnected from Adafruit IO!")
# pylint: disable=unused-argument
def message(client, feed_id, payload):
# Message function will be called when a subscribed feed has a new value.
# The feed_id parameter identifies the feed, and the payload parameter has
# the new value.
print("Feed {0} received new value: {1}".format(feed_id, payload))
# Initialize MQTT interface with the ethernet interface
MQTT.set_socket(cellular_socket, fona)
# Initialize a new MQTT Client object
mqtt_client = MQTT.MQTT(
broker="io.adafruit.com", username=secrets["aio_user"], password=secrets["aio_key"],
)
# Initialize an Adafruit IO MQTT Client
io = IO_MQTT(mqtt_client)
# Connect the callback methods defined above to Adafruit IO
io.on_connect = connected
io.on_disconnect = disconnected
io.on_subscribe = subscribe
io.on_unsubscribe = unsubscribe
io.on_message = message