def setup_tensorboard(self, logdir, raw_data_dir=True):
'''
Initialize tensorboard. To easily compare experiments,
use runs/exp1, runs/exp2, etc.
Method creates the dir if needed.
Additionally, sets self.csv_pred_writer and self.csv_label_writer
to None, or open CSV writers, depending on the value of raw_data_dir,
see create_csv_writer()
:param logdir: root for tensorboard events
:type logdir: str
'''
if not os.path.isdir(logdir):
os.makedirs(logdir)
# For storing train/val preds/labels
# for every epoch. Used to create charts
# after run is finished:
self.csv_writer = self.create_csv_writer(raw_data_dir)
# Place to store intermediate models:
self.model_archive = \
self.create_model_archive(self.config,
self.num_classes
)
# Use SummaryWriterPlus to avoid confusing
# directory creations when calling add_hparams()
# on the writer:
self.writer = SummaryWriterPlus(log_dir=logdir)
# Intermediate storage for train and val results:
self.results = ResultCollection()
self.log.info(
f"To view tensorboard charts: in shell: tensorboard --logdir {logdir}; then browser: localhost:6006"
)
class BirdsBasicTrainerCV:
'''
classdocs
'''
# Number of intermediate models to save
# during training:
MODEL_ARCHIVE_SIZE = 20
# For some tensorboard displays:
# for how many epochs in the past
# to display data:
DISPLAY_HISTORY_LEN = 10
#------------------------------------
# Constructor
#-------------------
def __init__(self,
config_info,
device=0,
percentage=None,
debugging=False):
'''
:param config_info: all path and training parameters
:type config_info: NeuralNetConfig
:param debugging: output lots of debug info
:type debugging: bool
:param device: number of GPU to use; default is dev 0
if any GPU is available
:type device: {None | int}
:param percentage: percentage of training data to
use
:type percentage: {int | float}
'''
self.log = LoggingService()
if debugging:
self.log.logging_level = DEBUG
if percentage is not None:
# Integrity check:
if type(percentage) not in [int, float]:
raise TypeError(
f"Percentage must be int or float, not {type(percentage)}")
if percentage < 1 or percentage > 100:
raise ValueError(
f"Percentage must be between 1 and 100, not {percentage}")
if device is None:
device = 0
torch.cuda.set_device(device)
else:
available_gpus = torch.cuda.device_count()
if available_gpus == 0:
self.log.info("No GPU available; running on CPU")
else:
if device > available_gpus - 1:
raise ValueError(
f"Asked to operate on device {device}, but only {available_gpus} are available"
)
torch.cuda.set_device(device)
self.curr_dir = os.path.dirname(os.path.abspath(__file__))
try:
self.config = self.initialize_config_struct(config_info)
except Exception as e:
msg = f"During config init: {repr(e)}"
self.log.err(msg)
raise RuntimeError(msg) from e
try:
self.root_train_test_data = self.config.getpath(
'Paths', 'root_train_test_data', relative_to=self.curr_dir)
except ValueError as e:
raise ValueError(
"Config file must contain an entry 'root_train_test_data' in section 'Paths'"
) from e
self.batch_size = self.config.getint('Training', 'batch_size')
self.kernel_size = self.config.getint('Training', 'kernel_size')
self.min_epochs = self.config.Training.getint('min_epochs')
self.max_epochs = self.config.Training.getint('max_epochs')
self.lr = self.config.Training.getfloat('lr')
self.net_name = self.config.Training.net_name
self.pretrained = self.config.Training.getboolean('pretrained', False)
self.num_folds = self.config.Training.getint('num_folds')
self.freeze = self.config.Training.getint('freeze', 0)
self.to_grayscale = self.config.Training.getboolean(
'to_grayscale', True)
self.set_seed(42)
self.log.info("Parameter summary:")
self.log.info(f"network {self.net_name}")
self.log.info(f"pretrained {self.pretrained}")
if self.pretrained:
self.log.info(f"freeze {self.freeze}")
self.log.info(f"min epochs {self.min_epochs}")
self.log.info(f"max epochs {self.max_epochs}")
self.log.info(f"batch_size {self.batch_size}")
self.fastest_device = torch.device(
'cuda' if torch.cuda.is_available() else 'cpu')
self.device = self.fastest_device
self.num_classes = self.find_num_classes(self.root_train_test_data)
self.initialize_model()
sample_width = self.config.getint('Training', 'sample_width', 400)
sample_height = self.config.getint('Training', 'sample_height', 400)
self.train_loader = self.get_dataloader(sample_width,
sample_height,
perc_data_to_use=percentage)
self.log.info(f"Expecting {len(self.train_loader)} batches per epoch")
num_train_samples = len(self.train_loader.dataset)
num_classes = len(self.train_loader.dataset.class_names())
self.log.info(
f"Training set contains {num_train_samples} samples across {num_classes} classes"
)
self.class_names = self.train_loader.dataset.class_names()
log_dir = os.path.join(self.curr_dir, 'runs')
raw_data_dir = os.path.join(self.curr_dir, 'runs_raw_results')
self.setup_tensorboard(log_dir, raw_data_dir=raw_data_dir)
# Log a few example spectrograms to tensorboard;
# one per class:
TensorBoardPlotter.write_img_grid(
self.writer,
self.root_train_test_data,
len(self.class_names), # Num of train examples
)
# All ResultTally instances are
# collected here: (num_folds * num-epochs)
# each for training and validation steps.
self.step_results = ResultCollection()
self.log.debug(
f"Just before train: \n{'none--on CPU' if self.fastest_device.type == 'cpu' else torch.cuda.memory_summary()}"
)
try:
final_step = self.train()
self.visualize_final_epoch_results(final_step)
finally:
self.close_tensorboard()
#------------------------------------
# train
#-------------------
def train(self):
overall_start_time = datetime.datetime.now()
# Just for sanity: keep track
# of number of batches...
total_batch_num = 0
# Note: since we are cross validating, the
# data loader's set_epoch() method is only
# called once (automatically) during instantiation
# of the associated sampler. Moving from split
# to split includes shuffling if the caller
# specified that.
# Training
for split_num in range(self.train_loader.num_folds):
split_start_time = datetime.datetime.now()
self.initialize_model()
for epoch in range(self.max_epochs):
# Set model to train mode:
self.model.train()
epoch_start_time = datetime.datetime.now()
self.log.info(f"Starting epoch {epoch} training")
# Sanity check record: will record
# how many samples from each class were
# used:
self.class_coverage = {}
# Sanity records: will record number
# of samples of each class that are used
# during training and validation:
label_distrib = {}
batch_num = 0
self.log.info(
f"Train epoch {epoch}/{self.max_epochs} split {split_num}/{self.train_loader.num_folds}"
)
try:
for batch, targets in self.train_loader:
# Update the sanity check
# num of batches seen, and distribution
# of samples across classes:
batch_num += 1
total_batch_num += 1
# Update sanity check records:
for lbl in targets:
lbl = int(lbl)
try:
label_distrib[lbl] += 1
except KeyError:
label_distrib[lbl] = 1
try:
self.class_coverage[lbl]['train'] += 1
except KeyError:
self.class_coverage[lbl] = {
'train': 1,
'val': 0
}
self.log.debug(
f"Top of training loop: \n{'none--on CPU' if self.fastest_device.type == 'cpu' else torch.cuda.memory_summary()}"
)
images = FileUtils.to_device(batch, 'gpu')
labels = FileUtils.to_device(targets, 'gpu')
outputs = self.model(images)
loss = self.loss_fn(outputs, labels)
self.optimizer.zero_grad()
loss.backward()
self.optimizer.step()
# Remember the last batch's train result of this
# split (results for earlier batches of
# the same split will be overwritten). This statement
# must sit before deleting output and labels:
step_num = self.step_number(epoch, split_num,
self.num_folds)
self.remember_results(LearningPhase.TRAINING, step_num,
outputs, labels, loss)
self.log.debug(
f"Just before clearing gpu: \n{'none--on CPU' if self.fastest_device.type == 'cpu' else torch.cuda.memory_summary()}"
)
images = FileUtils.to_device(images, 'cpu')
outputs = FileUtils.to_device(outputs, 'cpu')
labels = FileUtils.to_device(labels, 'cpu')
loss = FileUtils.to_device(loss, 'cpu')
del images
del outputs
del labels
del loss
torch.cuda.empty_cache()
self.log.debug(
f"Just after clearing gpu: \n{'none--on CPU' if self.fastest_device.type == 'cpu' else torch.cuda.memory_summary()}"
)
except EndOfSplit:
end_time = datetime.datetime.now()
train_time_duration = end_time - epoch_start_time
# A human readable duration st down to minutes:
duration_str = FileUtils.time_delta_str(
train_time_duration, granularity=4)
self.log.info(
f"Done training epoch {epoch} of split {split_num} (duration: {duration_str})"
)
#***********
#print(f"****** num_batches in split: {batch_num}" )
#print(f"****** LblDist: {label_distrib}")
#***********
self.validate_split(step_num)
self.visualize_step(step_num)
# Save model, keeping self.model_archive_size models:
self.model_archive.save_model(self.model, epoch)
self.log.debug(
f"After eval: \n{'none--on CPU' if self.fastest_device.type == 'cpu' else torch.cuda.memory_summary()}"
)
# Next Epoch
continue
end_time = datetime.datetime.now()
train_time_duration = end_time - split_start_time
# A human readable duration st down to minutes:
duration_str = FileUtils.time_delta_str(train_time_duration,
granularity=4)
self.log.info(
f"Done training split {split_num} (duration: {duration_str})")
# Next split
continue
end_time = datetime.datetime.now()
epoch_duration = end_time - epoch_start_time
epoch_dur_str = FileUtils.time_delta_str(epoch_duration, granularity=4)
cumulative_dur = end_time - overall_start_time
cum_dur_str = FileUtils.time_delta_str(cumulative_dur, granularity=4)
msg = f"Done epoch {epoch} (epoch duration: {epoch_dur_str}; cumulative: {cum_dur_str})"
self.log.info(msg)
#******self.scheduler.step()
# Fresh results tallying
#self.results.clear()
self.log.info(
f"Training complete after {self.train_loader.num_folds} splits")
# Report the sanity checks:
self.log.info(f"Total batches processed: {total_batch_num}")
for cid in self.class_coverage.keys():
train_use, val_use = self.class_coverage[cid].items()
self.log.info(
f"{self.class_names[cid]} Training: {train_use}, Validation: {val_use}"
)
# All seems to have gone well. Report the
# overall result of the final epoch for the
# hparms config used in this process:
self.report_hparams_summary(self.latest_result)
# The final epoch number:
return epoch
#------------------------------------
# validate_split
#-------------------
def validate_split(self, step):
'''
Validate one split, using that split's
validation fold. Return time taken. Record
results for tensorboard and other record keeping.
:param step: current combination of epoch and
split
:type step: int
:return: number of epoch seconds needed for the validation
:rtype: int
'''
# Validation
self.log.debug(
f"Start of validation: \n{'none--on CPU' if self.fastest_device.type == 'cpu' else torch.cuda.memory_summary()}"
)
start_time = datetime.datetime.now()
self.log.info(f"Starting validation for step {step}")
self.model.eval()
with torch.no_grad():
for img_tensor, target in self.train_loader.validation_samples():
expanded_img_tensor = unsqueeze(img_tensor, dim=0)
expanded_target = unsqueeze(target, dim=0)
# Update sanity record:
self.class_coverage[int(target)]['val'] += 1
images = FileUtils.to_device(expanded_img_tensor, 'gpu')
label = FileUtils.to_device(expanded_target, 'gpu')
outputs = self.model(images)
loss = self.loss_fn(outputs, label)
images = FileUtils.to_device(images, 'cpu')
outputs = FileUtils.to_device(outputs, 'cpu')
label = FileUtils.to_device(label, 'cpu')
loss = FileUtils.to_device(loss, 'cpu')
self.remember_results(LearningPhase.VALIDATING, step, outputs,
label, loss)
del images
del outputs
del label
del loss
torch.cuda.empty_cache()
end_time = datetime.datetime.now()
val_time_duration = end_time - start_time
# A human readable duration st down to minues:
duration_str = FileUtils.time_delta_str(val_time_duration,
granularity=4)
self.log.info(f"Done validation (duration: {duration_str})")
return val_time_duration
# ------------- Utils -----------
#------------------------------------
# report_acc_loss
#-------------------
def report_acc_loss(self, phase, epoch, accumulated_loss):
self.writer.add_scalar(f"loss/{phase}", accumulated_loss, epoch)
#------------------------------------
# remember_results
#-------------------
def remember_results(
self,
phase,
step,
outputs,
labels,
loss,
):
# Add the results
tally = ResultTally(step, phase, outputs, labels, loss,
self.num_classes, self.batch_size)
# Add result to intermediate results collection of
# tallies:
self.results[step] = tally
# Same with the session-wide
# collection:
self.step_results.add(tally)
#------------------------------------
# visualize_step
#-------------------
def visualize_step(self, step):
'''
Take the ResultTally instances
in the train and val ResultCollections
in self.results, and report appropriate
aggregates to tensorboard. Computes
f1 scores, accuracies, etc. for given
step.
Separately for train and validation
results: build one long array
of predictions, and a corresponding
array of labels. Also, average the
loss across all instances.
The preds and labels as rows to csv
files.
'''
val_tally = self.results[(step, str(LearningPhase.VALIDATING))]
train_tally = self.results[(step, str(LearningPhase.TRAINING))]
result_coll = ResultCollection()
result_coll.add(val_tally, step)
result_coll.add(train_tally, step)
self.latest_result = {'train': train_tally, 'val': val_tally}
# If we are to write preds and labels to
# .csv for later additional processing:
if self.csv_writer is not None:
self.csv_writer.writerow([
step, train_tally.preds, train_tally.labels, val_tally.preds,
val_tally.labels
])
TensorBoardPlotter.visualize_step(
result_coll, self.writer,
[LearningPhase.TRAINING, LearningPhase.VALIDATING], step,
self.class_names)
# History of learning rate adjustments:
lr_this_step = self.optimizer.param_groups[0]['lr']
self.writer.add_scalar('learning_rate', lr_this_step, global_step=step)
#------------------------------------
# visualize_final_epoch_results
#-------------------
def visualize_final_epoch_results(self, epoch):
'''
Reports to tensorboard just for the
final epoch.
Expect self.latest_result to be the latest
ResultTally.
'''
# DISPLAY_HISTORY_LEN holds the number
# of historic epochs we will show. Two
# results per epochs --> need
# 2*DISPLAY_HISTORY_LEN results. But check
# that there are that many, and show fewer
# if needed:
num_res_to_show = min(len(self.step_results),
2 * self.DISPLAY_HISTORY_LEN)
f1_hist = self.step_results[-num_res_to_show:]
# First: the table of train and val f1-macro
# scores for the past few epochs:
#
# |phase|ep0 |ep1 |ep2 |
# |-----|-----|----|----|
# |train| f1_0|f1_1|f1_2|
# | val| f1_0|f1_1|f1_2|
f1_macro_tbl = TensorBoardPlotter.make_f1_train_val_table(f1_hist)
self.writer.add_text('f1/history', f1_macro_tbl)
# Now, in the same tensorboard row: the
# per_class train/val f1 scores for each
# class separately:
#
# |class|weighted mean f1 train|weighted mean f1 val|
# |-----|----------------------|--------------------|
# | c1 |0.1 |0.6 |
# | c2 |0.1 |0.6 |
# | c3 |0.1 |0.6 |
# ------|----------------------|--------------------|
f1_all_classes = TensorBoardPlotter.make_all_classes_f1_table(
self.latest_result, self.class_names)
self.writer.add_text('f1/per-class', f1_all_classes)
#------------------------------------
# report_hparams_summary
#-------------------
def report_hparams_summary(self, latest_result):
'''
Called at the end of training. Constructs
a summary to report for the hyperparameters
used in this process. Reports to the tensorboard.
Hyperparameters reported:
o lr
o optimizer
o batch_size
o kernel_size
Included in the measures are:
o balanced_accuracy (train and val)
o mean_accuracy_train (train and val)
o epoch_prec_weighted
o epoch_recall_weighted
o epoch_mean_loss (train and val)
:param latest_result: dict with keys 'train' and
'val', holding the respective most recent
(i.e. last-epoch) ResultTally
:type latest_result: {'train' : ResultTally,
'val' : ResultTally
}
'''
# Get the latest validation tally:
train_tally = latest_result['train']
val_tally = latest_result['val']
hparms_vals = OrderedDict({
'net':
self.net_name,
'pretrained':
f"{self.pretrained}",
'lr_initial':
self.config.Training.lr,
'optimizer':
self.config.Training.opt_name,
'batch_size':
self.config.getint('Training', 'batch_size'),
'kernel_size':
self.config.getint('Training', 'kernel_size'),
'to_grayscale':
self.to_grayscale
})
metric_results = {
'zz_balanced_adj_acc_train': train_tally.balanced_acc,
'zz_balanced_adj_acc_val': val_tally.balanced_acc,
'zz_acc_train': train_tally.accuracy,
'zz_acc_val': val_tally.accuracy,
'zz_epoch_weighted_prec': val_tally.prec_weighted,
'zz_epoch_weighted_recall': val_tally.recall_weighted,
'zz_epoch_mean_loss_train': train_tally.mean_loss,
'zz_epoch_mean_loss_val': val_tally.mean_loss
}
self.writer.add_hparams(hparms_vals, metric_results)
#------------------------------------
# get_dataloader
#-------------------
def get_dataloader(self,
sample_width,
sample_height,
perc_data_to_use=None):
'''
Returns a cross validating dataloader.
If perc_data_to_use is None, all samples
under self.root_train_test_data will be
used for training. Else percentage indicates
the percentage of those samples to use. The
selection is random.
:param sample_width: pixel width of returned images
:type sample_width: int
:param sample_height: pixel height of returned images
:type sample_height: int
:param perc_data_to_use: amount of available training
data to use.
:type perc_data_to_use: {None | int | float}
:return: a data loader that serves batches of
images and their assiated labels
:rtype: CrossValidatingDataLoader
'''
data_root = self.root_train_test_data
train_dataset = SingleRootImageDataset(data_root,
sample_width=sample_width,
sample_height=sample_height,
percentage=perc_data_to_use,
to_grayscale=True)
sampler = SKFSampler(train_dataset,
num_folds=self.num_folds,
seed=42,
shuffle=True,
drop_last=True)
train_loader = CrossValidatingDataLoader(train_dataset,
batch_size=self.batch_size,
shuffle=True,
drop_last=True,
sampler=sampler,
num_folds=self.num_folds)
return train_loader
#------------------------------------
# initialize_model
#-------------------
def initialize_model(self):
self.model = NetUtils.get_net(self.net_name,
num_classes=self.num_classes,
pretrained=self.pretrained,
freeze=self.freeze,
to_grayscale=self.to_grayscale)
self.log.debug(
f"Before any gpu push: \n{'none--on CPU' if self.fastest_device.type == 'cpu' else torch.cuda.memory_summary()}"
)
FileUtils.to_device(self.model, 'gpu')
self.log.debug(
f"Before after model push: \n{'none--on CPU' if self.fastest_device.type == 'cpu' else torch.cuda.memory_summary()}"
)
self.opt_name = self.config.Training.get('optimizer',
'Adam') # Default
self.optimizer = self.get_optimizer(self.opt_name, self.model, self.lr)
self.loss_fn = nn.CrossEntropyLoss()
self.scheduler = optim.lr_scheduler.CosineAnnealingLR(
self.optimizer, self.min_epochs)
#------------------------------------
# find_num_classes
#-------------------
def find_num_classes(self, data_root):
'''
Expect two subdirectories under data_root:
train and validation. Underneath each are
further subdirectories whose names are the
classes:
train validation
class1 class2 class3 class1 class2 class3
imgs imgs imgs imgs imgs imgs
No error checking to confirm this structure
:param data_root: path to parent of train/validation
:type data_root: str
:return: number of unique classes as obtained
from the directory names
:rtype: int
'''
self.classes = FileUtils.find_class_names(data_root)
return len(self.classes)
#------------------------------------
# setup_tensorboard
#-------------------
def setup_tensorboard(self, logdir, raw_data_dir=True):
'''
Initialize tensorboard. To easily compare experiments,
use runs/exp1, runs/exp2, etc.
Method creates the dir if needed.
Additionally, sets self.csv_pred_writer and self.csv_label_writer
to None, or open CSV writers, depending on the value of raw_data_dir,
see create_csv_writer()
:param logdir: root for tensorboard events
:type logdir: str
'''
if not os.path.isdir(logdir):
os.makedirs(logdir)
# For storing train/val preds/labels
# for every epoch. Used to create charts
# after run is finished:
self.csv_writer = self.create_csv_writer(raw_data_dir)
# Place to store intermediate models:
self.model_archive = \
self.create_model_archive(self.config,
self.num_classes
)
# Use SummaryWriterPlus to avoid confusing
# directory creations when calling add_hparams()
# on the writer:
self.writer = SummaryWriterPlus(log_dir=logdir)
# Intermediate storage for train and val results:
self.results = ResultCollection()
self.log.info(
f"To view tensorboard charts: in shell: tensorboard --logdir {logdir}; then browser: localhost:6006"
)
#------------------------------------
# create_csv_writer
#-------------------
def create_csv_writer(self, raw_data_dir):
'''
Create a csv_writer that will fill a csv
file during training/validation as follows:
epoch train_preds train_labels val_preds val_labels
Cols after the integer 'epoch' col will each be
an array of ints:
train_preds train_lbls val_preds val_lbls
2,"[2,5,1,2,3]","[2,6,1,2,1]","[1,2]", "[1,3]"
If raw_data_dir is provided as a str, it is
taken as the directory where csv file with predictions
and labels are to be written. The dir is created if necessary.
If the arg is instead set to True, a dir 'runs_raw_results' is
created under this script's directory if it does not
exist. Then a subdirectory is created for this run,
using the hparam settings to build a file name. The dir
is created if needed. Result ex.:
<script_dir>
runs_raw_results
Run_lr_0.001_br_32
run_2021_05_ ... _lr_0.001_br_32.csv
Then file name is created, again from the run
hparam settings. If this file exists, user is asked whether
to remove or append. The inst var self.csv_writer is
initialized to:
o None if csv file exists, but is not to
be overwritten nor appended-to
o A filed descriptor for a file open for either
'write' or 'append.
:param raw_data_dir: If simply True, create dir and file names
from hparams, and create as needed. If a string, it is
assumed to be the directory where a .csv file is to be
created. If None, self.csv_writer is set to None.
:type raw_data_dir: {None | True | str|
:return: CSV writer ready for action. Set either to
write a fresh file, or append to an existing file.
Unless file exists, and user decided not to overwrite
:rtype: {None | csv.writer}
'''
# Ensure the csv file root dir exists if
# we'll do a csv dir and run-file below it:
if type(raw_data_dir) == str:
raw_data_root = raw_data_dir
else:
raw_data_root = os.path.join(self.curr_dir, 'runs_raw_results')
if not os.path.exists(raw_data_root):
os.mkdir(raw_data_root)
# Can rely on raw_data_root being defined and existing:
if raw_data_dir is None:
return None
# Create both a raw dir sub-directory and a .csv file
# for this run:
csv_subdir_name = FileUtils.construct_filename(self.config.Training,
prefix='Run',
incl_date=True)
os.makedirs(csv_subdir_name)
# Create a csv file name:
csv_file_nm = FileUtils.construct_filename(self.config.Training,
prefix='run',
suffix='.csv',
incl_date=True)
csv_path = os.path.join(raw_data_root, csv_file_nm)
# Get csv_raw_fd appropriately:
if os.path.exists(csv_path):
do_overwrite = FileUtils.user_confirm(
f"File {csv_path} exists; overwrite?", default='N')
if not do_overwrite:
do_append = FileUtils.user_confirm(f"Append instead?",
default='N')
if not do_append:
return None
else:
mode = 'a'
else:
mode = 'w'
csv_writer = CSVWriterCloseable(csv_path, mode=mode, delimiter=',')
header = [
'epoch', 'train_preds', 'train_labels', 'val_preds', 'val_labels'
]
csv_writer.writerow(header)
return csv_writer
#------------------------------------
# create_model_archive
#-------------------
def create_model_archive(self, config, num_classes):
'''
Creates facility for saving partially trained
models along the way.
:param config:
:type config:
:param num_classes:
:type num_classes:
:return: ModelArchive instance ready
for calls to save_model()
:rtype: ModelArchive
'''
model_archive = ModelArchive(config,
num_classes,
history_len=self.MODEL_ARCHIVE_SIZE,
log=self.log)
return model_archive
#------------------------------------
# close_tensorboard
#-------------------
def close_tensorboard(self):
if self.csv_writer is not None:
try:
self.csv_writer.close()
except Exception as e:
self.log.warn(f"Could not close csv file: {repr(e)}")
try:
self.writer.close()
except AttributeError:
self.log.warn(
"Method close_tensorboard() called before setup_tensorboard()?"
)
except Exception as e:
raise RuntimeError(
f"Problem closing tensorboard: {repr(e)}") from e
#------------------------------------
# get_optimizer
#-------------------
def get_optimizer(self, optimizer_name, model, lr):
optimizer_name = optimizer_name.lower()
if optimizer_name == 'adam':
optimizer = optim.Adam(model.parameters(),
lr=lr,
eps=1e-3,
amsgrad=True)
return optimizer
if optimizer_name == 'sgd':
optimizer = optim.SGD(model.parameters(), lr=lr, momentum=0.9)
return optimizer
if optimizer_name == 'rmsprop':
optimizer = optim.RMSprop(model.parameters(), lr=lr, momentum=0.9)
return optimizer
raise ValueError(f"Optimizer {optimizer_name} not supported")
#------------------------------------
# initialize_config_struct
#-------------------
def initialize_config_struct(self, config_info):
'''
Initialize a config dict of dict with
the application's configurations. Sections
will be:
config['Paths'] -> dict[attr : val]
config['Training'] -> dict[attr : val]
config['Parallelism'] -> dict[attr : val]
The config read method will handle config_info
being None.
If config_info is a string, it is assumed either
to be a file containing the configuration, or
a JSON string that defines the config.
Else config_info is assumed to be a NeuralNetConfig.
The latter is relevant only if using this file
as a library, rather than a command line tool.
If given a NeuralNetConfig instance, it is returned
unchanged.
:param config_info: the information needed to construct
the structure
:type config_info: {NeuralNetConfig | str}
:return a NeuralNetConfig instance with all parms
initialized
:rtype NeuralNetConfig
'''
if isinstance(config_info, str):
# Is it a JSON str? Should have a better test!
if config_info.startswith('{'):
# JSON String:
config = NeuralNetConfig.from_json(config_info)
else:
config = self.read_configuration(config_info)
elif isinstance(config_info, NeuralNetConfig):
config = config_info
else:
msg = f"Error: must have a config file, not {config_info}. See config.cfg.Example in project root"
# Since logdir may be in config, need to use print here:
print(msg)
raise ConfigError(msg)
return config
#------------------------------------
# read_configuration
#-------------------
def read_configuration(self, conf_file):
'''
Parses config file that describes training parameters,
various file paths, and how many GPUs different machines have.
Syntax follows Python's configfile package, which includes
sections, and attr/val pairs in each section.
Expected sections:
o Paths: various file paths for the application
o Training: holds batch sizes, number of epochs, etc.
o Parallelism: holds number of GPUs on different machines
For Parallelism, expect entries like:
foo.bar.com = 4
127.0.0.1 = 5
localhost = 3
172.12.145.1 = 6
Method identifies which of the entries is
'localhost' by comparing against local hostname.
Though 'localhost' or '127.0.0.1' may be provided.
Returns a dict of dicts:
config[section-names][attr-names-within-section]
Types of standard entries, such as epochs, batch_size,
etc. are coerced, so that, e.g. config['Training']['epochs']
will be an int. Clients may add non-standard entries.
For those the client must convert values from string
(the type in which values are stored by default) to the
required type. This can be done the usual way: int(...),
or using one of the configparser's retrieval methods
getboolean(), getint(), and getfloat():
config['Training'].getfloat('learning_rate')
:param other_gpu_config_file: path to configuration file
:type other_gpu_config_file: str
:return: a dict of dicts mirroring the config file sections/entries
:rtype: dict[dict]
:raises ValueErr
:raises TypeError
'''
if conf_file is None:
return self.init_defaults()
config = DottableConfigParser(conf_file)
if len(config.sections()) == 0:
# Config file exists, but empty:
return (self.init_defaults(config))
# Do type conversion also in other entries that
# are standard:
types = {
'epochs': int,
'batch_size': int,
'kernel_size': int,
'sample_width': int,
'sample_height': int,
'seed': int,
'pytorch_comm_port': int,
'num_pretrained_layers': int,
'root_train_test_data': str,
'net_name': str,
}
for section in config.sections():
for attr_name in config[section].keys():
try:
str_val = config[section][attr_name]
required_type = types[attr_name]
config[section][attr_name] = required_type(str_val)
except KeyError:
# Current attribute is not standard;
# users of the corresponding value need
# to do their own type conversion when
# accessing this configuration entry:
continue
except TypeError:
raise ValueError(
f"Config file error: {section}.{attr_name} should be convertible to {required_type}"
)
return config
#------------------------------------
# set_seed
#-------------------
def set_seed(self, seed):
'''
Set the seed across all different necessary platforms
to allow for comparison of different models and runs
:param seed: random seed to set for all random num generators
:type seed: int
'''
torch.manual_seed(seed)
cuda.manual_seed_all(seed)
# Not totally sure what these two do!
torch.backends.cudnn.deterministic = True
torch.backends.cudnn.benchmark = False
np.random.seed(seed)
os.environ['PYTHONHASHSEED'] = str(seed)
random.seed(seed)
#------------------------------------
# time_delta_str
#-------------------
def time_delta_str(self, epoch_delta, granularity=2):
'''
Takes the difference between two datetime times:
start_time = datetime.datetime.now()
<some time elapses>
end_time = datetime.datetime.now()
delta = end_time - start_time
time_delta_str(delta
Depending on granularity, returns a string like:
Granularity:
1 '160.0 weeks'
2 '160.0 weeks, 4.0 days'
3 '160.0 weeks, 4.0 days, 6.0 hours'
4 '160.0 weeks, 4.0 days, 6.0 hours, 42.0 minutes'
5 '160.0 weeks, 4.0 days, 6.0 hours, 42.0 minutes, 13.0 seconds'
For smaller time deltas, such as 10 seconds,
does not include leading zero times. For
any granularity:
'10.0 seconds'
If duration is less than second, returns '< 1sec>'
:param epoch_delta:
:type epoch_delta:
:param granularity:
:type granularity:
'''
intervals = (
('weeks', 604800), # 60 * 60 * 24 * 7
('days', 86400), # 60 * 60 * 24
('hours', 3600), # 60 * 60
('minutes', 60),
('seconds', 1),
)
secs = epoch_delta.total_seconds()
result = []
for name, count in intervals:
value = secs // count
if value:
secs -= value * count
if value == 1:
name = name.rstrip('s')
result.append("{} {}".format(value, name))
dur_str = ', '.join(result[:granularity])
if len(dur_str) == 0:
dur_str = '< 1sec>'
return dur_str
#------------------------------------
# step_number
#-------------------
def step_number(self, epoch, split_num, num_folds):
'''
Combines an epoch with a split number into
a single integer series as epochs increase,
and split_num cycles from 0 to num_folds.
:param epoch: epoch to encode
:type epoch: int
:param split_num: split number to encode
:type split_num: int
:param num_folds: number of folds for CV splitting
must be contant!
:type num_folds: int
:return: an integer the combines epoch and split-num
:rtype: int
'''
step_num = epoch * num_folds + split_num
return step_num
#------------------------------------
# cleanup
#-------------------
def cleanup(self):
'''
Recover resources taken by collaborating
processes. OK to call multiple times.
'''
# self.clear_gpu()
try:
self.writer.close()
except Exception as e:
self.log.err(f"Could not close tensorboard writer: {repr(e)}")
class Inferencer:
'''
classdocs
'''
#------------------------------------
# Constructor
#-------------------
def __init__(self,
model_paths,
samples_path,
batch_size=1,
labels_path=None,
gpu_ids=0):
'''
Given the path to a trained model,
and the path to the root of a set
of data, compute predictions.
If labels_path is None, the subdirectory
names between the samples_path root,
and the samples themselves are used as
the ground truth labels.
By default: run batches of size 1,
because we always have drop_last set
to True. For small test sets leaving
out any data at all isn't good. Caller
can still set batch_size higher to gain
speed if the testset is very large, so that
not inferencing on up to batch_size - 1
samples is OK
:param model_paths:
:type model_paths:
:param samples_path:
:type samples_path:
:param batch_size:
:type batch_size:
:param labels_path:
:type labels_path:
:param gpu_ids: Device number of GPU, in case
one is available
:type gpu_ids: {int | [int]}
'''
self.model_paths = model_paths
self.samples_path = samples_path
self.labels_path = labels_path
self.gpu_ids = gpu_ids if type(gpu_ids) == list else [gpu_ids]
if batch_size is not None:
self.batch_size = batch_size
else:
self.batch_size = 1
self.IMG_EXTENSIONS = FileUtils.IMG_EXTENSIONS
self.log = LoggingService()
self.curr_dir = os.path.dirname(__file__)
#------------------------------------
# prep_model_inference
#-------------------
def prep_model_inference(self, model_path):
'''
1. Parses model_path into its components, and
creates a dict: self.model_props, which
contains the network type, grayscale or not,
whether pretrained, etc.
2. Creates self.csv_writer to write results measures
into csv files. The destination file is determined
as follows:
<script_dir>/runs_raw_inferences/inf_csv_results_<datetime>/<model-props-derived-fname>.csv
3. Creates self.writer(), a tensorboard writer with destination dir:
<script_dir>/runs_inferences/inf_results_<datetime>
4. Creates an ImageFolder classed dataset to self.samples_path
5. Creates a shuffling DataLoader
6. Initializes self.num_classes and self.class_names
7. Creates self.model from the passed-in model_path name
:param model_path: path to model that will be used for
inference by this instance of Inferencer
:type model_path: str
'''
model_fname = os.path.basename(model_path)
# Extract model properties
# from the model filename:
self.model_props = FileUtils.parse_filename(model_fname)
csv_results_root = os.path.join(self.curr_dir, 'runs_raw_inferences')
#self.csv_dir = os.path.join(csv_results_root, f"inf_csv_results_{uuid.uuid4().hex}")
ts = FileUtils.file_timestamp()
self.csv_dir = os.path.join(csv_results_root, f"inf_csv_results_{ts}")
os.makedirs(self.csv_dir, exist_ok=True)
csv_file_nm = FileUtils.construct_filename(self.model_props,
prefix='inf',
suffix='.csv',
incl_date=True)
csv_path = os.path.join(self.csv_dir, csv_file_nm)
self.csv_writer = CSVWriterCloseable(csv_path)
ts = FileUtils.file_timestamp()
tensorboard_root = os.path.join(self.curr_dir, 'runs_inferences')
tensorboard_dest = os.path.join(tensorboard_root, f"inf_results_{ts}")
#f"inf_results_{ts}{uuid.uuid4().hex}")
os.makedirs(tensorboard_dest, exist_ok=True)
self.writer = SummaryWriterPlus(log_dir=tensorboard_dest)
dataset = SingleRootImageDataset(
self.samples_path, to_grayscale=self.model_props['to_grayscale'])
# Make reproducible:
Utils.set_seed(42)
#********Utils.set_seed(56)
self.loader = DataLoader(dataset,
batch_size=self.batch_size,
shuffle=True,
drop_last=True)
self.class_names = dataset.class_names()
self.num_classes = len(self.class_names)
# Get the right type of model,
# Don't bother getting it pretrained,
# of freezing it, b/c we will overwrite
# the weights:
self.model = NetUtils.get_net(
self.model_props['net_name'],
num_classes=self.num_classes,
pretrained=False,
freeze=0,
to_grayscale=self.model_props['to_grayscale'])
self.log.info(f"Tensorboard info written to {tensorboard_dest}")
self.log.info(f"Result measurement CSV file(s) written to {csv_path}")
#------------------------------------
# __call__
#-------------------
def __call__(self, gpu_id_model_path_pair):
gpu_id, self.model_path = gpu_id_model_path_pair
self.prep_model_inference(self.model_path)
self.log.info(
f"Begining inference with model {FileUtils.ellipsed_file_path(self.model_path)} on gpu_id {gpu_id}"
)
#****************
#return self.run_inference(gpu_to_use=gpu_id)
dicts_from_runs = []
for i in range(3):
self.curr_dict = {}
dicts_from_runs.append(self.curr_dict)
self.run_inference(gpu_to_use=gpu_id)
print(dicts_from_runs)
#****************
#------------------------------------
# go
#-------------------
def go(self):
# Pair models to GPUs; example for
# self.gpu_ids == [0,4], and three models:
# [(gpu0, model0) (gpu4, model1), (gpu0, model3)]
repeats = int(np.ceil(len(self.model_paths) / len(self.gpu_ids)))
gpu_model_pairings = list(zip(self.gpu_ids * repeats,
self.model_paths))
#************* No parallelism for debugging
self(gpu_model_pairings[0])
return
#************* END No parallelism for debugging
with Pool(len(self.gpu_ids)) as inf_pool:
# Run as many inferences in parallel as
# there are models to try. The first arg,
# (self): means to invoke the __call__() method
# on self.
result_it = inf_pool.imap(self,
gpu_model_pairings,
chunksize=len(self.gpu_ids))
results = [res.get() for res in result_it]
print(f"******Results: {results}")
#------------------------------------
# run_inferencer
#-------------------
def run_inference(self, gpu_to_use=0):
'''
Runs model over dataloader. Along
the way: creates ResultTally for each
batch, and maintains dict instance variable
self.raw_results for later conversion of
logits to class IDs under different threshold
assumptions.
self.raw_results:
{'all_outputs' : <arr>,
'all_labels' : <arr>
}
Returns a ResultCollection with the
ResultTally instances of each batch.
:param gpu_to_use: which GPU to deploy to (if it is available)
:type gpu_to_use: int
:return: collection of tallies, one for each batch,
or None if something went wrong.
:rtype: {None | ResultCollection}
'''
# Just in case the loop never runs:
batch_num = -1
overall_start_time = datetime.datetime.now()
try:
try:
if torch.cuda.is_available():
self.model.load_state_dict(torch.load(self.model_path))
FileUtils.to_device(self.model, 'gpu', gpu_to_use)
else:
self.model.load_state_dict(
torch.load(self.model_path,
map_location=torch.device('cpu')))
except RuntimeError as e:
emsg = repr(e)
if emsg.find("size mismatch for conv1") > -1:
emsg += " Maybe model was trained with to_grayscale=False, but local net created for grayscale?"
raise RuntimeError(emsg) from e
loss_fn = nn.CrossEntropyLoss()
result_coll = ResultCollection()
# Save all per-class logits for ability
# later to use different thresholds for
# conversion to class IDs:
all_outputs = []
all_labels = []
self.model.eval()
num_test_samples = len(self.loader.dataset)
self.log.info(
f"Begin inference ({num_test_samples} test samples)...")
samples_processed = 0
loop_start_time = overall_start_time
with torch.no_grad():
for batch_num, (batch, targets) in enumerate(self.loader):
if torch.cuda.is_available():
images = FileUtils.to_device(batch, 'gpu')
labels = FileUtils.to_device(targets, 'gpu')
else:
images = batch
labels = targets
outputs = self.model(images)
loss = loss_fn(outputs, labels)
images = FileUtils.to_device(images, 'cpu')
outputs = FileUtils.to_device(outputs, 'cpu')
labels = FileUtils.to_device(labels, 'cpu')
loss = FileUtils.to_device(loss, 'cpu')
#**********
max_logit = outputs[0].max().item()
max_idx = (outputs.squeeze() == max_logit).nonzero(
as_tuple=False).item()
smpl_id = torch.utils.data.dataloader.sample_id_seq[-1]
lbl = labels[0].item()
pred_cl = max_idx
self.curr_dict[smpl_id] = (smpl_id, lbl, pred_cl)
#**********
# Specify the batch_num in place
# of an epoch, which is not applicatble
# during testing:
tally = ResultTally(batch_num, LearningPhase.TESTING,
outputs, labels, loss,
self.num_classes, self.batch_size)
result_coll.add(tally, step=None)
all_outputs.append(outputs)
all_labels.append(labels)
samples_processed += len(labels)
del images
del outputs
del labels
del loss
torch.cuda.empty_cache()
time_now = datetime.datetime.now()
# Sign of life every 6 seconds:
if (time_now - loop_start_time).seconds >= 5:
self.log.info(
f"GPU{gpu_to_use} processed {samples_processed}/{num_test_samples} samples"
)
loop_start_time = time_now
finally:
#*********
print(f"Sample seq: {torch.utils.data.dataloader.sample_id_seq}")
torch.utils.data.dataloader.sample_id_seq = []
#*********
time_now = datetime.datetime.now()
test_time_duration = time_now - overall_start_time
# A human readable duration st down to minutes:
duration_str = FileUtils.time_delta_str(test_time_duration,
granularity=4)
self.log.info(
f"Done with inference: {samples_processed} test samples; {duration_str}"
)
# Total number of batches we ran:
num_batches = 1 + batch_num # b/c of zero-base
# If loader delivered nothing, the loop
# never ran; warn, and get out:
if num_batches == 0:
self.log.warn(
f"Dataloader delivered no data from {self.samples_path}")
self.close()
return None
# Var all_outputs is now:
# [tensor([pred_cl0, pred_cl1, pred_cl<num_classes - 1>], # For sample0
# tensor([pred_cl0, pred_cl1, pred_cl<num_classes - 1>], # For sample1
# ...
# ]
# Make into one tensor: (num_batches, batch_size, num_classes),
# unless an exception was raised at some point,
# throwing us into this finally clause:
if len(all_outputs) == 0:
self.log.info(
f"No outputs were produced; thus no results to report")
return None
self.all_outputs_tn = torch.stack(all_outputs)
# Be afraid...be very afraid:
assert(self.all_outputs_tn.shape == \
torch.Size([num_batches,
self.batch_size,
self.num_classes])
)
# Var all_labels is now num-batches tensors,
# each containing batch_size labels:
assert (len(all_labels) == num_batches)
# list of single-number tensors. Make
# into one tensor:
self.all_labels_tn = torch.stack(all_labels)
assert(self.all_labels_tn.shape == \
torch.Size([num_batches, self.batch_size])
)
# And equivalently:
assert(self.all_labels_tn.shape == \
(self.all_outputs_tn.shape[0],
self.all_outputs_tn.shape[1]
)
)
self.report_results(result_coll)
self.close()
return result_coll
#------------------------------------
# report_results
#-------------------
def report_results(self, tally_coll):
self._report_textual_results(tally_coll, self.csv_dir)
self._report_conf_matrix(tally_coll, show_in_tensorboard=True)
self._report_charted_results()
#------------------------------------
# _report_conf_matrix
#-------------------
def _report_conf_matrix(self,
tally_coll,
show=True,
show_in_tensorboard=None):
'''
Computes the confusion matrix CM from tally collection.
Creates an image from CM, and displays it via matplotlib,
if show arg is True. If show_in_tensorboard is a Tensorboard
SummaryWriter instance, the figure is posted to tensorboard,
no matter the value of the show arg.
Returns the Figure object.
:param tally_coll: all ResultTally instances to be included
in the confusion matrix
:type tally_coll: result_tallying.ResultCollection
:param show: whether or not to call show() on the
confusion matrix figure, or only return the Figure instance
:type show: bool
:param show_in_tensorboard: whether or not to post the image
to tensorboard
:type show_in_tensorboard: bool
:return: Figure instance containing confusion matrix heatmap
with color legend.
:rtype: matplotlib.pyplot.Figure
'''
all_preds = []
all_labels = []
for tally in tally_coll.tallies(phase=LearningPhase.TESTING):
all_preds.extend(tally.preds)
all_labels.extend(tally.labels)
conf_matrix = Charter.compute_confusion_matrix(all_labels,
all_preds,
self.class_names,
normalize=True)
# Normalization in compute_confusion_matrix() is
# to 0-1. Turn those values into percentages:
conf_matrix_perc = (100 * conf_matrix).astype(int)
# Decide whether or not to write
# confusion cell values into the cells.
# The decision depends on how many species
# are represented in the conf matrix; too many,
# and having numbers in all cells is too cluttered:
if len(self.class_names
) > CELL_LABELING.CONF_MATRIX_CELL_LABEL_LIMIT.value:
write_in_fields = CELL_LABELING.DIAGONAL
else:
write_in_fields = CELL_LABELING.ALWAYS
fig = Charter.fig_from_conf_matrix(
conf_matrix_perc,
supertitle='Confusion Matrix\n',
subtitle='Normalized to percentages',
write_in_fields=write_in_fields)
if show_in_tensorboard:
self.writer.add_figure('Inference Confusion Matrix',
fig,
global_step=0)
if show:
# Something above makes fig lose its
# canvas manager. Add that back in:
Utils.add_pyplot_manager_to_fig(fig)
fig.show()
return fig
#------------------------------------
# _report_charted_results
#-------------------
def _report_charted_results(self, thresholds=None):
'''
Computes and (pyplot-)shows a set of precision-recall
curves in one plot. If precision and/or recall are
undefined (b/c of division by zero) for all curves, then
returns False, else True. If no curves are defined,
logs a warning.
:param thresholds: list of cutoff thresholds
for turning logits into class ID predictions.
If None, the default at Charters.compute_multiclass_pr_curves()
is used.
:type thresholds: [float]
:return: True if curves were computed and show. Else False
:rtype: bool
'''
# Obtain a dict of CurveSpecification instances,
# one for each class, plus the mean Average Precision
# across all curves. The dict will be keyed
# by class ID:
(all_curves_info, mAP) = \
Charter.compute_multiclass_pr_curves(
self.all_labels_tn,
self.all_outputs_tn,
thresholds
)
# Separate out the curves without
# ill defined prec, rec, or f1:
well_defined_curves = list(filter(
lambda crv_obj: not(crv_obj['undef_prec'] or\
crv_obj['undef_rec'] or\
crv_obj['undef_f1']
),
all_curves_info.values()
)
)
if len(well_defined_curves) == 0:
self.log.warn(
f"For all thresholds, one or more of precision, recall or f1 are undefined. No p/r curves to show"
)
return False
# Too many curves are clutter. Only
# show the best and worst by optimal f1:
f1_sorted = sorted(well_defined_curves,
key=lambda obj: obj['best_op_pt']['f1'])
curves_to_show = {
crv_obj['class_id']: crv_obj
for crv_obj in (f1_sorted[0], f1_sorted[-1])
}
#********** Mixup with objs blurring together
(_num_classes, fig) = \
ClassificationPlotter.chart_pr_curves(curves_to_show)
fig.show()
return True
#------------------------------------
# _report_textual_results
#-------------------
def _report_textual_results(self, tally_coll, res_dir):
'''
Give a sequence of tallies with results
from a series of batches, create long
outputs, and inputs lists from all tallies
Computes information retrieval type values:
precision (macro/micro/weighted/by-class)
recall (macro/micro/weighted/by-class)
f1 (macro/micro/weighted/by-class)
acuracy
balanced_accuracy
Combines these results into a Pandas series,
and writes them to a csv file. That file is constructed
from the passed-in res_dir, appended with 'ir_results.csv'.
Finally, constructs Github flavored tables from the
above results, and posts them to the 'text' tab of
tensorboard.
Returns the results measures Series
:param tally_coll: collect of tallies from batches
:type tally_coll: ResultCollection
:param res_dir: directory where all .csv and other
result files are to be written
:type res_dir: str
:return results of information retrieval-like measures
:rtype: pandas.Series
'''
all_preds = []
all_labels = []
for tally in tally_coll.tallies(phase=LearningPhase.TESTING):
all_preds.extend(tally.preds)
all_labels.extend(tally.labels)
res = OrderedDict({})
res['prec_macro'] = precision_score(all_labels,
all_preds,
average='macro',
zero_division=0)
res['prec_micro'] = precision_score(all_labels,
all_preds,
average='micro',
zero_division=0)
res['prec_weighted'] = precision_score(all_labels,
all_preds,
average='weighted',
zero_division=0)
res['prec_by_class'] = precision_score(all_labels,
all_preds,
average=None,
zero_division=0)
res['recall_macro'] = recall_score(all_labels,
all_preds,
average='macro',
zero_division=0)
res['recall_micro'] = recall_score(all_labels,
all_preds,
average='micro',
zero_division=0)
res['recall_weighted'] = recall_score(all_labels,
all_preds,
average='weighted',
zero_division=0)
res['recall_by_class'] = recall_score(all_labels,
all_preds,
average=None,
zero_division=0)
res['f1_macro'] = f1_score(all_labels,
all_preds,
average='macro',
zero_division=0)
res['f1_micro'] = f1_score(all_labels,
all_preds,
average='micro',
zero_division=0)
res['f1_weighted'] = f1_score(all_labels,
all_preds,
average='weighted',
zero_division=0)
res['f1_by_class'] = f1_score(all_labels,
all_preds,
average=None,
zero_division=0)
res['accuracy'] = accuracy_score(all_labels, all_preds)
res['balanced_accuracy'] = balanced_accuracy_score(
all_labels, all_preds)
res_series = pd.Series(list(res.values()), index=list(res.keys()))
# Write information retrieval type results
# to a one-line .csv file, using pandas Series
# as convenient intermediary:
res_csv_path = os.path.join(res_dir, 'ir_results.csv')
res_series.to_csv(res_csv_path)
res_rnd = {}
for meas_nm, meas_val in res.items():
# Measure results are either floats (precision, recall, etc.),
# or np arrays (e.g. precision-per-class). For both
# cases, round each measure to one digit:
res_rnd[meas_nm] = round(meas_val,1) if type(meas_val) == float \
else meas_val.round(1)
ir_measures_skel = {
'col_header': ['precision', 'recall', 'f1'],
'row_labels': ['macro', 'micro', 'weighted'],
'rows': [[
res_rnd['prec_macro'], res_rnd['recall_macro'],
res_rnd['f1_macro']
],
[
res_rnd['prec_micro'], res_rnd['recall_micro'],
res_rnd['f1_micro']
],
[
res_rnd['prec_weighted'], res_rnd['recall_weighted'],
res_rnd['f1_weighted']
]]
}
ir_per_class_rows = [[
prec_class, recall_class, f1_class
] for prec_class, recall_class, f1_class in zip(
res_rnd['prec_by_class'], res_rnd['recall_by_class'],
res_rnd['f1_by_class'])]
ir_by_class_skel = {
'col_header': ['precision', 'recall', 'f1'],
'row_labels': self.class_names,
'rows': ir_per_class_rows
}
accuracy_skel = {
'col_header': ['accuracy', 'balanced_accuracy'],
'row_labels': ['Overall'],
'rows': [[res_rnd['accuracy'], res_rnd['balanced_accuracy']]]
}
ir_measures_tbl = GithubTableMaker.make_table(ir_measures_skel,
sep_lines=False)
ir_by_class_tbl = GithubTableMaker.make_table(ir_by_class_skel,
sep_lines=False)
accuracy_tbl = GithubTableMaker.make_table(accuracy_skel,
sep_lines=False)
# Write the markup tables to Tensorboard:
self.writer.add_text('Information retrieval measures',
ir_measures_tbl,
global_step=0)
self.writer.add_text('Per class measures',
ir_by_class_tbl,
global_step=0)
self.writer.add_text('Accuracy', accuracy_tbl, global_step=0)
return res_series
#------------------------------------
# close
#-------------------
def close(self):
try:
self.writer.close()
except Exception as e:
self.log.err(f"Could not close tensorboard writer: {repr(e)}")
def build_basic_tensorboard_info(cls):
'''
Create two experiments. Within each, place
values tagged loss/train, loss/val. Dir struct
on return:
tb_root
Exp1
1-file
Exp2
1-file
'''
exp1_dir = os.path.join(cls.tensorboard_dir, 'Exp1')
exp2_dir = os.path.join(cls.tensorboard_dir, 'Exp2')
writer1 = SummaryWriterPlus(exp1_dir)
writer2 = SummaryWriterPlus(exp2_dir)
for epoch in range(5):
val1 = epoch + 1
val2 = epoch + 2
writer1.add_scalar('loss/train', val1, epoch)
writer1.add_scalar('loss/val', val1 - 0.5, epoch)
writer2.add_scalar('loss/train', val2, epoch)
writer2.add_scalar('loss/val', val2 - 0.5, epoch)
return writer1, writer2
def prep_model_inference(self, model_path):
'''
1. Parses model_path into its components, and
creates a dict: self.model_props, which
contains the network type, grayscale or not,
whether pretrained, etc.
2. Creates self.csv_writer to write results measures
into csv files. The destination file is determined
as follows:
<script_dir>/runs_raw_inferences/inf_csv_results_<datetime>/<model-props-derived-fname>.csv
3. Creates self.writer(), a tensorboard writer with destination dir:
<script_dir>/runs_inferences/inf_results_<datetime>
4. Creates an ImageFolder classed dataset to self.samples_path
5. Creates a shuffling DataLoader
6. Initializes self.num_classes and self.class_names
7. Creates self.model from the passed-in model_path name
:param model_path: path to model that will be used for
inference by this instance of Inferencer
:type model_path: str
'''
model_fname = os.path.basename(model_path)
# Extract model properties
# from the model filename:
self.model_props = FileUtils.parse_filename(model_fname)
csv_results_root = os.path.join(self.curr_dir, 'runs_raw_inferences')
#self.csv_dir = os.path.join(csv_results_root, f"inf_csv_results_{uuid.uuid4().hex}")
ts = FileUtils.file_timestamp()
self.csv_dir = os.path.join(csv_results_root, f"inf_csv_results_{ts}")
os.makedirs(self.csv_dir, exist_ok=True)
csv_file_nm = FileUtils.construct_filename(self.model_props,
prefix='inf',
suffix='.csv',
incl_date=True)
csv_path = os.path.join(self.csv_dir, csv_file_nm)
self.csv_writer = CSVWriterCloseable(csv_path)
ts = FileUtils.file_timestamp()
tensorboard_root = os.path.join(self.curr_dir, 'runs_inferences')
tensorboard_dest = os.path.join(tensorboard_root, f"inf_results_{ts}")
#f"inf_results_{ts}{uuid.uuid4().hex}")
os.makedirs(tensorboard_dest, exist_ok=True)
self.writer = SummaryWriterPlus(log_dir=tensorboard_dest)
dataset = SingleRootImageDataset(
self.samples_path, to_grayscale=self.model_props['to_grayscale'])
# Make reproducible:
Utils.set_seed(42)
#********Utils.set_seed(56)
self.loader = DataLoader(dataset,
batch_size=self.batch_size,
shuffle=True,
drop_last=True)
self.class_names = dataset.class_names()
self.num_classes = len(self.class_names)
# Get the right type of model,
# Don't bother getting it pretrained,
# of freezing it, b/c we will overwrite
# the weights:
self.model = NetUtils.get_net(
self.model_props['net_name'],
num_classes=self.num_classes,
pretrained=False,
freeze=0,
to_grayscale=self.model_props['to_grayscale'])
self.log.info(f"Tensorboard info written to {tensorboard_dest}")
self.log.info(f"Result measurement CSV file(s) written to {csv_path}")