def activate(self):
assert self.params['address']
assert self.params['bus']
if 'name' in self.params:
self.name = self.params['name'] + ' %i:%s' % (
self.params['bus'], hex(self.params['address']))
if not 'driver' in self.params.keys(): self.params['driver'] = None
self.params['n_channels'] = 4
if not 'channel_names' in self.config:
self.config['channel_names'] = [
'Lux', 'IR', 'Visible', 'Full Spectrum'
]
self.params['VIS_RANGE'] = float(2**32)
self.params['IR_RANGE'] = float(2**16)
self.params['raw_units'] = ['lux', '', '', '']
self.config['eng_units'] = ['lux', '', '', '']
self.config['scale'] = np.ones(self.params['n_channels'], )
self.config['offset'] = np.zeros(self.params['n_channels'], )
if ('untitled' in self.name.lower()) or (self.name == ''):
self.name = 'TSL2591 Light Sensor I2C %i:%s' % (
self.params['bus'], self.params['address'])
self.i2c = busio.I2C(board.SCL, board.SDA)
self.dev = adafruit_tsl2591.TSL2591(self.i2c)
return
def __init__(self) -> None:
i2c = I2C(SCL, SDA)
tsl = adafruit_tsl2591.TSL2591(i2c)
# set gain and integration time; gain 0 = 1x & 1 = 16x. Integration time of 1 = 101ms
tsl.gain = 0
tsl.integration_time = 1 # 101 ms intergration time.
self.tsl = tsl
def __init__(self,
gain=adafruit_tsl2591.GAIN_MED,
integration_time=adafruit_tsl2591.INTEGRATIONTIME_200MS):
# Initialize sensor
self.i2c = busio.I2C(board.SCL, board.SDA)
self.sensor = adafruit_tsl2591.TSL2591(self.i2c)
self.sensor.gain = gain
self.sensor.integration_time = integration_time
def __init__(self,
i2c_bus,
name="sns_hdlt",
interval=SENSOR_UPDATE_INTERVAL,
*args,
**kwargs):
Device.__init__(self, name=name, interval=interval, *args, **kwargs)
import adafruit_tsl2591
self.sensor = adafruit_tsl2591.TSL2591(i2c_bus)
def tsl():
print(colored("TSL2591 started. . .", 'green'))
tsl = adafruit_tsl2591.TSL2591(i2c)
while True:
lux = round(tsl.lux, 2)
with lock:
database.create_record(conn, "Measurements", ("lux", lux))
# client.publish("greenhouse/lux", lux)
# print(lux, " lux")
time.sleep(measurement_interval)
def read_all_sensors(tca): sensor_reading = [] for i in range(8): try: tsl=adafruit_tsl2591.TSL2591(tca[i]) sensor_reading.append(tsl.lux) except ValueError: pass # ValueError arises normally the sensor is missing at that position. return sensor_reading
def plugin_init(config):
""" Initialise the plugin.
Args:
config: JSON configuration document for the plugin configuration category
Returns:
handle: JSON object to be used in future calls to the plugin
Raises:
"""
i2c = busio.I2C(board.SCL, board.SDA)
handle = copy.deepcopy(config)
handle['sensor']=adafruit_tsl2591.TSL2591(i2c)
return handle
def init():
i2c = busio.I2C(board.SCL, board.SDA)
sensor = adafruit_tsl2591.TSL2591(i2c)
#sensor.gain = adafruit_tsl2591.GAIN_LOW
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)
GPIO.setup(ready_led, GPIO.OUT)
GPIO.setup(running_led, GPIO.OUT)
GPIO.setup(complete_led, GPIO.OUT)
GPIO.output(ready_led, GPIO.HIGH)
GPIO.output(running_led, GPIO.LOW)
GPIO.output(complete_led, GPIO.LOW)
return sensor
def init():
"""Initialize TSL2591 Lux Sensor
Returns:
int: 0 = OK | -1 = ERR
"""
global sensor
try:
sensor = adafruit_tsl2591.TSL2591(i2c)
return 0
except:
print("Failed to Initialize Sensor")
return -1
def __init__(self, time_idx, prev_turbulences=None):
# Read in light data
# Initialize the I2C bus.
i2c = busio.I2C(board.SCL, board.SDA)
# Initialize the sensor.
sensor = adafruit_tsl2591.TSL2591(i2c)
self.light = int(sensor.lux)
self.prev_turbulences = prev_turbulences
# Facial Expression
facial_expr = main_predict()
if facial_expr == None:
self.emotion = neutral
else:
self.emotion = facial_expr
self.emotion = self.emotion[0].upper() + self.emotion[1:]
# Pressure (from verify.py)
#take a reading
input = GPIO.input(GPIO_pin)
if input:
self.pressure = True
print("Under Pressure")
else:
self.pressure = False
# Turbulence
with open('Daher_Turbulence_data.csv') as csvfile:
readCSV = csv.reader(csvfile, delimiter=',')
row = [line for idx, line in enumerate(readCSV) if idx == time_idx]
row = row[0]
row[1] = int(row[1])
row[2] = float(row[2])
row[3] = float(row[3])
# row = readCSV[time_idx]
if self.prev_turbulences:
if len(self.prev_turbulences
) == 5: # TODO could edit for more effects
self.prev_turbulences.pop(0)
self.prev_turbulences.append(abs(row[1]))
self.turbulence = sum(self.prev_turbulences) / len(
self.prev_turbulences) >= 1000
else:
self.prev_turbulences = [row[1]]
self.turbulence = abs(row[1]) > 1000
self.prev_turbulences = prev_turbulences
def read_all_sensors(): # Create I2C bus as normal i2c = busio.I2C(board.SCL, board.SDA) # Create the TCA9548A object and give it the I2C bus tca = adafruit_tca9548a.TCA9548A(i2c) # For each sensor, create it using the TCA9548A channel instead of the I2C object tsl0 = adafruit_tsl2591.TSL2591(tca[0]) tsl1 = adafruit_tsl2591.TSL2591(tca[1]) tsl2 = adafruit_tsl2591.TSL2591(tca[2]) tsl3 = adafruit_tsl2591.TSL2591(tca[3]) tsl4 = adafruit_tsl2591.TSL2591(tca[4]) tsl5 = adafruit_tsl2591.TSL2591(tca[5]) tsl6 = adafruit_tsl2591.TSL2591(tca[6]) tsl7 = adafruit_tsl2591.TSL2591(tca[7]) sensor_reading = [tsl0.lux, tsl1.lux, tsl2.lux, tsl3.lux, tsl4.lux, tsl5.lux, tsl6.lux, tsl7.lux] return sensor_reading
def __init__(self, logger, gain="med", integration_time=100):
self.emulation_mode = module_fail
self.logger = logger
self.logger.debug("Setting up light sensor object")
if self.emulation_mode:
self.emulation_values = {
"lux": 50,
"visible": 50,
"infrared": 50,
"full_spectrum": 50,
"raw_luminosity": 50
}
self.logger.debug("Running in emulation mode")
else:
self.i2c = busio.I2C(board.SCL, board.SDA)
self.sensor = adafruit_tsl2591.TSL2591(self.i2c)
self.set_gain(gain)
self.set_integration_time(integration_time)
def __init__(self):
# Initialize the I2C bus.
self.i2c = busio.I2C(board.SCL, board.SDA)
# Initialize the sensor.
self.sensor = adafruit_tsl2591.TSL2591(self.i2c)
self.sensor.enable()
self.integrationTimes = [[600, adafruit_tsl2591.INTEGRATIONTIME_600MS],
[500, adafruit_tsl2591.INTEGRATIONTIME_500MS],
[400, adafruit_tsl2591.INTEGRATIONTIME_400MS],
[300, adafruit_tsl2591.INTEGRATIONTIME_300MS],
[200, adafruit_tsl2591.INTEGRATIONTIME_200MS],
[100, adafruit_tsl2591.INTEGRATIONTIME_100MS]]
self.gains = [[1, adafruit_tsl2591.GAIN_LOW],
[16, adafruit_tsl2591.GAIN_MED],
[428, adafruit_tsl2591.GAIN_HIGH],
[9876, adafruit_tsl2591.GAIN_MAX]]
self.reps = [[0, 0], [0, 1], [0, 2], [1, 0], [1, 1], [1, 2], [2, 0],
[2, 1], [2, 2], [3, 0], [3, 1], [3, 2], [4, 0], [4, 1],
[4, 2], [5, 0], [5, 1], [5, 2]]
def get_light():
try:
i2c = busio.I2C(SCL, SDA)
sensor = adafruit_tsl2591.TSL2591(i2c)
# print('Light: {0}lux'.format(sensor.lux))
# print('Visible: {0}'.format(sensor.visible))
# print('Infrared: {0}'.format(sensor.infrared))
result = {}
result["light"] = sensor.lux
result["visible"] = sensor.visible
result["infrared"] = sensor.infrared
result["full_spectrum"] = sensor.full_spectrum
result["raw_luminosity"] = sensor.raw_luminosity
print(result)
return result
except Exception as e:
result = {}
result["light"] = 0
result["visible"] = 0
result["infrared"] = 0
result["full_spectrum"] = 0
result["raw_luminosity"] = 0
return result
import busio from PIL import Image, ImageDraw, ImageFont import adafruit_ssd1306 # Soild Sensor Imports from board import SCL, SDA import busio from adafruit_seesaw.seesaw import Seesaw # Light Sensor Imports (TSL2591) import board import adafruit_tsl2591 # Setup for Light sensor i2c_light = busio.I2C(board.SCL, board.SDA) sensor = adafruit_tsl2591.TSL2591(i2c_light) # Setup for STEMMA sensor i2c_bus = busio.I2C(SCL, SDA) ss = Seesaw(i2c_bus, addr=0x36) # Setup for OLED # Create the I2C interface. i2c = busio.I2C(SCL, SDA) # Create the SSD1306 OLED class. # The first two parameters are the pixel width and pixel height. Change these # to the right size for your display! disp = adafruit_ssd1306.SSD1306_I2C(128, 32, i2c)
if not 0x29 in tslI2C.scan():
tslI2C = busio.I2C(board.D1, board.D0)
if not 0x29 in tslI2C.scan():
_log.info("Didn't find TSL2591")
tslI2C = None
else:
_log.info("Found TSL2591 on I2C-0")
else:
_log.info("Found TSL2591 on I2C-1")
except:
_log.critical("Can't find I2C device 29 should be the Light sensor")
tslI2C = None
try:
# Initialize the sensor.
if (tslI2C is not None):
tsl = adafruit_tsl2591.TSL2591(tslI2C)
# You can optionally change the gain and integration time:
tsl.gain = adafruit_tsl2591.GAIN_LOW
tsl.integration_time = adafruit_tsl2591.INTEGRATIONTIME_100MS
else:
tsl = None
except:
_log.critical("Failed to create object for Light sensor")
tsl = None
try:
bmeI2C = busio.I2C(board.SCL, board.SDA)
if not 0x77 in bmeI2C.scan():
bmeI2C = busio.I2C(board.D1, board.D0)
if not 0x77 in bmeI2C.scan():
_log.error(
import os
import picamera
import picamera.array
import shutil
import subprocess
import sys
from fractions import Fraction
import adafruit_tsl2591
import busio
import psutil
import board
# Create object to reference the TSL2591 (Lux Sensor)
i2c = busio.I2C(board.SCL, board.SDA)
tsl = adafruit_tsl2591.TSL2591(i2c)
# Verify that the images/temp/videos folders exist
rootFolder = "/home/pi/Desktop/"
imageFolder = rootFolder + 'images'
tempFolder = rootFolder + 'temp'
videoFolder = rootFolder + 'videos'
if not os.path.isdir(imageFolder):
os.makedirs(imageFolder)
if not os.path.isdir(videoFolder):
os.makedirs(videoFolder)
# Clear out tempFolder
if os.path.isdir(tempFolder):
def run(self):
#time
a11 = 0
acd = []
m = 0
h = 0
def time_f(sec, minute, hour):
sec += 1
if (sec > 59):
minute = minute + 1
sec = 0
if (minute > 59):
hour = hour + 1
minute = 0
aaa = [sec, minute, hour]
print(hour, " ", minute, " ", sec)
return aaa
book = openpyxl.load_workbook('appending.xlsx')
sheet = book.active
#define lux sensor
i2c = busio.I2C(board.SCL, board.SDA)
sensor = adafruit_tsl2591.TSL2591(i2c)
adc_value = []
c = []
adc = Adafruit_ADS1x15.ADS1115()
GAIN = 1
def teraadc():
global w
global x
global y
GAIN = 1
a = []
temp = round(
(adc.read_adc(0, gain=GAIN) - adc.read_adc(3, gain=GAIN)) *
5.0 / (32767 * .0065), 4)
print("Temp", temp)
lcd.write_string('Temp: ' + str(temp))
temperature.put(temp)
w = list(temperature.queue)
if (temperature.full()):
temperature.get()
time.sleep(1)
lcd.clear()
volt = round(adc.read_adc(1, gain=GAIN) * 4.8 * 72.2 / 32767, 4)
print("Voltage", volt)
lcd.write_string(u'Volt: ' + str(volt))
voltage.put(volt)
x = list(voltage.queue)
if (voltage.full()):
voltage.get()
time.sleep(1)
lcd.clear()
curr = round(adc.read_adc(2, gain=GAIN) * 4.6 * 0.95 / 32767, 4)
print("Current", curr)
lcd.write_string(u'Current: ' + str(curr))
current.put(curr)
y = list(current.queue)
if (current.full()):
current.get()
time.sleep(1)
lcd.clear()
a = [temp, volt, curr]
return a
def luxsensor():
global z
lux = round(sensor.lux * 2, 4)
print("Lux", lux)
lcd.write_string(u'Lux: ' + str(lux))
luxxx.put(lux)
if (luxxx.full()):
luxxx.get()
z = list(luxxx.queue)
time.sleep(1)
lcd.clear()
return lux
dim = sheet.dimensions
c = list(dim)
k = c[-1]
t = int(k)
while (True):
print("\n")
#time
acd = time_f(a11, m, h)
a11 = acd[0]
m = acd[1]
h = acd[2]
adc_value = teraadc()
adc_value.append(luxsensor())
j = 1
for i in adc_value:
sheet.cell(row=t + 1, column=j).value = i
j = j + 1
if (j > 4):
t = t + 1
break
book.save('appending.xlsx')
# SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
# SPDX-License-Identifier: MIT
# This example shows using two TSL2491 light sensors attached to TCA9548A channels 0 and 1.
# Use with other I2C sensors would be similar.
import time
import board
import busio
import adafruit_tsl2591
import adafruit_tca9548a
# Create I2C bus as normal
i2c = busio.I2C(board.SCL, board.SDA)
# Create the TCA9548A object and give it the I2C bus
tca = adafruit_tca9548a.TCA9548A(i2c)
# For each sensor, create it using the TCA9548A channel instead of the I2C object
tsl1 = adafruit_tsl2591.TSL2591(tca[0])
tsl2 = adafruit_tsl2591.TSL2591(tca[1])
# After initial setup, can just use sensors as normal.
while True:
print(tsl1.lux, tsl2.lux)
time.sleep(0.1)
from prometheus_client import start_http_server, Gauge
from gpiozero import DiskUsage, LoadAverage, CPUTemperature
import time
import board
import busio
import adafruit_sht31d
import adafruit_tsl2591
if __name__ == '__main__':
# Start up the server to expose the metrics.
start_http_server(8000)
# Connect to I2C sensors
i2c = busio.I2C(board.SCL, board.SDA)
sht31dSensor = adafruit_sht31d.SHT31D(i2c) #Humidity / Temperature Sensor
tsl12591Sensor = adafruit_tsl2591.TSL2591(i2c) #Light Sensor
# Define guages
humidity = Gauge('grow_relative_humidity_percentage',
'Grow Tent Relative Humidity Percentage')
temp = Gauge('grow_temperature', 'Grow Tent Temperature', ['units'])
light = Gauge('grow_light', 'Grow Tent Light', ['spectrum'])
pi = Gauge('rpi', 'Raspberry Pi', ['internal_device'])
# Capture Metrics
while True:
currentTemp = sht31dSensor.temperature
temp.labels('fahrenheit').set((currentTemp * (9 / 5)) + 32)
temp.labels('celsius').set(currentTemp)
humidity.set(sht31dSensor.relative_humidity)
continue
#no change drip
if countStemma >= 5:
noData("Stemma Soil Moisture Sensor")
time.sleep(30)
if __name__ == "__main__":
conn = mariadb.connect(
user="******",
password="******",
host="localhost",
database="greenhouse"
)
cur = conn.cursor()
I2C = busio.I2C(board.SCL,board.SDA)
light = adafruit_tsl2591.TSL2591(I2C)
servo = Maestro.Controller()
dataPasser = data(70,0,0,0,0,0,0,0,[0,0,0,0,0,0])
format="%(asctime)s: %(message)s"
logging.basicConfig(format=format, level=logging.INFO, datefmt="%H:%M:%S")
w = threading.Thread(target=Interior,args=(1,))
x = threading.Thread(target=temperatureControl,args=(2,))
y = threading.Thread(target=Exterior,args=(3,))
z = threading.Thread(target=soil,args=(4,))
GPIO.setup(12,GPIO.OUT)#irrigation system
GPIO.setup(23,GPIO.OUT)#lighting system
GPIO.setup(17,GPIO.OUT)#heating system
GPIO.setup(27,GPIO.OUT)#cooling SOLENOID
GPIO.setup(22,GPIO.OUT)#cooling FAN
GPIO.setup(19,GPIO.OUT)#Vent servo
GPIO.setup(13,GPIO.OUT)#Shade servo
def __init__(self, deviceType="BME280"): #deviceType BME280 or BME680
self.deviceType = deviceType
tslI2C = None
try:
tslI2C = busio.I2C(board.SCL, board.SDA)
if not 0x29 in tslI2C.scan():
tslI2C = busio.I2C(board.D1, board.D0)
if not 0x29 in tslI2C.scan():
print("Didn't find TSL2591")
tslI2C = None
else:
print("Found TSL2591 on I2C-0")
else:
print("Found TSL2591 on I2C-1")
except:
print("Can't find I2C device 29 should be the Light sensor")
tslI2C = None
try:
# Initialize the sensor.
if (tslI2C is not None):
self.tsl = adafruit_tsl2591.TSL2591(tslI2C)
# You can optionally change the gain and integration time:
self.tsl.gain = adafruit_tsl2591.GAIN_LOW
self.tsl.integration_time = adafruit_tsl2591.INTEGRATIONTIME_100MS
else:
self.tsl = None
except:
print("Failed to create object for Light sensor")
self.tsl = None
try:
bmeI2C = busio.I2C(board.SCL, board.SDA)
if not 0x77 in bmeI2C.scan():
bmeI2C = busio.I2C(board.D1, board.D0)
if not 0x77 in bmeI2C.scan():
print(
"Can't find I2C device 77 should be the BME280/680 sensor"
)
blynk.virtual_write(250, "no BMEx80")
bmeI2C = None
else:
print(
"Found I2C device 77 should be the BME280/680 sensor on I2C-0"
)
else:
print(
"Found I2C device 77 should be the BME280/680 sensor on I2C-1"
)
except:
print("Can't find I2C device 77 should be the BME280/680 sensor")
bmeI2C = None
self.bme680 = None
self.bme280 = None
try:
# Initialize the sensor.
if (bmeI2C is not None):
if (self.deviceType == "BME680"):
print(
"Creating BME680 object for device 77 should be the BME680 sensor"
)
# self.bmex80 = adafruit_bme680.Adafruit_BME680_I2C(bmeI2C)
self.bme680 = adafruit_bme680.Adafruit_BME680_I2C(bmeI2C)
print(
"Created BME680 object for device 77 should be the BME680 sensor"
)
try:
test = self.bme680.temperature
print(
"BME680 object for device 77 tested and working OK"
)
except:
self.bme680 = None
self.bme280 = None
print(
"Failed to test object for device 77 should be the BME680 sensor"
)
else:
print(
"Creating BME280 object for device 77 should be the BME280 sensor"
)
self.bme280 = adafruit_bme280.Adafruit_BME280_I2C(bmeI2C)
print(
"Created BME280 object for device 77 should be the BME280 sensor"
)
test = self.bme280.temperature
print("BME280 object for device 77 tested and working OK")
else:
self.bme680 = None
self.bme280 = None
except:
print(
"Failed to create and test object for device 77 should be the BME280/680 sensor"
)
self.bme680 = None
self.bme280 = None
def __init__(self):
self._sensor = adafruit_tsl2591.TSL2591(i2c=busio.I2C(24, 23))
self._sensor.gain = adafruit_tsl2591.GAIN_LOW
pass
try:
gyroscope = init_gyro(busio.I2C(board.SCL, board.SDA))
sensors.append('gyroscope')
except:
pass
try:
temphum = adafruit_sht31d.SHT31D(i2c)
sensors.append('temphum')
except:
pass
try:
tsl = adafruit_tsl2591.TSL2591(i2c) # initialize
sensors.append('tsl')
except Exception as e:
print('Error initializing TSL2591')
print(e)
pass
print(sensors)
while True:
if 'accelerometer' in sensors:
data_values.append(read_accelerometer(accelerometer))
if first_pass == True:
headings.append(('accel_x', 'accel_y', 'accel_z', 'mag_x',
'mag_y', 'mag_z'))
# Sensor modules
from board import SCL, SDA
from busio import I2C
import dgs
import scd30
import sps30
import adafruit_sgp30 as sgp30
import adafruit_tsl2591 as tsl2591
import time
# creating i2c bus
i2c = I2C(SCL, SDA)
# getting the adafruit sensors
sgp = sgp30.Adafruit_SGP30(i2c)
tsl = tsl2591.TSL2591(i2c)
# getting DGS sensors
no2, _, _ = dgs.takeMeasurement("/dev/ttyUSB0")
co, _, _ = dgs.takeMeasurement("/dev/ttyUSB1")
# getting sensirion sensors
_, _, co2 = scd30.takeMasurement()
n, m = sps30.takeMasurement()
import adafruit_tsl2591
from adafruit_seesaw.seesaw import Seesaw
import RPi.GPIO as GPIO
watered = False
#SENSOR INTIALIZATION
#intit i2c
i2c_bus = busio.I2C(SCL, SDA)
#init humidity sensor dht22
DHT_SENSOR = Adafruit_DHT.DHT22
DHT_PIN = 4
#init soil sensor
ss = Seesaw(i2c_bus, addr=0x36)
#init light sensor
lightsensor = adafruit_tsl2591.TSL2591(i2c_bus)
#FIREBASE CONNECTION
firebase = firebase.FirebaseApplication(
'https://iot-garden-87415.firebaseio.com/', None)
print(firebase)
initTime = time.time()
#PLANTS WELL-BEING CONSTANT
TEMP_LOW = 12
TEMP_HIGH = 23
MOIST_LOW = 30
MOIST_HIGH = 60
LIGHT_TIME_LOW = 4
LIGHT_TIME_HIGH = 8
LUX_HIGH = 20000
# Simple demo of the TSL2591 sensor. Will print the detected light value
# every second.
import time
import board
import busio
import adafruit_tsl2591
# Initialize the I2C bus.
i2c = busio.I2C(board.SCL, board.SDA)
# Initialize the sensor.
sensor = adafruit_tsl2591.TSL2591(i2c)
# You can optionally change the gain and integration time:
# sensor.gain = adafruit_tsl2591.GAIN_LOW (1x gain)
# sensor.gain = adafruit_tsl2591.GAIN_MED (25x gain, the default)
# sensor.gain = adafruit_tsl2591.GAIN_HIGH (428x gain)
# sensor.gain = adafruit_tsl2591.GAIN_MAX (9876x gain)
# sensor.integration_time = adafruit_tsl2591.INTEGRATIONTIME_100MS (100ms, default)
# sensor.integration_time = adafruit_tsl2591.INTEGRATIONTIME_200MS (200ms)
# sensor.integration_time = adafruit_tsl2591.INTEGRATIONTIME_300MS (300ms)
# sensor.integration_time = adafruit_tsl2591.INTEGRATIONTIME_400MS (400ms)
# sensor.integration_time = adafruit_tsl2591.INTEGRATIONTIME_500MS (500ms)
# sensor.integration_time = adafruit_tsl2591.INTEGRATIONTIME_600MS (600ms)
# Read the total lux, IR, and visible light levels and print it every second.
while True:
# Read and calculate the light level in lux.
lux = sensor.lux
# plexer = Multiplex(bus)
# plexer.channel(address, 2)
from time import sleep
import board
import busio
import adafruit_tsl2591
import adafruit_tcs34725
import adafruit_tca9548a
# print(board.SCL)
i2c = busio.I2C(board.SCL, board.SDA)
tca = adafruit_tca9548a.TCA9548A(i2c)
# print(tca[0].tca.__dict__.values)
tcs = adafruit_tcs34725.TCS34725(tca[0])
tcs.gain = 60
tcs.integration_time = 100
tsl = adafruit_tsl2591.TSL2591(tca[1])
tsl.gain = adafruit_tsl2591.GAIN_LOW
tsl.integration_time = adafruit_tsl2591.INTEGRATIONTIME_100MS
while True:
print('lux: ', round(tsl.lux, 1))
print('color_raw: ', tcs.color_raw)
print('color_rgb_bytes: ', tcs.color_rgb_bytes)
# print('color_temperature:', round(tcs.color_temperature, 1))
print()
sleep(2)