def run_example(with_plots=True):
"""
This is the same example from the Sundials package (idasRoberts_FSA_dns.c)
This simple example problem for IDA, due to Robertson,
is from chemical kinetics, and consists of the following three
equations::
dy1/dt = -p1*y1 + p2*y2*y3
dy2/dt = p1*y1 - p2*y2*y3 - p3*y2**2
0 = y1 + y2 + y3 - 1
"""
def f(t, y, yd, p):
res1 = -p[0]*y[0]+p[1]*y[1]*y[2]-yd[0]
res2 = p[0]*y[0]-p[1]*y[1]*y[2]-p[2]*y[1]**2-yd[1]
res3 = y[0]+y[1]+y[2]-1
return N.array([res1,res2,res3])
#The initial conditons
y0 = [1.0, 0.0, 0.0] #Initial conditions for y
yd0 = [0.1, 0.0, 0.0] #Initial conditions for dy/dt
p0 = [0.040, 1.0e4, 3.0e7] #Initial conditions for parameters
#Create an Assimulo implicit problem
imp_mod = Implicit_Problem(f, y0, yd0,p0=p0)
#Create an Assimulo implicit solver (IDA)
imp_sim = IDA(imp_mod) #Create a IDA solver
#Sets the paramters
imp_sim.atol = N.array([1.0e-8, 1.0e-14, 1.0e-6])
imp_sim.algvar = [1.0,1.0,0.0]
imp_sim.suppress_alg = False #Suppres the algebraic variables on the error test
imp_sim.continuous_output = True #Store data continuous during the simulation
imp_sim.pbar = p0
imp_sim.suppress_sens = False #Dont suppress the sensitivity variables in the error test.
#Let Sundials find consistent initial conditions by use of 'IDA_YA_YDP_INIT'
imp_sim.make_consistent('IDA_YA_YDP_INIT')
#Simulate
t, y, yd = imp_sim.simulate(4,400) #Simulate 4 seconds with 400 communication points
print imp_sim.p_sol[0][-1] , imp_sim.p_sol[1][-1], imp_sim.p_sol[0][-1]
#Basic test
nose.tools.assert_almost_equal(y[-1][0], 9.05518032e-01, 4)
nose.tools.assert_almost_equal(y[-1][1], 2.24046805e-05, 4)
nose.tools.assert_almost_equal(y[-1][2], 9.44595637e-02, 4)
nose.tools.assert_almost_equal(imp_sim.p_sol[0][-1][0], -1.8761, 2) #Values taken from the example in Sundials
nose.tools.assert_almost_equal(imp_sim.p_sol[1][-1][0], 2.9614e-06, 8)
nose.tools.assert_almost_equal(imp_sim.p_sol[2][-1][0], -4.9334e-10, 12)
#Plot
if with_plots:
P.plot(t,y)
P.show()
def run_example(with_plots=True):
"""
This is the same example from the Sundials package (idasRoberts_FSA_dns.c)
This simple example problem for IDA, due to Robertson,
is from chemical kinetics, and consists of the following three
equations::
dy1/dt = -p1*y1 + p2*y2*y3
dy2/dt = p1*y1 - p2*y2*y3 - p3*y2**2
0 = y1 + y2 + y3 - 1
"""
def f(t, y, yd, p):
res1 = -p[0] * y[0] + p[1] * y[1] * y[2] - yd[0]
res2 = p[0] * y[0] - p[1] * y[1] * y[2] - p[2] * y[1]**2 - yd[1]
res3 = y[0] + y[1] + y[2] - 1
return N.array([res1, res2, res3])
#The initial conditons
y0 = [1.0, 0.0, 0.0] #Initial conditions for y
yd0 = [0.1, 0.0, 0.0] #Initial conditions for dy/dt
p0 = [0.040, 1.0e4, 3.0e7] #Initial conditions for parameters
#Create an Assimulo implicit problem
imp_mod = Implicit_Problem(f, y0, yd0, p0=p0)
#Create an Assimulo implicit solver (IDA)
imp_sim = IDA(imp_mod) #Create a IDA solver
#Sets the paramters
imp_sim.atol = N.array([1.0e-8, 1.0e-14, 1.0e-6])
imp_sim.algvar = [1.0, 1.0, 0.0]
imp_sim.suppress_alg = False #Suppres the algebraic variables on the error test
imp_sim.continuous_output = True #Store data continuous during the simulation
imp_sim.pbar = p0
imp_sim.suppress_sens = False #Dont suppress the sensitivity variables in the error test.
#Let Sundials find consistent initial conditions by use of 'IDA_YA_YDP_INIT'
imp_sim.make_consistent('IDA_YA_YDP_INIT')
#Simulate
t, y, yd = imp_sim.simulate(
4, 400) #Simulate 4 seconds with 400 communication points
print imp_sim.p_sol[0][-1], imp_sim.p_sol[1][-1], imp_sim.p_sol[0][-1]
#Basic test
nose.tools.assert_almost_equal(y[-1][0], 9.05518032e-01, 4)
nose.tools.assert_almost_equal(y[-1][1], 2.24046805e-05, 4)
nose.tools.assert_almost_equal(y[-1][2], 9.44595637e-02, 4)
nose.tools.assert_almost_equal(
imp_sim.p_sol[0][-1][0], -1.8761,
2) #Values taken from the example in Sundials
nose.tools.assert_almost_equal(imp_sim.p_sol[1][-1][0], 2.9614e-06, 8)
nose.tools.assert_almost_equal(imp_sim.p_sol[2][-1][0], -4.9334e-10, 12)
#Plot
if with_plots:
P.plot(t, y)
P.show()
def run_example(with_plots=True):
"""
This example show how to use Assimulo and IDA for simulating sensitivities
for initial conditions.::
0 = dy1/dt - -(k01+k21+k31)*y1 - k12*y2 - k13*y3 - b1
0 = dy2/dt - k21*y1 + (k02+k12)*y2
0 = dy3/dt - k31*y1 + k13*y3
y1(0) = p1, y2(0) = p2, y3(0) = p3
p1=p2=p3 = 0
See http://sundials.2283335.n4.nabble.com/Forward-sensitivities-for-initial-conditions-td3239724.html
"""
def f(t, y, yd,p):
y1,y2,y3 = y
yd1,yd2,yd3 = yd
k01 = 0.0211
k02 = 0.0162
k21 = 0.0111
k12 = 0.0124
k31 = 0.0039
k13 = 0.000035
b1 = 49.3
res_0 = -yd1 -(k01+k21+k31)*y1+k12*y2+k13*y3+b1
res_1 = -yd2 + k21*y1-(k02+k12)*y2
res_2 = -yd3 + k31*y1-k13*y3
return N.array([res_0,res_1,res_2])
#The initial conditions
y0 = [0.0,0.0,0.0] #Initial conditions for y
yd0 = [49.3,0.,0.]
p0 = [0.0, 0.0, 0.0] #Initial conditions for parameters
yS0 = N.array([[1,0,0],[0,1,0],[0,0,1.]])
#Create an Assimulo implicit problem
imp_mod = Implicit_Problem(f,y0,yd0,p0=p0)
#Sets the options to the problem
imp_mod.yS0=yS0
#Create an Assimulo explicit solver (IDA)
imp_sim = IDA(imp_mod)
#Sets the paramters
imp_sim.rtol = 1e-7
imp_sim.atol = 1e-6
imp_sim.pbar = [1,1,1] #pbar is used to estimate the tolerances for the parameters
imp_sim.continuous_output = True #Need to be able to store the result using the interpolate methods
imp_sim.sensmethod = 'SIMULTANEOUS' #Defines the sensitvity method used
imp_sim.suppress_sens = False #Dont suppress the sensitivity variables in the error test.
#Simulate
t, y, yd = imp_sim.simulate(400) #Simulate 400 seconds
#Basic test
nose.tools.assert_almost_equal(y[-1][0], 1577.6552477,3)
nose.tools.assert_almost_equal(y[-1][1], 611.9574565, 3)
nose.tools.assert_almost_equal(y[-1][2], 2215.88563217, 3)
nose.tools.assert_almost_equal(imp_sim.p_sol[0][1][0], 1.0)
#Plot
if with_plots:
P.figure(1)
P.subplot(221)
P.plot(t, N.array(imp_sim.p_sol[0])[:,0],
t, N.array(imp_sim.p_sol[0])[:,1],
t, N.array(imp_sim.p_sol[0])[:,2])
P.title("Parameter p1")
P.legend(("p1/dy1","p1/dy2","p1/dy3"))
P.subplot(222)
P.plot(t, N.array(imp_sim.p_sol[1])[:,0],
t, N.array(imp_sim.p_sol[1])[:,1],
t, N.array(imp_sim.p_sol[1])[:,2])
P.title("Parameter p2")
P.legend(("p2/dy1","p2/dy2","p2/dy3"))
P.subplot(223)
P.plot(t, N.array(imp_sim.p_sol[2])[:,0],
t, N.array(imp_sim.p_sol[2])[:,1],
t, N.array(imp_sim.p_sol[2])[:,2])
P.title("Parameter p3")
P.legend(("p3/dy1","p3/dy2","p3/dy3"))
P.subplot(224)
P.plot(t,y)
P.show()
def run_example(with_plots=True):
"""
This example show how to use Assimulo and IDA for simulating sensitivities
for initial conditions.::
0 = dy1/dt - -(k01+k21+k31)*y1 - k12*y2 - k13*y3 - b1
0 = dy2/dt - k21*y1 + (k02+k12)*y2
0 = dy3/dt - k31*y1 + k13*y3
y1(0) = p1, y2(0) = p2, y3(0) = p3
p1=p2=p3 = 0
See http://sundials.2283335.n4.nabble.com/Forward-sensitivities-for-initial-conditions-td3239724.html
"""
def f(t, y, yd, p):
y1, y2, y3 = y
yd1, yd2, yd3 = yd
k01 = 0.0211
k02 = 0.0162
k21 = 0.0111
k12 = 0.0124
k31 = 0.0039
k13 = 0.000035
b1 = 49.3
res_0 = -yd1 - (k01 + k21 + k31) * y1 + k12 * y2 + k13 * y3 + b1
res_1 = -yd2 + k21 * y1 - (k02 + k12) * y2
res_2 = -yd3 + k31 * y1 - k13 * y3
return N.array([res_0, res_1, res_2])
#The initial conditions
y0 = [0.0, 0.0, 0.0] #Initial conditions for y
yd0 = [49.3, 0., 0.]
p0 = [0.0, 0.0, 0.0] #Initial conditions for parameters
yS0 = N.array([[1, 0, 0], [0, 1, 0], [0, 0, 1.]])
#Create an Assimulo implicit problem
imp_mod = Implicit_Problem(f, y0, yd0, p0=p0)
#Sets the options to the problem
imp_mod.yS0 = yS0
#Create an Assimulo explicit solver (IDA)
imp_sim = IDA(imp_mod)
#Sets the paramters
imp_sim.rtol = 1e-7
imp_sim.atol = 1e-6
imp_sim.pbar = [
1, 1, 1
] #pbar is used to estimate the tolerances for the parameters
imp_sim.continuous_output = True #Need to be able to store the result using the interpolate methods
imp_sim.sensmethod = 'SIMULTANEOUS' #Defines the sensitvity method used
imp_sim.suppress_sens = False #Dont suppress the sensitivity variables in the error test.
#Simulate
t, y, yd = imp_sim.simulate(400) #Simulate 400 seconds
#Basic test
nose.tools.assert_almost_equal(y[-1][0], 1577.6552477, 3)
nose.tools.assert_almost_equal(y[-1][1], 611.9574565, 3)
nose.tools.assert_almost_equal(y[-1][2], 2215.88563217, 3)
nose.tools.assert_almost_equal(imp_sim.p_sol[0][1][0], 1.0)
#Plot
if with_plots:
P.figure(1)
P.subplot(221)
P.plot(t,
N.array(imp_sim.p_sol[0])[:, 0], t,
N.array(imp_sim.p_sol[0])[:, 1], t,
N.array(imp_sim.p_sol[0])[:, 2])
P.title("Parameter p1")
P.legend(("p1/dy1", "p1/dy2", "p1/dy3"))
P.subplot(222)
P.plot(t,
N.array(imp_sim.p_sol[1])[:, 0], t,
N.array(imp_sim.p_sol[1])[:, 1], t,
N.array(imp_sim.p_sol[1])[:, 2])
P.title("Parameter p2")
P.legend(("p2/dy1", "p2/dy2", "p2/dy3"))
P.subplot(223)
P.plot(t,
N.array(imp_sim.p_sol[2])[:, 0], t,
N.array(imp_sim.p_sol[2])[:, 1], t,
N.array(imp_sim.p_sol[2])[:, 2])
P.title("Parameter p3")
P.legend(("p3/dy1", "p3/dy2", "p3/dy3"))
P.subplot(224)
P.plot(t, y)
P.show()
