class AddPrinterUI(PeachyFrame):
def initialize(self):
self.grid()
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._printer_name = StringVar()
Label(self, text = "Enter a name for your printer" ).grid(column=0,row=10)
Entry(self, textvariable = self._printer_name).grid(column=1, row=10)
Label(self).grid(column=1,row=20)
Button(self, text ="Save", command = self._save).grid(column=1,row=30, sticky=N+S+E)
Button(self,text=u"Cancel", command=self._back).grid(column=0,row=100)
self.update()
def _save(self):
printer_name = self._printer_name.get()
self._configuration_api.add_printer(printer_name)
self.navigate(SetupUI)
def _back(self):
self.navigate(SetupUI)
def close(self):
pass
class AddPrinterUI(PeachyFrame):
def initialize(self):
self.grid()
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._printer_name = StringVar()
Label(self, text="Enter a name for your printer").grid(column=0,
row=10)
Entry(self, textvariable=self._printer_name).grid(column=1, row=10)
Label(self).grid(column=1, row=20)
Button(self, text="Save", command=self._save).grid(column=1,
row=30,
sticky=N + S + E)
Button(self, text=u"Cancel", command=self._back).grid(column=0,
row=100)
self.update()
def _save(self):
printer_name = self._printer_name.get()
self._configuration_api.add_printer(printer_name)
self.navigate(SetupUI)
def _back(self):
self.navigate(SetupUI)
def close(self):
pass
class SetupUI(PeachyFrame):
def initialize(self):
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self.grid()
printer_selection_current = StringVar()
if not self._configuration_api.get_available_printers():
self._configuration_api.add_printer("Peachy Printer")
available_printers = self._configuration_api.get_available_printers()
printer_selection_current.set(available_printers[0])
self._printer_selected(available_printers[0])
printer_selection_menu = OptionMenu(
self,
printer_selection_current,
*available_printers,
command = self._printer_selected)
printer_selection_menu.grid(column=1,row=10,sticky=NSEW)
Button(self,text=u"Add Printer", command=self._add_printer).grid(column=2,row=10,sticky=NSEW)
Label(self).grid(column=0,row=15)
Button(self,text=u"Setup Audio", command=self._setup_audio).grid(column=1,row=20,sticky=NSEW)
Button(self,text=u"Setup Options", command=self._setup_options).grid(column=1,row=30,sticky=NSEW)
Button(self,text=u"Setup Drip Calibration", command=self._drip_calibration).grid(column=1,row=40,sticky=NSEW)
Button(self,text=u"Setup Calibration", command=self._calibration).grid(column=1,row=50,sticky=NSEW)
Button(self,text=u"Run Cure Test", command=self._cure_test).grid(column=1,row=60,sticky=NSEW)
Label(self).grid(column=0,row=70)
Button(self,text=u"Back", command=self._back).grid(column=0,row=100)
self.grid_columnconfigure(1,weight=1)
self.update()
def _printer_selected(self, selection):
self._configuration_api.load_printer(selection)
self._current_printer = selection
def _add_printer(self):
self.navigate(AddPrinterUI)
def _setup_options(self):
self.navigate(SetupOptionsUI, printer = self._current_printer)
def _drip_calibration(self):
self.navigate(DripCalibrationUI, printer = self._current_printer)
def _back(self):
self.navigate(MainUI, printer = self._current_printer)
def _setup_audio(self):
self.navigate(SetupAudioUI, printer = self._current_printer)
def _calibration(self):
self.navigate(CalibrationUI, printer = self._current_printer)
def _cure_test(self):
self.navigate(CureTestUI, printer = self._current_printer)
def close(self):
pass
def test_current_printer_returns_printer_name(self, mock_new, mock_save):
capi = ConfigurationAPI(ConfigurationManager())
mock_new.return_value = { 'name' : 'Spam' }
capi.add_printer('Spam')
actual = capi.current_printer()
self.assertEqual('Spam', actual)
def test_add_printer_should_save_itself(self, mock_save, mock_new):
capi = ConfigurationAPI(ConfigurationManager())
mock_new.return_value = "Some Printer Config"
capi.add_printer("NewName")
mock_new.assert_called_with("NewName")
mock_save.assert_called_with("Some Printer Config")
def test_add_printer_should_save_itself(self, mock_save, mock_new):
capi = ConfigurationAPI(ConfigurationManager())
mock_new.return_value = "Some Printer Config"
capi.add_printer("NewName")
mock_new.assert_called_with("NewName")
mock_save.assert_called_with("Some Printer Config")
def test_current_printer_returns_printer_name(self, mock_new, mock_save):
capi = ConfigurationAPI(ConfigurationManager())
name = "Spam"
config = self.default_config
config.name = name
mock_new.return_value = config
capi.add_printer('Spam')
actual = capi.current_printer()
self.assertEqual('Spam', actual)
class PrintUI(PeachyFrame):
def initialize(self):
self.grid()
self.file_opt = options = {}
options['defaultextension'] = '.gcode'
options['filetypes'] = [('GCode files', '.gcode'),('all files', '.*'), ]
options['initialdir'] = '.'
options['parent'] = self
options['title'] = 'Select file to print'
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._printer_selection_current = StringVar()
if not self._configuration_api.get_available_printers():
self._configuration_api.add_printer("Peachy Printer")
available_printers = self._configuration_api.get_available_printers()
self._printer_selection_current.set(available_printers[0])
self._printer_selected(available_printers[0])
OptionMenu(self, self._printer_selection_current, *available_printers, command = self._printer_selected).grid(column=1,row=10,sticky=N+S+E+W)
Label(self).grid(column=1,row=20)
Button(self,text=u"Verify G Code", command=self.verify_g_code_click).grid(column=1,row=25,sticky=N+S+E+W)
Button(self,text=u"Print G Code", command=self.print_g_code_click).grid(column=1,row=30,sticky=N+S+E+W)
Label(self).grid(column=1,row=40)
Button(self,text=u"Back", command=self._back).grid(column=0,row=50)
self.update()
def _printer_selected(self, selection):
self._configuration_api.load_printer(selection)
def print_g_code_click(self):
filename = tkFileDialog.askopenfile(**self.file_opt)
if filename:
self.navigate(PrintStatusUI, printer =self._printer_selection_current.get(), filename = filename, config = self._configuration_api.get_current_config(), calling_class = PrintUI)
def verify_g_code_click(self):
filename = tkFileDialog.askopenfile(**self.file_opt)
if filename:
self.navigate(VerifyStatusUI, printer =self._printer_selection_current.get(), filename = filename, config = self._configuration_api.get_current_config(), calling_class = PrintUI)
def _back(self):
self.navigate(MainUI)
def close(self):
pass
class PrintUI(PeachyFrame):
def initialize(self):
self.grid()
self.file_opt = options = {}
options['defaultextension'] = '.gcode'
options['filetypes'] = [
('GCode files', '.gcode'),
('all files', '.*'),
]
options['initialdir'] = '.'
options['parent'] = self
options['title'] = 'Select file to print'
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._printer_selection_current = StringVar()
if not self._configuration_api.get_available_printers():
self._configuration_api.add_printer("Peachy Printer")
available_printers = self._configuration_api.get_available_printers()
self._printer_selection_current.set(available_printers[0])
self._printer_selected(available_printers[0])
OptionMenu(self,
self._printer_selection_current,
*available_printers,
command=self._printer_selected).grid(column=1,
row=10,
sticky=N + S + E + W)
Label(self).grid(column=1, row=20)
Button(self, text=u"Verify G Code",
command=self.verify_g_code_click).grid(column=1,
row=25,
sticky=N + S + E + W)
Button(self, text=u"Print G Code",
command=self.print_g_code_click).grid(column=1,
row=30,
sticky=N + S + E + W)
Label(self).grid(column=1, row=40)
Button(self, text=u"Back", command=self._back).grid(column=0, row=50)
self.update()
def _printer_selected(self, selection):
self._configuration_api.load_printer(selection)
def print_g_code_click(self):
filename = tkFileDialog.askopenfile(**self.file_opt)
if filename:
self.navigate(PrintStatusUI,
printer=self._printer_selection_current.get(),
filename=filename,
config=self._configuration_api.get_current_config(),
calling_class=PrintUI)
def verify_g_code_click(self):
filename = tkFileDialog.askopenfile(**self.file_opt)
if filename:
self.navigate(VerifyStatusUI,
printer=self._printer_selection_current.get(),
filename=filename,
config=self._configuration_api.get_current_config(),
calling_class=PrintUI)
def _back(self):
self.navigate(MainUI)
def close(self):
pass
class SetupUI(PeachyFrame):
def initialize(self):
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self.grid()
printer_selection_current = StringVar()
if not self._configuration_api.get_available_printers():
self._configuration_api.add_printer("Peachy Printer")
available_printers = self._configuration_api.get_available_printers()
printer_selection_current.set(available_printers[0])
self._printer_selected(available_printers[0])
printer_selection_menu = OptionMenu(self,
printer_selection_current,
*available_printers,
command=self._printer_selected)
printer_selection_menu.grid(column=1, row=10, sticky=NSEW)
Button(self, text=u"Add Printer",
command=self._add_printer).grid(column=2, row=10, sticky=NSEW)
Label(self).grid(column=0, row=15)
Button(self, text=u"Setup Audio",
command=self._setup_audio).grid(column=1, row=20, sticky=NSEW)
Button(self, text=u"Setup Options",
command=self._setup_options).grid(column=1, row=30, sticky=NSEW)
Button(self,
text=u"Setup Drip Calibration",
command=self._drip_calibration).grid(column=1,
row=40,
sticky=NSEW)
Button(self, text=u"Setup Calibration",
command=self._calibration).grid(column=1, row=50, sticky=NSEW)
Button(self, text=u"Run Cure Test",
command=self._cure_test).grid(column=1, row=60, sticky=NSEW)
Button(self,
text=u"Delete Selected Printer",
command=self._Delete_Config).grid(column=1, row=90, sticky=NSEW)
Label(self).grid(column=0, row=70)
Button(self, text=u"Back", command=self._back).grid(column=0, row=100)
self.grid_columnconfigure(1, weight=1)
self.update()
def _printer_selected(self, selection):
self._configuration_api.load_printer(selection)
self._current_printer = selection
def _add_printer(self):
self.navigate(AddPrinterUI)
def _Delete_Config(self):
self.navigate(DeleteSelectedConfig, printer=self._current_printer)
def _setup_options(self):
self.navigate(SetupOptionsUI, printer=self._current_printer)
def _drip_calibration(self):
self.navigate(DripCalibrationUI, printer=self._current_printer)
def _back(self):
self.navigate(MainUI, printer=self._current_printer)
def _setup_audio(self):
self.navigate(SetupAudioUI, printer=self._current_printer)
def _calibration(self):
self.navigate(CalibrationUI, printer=self._current_printer)
def _cure_test(self):
self.navigate(CureTestUI, printer=self._current_printer)
def close(self):
pass
