def exercise(space_group_info, n_scatterers=8, d_min=2, verbose=0, e_min=1.5):
structure = random_structure.xray_structure(
space_group_info,
elements=["const"] * n_scatterers,
volume_per_atom=200,
min_distance=3.0,
general_positions_only=True,
u_iso=0.0,
)
if 0 or verbose:
structure.show_summary().show_scatterers()
f_calc = structure.structure_factors(d_min=d_min, anomalous_flag=False).f_calc()
f_obs = abs(f_calc)
q_obs = miller.array(
miller_set=f_obs,
data=f_obs.data() / math.sqrt(f_obs.space_group().order_p() * n_scatterers) / f_obs.space_group().n_ltr(),
)
q_obs = q_obs.sort(by_value="abs")
q_obs.setup_binner(auto_binning=True)
n_obs = q_obs.quasi_normalize_structure_factors()
r = flex.linear_regression(q_obs.data(), n_obs.data())
if 0 or verbose:
r.show_summary()
assert r.is_well_defined()
assert abs(r.y_intercept()) < 0.1
assert abs(r.slope() - 1) < 0.2
q_large = q_obs.select(q_obs.quasi_normalized_as_normalized().data() > e_min)
if 0 or verbose:
print "Number of e-values > %.6g: %d" % (e_min, q_large.size())
other_structure = random_structure.xray_structure(
space_group_info,
elements=["const"] * n_scatterers,
volume_per_atom=200,
min_distance=3.0,
general_positions_only=True,
u_iso=0.0,
)
assert other_structure.unit_cell().is_similar_to(structure.unit_cell())
q_calc = q_large.structure_factors_from_scatterers(other_structure, algorithm="direct").f_calc()
start = q_large.phase_transfer(q_calc.data())
for selection_fixed in (None, flex.double([random.random() for i in xrange(start.size())]) < 0.4):
from_map_data = direct_space_squaring(start, selection_fixed)
direct_space_result = start.phase_transfer(phase_source=from_map_data)
new_phases = reciprocal_space_squaring(start, selection_fixed, verbose)
reciprocal_space_result = start.phase_transfer(phase_source=flex.polar(1, new_phases))
mwpe = direct_space_result.mean_weighted_phase_error(reciprocal_space_result)
if 0 or verbose:
print "mwpe: %.2f" % mwpe, start.space_group_info()
for i, h in enumerate(direct_space_result.indices()):
amp_d, phi_d = complex_math.abs_arg(direct_space_result.data()[i], deg=True)
amp_r, phi_r = complex_math.abs_arg(reciprocal_space_result.data()[i], deg=True)
phase_err = scitbx.math.phase_error(phi_d, phi_r, deg=True)
assert phase_err < 1.0 or abs(from_map_data[i]) < 1.0e-6
exercise_truncate(q_large)
def test_grid_step(n_sites = 50,
volume_per_atom = 50,
d_min = 2.0):
grid_step = (0.2,0.4,0.6,0.7,0.9,1.0)
for step in grid_step:
symmetry = crystal.symmetry(space_group_symbol="P1")
structure = random_structure.xray_structure(space_group_info = symmetry.space_group_info(),
elements=["C"]*n_sites,
volume_per_atom=volume_per_atom,
random_u_iso=False)
fc = structure.structure_factors(d_min = d_min,
anomalous_flag=False,
algorithm="fft").f_calc()
manager = max_like_non_uniform.ordered_solvent_distribution(
structure = structure,
fo = fc,
grid_step = step)
f_water_dist = manager.fcalc_from_distribution()
### check phase compatibility with the symmetry:
centrics = f_water_dist.select_centric()
if(centrics.indices().size() > 0):
ideal = centrics.phase_transfer(centrics)
assert flex.max(flex.abs(ideal.data() - centrics.data())) < 1.e-6
###
#print "max = ", flex.max( flex.abs( f_water_dist.data() ) )
#print "min = ", flex.min( flex.abs( f_water_dist.data() ) )
#print "ave = ", flex.mean( flex.abs( f_water_dist.data() ) )
assert flex.max( flex.abs( f_water_dist.data() ) ) < 1.0
def exercise_subtract_continuous_allowed_origin_shifts(
space_group_info,
use_niggli_cell,
n_elements=3):
structure = random_structure.xray_structure(
space_group_info,
elements=["Si"]*n_elements,
volume_per_atom=300,
min_distance=3.,
general_positions_only=False)
if (use_niggli_cell):
structure = structure.niggli_cell()
f_obs = abs(structure.structure_factors(
d_min=3, algorithm="direct").f_calc())
assert f_obs.indices().size() >= 10
transl = matrix.col(flex.random_double_point_on_sphere()) * 2.345
transl_no_cont = matrix.col(
structure.subtract_continuous_allowed_origin_shifts(
translation_cart=transl))
transl_cont = transl - transl_no_cont
structure_transl = structure.apply_shift(
shift=structure.unit_cell().fractionalize(transl_cont),
recompute_site_symmetries=True)
f_transl = abs(f_obs.structure_factors_from_scatterers(
xray_structure=structure_transl, algorithm="direct").f_calc())
assert approx_equal(f_transl.data(), f_obs.data())
def exercise_twin_detwin () :
random.seed(12345)
flex.set_random_seed(12345)
xrs = random_structure.xray_structure(
unit_cell=(12,5,12,90,90,90),
space_group_symbol="P1",
n_scatterers=12,
elements="random")
fc = abs(xrs.structure_factors(d_min=1.5).f_calc())
fc = fc.set_observation_type_xray_amplitude()
mtz_file = "tmp_massage_in.mtz"
fc.as_mtz_dataset(column_root_label="F").mtz_object().write(mtz_file)
massage_data.run(
args=[
mtz_file,
"aniso.action=None",
"outlier.action=None",
"symmetry.action=twin",
"twin_law='l,-k,h'",
"fraction=0.3",
"hklout=tmp_massage_twinned.mtz",
],
out=null_out())
assert op.isfile("tmp_massage_twinned.mtz")
mtz_in = file_reader.any_file("tmp_massage_twinned.mtz")
fc_twin = mtz_in.file_server.miller_arrays[0].f_sq_as_f()
fc_twin, fc_tmp = fc_twin.common_sets(other=fc)
for hkl, f1, f2 in zip(fc_tmp.indices(), fc_tmp.data(), fc_twin.data()) :
if (abs(hkl[0]) != abs(hkl[2])) :
assert not approx_equal(f1, f2, eps=0.01, out=null_out()), (hkl, f1, f2)
massage_data.run(
args=[
mtz_file,
"aniso.action=None",
"outlier.action=None",
"symmetry.action=twin",
"twin_law='l,-k,h'",
"fraction=0.3",
"hklout=tmp_massage_twinned.sca",
],
out=null_out())
assert op.isfile("tmp_massage_twinned.sca")
massage_data.run(
args=[
"tmp_massage_twinned.mtz",
"aniso.action=None",
"outlier.action=None",
"symmetry.action=detwin",
"twin_law='l,-k,h'",
"fraction=0.3",
"hklout=tmp_massage_detwinned.mtz",
],
out=null_out())
mtz_in = file_reader.any_file("tmp_massage_detwinned.mtz")
fc_detwin = mtz_in.file_server.miller_arrays[0].f_sq_as_f()
fc_detwin, fc_tmp = fc_detwin.common_sets(other=fc)
# XXX we appear to lose some accuracy here, possibly due to the use of
# MTZ format
for hkl, f1, f2 in zip(fc_tmp.indices(), fc_tmp.data(), fc_detwin.data()) :
assert approx_equal(f1, f2, eps=0.01), hkl
def exercise_xray_structure(use_u_aniso, verbose=0):
structure = random_structure.xray_structure(
space_group_info=sgtbx.space_group_info("P 31"),
elements=["N", "C", "C", "O", "Si"] * 2,
volume_per_atom=500,
min_distance=2.0,
general_positions_only=False,
random_u_iso=True,
use_u_aniso=use_u_aniso,
)
f_abs = abs(structure.structure_factors(anomalous_flag=False, d_min=2, algorithm="direct").f_calc())
for resname in (None, "res"):
for fractional_coordinates in (False, True):
pdb_file = structure.as_pdb_file(
remark="Title", remarks=["Any", "Thing"], fractional_coordinates=fractional_coordinates, resname=resname
)
if 0 or verbose:
sys.stdout.write(pdb_file)
structure_read = iotbx.pdb.input(
source_info=None, lines=flex.std_string(pdb_file.splitlines())
).xray_structure_simple(fractional_coordinates=fractional_coordinates, use_scale_matrix_if_available=False)
f_read = abs(
f_abs.structure_factors_from_scatterers(xray_structure=structure_read, algorithm="direct").f_calc()
)
regression = flex.linear_regression(f_abs.data(), f_read.data())
assert regression.is_well_defined()
if 0 or verbose:
regression.show_summary()
assert approx_equal(regression.slope(), 1, eps=1.0e-2)
assert approx_equal(regression.y_intercept(), 0, eps=flex.max(f_abs.data()) * 0.01)
def get_xray_structure_random(space_group_info):
xray_structure = random_structure.xray_structure(
space_group_info = space_group_info,
elements = ["N"]*100,
volume_per_atom = 50.0,
random_u_iso = True)
return xray_structure
def exercise_sdb(verbose=0):
structure = random_structure.xray_structure(
space_group_info=sgtbx.space_group_info("P 31"),
elements=["N","C","C","O"]*2,
volume_per_atom=500,
min_distance=2.,
general_positions_only=False,
random_u_iso=True)
f_abs = abs(structure.structure_factors(
anomalous_flag=False, d_min=2, algorithm="direct").f_calc())
sdb_out = structure.as_cns_sdb_file(
file="foo.sdb",
description="random_structure",
comment=["any", "thing"],
group="best")
if (0 or verbose):
sys.stdout.write(sdb_out)
sdb_files = sdb_reader.multi_sdb_parser(StringIO(sdb_out))
assert len(sdb_files) == 1
structure_read = sdb_files[0].as_xray_structure(
crystal_symmetry=crystal.symmetry(
unit_cell=structure.unit_cell(),
space_group_info=None))
f_read = abs(f_abs.structure_factors_from_scatterers(
xray_structure=structure_read, algorithm="direct").f_calc())
regression = flex.linear_regression(f_abs.data(), f_read.data())
assert regression.is_well_defined()
if (0 or verbose):
regression.show_summary()
assert abs(regression.slope()-1) < 1.e-4
assert abs(regression.y_intercept()) < 1.e-3
def exercise_translational_phase_shift(n_sites=100,
d_min=1.5,
resolution_factor=0.3):
sgi = space_group_info("P1")
xrs = random_structure.xray_structure(
space_group_info=sgi,
elements=(("O", "N", "C") * (n_sites // 3 + 1))[:n_sites],
volume_per_atom=50,
min_distance=1.5)
f_calc = xrs.structure_factors(d_min=d_min).f_calc()
print f_calc.unit_cell()
from scitbx.matrix import col
shift_frac = col((.23984120, .902341127, .51219021))
# Shift phases directly
phase_shifted = f_calc.translational_shift(shift_frac=shift_frac)
# Check that map from phase_shifted FC matches map calculated from
# translated xrs
# Map from phase-shifted FC
shifted_fft_map = phase_shifted.fft_map(
resolution_factor=resolution_factor)
shifted_fft_map.apply_sigma_scaling()
shifted_map_data = shifted_fft_map.real_map_unpadded()
cs = xrs.crystal_symmetry()
from cctbx.maptbx import crystal_gridding
cg = crystal_gridding(unit_cell=cs.unit_cell(),
space_group_info=cs.space_group_info(),
pre_determined_n_real=shifted_map_data.all())
# Map from translated xrs
sites_shifted = xrs.sites_frac() + shift_frac
xrs.set_sites_frac(sites_shifted)
f_calc_from_shifted_xrs = xrs.structure_factors(d_min=d_min).f_calc()
fft_map_from_shifted_xrs = f_calc_from_shifted_xrs.fft_map(
resolution_factor=resolution_factor, crystal_gridding=cg)
map_data_from_shifted_xrs = fft_map_from_shifted_xrs.real_map_unpadded()
# shifted_map_data (map from phase shifted f_calc),
# map_data_from_shifted_xrs (recalculated with shifted xrs)
assert shifted_map_data.all() == map_data_from_shifted_xrs.all()
from cctbx import maptbx
sel = maptbx.grid_indices_around_sites(unit_cell=xrs.unit_cell(),
fft_n_real=shifted_map_data.focus(),
fft_m_real=shifted_map_data.all(),
sites_cart=xrs.sites_cart(),
site_radii=flex.double(
xrs.scatterers().size(), 1.5))
shifted_map_data = shifted_map_data.select(sel)
map_data_from_shifted_xrs = map_data_from_shifted_xrs.select(sel)
cc_map_data_from_shifted_xrs_shifted_map_data = flex.linear_correlation(
x=map_data_from_shifted_xrs.as_1d(),
y=shifted_map_data.as_1d()).coefficient()
print "cc_map_data_from_shifted_xrs_shifted_map_data",\
cc_map_data_from_shifted_xrs_shifted_map_data
assert cc_map_data_from_shifted_xrs_shifted_map_data > 0.99
print "*" * 25
def run_call_back(flags, space_group_info):
d_min = 2.0
structure = random_structure.xray_structure(
space_group_info=space_group_info,
elements=["N", "C", "O", "S"]*3 + ["Fe"]*2,
volume_per_atom=100)
if (not space_group_info.group().is_centric()):
fp_fdp_targets = [(-1,2), (-2,6)]
else:
fp_fdp_targets = [(-1,0), (-2,0)]
anomalous_scatterer_groups = [
xray.anomalous_scatterer_group(
iselection=flex.size_t(),
f_prime=fp,
f_double_prime=fdp,
refine=["f_prime", "f_double_prime"]) for fp,fdp in fp_fdp_targets]
for i_seq,scatterer in enumerate(structure.scatterers()):
if (scatterer.scattering_type == "S"):
anomalous_scatterer_groups[0].iselection.append(i_seq)
if (scatterer.scattering_type == "Fe"):
anomalous_scatterer_groups[1].iselection.append(i_seq)
for group in anomalous_scatterer_groups:
group.copy_to_scatterers_in_place(scatterers=structure.scatterers())
if (flags.Verbose):
structure.show_summary().show_scatterers()
f_obs = abs(structure.structure_factors(
d_min=2.0, anomalous_flag=True).f_calc())
if (flags.Verbose):
f_obs.show_comprehensive_summary()
#
for group in anomalous_scatterer_groups:
group.f_prime = 0
group.f_double_prime = 0
group.copy_to_scatterers_in_place(scatterers=structure.scatterers())
sfg_params = mmtbx.f_model.sf_and_grads_accuracy_master_params.extract()
sfg_params.algorithm = "direct"
fmodel = mmtbx.f_model.manager(
xray_structure=structure,
f_obs=f_obs,
r_free_flags=f_obs.generate_r_free_flags(),
sf_and_grads_accuracy_params = sfg_params,
target_name="ls")
#
n_cycles = [0]
def call_back(minimizer):
n_cycles[0] += 1
return True
minimized = mmtbx.refinement.anomalous_scatterer_groups.minimizer(
fmodel=fmodel,
groups=anomalous_scatterer_groups,
call_back_after_minimizer_cycle=call_back,
number_of_finite_difference_tests=3)
assert n_cycles == [3]
#
for group,(fp,fdp) in zip(anomalous_scatterer_groups, fp_fdp_targets):
# Large eps because the minimization doesn't reliably converge.
# We don't want to exercise the minimizer here, the important
# test is the finite difference test embedded in the minimizer.
assert approx_equal(group.f_prime, fp, eps=1)
assert approx_equal(group.f_double_prime, fdp, eps=1)
def generate_random_f_calc(
space_group_info,
n_elements=10,
d_min=1.5,
verbose=0):
structure = random_structure.xray_structure(
space_group_info,
elements=["Si"]*n_elements,
volume_per_atom=1000,
min_distance=3.,
general_positions_only=False)
if (0 or verbose):
structure.show_summary()
structure.show_scatterers()
print
print "Writing tmp.pdb"
s = structure.as_pdb_file(
remark="random structure",
resname="RND")
open("tmp.pdb", "w").write(s)
if (0 or verbose):
print
f_calc = structure.structure_factors(
d_min=d_min, anomalous_flag=False).f_calc()
if (0 or verbose):
f_calc.show_summary()
print
print "Writing: tmp.phs"
f_calc.as_phases_phs(out=open("tmp.phs", "w"))
if (0 or verbose):
print
def test_grid_step(n_sites=50, volume_per_atom=50, d_min=2.0):
grid_step = (0.2, 0.4, 0.6, 0.7, 0.9, 1.0)
for step in grid_step:
symmetry = crystal.symmetry(space_group_symbol="P1")
structure = random_structure.xray_structure(
space_group_info=symmetry.space_group_info(),
elements=["C"] * n_sites,
volume_per_atom=volume_per_atom,
random_u_iso=False)
fc = structure.structure_factors(d_min=d_min,
anomalous_flag=False,
algorithm="fft").f_calc()
manager = max_like_non_uniform.ordered_solvent_distribution(
structure=structure, fo=fc, grid_step=step)
f_water_dist = manager.fcalc_from_distribution()
### check phase compatibility with the symmetry:
centrics = f_water_dist.select_centric()
if (centrics.indices().size() > 0):
ideal = centrics.phase_transfer(centrics)
assert flex.max(flex.abs(ideal.data() - centrics.data())) < 1.e-6
###
#print "max = ", flex.max( flex.abs( f_water_dist.data() ) )
#print "min = ", flex.min( flex.abs( f_water_dist.data() ) )
#print "ave = ", flex.mean( flex.abs( f_water_dist.data() ) )
assert flex.max(flex.abs(f_water_dist.data())) < 1.0
def skewness_calculation(space_group_info,
n_test_points=10,
n_sites=20,
d_min=3,
volume_per_atom=200):
structure = random_structure.xray_structure(
space_group_info=space_group_info,
elements=["Se"] * n_sites,
volume_per_atom=volume_per_atom,
random_u_iso=True)
structure.show_summary()
print()
f_calc = structure.structure_factors(d_min=d_min,
anomalous_flag=False).f_calc()
f_calc.show_summary()
print()
for i_fudge_factor in range(n_test_points + 1):
fudge_factor = i_fudge_factor / float(n_test_points)
randomized_f_calc = randomize_phases(f_calc, fudge_factor)
mwpe = f_calc.mean_weighted_phase_error(randomized_f_calc)
rho = randomized_f_calc.fft_map().real_map_unpadded()
# <(rho-rho_bar)**3>/<(rho-rho_bar)**2>**3/2
rho_rho_bar = rho - flex.mean(rho)
num = flex.mean(flex.pow(rho_rho_bar, 3))
den = flex.mean(flex.pow(rho_rho_bar, 2))**(3 / 2.)
assert den != 0
skewness = num / den
print("fudge factor, phase difference, map skewness:", end=' ')
print("%4.2f, %5.2f, %.4g" % (fudge_factor, mwpe, skewness))
print()
def get_xray_structure_random(space_group_info):
xray_structure = random_structure.xray_structure(
space_group_info=space_group_info,
elements=["N"] * 100,
volume_per_atom=50.0,
random_u_iso=True)
return xray_structure
def exercise_2():
xray_structure = random_structure.xray_structure(
space_group_info=sgtbx.space_group_info("C 1 2/c 1"),
elements=("O", "N", "C") * 50,
volume_per_atom=100,
min_distance=1.5,
general_positions_only=True,
random_u_iso=True,
random_occupancy=True)
xray_structure.scattering_type_registry(table="wk1995")
f_obs = abs(xray_structure.structure_factors(d_min=2.0).f_calc())
sfg_params = mmtbx.f_model.sf_and_grads_accuracy_master_params.extract()
for algorithm in ["fft", "direct"]:
flags = f_obs.generate_r_free_flags(fraction=0.1, max_free=99999999)
fmodel = mmtbx.f_model.manager(xray_structure=xray_structure,
f_obs=f_obs,
r_free_flags=flags,
sf_and_grads_accuracy_params=sfg_params)
f_calc_1 = abs(fmodel.f_calc()).data()
f_calc_2 = abs(
f_obs.structure_factors_from_scatterers(
xray_structure=xray_structure,
algorithm=sfg_params.algorithm).f_calc()).data()
delta = flex.abs(f_calc_1 - f_calc_2)
assert approx_equal(flex.sum(delta), 0.0)
def run():
xrs = random_structure.xray_structure(
space_group_info = sgtbx.space_group_info("P1"),
elements = ["N"]*500,
unit_cell = (20, 30, 40, 70, 80, 120))
xrs = xrs.set_b_iso(value=25)
d_mins = [1.5]
result = []
for d_min in d_mins:
f_obs = abs(xrs.structure_factors(d_min=d_min).f_calc())
f_obs = f_obs.customized_copy(data = f_obs.data() * 135.)
shifts = [0.0, 0.3]
for xyz_shake_amount in shifts:
xrs_shaken = xrs.deep_copy_scatterers()
xrs_shaken.shake_sites_in_place(mean_distance = xyz_shake_amount)
ml_err = flex.double()
ml_err_new = flex.double()
for trial in xrange(10):
r_free_flags = f_obs.generate_r_free_flags()
fmodel = mmtbx.f_model.manager(
f_obs = f_obs,
r_free_flags = r_free_flags,
xray_structure = xrs_shaken)
ml_err_ = fmodel.model_error_ml()
ml_err.append(ml_err_)
result.append(flex.mean(ml_err))
assert result[0] > 0 and result[0] < 0.03
assert result[1] > 0.2 and result[1] <= 0.32
def exercise_01 () :
"""
Sanity check - don't crash when mean intensity for a bin is zero.
"""
xrs = random_structure.xray_structure(
unit_cell=(50,50,50,90,90,90),
space_group_symbol="P1",
n_scatterers=1200,
elements="random")
fc = abs(xrs.structure_factors(d_min=1.5).f_calc())
fc = fc.set_observation_type_xray_amplitude()
cs = fc.complete_set(d_min=1.4)
ls = cs.lone_set(other=fc)
f_zero = ls.array(data=flex.double(ls.size(), 0))
f_zero.set_observation_type_xray_amplitude()
fc = fc.concatenate(other=f_zero)
sigf = flex.double(fc.size(), 0.1) + (fc.data() * 0.03)
fc = fc.customized_copy(sigmas=sigf)
try :
fc_fc = french_wilson.french_wilson_scale(miller_array=fc, log=null_out())
except Sorry :
pass
else :
raise Exception_expected
ic = fc.f_as_f_sq().set_observation_type_xray_intensity()
fc_fc = french_wilson.french_wilson_scale(miller_array=ic, log=null_out())
def exercise_centrics(space_group_info, n_sites=10):
structure = random_structure.xray_structure(
space_group_info=space_group_info,
elements=(("O", "N", "C") * (n_sites // 3 + 1))[:n_sites],
volume_per_atom=30,
min_distance=1)
for anomalous_flag in [False, True]:
miller_set = miller.build_set(crystal_symmetry=structure,
d_min=1,
anomalous_flag=anomalous_flag)
for shrink_truncation_radius in [0, .5 * 6**.5]:
for solvent_radius in [0, .5 * 5**.5]:
bulk_solvent_mask = mmtbx.masks.bulk_solvent(
xray_structure=structure,
grid_step=0.5,
ignore_zero_occupancy_atoms=False,
solvent_radius=solvent_radius,
shrink_truncation_radius=shrink_truncation_radius)
f_mask = bulk_solvent_mask.structure_factors(
miller_set=miller_set)
centrics = f_mask.select_centric()
if (centrics.indices().size() > 0):
ideal = centrics.phase_transfer(centrics)
assert flex.max(
flex.abs(ideal.data() - centrics.data())) < 1.e-6
def generate_random_f_calc(space_group_info,
n_elements=10,
d_min=1.5,
verbose=0):
structure = random_structure.xray_structure(space_group_info,
elements=["Si"] * n_elements,
volume_per_atom=1000,
min_distance=3.,
general_positions_only=False)
if (0 or verbose):
structure.show_summary()
structure.show_scatterers()
print
print "Writing tmp.pdb"
s = structure.as_pdb_file(remark="random structure", resname="RND")
open("tmp.pdb", "w").write(s)
if (0 or verbose):
print
f_calc = structure.structure_factors(d_min=d_min,
anomalous_flag=False).f_calc()
if (0 or verbose):
f_calc.show_summary()
print
print "Writing: tmp.phs"
f_calc.as_phases_phs(out=open("tmp.phs", "w"))
if (0 or verbose):
print
def run():
xrs = random_structure.xray_structure(
space_group_info=sgtbx.space_group_info("P1"),
elements=["N"] * 500,
unit_cell=(20, 30, 40, 70, 80, 120))
xrs = xrs.set_b_iso(value=25)
d_mins = [1.5]
result = []
for d_min in d_mins:
f_obs = abs(xrs.structure_factors(d_min=d_min).f_calc())
f_obs = f_obs.customized_copy(data=f_obs.data() * 135.)
shifts = [0.0, 0.3]
for xyz_shake_amount in shifts:
xrs_shaken = xrs.deep_copy_scatterers()
xrs_shaken.shake_sites_in_place(mean_distance=xyz_shake_amount)
ml_err = flex.double()
ml_err_new = flex.double()
for trial in range(10):
r_free_flags = f_obs.generate_r_free_flags()
fmodel = mmtbx.f_model.manager(f_obs=f_obs,
r_free_flags=r_free_flags,
xray_structure=xrs_shaken)
ml_err_ = fmodel.model_error_ml()
ml_err.append(ml_err_)
result.append(flex.mean(ml_err))
assert result[0] > 0 and result[0] < 0.03
assert result[1] > 0.2 and result[1] <= 0.32
def exercise_3():
from mmtbx import masks
from cctbx import sgtbx
xs = random_structure.xray_structure(
space_group_info=sgtbx.space_group_info("P1"),
elements=["C"] * 2,
unit_cell=(10, 20, 30, 70, 80, 120))
f_calc = xs.structure_factors(d_min=2.0).f_calc()
mp = masks.mask_master_params.extract()
mm1 = masks.manager(miller_array=f_calc, xray_structure=xs)
assert list(xs.scatterers().extract_occupancies()) == [1.0, 1.0]
fmasks1 = mm1.shell_f_masks()
assert len(fmasks1) == 1
assert flex.mean(flex.abs(fmasks1[0].data())) > 4.0
#
xs.set_occupancies(value=0)
mp.ignore_zero_occupancy_atoms = False
mp.use_asu_masks = False
mm2 = masks.manager(miller_array=f_calc, xray_structure=xs, mask_params=mp)
assert list(xs.scatterers().extract_occupancies()) == [0.0, 0.0]
fmasks1 = mm1.shell_f_masks()
assert len(fmasks1) == 1
fmasks2 = mm2.shell_f_masks()
assert len(fmasks2) == 1
assert flex.mean( flex.abs(fmasks1[0].data()) ) == \
flex.mean( flex.abs(fmasks2[0].data()) )
#
mp.ignore_zero_occupancy_atoms = True
mp.use_asu_masks = False
mm3 = masks.manager(miller_array=f_calc, xray_structure=xs, mask_params=mp)
assert list(xs.scatterers().extract_occupancies()) == [0.0, 0.0]
fmasks3 = mm3.shell_f_masks()
assert len(fmasks3) == 1
assert approx_equal(
flex.abs(fmasks3[0].data()).min_max_mean().as_tuple(), (0.0, 0.0, 0.0))
def exercise_ellipsoidal_truncation(space_group_info, n_sites=100, d_min=1.5):
xrs = random_structure.xray_structure(
space_group_info=space_group_info,
elements=(("O", "N", "C") * (n_sites // 3 + 1))[:n_sites],
volume_per_atom=50,
min_distance=1.5,
)
f_obs = abs(xrs.structure_factors(d_min=d_min).f_calc())
# exercise reciprocal_space_vector()
for mi, d in zip(f_obs.indices(), f_obs.d_spacings().data()):
rsv = flex.double(f_obs.unit_cell().reciprocal_space_vector(mi))
assert approx_equal(d, 1.0 / math.sqrt(rsv.dot(rsv)))
##
print f_obs.unit_cell()
f = flex.random_double(f_obs.data().size()) * flex.mean(f_obs.data()) / 10
#
f_obs1 = f_obs.customized_copy(data=f_obs.data(), sigmas=f_obs.data() * f)
print "datat in:", f_obs1.data().size()
r = f_obs1.ellipsoidal_truncation_by_sigma(sigma_cutoff=1)
print "data left:", r.data().size()
r.miller_indices_as_pdb_file(file_name="indices1.pdb", expand_to_p1=False)
r.miller_indices_as_pdb_file(file_name="indices2.pdb", expand_to_p1=True)
#
f_obs.miller_indices_as_pdb_file(file_name="indices3.pdb", expand_to_p1=False)
f_obs.miller_indices_as_pdb_file(file_name="indices4.pdb", expand_to_p1=True)
print "*" * 25
def get_random_structure_and_map(
use_static_structure=False,
random_seed=171413,
):
if use_static_structure:
mmm = map_model_manager()
mmm.generate_map()
return group_args(model=mmm.model(), mm=mmm.map_manager())
import random
random.seed(random_seed)
i = random.randint(1, 714717)
flex.set_random_seed(i)
xrs = random_structure.xray_structure(
space_group_info=space_group_info(19),
volume_per_atom=25.,
elements=('C', 'N', 'O', 'H') * 10,
min_distance=1.5)
fc = xrs.structure_factors(d_min=2).f_calc()
fft_map = fc.fft_map(resolution_factor=0.25)
fft_map.apply_volume_scaling()
ph = iotbx.pdb.input(source_info=None,
lines=xrs.as_pdb_file()).construct_hierarchy()
ph.atoms().set_xyz(xrs.sites_cart())
map_data = fft_map.real_map_unpadded()
mm = map_manager(unit_cell_grid=map_data.accessor().all(),
unit_cell_crystal_symmetry=fc.crystal_symmetry(),
origin_shift_grid_units=(0, 0, 0),
map_data=map_data)
model = mmtbx.model.manager(model_input=None,
pdb_hierarchy=ph,
crystal_symmetry=fc.crystal_symmetry())
return group_args(model=model, mm=mm)
def exercise_f_model_no_scales(symbol = "C 2"):
random.seed(0)
flex.set_random_seed(0)
x = random_structure.xray_structure(
space_group_info = sgtbx.space_group_info(symbol=symbol),
elements =(("O","N","C")*5+("H",)*10),
volume_per_atom = 200,
min_distance = 1.5,
general_positions_only = True,
random_u_iso = True,
random_occupancy = False)
f_obs = abs(x.structure_factors(d_min = 1.5, algorithm="fft").f_calc())
x.shake_sites_in_place(mean_distance=1)
k_iso = flex.double(f_obs.data().size(), 2)
k_aniso = flex.double(f_obs.data().size(), 3)
fmodel = mmtbx.f_model.manager(
xray_structure = x,
k_isotropic = k_iso,
k_anisotropic = k_aniso,
f_obs = f_obs)
fc = abs(fmodel.f_calc()).data()
fm = abs(fmodel.f_model()).data()
fmns = abs(fmodel.f_model_no_scales()).data()
assert approx_equal(flex.mean(fm/fc), 6)
assert approx_equal(flex.mean(fmns/fc), 1)
def exercise_xray_structure(use_u_aniso, verbose=0):
structure = random_structure.xray_structure(
space_group_info=sgtbx.space_group_info("P 31"),
elements=["N","C","C","O","Si"]*2,
volume_per_atom=500,
min_distance=2.,
general_positions_only=False,
random_u_iso=True,
use_u_aniso=use_u_aniso)
f_abs = abs(structure.structure_factors(
anomalous_flag=False, d_min=2, algorithm="direct").f_calc())
for resname in (None, "res"):
for fractional_coordinates in (False, True):
pdb_file = structure.as_pdb_file(
remark="Title", remarks=["Any", "Thing"],
fractional_coordinates=fractional_coordinates,
resname=resname)
if (0 or verbose):
sys.stdout.write(pdb_file)
structure_read = iotbx.pdb.input(
source_info=None,
lines=flex.std_string(pdb_file.splitlines())).xray_structure_simple(
fractional_coordinates=fractional_coordinates,
use_scale_matrix_if_available=False)
f_read = abs(f_abs.structure_factors_from_scatterers(
xray_structure=structure_read, algorithm="direct").f_calc())
regression = flex.linear_regression(f_abs.data(), f_read.data())
assert regression.is_well_defined()
if (0 or verbose):
regression.show_summary()
assert approx_equal(regression.slope(), 1, eps=1.e-2)
assert approx_equal(
regression.y_intercept(), 0, eps=flex.max(f_abs.data())*0.01)
def exercise_twin_detwin():
random.seed(12345)
flex.set_random_seed(12345)
xrs = random_structure.xray_structure(
unit_cell=(12,5,12,90,90,90),
space_group_symbol="P1",
n_scatterers=12,
elements="random")
fc = abs(xrs.structure_factors(d_min=1.5).f_calc())
fc = fc.set_observation_type_xray_amplitude()
mtz_file = "tmp_massage_in.mtz"
fc.as_mtz_dataset(column_root_label="F").mtz_object().write(mtz_file)
massage_data.run(
args=[
mtz_file,
"aniso.action=None",
"outlier.action=None",
"symmetry.action=twin",
"twin_law='l,-k,h'",
"fraction=0.3",
"hklout=tmp_massage_twinned.mtz",
],
out=null_out())
assert op.isfile("tmp_massage_twinned.mtz")
mtz_in = file_reader.any_file("tmp_massage_twinned.mtz")
fc_twin = mtz_in.file_server.miller_arrays[0].f_sq_as_f()
fc_twin, fc_tmp = fc_twin.common_sets(other=fc)
for hkl, f1, f2 in zip(fc_tmp.indices(), fc_tmp.data(), fc_twin.data()):
if (abs(hkl[0]) != abs(hkl[2])):
assert not approx_equal(f1, f2, eps=0.01, out=null_out()), (hkl, f1, f2)
massage_data.run(
args=[
mtz_file,
"aniso.action=None",
"outlier.action=None",
"symmetry.action=twin",
"twin_law='l,-k,h'",
"fraction=0.3",
"hklout=tmp_massage_twinned.sca",
],
out=null_out())
assert op.isfile("tmp_massage_twinned.sca")
massage_data.run(
args=[
"tmp_massage_twinned.mtz",
"aniso.action=None",
"outlier.action=None",
"symmetry.action=detwin",
"twin_law='l,-k,h'",
"fraction=0.3",
"hklout=tmp_massage_detwinned.mtz",
],
out=null_out())
mtz_in = file_reader.any_file("tmp_massage_detwinned.mtz")
fc_detwin = mtz_in.file_server.miller_arrays[0].f_sq_as_f()
fc_detwin, fc_tmp = fc_detwin.common_sets(other=fc)
# XXX we appear to lose some accuracy here, possibly due to the use of
# MTZ format
for hkl, f1, f2 in zip(fc_tmp.indices(), fc_tmp.data(), fc_detwin.data()):
assert approx_equal(f1, f2, eps=0.01), hkl
def exercise(flags, space_group_info):
# Prepare a structure compatible with the ShelX model
xs = random_structure.xray_structure(space_group_info,
elements="random",
n_scatterers=10,
use_u_iso=True,
random_u_iso=True,
use_u_aniso=True)
xs.apply_symmetry_sites()
xs.apply_symmetry_u_stars()
for isotropic, sc in itertools.izip(variate(bernoulli_distribution(0.4)),
xs.scatterers()):
sc.flags.set_grad_site(True)
if isotropic:
sc.flags.set_use_u_iso(True)
sc.flags.set_use_u_aniso(False)
sc.flags.set_grad_u_iso(True)
else:
sc.flags.set_use_u_iso(False)
sc.flags.set_use_u_aniso(True)
sc.flags.set_grad_u_aniso(True)
not_origin_centric = (xs.space_group().is_centric()
and not xs.space_group().is_origin_centric())
try:
ins = list(
shelx.writer.generator(xs,
full_matrix_least_squares_cycles=4,
weighting_scheme_params=(0, 0),
sort_scatterers=False))
except AssertionError:
if (not_origin_centric):
print(
"Omitted %s\n because it is centric but not origin centric" %
xs.space_group().type().hall_symbol())
return
raise
else:
if (not_origin_centric):
raise Exception_expected
ins = cStringIO.StringIO("".join(ins))
xs1 = xs.from_shelx(file=ins)
xs.crystal_symmetry().is_similar_symmetry(xs1.crystal_symmetry(),
relative_length_tolerance=1e-3,
absolute_angle_tolerance=1e-3)
uc = xs.unit_cell()
uc1 = xs1.unit_cell()
for sc, sc1 in itertools.izip(xs.scatterers(), xs1.scatterers()):
assert sc.label.upper() == sc1.label.upper()
assert sc.scattering_type == sc1.scattering_type
assert sc.flags.bits == sc1.flags.bits
assert approx_equal(sc.site, sc1.site, eps=1e-6)
if sc.flags.use_u_iso():
assert approx_equal(sc.u_iso, sc1.u_iso, eps=1e-5)
else:
assert approx_equal(adptbx.u_star_as_u_cif(uc, sc.u_star),
adptbx.u_star_as_u_cif(uc1, sc1.u_star),
eps=1e-5)
def randomly_exercise(
flipping_type,
space_group_info,
elements,
anomalous_flag,
d_min,
grid_resolution_factor=1.0 / 2,
verbose=False,
amplitude_type="F",
):
# Generate a random structure in real space, that we will try to recover
target_structure = random_structure.xray_structure(
space_group_info=space_group_info,
elements=elements,
use_u_iso=True,
random_u_iso=True,
random_u_iso_scale=0.04,
use_u_aniso=False,
)
exercise_one_structure(
target_structure,
flipping_type,
anomalous_flag,
d_min,
grid_resolution_factor=grid_resolution_factor,
verbose=verbose,
amplitude_type=amplitude_type,
)
def __init__(self, model_id="SBT", n_elements=4):
if (model_id is None): return
self.model_id = model_id
pos = emma.position
if (type(model_id) == type("")):
if (model_id == "SBT"):
emma.model.__init__(
self,
crystal.special_position_settings(
crystal.symmetry((16.8986, 16.8986, 16.8986, 61.1483,
61.1483, 61.1483), "R -3 m :R")),
(pos("SI1", (-0.3584, 0.2844, 0.4622)),
pos("SI2", (-0.2133, 0.9659, -0.6653)),
pos("SI3", (-0.8358, 0.7, 0.3431)),
pos("SI4", (0.4799, 1.836, 0.6598))))
else:
raise RuntimeError("Unknown model_id: " + model_id)
else:
structure = random_structure.xray_structure(model_id,
elements=["S"] *
n_elements,
volume_per_atom=50.,
min_distance=2.0)
positions = []
for scatterer in structure.scatterers():
positions.append(emma.position(scatterer.label,
scatterer.site))
emma.model.__init__(self, structure, positions)
def exercise_01(grid_step = 0.03, d_min = 1.0, wing_cutoff = 1.e-9):
xrs = random_structure.xray_structure(
space_group_info = sgtbx.space_group_info("P 1"),
elements = ["O","N","C","P","S","U","AU"]*1,
random_u_iso = True,
general_positions_only = False)
# avoid excessive_range_error_limit crash
bs = xrs.extract_u_iso_or_u_equiv()*adptbx.u_as_b(1)
sel = bs < 1
bs = bs.set_selected(sel, 1)
xrs.set_b_iso(values = bs)
#
p = xrs.unit_cell().parameters()
timer = user_plus_sys_time()
res = manager(nx = int(p[0]/grid_step),
ny = int(p[1]/grid_step),
nz = int(p[2]/grid_step),
scattering_type_registry = xrs.scattering_type_registry(),
unit_cell = xrs.unit_cell(),
scatterers = xrs.scatterers(),
wing_cutoff = wing_cutoff)
print "time: %10.4f" % (timer.elapsed())
f_calc_dir = xrs.structure_factors(
d_min = d_min,
algorithm = "direct").f_calc()
#
f_calc_den = f_calc_dir.structure_factors_from_map(map = res.density_array,
use_scale = True)
f1 = flex.abs(f_calc_dir.data())
f2 = flex.abs(f_calc_den.data())
r = flex.sum(flex.abs(f1-f2))/flex.sum(f2)
print "r-factor:", r
assert r < 1.e-4, r
def random_structure(self, crystal):
"""We're going to do some very approximate stuff here. Given a unit
cell & SG, will put typical atomic contents in the unit cell & get
structure factors.
"""
import random
random.seed(0)
from scitbx.array_family import flex
flex.set_random_seed(0)
from cctbx.development import random_structure
uc_volume = crystal.get_unit_cell().volume()
asu_volume = uc_volume / crystal.get_space_group().order_z()
target_number_scatterers = int(
asu_volume
) // 128 # Very approximate rule of thumb for proteins with ~50% solvent content
element_unit = ['O'] * 19 + ['N'] * 18 + ['C'] * 62 + ['S'] * 1 + [
'Fe'
] * 1
element_pallet = element_unit * (
1 + (target_number_scatterers // len(element_unit)))
assert len(element_pallet) >= target_number_scatterers
# Ersatz hard limit to prevent excessive execution time of xray_structure() below.
elements = element_pallet[:min(1000, target_number_scatterers)]
xs = random_structure.xray_structure(
space_group_info=crystal.get_space_group().info(),
unit_cell=crystal.get_unit_cell(),
elements=elements,
min_distance=1.2)
self.xs = xs
def exercise_sdb(verbose=0):
structure = random_structure.xray_structure(
space_group_info=sgtbx.space_group_info("P 31"),
elements=["N", "C", "C", "O"] * 2,
volume_per_atom=500,
min_distance=2.,
general_positions_only=False,
random_u_iso=True)
f_abs = abs(
structure.structure_factors(anomalous_flag=False,
d_min=2,
algorithm="direct").f_calc())
sdb_out = structure.as_cns_sdb_file(file="foo.sdb",
description="random_structure",
comment=["any", "thing"],
group="best")
if (0 or verbose):
sys.stdout.write(sdb_out)
sdb_files = sdb_reader.multi_sdb_parser(StringIO(sdb_out))
assert len(sdb_files) == 1
structure_read = sdb_files[0].as_xray_structure(
crystal_symmetry=crystal.symmetry(unit_cell=structure.unit_cell(),
space_group_info=None))
f_read = abs(
f_abs.structure_factors_from_scatterers(xray_structure=structure_read,
algorithm="direct").f_calc())
regression = flex.linear_regression(f_abs.data(), f_read.data())
assert regression.is_well_defined()
if (0 or verbose):
regression.show_summary()
assert abs(regression.slope() - 1) < 1.e-4
assert abs(regression.y_intercept()) < 1.e-3
def exercise_ellipsoidal_truncation(space_group_info, n_sites=100, d_min=1.5):
xrs = random_structure.xray_structure(
space_group_info=space_group_info,
elements=(("O", "N", "C") * (n_sites // 3 + 1))[:n_sites],
volume_per_atom=50,
min_distance=1.5)
f_obs = abs(xrs.structure_factors(d_min=d_min).f_calc())
# exercise reciprocal_space_vector()
for mi, d in zip(f_obs.indices(), f_obs.d_spacings().data()):
rsv = flex.double(f_obs.unit_cell().reciprocal_space_vector(mi))
assert approx_equal(d, 1. / math.sqrt(rsv.dot(rsv)))
##
print f_obs.unit_cell()
f = flex.random_double(f_obs.data().size()) * flex.mean(f_obs.data()) / 10
#
f_obs1 = f_obs.customized_copy(data=f_obs.data(), sigmas=f_obs.data() * f)
print "datat in:", f_obs1.data().size()
r = f_obs1.ellipsoidal_truncation_by_sigma(sigma_cutoff=1)
print "data left:", r.data().size()
r.miller_indices_as_pdb_file(file_name="indices1.pdb", expand_to_p1=False)
r.miller_indices_as_pdb_file(file_name="indices2.pdb", expand_to_p1=True)
#
f_obs.miller_indices_as_pdb_file(file_name="indices3.pdb",
expand_to_p1=False)
f_obs.miller_indices_as_pdb_file(file_name="indices4.pdb",
expand_to_p1=True)
print "*" * 25
def __init__(self, model_id="SBT", n_elements=4):
if (model_id is None): return
self.model_id = model_id
pos = emma.position
if (type(model_id) == type("")):
if (model_id == "SBT"):
emma.model.__init__(self,
crystal.special_position_settings(crystal.symmetry(
(16.8986, 16.8986, 16.8986, 61.1483, 61.1483, 61.1483),
"R -3 m :R")),
(pos("SI1", (-0.3584, 0.2844, 0.4622)),
pos("SI2", (-0.2133, 0.9659, -0.6653)),
pos("SI3", (-0.8358, 0.7, 0.3431)),
pos("SI4", (0.4799, 1.836, 0.6598))))
else:
raise RuntimeError, "Unknown model_id: " + model_id
else:
structure = random_structure.xray_structure(
model_id,
elements=["S"]*n_elements,
volume_per_atom=50.,
min_distance=2.0)
positions = []
for scatterer in structure.scatterers():
positions.append(emma.position(scatterer.label, scatterer.site))
emma.model.__init__(self, structure, positions)
def exercise_writer(space_group_info, n_sites=100, d_min=1.5):
if op.isfile("tst_iotbx_dsn6.omap"):
os.remove("tst_iotbx_dsn6.omap")
xrs = random_structure.xray_structure(
space_group_info=space_group_info,
elements=(("O", "N", "C") * (n_sites // 3 + 1))[:n_sites],
volume_per_atom=50,
min_distance=1.5)
fc = xrs.structure_factors(d_min=d_min).f_calc()
fft_map = fc.fft_map(resolution_factor=1 / 3).apply_sigma_scaling()
n_real = fft_map.n_real()
n_blocks = iceil(n_real[0] / 8) * iceil(n_real[1] / 8) * iceil(
n_real[2] / 8)
fft_map.as_dsn6_map(file_name="tst_iotbx_dsn6.omap")
assert op.isfile("tst_iotbx_dsn6.omap")
size = op.getsize("tst_iotbx_dsn6.omap")
assert (size == (n_blocks + 1) * 512)
os.remove("tst_iotbx_dsn6.omap")
fft_map.as_dsn6_map(file_name="tst_iotbx_dsn6.omap",
gridding_first=[-5, -5, -5],
gridding_last=n_real)
n_blocks = iceil(1 + n_real[0] / 8) * iceil(1 + n_real[1] /
8) * iceil(1 + n_real[2] / 8)
size = op.getsize("tst_iotbx_dsn6.omap")
assert (size == (n_blocks + 1) * 512)
def exercise(space_group_info, anomalous_flag,
n_scatterers=8, d_min=2, verbose=0):
structure = random_structure.xray_structure(
space_group_info,
elements=["const"]*n_scatterers)
f_calc = structure.structure_factors(
d_min=d_min, anomalous_flag=anomalous_flag).f_calc()
f = abs(f_calc)
f = miller.array(miller_set=f, data=f.data(), sigmas=flex.sqrt(f.data()))
f = f.f_as_f_sq()
g = f.expand_to_p1()
merger_p1 = xray.merger( g.indices(),
g.data(),
g.sigmas(),
g.space_group(),
g.anomalous_flag(),
g.unit_cell() )
p1_bic = merger_p1.bic()
p1_r = merger_p1.r_abs()
merger_nat = xray.merger( g.indices(),
g.data(),
g.sigmas(),
f.space_group(),
g.anomalous_flag(),
g.unit_cell() )
nat_bic = merger_nat.bic()
nat_r = merger_nat.r_abs()
assert nat_bic >= p1_bic
assert p1_r <= 1e-8
def test_less_one(space_group_info, volume_per_atom=100, d_min=1.8):
#symmetry = crystal.symmetry(space_group_symbol="p212121")
#space_group_info = symmetry.space_group_info()
#n_sym = space_group_info.type().group().n_smx()
for n_atoms in (1, 10):
if (n_atoms == 1):
denom = 16.0
else:
denom = 4.0
for element in ("C", "O", "N"):
structure = random_structure.xray_structure(
space_group_info=space_group_info,
elements=[element] * n_atoms,
volume_per_atom=volume_per_atom,
random_u_iso=False)
fc = structure.structure_factors(d_min=d_min,
anomalous_flag=False,
algorithm="fft").f_calc()
manager = max_like_non_uniform.ordered_solvent_distribution(
structure=structure, fo=fc, grid_step=fc.d_min() / denom)
f_water_dist = manager.fcalc_from_distribution()
### check phase compatibility with the symmetry:
centrics = f_water_dist.select_centric()
if (centrics.indices().size() > 0):
ideal = centrics.phase_transfer(centrics)
assert flex.max(
flex.abs(ideal.data() - centrics.data())) < 1.e-6
###
#print "max = ", flex.max( flex.abs( f_water_dist.data() ) )
#print "min = ", flex.min( flex.abs( f_water_dist.data() ) )
#print "ave = ", flex.mean( flex.abs( f_water_dist.data() ) )
assert flex.max(flex.abs(f_water_dist.data())) < 1.0
def skewness_calculation(space_group_info, n_test_points=10,
n_sites=20, d_min=3, volume_per_atom=200):
structure = random_structure.xray_structure(
space_group_info=space_group_info,
elements=["Se"]*n_sites,
volume_per_atom=volume_per_atom,
random_u_iso=True)
structure.show_summary()
print
f_calc = structure.structure_factors(
d_min=d_min, anomalous_flag=False).f_calc()
f_calc.show_summary()
print
for i_fudge_factor in xrange(n_test_points+1):
fudge_factor = i_fudge_factor/float(n_test_points)
randomized_f_calc = randomize_phases(f_calc, fudge_factor)
mwpe = f_calc.mean_weighted_phase_error(randomized_f_calc)
rho = randomized_f_calc.fft_map().real_map_unpadded()
# <(rho-rho_bar)**3>/<(rho-rho_bar)**2>**3/2
rho_rho_bar = rho - flex.mean(rho)
num = flex.mean(flex.pow(rho_rho_bar, 3))
den = flex.mean(flex.pow(rho_rho_bar, 2))**(3/2.)
assert den != 0
skewness = num / den
print "fudge factor, phase difference, map skewness:",
print "%4.2f, %5.2f, %.4g" % (fudge_factor, mwpe, skewness)
print
def exercise_f_model_no_scales(symbol = "C 2"):
random.seed(0)
flex.set_random_seed(0)
x = random_structure.xray_structure(
space_group_info = sgtbx.space_group_info(symbol=symbol),
elements =(("O","N","C")*5+("H",)*10),
volume_per_atom = 200,
min_distance = 1.5,
general_positions_only = True,
random_u_iso = True,
random_occupancy = False)
f_obs = abs(x.structure_factors(d_min = 1.5, algorithm="fft").f_calc())
x.shake_sites_in_place(mean_distance=1)
k_iso = flex.double(f_obs.data().size(), 2)
k_aniso = flex.double(f_obs.data().size(), 3)
fmodel = mmtbx.f_model.manager(
xray_structure = x,
k_isotropic = k_iso,
k_anisotropic = k_aniso,
f_obs = f_obs)
fc = abs(fmodel.f_calc()).data()
fm = abs(fmodel.f_model()).data()
fmns = abs(fmodel.f_model_no_scales()).data()
assert approx_equal(flex.mean(fm/fc), 6)
assert approx_equal(flex.mean(fmns/fc), 1)
def exercise_01():
"""
Sanity check - don't crash when mean intensity for a bin is zero.
"""
xrs = random_structure.xray_structure(unit_cell=(50, 50, 50, 90, 90, 90),
space_group_symbol="P1",
n_scatterers=1200,
elements="random")
fc = abs(xrs.structure_factors(d_min=1.5).f_calc())
fc = fc.set_observation_type_xray_amplitude()
cs = fc.complete_set(d_min=1.4)
ls = cs.lone_set(other=fc)
f_zero = ls.array(data=flex.double(ls.size(), 0))
f_zero.set_observation_type_xray_amplitude()
fc = fc.concatenate(other=f_zero)
sigf = flex.double(fc.size(), 0.1) + (fc.data() * 0.03)
fc = fc.customized_copy(sigmas=sigf)
try:
fc_fc = french_wilson.french_wilson_scale(miller_array=fc,
log=null_out())
except Sorry:
pass
else:
raise Exception_expected
ic = fc.f_as_f_sq().set_observation_type_xray_intensity()
fc_fc = french_wilson.french_wilson_scale(miller_array=ic, log=null_out())
def exercise(flags, space_group_info, n_sampled):
symbol = space_group_info.type().hall_symbol()
print symbol,
if flags.fix_seed:
random.seed(0)
if not flags.include_high_symmetry:
if space_group_info.group().order_p() > 8:
if len(symbol) > 15: print
print " [ Omitted, rerun with --include_high_symmetry to override ]"
return
print
n = int(flags.repeats)
if n == 0: n = 1
progress = progress_displayed_as_fraction(n)
for i in xrange(n):
xs = random_structure.xray_structure(
space_group_info=space_group_info,
elements=['C']*5 + ['O']*2 + ['N'],
use_u_iso=True,
random_u_iso=True,
random_u_iso_scale=0.04,
use_u_aniso=False)
f_c = miller.build_set(
xs, anomalous_flag=False, d_min=0.8
).structure_factors_from_scatterers(
xs, algorithm='direct').f_calc()
f_o = f_c.as_amplitude_array()
f_c_in_p1 = f_c.expand_to_p1()
exercise_value(f_c_in_p1, f_o, flags, n_sampled)
exercise_gradient(f_c_in_p1, f_o, flags, n_sampled)
progress.advance()
progress.done()
def run():
structure = random_structure.xray_structure(
sgtbx.space_group_info("P21/c"),
elements=["Si"]*10,
volume_per_atom=18.6,
min_distance=1.2,
general_positions_only=False)
miller_set_f_obs = miller.build_set(
crystal_symmetry=structure,
anomalous_flag=True,
d_min=0.8)
f_obs = miller_set_f_obs.structure_factors_from_scatterers(
xray_structure=structure,
algorithm="direct").f_calc()
fft_map = f_obs.fft_map(symmetry_flags=maptbx.use_space_group_symmetry)
padded = fft_map.real_map()
unpadded = fft_map.real_map_unpadded() # copy
unpadded_1d = unpadded.as_1d() # 1D view => in-place
mmm = flex.min_max_mean_double(unpadded_1d)
for delta in ((mmm.min + mmm.mean)/2, mmm.mean, (mmm.mean + mmm.max)/2):
# in-place charge flipping
ab_initio.ext.flip_charges_in_place(padded, delta)
# same but on an unpadded copy using the flex tools
flipped_selection = unpadded_1d < delta
flipped = unpadded_1d.select(flipped_selection)
flipped *= -1
unpadded_1d.set_selected(flipped_selection, flipped)
assert approx_equal(padded, unpadded, 1e-15)
print format_cpu_times()
def random_f_calc(space_group_info,
n_scatterers,
d_min,
anomalous_flag,
verbose=0):
if (anomalous_flag and space_group_info.group().is_centric()):
return None
structure = random_structure.xray_structure(space_group_info,
elements=["const"] *
n_scatterers,
volume_per_atom=500,
min_distance=2.,
general_positions_only=True)
if (0 or verbose):
structure.show_summary().show_scatterers()
f_calc = structure.structure_factors(
d_min=d_min, anomalous_flag=anomalous_flag).f_calc()
f_calc = miller.array(miller_set=f_calc,
data=f_calc.data() /
flex.mean(flex.abs(f_calc.data())))
if (f_calc.anomalous_flag()):
selection = flex.bool(f_calc.indices().size(), True)
for i in xrange(f_calc.indices().size() // 10):
j = random.randrange(f_calc.indices().size())
selection[j] = False
f_calc = f_calc.select(selection)
return f_calc
def exercise_subtract_continuous_allowed_origin_shifts(space_group_info,
use_niggli_cell,
n_elements=3):
structure = random_structure.xray_structure(space_group_info,
elements=["Si"] * n_elements,
volume_per_atom=300,
min_distance=3.,
general_positions_only=False)
if (use_niggli_cell):
structure = structure.niggli_cell()
f_obs = abs(
structure.structure_factors(d_min=3, algorithm="direct").f_calc())
assert f_obs.indices().size() >= 10
transl = matrix.col(flex.random_double_point_on_sphere()) * 2.345
transl_no_cont = matrix.col(
structure.subtract_continuous_allowed_origin_shifts(
translation_cart=transl))
transl_cont = transl - transl_no_cont
structure_transl = structure.apply_shift(
shift=structure.unit_cell().fractionalize(transl_cont),
recompute_site_symmetries=True)
f_transl = abs(
f_obs.structure_factors_from_scatterers(
xray_structure=structure_transl, algorithm="direct").f_calc())
assert approx_equal(f_transl.data(), f_obs.data())
def exercise(flags, space_group_info, n_sampled):
symbol = space_group_info.type().hall_symbol()
print symbol,
if flags.fix_seed:
random.seed(0)
if not flags.include_high_symmetry:
if space_group_info.group().order_p() > 8:
if len(symbol) > 15: print
print " [ Omitted, rerun with --include_high_symmetry to override ]"
return
print
n = int(flags.repeats)
if n == 0: n = 1
progress = progress_displayed_as_fraction(n)
for i in xrange(n):
xs = random_structure.xray_structure(space_group_info=space_group_info,
elements=['C'] * 5 + ['O'] * 2 +
['N'],
use_u_iso=True,
random_u_iso=True,
random_u_iso_scale=0.04,
use_u_aniso=False)
f_c = miller.build_set(xs, anomalous_flag=False,
d_min=0.8).structure_factors_from_scatterers(
xs, algorithm='direct').f_calc()
f_o = f_c.as_amplitude_array()
f_c_in_p1 = f_c.expand_to_p1()
exercise_value(f_c_in_p1, f_o, flags, n_sampled)
exercise_gradient(f_c_in_p1, f_o, flags, n_sampled)
progress.advance()
progress.done()
def exercise(space_group_info, anomalous_flag=False, d_min=2., verbose=0):
sg_fcalc = random_structure.xray_structure(
space_group_info,
elements=("N", "C", "C", "O"),
random_f_double_prime=anomalous_flag,
random_u_iso=True,
random_occupancy=True
).structure_factors(
anomalous_flag=anomalous_flag, d_min=d_min, algorithm="direct").f_calc()
sg_hl = generate_random_hl(sg_fcalc)
write_cns_input(sg_fcalc, sg_hl.data())
try: os.unlink("tmp_sg.hkl")
except OSError: pass
try: os.unlink("tmp_p1.hkl")
except OSError: pass
easy_run.fully_buffered(command="cns < tmp.cns > tmp.out") \
.raise_if_errors_or_output()
sg_cns = read_reflection_arrays("tmp_sg.hkl", anomalous_flag, verbose)
p1_cns = read_reflection_arrays("tmp_p1.hkl", anomalous_flag, verbose)
verify(sg_fcalc, sg_hl.data(), sg_cns, p1_cns)
if (anomalous_flag):
hl_merged = sg_hl.average_bijvoet_mates()
fc_merged = sg_fcalc.average_bijvoet_mates()
write_cns_input(sg_fcalc, sg_hl.data(), test_merge=True)
try: os.unlink("tmp_merged.hkl")
except OSError: pass
easy_run.fully_buffered(command="cns < tmp.cns > tmp.out") \
.raise_if_errors_or_output()
reflection_file = reflection_reader.cns_reflection_file(
open("tmp_merged.hkl"))
if (not sg_fcalc.space_group().is_centric()):
fc_merged_cns = reflection_file.reciprocal_space_objects["FCALC"]
fc_merged_cns = fc_merged.customized_copy(
indices=fc_merged_cns.indices,
data=fc_merged_cns.data).map_to_asu().common_set(fc_merged)
assert fc_merged_cns.indices().all_eq(fc_merged.indices())
fc_merged_a = fc_merged.select_acentric()
fc_merged_cns_a = fc_merged_cns.select_acentric()
for part in [flex.real, flex.imag]:
cc = flex.linear_correlation(
part(fc_merged_a.data()),
part(fc_merged_cns_a.data())).coefficient()
if (cc < 1-1.e-6):
print "FAILURE acentrics", sg_fcalc.space_group_info()
if (0): return
raise AssertionError
names, miller_indices, hl = reflection_file.join_hl_group()
assert names == ["PA", "PB", "PC", "PD"]
hl_merged_cns = hl_merged.customized_copy(indices=miller_indices, data=hl)\
.map_to_asu().common_set(hl_merged)
assert hl_merged_cns.indices().all_eq(hl_merged.indices())
for h,a,b in zip(hl_merged.indices(),
hl_merged.data(),
hl_merged_cns.data()):
if (not approx_equal(a, b, eps=5.e-3)):
print h
print "cctbx:", a
print " cns:", b
if (0): return
raise AssertionError
def run():
structure = random_structure.xray_structure(
sgtbx.space_group_info("P21/c"),
elements=["Si"] * 10,
volume_per_atom=18.6,
min_distance=1.2,
general_positions_only=False)
miller_set_f_obs = miller.build_set(crystal_symmetry=structure,
anomalous_flag=True,
d_min=0.8)
f_obs = miller_set_f_obs.structure_factors_from_scatterers(
xray_structure=structure, algorithm="direct").f_calc()
fft_map = f_obs.fft_map(symmetry_flags=maptbx.use_space_group_symmetry)
padded = fft_map.real_map()
unpadded = fft_map.real_map_unpadded() # copy
unpadded_1d = unpadded.as_1d() # 1D view => in-place
mmm = flex.min_max_mean_double(unpadded_1d)
for delta in ((mmm.min + mmm.mean) / 2, mmm.mean,
(mmm.mean + mmm.max) / 2):
# in-place charge flipping
ab_initio.ext.flip_charges_in_place(padded, delta)
# same but on an unpadded copy using the flex tools
flipped_selection = unpadded_1d < delta
flipped = unpadded_1d.select(flipped_selection)
flipped *= -1
unpadded_1d.set_selected(flipped_selection, flipped)
assert approx_equal(padded, unpadded, 1e-15)
print(format_cpu_times())
def run_call_back(flags, space_group_info, params):
structure_shake = random_structure.xray_structure(
space_group_info,
elements=("N", "C", "O", "S", "Yb"),
volume_per_atom=200,
min_distance=2.0,
general_positions_only=params.general_positions_only,
random_u_iso=True)
structure_ideal = structure_shake.deep_copy_scatterers()
structure_shake.shake_sites_in_place(
rms_difference=params.shake_sites_rmsd)
structure_shake.shake_adp(spread=params.shake_adp_spread)
#
run_id = ""
if (params.pickle_root_name is not None):
run_id += params.pickle_root_name + "_"
run_id += str(space_group_info).replace(" ", "").replace("/", "_").lower()
if (params.pickle_root_name is not None):
pickle_file_name = run_id + "_ideal_shake.pickle"
print "writing file:", pickle_file_name
easy_pickle.dump(file_name=pickle_file_name,
obj=(structure_ideal, structure_shake))
print
sys.stdout.flush()
#
ls_result = run_refinement(structure_ideal=structure_ideal,
structure_shake=structure_shake,
params=params,
run_id=run_id)
if (ls_result is not None and params.pickle_root_name is not None):
pickle_file_name = run_id + "_ls_history.pickle"
print "writing file:", pickle_file_name
easy_pickle.dump(file_name=pickle_file_name, obj=ls_result.history)
print
sys.stdout.flush()
def exercise(space_group_info,
anomalous_flag,
n_scatterers=8,
d_min=2,
verbose=0):
structure = random_structure.xray_structure(space_group_info,
elements=["const"] *
n_scatterers)
f_calc = structure.structure_factors(
d_min=d_min, anomalous_flag=anomalous_flag).f_calc()
f = abs(f_calc)
f = miller.array(miller_set=f, data=f.data(), sigmas=flex.sqrt(f.data()))
f = f.f_as_f_sq()
g = f.expand_to_p1()
merger_p1 = xray.merger(g.indices(), g.data(), g.sigmas(), g.space_group(),
g.anomalous_flag(), g.unit_cell())
p1_bic = merger_p1.bic()
p1_r = merger_p1.r_abs()
merger_nat = xray.merger(g.indices(), g.data(),
g.sigmas(), f.space_group(), g.anomalous_flag(),
g.unit_cell())
nat_bic = merger_nat.bic()
nat_r = merger_nat.r_abs()
assert nat_bic >= p1_bic
assert p1_r <= 1e-8
def randomly_exercise(
flipping_type,
space_group_info,
elements,
anomalous_flag,
d_min,
grid_resolution_factor=1. / 2,
verbose=False,
amplitude_type="F",
):
# Generate a random structure in real space, that we will try to recover
target_structure = random_structure.xray_structure(
space_group_info=space_group_info,
elements=elements,
use_u_iso=True,
random_u_iso=True,
random_u_iso_scale=0.04,
use_u_aniso=False,
)
exercise_one_structure(
target_structure,
flipping_type,
anomalous_flag,
d_min,
grid_resolution_factor=grid_resolution_factor,
verbose=verbose,
amplitude_type=amplitude_type,
)
def exercise(space_group_info, anomalous_flag,
d_min=1.0, reflections_per_bin=200, n_bins=10, verbose=0):
elements = ("N", "C", "C", "O") * 5
structure_factors = random_structure.xray_structure(
space_group_info,
elements=elements,
volume_per_atom=50.,
min_distance=1.5,
general_positions_only=True,
use_u_aniso=False,
u_iso=adptbx.b_as_u(10)
).structure_factors(
anomalous_flag=anomalous_flag, d_min=d_min, algorithm="direct")
if (0 or verbose):
structure_factors.xray_structure().show_summary()
asu_contents = dicts.with_default_value(0)
for elem in elements: asu_contents[elem] += 1
f_calc = abs(structure_factors.f_calc())
f_calc.setup_binner(
auto_binning=True,
reflections_per_bin=reflections_per_bin,
n_bins=n_bins)
if (0 or verbose):
f_calc.binner().show_summary()
for k_given in [1,0.1,0.01,10,100]:
f_obs = miller.array(
miller_set=f_calc,
data=f_calc.data()*k_given).set_observation_type_xray_amplitude()
f_obs.use_binner_of(f_calc)
wp = statistics.wilson_plot(f_obs, asu_contents, e_statistics=True)
if (0 or verbose):
print "wilson_k, wilson_b:", wp.wilson_k, wp.wilson_b
print "space group:", space_group_info.group().type().hall_symbol()
print "<E^2-1>:", wp.mean_e_sq_minus_1
assert 0.8 < wp.wilson_k/k_given < 1.2
assert 0.64 < wp.wilson_intensity_scale_factor/(k_given*k_given) < 1.44
assert 9 < wp.wilson_b < 11
assert wp.xy_plot_info().fit_correlation == wp.fit_correlation
if space_group_info.group().is_centric():
assert 0.90 < wp.mean_e_sq_minus_1 < 1.16
assert 3.15 < wp.percent_e_sq_gt_2 < 6.5
else:
assert 0.65 < wp.mean_e_sq_minus_1 < 0.90
assert 1.0 < wp.percent_e_sq_gt_2 < 3.15
assert wp.normalised_f_obs.size() == f_obs.size()
f_obs = f_calc.array(data=flex.double(f_calc.indices().size(), 0))
f_obs.use_binner_of(f_calc)
n_bins = f_obs.binner().n_bins_used()
try:
statistics.wilson_plot(f_obs, asu_contents)
except RuntimeError, e:
assert not show_diff(str(e), """\
wilson_plot error: %d empty bins:
Number of bins: %d
Number of f_obs > 0: 0
Number of f_obs <= 0: %d""" % (n_bins, n_bins, f_obs.indices().size()))
def exercise_3_f_part1_and_f_part2():
x = random_structure.xray_structure(
space_group_info = sgtbx.space_group_info("P 4"),
elements =(("O","N","C")*10),
volume_per_atom = 200,
min_distance = 1.5,
general_positions_only = True,
random_u_iso = True,
random_occupancy = False)
x.scattering_type_registry(table="wk1995")
fc = x.structure_factors(d_min = 2.0, algorithm="direct").f_calc()
#
x1 = random_structure.xray_structure(
space_group_info = sgtbx.space_group_info("P 4"),
unit_cell = x.unit_cell(),
elements =(("C")*10),
volume_per_atom = 200,
min_distance = 1.5,
general_positions_only = True,
random_u_iso = True,
random_occupancy = False)
x1.scattering_type_registry(table="wk1995")
fc1 = x1.structure_factors(d_min = 2.0, algorithm="direct").f_calc()
#
x2 = random_structure.xray_structure(
space_group_info = sgtbx.space_group_info("P 4"),
unit_cell = x.unit_cell(),
elements =(("C")*10),
volume_per_atom = 200,
min_distance = 1.5,
general_positions_only = True,
random_u_iso = True,
random_occupancy = False)
x2.scattering_type_registry(table="wk1995")
fc2 = x2.structure_factors(d_min = 2.0, algorithm="direct").f_calc()
#
fc_all = fc.customized_copy(data = fc.data()+fc1.data()+fc2.data())
f_obs = abs(fc_all.deep_copy())
r_free_flags = f_obs.generate_r_free_flags(fraction = 0.1)
sfg_params = mmtbx.f_model.sf_and_grads_accuracy_master_params.extract()
sfg_params.algorithm = "direct"
#
t_exercise_3_1(x=x, f_obs=f_obs, fc1=fc1, fc2=fc2, r_free_flags=r_free_flags,
sfg_params=sfg_params)
def run_00():
time_aniso_u_scaler = 0
for symbol in sgtbx.bravais_types.acentric + sgtbx.bravais_types.centric:
#print symbol, "-"*50
space_group_info = sgtbx.space_group_info(symbol = symbol)
xrs = random_structure.xray_structure(
space_group_info = space_group_info,
elements = ["N"]*100,
volume_per_atom = 50.0,
random_u_iso = True)
# XXX ad a method to adptbx to do this
point_group = sgtbx.space_group_info(
symbol=symbol).group().build_derived_point_group()
adp_constraints = sgtbx.tensor_rank_2_constraints(
space_group=point_group,
reciprocal_space=True)
u_star = adptbx.u_cart_as_u_star(xrs.unit_cell(),
adptbx.random_u_cart(u_scale=1,u_min=0.1))
u_indep = adp_constraints.independent_params(all_params=u_star)
u_star = adp_constraints.all_params(independent_params=u_indep)
b_cart_start=adptbx.u_as_b(adptbx.u_star_as_u_cart(xrs.unit_cell(), u_star))
#
tr = (b_cart_start[0]+b_cart_start[1]+b_cart_start[2])/3
b_cart_start = [b_cart_start[0]-tr,b_cart_start[1]-tr,b_cart_start[2]-tr,
b_cart_start[3],b_cart_start[4],b_cart_start[5]]
tr = (b_cart_start[0]+b_cart_start[1]+b_cart_start[2])/3
#
#print "Input b_cart :", " ".join(["%8.4f"%i for i in b_cart_start]), "tr:", tr
F = xrs.structure_factors(d_min = 2.0).f_calc()
u_star = adptbx.u_cart_as_u_star(
F.unit_cell(), adptbx.b_as_u(b_cart_start))
fbc = mmtbx.f_model.ext.k_anisotropic(F.indices(), u_star)
fc = F.structure_factors_from_scatterers(xray_structure=xrs).f_calc()
f_obs = F.customized_copy(data = flex.abs(fc.data()*fbc))
t0 = time.time()
#
obj = bulk_solvent.aniso_u_scaler(
f_model_abs = flex.abs(fc.data()),
f_obs = f_obs.data(),
miller_indices = f_obs.indices(),
adp_constraint_matrix = adp_constraints.gradient_sum_matrix())
time_aniso_u_scaler += (time.time()-t0)
b_cart_final = adptbx.u_as_b(adptbx.u_star_as_u_cart(f_obs.unit_cell(),
adp_constraints.all_params(tuple(obj.u_star_independent))))
#
obj = bulk_solvent.aniso_u_scaler(
f_model_abs = flex.abs(fc.data()),
f_obs = f_obs.data(),
miller_indices = f_obs.indices())
b_cart_final2 = adptbx.u_as_b(adptbx.u_star_as_u_cart(f_obs.unit_cell(),
tuple(obj.u_star)))
#
assert approx_equal(b_cart_final, b_cart_final2)
#print "Output b_cart:", " ".join(["%8.4f"%i for i in b_cart_final])
assert approx_equal(b_cart_start, b_cart_final, 1.e-4)
print "Time (aniso_u_scaler only): %6.4f"%time_aniso_u_scaler
def exercise_SFweight_spline(
space_group_info,
n_scatterers=10,
d_min=4,
verbose=0):
structure = random_structure.xray_structure(
space_group_info,
elements=["C"]*n_scatterers,
volume_per_atom=1000)
sfweight = exercise_SFweight_spline_core(
structure=structure, d_min=d_min, verbose=verbose)
def run_group(symbol):
group = space_group_info(symbol);
print "\n=="
elements = ('C', 'N', 'O', 'H')*11
xrs = random_structure.xray_structure(
space_group_info = group,
volume_per_atom = 25.,
general_positions_only = False,
elements = elements,
min_distance = 1.0)
fo = abs(xrs.structure_factors(d_min=2).f_calc())
fmodel = mmtbx.f_model.manager(
f_obs = fo,
xray_structure = xrs)
#
k_sol=flex.double([10.35,5.34])
b_sol=flex.double([30.0, 24.0])
b_cart = [10,20,30,40,50,60]
u_star = flex.double(adptbx.b_as_u(
adptbx.u_cart_as_u_star(xrs.unit_cell(), b_cart)))
#
TGO = cpp_tg(fmodel=fmodel)
tg = TGO.get_tg(k_sol=k_sol, b_sol=b_sol, u_star=u_star)
# k_sol
gk_a=list(tg.grad_k_sols())
ck_a=list(tg.curv_k_sols())
gk_fd, ck_fd=fd(TGO=TGO, k_sol=k_sol, b_sol=b_sol, u_star=u_star, param="k_sol")
# b_sol
gb_a=list(tg.grad_b_sols())
cb_a=list(tg.curv_b_sols())
gb_fd, cb_fd=fd(TGO=TGO, k_sol=k_sol, b_sol=b_sol, u_star=u_star, param="b_sol")
# u_star
gu_a=list(tg.grad_u_star())
gu_fd, junk=fd(TGO=TGO, k_sol=k_sol, b_sol=b_sol, u_star=u_star, param="u_star")
print "u_star:",gu_a
print "u_star:",gu_fd
TGO2 = cpp_tg_u_star_only(fmodel=fmodel)
tg2 = TGO2.get_tg(k_sol=k_sol, b_sol=b_sol, u_star=u_star)
gu_a2=list(tg2.grad_u_star())
gu_fd2, junk=fd(TGO=TGO2, k_sol=k_sol, b_sol=b_sol, u_star=u_star, param="u_star")
print "u_star:",gu_a2
print "u_star:",gu_fd2
#
print "k_sol:", gk_a, ck_a
print "k_sol:", gk_fd, ck_fd
print "b_sol:", gb_a, cb_a
print "b_sol:", gb_fd, cb_fd
#
assert approx_equal(gk_a, gk_fd, eps=1.e-4)
assert approx_equal(gb_a, gb_fd, eps=1.e-4)
assert approx_equal(ck_a, ck_fd, eps=1.e-4)
assert approx_equal(cb_a, cb_fd, eps=1.e-4)
assert approx_equal(gu_a, gu_fd, eps=1.e-4)
assert approx_equal(gu_a2, gu_fd2, eps=1.e-6)
def exercise_all(flags, space_group_info):
exercise_float_asu(space_group_info)
exercise_asu_mappings(space_group_info)
exercise_neighbors_pair_generators(
structure = random_structure.xray_structure(
space_group_info,
elements=["Si"]*5,
volume_per_atom=100,
min_distance=3.,
general_positions_only=False),
verbose=flags.Verbose)
def exercise_4(grid_step,
radius,
shell,
a,
b,
d_min,
volume_per_atom,
use_weights,
optimize_cutoff_radius,
scatterer_chemical_type = "C"):
xray_structure = random_structure.xray_structure(
space_group_info = sgtbx.space_group_info("P 1"),
elements = ((scatterer_chemical_type)*1),
volume_per_atom = volume_per_atom,
min_distance = 1.5,
general_positions_only = True)
custom_dict = \
{scatterer_chemical_type: eltbx.xray_scattering.gaussian([a],[b])}
xray_structure.scattering_type_registry(custom_dict = custom_dict)
miller_set = miller.build_set(
crystal_symmetry = xray_structure.crystal_symmetry(),
anomalous_flag = False,
d_min = d_min,
d_max = None)
f_calc = miller_set.structure_factors_from_scatterers(
xray_structure = xray_structure,
algorithm = "direct",
cos_sin_table = False,
exp_table_one_over_step_size = False).f_calc()
fft_map = f_calc.fft_map(grid_step = grid_step, symmetry_flags = None)
fft_map = fft_map.apply_volume_scaling()
site_frac = xray_structure.sites_frac()
m = fft_map.real_map_unpadded()
amm = abs(flex.max(m))
r = abs(amm-abs(m.value_at_closest_grid_point(site_frac[0]))) / amm
assert r < 0.15, r
around_atom_obj_ = mmtbx.real_space.around_atom(
unit_cell = xray_structure.unit_cell(),
map_data = fft_map.real_map_unpadded(),
radius = radius,
shell = shell,
site_frac = list(xray_structure.sites_frac())[0])
data = around_atom_obj_.data()
dist = around_atom_obj_.distances()
approx_obj_ = maptbx.one_gaussian_peak_approximation(
data_at_grid_points = data,
distances = dist,
use_weights = use_weights,
optimize_cutoff_radius = optimize_cutoff_radius)
assert approx_equal(approx_obj_.a_reciprocal_space(), 6.0, 0.1)
assert approx_equal(approx_obj_.b_reciprocal_space(), 3.0, 0.1)
assert approx_obj_.gof() < 1.0
assert approx_obj_.cutoff_radius() < radius
def exercise(flags, space_group_info):
# Prepare a structure compatible with the ShelX model
xs = random_structure.xray_structure(
space_group_info, elements="random", n_scatterers=10, use_u_iso=True, random_u_iso=True, use_u_aniso=True
)
xs.apply_symmetry_sites()
xs.apply_symmetry_u_stars()
for isotropic, sc in itertools.izip(variate(bernoulli_distribution(0.4)), xs.scatterers()):
sc.flags.set_grad_site(True)
if isotropic:
sc.flags.set_use_u_iso(True)
sc.flags.set_use_u_aniso(False)
sc.flags.set_grad_u_iso(True)
else:
sc.flags.set_use_u_iso(False)
sc.flags.set_use_u_aniso(True)
sc.flags.set_grad_u_aniso(True)
not_origin_centric = xs.space_group().is_centric() and not xs.space_group().is_origin_centric()
try:
ins = list(
shelx.writer.generator(
xs, full_matrix_least_squares_cycles=4, weighting_scheme_params=(0, 0), sort_scatterers=False
)
)
except AssertionError:
if not_origin_centric:
print("Omitted %s\n because it is centric but not origin centric" % xs.space_group().type().hall_symbol())
return
raise
else:
if not_origin_centric:
raise Exception_expected
ins = cStringIO.StringIO("".join(ins))
xs1 = xs.from_shelx(file=ins)
xs.crystal_symmetry().is_similar_symmetry(
xs1.crystal_symmetry(), relative_length_tolerance=1e-3, absolute_angle_tolerance=1e-3
)
uc = xs.unit_cell()
uc1 = xs1.unit_cell()
for sc, sc1 in itertools.izip(xs.scatterers(), xs1.scatterers()):
assert sc.label.upper() == sc1.label.upper()
assert sc.scattering_type == sc1.scattering_type
assert sc.flags.bits == sc1.flags.bits
assert approx_equal(sc.site, sc1.site, eps=1e-6)
if sc.flags.use_u_iso():
assert approx_equal(sc.u_iso, sc1.u_iso, eps=1e-5)
else:
assert approx_equal(
adptbx.u_star_as_u_cif(uc, sc.u_star), adptbx.u_star_as_u_cif(uc1, sc1.u_star), eps=1e-5
)
def set_up_random_structure(space_group_info):
from cctbx.development import random_structure
xray_structure = random_structure.xray_structure(
space_group_info = space_group_info,
elements =("O", "P")*4,
volume_per_atom = 100,
min_distance = 1.5,
general_positions_only = True,
random_u_iso = True,
random_occupancy = True)
xray_structure.scattering_type_registry(table="wk1995")
return xray_structure