def run(self, circuit: Circuit, data: dict[str, Any]) -> None:
"""Perform the pass's operation, see BasePass for more info."""
# Check data for windows markers
if 'window_markers' not in data:
_logger.warning('Did not find any window markers.')
return
window_markers = data['window_markers']
_logger.debug('Found window_markers: %s.' % str(window_markers))
if not is_iterable(window_markers):
_logger.debug('Invalid type for window_markers.')
return
if not all(is_integer(marker) for marker in window_markers):
_logger.debug('Invalid type for window_markers.')
return
# Resynthesis each window
index_shift = 0
for marker in window_markers:
marker -= index_shift
# Slice window
begin_cycle = int(marker - self.window_size // 2)
end_cycle = int(marker + np.ceil(self.window_size / 2))
if begin_cycle < 0:
begin_cycle = 0
if end_cycle > circuit.get_num_cycles():
end_cycle = circuit.get_num_cycles() - 1
window = Circuit(circuit.get_size(), circuit.get_radixes())
window.extend(circuit[begin_cycle:end_cycle])
_logger.info(
'Resynthesizing window from cycle '
f'{begin_cycle} to {end_cycle}.', )
# Synthesize
utry = window.get_unitary()
new_window = self.synthesispass.synthesize(utry, data)
# Replace
if self.replace_filter(new_window, window):
_logger.debug('Replacing window with synthesized circuit.')
actual_window_size = end_cycle - begin_cycle
for _ in range(actual_window_size):
circuit.pop_cycle(begin_cycle)
circuit.insert_circuit(
begin_cycle,
new_window,
list(range(circuit.get_size())),
)
index_shift += actual_window_size - new_window.get_num_cycles()
def get_circuit(self) -> Circuit:
"""Retrieve the circuit generated after walking a parse tree."""
num_qubits = sum(qubit_reg.size for qubit_reg in self.qubit_regs)
if num_qubits == 0:
raise LangException('No qubit registers defined.')
circuit = Circuit(num_qubits)
circuit.extend(self.op_list)
return circuit
def test_type_invalid_2(self, not_an_int: Any) -> None:
circuit = Circuit(4, [2, 2, 3, 3])
try:
circuit.extend(not_an_int)
except TypeError:
return
except BaseException:
assert False, 'Unexpected Exception.'
def test_type_valid_2(self) -> None:
circuit = Circuit(4, [2, 2, 3, 3])
try:
circuit.extend([Operation(HGate(), [0])])
except TypeError:
assert False, 'Unexpected TypeError.'
except BaseException:
return
def run(self, circuit: Circuit, data: dict[str, Any]) -> None:
"""
Partition gates in a circuit into a series of CircuitGates.
Args:
circuit (Circuit): Circuit to be partitioned.
data (dict[str,Any]): Optional data unique to specific run.
"""
if self.block_size > circuit.get_size():
_logger.warning(
'Configured block size is greater than circuit size; '
'blocking entire circuit.', )
circuit.fold({
qudit_index: (0, circuit.get_num_cycles())
for qudit_index in range(circuit.get_size())
})
return
# If a MachineModel is provided in the data dict, it will be used.
# Otherwise all-to-all connectivity is assumed.
model = None
if 'machine_model' in data:
model = data['machine_model']
if (not isinstance(model, MachineModel)
or model.num_qudits < circuit.get_size()):
_logger.warning(
'MachineModel not specified or invalid;'
' defaulting to all-to-all.', )
model = MachineModel(circuit.get_size())
# Find all connected, `block_size`-sized groups of qudits
# NOTE: This assumes circuit and topology qudit numbers are equal
qudit_groups = model.get_locations(self.block_size)
# Prune unused qudit groups
used_qudits = [
q for q in range(circuit.get_size())
if not circuit.is_qudit_idle(q)
]
for qudit_group in qudit_groups:
if all([q not in used_qudits for q in qudit_group]):
qudit_groups.remove(qudit_group)
# divider splits the circuit into partitioned and unpartitioned spaces.
active_qudits = circuit.get_active_qudits()
num_cycles = circuit.get_num_cycles()
divider = [
0 if q in active_qudits else num_cycles
for q in range(circuit.get_size())
]
# Form regions until there are no more gates to partition
regions: list[CircuitRegion] = []
while any(cycle < num_cycles for cycle in divider):
# Move past/skip any gates that are larger than block size
qudits_to_increment: list[int] = []
for qudit, cycle in enumerate(divider):
if qudit in qudits_to_increment or cycle >= num_cycles:
continue
if not circuit.is_point_idle((cycle, qudit)):
op = circuit[cycle, qudit]
if len(op.location) > self.block_size:
if all(divider[q] == cycle for q in op.location):
qudits_to_increment.extend(op.location)
_logger.warning(
'Skipping gate larger than block size.', )
if len(qudits_to_increment) > 0:
regions.append(
CircuitRegion(
{
qudit: (divider[qudit], divider[qudit])
for qudit in qudits_to_increment
}, ), )
for qudit in qudits_to_increment:
divider[qudit] += 1
# Skip any idle qudit-cycles
amount_to_add_to_each_qudit = [
0 for _ in range(circuit.get_size())
]
for qudit, cycle in enumerate(divider):
while (cycle < num_cycles and circuit.is_point_idle(
(cycle, qudit))):
amount_to_add_to_each_qudit[qudit] += 1
cycle += 1
for qudit, amount in enumerate(amount_to_add_to_each_qudit):
divider[qudit] += amount
# Find the scores of the qudit groups.
best_score = None
best_region = None
for qudit_group in qudit_groups:
ops_and_cycles = circuit.operations_with_cycles(
qudits_or_region=CircuitRegion({
qudit_index: (divider[qudit_index], num_cycles)
for qudit_index in qudit_group
}), )
in_qudits = list(q for q in qudit_group)
stopped_cycles = {q: num_cycles for q in qudit_group}
score = 0
for cycle, op in ops_and_cycles:
if len(op.location.union(in_qudits)) != len(in_qudits):
for qudit_index in op.location.intersection(in_qudits):
stopped_cycles[qudit_index] = cycle
in_qudits.remove(qudit_index)
else:
if len(op.location) > 1:
score += self.multi_gate_score
else:
score += self.single_gate_score
if len(in_qudits) == 0:
break
if best_score is None or score > best_score:
best_score = score
best_region = CircuitRegion({
qudit: (
divider[qudit],
# Might have errors if below is removed
stopped_cycles[qudit] - 1,
)
for qudit in qudit_group
# This statement
# if stopped_cycles[qudit] - 1 >= divider[qudit]
})
if best_score is None or best_region is None:
raise RuntimeError('No valid block found.')
_logger.info('Found block with score: %d.' % (best_score))
regions.append(best_region)
# Update divider
for qudit_index in best_region:
divider[qudit_index] = best_region[qudit_index].upper + 1
# Fold the circuit
folded_circuit = Circuit(circuit.get_size(), circuit.get_radixes())
# Option to keep a block's idle qudits as part of the CircuitGate
if 'keep_idle_qudits' in data and data['keep_idle_qudits'] is True:
for region in regions:
small_region = circuit.downsize_region(region)
cgc = circuit.get_slice(small_region.points)
if len(region.location) > len(small_region.location):
for i in range(len(region.location)):
if region.location[i] not in small_region.location:
cgc.insert_qudit(i)
folded_circuit.append_gate(
CircuitGate(cgc, True),
sorted(list(region.keys())),
list(cgc.get_params()),
)
else:
for region in regions:
region = circuit.downsize_region(region)
if 0 < len(region) <= self.block_size:
cgc = circuit.get_slice(region.points)
folded_circuit.append_gate(
CircuitGate(cgc, True),
sorted(list(region.keys())),
list(cgc.get_params()),
)
else:
folded_circuit.extend(circuit[region])
circuit.become(folded_circuit)
