def OnKeyDown(self, e):
k = e.GetKeyCode()
if k == wx.WXK_UP:
sel = cad.GetSelectedObjects()
index = -1
if len(sel) > 0:
index = self.ObjectRenderedIndex(sel[-1])
if index > 0:
index -= 1
if (index == -1) and (len(self.rendered_objects) > 0):
index = len(self.rendered_objects) - 1
cad.ClearSelection(True)
if len(self.rendered_objects):
cad.Select(self.rendered_objects[index])
elif k == wx.WXK_DOWN:
sel = cad.GetSelectedObjects()
index = -1
if len(sel) > 0:
index = self.ObjectRenderedIndex(sel[-1])
if index < len(self.rendered_objects) - 1:
index += 1
if (index == -1) and (len(self.rendered_objects) > 0):
index = 0
cad.ClearSelection(True)
if len(self.rendered_objects):
cad.Select(self.rendered_objects[index])
else:
wx.GetApp().OnKeyDown(e)
def OnLeftClick(self, event):
if not event.controlDown:
# check for nc code block clicked
if self.select_mode.filter.IsTypeInFilter(cam.GetNcCodeBlockType()):
mask = cad.Filter()
mask.AddType(cam.GetNcCodeBlockType())
objects = cad.ObjectsUnderWindow(cad.IRect(self.select_mode.button_down_point.x, self.select_mode.button_down_point.y), False, True, mask, False)
if len(objects):
block = objects[0]
cad.ClearSelection()
cad.Select(block)
block.__class__ = cam.NcCodeBlock
self.output_window.viewport.SelectLine(block.line_number, True)
wx.GetApp().frame.graphics_canvas.Refresh()
self.output_window.Refresh()
return
program = wx.GetApp().program
if program != None:
nccode = program.nccode
if nccode != None:
nccode.nc_code.SetHighlightedBlock(None)
# do the default click behaviour
SolidApp.OnLeftClick(self, event)
def OnLeftClick(self, event):
# select one object
objects = cad.ObjectsUnderWindow(cad.IRect(self.select_mode.button_down_point.x, self.select_mode.button_down_point.y), False, True, self.select_mode.filter, True)
if len(objects) > 0:
object = objects[0]
if event.controlDown:
if cad.ObjectMarked(object):
cad.Unselect(object, True)
else:
cad.Select(object)
else:
cad.ClearSelection(True)
cad.Select(object)
else:
cad.ClearSelection(True)
def MakeGCode(self):
wx.GetApp().attached_to_surface = None
self.number_for_stl_file = 1
wx.GetApp().tool_number = 0
# import the relevant machine
machine_module = __import__('nc.' + self.machine.post,
fromlist=['dummy'])
import importlib
importlib.reload(machine_module)
output(self.GetOutputFileName())
program_begin(self.GetID(), self.GetTitle())
absolute()
if self.units > 25.0:
imperial()
else:
metric()
set_plane(0)
if self.path_control_mode != PATH_CONTROL_UNDEFINED:
set_path_control_mode(self.path_control_mode,
self.motion_blending_tolerance,
self.naive_cam_tolerance)
for tool in self.tools.GetChildren():
tool.DoGCodeCalls()
surfaces_written = {}
patterns_written = {}
for op in self.operations.GetChildren():
if op.active:
surface = cad.GetObjectFromId(Surface.type, op.surface)
if surface != None: import attach
surface_apply_before_pattern = (
surface !=
None) and not surface.same_for_each_pattern_position
surface_apply_after_pattern = (
surface != None) and surface.same_for_each_pattern_position
if surface_apply_before_pattern:
self.ApplySurfaceToText(surface, surfaces_written)
tranform_begun = self.ApplyPatternToText(
op.pattern, patterns_written)
if surface_apply_after_pattern:
self.ApplySurfaceToText(surface, surfaces_written)
failure = op.DoGCodeCalls()
if surface_apply_after_pattern: attach.attach_end()
if tranform_begun: transform.transform_end()
if surface_apply_before_pattern: attach.attach_end()
wx.GetApp().attached_to_surface = None
if failure:
wx.MessageBox(failure)
cad.Select(op)
return
program_end()
def AddObjectFromButton(self, new_object):
cad.StartHistory()
cad.AddUndoably(new_object, None, None)
cad.ClearSelection(True)
cad.Select(new_object)
self.SetInputMode(self.select_mode)
cad.EndHistory()
cad.Repaint()
def OnLabelLeftDown(self, object, event):
if event.ShiftDown():
self.waiting_until_left_up = cad.ShiftSelect(
object, event.ControlDown())
else:
# shift not down
if event.ControlDown():
if cad.ObjectMarked(object):
cad.Unselect(object, True)
else:
cad.Select(object, True)
else:
if cad.ObjectMarked(object):
self.waiting_until_left_up = True
cad.Select(object, True)
else:
cad.ClearSelection(False)
cad.Select(object, True)
def OnLeftDown(self, event):
# select the block clicked on
line_number = self.viewport.GetCurrentLine(
) + event.y / self.viewport.GetPixelsPerLine()
block = self.viewport.GetBlockAtLine(int(line_number))
cad.ClearSelection()
cad.Select(block)
self.viewport.SelectLine(line_number, False)
wx.GetApp().frame.graphics_canvas.Refresh()
self.Refresh()
def OffsetSketch(self, object):
config = HeeksConfig()
value = config.ReadFloat('SketchOffsetValue', 1.0)
value = self.InputLength('Offset Sketch', 'Offset Value +ve for Outwards -ve for Inwards', value)
if value == None: return
sketch = object
sketch.__class__ = cad.Sketch
area = sketch.GetArea()
area.Reorder()
area.Offset(-value)
new_object = cad.NewSketchFromArea(area)
cad.AddUndoably(new_object)
cad.ClearSelection()
cad.Select(new_object)
def OnSetOriginPoints(self, three_points):
mat = cad.GetDrawMatrix(False)
o = geom.Point3D(0,0,0).Transformed(mat)
x = geom.Point3D(1,0,0).Transformed(mat) - o
y = geom.Point3D(0,1,0).Transformed(mat) - o
new_object = cad.NewCoordinateSystem("Coordinate System", o, x, y)
cad.ClearSelection()
self.SetInputMode(self.select_mode)
# and pick from three points
result = self.MakeOriginFromPickPoints(new_object, three_points)
if result:
cad.AddUndoably(new_object)
cad.Select(new_object)
else:
cad.DeleteInternalObject(new_object)
def FaceToSketch(self, object):
sketch = step.NewSketchFromFace(object)
cad.AddUndoably(sketch)
cad.Select(sketch)
def ChamferEdge(self, object):
cad.ClearSelection()
cad.Select(object)
self.OnChamfer(None)
def BlendEdge(self, object):
cad.ClearSelection()
cad.Select(object)
self.OnFillet(None)
def FaceRadiusChange(self, object):
sketch = step.NewSketchFromFace(object)
cad.AddUndoably(sketch)
cad.Select(sketch)
def Run(self, event):
if not self.control_pressed:
cad.ClearSelection(False)
cad.Select(self.object)
def OnLabelRightDown(self, object, event):
if not cad.ObjectMarked(object):
cad.ClearSelection(False)
cad.Select(object, True)
def OnMouse(self, event):
# to do? if(wxGetApp().m_property_grid_validation)return;
if event.Entering():
self.SetFocus() # so middle wheel works
if event.LeftDown():
button = self.HitTest(event.GetPosition())
if button:
if button.type == ButtonTypePlus or button.type == ButtonTypeMinus:
self.SetExpanded(button.obj, button.type == ButtonTypePlus)
self.SetVirtualSize(self.GetRenderSize())
self.Refresh()
else:
self.OnLabelLeftDown(button.obj, event)
self.clicked_object = button.obj
else:
cad.ClearSelection(True)
self.button_down_point = event.GetPosition()
if event.LeftUp():
if self.dragging:
self.dragging = False
# find the object to drop on to
button = self.HitTest(event.GetPosition())
if (button == None) or not cad.ObjectMarked(
button.obj
): # can only drop on to an item other than one of the items being dragged
# test drop possible
drag_possible = True
add_to = cad.GetApp()
if button and button.paste_into: add_to = button.paste_into
for object in self.dragged_list:
if not add_to.CanAdd(object) or not object.CanAddTo(
add_to):
drag_possible = False
break
if drag_possible:
cad.StartHistory()
# cut the objects
cad.DeleteObjectsUndoably(self.dragged_list)
# paste the objects
for object in self.dragged_list:
if object.OneOfAKind():
one_found = False
child = add_to.GetFirstChild()
while child:
if child.GetType() == object.GetType():
child.CopyFrom(object)
one_found = True
break
child = add_to.GetNextChild()
if not one_found:
cad.AddUndoably(
object, add_to, button.paste_before if
(button != None) else None)
else:
cad.AddUndoably(
object, add_to, button.paste_before if
(button != None) else None)
cad.EndHistory()
else:
self.Refresh()
else:
self.Refresh()
else:
if self.waiting_until_left_up:
cad.ClearSelection(False)
cad.Select(self.clicked_object, True)
self.waiting_until_left_up = False
if event.RightDown():
button = self.HitTest(event.GetPosition())
self.clicked_object = None
if (button != None) and (button.type == ButtonTypeLabelBefore
or button.type == ButtonTypeLabel):
self.clicked_object = button.obj
self.OnLabelRightDown(button.obj, event)
if event.RightUp():
if self.dragging:
self.dragging = False
else:
tools = self.GetDropDownTools(event.ControlDown())
menu = wx.Menu()
for tool in tools:
wx.GetApp().AddToolToListAndMenu(tool, menu)
self.PopupMenu(menu, event.GetPosition())
if event.Dragging():
if event.LeftIsDown() or event.RightIsDown():
if (not self.dragging) and (
math.fabs(self.button_down_point.x - event.GetX()) > 2
or math.fabs(self.button_down_point.y - event.GetY()) >
2):
self.dragging = True
self.dragged_list = cad.GetSelectedObjects()
if self.dragging:
self.drag_position = self.CalcUnscrolledPosition(
event.GetPosition())
button = self.HitTest(event.GetPosition())
self.drag_paste_rect = wx.Rect(0, 0, 0, 0)
if (button != None) and (button.type == ButtonTypeLabelBefore):
self.drag_paste_rect = button.rect
self.Refresh()
if event.LeftDClick():
if self.clicked_object:
wx.GetApp().EditUndoably(self.clicked_object)
event.Skip()
