def send_position_goal(stateRefPub, position):
stateRef = NavSts()
stateRef.header.seq = 0
stateRef.header.stamp.secs = 0
stateRef.header.stamp.nsecs = 0
stateRef.global_position.latitude = 0.0
stateRef.global_position.longitude = 0.0
stateRef.origin.latitude = 0.0
stateRef.origin.longitude = 0.0
stateRef.position.north = position.north
stateRef.position.east = position.east
stateRef.position.depth = position.depth
stateRef.altitude = 0.0
stateRef.body_velocity.x = 0
stateRef.body_velocity.y = 0
stateRef.body_velocity.z = 0
stateRef.gbody_velocity.x = 0
stateRef.gbody_velocity.y = 0
stateRef.gbody_velocity.z = 0
stateRef.orientation.roll = 0
stateRef.orientation.pitch = 0
stateRef.orientation.yaw = 0
stateRef.orientation_rate.roll = 0
stateRef.orientation_rate.pitch = 0
stateRef.orientation_rate.yaw = 0
stateRef.position_variance.north = 0
stateRef.position_variance.east = 0
stateRef.position_variance.depth = 0
stateRef.orientation_variance.roll = 0
stateRef.orientation_variance.pitch = 0
stateRef.orientation_variance.yaw = 0
stateRef.status = 0
send_state_ref(stateRefPub, stateRef)
def send_position_goal(stateRefPub, position):
stateRef = NavSts()
stateRef.header.seq = 0
stateRef.header.stamp.secs = 0
stateRef.header.stamp.nsecs = 0
stateRef.global_position.latitude = 0.0
stateRef.global_position.longitude = 0.0
stateRef.origin.latitude = 0.0
stateRef.origin.longitude = 0.0
stateRef.position.north = position.north
stateRef.position.east = position.east
stateRef.position.depth = position.depth
stateRef.altitude = 0.0
stateRef.body_velocity.x = 0
stateRef.body_velocity.y = 0
stateRef.body_velocity.z = 0
stateRef.gbody_velocity.x = 0
stateRef.gbody_velocity.y = 0
stateRef.gbody_velocity.z = 0
stateRef.orientation.roll = 0
stateRef.orientation.pitch = 0
stateRef.orientation.yaw = 0
stateRef.orientation_rate.roll = 0
stateRef.orientation_rate.pitch = 0
stateRef.orientation_rate.yaw = 0
stateRef.position_variance.north = 0
stateRef.position_variance.east = 0
stateRef.position_variance.depth = 0
stateRef.orientation_variance.roll = 0
stateRef.orientation_variance.pitch = 0
stateRef.orientation_variance.yaw = 0
stateRef.status = 0
send_state_ref(stateRefPub, stateRef)
def send_depth_goal(stateRefPub, position):
try:
depth_enable = rospy.ServiceProxy('DEPTH_enable', EnableControl)
depth_enable(enable=True)
velcon_enable = rospy.ServiceProxy('VelCon_enable', EnableControl)
velcon_enable(enable=True)
config_vel_controller = rospy.ServiceProxy(
'ConfigureVelocityController', ConfigureVelocityController)
config_vel_controller(ControllerName="DEPTH",
desired_mode=[0, 0, 2, 0, 0, 0])
stateRef = NavSts()
stateRef.header.seq = 0
stateRef.header.stamp.secs = 0
stateRef.header.stamp.nsecs = 0
stateRef.global_position.latitude = 0.0
stateRef.global_position.longitude = 0.0
stateRef.origin.latitude = 0.0
stateRef.origin.longitude = 0.0
stateRef.position.north = position.north
stateRef.position.east = position.east
stateRef.position.depth = position.depth
stateRef.altitude = 0.0
stateRef.body_velocity.x = 0
stateRef.body_velocity.y = 0
stateRef.body_velocity.z = 0
stateRef.gbody_velocity.x = 0
stateRef.gbody_velocity.y = 0
stateRef.gbody_velocity.z = 0
stateRef.orientation.roll = 0
stateRef.orientation.pitch = 0
stateRef.orientation.yaw = 0
stateRef.orientation_rate.roll = 0
stateRef.orientation_rate.pitch = 0
stateRef.orientation_rate.yaw = 0
stateRef.position_variance.north = 0
stateRef.position_variance.east = 0
stateRef.position_variance.depth = 0
stateRef.orientation_variance.roll = 0
stateRef.orientation_variance.pitch = 0
stateRef.orientation_variance.yaw = 0
stateRef.status = 0
stateRefPub.publish(stateRef)
return 0
except rospy.ServiceException, e:
rospy.logerr("Failed to call change depth action" % e)
return -1
def send_depth_goal(stateRefPub, position):
try:
depth_enable = rospy.ServiceProxy('DEPTH_enable', EnableControl)
depth_enable(enable=True)
velcon_enable = rospy.ServiceProxy('VelCon_enable', EnableControl)
velcon_enable(enable=True)
config_vel_controller = rospy.ServiceProxy('ConfigureVelocityController', ConfigureVelocityController)
config_vel_controller(ControllerName="DEPTH", desired_mode=[0, 0, 2, 0, 0, 0])
stateRef = NavSts()
stateRef.header.seq = 0
stateRef.header.stamp.secs = 0
stateRef.header.stamp.nsecs = 0
stateRef.global_position.latitude = 0.0
stateRef.global_position.longitude = 0.0
stateRef.origin.latitude = 0.0
stateRef.origin.longitude = 0.0
stateRef.position.north = position.north
stateRef.position.east = position.east
stateRef.position.depth = position.depth
stateRef.altitude = 0.0
stateRef.body_velocity.x = 0
stateRef.body_velocity.y = 0
stateRef.body_velocity.z = 0
stateRef.gbody_velocity.x = 0
stateRef.gbody_velocity.y = 0
stateRef.gbody_velocity.z = 0
stateRef.orientation.roll = 0
stateRef.orientation.pitch = 0
stateRef.orientation.yaw = 0
stateRef.orientation_rate.roll = 0
stateRef.orientation_rate.pitch = 0
stateRef.orientation_rate.yaw = 0
stateRef.position_variance.north = 0
stateRef.position_variance.east = 0
stateRef.position_variance.depth = 0
stateRef.orientation_variance.roll = 0
stateRef.orientation_variance.pitch = 0
stateRef.orientation_variance.yaw = 0
stateRef.status = 0
stateRefPub.publish(stateRef)
return 0
except rospy.ServiceException, e:
rospy.logerr("Failed to call change depth action" % e)
return -1
def __init__(self):
# position
self.position = Point(0, 0, 0)
rospy.Subscriber('position', NavSts, self.position_cb)
# state reference publisher
self.stateRefPub = rospy.Publisher('stateRef', NavSts, queue_size=1)
self.action_rec_flag = 0 # 0 - waiting action, 1 - received action, 2 - executing action
self.as_goal = aPadGoal()
self.as_res = aPadResult()
self.as_feed = aPadFeedback()
# TODO create 4 docking stations -- 4 offset positions for every station + before docking, align the object to station
self.position_offset = Point(-0.5, -0.5,
0) # for docking -- object offset
self.pos_old = Point(self.position.x, self.position.y, self.position.z)
self.pos_err = []
self.perched_flag = 0 # flag for dummy action perching onto aMussel/aFish/other objects action
self.perched_count = 0 # number of currently docked objects (default max 4)
# initialize actions server structures
self.action_server = actionlib.SimpleActionServer("action_server",
aPadAction,
auto_start=False)
self.action_server.register_goal_callback(self.action_execute_cb)
self.action_server.register_preempt_callback(self.action_preempt_cb)
self.action_server.start()
while not rospy.is_shutdown():
# goal position for aMussel/aFish/object docked onto aPad (if perched!)
#TODO multiple docking stations
goalPosition = NED()
goalPosition.north = self.position.x + self.position_offset.x
goalPosition.east = self.position.y + self.position_offset.y
#goalPosition.z = self.position.z + self.position_offset.z
if self.perched_flag == 1:
self.set_model_state(goalPosition)
if self.action_server.is_active():
###################
# received action #
###################
if self.action_rec_flag == 1:
if self.as_goal.id == 0:
print 'Go to position action' # 2d movement
self.pos_old = Point(self.position.x, self.position.y,
0)
start = Vector3(self.position.x, self.position.y, 0)
end = Vector3(self.as_goal.pose.position.x,
self.as_goal.pose.position.y, 0)
dl = sqrt(
pow(self.as_goal.pose.position.x -
self.position.x, 2) +
pow(self.as_goal.pose.position.y -
self.position.y, 2))
# if within 10cm of goal
if dl < 0.1:
self.action_rec_flag = 0 # waiting for new action
self.as_res.status = 0
self.pos_err = []
print 'finished executing go_to_position action'
print "###"
print self.position
print "###"
self.action_server.set_succeeded(self.as_res)
else:
try:
# send goal
fadp_enable = rospy.ServiceProxy(
'FADP_enable', EnableControl)
fadp_enable(enable=True)
config_vel_controller = rospy.ServiceProxy(
'ConfigureVelocityController',
ConfigureVelocityController)
config_vel_controller(
ControllerName="FADP",
desired_mode=[2, 2, 0, 0, 0, 0])
velcon_enable = rospy.ServiceProxy(
'VelCon_enable', EnableControl)
velcon_enable(enable=True)
stateRef = NavSts()
stateRef.header.seq = 0
stateRef.header.stamp.secs = 0
stateRef.header.stamp.nsecs = 0
stateRef.global_position.latitude = 0.0
stateRef.global_position.longitude = 0.0
stateRef.origin.latitude = 0.0
stateRef.origin.longitude = 0.0
stateRef.position.north = self.as_goal.pose.position.x
stateRef.position.east = self.as_goal.pose.position.y
stateRef.position.depth = 0
stateRef.altitude = 0.0
stateRef.body_velocity.x = 0
stateRef.body_velocity.y = 0
stateRef.body_velocity.z = 0
stateRef.gbody_velocity.x = 0
stateRef.gbody_velocity.y = 0
stateRef.gbody_velocity.z = 0
stateRef.orientation.roll = 0
stateRef.orientation.pitch = 0
stateRef.orientation.yaw = 0
stateRef.orientation_rate.roll = 0
stateRef.orientation_rate.pitch = 0
stateRef.orientation_rate.yaw = 0
stateRef.position_variance.north = 0
stateRef.position_variance.east = 0
stateRef.position_variance.depth = 0
stateRef.orientation_variance.roll = 0
stateRef.orientation_variance.pitch = 0
stateRef.orientation_variance.yaw = 0
stateRef.status = 0
self.stateRefPub.publish(stateRef)
self.action_rec_flag = 2 #executing trajectory
except rospy.ServiceException, e:
print "Service for activating controller failed: %s" % e
self.as_res.status = -1
self.action_server.set_aborted(self.as_res)
self.action_rec_flag = 0 # waiting for new actions
elif self.as_goal.id == 1:
print 'perch action'
self.action_rec_flag = 2 # start executing action
elif self.as_goal.id == 2:
print 'release action'
self.action_rec_flag = 2 # start executing action
####################
# executing action #
####################
elif self.action_rec_flag == 2:
self.as_res.id = self.as_goal.id
self.as_feed.id = self.as_goal.id
if self.as_goal.id == 0:
# Go to position action
dL = sqrt(
pow(self.as_goal.pose.position.x -
self.pos_old.x, 2) +
pow(self.as_goal.pose.position.y -
self.pos_old.y, 2))
dl = sqrt(
pow(self.as_goal.pose.position.x -
self.position.x, 2) +
pow(self.as_goal.pose.position.y -
self.position.y, 2))
if len(self.pos_err) < 20:
self.pos_err.append(dl)
else:
self.pos_err.pop(0)
self.pos_err.append(dl)
if (len(self.pos_err) == 20) and (
fabs(sum(self.pos_err) / len(self.pos_err)) <
0.5): # mission is successfully finished
self.action_rec_flag = 0 # waiting for new action
self.as_res.status = 0
self.pos_err = []
print 'finished executing go_to_position action'
self.action_server.set_succeeded(self.as_res)
else: # mission is still ongoing
self.as_feed.status = (
1 - dl / dL) * 100 # mission completeness
self.as_feed.pose.position = self.position
#print [fabs(sum(self.pos_err) / len(self.pos_err)), str(self.position), str(self.as_goal.pose.position)]
self.action_server.publish_feedback(self.as_feed)
elif self.as_goal.id == 1:
#if self.perched_count==4:
#return
print 'executing perch action'
self.perched_flag = 1
# static position publisher
#TODO make 4 static pose publishers, for 4 docking stations
self.staticPosPub = rospy.Publisher(
'/' + self.as_goal.object + '/position_static',
NavSts,
queue_size=1)
print 'finished executing perch action ' + self.as_goal.object
self.action_rec_flag = 0 # waiting for new action
self.as_res.status = 0
#self.perched_count+=1
self.action_server.set_succeeded(self.as_res)
elif self.as_goal.id == 2:
#if self.perched_count==4:
#return
print 'executing release action'
self.perched_flag = 0
msg = NavSts()
msg.position = NED(
self.position.x + self.position_offset.x,
self.position.y + self.position_offset.y, 0)
msg.status = 1 # status 1 -- the last static position, give control back to uvsim
#TODO make 4 static pose publishers, for 4 docking stations
self.staticPosPub.publish(
msg
) # signal the end of static position to attached object
print 'finished executing release action'
self.action_rec_flag = 0 # waiting for new action
self.as_res.status = 0
#self.perched_count-=1
self.action_server.set_succeeded(self.as_res)
else:
pass
rospy.sleep(rospy.Duration(0.05))
def __init__(self):
# position
self.position = Point(0, 0, 0)
rospy.Subscriber('position', NavSts, self.position_cb)
# state reference publisher
self.stateRefPub = rospy.Publisher('stateRef', NavSts, queue_size=1)
self.action_rec_flag = 0 # 0 - waiting action, 1 - received action, 2 - executing action
self.as_goal = aPadGoal()
self.as_res = aPadResult()
self.as_feed = aPadFeedback()
# TODO create 4 docking stations -- 4 offset positions for every station + before docking, align the object to station
self.position_offset = Point(-0.5, -0.5, 0) # for docking -- object offset
self.pos_old = Point(self.position.x, self.position.y, self.position.z)
self.pos_err = []
self.perched_flag = 0 # flag for dummy action perching onto aMussel/aFish/other objects action
self.perched_count = 0 # number of currently docked objects (default max 4)
# initialize actions server structures
self.action_server = actionlib.SimpleActionServer("action_server", aPadAction, auto_start=False)
self.action_server.register_goal_callback(self.action_execute_cb)
self.action_server.register_preempt_callback(self.action_preempt_cb)
self.action_server.start()
while not rospy.is_shutdown():
# goal position for aMussel/aFish/object docked onto aPad (if perched!)
#TODO multiple docking stations
goalPosition = NED()
goalPosition.north = self.position.x + self.position_offset.x
goalPosition.east = self.position.y + self.position_offset.y
#goalPosition.z = self.position.z + self.position_offset.z
if self.perched_flag == 1:
self.set_model_state(goalPosition)
if self.action_server.is_active():
###################
# received action #
###################
if self.action_rec_flag == 1:
if self.as_goal.id == 0:
print 'Go to position action' # 2d movement
self.pos_old = Point(self.position.x, self.position.y, 0)
start = Vector3(self.position.x, self.position.y, 0)
end = Vector3(self.as_goal.pose.position.x, self.as_goal.pose.position.y, 0)
dl = sqrt(pow(self.as_goal.pose.position.x - self.position.x, 2) +
pow(self.as_goal.pose.position.y - self.position.y, 2))
# if within 10cm of goal
if dl < 0.1:
self.action_rec_flag = 0 # waiting for new action
self.as_res.status = 0
self.pos_err = []
print 'finished executing go_to_position action'
print "###"
print self.position
print "###"
self.action_server.set_succeeded(self.as_res)
else:
try:
# send goal
fadp_enable = rospy.ServiceProxy('FADP_enable', EnableControl)
fadp_enable(enable=True)
config_vel_controller = rospy.ServiceProxy('ConfigureVelocityController', ConfigureVelocityController)
config_vel_controller(ControllerName="FADP", desired_mode=[2, 2, 0, 0, 0, 0])
velcon_enable = rospy.ServiceProxy('VelCon_enable', EnableControl)
velcon_enable(enable=True)
stateRef = NavSts()
stateRef.header.seq = 0
stateRef.header.stamp.secs = 0
stateRef.header.stamp.nsecs = 0
stateRef.global_position.latitude = 0.0
stateRef.global_position.longitude = 0.0
stateRef.origin.latitude = 0.0
stateRef.origin.longitude = 0.0
stateRef.position.north = self.as_goal.pose.position.x
stateRef.position.east = self.as_goal.pose.position.y
stateRef.position.depth = 0
stateRef.altitude = 0.0
stateRef.body_velocity.x = 0
stateRef.body_velocity.y = 0
stateRef.body_velocity.z = 0
stateRef.gbody_velocity.x = 0
stateRef.gbody_velocity.y = 0
stateRef.gbody_velocity.z = 0
stateRef.orientation.roll = 0
stateRef.orientation.pitch = 0
stateRef.orientation.yaw = 0
stateRef.orientation_rate.roll = 0
stateRef.orientation_rate.pitch = 0
stateRef.orientation_rate.yaw = 0
stateRef.position_variance.north = 0
stateRef.position_variance.east = 0
stateRef.position_variance.depth = 0
stateRef.orientation_variance.roll = 0
stateRef.orientation_variance.pitch = 0
stateRef.orientation_variance.yaw = 0
stateRef.status = 0
self.stateRefPub.publish(stateRef)
self.action_rec_flag = 2 #executing trajectory
except rospy.ServiceException, e:
print "Service for activating controller failed: %s" % e
self.as_res.status = -1
self.action_server.set_aborted(self.as_res)
self.action_rec_flag = 0 # waiting for new actions
elif self.as_goal.id == 1:
print 'perch action'
self.action_rec_flag = 2 # start executing action
elif self.as_goal.id == 2:
print 'release action'
self.action_rec_flag = 2 # start executing action
####################
# executing action #
####################
elif self.action_rec_flag == 2:
self.as_res.id = self.as_goal.id
self.as_feed.id = self.as_goal.id
if self.as_goal.id == 0:
# Go to position action
dL = sqrt(pow(self.as_goal.pose.position.x - self.pos_old.x, 2) +
pow(self.as_goal.pose.position.y - self.pos_old.y, 2))
dl = sqrt(pow(self.as_goal.pose.position.x - self.position.x, 2) +
pow(self.as_goal.pose.position.y - self.position.y, 2))
if len(self.pos_err) < 20:
self.pos_err.append(dl)
else:
self.pos_err.pop(0)
self.pos_err.append(dl)
if (len(self.pos_err) == 20) and (fabs(sum(self.pos_err) / len(self.pos_err)) < 0.5): # mission is successfully finished
self.action_rec_flag = 0 # waiting for new action
self.as_res.status = 0
self.pos_err = []
print 'finished executing go_to_position action'
self.action_server.set_succeeded(self.as_res)
else: # mission is still ongoing
self.as_feed.status = (1 - dl / dL) * 100 # mission completeness
self.as_feed.pose.position = self.position
#print [fabs(sum(self.pos_err) / len(self.pos_err)), str(self.position), str(self.as_goal.pose.position)]
self.action_server.publish_feedback(self.as_feed)
elif self.as_goal.id == 1:
#if self.perched_count==4:
#return
print 'executing perch action'
self.perched_flag = 1
# static position publisher
#TODO make 4 static pose publishers, for 4 docking stations
self.staticPosPub = rospy.Publisher('/' + self.as_goal.object + '/position_static', NavSts, queue_size=1)
print 'finished executing perch action ' + self.as_goal.object
self.action_rec_flag = 0 # waiting for new action
self.as_res.status = 0
#self.perched_count+=1
self.action_server.set_succeeded(self.as_res)
elif self.as_goal.id == 2:
#if self.perched_count==4:
#return
print 'executing release action'
self.perched_flag = 0
msg = NavSts()
msg.position = NED(self.position.x + self.position_offset.x, self.position.y + self.position_offset.y, 0)
msg.status = 1 # status 1 -- the last static position, give control back to uvsim
#TODO make 4 static pose publishers, for 4 docking stations
self.staticPosPub.publish(msg) # signal the end of static position to attached object
print 'finished executing release action'
self.action_rec_flag = 0 # waiting for new action
self.as_res.status = 0
#self.perched_count-=1
self.action_server.set_succeeded(self.as_res)
else:
pass
rospy.sleep(rospy.Duration(0.05))