def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.bootloader
self.intf = anaconda.intf
self.driveorder = self.bl.drivelist
if len(self.driveorder) == 0:
partitioned = anaconda.storage.partitioned
disks = anaconda.storage.disks
self.driveorder = [d.name for d in disks if d in partitioned]
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
thebox = gtk.VBox(False, 12)
thebox.set_border_width(18)
# make sure we get a valid device to say we're installing to
if self.bl.getDevice() is not None:
self.bldev = self.bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = anaconda.platform.bootloaderChoices(self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
hb = gtk.HBox(False, 12)
self.grubCB = gtk.CheckButton(
_("_Install boot loader on /dev/%s.") % (self.bldev, ))
self.grubCB.set_active(
not self.dispatch.stepInSkipList("instbootloader"))
self.grubCB.connect("toggled", self.bootloaderChanged)
hb.pack_start(self.grubCB, False)
self.deviceButton = gtk.Button(_("_Change device"))
self.deviceButton.connect("clicked", self._deviceChange, anaconda)
hb.pack_start(self.deviceButton, False)
thebox.pack_start(hb, False)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
thebox.pack_start(self.blpass.getWidget(), False)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent)
# XXX: lxnay here, GRUB-2 doesn't allow this
# thebox.pack_end(self.oslist.getWidget(), True)
self.bootloaderChanged()
return thebox
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.id.bootloader
self.intf = anaconda.intf
self.driveorder = self.bl.drivelist
if len(self.driveorder) == 0:
partitioned = anaconda.id.storage.partitioned
disks = anaconda.id.storage.disks
self.driveorder = [d.name for d in disks if d in partitioned]
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
thebox = gtk.VBox (False, 12)
thebox.set_border_width(18)
# make sure we get a valid device to say we're installing to
if self.bl.getDevice() is not None:
self.bldev = self.bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = anaconda.platform.bootloaderChoices(self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
hb = gtk.HBox(False, 12)
self.grubCB = gtk.CheckButton(_("_Install boot loader on /dev/%s.") %
(self.bldev,))
self.grubCB.set_active(not self.dispatch.stepInSkipList("instbootloader"))
self.grubCB.connect("toggled", self.bootloaderChanged)
hb.pack_start(self.grubCB, False)
# no "Change device" button on EFI systems, since there should only
# be one EFI System Partition available/usable
self.deviceButton = None
if not iutil.isEfi():
self.deviceButton = gtk.Button(_("_Change device"))
self.deviceButton.connect("clicked", self._deviceChange, anaconda)
hb.pack_start(self.deviceButton, False)
thebox.pack_start(hb, False)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
thebox.pack_start(self.blpass.getWidget(), False)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent)
thebox.pack_end(self.oslist.getWidget(), True)
self.bootloaderChanged()
return thebox
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.bootloader
self.intf = anaconda.intf
self.driveorder = [d.name for d in self.bl.drives]
thebox = gtk.VBox (False, 12)
thebox.set_border_width(18)
# make sure we get a valid device to say we're installing to
self.bldev = self.bl.stage1_device
hb = gtk.HBox(False, 12)
self.grubCB = gtk.CheckButton(_("_Install boot loader on %s.") %
(self.bldev.path,))
self.grubCB.set_active(self.dispatch.step_enabled("instbootloader"))
self.grubCB.connect("toggled", self.bootloaderChanged)
hb.pack_start(self.grubCB, False)
# no "Change device" button on EFI systems, since there should only
# be one EFI System Partition available/usable
self.deviceButton = None
if not iutil.isEfi():
self.deviceButton = gtk.Button(_("_Change device"))
self.deviceButton.connect("clicked", self._deviceChange, anaconda)
hb.pack_start(self.deviceButton, False)
thebox.pack_start(hb, False)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
thebox.pack_start(self.blpass.getWidget(), False)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent)
if not self.bl.name == "GRUB2":
# with grub2 we use os-prober to generate menu entries for all
# other OS it finds without user interaction
thebox.pack_end(self.oslist.getWidget(), True)
self.bootloaderChanged()
return thebox
class MainBootloaderWindow(InstallWindow):
windowTitle = N_("Boot Loader Configuration")
def __init__(self, ics):
InstallWindow.__init__(self, ics)
self.parent = ics.getICW().window
def getPrev(self):
pass
def getNext(self):
# go ahead and set the device even if we already knew it
# since that won't change anything
self.bl.setDevice(self.bldev)
self.bl.drivelist = self.driveorder
if not self.grubCB.get_active():
# if we're not installing a boot loader, don't show the second
# screen and don't worry about other options
self.dispatch.skipStep("instbootloader", skip=1)
# kind of a hack...
self.bl.defaultDevice = None
return
else:
self.dispatch.skipStep("instbootloader", skip=0)
self.bl.setUseGrub(1)
# set the password
self.bl.setPassword(self.blpass.getPassword(), isCrypted=0)
# set the bootloader images based on what's in our list
self.oslist.setBootloaderImages()
def bootloaderChanged(self, *args):
active = self.grubCB.get_active()
for widget in [
self.oslist.getWidget(),
self.blpass.getWidget(), self.deviceButton
]:
widget.set_sensitive(active)
def _deviceChange(self, b, anaconda, *args):
def __driveChange(combo, dxml, choices):
if not choices.has_key("mbr"):
return
iter = combo.get_active_iter()
if not iter:
return
first = combo.get_model()[iter][1]
desc = choices["mbr"][1]
dxml.get_widget("mbrRadio").set_label("%s - /dev/%s" %
(_(desc), first))
dxml.get_widget("mbrRadio").set_data("bootDevice", first)
def __genStore(combo, disks, active):
model = gtk.TreeStore(gobject.TYPE_STRING, gobject.TYPE_STRING)
combo.set_model(model)
cell = gtk.CellRendererText()
combo.pack_start(cell, True)
combo.set_attributes(cell, text=0)
for disk in disks:
i = model.append(None)
model[i] = ("%s %8.0f MB %s" %
(disk.name, disk.size, disk.description),
"%s" % (disk.name, ))
if disk.name == active:
combo.set_active_iter(i)
return model
(dxml, dialog) = gui.getGladeWidget("blwhere.glade", "blwhereDialog")
gui.addFrame(dialog)
dialog.set_transient_for(self.parent)
dialog.show()
choices = anaconda.platform.bootloaderChoices(self.bl)
for t in ("mbr", "boot"):
if not choices.has_key(t):
continue
(device, desc) = choices[t]
w = dxml.get_widget("%sRadio" % (t, ))
w.set_label("%s - /dev/%s" % (_(desc), device))
w.show()
if self.bldev == device:
w.set_active(True)
else:
w.set_active(False)
w.set_data("bootDevice", device)
for i in range(1, 5):
if len(self.driveorder) < i:
break
combo = dxml.get_widget("bd%dCombo" % (i, ))
lbl = dxml.get_widget("bd%dLabel" % (i, ))
combo.show()
lbl.show()
partitioned = anaconda.storage.partitioned
disks = anaconda.storage.disks
bl_disks = [d for d in disks if d in partitioned]
m = __genStore(combo, bl_disks, self.driveorder[i - 1])
dxml.get_widget("bd1Combo").connect("changed", __driveChange, dxml,
choices)
__driveChange(dxml.get_widget("bd1Combo"), dxml, choices)
while 1:
rc = dialog.run()
if rc in [gtk.RESPONSE_CANCEL, gtk.RESPONSE_DELETE_EVENT]:
break
# set the boot device based on what they chose
if dxml.get_widget("bootRadio").get_active():
self.bldev = dxml.get_widget("bootRadio").get_data(
"bootDevice")
elif dxml.get_widget("mbrRadio").get_active():
self.bldev = dxml.get_widget("mbrRadio").get_data("bootDevice")
else:
raise RuntimeError, "No radio button selected!"
# and adjust the boot order
neworder = []
for i in range(1, 5):
if len(self.driveorder) < i:
break
combo = dxml.get_widget("bd%dCombo" % (i, ))
iter = combo.get_active_iter()
if not iter:
continue
act = combo.get_model()[iter][1]
if act not in neworder:
neworder.append(act)
for d in self.driveorder:
if d not in neworder:
neworder.append(d)
self.driveorder = neworder
break
dialog.destroy()
self.grubCB.set_label(
_("_Install boot loader on /dev/%s.") % (self.bldev, ))
return rc
def _setBLCBText(self):
self.grubCB.set_label(
_("_Install boot loader on /dev/%s.") % (self.bldev, ))
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.bootloader
self.intf = anaconda.intf
self.driveorder = self.bl.drivelist
if len(self.driveorder) == 0:
partitioned = anaconda.storage.partitioned
disks = anaconda.storage.disks
self.driveorder = [d.name for d in disks if d in partitioned]
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
thebox = gtk.VBox(False, 12)
thebox.set_border_width(18)
# make sure we get a valid device to say we're installing to
if self.bl.getDevice() is not None:
self.bldev = self.bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = anaconda.platform.bootloaderChoices(self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
hb = gtk.HBox(False, 12)
self.grubCB = gtk.CheckButton(
_("_Install boot loader on /dev/%s.") % (self.bldev, ))
self.grubCB.set_active(
not self.dispatch.stepInSkipList("instbootloader"))
self.grubCB.connect("toggled", self.bootloaderChanged)
hb.pack_start(self.grubCB, False)
self.deviceButton = gtk.Button(_("_Change device"))
self.deviceButton.connect("clicked", self._deviceChange, anaconda)
hb.pack_start(self.deviceButton, False)
thebox.pack_start(hb, False)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
thebox.pack_start(self.blpass.getWidget(), False)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent)
# XXX: lxnay here, GRUB-2 doesn't allow this
# thebox.pack_end(self.oslist.getWidget(), True)
self.bootloaderChanged()
return thebox
class MainBootloaderWindow(InstallWindow):
windowTitle = N_("Boot Loader Configuration")
htmlTag = "bootloader"
def __init__(self, ics):
InstallWindow.__init__(self, ics)
self.parent = ics.getICW().window
def getPrev(self):
pass
def getNext(self):
# go ahead and set the device even if we already knew it
# since that won't change anything
self.bl.setDevice(self.bldev)
if self.blname is None:
# if we're not installing a boot loader, don't show the second
# screen and don't worry about other options
self.dispatch.skipStep("instbootloader", skip=1)
self.dispatch.skipStep("bootloaderadvanced", skip=1)
# kind of a hack...
self.bl.defaultDevice = None
return
else:
self.dispatch.skipStep("instbootloader", skip=0)
if self.blname == "GRUB":
self.bl.setUseGrub(1)
else:
self.bl.setUseGrub(0)
# set the password
self.bl.setPassword(self.blpass.getPassword(), isCrypted=0)
# set the bootloader images based on what's in our list
self.oslist.setBootloaderImages()
if self.advanced.get_active():
self.dispatch.skipStep("bootloaderadvanced", skip=0)
else:
self.dispatch.skipStep("bootloaderadvanced", skip=1)
def changeBootloaderCallback(self, *args):
dialog = gtk.Dialog(_("Change Boot Loader"), self.parent)
dialog.add_button('gtk-cancel', 2)
dialog.add_button('gtk-ok', 1)
dialog.set_position(gtk.WIN_POS_CENTER)
gui.addFrame(dialog)
radio_vbox = self.setupChooseBootloaderRadioBox()
dialog.vbox.pack_start(radio_vbox)
dialog.show_all()
blname = self.blname
while 1:
rc = dialog.run()
if rc == 2:
break
if self.none_radio.get_active() == gtk.TRUE:
newrc = self.intf.messageWindow(_("Warning"),
_("You have selected not to "
"install a boot loader on "
"your system. You will "
"have to create a boot "
"disk to boot your system "
"with this option.\n\n"
"Would you like to "
"continue and not install "
"a boot loader?"),
type="custom",
custom_buttons=[
_("Cancel"),
_("C_ontinue with no boot "
"loader")
])
if newrc != 1:
continue
blname = None
elif ((self.lilo_radio is not None)
and (self.lilo_radio.get_active() == gtk.TRUE)):
blname = "LILO"
else:
blname = "GRUB"
break
dialog.destroy()
if rc != 2:
self.blname = blname
self.updateBootLoaderLabel()
if blname is not None:
self.oslist.changeBootLoader(blname)
return rc
def setupChooseBootloaderRadioBox(self):
radio_vbox = gtk.VBox(gtk.FALSE, 2)
radio_vbox.set_border_width(5)
label = gui.WrappingLabel(
_("Please select the boot loader that "
"the computer will use. GRUB is the "
"default boot loader. However, if you "
"do not wish to overwrite your current "
"boot loader, select \"Do not install "
"a boot loader.\" "))
label.set_alignment(0.0, 0.0)
self.grub_radio = gtk.RadioButton(None, (_("Use _GRUB as the "
"boot loader")))
if bootloader.showLilo:
self.lilo_radio = gtk.RadioButton(self.grub_radio,
(_("Use _LILO as the boot "
"loader")))
else:
self.lilo_radio = None
self.none_radio = gtk.RadioButton(self.grub_radio, (_("_Do not "
"install a "
"boot loader")))
radio_vbox.pack_start(label, gtk.FALSE)
radio_vbox.pack_start(self.grub_radio, gtk.FALSE)
if self.lilo_radio:
radio_vbox.pack_start(self.lilo_radio, gtk.FALSE)
radio_vbox.pack_start(self.none_radio, gtk.FALSE)
if self.blname is None:
self.none_radio.set_active(gtk.TRUE)
elif self.lilo_radio is not None and self.blname == "LILO" and iutil.getArch(
) == "i386":
self.lilo_radio.set_active(gtk.TRUE)
else:
self.grub_radio.set_active(gtk.TRUE)
return radio_vbox
def updateBootLoaderLabel(self):
if self.blname is not None:
self.bllabel.set_text(
_("The %s boot loader will be "
"installed on /dev/%s.") % (self.blname, self.bldev))
active = gtk.TRUE
else:
self.bllabel.set_text(_("No boot loader will be installed."))
active = gtk.FALSE
for widget in [
self.oslist.getWidget(),
self.blpass.getWidget(), self.advanced
]:
widget.set_sensitive(active)
def getScreen(self, dispatch, bl, fsset, diskSet):
self.dispatch = dispatch
self.bl = bl
self.intf = dispatch.intf
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
thebox = gtk.VBox(gtk.FALSE, 10)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, gtk.FALSE)
if self.bl.useGrub():
self.blname = "GRUB"
else:
self.blname = "LILO"
# XXX this is kind of ugly
if self.dispatch.stepInSkipList("instbootloader"):
self.blname = None
# make sure we get a valid device to say we're installing to
if bl.getDevice() is not None:
self.bldev = bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = fsset.bootloaderChoices(diskSet, self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
self.bllabel = gui.WrappingLabel("")
self.bllabel.set_alignment(0.0, 0.5)
hbox = gtk.HBox(gtk.FALSE, 10)
hbox.pack_start(self.bllabel, gtk.FALSE)
button = gtk.Button(_("_Change boot loader"))
hbox.pack_start(button, gtk.FALSE)
button.connect("clicked", self.changeBootloaderCallback)
alignment = gtk.Alignment()
alignment.set(0.1, 0, 0, 0)
alignment.add(hbox)
thebox.pack_start(alignment, gtk.FALSE)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, gtk.FALSE)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(bl, fsset, diskSet, self.parent, self.intf,
self.blname)
thebox.pack_start(self.oslist.getWidget(), gtk.FALSE)
thebox.pack_start(gtk.HSeparator(), gtk.FALSE)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(bl, self.parent, self.intf)
thebox.pack_start(self.blpass.getWidget(), gtk.FALSE)
thebox.pack_start(gtk.HSeparator(), gtk.FALSE)
# check box to control showing the advanced screen
self.advanced = gtk.CheckButton(
_("Configure advanced boot loader "
"_options"))
if dispatch.stepInSkipList("bootloaderadvanced"):
self.advanced.set_active(gtk.FALSE)
else:
self.advanced.set_active(gtk.TRUE)
thebox.pack_start(self.advanced, gtk.FALSE)
# finally, update the label and activate widgets appropriately
self.updateBootLoaderLabel()
return thebox
def getScreen(self, dispatch, bl, fsset, diskSet):
self.dispatch = dispatch
self.bl = bl
self.intf = dispatch.intf
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
thebox = gtk.VBox(gtk.FALSE, 10)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, gtk.FALSE)
if self.bl.useGrub():
self.blname = "GRUB"
else:
self.blname = "LILO"
# XXX this is kind of ugly
if self.dispatch.stepInSkipList("instbootloader"):
self.blname = None
# make sure we get a valid device to say we're installing to
if bl.getDevice() is not None:
self.bldev = bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = fsset.bootloaderChoices(diskSet, self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
self.bllabel = gui.WrappingLabel("")
self.bllabel.set_alignment(0.0, 0.5)
hbox = gtk.HBox(gtk.FALSE, 10)
hbox.pack_start(self.bllabel, gtk.FALSE)
button = gtk.Button(_("_Change boot loader"))
hbox.pack_start(button, gtk.FALSE)
button.connect("clicked", self.changeBootloaderCallback)
alignment = gtk.Alignment()
alignment.set(0.1, 0, 0, 0)
alignment.add(hbox)
thebox.pack_start(alignment, gtk.FALSE)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, gtk.FALSE)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(bl, fsset, diskSet, self.parent, self.intf,
self.blname)
thebox.pack_start(self.oslist.getWidget(), gtk.FALSE)
thebox.pack_start(gtk.HSeparator(), gtk.FALSE)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(bl, self.parent, self.intf)
thebox.pack_start(self.blpass.getWidget(), gtk.FALSE)
thebox.pack_start(gtk.HSeparator(), gtk.FALSE)
# check box to control showing the advanced screen
self.advanced = gtk.CheckButton(
_("Configure advanced boot loader "
"_options"))
if dispatch.stepInSkipList("bootloaderadvanced"):
self.advanced.set_active(gtk.FALSE)
else:
self.advanced.set_active(gtk.TRUE)
thebox.pack_start(self.advanced, gtk.FALSE)
# finally, update the label and activate widgets appropriately
self.updateBootLoaderLabel()
return thebox
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.id.bootloader
self.intf = anaconda.intf
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
thebox = gtk.VBox(False, 5)
thebox.set_border_width(10)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, False)
if self.bl.useGrub():
self.blname = "GRUB"
else:
self.blname = None
# make sure we get a valid device to say we're installing to
if self.bl.getDevice() is not None:
self.bldev = self.bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = anaconda.id.fsset.bootloaderChoices(
anaconda.id.diskset, self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
vb = gtk.VBox(False, 6)
self.grub_radio = gtk.RadioButton(
None,
_("The %s boot loader will be "
"installed on /dev/%s.") % ("GRUB", self.bldev))
self.grub_radio.set_use_underline(False)
vb.pack_start(self.grub_radio)
self.none_radio = gtk.RadioButton(
self.grub_radio, _("No boot loader will be installed."))
vb.pack_start(self.none_radio)
if self.blname is None:
self.none_radio.set_active(True)
self.grub_radio.set_active(False)
else:
self.grub_radio.set_active(True)
self.none_radio.set_active(False)
self.grub_radio.connect("toggled", self.bootloaderChanged)
self.none_radio.connect("toggled", self.bootloaderChanged)
thebox.pack_start(vb, False)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, False)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent, self.blname)
thebox.pack_start(self.oslist.getWidget(), False)
thebox.pack_start(gtk.HSeparator(), False)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
thebox.pack_start(self.blpass.getWidget(), False)
thebox.pack_start(gtk.HSeparator(), False)
# check box to control showing the advanced screen
self.advanced = gtk.CheckButton(
_("Configure advanced boot loader "
"_options"))
if self.dispatch.stepInSkipList("bootloaderadvanced"):
self.advanced.set_active(False)
else:
self.advanced.set_active(True)
thebox.pack_start(self.advanced, False)
self.bootloaderChanged()
return thebox
class MainBootloaderWindow(InstallWindow):
windowTitle = N_("Boot Loader Configuration")
def __init__(self, ics):
InstallWindow.__init__(self, ics)
self.parent = ics.getICW().window
def getPrev(self):
pass
def getNext(self):
# go ahead and set the device even if we already knew it
# since that won't change anything
self.bl.setDevice(self.bldev)
if self.none_radio.get_active():
# if we're not installing a boot loader, don't show the second
# screen and don't worry about other options
self.dispatch.skipStep("instbootloader", skip=1)
self.dispatch.skipStep("bootloaderadvanced", skip=1)
# kind of a hack...
self.bl.defaultDevice = None
return
else:
self.dispatch.skipStep("instbootloader", skip=0)
if self.blname == "GRUB":
self.bl.setUseGrub(1)
else:
self.bl.setUseGrub(0)
# set the password
self.bl.setPassword(self.blpass.getPassword(), isCrypted=0)
# set the bootloader images based on what's in our list
self.oslist.setBootloaderImages()
if self.advanced.get_active():
self.dispatch.skipStep("bootloaderadvanced", skip=0)
else:
self.dispatch.skipStep("bootloaderadvanced", skip=1)
def bootloaderChanged(self, *args):
active = self.grub_radio.get_active()
for widget in [
self.oslist.getWidget(),
self.blpass.getWidget(), self.advanced
]:
widget.set_sensitive(active)
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.id.bootloader
self.intf = anaconda.intf
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
thebox = gtk.VBox(False, 5)
thebox.set_border_width(10)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, False)
if self.bl.useGrub():
self.blname = "GRUB"
else:
self.blname = None
# make sure we get a valid device to say we're installing to
if self.bl.getDevice() is not None:
self.bldev = self.bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = anaconda.id.fsset.bootloaderChoices(
anaconda.id.diskset, self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
vb = gtk.VBox(False, 6)
self.grub_radio = gtk.RadioButton(
None,
_("The %s boot loader will be "
"installed on /dev/%s.") % ("GRUB", self.bldev))
self.grub_radio.set_use_underline(False)
vb.pack_start(self.grub_radio)
self.none_radio = gtk.RadioButton(
self.grub_radio, _("No boot loader will be installed."))
vb.pack_start(self.none_radio)
if self.blname is None:
self.none_radio.set_active(True)
self.grub_radio.set_active(False)
else:
self.grub_radio.set_active(True)
self.none_radio.set_active(False)
self.grub_radio.connect("toggled", self.bootloaderChanged)
self.none_radio.connect("toggled", self.bootloaderChanged)
thebox.pack_start(vb, False)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, False)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent, self.blname)
thebox.pack_start(self.oslist.getWidget(), False)
thebox.pack_start(gtk.HSeparator(), False)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
thebox.pack_start(self.blpass.getWidget(), False)
thebox.pack_start(gtk.HSeparator(), False)
# check box to control showing the advanced screen
self.advanced = gtk.CheckButton(
_("Configure advanced boot loader "
"_options"))
if self.dispatch.stepInSkipList("bootloaderadvanced"):
self.advanced.set_active(False)
else:
self.advanced.set_active(True)
thebox.pack_start(self.advanced, False)
self.bootloaderChanged()
return thebox
class MainBootloaderWindow(InstallWindow):
windowTitle = N_("Boot Loader Configuration")
def __init__(self, ics):
InstallWindow.__init__(self, ics)
self.parent = ics.getICW().window
def getPrev(self):
pass
def getNext(self):
# go ahead and set the device even if we already knew it
# since that won't change anything
self.bl.setDevice(self.bldev)
self.bl.drivelist = self.driveorder
if not self.grubCB.get_active():
# if we're not installing a boot loader, don't show the second
# screen and don't worry about other options
self.dispatch.skipStep("instbootloader", skip = 1)
# kind of a hack...
self.bl.defaultDevice = None
return
else:
self.dispatch.skipStep("instbootloader", skip = 0)
self.bl.setUseGrub(1)
# set the password
self.bl.setPassword(self.blpass.getPassword(), isCrypted = 0)
# set the bootloader images based on what's in our list
self.oslist.setBootloaderImages()
def bootloaderChanged(self, *args):
active = self.grubCB.get_active()
for widget in [ self.oslist.getWidget(), self.blpass.getWidget(), self.deviceButton ]:
if widget:
widget.set_sensitive(active)
def _deviceChange(self, b, anaconda, *args):
def __driveChange(combo, dxml, choices):
if not choices.has_key("mbr"):
return
iter = combo.get_active_iter()
if not iter:
return
first = combo.get_model()[iter][1]
desc = choices["mbr"][1]
dxml.get_widget("mbrRadio").set_label("%s - /dev/%s" %(_(desc), first))
dxml.get_widget("mbrRadio").set_data("bootDevice", first)
def __genStore(combo, disks, active):
model = gtk.TreeStore(gobject.TYPE_STRING, gobject.TYPE_STRING)
combo.set_model(model)
cell = gtk.CellRendererText()
combo.pack_start(cell, True)
combo.set_attributes(cell, text = 0)
for disk in disks:
i = model.append(None)
model[i] = ("%s %8.0f MB %s" %(disk.name, disk.size,
disk.description),
"%s" %(disk.name,))
if disk.name == active:
combo.set_active_iter(i)
return model
(dxml, dialog) = gui.getGladeWidget("blwhere.glade",
"blwhereDialog")
gui.addFrame(dialog)
dialog.set_transient_for(self.parent)
dialog.show()
choices = anaconda.platform.bootloaderChoices(self.bl)
for t in ("mbr", "boot"):
if not choices.has_key(t):
continue
(device, desc) = choices[t]
w = dxml.get_widget("%sRadio" %(t,))
w.set_label("%s - /dev/%s" %(_(desc), device))
w.show()
if self.bldev == device:
w.set_active(True)
else:
w.set_active(False)
w.set_data("bootDevice", device)
for i in range(1, 5):
if len(self.driveorder) < i:
break
combo = dxml.get_widget("bd%dCombo" %(i,))
lbl = dxml.get_widget("bd%dLabel" %(i,))
combo.show()
lbl.show()
partitioned = anaconda.id.storage.partitioned
disks = anaconda.id.storage.disks
bl_disks = [d for d in disks if d in partitioned]
m = __genStore(combo, bl_disks, self.driveorder[i - 1])
dxml.get_widget("bd1Combo").connect("changed", __driveChange, dxml, choices)
__driveChange(dxml.get_widget("bd1Combo"), dxml, choices)
while 1:
rc = dialog.run()
if rc in [gtk.RESPONSE_CANCEL, gtk.RESPONSE_DELETE_EVENT]:
break
# set the boot device based on what they chose
if dxml.get_widget("bootRadio").get_active():
self.bldev = dxml.get_widget("bootRadio").get_data("bootDevice")
elif dxml.get_widget("mbrRadio").get_active():
self.bldev = dxml.get_widget("mbrRadio").get_data("bootDevice")
else:
raise RuntimeError, "No radio button selected!"
# and adjust the boot order
neworder = []
for i in range(1, 5):
if len(self.driveorder) < i:
break
combo = dxml.get_widget("bd%dCombo" %(i,))
iter = combo.get_active_iter()
if not iter:
continue
act = combo.get_model()[iter][1]
if act not in neworder:
neworder.append(act)
for d in self.driveorder:
if d not in neworder:
neworder.append(d)
self.driveorder = neworder
break
dialog.destroy()
self.grubCB.set_label(_("_Install boot loader on /dev/%s.") %
(self.bldev,))
return rc
def _setBLCBText(self):
self.grubCB.set_label(_("_Install boot loader on /dev/%s.") %
(self.bldev,))
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.id.bootloader
self.intf = anaconda.intf
self.driveorder = self.bl.drivelist
if len(self.driveorder) == 0:
partitioned = anaconda.id.storage.partitioned
disks = anaconda.id.storage.disks
self.driveorder = [d.name for d in disks if d in partitioned]
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
thebox = gtk.VBox (False, 12)
thebox.set_border_width(18)
# make sure we get a valid device to say we're installing to
if self.bl.getDevice() is not None:
self.bldev = self.bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = anaconda.platform.bootloaderChoices(self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
hb = gtk.HBox(False, 12)
self.grubCB = gtk.CheckButton(_("_Install boot loader on /dev/%s.") %
(self.bldev,))
self.grubCB.set_active(not self.dispatch.stepInSkipList("instbootloader"))
self.grubCB.connect("toggled", self.bootloaderChanged)
hb.pack_start(self.grubCB, False)
# no "Change device" button on EFI systems, since there should only
# be one EFI System Partition available/usable
self.deviceButton = None
if not iutil.isEfi():
self.deviceButton = gtk.Button(_("_Change device"))
self.deviceButton.connect("clicked", self._deviceChange, anaconda)
hb.pack_start(self.deviceButton, False)
thebox.pack_start(hb, False)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
thebox.pack_start(self.blpass.getWidget(), False)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent)
thebox.pack_end(self.oslist.getWidget(), True)
self.bootloaderChanged()
return thebox
class MainBootloaderWindow(InstallWindow):
windowTitle = N_("Boot Loader Configuration")
def __init__(self, ics):
InstallWindow.__init__(self, ics)
self.parent = ics.getICW().window
def getPrev(self):
pass
def getNext(self):
# go ahead and set the device even if we already knew it
# since that won't change anything
self.bl.setDevice(self.bldev)
self.bl.drivelist = self.driveorder
if not self.grubCB.get_active():
# if we're not installing a boot loader, don't show the second
# screen and don't worry about other options
self.dispatch.skipStep("instbootloader", skip = 1)
# kind of a hack...
self.bl.defaultDevice = None
return
else:
self.dispatch.skipStep("instbootloader", skip = 0)
self.bl.setUseGrub(1)
# set the password
self.bl.setPassword(self.blpass.getPassword(), isCrypted = 0)
# set the bootloader images based on what's in our list
self.oslist.setBootloaderImages()
def bootloaderChanged(self, *args):
active = self.grubCB.get_active()
for widget in [ self.oslist.getWidget(), self.blpass.getWidget(), self.deviceButton ]:
if widget:
widget.set_sensitive(active)
def _deviceChange(self, b, anaconda, *args):
def __driveChange(combo, dxml, choices):
if not choices.has_key("mbr"):
return
iter = combo.get_active_iter()
if not iter:
return
first = combo.get_model()[iter][1]
desc = choices["mbr"][1]
dxml.get_widget("mbrRadio").set_label("%s - /dev/%s" %(_(desc), first))
dxml.get_widget("mbrRadio").set_data("bootDevice", first)
def __genStore(combo, disks, active):
model = gtk.TreeStore(gobject.TYPE_STRING, gobject.TYPE_STRING)
combo.set_model(model)
cell = gtk.CellRendererText()
combo.pack_start(cell, True)
combo.set_attributes(cell, text = 0)
for disk in disks:
i = model.append(None)
model[i] = ("%s %8.0f MB %s" %(disk.name, disk.size,
disk.description),
"%s" %(disk.name,))
if disk.name == active:
combo.set_active_iter(i)
return model
(dxml, dialog) = gui.getGladeWidget("blwhere.glade",
"blwhereDialog")
gui.addFrame(dialog)
dialog.set_transient_for(self.parent)
dialog.show()
choices = anaconda.platform.bootloaderChoices(self.bl)
for t in ("mbr", "boot"):
if not choices.has_key(t):
continue
(device, desc) = choices[t]
w = dxml.get_widget("%sRadio" %(t,))
w.set_label("%s - /dev/%s" %(_(desc), device))
w.show()
if self.bldev == device:
w.set_active(True)
else:
w.set_active(False)
w.set_data("bootDevice", device)
for i in range(1, 5):
if len(self.driveorder) < i:
break
combo = dxml.get_widget("bd%dCombo" %(i,))
lbl = dxml.get_widget("bd%dLabel" %(i,))
combo.show()
lbl.show()
partitioned = anaconda.id.storage.partitioned
disks = anaconda.id.storage.disks
bl_disks = [d for d in disks if d in partitioned]
m = __genStore(combo, bl_disks, self.driveorder[i - 1])
dxml.get_widget("bd1Combo").connect("changed", __driveChange, dxml, choices)
__driveChange(dxml.get_widget("bd1Combo"), dxml, choices)
while 1:
rc = dialog.run()
if rc in [gtk.RESPONSE_CANCEL, gtk.RESPONSE_DELETE_EVENT]:
break
# set the boot device based on what they chose
if dxml.get_widget("bootRadio").get_active():
self.bldev = dxml.get_widget("bootRadio").get_data("bootDevice")
elif dxml.get_widget("mbrRadio").get_active():
self.bldev = dxml.get_widget("mbrRadio").get_data("bootDevice")
else:
raise RuntimeError, "No radio button selected!"
# and adjust the boot order
neworder = []
for i in range(1, 5):
if len(self.driveorder) < i:
break
combo = dxml.get_widget("bd%dCombo" %(i,))
iter = combo.get_active_iter()
if not iter:
continue
act = combo.get_model()[iter][1]
if act not in neworder:
neworder.append(act)
for d in self.driveorder:
if d not in neworder:
neworder.append(d)
self.driveorder = neworder
break
dialog.destroy()
self.grubCB.set_label(_("_Install boot loader on /dev/%s.") %
(self.bldev,))
return rc
def _setBLCBText(self):
self.grubCB.set_label(_("_Install boot loader on /dev/%s.") %
(self.bldev,))
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.id.bootloader
self.intf = anaconda.intf
self.driveorder = self.bl.drivelist
if len(self.driveorder) == 0:
partitioned = anaconda.id.storage.partitioned
disks = anaconda.id.storage.disks
self.driveorder = [d.name for d in disks if d in partitioned]
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
isBlack = False
'''
f = open("/root/isotype")
lines = f.readlines()
f.close()
for x in lines:
if x.find("vServer") != -1 or x.find("vCenter") != -1:
isBlack = True
break
'''
import fvi
x = fvi.get_iso_type()
if x.find("vServer") != -1 or x.find("vCenter") != -1:
isBlack = True
if isBlack:
bgcolor = "#333333"
fontcolor = "#e6e6e6"
else:
bgcolor = "#cccccc"
fontcolor = "#333333"
eboximage = gtk.EventBox()
eboximage.set_app_paintable(True)
eboximage.modify_bg(gtk.STATE_NORMAL,gtk.gdk.color_parse(bgcolor))
eboximage.set_size_request(1024,100)
fixed = gtk.Fixed()
i = gtk.Image()
path = "/usr/share/anaconda/pixmaps/icon11_boot.png"
i.set_from_file(path)
i.show()
fixed.put(i,45,15)
label1 = gtk.Label()
lstr = "<span font_desc=' 16' weight='bold' foreground='"+fontcolor+"'><b>引导程序:</b></span>"
label1.set_markup(lstr)
fixed.put(label1,160,23)
label2 = gtk.Label()
label2.set_markup("<span font_desc=' 11.5' weight='bold' foreground='"+fontcolor+"'><b>选择引导程序安装位置</b></span>")
fixed.put(label2,160,58)
eboximage.add(fixed)
eboximage.show_all()
thebox = gtk.VBox(False,0)
thebox.pack_start(eboximage,False,False,0)
###########################################################
# make sure we get a valid device to say we're installing to
if self.bl.getDevice() is not None:
self.bldev = self.bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = anaconda.platform.bootloaderChoices(self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
###########################################################
boxall = gtk.VBox(False,0)
hb = gtk.HBox(False, 12)
"""self.grubCB = gtk.CheckButton(_("_Install boot loader on /dev/%s.") %
(self.bldev,))"""
self.grubCB = gtk.CheckButton((u"在/dev/%s 中安装引导装载程序") %
(self.bldev,))
l = self.grubCB.get_children()[0]
lstr = "<span foreground='#333333'><b>"+l.get_text()+"</b></span>"
l.set_markup(lstr)
self.grubCB.set_active(not self.dispatch.stepInSkipList("instbootloader"))
self.grubCB.connect("toggled", self.bootloaderChanged)
hb.pack_start(self.grubCB, False)
# no "Change device" button on EFI systems, since there should only
# be one EFI System Partition available/usable
self.deviceButton = None
if not iutil.isEfi():
self.deviceButton = gtk.Button(_(u"更换设备"))
l = self.deviceButton.get_children()[0]
lstr = "<span foreground='#333333'><b>"+l.get_text()+"</b></span>"
l.set_markup(lstr)
self.deviceButton.connect("clicked", self._deviceChange, anaconda)
hb.pack_start(self.deviceButton, False,False,32)
boxall.pack_start(hb,False,False,0)
#################################################################
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
boxall.pack_start(self.blpass.getWidget(),False,False,5)
###################################################################
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent)
boxall.pack_start(self.oslist.getWidget(),True,True,10)
fix = gtk.Fixed()
fix.put(boxall,35,35)
thebox.pack_start(fix,True,True,20)
######################################################################
self.bootloaderChanged()
"""return thebox"""
####################################################################
ebox = gtk.EventBox()
ebox.add(thebox)
ebox.set_app_paintable(True)
ebox.set_border_width(0)
ebox.modify_bg(gtk.STATE_NORMAL,gtk.gdk.color_parse("#e6e6e6"))
return ebox
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.id.bootloader
self.intf = anaconda.intf
self.driveorder = self.bl.drivelist
if len(self.driveorder) == 0:
partitioned = anaconda.id.storage.partitioned
disks = anaconda.id.storage.disks
self.driveorder = [d.name for d in disks if d in partitioned]
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
isBlack = False
'''
f = open("/root/isotype")
lines = f.readlines()
f.close()
for x in lines:
if x.find("vServer") != -1 or x.find("vCenter") != -1:
isBlack = True
break
'''
import fvi
x = fvi.get_iso_type()
if x.find("vServer") != -1 or x.find("vCenter") != -1:
isBlack = True
if isBlack:
bgcolor = "#333333"
fontcolor = "#e6e6e6"
else:
bgcolor = "#cccccc"
fontcolor = "#333333"
eboximage = gtk.EventBox()
eboximage.set_app_paintable(True)
eboximage.modify_bg(gtk.STATE_NORMAL,gtk.gdk.color_parse(bgcolor))
eboximage.set_size_request(1024,100)
fixed = gtk.Fixed()
i = gtk.Image()
path = "/usr/share/anaconda/pixmaps/icon11_boot.png"
i.set_from_file(path)
i.show()
fixed.put(i,45,15)
label1 = gtk.Label()
lstr = "<span font_desc=' 16' weight='bold' foreground='"+fontcolor+"'><b>引导程序:</b></span>"
label1.set_markup(lstr)
fixed.put(label1,160,23)
label2 = gtk.Label()
label2.set_markup("<span font_desc=' 11.5' weight='bold' foreground='"+fontcolor+"'><b>选择引导程序安装位置</b></span>")
fixed.put(label2,160,58)
eboximage.add(fixed)
eboximage.show_all()
thebox = gtk.VBox(False,0)
thebox.pack_start(eboximage,False,False,0)
###########################################################
# make sure we get a valid device to say we're installing to
if self.bl.getDevice() is not None:
self.bldev = self.bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = anaconda.platform.bootloaderChoices(self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
###########################################################
boxall = gtk.VBox(False,0)
hb = gtk.HBox(False, 12)
"""self.grubCB = gtk.CheckButton(_("_Install boot loader on /dev/%s.") %
(self.bldev,))"""
self.grubCB = gtk.CheckButton((u"在/dev/%s 中安装引导装载程序") %
(self.bldev,))
l = self.grubCB.get_children()[0]
lstr = "<span foreground='#333333'><b>"+l.get_text()+"</b></span>"
l.set_markup(lstr)
self.grubCB.set_active(not self.dispatch.stepInSkipList("instbootloader"))
self.grubCB.connect("toggled", self.bootloaderChanged)
hb.pack_start(self.grubCB, False)
# no "Change device" button on EFI systems, since there should only
# be one EFI System Partition available/usable
self.deviceButton = None
if not iutil.isEfi():
self.deviceButton = gtk.Button(_(u"更换设备"))
l = self.deviceButton.get_children()[0]
lstr = "<span foreground='#333333'><b>"+l.get_text()+"</b></span>"
l.set_markup(lstr)
self.deviceButton.connect("clicked", self._deviceChange, anaconda)
hb.pack_start(self.deviceButton, False,False,32)
boxall.pack_start(hb,False,False,0)
#################################################################
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
boxall.pack_start(self.blpass.getWidget(),False,False,5)
###################################################################
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent)
boxall.pack_start(self.oslist.getWidget(),True,True,10)
fix = gtk.Fixed()
fix.put(boxall,35,35)
thebox.pack_start(fix,True,True,20)
######################################################################
self.bootloaderChanged()
"""return thebox"""
####################################################################
ebox = gtk.EventBox()
ebox.add(thebox)
ebox.set_app_paintable(True)
ebox.set_border_width(0)
ebox.modify_bg(gtk.STATE_NORMAL,gtk.gdk.color_parse("#e6e6e6"))
return ebox
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.id.bootloader
self.intf = anaconda.intf
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
thebox = gtk.VBox (False, 5)
thebox.set_border_width(10)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, False)
if self.bl.useGrub():
self.blname = "GRUB"
else:
self.blname = None
# make sure we get a valid device to say we're installing to
if self.bl.getDevice() is not None:
self.bldev = self.bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = anaconda.id.fsset.bootloaderChoices(anaconda.id.diskset, self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
vb = gtk.VBox(False, 6)
self.grub_radio = gtk.RadioButton(None, _("The %s boot loader will be "
"installed on /dev/%s.") %
("GRUB", self.bldev))
self.grub_radio.set_use_underline(False)
vb.pack_start(self.grub_radio)
self.none_radio = gtk.RadioButton(self.grub_radio,
_("No boot loader will be installed."))
vb.pack_start(self.none_radio)
if self.blname is None:
self.none_radio.set_active(True)
self.grub_radio.set_active(False)
else:
self.grub_radio.set_active(True)
self.none_radio.set_active(False)
self.grub_radio.connect("toggled", self.bootloaderChanged)
self.none_radio.connect("toggled", self.bootloaderChanged)
thebox.pack_start(vb, False)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, False)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent, self.blname)
thebox.pack_start(self.oslist.getWidget(), False)
thebox.pack_start (gtk.HSeparator(), False)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
thebox.pack_start(self.blpass.getWidget(), False)
thebox.pack_start (gtk.HSeparator(), False)
# check box to control showing the advanced screen
self.advanced = gtk.CheckButton(_("Configure advanced boot loader "
"_options"))
if self.dispatch.stepInSkipList("bootloaderadvanced"):
self.advanced.set_active(False)
else:
self.advanced.set_active(True)
thebox.pack_start(self.advanced, False)
self.bootloaderChanged()
return thebox
class MainBootloaderWindow(InstallWindow):
windowTitle = N_("Boot Loader Configuration")
def __init__(self, ics):
InstallWindow.__init__(self, ics)
self.parent = ics.getICW().window
def getPrev(self):
pass
def getNext(self):
# go ahead and set the device even if we already knew it
# since that won't change anything
self.bl.setDevice(self.bldev)
if self.none_radio.get_active():
# if we're not installing a boot loader, don't show the second
# screen and don't worry about other options
self.dispatch.skipStep("instbootloader", skip = 1)
self.dispatch.skipStep("bootloaderadvanced", skip = 1)
# kind of a hack...
self.bl.defaultDevice = None
return
else:
self.dispatch.skipStep("instbootloader", skip = 0)
if self.blname == "GRUB":
self.bl.setUseGrub(1)
else:
self.bl.setUseGrub(0)
# set the password
self.bl.setPassword(self.blpass.getPassword(), isCrypted = 0)
# set the bootloader images based on what's in our list
self.oslist.setBootloaderImages()
if self.advanced.get_active():
self.dispatch.skipStep("bootloaderadvanced", skip = 0)
else:
self.dispatch.skipStep("bootloaderadvanced", skip = 1)
def bootloaderChanged(self, *args):
active = self.grub_radio.get_active()
for widget in [ self.oslist.getWidget(), self.blpass.getWidget(),
self.advanced ]:
widget.set_sensitive(active)
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.id.bootloader
self.intf = anaconda.intf
if self.bl.getPassword():
self.usePass = 1
self.password = self.bl.getPassword()
else:
self.usePass = 0
self.password = None
thebox = gtk.VBox (False, 5)
thebox.set_border_width(10)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, False)
if self.bl.useGrub():
self.blname = "GRUB"
else:
self.blname = None
# make sure we get a valid device to say we're installing to
if self.bl.getDevice() is not None:
self.bldev = self.bl.getDevice()
else:
# we don't know what it is yet... if mbr is possible, we want
# it, else we want the boot dev
choices = anaconda.id.fsset.bootloaderChoices(anaconda.id.diskset, self.bl)
if choices.has_key('mbr'):
self.bldev = choices['mbr'][0]
else:
self.bldev = choices['boot'][0]
vb = gtk.VBox(False, 6)
self.grub_radio = gtk.RadioButton(None, _("The %s boot loader will be "
"installed on /dev/%s.") %
("GRUB", self.bldev))
self.grub_radio.set_use_underline(False)
vb.pack_start(self.grub_radio)
self.none_radio = gtk.RadioButton(self.grub_radio,
_("No boot loader will be installed."))
vb.pack_start(self.none_radio)
if self.blname is None:
self.none_radio.set_active(True)
self.grub_radio.set_active(False)
else:
self.grub_radio.set_active(True)
self.none_radio.set_active(False)
self.grub_radio.connect("toggled", self.bootloaderChanged)
self.none_radio.connect("toggled", self.bootloaderChanged)
thebox.pack_start(vb, False)
spacer = gtk.Label("")
spacer.set_size_request(10, 1)
thebox.pack_start(spacer, False)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent, self.blname)
thebox.pack_start(self.oslist.getWidget(), False)
thebox.pack_start (gtk.HSeparator(), False)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
thebox.pack_start(self.blpass.getWidget(), False)
thebox.pack_start (gtk.HSeparator(), False)
# check box to control showing the advanced screen
self.advanced = gtk.CheckButton(_("Configure advanced boot loader "
"_options"))
if self.dispatch.stepInSkipList("bootloaderadvanced"):
self.advanced.set_active(False)
else:
self.advanced.set_active(True)
thebox.pack_start(self.advanced, False)
self.bootloaderChanged()
return thebox
class MainBootloaderWindow(InstallWindow):
windowTitle = N_("Boot Loader Configuration")
def __init__(self, ics):
InstallWindow.__init__(self, ics)
self.parent = ics.getICW().window
def getPrev(self):
pass
def getNext(self):
# go ahead and set the device even if we already knew it
# since that won't change anything
self.bl.stage1_device = self.bldev
self.bl.drive_order = self.driveorder
if not self.grubCB.get_active():
# if we're not installing a boot loader, don't show the second
# screen and don't worry about other options
self.dispatch.skip_steps("instbootloader")
return
else:
self.dispatch.request_steps("instbootloader")
# set the password
self.bl.password = self.blpass.getPassword()
# set the bootloader images based on what's in our list
self.oslist.setBootloaderImages()
def bootloaderChanged(self, *args):
active = self.grubCB.get_active()
for widget in [ self.oslist.getWidget(), self.blpass.getWidget(), self.deviceButton ]:
if widget:
widget.set_sensitive(active)
def _deviceChange(self, b, anaconda, *args):
def __genStore(combo, disks, active):
model = gtk.TreeStore(gobject.TYPE_STRING, gobject.TYPE_PYOBJECT)
combo.set_model(model)
cell = gtk.CellRendererText()
combo.pack_start(cell, True)
combo.set_attributes(cell, text = 0)
for disk in disks:
i = model.append(None)
model[i] = ("%s %8.0f MB %s" %(disk.name, disk.size,
disk.description),
disk)
if disk.name == active:
combo.set_active_iter(i)
return model
(dxml, dialog) = gui.getGladeWidget("blwhere.glade",
"blwhereDialog")
gui.addFrame(dialog)
dialog.set_transient_for(self.parent)
dialog.show()
# XXX for md stage1, should we show md, first member disk, or first
# disk?
stage1 = anaconda.storage.bootLoaderDevice
stage1_desc = anaconda.bootloader.device_description(stage1)
choices = {"mbr": (stage1, stage1_desc)}
stage2 = anaconda.storage.bootDevice
try:
stage2_desc = anaconda.bootloader.device_description(stage2)
except ValueError:
# stage2's type isn't valid as stage1, so don't offer "boot".
pass
else:
choices["boot"] = (stage2, stage2_desc)
for t in ("mbr", "boot"):
if not choices.has_key(t):
continue
(device, desc) = choices[t]
w = dxml.get_widget("%sRadio" %(t,))
w.set_label("%s - %s" %(desc, device.path))
w.show()
w.set_active(self.bldev == device)
w.set_data("bootDevice", device)
bl_disks = anaconda.bootloader.drives
for i in range(1, 5):
if len(self.driveorder) < i:
break
combo = dxml.get_widget("bd%dCombo" %(i,))
lbl = dxml.get_widget("bd%dLabel" %(i,))
combo.show()
lbl.show()
m = __genStore(combo, bl_disks, self.driveorder[i - 1])
while True:
rc = dialog.run()
if rc in [gtk.RESPONSE_CANCEL, gtk.RESPONSE_DELETE_EVENT]:
break
# set the boot device based on what they chose
if dxml.get_widget("bootRadio").get_active():
self.bldev = dxml.get_widget("bootRadio").get_data("bootDevice")
elif dxml.get_widget("mbrRadio").get_active():
self.bldev = dxml.get_widget("mbrRadio").get_data("bootDevice")
else:
raise RuntimeError, "No radio button selected!"
# and adjust the boot order
neworder = []
for i in range(1, 5):
if len(self.driveorder) < i:
break
combo = dxml.get_widget("bd%dCombo" %(i,))
iter = combo.get_active_iter()
if not iter:
continue
act = combo.get_model()[iter][1].name
if act not in neworder:
neworder.append(act)
for d in self.driveorder:
if d not in neworder:
neworder.append(d)
self.driveorder = neworder
break
dialog.destroy()
self.grubCB.set_label(_("_Install boot loader on %s.") %
(self.bldev.path,))
return rc
def getScreen(self, anaconda):
self.dispatch = anaconda.dispatch
self.bl = anaconda.bootloader
self.intf = anaconda.intf
self.driveorder = [d.name for d in self.bl.drives]
thebox = gtk.VBox (False, 12)
thebox.set_border_width(18)
# make sure we get a valid device to say we're installing to
self.bldev = self.bl.stage1_device
hb = gtk.HBox(False, 12)
self.grubCB = gtk.CheckButton(_("_Install boot loader on %s.") %
(self.bldev.path,))
self.grubCB.set_active(self.dispatch.step_enabled("instbootloader"))
self.grubCB.connect("toggled", self.bootloaderChanged)
hb.pack_start(self.grubCB, False)
# no "Change device" button on EFI systems, since there should only
# be one EFI System Partition available/usable
self.deviceButton = None
if not iutil.isEfi():
self.deviceButton = gtk.Button(_("_Change device"))
self.deviceButton.connect("clicked", self._deviceChange, anaconda)
hb.pack_start(self.deviceButton, False)
thebox.pack_start(hb, False)
# control whether or not there's a boot loader password and what it is
self.blpass = BootloaderPasswordWidget(anaconda, self.parent)
thebox.pack_start(self.blpass.getWidget(), False)
# configure the systems available to boot from the boot loader
self.oslist = OSBootWidget(anaconda, self.parent)
if not self.bl.name == "GRUB2":
# with grub2 we use os-prober to generate menu entries for all
# other OS it finds without user interaction
thebox.pack_end(self.oslist.getWidget(), True)
self.bootloaderChanged()
return thebox
