class SwitchingAWG(Procedure):
"""Simple square pulse switching, to and fro, using only AWG pulses."""
# Parameters
attempt_number = IntParameter("Switching attempts", default=1024, abstract=True)
field_setpoint = FloatParameter("Field Setpoint", unit="G")
pulse_voltage = FloatParameter("Pulse Amplitude", unit="V")
pulse_duration = FloatParameter("Pulse Duration", unit="s")
# Instrument resources
bop = BOP2020M("GPIB0::1::INSTR")
lock = SR865("USB0::0xB506::0x2000::002638::INSTR")
hp = HallProbe("calibration/HallProbe.cal", lock.set_ao1, lock.get_ai1)
mag = Electromagnet('calibration/GMW.cal', hp.get_field, bop.set_current, bop.get_current)
pspl = Picosecond10070A("GPIB0::24::INSTR")
# Quantities
field = Quantity("Field", unit="G")
# Traces
raw_trace = Trace("P")
# Filters
clusterer = Clusterer(input=raw_trace)
probability = CollapseProbability(input=clusterer)
def init_instruments(self):
# AWG Initialization
arb.set_output(True, channel=1)
arb.set_output(False, channel=2)
arb.sample_freq = 12.0e9
arb.waveform_output_mode = "WSPEED"
arb.abort()
arb.delete_all_waveforms()
arb.reset_sequence_table()
arb.set_output_route("DC", channel=1)
arb.voltage_amplitude = 1.0
arb.set_marker_level_low(0.0, channel=1, marker_type="sync")
arb.set_marker_level_high(1.5, channel=1, marker_type="sync")
arb.continuous_mode = False
arb.gate_mode = False
arb.sequence_mode = "SCENARIO"
arb.scenario_advance_mode = "SINGLE"
class MeasureLockinVoltage(Procedure):
set_field = FloatParameter(name="Set Field", unit="G")
field = Quantity(name="Field", unit="G")
voltage = Quantity(name="Magnitude", unit="V")
bop = BOP2020M("GPIB0::1::INSTR")
lock = SR830("GPIB0::9::INSTR")
hp = HallProbe("calibration/HallProbe.cal", lock.set_ao1, lock.get_ai1)
mag = Electromagnet('calibration/GMW.cal', hp.get_field, bop.set_current,
bop.get_current)
def init_instruments(self):
self.tc_delay = self.lock.measure_delay()
self.averages = 10
def lockin_measure():
time.sleep(self.tc_delay)
vals = []
for i in range(self.averages):
vals.append(self.lock.r)
return np.mean(vals)
self.set_field.assign_method(self.mag.set_field)
self.field.assign_method(self.mag.get_field)
self.voltage.assign_method(lockin_measure)
for param in self._parameters:
self._parameters[param].push()
def run(self):
"""This is run for each step in a sweep."""
for param in self._parameters:
self._parameters[param].push()
for quant in self._quantities:
self._quantities[quant].measure()
logging.info("Field, Lockin Magnitude: {:f}, {:g}".format(
self.field.value, self.voltage.value))
def shutdown_instruments(self):
self.bop.current = 0.0
pulse_points = int(duration*sample_rate)
if pulse_points < 320:
wf = np.zeros(320)
else:
wf = np.zeros(64*np.ceil(pulse_points/64.0))
wf[:pulse_points] = amplitude
return wf
if __name__ == '__main__':
arb = KeysightM8190A("192.168.5.108")
# lock = SR830("GPIB0::9::INSTR")
lock = SR865("USB0::0xB506::0x2000::002638::INSTR")
bop = BOP2020M("GPIB0::1::INSTR")
hp = HallProbe("calibration/HallProbe.cal", lock.set_ao1, lock.get_ai1)
mag = Electromagnet('calibration/GMW.cal', hp.get_field, bop.set_current, bop.get_current)
print(arb.interface.query("*IDN?"))
# arb.interface.write("*RST")
# time.sleep(2)
# arb.interface.query("*OPC?")
arb.set_output(True, channel=1)
arb.set_output(False, channel=2)
arb.sample_freq = 12.0e9
arb.waveform_output_mode = "WSPEED"
arb.abort()
arb.delete_all_waveforms()
arb.reset_sequence_table()
class SwitchingPSPL(Procedure):
# instrument_settings = {"lock":{"amp":0.1, "freq":167}}
# These don't correspond to actual instrument parameters, and are thus "abstract"
attempt_number = IntParameter("Switching Attempt Index", abstract=True)
middle_voltage = FloatParameter("Middle Voltage Value", unit="V", abstract = True)
high_probability_duration = FloatParameter("High Probability Duration", unit="s", abstract=True)
initialization_probability = FloatParameter("Initialization Probability", default=1.0, abstract=True)
resistance_averages = IntParameter("Resistance Averages", default=2, abstract=True)
# These do correspond to instrument parameters
field_setpoint = FloatParameter("Field Setpoint", unit="G")
pulse_voltage = FloatParameter("Pulse Amplitude", unit="V")
pulse_duration = FloatParameter("Pulse Duration", unit="s")
# Quantities to be measured
field = Quantity("Field", unit="G")
initial_state = Quantity("Initial Voltage", unit="V")
final_state = Quantity("Final Voltage", unit="V")
# Instrument resources
bop = BOP2020M("Kepco Power Supply", "GPIB1::1::INSTR")
lock = SR830("Lockin Amplifier", "GPIB1::9::INSTR")
hp = HallProbe("calibration/HallProbe.cal", lock.set_ao1, lock.get_ai1)
mag = Electromagnet('calibration/GMW.cal', hp.get_field, bop.set_current, bop.get_current)
pspl = Picosecond10070A("Pulse Generator", "GPIB1::24::INSTR")
def init_instruments(self):
self.tc_delay = self.lock.measure_delay()
self.pspl.output = True
def lockin_measure_initial():
if np.random.random() <= self.initialization_probability.value:
self.pspl.duration = self.high_probability_duration.value
time.sleep(0.09) # Required to let the duration settle
self.pspl.trigger()
self.pspl.duration = self.pulse_duration.value
time.sleep(0.09) # Required to let the duration settle
time.sleep(self.tc_delay)
return np.mean( [self.lock.r for i in range(self.resistance_averages.value)] )
def lockin_measure_final():
self.pspl.trigger()
time.sleep(self.tc_delay)
return np.mean( [self.lock.r for i in range(self.resistance_averages.value)] )
# Associate quantities and parameters with their respective methods
self.field_setpoint.assign_method(lambda x: setattr(self.mag, 'field', x))
self.field.assign_method(lambda : getattr(self.mag, 'field'))
self.initial_state.assign_method(lockin_measure_initial)
self.final_state.assign_method(lockin_measure_final)
self.pulse_voltage.assign_method(self.pspl.set_amplitude)
self.pulse_duration.assign_method(self.pspl.set_duration)
def find_reset_duration():
# Search over pulse durations for highest probability reversal
logging.warning("Finding optimal duration for this pulse amplitude...")
num_pulses = 40
durs = np.linspace(0.15e-9, 1.0e-9, 10)
probs = []
for dur in durs:
self.pspl.duration = dur
ivs = []
fvs = []
for i in range(num_pulses):
time.sleep(self.tc_delay)
v_initial = np.mean( [self.lock.r for i in range(self.resistance_averages.value)] )
ivs.append(v_initial)
self.pspl.trigger()
time.sleep(self.tc_delay)
v_final = np.mean( [self.lock.r for i in range(self.resistance_averages.value)] )
fvs.append(v_final)
ivs = np.array(ivs)
fvs = np.array(fvs)
initial_states = (ivs-self.middle_voltage.value) > 0.0
final_states = (fvs-self.middle_voltage.value) > 0.0
switched = np.logical_xor(initial_states, final_states)
num_attempts_APtoP = np.sum(initial_states > 0)
num_attempts_PtoAP = np.sum(initial_states == 0)
switched_APtoP = np.sum( np.logical_and(switched, initial_states) )
switched_PtoAP = np.sum( np.logical_and(switched, np.logical_not(initial_states)) )
if num_attempts_APtoP == 0:
prob_APtoP = 0.0
else:
prob_APtoP = switched_APtoP/num_attempts_APtoP
if num_attempts_PtoAP == 0:
prob_PtoAP = 0.0
else:
prob_PtoAP = switched_PtoAP/num_attempts_PtoAP
probs.append(0.5*(prob_PtoAP + prob_APtoP))
logging.warning("Found probability {:f} for duration {:g}".format(probs[-1], dur))
# Set the reset duration to the best available average probability
self.high_probability_duration.value = durs[np.argmax(probs)]
self.initialization_probability.value = 0.5/np.max(probs)
logging.warning("Best probability {:f}".format(self.initialization_probability.value))
logging.warning("Selected duration {:g}".format(self.high_probability_duration.value))
# Reset the PSPL to the original duration
self.pspl.duration = self.pulse_duration.value
self.pulse_voltage.add_post_push_hook(find_reset_duration)
for param in self._parameters:
logging.warning("Pushing parameter {:s}".format(self._parameters[param].name))
self._parameters[param].push()
def shutdown_instruments(self):
self.bop.current = 0.0
self.pspl.output = False
def run(self):
self.initial_state.measure()
self.final_state.measure()