Exemple #1
0
 def __init__(self, *, x_min, y_min, x_max, y_max, \
                       reso, init_val=0.0):
   self.x_min=x_min
   self.y_min=y_min
   self.x_max=x_max
   self.y_max=y_max
   self.reso=reso
   self.init_val=init_val
   self.x_tick_num=my_round((x_max-x_min)/reso)+1
   self.y_tick_num=my_round((y_max-y_min)/reso)+1
Exemple #2
0
 def __init__(self, *, max_range, min_angle, max_angle, angle_res):
   self.max_range = max_range
   self.min_angle = min_angle
   self.max_angle = max_angle
   self.angle_res = angle_res
   self.ray_cnt = my_round((max_angle - min_angle) / angle_res) + 1
   self.ranges = np.zeros(self.ray_cnt)
    def register_fixed_scan(self, *, pose, scans, map2d):

        conf = map2d.get_map_config()

        # Convert coordinate from global to map.
        x_map_scan_st, y_map_scan_st = \
          GridMap2D.convert_global_2_map(pose.x, pose.y, conf.x_min, conf.y_min, conf.reso)
        map_scan_st = MapIntCoord2D(x=x_map_scan_st, y=y_map_scan_st)
        map_scan_ends_world, map_scan_ends_map = self._convert_scan_hit_pnt_2_world_and_map_pnt(
            pose, scans, conf)

        min_pnt = MapIntCoord2D(x=0, y=0)
        max_pnt = MapIntCoord2D(x=conf.x_tick_num - 1, y=conf.y_tick_num - 1)

        for scan_idx, end_coord in enumerate(map_scan_ends_map):

            if (map_scan_st.x == end_coord.x and map_scan_st.y == end_coord.y):
                continue

            path = RayTracing2D.ray_tracing(map_scan_st, end_coord, min_pnt,
                                            max_pnt)

            for index, coord in enumerate(path):

                # When reacnes last element, break.
                if (index == len(path) - 1):
                    break

                x_map = my_round(coord.x)
                y_map = my_round(coord.y)
                if (not map2d.is_valid_map_coord(x_map, y_map)):
                    break

                val = map2d.get_val_via_map_coord(x_map=x_map, y_map=y_map)
                if (val != 1.0):
                    map2d.update_val_via_map_coord(x_map=x_map,
                                                   y_map=y_map,
                                                   value=0.0)

            x_hit_map = my_round(path[len(path) - 1].x)
            y_hit_map = my_round(path[len(path) - 1].y)

            if (map2d.is_valid_map_coord(x_hit_map, y_hit_map)
                    and scans.ranges[scan_idx] < scans.max_range):
                map2d.update_val_via_map_coord(x_map=x_hit_map,
                                               y_map=y_hit_map,
                                               value=1.0)
Exemple #4
0
 def __init__(self, *, x_min, x_max, \
              reso, pred_sigma, meas_sigma, \
              gt_landmark, init_pose=0.0):
     self.x_min = x_min
     self.x_max = x_max
     self.reso = reso
     self.init_pose = init_pose
     self.x_tick_num = my_round((x_max - x_min) / reso) + 1
     self.pred_sigma = pred_sigma
     self.meas_sigma = meas_sigma
     self.gt_landmark = gt_landmark
  def __calc_t_dist_to_next_border(x0, x1):
  
    dist = int(math.fabs(my_math.my_round(x0) - my_math.my_round(x1)))

    if (x0 < x1):
      dt_dx = 1 / (x1 - x0)
      dx = ((math.floor(x0) + 1) - x0)
      proc_dir = 1
      next_t_dist = dt_dx * dx
    elif(x1 < x0):
      dt_dx = 1 / (x0 - x1)
      dx = (x0 - math.floor(x0))
      proc_dir = -1
      next_t_dist = dt_dx * dx
    else:
      dt_dx = float('inf')
      dx = 0.0
      proc_dir = 0
      next_t_dist = float('inf')
    
    return next_t_dist, dt_dx, proc_dir, dist
Exemple #6
0
  def draw_point(map2d, x, y, width, value):

    conf = map2d.get_map_config()
    x_map, y_map = GridMap2D.convert_global_2_map(x, y, conf.x_min, conf.y_min, conf.reso)

    half_width_map = my_round(width / conf.reso / 2.0)
    map2d.fill_val_via_map_coord(
        x_map_st=x_map-half_width_map,
        y_map_st=y_map-half_width_map,
        x_map_en=x_map+half_width_map,
        y_map_en=y_map+half_width_map,
        value=value)
Exemple #7
0
 def __init__(self,
              *,
              range_max,
              min_angle,
              max_angle,
              angle_res,
              sigma=0.0):
     self.range_max = range_max
     self.min_angle = min_angle
     self.max_angle = max_angle
     self.angle_res = angle_res
     self.sigma = sigma
     self.ray_cnt = int(my_round((max_angle - min_angle) / angle_res) + 1)
  def ray_tracing(st_pnt, end_pnt, min_pnt, max_pnt):

    next_t_dist_ver, dt_dx, proc_dir_x, dist_x =\
        RayTracing2D.__calc_t_dist_to_next_border(st_pnt.x, end_pnt.x)
    next_t_dist_hor, dt_dy, proc_dir_y, dist_y =\
        RayTracing2D.__calc_t_dist_to_next_border(st_pnt.y, end_pnt.y)
    
    total_dist = dist_x + dist_y + 1    

    x = my_math.my_round(st_pnt.x)
    y = my_math.my_round(st_pnt.y)

    path = np.zeros((2, total_dist), dtype=int)
    path = [MapIntCoord2D() for i in range(total_dist)]

    path[0].x = x
    path[0].y = y

    cnt = 1
    for i in range(total_dist - 1, 0, -1):

      if (next_t_dist_ver < next_t_dist_hor):
        x = x + proc_dir_x
        next_t_dist_ver = next_t_dist_ver + dt_dx
      else:
        y = y + proc_dir_y
        next_t_dist_hor = next_t_dist_hor + dt_dy

      if ((x < min_pnt.x or max_pnt.x < x) or \
          (y < min_pnt.y or max_pnt.y < y)):
        break

      path[cnt].x = x
      path[cnt].y = y
      cnt = cnt + 1

    return path[0:cnt]
Exemple #9
0
    def __init__(self, *, histogram_config):
        self._config = histogram_config

        self._last_prob = np.array(\
          [0.0 for i in range(self._config.x_tick_num)])
        self._new_prob = np.array(\
          [0.0 for i in range(self._config.x_tick_num)])

        st_pos = my_round((self._config.init_pose - \
                  self._config.x_min) / self._config.reso)
        self._last_prob[st_pos] = 1.0 / self._config.reso
        self._new_prob[st_pos] = 1.0 / self._config.reso

        delta = self._config.reso * 0.00000001
        self._x_ticks = np.mgrid[\
          slice(self._config.x_min-self._config.reso/2.0, \
          self._config.x_max+self._config.reso/2.0+delta, \
          self._config.reso)]
Exemple #10
0
 def convert_global_2_map(x, y, min_x, min_y, reso):
   x_map = my_round((x - min_x)/reso)
   y_map = my_round((y - min_y)/reso)
   return x_map, y_map