def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
"""Set up the Broadlink IR Media Player platform."""
name = config.get(CONF_NAME)
ip_addr = config.get(CONF_HOST)
mac_addr = binascii.unhexlify(config.get(CONF_MAC).encode().replace(b':', b''))
import broadlink
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to Broadlink RM Device")
ircodes_ini_file = config.get(CONF_IRCODES_INI)
if ircodes_ini_file.startswith("/"):
ircodes_ini_file = ircodes_ini_file[1:]
ircodes_ini_path = hass.config.path(ircodes_ini_file)
if os.path.exists(ircodes_ini_path):
ircodes_ini = ConfigParser()
ircodes_ini.optionxform = str
ircodes_ini.read(ircodes_ini_path)
else:
_LOGGER.error("The ini file was not found. (" + ircodes_ini_path + ")")
return
async_add_devices([BroadlinkIRMediaPlayer(hass, name, broadlink_device, ircodes_ini)], True)
def learnCommand(commandName):
device = broadlink.rm((RMIPAddress, RMPort), RMMACAddress)
device.auth()
deviceKey = device.key
deviceIV = device.iv
device.enter_learning()
time.sleep(RealTimeout)
LearnedCommand = device.check_data()
if LearnedCommand is None:
print('Command not received')
return False
AdditionalData = bytearray([0x00, 0x00, 0x00, 0x00])
finalCommand = AdditionalData + LearnedCommand
AESEncryption = AES.new(str(deviceKey), AES.MODE_CBC, str(deviceIV))
decodedCommand = binascii.hexlify(AESEncryption.decrypt(str(finalCommand)))
broadlinkControlIniFile = open(path.join(settings.applicationDir, 'settings.ini'), 'w')
settingsFile.set('Commands', commandName, decodedCommand)
settingsFile.write(broadlinkControlIniFile)
broadlinkControlIniFile.close()
return True
def getTempRM():
device = broadlink.rm((RMIPAddress, RMPort), RMMACAddress)
device.auth()
temperature = device.check_temperature()
if temperature:
return temperature
return False
def sendCommand(commandName):
device = broadlink.rm((RMIPAddress, RMPort), RMMACAddress)
device.auth()
deviceKey = device.key
deviceIV = device.iv
if settingsFile.has_option('Commands', commandName):
commandFromSettings = settingsFile.get('Commands', commandName)
else:
return False
print('sending command %s' % commandName)
if commandFromSettings.strip() != '':
decodedCommand = binascii.unhexlify(commandFromSettings)
AESEncryption = AES.new(str(deviceKey), AES.MODE_CBC, str(deviceIV))
encodedCommand = AESEncryption.encrypt(str(decodedCommand))
finalCommand = encodedCommand[0x04:]
signal.signal(signal.SIGALRM, signal_handler)
signal.alarm(4) # Ten seconds
try:
device.send_data(finalCommand)
except Exception, msg:
print "Probably timed out.."
return True
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES, {})
switches = []
ip_addr = config.get(CONF_HOST)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device.")
persistent_notification = loader.get_component('persistent_notification')
@asyncio.coroutine
def _learn_command(call):
try:
yield from hass.loop.run_in_executor(None, broadlink_device.auth)
except socket.timeout:
_LOGGER.error("Failed to connect to device.")
return
yield from hass.loop.run_in_executor(None,
broadlink_device.enter_learning)
_LOGGER.info("Press the key you want HASS to learn")
start_time = utcnow()
while (utcnow() - start_time) < timedelta(seconds=20):
packet = yield from hass.loop.run_in_executor(None,
broadlink_device.
check_data)
if packet:
log_msg = 'Recieved packet is: {}'.\
format(b64encode(packet).decode('utf8'))
_LOGGER.info(log_msg)
persistent_notification.async_create(hass, log_msg,
title='Broadlink switch')
return
yield from asyncio.sleep(1, loop=hass.loop)
_LOGGER.error('Did not received any signal.')
persistent_notification.async_create(hass,
"Did not received any signal",
title='Broadlink switch')
hass.services.register(DOMAIN, SERVICE_LEARN, _learn_command)
for object_id, device_config in devices.items():
switches.append(
BroadlinkRM2Switch(
device_config.get(CONF_FRIENDLY_NAME, object_id),
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF),
broadlink_device
)
)
add_devices(switches)
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES)
slots = config.get('slots', {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
def _get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots['slot_{}'.format(slot)]:
return '{} slot {}'.format(switch_friendly_name, slot)
return slots['slot_{}'.format(slot)]
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
hass.add_job(async_setup_service, hass, ip_addr, broadlink_device)
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
object_id,
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)
)
)
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
elif switch_type in MP1_TYPES:
switches = []
broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr, None)
parent_device = BroadlinkMP1Switch(broadlink_device)
for i in range(1, 5):
slot = BroadlinkMP1Slot(
_get_mp1_slot_name(friendly_name, i),
broadlink_device, i, parent_device)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_entities(switches)
async def async_setup_platform(hass,
config,
async_add_devices,
discovery_info=None):
"""Set up the Broadlink IR Climate platform."""
name = config.get(CONF_NAME)
ip_addr = config.get(CONF_HOST)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
min_temp = config.get(CONF_MIN_TEMP)
max_temp = config.get(CONF_MAX_TEMP)
target_temp_step = config.get(CONF_TARGET_TEMP_STEP)
temp_sensor_entity_id = config.get(CONF_TEMP_SENSOR)
operation_list = config.get(CONF_CUSTOMIZE).get(
CONF_OPERATIONS, []) or DEFAULT_OPERATION_LIST
operation_list = [STATE_OFF] + operation_list
fan_list = config.get(CONF_CUSTOMIZE).get(CONF_FAN_MODES,
[]) or DEFAULT_FAN_MODE_LIST
import broadlink
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to Broadlink RM Device")
ircodes_ini_file = config.get(CONF_IRCODES_INI)
if ircodes_ini_file.startswith("/"):
ircodes_ini_file = ircodes_ini_file[1:]
ircodes_ini_path = hass.config.path(ircodes_ini_file)
if os.path.exists(ircodes_ini_path):
ircodes_ini = ConfigParser()
ircodes_ini.read(ircodes_ini_path)
else:
_LOGGER.error("The ini file was not found. (" + ircodes_ini_path + ")")
return
async_add_devices([
BroadlinkIRClimate(hass, name, broadlink_device, ircodes_ini, min_temp,
max_temp, target_temp_step, temp_sensor_entity_id,
operation_list, fan_list)
])
def setup_platform(hass, config, add_devices_callback, discovery_info=None):
"""Set up the Broadlink-controlled fan platform."""
name = config.get(CONF_NAME)
ip_addr = config.get(CONF_HOST)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
speed_list = config.get(CONF_CUSTOMIZE).get(CONF_SPEEDS,
[]) or DEFAULT_SPEED_LIST
if not STATE_OFF in speed_list:
speed_list.insert(0, STATE_OFF)
default_speed = config.get(CONF_DEFAULT_SPEED)
default_direction = config.get(CONF_DEFAULT_DIRECTION)
import broadlink
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to Broadlink RM Device")
rfcodes_ini_file = config.get(CONF_RFCODES_INI)
if rfcodes_ini_file.startswith("/"):
rfcodes_ini_file = rfcodes_ini_file[1:]
rfcodes_ini_path = hass.config.path(rfcodes_ini_file)
if os.path.exists(rfcodes_ini_path):
rfcodes_ini = ConfigParser()
rfcodes_ini.read(rfcodes_ini_path)
else:
_LOGGER.error("The ini file was not found. (" + rfcodes_ini_path + ")")
return
if DIRECTION_ANTICLOCKWISE in rfcodes_ini.sections(
) and DIRECTION_CLOCKWISE in rfcodes_ini.sections():
supported_features = SUPPORT_SPEED_AND_DIRECTION
else:
supported_features = LIMITED_SUPPORT
#if 'oscillate' in rfcodes_ini.sections():
# supported_features = supported_features | SUPPORT_OSCILLATE
add_devices_callback([
BroadlinkFan(hass, name, broadlink_device, rfcodes_ini, speed_list,
default_speed, default_direction, supported_features)
])
def device(self):
device = broadlink.rm(
host=(self.ip, self.port), mac=dec_hex(self.mac_hex), devtype=self.devtype
)
try:
device.auth()
except broadlink.exceptions.NetworkTimeoutError:
_LOGGER.error(
"Can't connect to device %s (IP: %s MAC: %s)",
self.name,
self.ip,
self.mac,
)
return None
return device
def broadlinkConnect():
global device, brohost, bromac
try:
device = broadlink.rm(host=(brohost, 80),
mac=bytearray.fromhex(bromac),
devtype='RM2')
device.auth()
device.host
print("Connected to Broadlink device.")
except:
print("Error Connecting to Broadlink device....")
sys.exit(2)
return True
def broadlinkConnect():
global device, isConnected
try:
device = broadlink.rm(host=(Parameters["Address"],80), mac=bytearray.fromhex(Parameters["Mode1"]))
device.auth()
device.host
isConnected = True
Domoticz.Log( "Connected to Broadlink device.")
except:
Domoticz.Error( "Error Connecting to Broadlink device....")
isConnected = False
return False
return True
def readSettings(settingsFile, devname):
try:
Dev = devices.Dev[devname]
if Dev['Type'] == 'RM' or Dev['Type'] == 'RM2':
device = broadlink.rm((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'MP1':
device = broadlink.mp1((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'SP1':
device = broadlink.sp1((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'SP2':
device = broadlink.sp2((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'A1':
device = broadlink.a1((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'HYSEN':
device = broadlink.hysen((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'S1C':
device = broadlink.S1C((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'DOOYA':
device = broadlink.dooya((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
else:
return False
Dev['BaseType'] = "broadlink"
if 'Delay' in Dev:
device.delay = Dev['Delay']
else:
device.delay = 0.0
#- set the callbacks
Dev['learnCommand'] = learnCommand
Dev['sendCommand'] = sendCommand
Dev['getStatus'] = None
Dev['setStatus'] = None
Dev['getSensor'] = getSensor
return device
except Exception as e:
logfile(
"Broadlink device support requires broadlink python module.\npip3 install broadlink",
"WARN")
return None
def onStart(self):
if Parameters["Mode6"] == "Debug":
Domoticz.Debugging(1)
if (len(Devices) == 0):
Domoticz.Device(Name="Temp", Unit=1,
TypeName="Temperature").Create()
self.myRM = broadlink.rm(host=(Parameters["Address"],
int(Parameters["Port"])),
mac=bytearray.fromhex(Parameters["Mode1"]))
try:
self.isFound = self.myRM.auth()
except socket.timeout:
self.isFound = False
Domoticz.Error("RM not found")
Domoticz.Heartbeat(60)
Domoticz.Debug("onStart called")
def send_rm2(device):
result = {}
host = device['ip']
port = device['port']
mac = device['mac']
if mac[-3:] == 'sub':
logging.debug("This is a child device original mac is " + mac[:-4])
mac = mac[:-4]
name = device['name']
hex2send = device['hex2send']
product = broadlink.rm(host=(host, int(port)), mac=bytearray.fromhex(mac))
logging.debug("Connecting to Broadlink device with name " + name + "....")
product.auth()
logging.debug("Connected to Broadlink device with name " + name + "....")
product.send_data(hex2send.decode('hex'))
logging.debug("Code Sent....")
return
def setup_platform(hass, config, add_devices_callback, discovery_info=None):
"""Set up the Broadlink-controlled fan platform."""
name = config.get(CONF_NAME)
ip_addr = config.get(CONF_HOST)
mac_addr = binascii.unhexlify(config.get(CONF_MAC).encode().replace(b':', b''))
speed_list = config.get(CONF_CUSTOMIZE).get(CONF_SPEEDS, []) or DEFAULT_SPEED_LIST
if not STATE_OFF in speed_list:
speed_list.insert(0, STATE_OFF)
default_speed = config.get(CONF_DEFAULT_SPEED)
default_direction = config.get(CONF_DEFAULT_DIRECTION)
import broadlink
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to Broadlink RM Device")
rfcodes_ini_file = config.get(CONF_RFCODES_INI)
if rfcodes_ini_file.startswith("/"):
rfcodes_ini_file = rfcodes_ini_file[1:]
rfcodes_ini_path = hass.config.path(rfcodes_ini_file)
if os.path.exists(rfcodes_ini_path):
rfcodes_ini = ConfigParser()
rfcodes_ini.read(rfcodes_ini_path)
else:
_LOGGER.error("The ini file was not found. (" + rfcodes_ini_path + ")")
return
if DIRECTION_ANTICLOCKWISE in rfcodes_ini.sections() and DIRECTION_CLOCKWISE in rfcodes_ini.sections():
supported_features = SUPPORT_SPEED_AND_DIRECTION
else:
supported_features = LIMITED_SUPPORT
#if 'oscillate' in rfcodes_ini.sections():
# supported_features = supported_features | SUPPORT_OSCILLATE
add_devices_callback([
BroadlinkFan(hass, name, broadlink_device, rfcodes_ini, speed_list, default_speed, default_direction, supported_features)
])
def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
"""Set up the Broadlink IR Climate platform."""
name = config.get(CONF_NAME)
ip_addr = config.get(CONF_HOST)
mac_addr = binascii.unhexlify(config.get(CONF_MAC).encode().replace(b':', b''))
min_temp = config.get(CONF_MIN_TEMP)
max_temp = config.get(CONF_MAX_TEMP)
target_temp = config.get(CONF_TARGET_TEMP)
temp_sensor_entity_id = config.get(CONF_TEMP_SENSOR)
operation_list = config.get(CONF_CUSTOMIZE).get(CONF_OPERATIONS, []) or DEFAULT_OPERATION_LIST
fan_list = config.get(CONF_CUSTOMIZE).get(CONF_FAN_MODES, []) or DEFAULT_FAN_MODE_LIST
default_operation = config.get(CONF_DEFAULT_OPERATION)
default_fan_mode = config.get(CONF_DEFAULT_FAN_MODE)
default_operation_from_idle = config.get(CONF_DEFAULT_OPERATION_FROM_IDLE)
import broadlink
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to Broadlink RM Device")
ircodes_ini_file = config.get(CONF_IRCODES_INI)
if ircodes_ini_file.startswith("/"):
ircodes_ini_file = ircodes_ini_file[1:]
ircodes_ini_path = hass.config.path(ircodes_ini_file)
if os.path.exists(ircodes_ini_path):
ircodes_ini = ConfigParser()
ircodes_ini.read(ircodes_ini_path)
else:
_LOGGER.error("The ini file was not found. (" + ircodes_ini_path + ")")
return
async_add_devices([
BroadlinkIRClimate(hass, name, broadlink_device, ircodes_ini, min_temp, max_temp, target_temp, temp_sensor_entity_id, operation_list, fan_list, default_operation, default_fan_mode, default_operation_from_idle)
])
def send_cmd(self, to_host, to_mac, to_devtype="RM2"):
self.__build_cmd()
#device = broadlink.rm(host=("192.168.2.96",80), mac=bytearray.fromhex("34 ea 34 8a 35 ee"),devtype="RM2")
device = broadlink.rm(host=(to_host,80), mac=bytearray.fromhex(to_mac),devtype=to_devtype)
if (self._log):
print("Connecting to Broadlink device....")
device.auth()
time.sleep(1)
if (self._log):
print("Connected....")
time.sleep(1)
device.host
myhex = self.__StrHexCode
myhex = myhex.replace(' ', '').replace('\n', '')
myhex = myhex.encode('ascii', 'strict')
device.send_data(binascii.unhexlify(myhex))
if (self._log):
print("Code Sent....")
def broadlink_send_cmd(self, to_host, to_mac, to_devtype="RM2"):
self.__build_cmd()
#device = broadlink.rm(host=("192.168.2.96",80), mac=bytearray.fromhex("34 ea 34 8a 35 ee"),devtype="RM2")
device = broadlink.rm(host=(to_host,80), mac=bytearray.fromhex(to_mac),devtype=to_devtype)
if (self._log):
print("Connecting to Broadlink device....")
device.auth()
time.sleep(1)
if (self._log):
print("Connected....")
time.sleep(1)
device.host
myhex = self.__StrHexCode
myhex = myhex.replace(' ', '').replace('\n', '')
myhex = myhex.encode('ascii', 'strict')
device.send_data(binascii.unhexlify(myhex))
if (self._log):
print("Code Sent....")
async def async_setup_platform(hass,
config,
async_add_devices,
discovery_info=None):
"""Set up the Broadlink IR Media Player platform."""
name = config.get(CONF_NAME)
ip_addr = config.get(CONF_HOST)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
import broadlink
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to Broadlink RM Device")
ircodes_ini_file = config.get(CONF_IRCODES_INI)
if ircodes_ini_file.startswith("/"):
ircodes_ini_file = ircodes_ini_file[1:]
ircodes_ini_path = hass.config.path(ircodes_ini_file)
if os.path.exists(ircodes_ini_path):
ircodes_ini = ConfigParser()
ircodes_ini.optionxform = str
ircodes_ini.read(ircodes_ini_path)
else:
_LOGGER.error("The ini file was not found. (" + ircodes_ini_path + ")")
return
ping_host = config.get(CONF_PING_HOST)
power_cons_entity_id = config.get(CONF_POWER_CONS_SENSOR)
power_cons_threshold = config.get(CONF_POWER_CONS_THRESHOLD)
async_add_devices([
BroadlinkIRMediaPlayer(hass, name, broadlink_device, ircodes_ini,
ping_host, power_cons_entity_id,
power_cons_threshold)
], True)
def send_broadlink_code(code, retry_num=1):
global RMPRO_IP
global RMPRO_MAC
if (code != ""):
try:
# settings
device = broadlink.rm(host=(RMPRO_IP, 80),
mac=bytearray.fromhex(RMPRO_MAC),
devtype="rm")
device.auth()
for i in range(retry_num):
decode_hex = codecs.getdecoder("hex_codec")
device.send_data(decode_hex(code)[0])
return True
except Exception as e:
logger.error(e)
return False
else:
logger.error("Empty code value")
async def async_setup_platform(hass,
config,
async_add_entities,
discovery_info=None):
"""Set up the Broadlink remote."""
host = config[CONF_HOST]
mac_addr = config[CONF_MAC]
model = config[CONF_TYPE]
timeout = config[CONF_TIMEOUT]
name = config[CONF_NAME]
unique_id = f"remote_{hexlify(mac_addr).decode('utf-8')}"
if unique_id in hass.data.setdefault(DOMAIN, {}).setdefault(COMPONENT, []):
_LOGGER.error("Duplicate: %s", unique_id)
return
hass.data[DOMAIN][COMPONENT].append(unique_id)
if model in RM_TYPES:
api = blk.rm((host, DEFAULT_PORT), mac_addr, None)
else:
api = blk.rm4((host, DEFAULT_PORT), mac_addr, None)
api.timeout = timeout
device = BroadlinkDevice(hass, api)
code_storage = Store(hass, CODE_STORAGE_VERSION,
f"broadlink_{unique_id}_codes")
flag_storage = Store(hass, FLAG_STORAGE_VERSION,
f"broadlink_{unique_id}_flags")
remote = BroadlinkRemote(name, unique_id, device, code_storage,
flag_storage)
connected, loaded = await asyncio.gather(device.async_connect(),
remote.async_load_storage_files())
if not connected:
hass.data[DOMAIN][COMPONENT].remove(unique_id)
raise PlatformNotReady
if not loaded:
_LOGGER.error("Failed to set up %s", unique_id)
hass.data[DOMAIN][COMPONENT].remove(unique_id)
return
async_add_entities([remote], False)
def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
"""Set up the generic thermostat platform."""
import broadlink
ip_addr = config.get(CONF_HOST)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
name = config.get(CONF_NAME)
sensor_entity_id = config.get(CONF_SENSOR)
target_temp = config.get(CONF_TARGET_TEMP)
target_fan = config.get(CONF_TARGET_FAN)
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, "")
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
async_add_devices([
HitachiClimate(hass, name, target_temp, 'Low', 'off', broadlink_device,
sensor_entity_id)
])
def broadlinkConnect():
global device, isConnected
try:
if (Parameters["Mode3"] == 'RM2T' or Parameters["Mode3"] == 'RM2'):
device = broadlink.rm(host=(Parameters["Address"], 80),
mac=bytearray.fromhex(Parameters["Mode1"]),
devtype=Parameters["Mode3"])
elif (Parameters["Mode3"] == 'A1'):
device = broadlink.a1(host=(Parameters["Address"], 80),
mac=bytearray.fromhex(Parameters["Mode1"]),
devtype=Parameters["Mode3"])
elif (Parameters["Mode3"] == 'SP1'):
device = broadlink.sp1(host=(Parameters["Address"], 80),
mac=bytearray.fromhex(Parameters["Mode1"]),
devtype=Parameters["Mode3"])
elif (Parameters["Mode3"] == 'SP2' or Parameters["Mode3"] == 'SP3S'):
device = broadlink.sp2(host=(Parameters["Address"], 80),
mac=bytearray.fromhex(Parameters["Mode1"]),
devtype=Parameters["Mode3"])
elif (Parameters["Mode3"] == 'MP1'):
device = broadlink.mp1(host=(Parameters["Address"], 80),
mac=bytearray.fromhex(Parameters["Mode1"]),
devtype=Parameters["Mode3"])
else:
device = 'unknown'
device.auth()
#device.host
isConnected = True
Domoticz.Log("Connected to Broadlink device: " +
str(Parameters["Address"]))
except:
Domoticz.Error("Error Connecting to Broadlink device...." +
str(Parameters["Address"]))
isConnected = False
return False
return True
def checkmod(modname):
Sender = hvac_ir.get_sender(modname)
if Sender is None:
print("Unknown sender")
exit(2)
g = Sender()
g.send(Sender.POWER_ON, Sender.MODE_HEAT, Sender.FAN_AUTO, 24,
Sender.VDIR_SWING_DOWN, Sender.HDIR_SWING, False)
durations = g.get_durations()
# print(format_durations(durations))
# Uncommend the following to send code over Broadlink:
BROADLINK_IP = '192.168.0.10'
BROADLINK_MAC = 'B4:43:0D:C3:0B:2B'
#
bl = convert_bl(durations)
print(binascii.b2a_hex(bl))
mac = binascii.unhexlify(BROADLINK_MAC.encode().replace(b':', b''))
dev = broadlink.rm((BROADLINK_IP, 80), mac, 0x272a)
dev.auth()
dev.send_data(bl)
async def async_setup_platform(hass,
config,
async_add_devices,
discovery_info=None):
"""Set up platform."""
import broadlink
host = (config.get(CONF_HOST),
config.get(CONF_PORT))
mac = get_broadlink_mac(config.get(CONF_MAC))
link = broadlink.rm(
host,
mac,
None)
try:
await hass.async_add_job(link.auth)
except socket.timeout:
_LOGGER.warning("Timeout trying to authenticate to broadlink")
raise PlatformNotReady
async_add_devices([BroadlinkRM(link, config)])
yaml = YAML()
system_dictionary = yaml.load(content)
content = open(data_dir + "/tc2.yml", "r").read()
yaml = YAML()
mapping_dictionary = yaml.load(content)
code = mapping_dictionary["mapping_dictionary"][switch_item_name][
switch_item_status]
operations = ""
operations += "start"
try:
device = broadlink.rm(host=(system_dictionary["HW_RMPro"], 80),
mac=bytearray.fromhex(
system_dictionary["HW_RMPro_MAC"]),
devtype="rm")
operations += ", connecting"
device.auth()
operations += ", connected"
device.host
decode_hex = codecs.getdecoder("hex_codec")
device.send_data(decode_hex(code)[0])
operations += ", ==sent=="
except Exception as e:
print(e)
print("{}: {}".format(switch_item_name, operations))
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Broadlink switches."""
devices = config.get(CONF_SWITCHES)
slots = config.get("slots", {})
host = config.get(CONF_HOST)
mac_addr = config.get(CONF_MAC)
friendly_name = config.get(CONF_FRIENDLY_NAME)
model = config[CONF_TYPE]
retry_times = config.get(CONF_RETRY)
def generate_rm_switches(switches, broadlink_device):
"""Generate RM switches."""
return [
BroadlinkRMSwitch(
object_id,
config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
config.get(CONF_COMMAND_ON),
config.get(CONF_COMMAND_OFF),
retry_times,
) for object_id, config in switches.items()
]
def get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots[f"slot_{slot}"]:
return f"{switch_friendly_name} slot {slot}"
return slots[f"slot_{slot}"]
if model in RM_TYPES:
broadlink_device = blk.rm((host, DEFAULT_PORT), mac_addr, None)
hass.add_job(async_setup_service, hass, host, broadlink_device)
switches = generate_rm_switches(devices, broadlink_device)
elif model in RM4_TYPES:
broadlink_device = blk.rm4((host, DEFAULT_PORT), mac_addr, None)
hass.add_job(async_setup_service, hass, host, broadlink_device)
switches = generate_rm_switches(devices, broadlink_device)
elif model in SP1_TYPES:
broadlink_device = blk.sp1((host, DEFAULT_PORT), mac_addr, None)
switches = [
BroadlinkSP1Switch(friendly_name, broadlink_device, retry_times)
]
elif model in SP2_TYPES:
broadlink_device = blk.sp2((host, DEFAULT_PORT), mac_addr, None)
switches = [
BroadlinkSP2Switch(friendly_name, broadlink_device, retry_times)
]
elif model in MP1_TYPES:
switches = []
broadlink_device = blk.mp1((host, DEFAULT_PORT), mac_addr, None)
parent_device = BroadlinkMP1Switch(broadlink_device, retry_times)
for i in range(1, 5):
slot = BroadlinkMP1Slot(
get_mp1_slot_name(friendly_name, i),
broadlink_device,
i,
parent_device,
retry_times,
)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except OSError:
_LOGGER.error("Failed to connect to device")
add_entities(switches)
def get_device(cf):
device_type = cf.get('device_type', 'lookup')
if device_type == 'lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink device found')
sys.exit(2)
if len(devices) > 1:
logging.error('More than one Broadlink device found (' +
', '.join([
d.type + '/' + d.host[0] + '/' +
':'.join(format(s, '02x') for s in d.mac[::-1])
for d in devices
]) + ')')
sys.exit(2)
return configure_device(devices[0], topic_prefix)
elif device_type == 'multiple_lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink devices found')
sys.exit(2)
mqtt_multiple_prefix_format = cf.get('mqtt_multiple_subprefix_format',
None)
devices_dict = {}
for device in devices:
mqtt_subprefix = mqtt_multiple_prefix_format.format(
type=device.type,
host=device.host[0],
mac='_'.join(format(s, '02x') for s in device.mac),
mac_nic='_'.join(format(s, '02x') for s in device.mac[3::]))
device = configure_device(device, topic_prefix + mqtt_subprefix)
devices_dict[mqtt_subprefix] = device
return devices_dict
elif device_type == 'test':
return configure_device(TestDevice(cf), topic_prefix)
else:
host = (cf.get('device_host'), 80)
mac = bytearray.fromhex(cf.get('device_mac').replace(':', ' '))
if device_type == 'rm':
device = broadlink.rm(host=host, mac=mac, devtype=0x2712)
elif device_type == 'rm4':
device = broadlink.rm4(host=host, mac=mac, devtype=0x51da)
elif device_type == 'sp1':
device = broadlink.sp1(host=host, mac=mac, devtype=0)
elif device_type == 'sp2':
device = broadlink.sp2(host=host, mac=mac, devtype=0x2711)
elif device_type == 'a1':
device = broadlink.a1(host=host, mac=mac, devtype=0x2714)
elif device_type == 'mp1':
device = broadlink.mp1(host=host, mac=mac, devtype=0x4EB5)
elif device_type == 'dooya':
device = broadlink.dooya(host=host, mac=mac, devtype=0x4E4D)
elif device_type == 'bg1':
device = broadlink.bg1(host=host, mac=mac, devtype=0x51E3)
else:
logging.error('Incorrect device configured: ' + device_type)
sys.exit(2)
return configure_device(device, topic_prefix)
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Broadlink switches."""
devices = config.get(CONF_SWITCHES)
slots = config.get("slots", {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b":", b""))
switch_type = config.get(CONF_TYPE)
retry_times = config.get(CONF_RETRY)
def _get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots[f"slot_{slot}"]:
return f"{switch_friendly_name} slot {slot}"
return slots[f"slot_{slot}"]
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
hass.add_job(async_setup_service, hass, ip_addr, broadlink_device)
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
object_id,
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF),
retry_times,
))
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr, None)
switches = [
BroadlinkSP1Switch(friendly_name, broadlink_device, retry_times)
]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr, None)
switches = [
BroadlinkSP2Switch(friendly_name, broadlink_device, retry_times)
]
elif switch_type in MP1_TYPES:
switches = []
broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr, None)
parent_device = BroadlinkMP1Switch(broadlink_device, retry_times)
for i in range(1, 5):
slot = BroadlinkMP1Slot(
_get_mp1_slot_name(friendly_name, i),
broadlink_device,
i,
parent_device,
retry_times,
)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except OSError:
_LOGGER.error("Failed to connect to device")
add_entities(switches)
import sys
str_ip = "192.168.0.36"
str_mac = "34 ea 34 e3 a5 68"
try:
fileName = sys.argv[1]
except IndexError:
fileName = 'null'
if fileName == 'null':
print "Error - no file name parameter suffixed"
sys.exit()
else:
device = broadlink.rm(host=(str_ip, 80), mac=bytearray.fromhex(str_mac))
print "Connecting to Broadlink device...."
device.auth()
time.sleep(1)
print "Connected...."
time.sleep(1)
device.host
file = open(fileName, 'r')
myhex = file.read()
device.send_data(myhex.decode('hex'))
print "Code Sent...."
RealMACAddress = netaddr.EUI(RealMACAddress)
if DeviceName.strip() != '':
RealTimeout = DeviceTimeout.strip()
elif AlternativeTimeout.strip() != '':
RealTimeout = AlternativeTimeout.strip()
else:
RealTimeout = Settings.Timeout
if RealTimeout.strip() == '':
print('Timeout must exist in BlackBeanControl.ini or it should be entered as a command line parameter')
sys.exit(2)
else:
RealTimeout = int(RealTimeout.strip())
RM3Device = broadlink.rm((RealIPAddress, RealPort), RealMACAddress)
RM3Device.auth()
if ReKeyCommand:
if SettingsFile.has_option('Commands', SentCommand):
CommandFromSettings = SettingsFile.get('Commands', SentCommand)
if CommandFromSettings[0:4] != '2600':
RM3Key = RM3Device.key
RM3IV = RM3Device.iv
DecodedCommand = binascii.unhexlify(CommandFromSettings)
AESEncryption = AES.new(str(RM3Key), AES.MODE_CBC, str(RM3IV))
EncodedCommand = AESEncryption.encrypt(str(DecodedCommand))
FinalCommand = EncodedCommand[0x04:]
EncodedCommand = FinalCommand.encode('hex')
mac_nic='_'.join(format(s, '02x') for s in device.mac[2::-1]))
print(device,topic_prefix, mqtt_subprefix)
=======
mac='_'.join(format(s, '02x') for s in device.mac),
mac_nic='_'.join(format(s, '02x') for s in device.mac[3::]))
>>>>>>> upstream2/master
device = configure_device(device, topic_prefix + mqtt_subprefix)
devices_dict[mqtt_subprefix] = device
return devices_dict
elif device_type == 'test':
return configure_device(TestDevice(cf), topic_prefix)
else:
host = (cf.get('device_host'), 80)
mac = bytearray.fromhex(cf.get('device_mac').replace(':', ' '))
if device_type == 'rm':
device = broadlink.rm(host=host, mac=mac, devtype=0x2712)
elif device_type == 'rm4':
device = broadlink.rm4(host=host, mac=mac, devtype=0x51da)
elif device_type == 'sp1':
device = broadlink.sp1(host=host, mac=mac, devtype=0)
elif device_type == 'sp2':
device = broadlink.sp2(host=host, mac=mac, devtype=0x2711)
elif device_type == 'a1':
device = broadlink.a1(host=host, mac=mac, devtype=0x2714)
elif device_type == 'mp1':
device = broadlink.mp1(host=host, mac=mac, devtype=0x4EB5)
elif device_type == 'dooya':
device = broadlink.dooya(host=host, mac=mac, devtype=0x4E4D)
elif device_type == 'bg1':
device = broadlink.bg1(host=host, mac=mac, devtype=0x51E3)
else:
def get_device(cf, devices_dictionary={}):
device_type = cf.get('device_type', 'lookup')
if device_type == 'lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink device found')
sys.exit(2)
if len(devices) > 1:
logging.error('More than one Broadlink device found (' +
', '.join([
d.type + '/' + d.host[0] + '/' +
':'.join(format(s, '02x') for s in d.mac[::-1])
for d in devices
]) + ')')
sys.exit(2)
return configure_device(devices[0], topic_prefix)
elif device_type == 'multiple_lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink devices found')
sys.exit(2)
mqtt_multiple_prefix_format = cf.get('mqtt_multiple_subprefix_format',
None)
devices_dict = {}
for device in devices:
mqtt_subprefix = mqtt_multiple_prefix_format.format(
type=device.type,
host=device.host[0],
mac='_'.join(format(s, '02x') for s in device.mac[::-1]),
mac_nic='_'.join(format(s, '02x') for s in device.mac[2::-1]))
device = configure_device(device, topic_prefix + mqtt_subprefix)
devices_dict[mqtt_subprefix] = device
return devices_dict
elif device_type == 'test':
return configure_device(TestDevice(cf), topic_prefix)
elif device_type == 'dict':
global device_rescan_required
device_rescan_required = False
devices_list = json.loads(cf.get('devices_dict', '[]'))
mqtt_multiple_prefix_format = cf.get('mqtt_multiple_subprefix_format',
None)
for device in devices_list:
if pingOk(sHost=device['host'], count=3):
mac = bytearray.fromhex(device['mac'].replace(':', ' '))[::-1]
host = (device['host'], 80)
init_func = getattr(broadlink, device['class'])
deviceObj = init_func(host=host,
mac=mac,
devtype=int(device['devtype'], 0))
mqtt_subprefix = mqtt_multiple_prefix_format.format(
type=deviceObj.type,
host=deviceObj.host[0],
mac='_'.join(
format(s, '02x') for s in deviceObj.mac[::-1]),
mac_nic='_'.join(
format(s, '02x') for s in deviceObj.mac[2::-1]))
if mqtt_subprefix not in devices_dictionary:
device_configured = configure_device(
deviceObj, topic_prefix + mqtt_subprefix)
devices_dictionary[mqtt_subprefix] = device_configured
print("Type: %s, host: %s, MQTT subprefix: %s" %
(deviceObj.type, deviceObj.host, mqtt_subprefix))
if len(devices_list) != len(devices_dictionary):
device_rescan_required = True
logging.warning(
'Less devices are found than expected. Rescan is required.')
return devices_dictionary
else:
host = (cf.get('device_host'), 80)
mac = bytearray.fromhex(cf.get('device_mac').replace(':', ' '))
if device_type == 'rm':
device = broadlink.rm(host=host, mac=mac, devtype=0x2712)
elif device_type == 'rm4':
device = broadlink.rm4(host=host, mac=mac, devtype=0x51da)
elif device_type == 'sp1':
device = broadlink.sp1(host=host, mac=mac, devtype=0)
elif device_type == 'sp2':
device = broadlink.sp2(host=host, mac=mac, devtype=0x2711)
elif device_type == 'a1':
device = broadlink.a1(host=host, mac=mac, devtype=0x2714)
elif device_type == 'mp1':
device = broadlink.mp1(host=host, mac=mac, devtype=0x4EB5)
elif device_type == 'dooya':
device = broadlink.dooya(host=host, mac=mac, devtype=0x4E4D)
elif device_type == 'bg1':
device = broadlink.bg1(host=host, mac=mac, devtype=0x51E3)
elif device_type == 'SmartBulb':
device = broadlink.lb1(host=host, mac=mac, devtype=0x60c8)
else:
logging.error('Incorrect device configured: ' + device_type)
sys.exit(2)
return configure_device(device, topic_prefix)
def execute_command(
SentCommand,
DeviceName='',
ReKeyCommand=False,
AlternativeIPAddress='',
AlternativePort='',
AlternativeMACAddress='',
AlternativeTimeout=''
):
if SentCommand == '':
print('Command name parameter is mandatory')
return 2
if SentCommand == 'DISCOVER':
print('Scanning network for Broadlink devices ... ')
mydevices = broadlink.discover(timeout=5)
print(('Found ' + str(len(mydevices )) + ' broadlink device(s)'))
time.sleep(1)
for index, item in enumerate(mydevices):
mydevices[index].auth()
m = re.match(r"\('([0-9.]+)', ([0-9]+)", str(mydevices[index].host))
ipadd = m.group(1)
port = m.group(2)
macadd = str(''.join(format(x, '02x') for x in mydevices[index].mac[::-1]))
macadd = macadd[:2] + ":" + macadd[2:4] + ":" + macadd[4:6] + ":" + macadd[6:8] + ":" + macadd[8:10] + ":" + macadd[10:12]
print(('Device ' + str(index + 1) +':\nIPAddress = ' + ipadd + '\nPort = ' + port + '\nMACAddress = ' + macadd))
return
if (DeviceName != '') and (
(AlternativeIPAddress != '') or
(AlternativePort != '') or
(AlternativeMACAddress != '') or
(AlternativeTimeout != '')
):
print('Device name parameter can not be used in conjunction with IP Address/Port/MAC Address/Timeout parameters')
return 2
if (
(
(AlternativeIPAddress != '') or
(AlternativePort != '') or
(AlternativeMACAddress != '') or
(AlternativeTimeout != '')
) and (
(AlternativeIPAddress == '') or
(AlternativePort == '') or
(AlternativeMACAddress == '') or
(AlternativeTimeout == '')
)
):
print('IP Address, Port, MAC Address and Timeout parameters can not be used separately')
return 2
if DeviceName != '':
if SettingsFile.has_section(DeviceName):
if SettingsFile.has_option(DeviceName, 'IPAddress'):
DeviceIPAddress = SettingsFile.get(DeviceName, 'IPAddress')
else:
DeviceIPAddress = ''
if SettingsFile.has_option(DeviceName, 'Port'):
DevicePort = SettingsFile.get(DeviceName, 'Port')
else:
DevicePort = ''
if SettingsFile.has_option(DeviceName, 'MACAddress'):
DeviceMACAddress = SettingsFile.get(DeviceName, 'MACAddress')
else:
DeviceMACAddress = ''
if SettingsFile.has_option(DeviceName, 'Timeout'):
DeviceTimeout = SettingsFile.get(DeviceName, 'Timeout')
else:
DeviceTimeout = ''
else:
print('Device does not exist in BlackBeanControl.ini')
return 2
if (DeviceName != '') and (DeviceIPAddress == ''):
print('IP address must exist in BlackBeanControl.ini for the selected device')
return 2
if (DeviceName != '') and (DevicePort == ''):
print('Port must exist in BlackBeanControl.ini for the selected device')
return 2
if (DeviceName != '') and (DeviceMACAddress == ''):
print('MAC address must exist in BlackBeanControl.ini for the selected device')
return 2
if (DeviceName != '') and (DeviceTimeout == ''):
print('Timeout must exist in BlackBeanControl.ini for the selected device')
return 2
if DeviceName != '':
RealIPAddress = DeviceIPAddress
elif AlternativeIPAddress != '':
RealIPAddress = AlternativeIPAddress
else:
RealIPAddress = Settings.IPAddress
if RealIPAddress == '':
print('IP address must exist in BlackBeanControl.ini or it should be entered as a command line parameter')
return 2
if DeviceName != '':
RealPort = DevicePort
elif AlternativePort != '':
RealPort = AlternativePort
else:
RealPort = Settings.Port
if RealPort == '':
print('Port must exist in BlackBeanControl.ini or it should be entered as a command line parameter')
return 2
else:
RealPort = int(RealPort)
if DeviceName != '':
RealMACAddress = DeviceMACAddress
elif AlternativeMACAddress != '':
RealMACAddress = AlternativeMACAddress
else:
RealMACAddress = Settings.MACAddress
if RealMACAddress == '':
print('MAC address must exist in BlackBeanControl.ini or it should be entered as a command line parameter')
return 2
else:
RealMACAddress = netaddr.EUI(RealMACAddress)
if DeviceName != '':
RealTimeout = DeviceTimeout
elif AlternativeTimeout != '':
RealTimeout = AlternativeTimeout
else:
RealTimeout = Settings.Timeout
if RealTimeout == '':
print('Timeout must exist in BlackBeanControl.ini or it should be entered as a command line parameter')
return 2
else:
RealTimeout = int(RealTimeout)
RM3Device = broadlink.rm((RealIPAddress, RealPort), RealMACAddress)
RM3Device.auth()
if ReKeyCommand:
if SettingsFile.has_option('Commands', SentCommand):
CommandFromSettings = SettingsFile.get('Commands', SentCommand)
if CommandFromSettings[0:4] != '2600':
RM3Key = RM3Device.key
RM3IV = RM3Device.iv
DecodedCommand = binascii.unhexlify(CommandFromSettings)
AESEncryption = AES.new(str(RM3Key), AES.MODE_CBC, str(RM3IV))
EncodedCommand = AESEncryption.encrypt(str(DecodedCommand))
FinalCommand = EncodedCommand[0x04:]
EncodedCommand = binascii.hexlify(FinalCommand).decode("ascii")
BlackBeanControlIniFile = open(path.join(Settings.ApplicationDir, 'BlackBeanControl.ini'), 'w')
SettingsFile.set('Commands', SentCommand, EncodedCommand)
SettingsFile.write(BlackBeanControlIniFile)
BlackBeanControlIniFile.close()
sys.exit()
else:
print("Command appears to already be re-keyed.")
return 2
else:
print("Command not found in ini file for re-keying.")
return 2
if SettingsFile.has_option('Commands', SentCommand):
CommandFromSettings = SettingsFile.get('Commands', SentCommand)
else:
CommandFromSettings = ''
if CommandFromSettings != '':
DecodedCommand = binascii.unhexlify(CommandFromSettings)
RM3Device.send_data(DecodedCommand)
else:
RM3Device.enter_learning()
time.sleep(RealTimeout)
LearnedCommand = RM3Device.check_data()
if LearnedCommand is None:
print('Command not received')
sys.exit()
print(LearnedCommand)
# EncodedCommand = LearnedCommand.encode('hex')
EncodedCommand = binascii.hexlify(LearnedCommand).decode("ascii")
print(EncodedCommand)
if EncodedCommand:
BlackBeanControlIniFile = open(path.join(Settings.ApplicationDir, 'BlackBeanControl.ini'), 'w')
SettingsFile.set('Commands', SentCommand, EncodedCommand)
SettingsFile.write(BlackBeanControlIniFile)
BlackBeanControlIniFile.close()
print('Set command {0}'.format(SentCommand))
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES)
slots = config.get('slots', {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
async def _learn_command(call):
"""Handle a learn command."""
try:
auth = await hass.async_add_job(broadlink_device.auth)
except socket.timeout:
_LOGGER.error("Failed to connect to device, timeout")
return
if not auth:
_LOGGER.error("Failed to connect to device")
return
await hass.async_add_job(broadlink_device.enter_learning)
_LOGGER.info("Press the key you want Home Assistant to learn")
start_time = utcnow()
while (utcnow() - start_time) < timedelta(seconds=20):
packet = await hass.async_add_job(
broadlink_device.check_data)
if packet:
log_msg = "Received packet is: {}".\
format(b64encode(packet).decode('utf8'))
_LOGGER.info(log_msg)
hass.components.persistent_notification.async_create(
log_msg, title='Broadlink switch')
return
await asyncio.sleep(1, loop=hass.loop)
_LOGGER.error("Did not received any signal")
hass.components.persistent_notification.async_create(
"Did not received any signal", title='Broadlink switch')
async def _send_packet(call):
"""Send a packet."""
packets = call.data.get('packet', [])
for packet in packets:
for retry in range(DEFAULT_RETRY):
try:
extra = len(packet) % 4
if extra > 0:
packet = packet + ('=' * (4 - extra))
payload = b64decode(packet)
await hass.async_add_job(
broadlink_device.send_data, payload)
break
except (socket.timeout, ValueError):
try:
await hass.async_add_job(
broadlink_device.auth)
except socket.timeout:
if retry == DEFAULT_RETRY-1:
_LOGGER.error("Failed to send packet to device")
def _get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots['slot_{}'.format(slot)]:
return '{} slot {}'.format(switch_friendly_name, slot)
return slots['slot_{}'.format(slot)]
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
hass.services.register(DOMAIN, SERVICE_LEARN + '_' +
slugify(ip_addr.replace('.', '_')),
_learn_command)
hass.services.register(DOMAIN, SERVICE_SEND + '_' +
slugify(ip_addr.replace('.', '_')),
_send_packet,
vol.Schema({'packet': cv.ensure_list}))
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
object_id,
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)
)
)
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
elif switch_type in MP1_TYPES:
switches = []
broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr, None)
parent_device = BroadlinkMP1Switch(broadlink_device)
for i in range(1, 5):
slot = BroadlinkMP1Slot(
_get_mp1_slot_name(friendly_name, i),
broadlink_device, i, parent_device)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_entities(switches)
with open(os.path.join(__location__,'config.json')) as data_file:
config = json.load(data_file)
print "Device IP: " + config['str_ip'] +" Mac : " + config['str_mac'] +" !"
try:
fileName = sys.argv[1]
except IndexError:
fileName = 'null'
if fileName == 'null':
print "Error - no file name parameter suffixed"
sys.exit()
else:
device = broadlink.rm(host=(config['str_ip'],80), mac=bytearray.fromhex(config['str_mac']))
print "Connecting to Broadlink device...."
device.auth()
time.sleep(1)
print "Connected...."
time.sleep(1)
device.host
print os.path.join(__location__,fileName)
file = open(os.path.join(__location__,fileName), 'r')
myhex = file.read()
device.send_data(myhex.decode('hex'))
print "Code Sent...."
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES, {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
@asyncio.coroutine
def _learn_command(call):
try:
auth = yield from hass.async_add_job(broadlink_device.auth)
except socket.timeout:
_LOGGER.error("Failed to connect to device, timeout")
return
if not auth:
_LOGGER.error("Failed to connect to device")
return
yield from hass.async_add_job(broadlink_device.enter_learning)
_LOGGER.info("Press the key you want HASS to learn")
start_time = utcnow()
while (utcnow() - start_time) < timedelta(seconds=20):
packet = yield from hass.async_add_job(
broadlink_device.check_data)
if packet:
log_msg = "Recieved packet is: {}".\
format(b64encode(packet).decode('utf8'))
_LOGGER.info(log_msg)
hass.components.persistent_notification.async_create(
log_msg, title='Broadlink switch')
return
yield from asyncio.sleep(1, loop=hass.loop)
_LOGGER.error("Did not received any signal")
hass.components.persistent_notification.async_create(
"Did not received any signal", title='Broadlink switch')
@asyncio.coroutine
def _send_packet(call):
packets = call.data.get('packet', [])
for packet in packets:
for retry in range(DEFAULT_RETRY):
try:
payload = b64decode(packet)
yield from hass.async_add_job(
broadlink_device.send_data, payload)
break
except (socket.timeout, ValueError):
try:
yield from hass.async_add_job(
broadlink_device.auth)
except socket.timeout:
if retry == DEFAULT_RETRY-1:
_LOGGER.error("Failed to send packet to device")
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
hass.services.register(DOMAIN, SERVICE_LEARN + '_' +
ip_addr.replace('.', '_'), _learn_command)
hass.services.register(DOMAIN, SERVICE_SEND + '_' +
ip_addr.replace('.', '_'), _send_packet)
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)
)
)
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_devices(switches)
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES, {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
persistent_notification = loader.get_component('persistent_notification')
@asyncio.coroutine
def _learn_command(call):
try:
auth = yield from hass.async_add_job(broadlink_device.auth)
except socket.timeout:
_LOGGER.error("Failed to connect to device, timeout")
return
if not auth:
_LOGGER.error("Failed to connect to device")
return
yield from hass.async_add_job(broadlink_device.enter_learning)
_LOGGER.info("Press the key you want HASS to learn")
start_time = utcnow()
while (utcnow() - start_time) < timedelta(seconds=20):
packet = yield from hass.async_add_job(broadlink_device.check_data)
if packet:
log_msg = "Recieved packet is: {}".\
format(b64encode(packet).decode('utf8'))
_LOGGER.info(log_msg)
persistent_notification.async_create(hass,
log_msg,
title='Broadlink switch')
return
yield from asyncio.sleep(1, loop=hass.loop)
_LOGGER.error("Did not received any signal")
persistent_notification.async_create(hass,
"Did not received any signal",
title='Broadlink switch')
@asyncio.coroutine
def _send_packet(call):
packets = call.data.get('packet', [])
for packet in packets:
for retry in range(DEFAULT_RETRY):
try:
payload = b64decode(packet)
yield from hass.async_add_job(broadlink_device.send_data,
payload)
break
except (socket.timeout, ValueError):
try:
yield from hass.async_add_job(broadlink_device.auth)
except socket.timeout:
if retry == DEFAULT_RETRY - 1:
_LOGGER.error("Failed to send packet to device")
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
hass.services.register(DOMAIN,
SERVICE_LEARN + '_' + ip_addr.replace('.', '_'),
_learn_command)
hass.services.register(DOMAIN,
SERVICE_SEND + '_' + ip_addr.replace('.', '_'),
_send_packet)
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device, device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)))
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_devices(switches)
import broadlink, sys, time
ip = sys.argv[1]
macaddr = sys.argv[2]
state = sys.argv[3]
try:
broadlink.rm(host=(ip, 80), mac=bytearray.fromhex(macaddr))
# it mean that is not a rm device
if (state != "3"):
device = broadlink.sp2(host=(ip, 80), mac=bytearray.fromhex(macaddr))
device.auth()
time.sleep(3)
# Add option to only check power without change it
if state == "2":
print device.check_power()
elif state == "1":
device.set_power(True)
print "on"
elif state == "0":
device.set_power(False)
print "off"
else:
device = broadlink.rm(host=(ip, 80), mac=bytearray.fromhex(macaddr))
device.auth()
time.sleep(3)
ir_value = sys.argv[4]
if ir_value != "CheckAlive":
RealMACAddress = netaddr.EUI(RealMACAddress)
if DeviceName.strip() != '':
RealTimeout = DeviceTimeout.strip()
elif AlternativeTimeout.strip() != '':
RealTimeout = AlternativeTimeout.strip()
else:
RealTimeout = Settings.Timeout
if RealTimeout.strip() == '':
print('Timeout must exist in BlackBeanControl.ini or it should be entered as a command line parameter')
sys.exit(2)
else:
RealTimeout = int(RealTimeout.strip())
RM3Device = broadlink.rm((RealIPAddress, RealPort), RealMACAddress)
RM3Device.auth()
RM3Key = RM3Device.key
RM3IV = RM3Device.iv
if SettingsFile.has_option('Commands', SentCommand):
CommandFromSettings = SettingsFile.get('Commands', SentCommand)
else:
CommandFromSettings = ''
if CommandFromSettings.strip() != '':
DecodedCommand = binascii.unhexlify(CommandFromSettings)
AESEncryption = AES.new(str(RM3Key), AES.MODE_CBC, str(RM3IV))
EncodedCommand = AESEncryption.encrypt(str(DecodedCommand))
#!/usr/bin/python
import broadlink
import time
import sys
device = broadlink.rm(host=("ip_of_broadlink_rm", 80),
mac=bytearray.fromhex("mac_address_of_broadlink_rm"))
device.auth()
device.host
myhex = "get_your_hex_code"
device.send_data(myhex.decode('hex'))
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up the Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES)
slots = config.get('slots', {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
@asyncio.coroutine
def _learn_command(call):
"""Handle a learn command."""
try:
auth = yield from hass.async_add_job(broadlink_device.auth)
except socket.timeout:
_LOGGER.error("Failed to connect to device, timeout")
return
if not auth:
_LOGGER.error("Failed to connect to device")
return
yield from hass.async_add_job(broadlink_device.enter_learning)
_LOGGER.info("Press the key you want Home Assistant to learn")
start_time = utcnow()
while (utcnow() - start_time) < timedelta(seconds=20):
packet = yield from hass.async_add_job(broadlink_device.check_data)
if packet:
log_msg = "Received packet is: {}".\
format(b64encode(packet).decode('utf8'))
_LOGGER.info(log_msg)
hass.components.persistent_notification.async_create(
log_msg, title='Broadlink switch')
return
yield from asyncio.sleep(1, loop=hass.loop)
_LOGGER.error("Did not received any signal")
hass.components.persistent_notification.async_create(
"Did not received any signal", title='Broadlink switch')
@asyncio.coroutine
def _send_packet(call):
"""Send a packet."""
packets = call.data.get('packet', [])
for packet in packets:
for retry in range(DEFAULT_RETRY):
try:
extra = len(packet) % 4
if extra > 0:
packet = packet + ('=' * (4 - extra))
payload = b64decode(packet)
yield from hass.async_add_job(broadlink_device.send_data,
payload)
break
except (socket.timeout, ValueError):
try:
yield from hass.async_add_job(broadlink_device.auth)
except socket.timeout:
if retry == DEFAULT_RETRY - 1:
_LOGGER.error("Failed to send packet to device")
def _get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots['slot_{}'.format(slot)]:
return '{} slot {}'.format(switch_friendly_name, slot)
return slots['slot_{}'.format(slot)]
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
hass.services.register(DOMAIN,
SERVICE_LEARN + '_' + ip_addr.replace('.', '_'),
_learn_command)
hass.services.register(DOMAIN,
SERVICE_SEND + '_' + ip_addr.replace('.', '_'),
_send_packet,
vol.Schema({'packet': cv.ensure_list}))
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device, device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)))
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
elif switch_type in MP1_TYPES:
switches = []
broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr)
parent_device = BroadlinkMP1Switch(broadlink_device)
for i in range(1, 5):
slot = BroadlinkMP1Slot(_get_mp1_slot_name(friendly_name, i),
broadlink_device, i, parent_device)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_devices(switches)
#--- Script ---#
try:
fileName_0 = sys.argv[1]
except IndexError:
fileName_0 = 'null'
if fileName_0 == 'null':
print "Erreur - arguments non-valides"
print "Utilisation: play_multi.py <délai> <fichier 1> <délai> <fichier 2>..."
sys.exit()
else:
device = broadlink.rm((ip, port), mac, timeout)
arg_list = list(sys.argv)
arg_numb = len(sys.argv)
var_time = 1
var_agmt = 2
print "Connexion au module Broadlink..."
device.auth()
time.sleep(1)
print "Connecté..."
time.sleep(1)
device.host
while not var_time == arg_numb: