def get_config(self, list_of_commands, list_of_devices):
device_output = {}
for device in list_of_devices:
outputs = []
for command in list_of_commands:
if not show_cmd_ssh(device, self.username, self.password,
command):
return False
for data in show_cmd_ssh(device, self.username, self.password,
command):
outputs.append(data.strip('\r\n'))
device_output[device] = outputs
return device_output
def cisco_interfaces_status(self):
if self.device_type == "Cisco IOS":
run_config = cisco.show_cmd_ssh(self.hostname, self.username,
self.password, "show ip int brief")
elif self.device_type == "Junos":
run_config = cisco.show_cmd_ssh(self.hostname, self.username,
self.password,
"show interface terse")
self.ptedit_cmd_output.clear()
if run_config:
for config in run_config:
self.ptedit_cmd_output.appendPlainText(
config.replace("\r", "").strip('\n'))
def cisco_show_run_section(self):
section = self.edit_custom_command.text()
if self.combo_device_type.currentText() == "Cisco IOS":
if section:
command = "Show run | section " + section
else:
command = "show run"
elif self.combo_device_type.currentText() == "Junos":
if self.display_set == True:
command = "show configuration " + section + " | display set"
self.display_set = False
else:
command = "show configuration " + section
run_config = cisco.show_cmd_ssh(self.hostname, self.username,
self.password, command)
self.ptedit_cmd_output.clear()
if run_config:
for config in run_config:
self.ptedit_cmd_output.appendPlainText(
config.replace("\r", "").strip('\n'))
else:
self.ptedit_cmd_output.appendPlainText(
"No configurations found for this section")
def cisco_show_run(self):
if self.device_type == "Cisco IOS":
command = "show run"
elif self.device_type == "Junos":
if self.display_set == True:
command = "show configuration | display set"
self.display_set = False
else:
command = "show configuration"
run_config = cisco.show_cmd_ssh(self.hostname, self.username,
self.password, command)
self.ptedit_cmd_output.clear()
for config in run_config:
self.ptedit_cmd_output.appendPlainText(
config.replace("\r", "").strip('\n'))
def cisco_show_routing_table(self):
if self.device_type == "Cisco IOS":
command = "show ip route "
elif self.device_type == "Junos":
command = "show route "
if self.edit_custom_command.text():
command = command + self.edit_custom_command.text()
run_config = cisco.show_cmd_ssh(self.hostname, self.username,
self.password, command)
self.ptedit_cmd_output.clear()
if run_config:
for config in run_config:
self.ptedit_cmd_output.appendPlainText(
config.replace("\r", "").strip('\n'))
def cisco_custom_command(self):
if self.edit_custom_command.text():
command = self.edit_custom_command.text()
else:
self.edit_custom_command.setPlaceholderText(
"Please enter a command")
return
run_config = cisco.show_cmd_ssh(self.hostname, self.username,
self.password, command)
self.ptedit_cmd_output.clear()
if run_config:
for config in run_config:
self.ptedit_cmd_output.appendPlainText(
config.replace("\r", "").strip('\n'))
else:
self.ptedit_cmd_output.appendPlainText("Invalid command")
def cisco_show_cdp_neighbor(self):
if self.device_type == "Cisco IOS":
command = "show cdp neighbor "
elif self.device_type == "Junos":
command = "show lldp neighbor "
if self.edit_custom_command.text():
command = command + self.edit_custom_command.text()
run_config = cisco.show_cmd_ssh(self.hostname, self.username,
self.password, command)
self.ptedit_cmd_output.clear()
if run_config:
for config in run_config:
self.ptedit_cmd_output.appendPlainText(
config.replace("\r", "").strip('\n'))
else:
self.ptedit_cmd_output.appendPlainText("NO neighbors found")
def cisco_show_arp(self):
if self.device_type == "Cisco IOS":
command = "show ip arp "
if self.edit_custom_command.text():
command = command + self.edit_custom_command.text()
elif self.device_type == "Junos":
command = "show arp "
if self.edit_custom_command.text():
command = command + "hostname " + self.edit_custom_command.text(
)
run_config = cisco.show_cmd_ssh(self.hostname, self.username,
self.password, command)
self.ptedit_cmd_output.clear()
if run_config:
for config in run_config:
self.ptedit_cmd_output.appendPlainText(
config.replace("\r", "").strip('\n'))
else:
self.ptedit_cmd_output.appendPlainText(
"No arp entry found for this host.")
def pull_device_info(self):
#print(self.btn_connect.text())
# if self.btn_connect.text() == "Disconnect":
# self.edit_username.setEnabled(True)
# self.edit_password.setEnabled(True)
# self.label.setText("")
# self.btn_connect.setText("Connect")
self.hostname = self.edit_ip_add.text()
self.protocol = self.combo_protocol.currentText()
self.username = self.edit_username.text()
self.password = self.edit_password.text()
self.device_type = self.combo_device_type.currentText()
device_type = self.combo_device_type.currentText()
if cisco.connection_test_ssh(self.hostname, self.username,
self.password) == True:
# disable username/password fields
self.edit_username.setEnabled(False)
self.edit_password.setEnabled(False)
# connected message instead of error
self.label.setText("Connected")
self.btn_connect.setEnabled(False)
#self.btn_connect.setText("Disconnect")
self.combo_device_type.setEnabled(False)
if device_type == "Cisco IOS":
device_hostname = cisco.show_cmd_ssh(self.hostname,
self.username,
self.password,
"show run | in hostname")
device_hostname = device_hostname[0].split(' ')[1]
self.lbl_hostname.setText(device_hostname)
ios_version = cisco.show_cmd_ssh(self.hostname, self.username,
self.password,
"show version | in Version")
ios_version = ios_version[0]
self.lbl_ios_version.setText(ios_version)
cpu_status = cisco.show_cmd_ssh(self.hostname, self.username,
self.password,
"show proc cpu | in CPU")
cpu_status = cpu_status[0].strip('\n')
self.lbl_cpu_utilization.setText(cpu_status)
uptime = cisco.show_cmd_ssh(self.hostname, self.username,
self.password,
"show version | in time")
uptime = uptime[0].strip('\n')
self.lbl_uptime.setText(uptime)
elif device_type == "Junos":
device_hostname = cisco.show_cmd_ssh(
self.hostname, self.username, self.password,
"show version | match Hostname")
device_hostname = device_hostname[0].split(' ')[1]
self.lbl_hostname.setText(device_hostname)
ios_version = "before"
ios_version = cisco.show_cmd_ssh(
self.hostname, self.username, self.password,
'show version | match "Base OS Boot"')
ios_version = ios_version[0]
#print(ios_version)
self.lbl_ios_version.setText(ios_version)
uptime = cisco.show_cmd_ssh(self.hostname, self.username,
self.password,
"show system uptime")
for output in uptime:
if "up" in output:
self.lbl_uptime.setText(output)
else:
self.label.setText(
"Couldn't connect, Check username/password, connectivity to host"
)
#!/usr/bin/env python3
# private classes
from cisco import show_cmd_ssh
# show_cmd_ssh(hostname, username, password, command):
device_ip = input("device name? ")
user_name = input("username: "******"device password: "******"Filename for commands to run: ")
list_of_commands = []
with open(filename) as read_file:
for line in read_file:
list_of_commands.append(line.strip('\n'))
print(list_of_commands)
with open(f"{device_ip}", "w") as file:
for command in list_of_commands:
result = show_cmd_ssh(device_ip, user_name, device_password, command)
file.write('\n' + command + "\n")
for data in result:
file.write(data.strip('\r\n'))
file.write("\n")
