def setDefaultPrinterName(self):
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
log.debug(self.installed_print_devices)
self.installed_queues = [p.name for p in cups.getPrinters()]
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
printer_name = default_model
installed_printer_names = device.getSupportedCUPSPrinterNames(['hp'])
# Check for duplicate names
if (self.device_uri in self.installed_print_devices and printer_name in self.installed_print_devices[self.device_uri]) \
or (printer_name in installed_printer_names):
i = 2
while True:
t = printer_name + "_%d" % i
if (t not in installed_printer_names) and (self.device_uri not in self.installed_print_devices or t not in self.installed_print_devices[self.device_uri]):
printer_name += "_%d" % i
break
i += 1
self.printer_name_ok = True
self.PrinterNameLineEdit.setText(printer_name)
log.debug(printer_name)
self.printer_name = printer_name
def setDefaultFaxName(self):
self.installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
log.debug(self.installed_fax_devices)
self.fax_uri = self.device_uri.replace('hp:', 'hpfax:')
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.fax_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
fax_name = default_model + "_fax"
installed_fax_names = device.getSupportedCUPSPrinterNames(['hpfax'])
# Check for duplicate names
if (self.fax_uri in self.installed_fax_devices and fax_name in self.installed_fax_devices[self.fax_uri]) \
or (fax_name in installed_fax_names):
i = 2
while True:
t = fax_name + "_%d" % i
if (t not in installed_fax_names) and (self.fax_uri not in self.installed_fax_devices or t not in self.installed_fax_devices[self.fax_uri]):
fax_name += "_%d" % i
break
i += 1
self.fax_name_ok = True
self.FaxNameLineEdit.setText(fax_name)
self.fax_name = fax_name
def setDefaultFaxName(self):
self.installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
log.debug(self.installed_fax_devices)
self.fax_uri = self.device_uri.replace('hp:', 'hpfax:')
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.fax_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
fax_name = default_model + "_fax"
# Check for duplicate names
if self.fax_uri in self.installed_fax_devices and \
fax_name in self.installed_fax_devices[self.fax_uri]:
#if fax_name in self.installed_queues or fax_name == self.printer_name:
i = 2
while True:
t = fax_name + "_%d" % i
if t not in self.installed_fax_devices[self.fax_uri]:
fax_name += "_%d" % i
break
i += 1
self.fax_name_ok = True
self.faxNameLineEdit.setText(fax_name)
self.faxNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultFaxNamePushButton.setEnabled(False)
self.fax_name = fax_name
def setDefaultFaxName(self):
self.installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
log.debug(self.installed_fax_devices)
self.fax_uri = self.device_uri.replace('hp:', 'hpfax:')
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.fax_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
fax_name = default_model + "_fax"
installed_fax_names = device.getSupportedCUPSPrinterNames(['hpfax'])
# Check for duplicate names
if (self.fax_uri in self.installed_fax_devices and fax_name in self.installed_fax_devices[self.fax_uri]) \
or (fax_name in installed_fax_names):
#if fax_name in self.installed_queues or fax_name == self.printer_name:
i = 2
while True:
t = fax_name + "_%d" % i
if (t not in installed_fax_names) and (self.fax_uri not in self.installed_fax_devices or t not in self.installed_fax_devices[self.fax_uri]):
fax_name += "_%d" % i
break
i += 1
self.fax_name_ok = True
self.faxNameLineEdit.setText(fax_name)
self.faxNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultFaxNamePushButton.setEnabled(False)
self.fax_name = fax_name
def setDefaultPrinterName(self):
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
#self.installed_print_devices = device.getSupportedCUPSDevices('*')
log.debug(self.installed_print_devices)
self.installed_queues = [p.name for p in cups.getPrinters()]
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
printer_name = default_model
# Check for duplicate names
if self.device_uri in self.installed_print_devices and \
printer_name in self.installed_print_devices[self.device_uri]:
i = 2
while True:
t = printer_name + "_%d" % i
if t not in self.installed_print_devices[self.device_uri]:
printer_name += "_%d" % i
break
i += 1
self.printer_name_ok = True
self.printerNameLineEdit.setText(printer_name)
log.debug(printer_name)
self.printerNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultPrinterNamePushButton.setEnabled(False)
self.printer_name = printer_name
def setDefaultFaxName(self):
self.installed_fax_devices = device.getSupportedCUPSDevices(["hpfax"])
log.debug(self.installed_fax_devices)
self.fax_uri = self.device_uri.replace("hp:", "hpfax:")
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.fax_uri)
default_model = utils.xstrip(model.replace("series", "").replace("Series", ""), "_")
fax_name = default_model + "_fax"
installed_fax_names = device.getSupportedCUPSPrinterNames(["hpfax"])
# Check for duplicate names
if (self.fax_uri in self.installed_fax_devices and fax_name in self.installed_fax_devices[self.fax_uri]) or (
fax_name in installed_fax_names
):
# if fax_name in self.installed_queues or fax_name == self.printer_name:
i = 2
while True:
t = fax_name + "_%d" % i
if (t not in installed_fax_names) and (
self.fax_uri not in self.installed_fax_devices or t not in self.installed_fax_devices[self.fax_uri]
):
fax_name += "_%d" % i
break
i += 1
self.fax_name_ok = True
self.faxNameLineEdit.setText(fax_name)
self.faxNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultFaxNamePushButton.setEnabled(False)
self.fax_name = fax_name
def setDefaultPrinterName(self):
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
#self.installed_print_devices = device.getSupportedCUPSDevices('*')
log.debug(self.installed_print_devices)
self.installed_queues = [p.name for p in cups.getPrinters()]
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
printer_name = default_model
installed_printer_names = device.getSupportedCUPSPrinterNames(['hp'])
# Check for duplicate names
if (self.device_uri in self.installed_print_devices and printer_name in self.installed_print_devices[self.device_uri]) \
or (printer_name in installed_printer_names):
i = 2
while True:
t = printer_name + "_%d" % i
if (t not in installed_printer_names) and (self.device_uri not in self.installed_print_devices or t not in self.installed_print_devices[self.device_uri]):
printer_name += "_%d" % i
break
i += 1
self.printer_name_ok = True
self.printerNameLineEdit.setText(printer_name)
log.debug(printer_name)
self.printerNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultPrinterNamePushButton.setEnabled(False)
self.printer_name = printer_name
def updatePPDPage(self, ppds=None):
QApplication.setOverrideCursor(QApplication.waitCursor)
try:
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(
self.device_uri)
except Error:
self.FailureUI(
self.__tr(
"<b>Device not found or invalid HPLIP device.</b><p>If you specified a USB ID, IP address, or other parameter, please re-check it and try again."
))
self.close()
sys.exit()
if ppds is None or not ppds:
ppds = cups.getSystemPPDs()
#print ppds
default_model = utils.xstrip(
model.replace('series', '').replace('Series', ''), '_')
stripped_model = cups.stripModel2(
models.normalizeModelName(model).lower())
#Check if common ppd name is already given in models.dat(This is needed because in case of devices having more than one derivatives
#will have diffrent model name strings in device ID, because of which we don't get the common ppd name for search)
ppd_name = self.mq.get('ppd-name', 0)
if ppd_name == 0:
self.ppd = cups.getPPDFile2(stripped_model, ppds)
else:
self.ppd = cups.getPPDFile2(ppd_name, ppds)
log.debug(self.ppd)
self.ppdListView.clear()
if self.ppd is not None:
#for ppd in self.ppd_dict:
PPDListViewItem(self.ppdListView, self.ppd[0], self.ppd[1])
# i = self.ppdListView.firstChild()
# self.ppdListView.setCurrentItem(i)
# self.ppdListView.setSelected(i, True)
# self.ppd_file = self.ppdListView.currentItem().ppd_file
self.ppd_file = self.ppd[0]
log.debug(self.ppd_file)
else:
self.FailureUI(
self.__tr(
'<b>PPD not file found.</b><p>An appropriate PPD file could not be found. Please check your HPLIP install, use <i>Select Other...</i>, or download one from linuxprinting.org.'
))
QApplication.restoreOverrideCursor()
def setDefaultPrinterName(self):
self.installed_print_devices = device.getSupportedCUPSDevices(["hp"])
# self.installed_print_devices = device.getSupportedCUPSDevices('*')
log.debug(self.installed_print_devices)
self.installed_queues = [p.name for p in cups.getPrinters()]
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
default_model = utils.xstrip(model.replace("series", "").replace("Series", ""), "_")
printer_name = default_model
installed_printer_names = device.getSupportedCUPSPrinterNames(["hp"])
# Check for duplicate names
if (
self.device_uri in self.installed_print_devices
and printer_name in self.installed_print_devices[self.device_uri]
) or (printer_name in installed_printer_names):
warn_text = self.__tr(
"<b>One or more print queues already exist for this device: %s</b>.<br> <b>Would you like to install another print queue for this device ?</b>"
% ", ".join([printer.encode("utf-8") for printer in installed_printer_names if printer_name in printer])
)
if (
QMessageBox.warning(
self, self.caption(), warn_text, QMessageBox.Yes, QMessageBox.No, QMessageBox.NoButton
)
== QMessageBox.Yes
):
i = 2
while True:
t = printer_name + "_%d" % i
if (t not in installed_printer_names) and (
self.device_uri not in self.installed_print_devices
or t not in self.installed_print_devices[self.device_uri]
):
printer_name += "_%d" % i
break
i += 1
else:
self.close()
self.printer_name_ok = True
self.printerNameLineEdit.setText(printer_name)
log.debug(printer_name)
self.printerNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultPrinterNamePushButton.setEnabled(False)
self.printer_name = printer_name
def setDefaultPrinterName(self):
self.installed_print_devices = device.getSupportedCUPSDevices(['hp'])
#self.installed_print_devices = device.getSupportedCUPSDevices('*')
log.debug(self.installed_print_devices)
self.installed_queues = [p.name for p in cups.getPrinters()]
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(
self.device_uri)
default_model = utils.xstrip(
model.replace('series', '').replace('Series', ''), '_')
printer_name = default_model
installed_printer_names = device.getSupportedCUPSPrinterNames(['hp'])
# Check for duplicate names
if (self.device_uri in self.installed_print_devices and printer_name in self.installed_print_devices[self.device_uri]) \
or (printer_name in installed_printer_names):
warn_text = self.__tr(
"<b>One or more print queues already exist for this device: %s</b>.<br> <b>Would you like to install another print queue for this device ?</b>"
% ', '.join([
printer.encode('utf-8')
for printer in installed_printer_names
if printer_name in printer
]))
if (QMessageBox.warning(self, self.caption(), warn_text,
QMessageBox.Yes, QMessageBox.No,
QMessageBox.NoButton) == QMessageBox.Yes):
i = 2
while True:
t = printer_name + "_%d" % i
if (t not in installed_printer_names) and (
self.device_uri not in self.installed_print_devices
or t not in self.installed_print_devices[
self.device_uri]):
printer_name += "_%d" % i
break
i += 1
else:
self.close()
self.printer_name_ok = True
self.printerNameLineEdit.setText(printer_name)
log.debug(printer_name)
self.printerNameLineEdit.setPaletteBackgroundColor(self.bg)
self.defaultPrinterNamePushButton.setEnabled(False)
self.printer_name = printer_name
def updatePPDPage(self, ppds=None):
QApplication.setOverrideCursor(QApplication.waitCursor)
try:
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = device.parseDeviceURI(self.device_uri)
except Error:
self.FailureUI(self.__tr("<b>Device not found or invalid HPLIP device.</b><p>If you specified a USB ID, IP address, or other parameter, please re-check it and try again."))
self.close()
sys.exit()
if ppds is None or not ppds:
ppds = cups.getSystemPPDs()
#print ppds
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
stripped_model = cups.stripModel2(models.normalizeModelName(model).lower())
#Check if common ppd name is already given in models.dat(This is needed because in case of devices having more than one derivatives
#will have diffrent model name strings in device ID, because of which we don't get the common ppd name for search)
ppd_name = self.mq.get('ppd-name',0)
if ppd_name == 0:
self.ppd = cups.getPPDFile2(stripped_model, ppds)
else:
self.ppd = cups.getPPDFile2(ppd_name, ppds)
log.debug(self.ppd)
self.ppdListView.clear()
if self.ppd is not None:
#for ppd in self.ppd_dict:
PPDListViewItem(self.ppdListView, self.ppd[0], self.ppd[1])
# i = self.ppdListView.firstChild()
# self.ppdListView.setCurrentItem(i)
# self.ppdListView.setSelected(i, True)
# self.ppd_file = self.ppdListView.currentItem().ppd_file
self.ppd_file = self.ppd[0]
log.debug(self.ppd_file)
else:
self.FailureUI(self.__tr('<b>PPD not file found.</b><p>An appropriate PPD file could not be found. Please check your HPLIP install, use <i>Select Other...</i>, or download one from linuxprinting.org.'))
QApplication.restoreOverrideCursor()
tui.header("UPDATING PLUGIN")
else:
tui.header("PLUG-IN INSTALLATION")
hp_plugin = utils.which('hp-plugin')
if hp_plugin:
cmd = "hp-plugin -i"
if os_utils.execute(cmd) != 0:
log.error("Failed to install Plugin.")
log.error("The device you are trying to setup requires a binary plug-in. Some functionalities may not work as expected without plug-ins. Please run 'hp-plugin' as normal user to install plug-ins.Visit http://hplipopensource.com for more infomation.")
clean_exit(1)
ppds = cups.getSystemPPDs()
default_model = utils.xstrip(model.replace('series', '').replace('Series', ''), '_')
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
for d in list(installed_print_devices.keys()):
for p in installed_print_devices[d]:
log.debug("found print queue '%s'" % p)
installed_fax_devices = device.getSupportedCUPSDevices(['hpfax'])
for d in list(installed_fax_devices.keys()):
for f in installed_fax_devices[d]:
log.debug("found fax queue '%s'" % f)
# ******************************* PRINT QUEUE SETUP
if setup_print:
tui.header("PRINT QUEUE SETUP")
def normalizeModelName(model):
return utils.xstrip(
model.replace(' ', '_').replace('__',
'_').replace('~',
'').replace('/', '_'),
'_')
def normalizeModelName(model):
return utils.xstrip(model.replace(' ', '_').replace('__', '_').replace('~','').replace('/', '_'), '_')
