def test_panel_field_outputs():
m = 7
n = 6
#TODO implement for conical panels
strain_field = dict(exx=None, eyy=None, gxy=None, kxx=None, kyy=None, kxy=None)
stress_field = dict(Nxx=None, Nyy=None, Nxy=None, Mxx=None, Myy=None, Mxy=None)
for model in ['plate_clt_donnell_bardell',
'cpanel_clt_donnell_bardell']:
p = Panel()
p.model = model
p.u1tx = 1
p.u1ty = 1
p.u2ty = 1
p.v1tx = 0
p.v2tx = 0
p.v1ty = 0
p.v2ty = 0
p.a = 2.
p.b = 1.
p.r = 1.e5
p.stack = [0, -45, +45, 90, +45, -45, 0, 0]
p.plyt = 1e-3*0.125
p.laminaprop = (142.5e9, 8.7e9, 0.28, 5.1e9, 5.1e9, 5.1e9)
p.nx = m
p.ny = n
p.m = m
p.n = n
P = 1000.
npts = 100
p.forces_inc = []
for y in np.linspace(0, p.b, npts):
p.forces_inc.append([0., y, P/(npts-1.), 0, 0])
p.forces_inc[0][2] /= 2.
p.forces_inc[-1][2] /= 2.
p.static()
c = p.analysis.cs[0]
Ns = p.stress(c, gridx=50, gridy=50)
es = p.strain(c, gridx=50, gridy=50)
for k, v in strain_field.items():
if v is None:
strain_field[k] = es.get(k).min()
else:
assert np.isclose(strain_field[k], es.get(k).min(), rtol=0.05)
p.plot(c, vec=k, filename='tmp_test_panel_strain_field_%s.png' % k)
for k, v in stress_field.items():
if v is None:
stress_field[k] = Ns.get(k).min()
else:
assert np.isclose(stress_field[k], Ns.get(k).min(), rtol=0.05)
p.plot(c, vec=k, filename='tmp_test_panel_stress_field_%s.png' % k)
def test_fint():
m = 6
n = 6
for model in ['plate_clt_donnell_bardell',
'cpanel_clt_donnell_bardell'
]:
p = Panel()
p.model = model
p.w1tx = 0
p.w1rx = 1
p.u1tx = 1
p.u1ty = 1
p.u2ty = 1
p.a = 2.
p.b = 1.
p.r = 1.e5
p.stack = [0, 90, -45, +45]
p.plyt = 1e-3*0.125
p.laminaprop = (142.5e9, 8.7e9, 0.28, 5.1e9, 5.1e9, 5.1e9)
p.nx = m
p.ny = n
p.m = m
p.n = n
P = 1000.
npts = 100
p.forces_inc = []
for y in np.linspace(0, p.b, npts):
p.forces_inc.append([0., y, P/(npts-1.), 0, 0])
p.forces_inc[0][2] /= 2.
p.forces_inc[-1][2] /= 2.
p.forces.append([p.a/2., p.b/2., 0, 0, 0.001])
p.static(NLgeom=True, silent=True)
c = p.analysis.cs[0]
p.plot(c, vec='w', filename='tmp_test_non_linear.png', colorbar=True)
p.uvw(p.analysis.cs[0])
assert np.isclose(p.w.max(), 0.000144768080125, rtol=0.001)
def test_kT():
mns = [[4, 4], [4, 5], [4, 6], [5, 5], [5, 6], [6, 6],
[8, 9], [9, 8]]
for m, n in mns:
for model in ['plate_clt_donnell_bardell',
'cpanel_clt_donnell_bardell']:
p = Panel()
p.model = model
p.w1tx = 0
p.u1tx = 1
p.u1ty = 1
p.u2ty = 1
p.a = 2.
p.b = 0.5
p.r = 10
p.stack = [0, 90, -45, +45]
p.plyt = 1e-3*0.125
p.laminaprop = (142.5e9, 8.7e9, 0.28, 5.1e9, 5.1e9, 5.1e9)
p.m = m
p.n = n
p.nx = m
p.ny = n
P = 1000.
npts = 5
p.forces_inc = []
for y in np.linspace(0, p.b, npts):
p.forces_inc.append([0., y, P/(npts-1.), 0, 0])
p.forces_inc[0][2] /= 2.
p.forces_inc[-1][2] /= 2.
k0 = p.calc_k0(silent=True)
kT = p.calc_kT(c=np.zeros(p.get_size()), silent=True)
error = np.abs(kT-k0).sum()
assert error < 1.e-7
def add_panel(self, y1, y2, stack=None, plyts=None, plyt=None,
laminaprops=None, laminaprop=None, model=None, mu=None, **kwargs):
"""Add a new panel to the current panel bay
Parameters
----------
y1 : float
Position of the first panel edge along `y`.
y2 : float
Position of the second panel edge along `y`.
stack : list, optional
Panel stacking sequence. If not given the stacking sequence of the
bay will be used.
plyts : list, optional
Thicknesses for each panel ply. If not supplied the bay ``plyts``
attribute will be used.
plyt : float, optional
Unique thickness to be used for all panel plies. If not supplied
the bay ``plyt`` attribute will be used.
laminaprops : list, optional
Lamina properties for each panel ply.
laminaprop : list, optional
Unique lamina properties for all panel plies.
model : str, optional
Not recommended to pass this parameter, but the user can use a
different model for each panel. It is recommended to defined
``model`` for the bay object.
mu : float, optional
Panel material density. If not given the bay density will be used.
Notes
-----
Additional parameters can be passed using the ``kwargs``.
"""
p = Panel()
p.m = self.m
p.n = self.n
p.a = self.a
p.b = self.b
p.r = self.r
p.y1 = y1
p.y2 = y2
p.d = 0.
p.model = model if model is not None else self.model
p.stack = stack if stack is not None else self.stack
p.plyt = plyt if plyt is not None else self.plyt
p.plyts = plyts if plyts is not None else self.plyts
p.laminaprop = laminaprop if laminaprop is not None else self.laminaprop
p.laminaprops = laminaprops if laminaprops is not None else self.laminaprops
p.mu = mu if mu is not None else self.mu
p.u1tx = self.u1tx
p.u1rx = self.u1rx
p.u2tx = self.u2tx
p.u2rx = self.u2rx
p.v1tx = self.v1tx
p.v1rx = self.v1rx
p.v2tx = self.v2tx
p.v2rx = self.v2rx
p.w1tx = self.w1tx
p.w1rx = self.w1rx
p.w2tx = self.w2tx
p.w2rx = self.w2rx
p.u1ty = self.u1ty
p.u1ry = self.u1ry
p.u2ty = self.u2ty
p.u2ry = self.u2ry
p.v1ty = self.v1ty
p.v1ry = self.v1ry
p.v2ty = self.v2ty
p.v2ry = self.v2ry
p.w1ty = self.w1ty
p.w1ry = self.w1ry
p.w2ty = self.w2ty
p.w2ry = self.w2ry
for k, v in kwargs.items():
setattr(p, k, v)
self.panels.append(p)
def test_4panels_kt_kr():
"""Compare result of 4 assembled panels with single-domain results
The panel assembly looks like::
_________ _____
| | |
| | |
| p01 | p02 |
| | |
|_________|_____|
| p03 | p04 |
| | |
| | |
| | |
| | |
| | |
|_________|_____|
"""
print('Testing validity of the default kt and kr values')
plyt = 1.e-3 * 0.125
laminaprop=(142.5e9, 8.7e9, 0.28, 5.1e9, 5.1e9, 5.1e9)
stack=[0, 45, -45, 90, -45, 45, 0]
lam = laminate.read_stack(stack=stack, plyt=plyt, laminaprop=laminaprop)
mu=1.3e3
r = 10.
m = 8
n = 8
a1 = 1.5
a2 = 1.5
a3 = 2.5
a4 = 2.5
b1 = 1.5
b2 = 0.5
b3 = 1.5
b4 = 0.5
A11 = lam.ABD[0, 0]
A22 = lam.ABD[1, 1]
D11 = lam.ABD[3, 3]
D22 = lam.ABD[4, 4]
p01 = Panel(group='panels', x0=a3, y0=b2, a=a1, b=b1, r=r, m=m, n=n, plyt=plyt, stack=stack, laminaprop=laminaprop, mu=mu)
p02 = Panel(group='panels', x0=a3, y0=0, a=a2, b=b2, r=r, m=m, n=n, plyt=plyt, stack=stack, laminaprop=laminaprop, mu=mu)
p03 = Panel(group='panels', x0=0, y0=b2, a=a3, b=b3, r=r, m=m, n=n, plyt=plyt, stack=stack, laminaprop=laminaprop, mu=mu)
p04 = Panel(group='panels', x0=0, y0=0, a=a4, b=b4, r=r, m=m, n=n, plyt=plyt, stack=stack, laminaprop=laminaprop, mu=mu)
kt13, kr13 = connections.calc_kt_kr(p01, p03, 'xcte')
kt24, kr24 = connections.calc_kt_kr(p02, p04, 'xcte')
kt12, kr12 = connections.calc_kt_kr(p01, p02, 'ycte')
kt34, kr34 = connections.calc_kt_kr(p03, p04, 'ycte')
# boundary conditions
p01.u1tx = 1 ; p01.u1rx = 1 ; p01.u2tx = 0 ; p01.u2rx = 1
p01.v1tx = 1 ; p01.v1rx = 1 ; p01.v2tx = 0 ; p01.v2rx = 1
p01.w1tx = 1 ; p01.w1rx = 1 ; p01.w2tx = 0 ; p01.w2rx = 1
p01.u1ty = 1 ; p01.u1ry = 1 ; p01.u2ty = 0 ; p01.u2ry = 1
p01.v1ty = 1 ; p01.v1ry = 1 ; p01.v2ty = 0 ; p01.v2ry = 1
p01.w1ty = 1 ; p01.w1ry = 1 ; p01.w2ty = 0 ; p01.w2ry = 1
p02.u1tx = 1 ; p02.u1rx = 1 ; p02.u2tx = 0 ; p02.u2rx = 1
p02.v1tx = 1 ; p02.v1rx = 1 ; p02.v2tx = 0 ; p02.v2rx = 1
p02.w1tx = 1 ; p02.w1rx = 1 ; p02.w2tx = 0 ; p02.w2rx = 1
p02.u1ty = 0 ; p02.u1ry = 1 ; p02.u2ty = 1 ; p02.u2ry = 1
p02.v1ty = 0 ; p02.v1ry = 1 ; p02.v2ty = 1 ; p02.v2ry = 1
p02.w1ty = 0 ; p02.w1ry = 1 ; p02.w2ty = 1 ; p02.w2ry = 1
p03.u1tx = 0 ; p03.u1rx = 1 ; p03.u2tx = 1 ; p03.u2rx = 1
p03.v1tx = 0 ; p03.v1rx = 1 ; p03.v2tx = 1 ; p03.v2rx = 1
p03.w1tx = 0 ; p03.w1rx = 1 ; p03.w2tx = 1 ; p03.w2rx = 1
p03.u1ty = 1 ; p03.u1ry = 1 ; p03.u2ty = 0 ; p03.u2ry = 1
p03.v1ty = 1 ; p03.v1ry = 1 ; p03.v2ty = 0 ; p03.v2ry = 1
p03.w1ty = 1 ; p03.w1ry = 1 ; p03.w2ty = 0 ; p03.w2ry = 1
p04.u1tx = 0 ; p04.u1rx = 1 ; p04.u2tx = 1 ; p04.u2rx = 1
p04.v1tx = 0 ; p04.v1rx = 1 ; p04.v2tx = 1 ; p04.v2rx = 1
p04.w1tx = 0 ; p04.w1rx = 1 ; p04.w2tx = 1 ; p04.w2rx = 1
p04.u1ty = 0 ; p04.u1ry = 1 ; p04.u2ty = 1 ; p04.u2ry = 1
p04.v1ty = 0 ; p04.v1ry = 1 ; p04.v2ty = 1 ; p04.v2ry = 1
p04.w1ty = 0 ; p04.w1ry = 1 ; p04.w2ty = 1 ; p04.w2ry = 1
conndict = [
dict(p1=p01, p2=p02, func='SSycte', ycte1=0, ycte2=p02.b, kt=kt12, kr=kr12),
dict(p1=p01, p2=p03, func='SSxcte', xcte1=0, xcte2=p03.a, kt=kt13, kr=kr13),
dict(p1=p02, p2=p04, func='SSxcte', xcte1=0, xcte2=p04.a, kt=kt24, kr=kr24),
dict(p1=p03, p2=p04, func='SSycte', ycte1=0, ycte2=p04.b, kt=kt34, kr=kr34),
]
panels = [p01, p02, p03, p04]
size = sum([3*p.m*p.n for p in panels])
k0 = 0
kM = 0
row0 = 0
col0 = 0
for p in panels:
k0 += p.calc_k0(row0=row0, col0=col0, size=size, silent=True, finalize=False)
kM += p.calc_kM(row0=row0, col0=col0, size=size, silent=True, finalize=False)
p.row_start = row0
p.col_start = col0
row0 += 3*p.m*p.n
col0 += 3*p.m*p.n
p.row_end = row0
p.col_end = col0
for conn in conndict:
if conn.get('has_deffect'): # connecting if there is no deffect
continue
p1 = conn['p1']
p2 = conn['p2']
if conn['func'] == 'SSycte':
k0 += connections.kCSSycte.fkCSSycte11(
conn['kt'], conn['kr'], p1, conn['ycte1'],
size, p1.row_start, col0=p1.col_start)
k0 += connections.kCSSycte.fkCSSycte12(
conn['kt'], conn['kr'], p1, p2, conn['ycte1'], conn['ycte2'],
size, p1.row_start, col0=p2.col_start)
k0 += connections.kCSSycte.fkCSSycte22(
conn['kt'], conn['kr'], p1, p2, conn['ycte2'],
size, p2.row_start, col0=p2.col_start)
elif conn['func'] == 'SSxcte':
k0 += connections.kCSSxcte.fkCSSxcte11(
conn['kt'], conn['kr'], p1, conn['xcte1'],
size, p1.row_start, col0=p1.col_start)
k0 += connections.kCSSxcte.fkCSSxcte12(
conn['kt'], conn['kr'], p1, p2, conn['xcte1'], conn['xcte2'],
size, p1.row_start, col0=p2.col_start)
k0 += connections.kCSSxcte.fkCSSxcte22(
conn['kt'], conn['kr'], p1, p2, conn['xcte2'],
size, p2.row_start, col0=p2.col_start)
assert np.any(np.isnan(k0.data)) == False
assert np.any(np.isinf(k0.data)) == False
k0 = csr_matrix(make_symmetric(k0))
assert np.any(np.isnan(kM.data)) == False
assert np.any(np.isinf(kM.data)) == False
kM = csr_matrix(make_symmetric(kM))
eigvals, eigvecs = freq(k0, kM, tol=0, sparse_solver=True, silent=True,
sort=True, reduced_dof=False,
num_eigvalues=25, num_eigvalues_print=5)
# Results for single panel
m = 15
n = 15
singlepanel = Panel(a=(a1+a3), b=(b1+b2), r=r, m=m, n=n, plyt=plyt, stack=stack, laminaprop=laminaprop, mu=mu)
singlepanel.freq(silent=True)
assert np.isclose(eigvals[0], singlepanel.eigvals[0], atol=0.01, rtol=0.01)
def tstiff2d_1stiff_flutter(a, b, ys, bb, bf, defect_a, mu, plyt,
laminaprop, stack_skin, stack_base, stack_flange,
air_speed=None, rho_air=None, Mach=None, speed_sound=None, flow='x',
Nxx_skin=None, Nxx_base=None, Nxx_flange=None, run_static_case=True,
r=None, m=8, n=8, mb=None, nb=None, mf=None, nf=None):
r"""Flutter of T-Stiffened Panel with possible defect at middle
For more details about each parameter and the aerodynamic formulation see
Ref. [castro2016FlutterPanel]_ .
The panel assembly looks like::
skin
_________ _____ _________
| | | |
| | | |
| p01 | p02 | p03 |
| | | |
|_________|_____|_________|
| p04 | p05 | p06 | /\ x
|_________|_____|_________| |
| | | | |
| | | | |
| p07 | p08 | p09 |
| | | |
| | | |
|_________|_____|_________|
loaded edge
base flange
_____ _____
| | | |
| | | |
| p10 | | p11 |
| | | |
|_____| |_____|
| p12 | | p13 |
|_____| |_____|
| | | |
| | | |
| p14 | | p15 |
| | | |
| | | |
|_____| |_____|
loaded edge loaded edge
Parameters
----------
a : float
Total length of the assembly (along `x`).
b : float
Total width of the assembly (along `y`).
ys : float
Position of the stiffener along `y`.
bb : float
Stiffener's base width.
bf : float
Stiffener's flange width.
defect_a : float
Debonding defect/assembly length ratio.
mu : float
Material density.
plyt : float
Ply thickness.
laminaprop : list or tuple
Orthotropic lamina properties: `E_1, E_2, \nu_{12}, G_{12}, G_{13}, G_{23}`.
stack_skin : list or tuple
Stacking sequence for the skin.
stack_base : list or tuple
Stacking sequence for the stiffener's base.
stack_flange : list or tuple
Stacking sequence for the stiffener's flange.
air_speed : float
Airflow speed.
rho_air : float
Air density.
Mach : float
Mach number.
speed_sound : float
Speed of sound.
flow : "x" or "y"
Direction of airflow.
Nxx_skin : float
Skin load distributed at the assembly edge at `x=0`.
Nxx_base : float
Stiffener's base load distributed at the assembly edge at `x=0`.
Nxx_flange : float
Stiffener's flange load distributed at the assembly edge at `x=0`.
run_static_case : bool, optional
If True a static analysis is run before the linear buckling analysis
to compute the real membrane stress state along the domain, otherwise
it is assumed constant values of `N_{xx}` for all components.
r : float or None, optional
Radius of the stiffened panel.
m, n : int, optional
Number of terms of the approximation function for the skin.
mb, nb : int, optional
Number of terms of the approximation function for the stiffener's base.
mf, nf : int, optional
Number of terms of the approximation function for the stiffener's
flange.
Examples
--------
The following example is one of the test cases:
.. literalinclude:: ../../../../../compmech/panel/assembly/tests/test_tstiff2d_assembly.py
:pyobject: test_tstiff2d_1stiff_flutter
"""
defect = defect_a * a
has_defect = True if defect > 0 else False
defect = 0.33*a if defect == 0 else defect # to avoid weird domains
aup = (a - defect)/2.
alow = (a - defect)/2.
bleft = b - ys - bb/2.
bright = ys - bb/2.
mb = m if mb is None else mb
nb = n if nb is None else nb
mf = m if mf is None else mf
nf = n if nf is None else nf
# skin panels
p01 = Panel(group='skin', Nxx=Nxx_skin, x0=alow+defect, y0=ys+bb/2., a=aup, b=bleft, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, rho_air=rho_air, speed_sound=speed_sound, Mach=Mach, V=air_speed, flow=flow)
p02 = Panel(group='skin', Nxx=Nxx_skin, x0=alow+defect, y0=ys-bb/2., a=aup, b=bb, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, rho_air=rho_air, speed_sound=speed_sound, Mach=Mach, V=air_speed, flow=flow)
p03 = Panel(group='skin', Nxx=Nxx_skin, x0=alow+defect, y0=0, a=aup, b=bright, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, rho_air=rho_air, speed_sound=speed_sound, Mach=Mach, V=air_speed, flow=flow)
# defect
p04 = Panel(group='skin', Nxx=Nxx_skin, x0=alow, y0=ys+bb/2., a=defect, b=bleft, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, rho_air=rho_air, speed_sound=speed_sound, Mach=Mach, V=air_speed, flow=flow)
p05 = Panel(group='skin', Nxx=Nxx_skin, x0=alow, y0=ys-bb/2., a=defect, b=bb, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, rho_air=rho_air, speed_sound=speed_sound, Mach=Mach, V=air_speed, flow=flow)
p06 = Panel(group='skin', Nxx=Nxx_skin, x0=alow, y0=0, a=defect, b=bright, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, rho_air=rho_air, speed_sound=speed_sound, Mach=Mach, V=air_speed, flow=flow)
#
p07 = Panel(group='skin', Nxx=Nxx_skin, x0=0, y0=ys+bb/2., a=alow, b=bleft, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, rho_air=rho_air, speed_sound=speed_sound, Mach=Mach, V=air_speed, flow=flow)
p08 = Panel(group='skin', Nxx=Nxx_skin, x0=0, y0=ys-bb/2., a=alow, b=bb, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, rho_air=rho_air, speed_sound=speed_sound, Mach=Mach, V=air_speed, flow=flow)
p09 = Panel(group='skin', Nxx=Nxx_skin, x0=0, y0=0, a=alow, b=bright, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, rho_air=rho_air, speed_sound=speed_sound, Mach=Mach, V=air_speed, flow=flow)
# stiffeners
p10 = Panel(group='base', Nxx=Nxx_base, x0=alow+defect, y0=ys-bb/2., a=aup, b=bb, r=r, m=mb, n=nb, plyt=plyt, stack=stack_base, laminaprop=laminaprop, mu=mu)
p11 = Panel(group='flange', Nxx=Nxx_flange, x0=alow+defect, y0=0, a=aup, b=bf, m=mf, n=nf, plyt=plyt, stack=stack_flange, laminaprop=laminaprop, mu=mu)
# defect
p12 = Panel(group='base', Nxx=Nxx_base, x0=alow, y0=ys-bb/2., a=defect, b=bb, r=r, m=mb, n=nb, plyt=plyt, stack=stack_base, laminaprop=laminaprop, mu=mu)
p13 = Panel(group='flange', Nxx=Nxx_flange, x0=alow, y0=0, a=defect, b=bf, m=mf, n=nf, plyt=plyt, stack=stack_flange, laminaprop=laminaprop, mu=mu)
#
p14 = Panel(group='base', Nxx=Nxx_base, x0=0, y0=ys-bb/2., a=alow, b=bb, r=r, m=mb, n=nb, plyt=plyt, stack=stack_base, laminaprop=laminaprop, mu=mu)
p15 = Panel(group='flange', Nxx=Nxx_flange, x0=0, y0=0, a=alow, b=bf, m=mf, n=nf, plyt=plyt, stack=stack_flange, laminaprop=laminaprop, mu=mu)
# boundary conditions
p01.u1tx = 1 ; p01.u1rx = 1 ; p01.u2tx = 0 ; p01.u2rx = 1
p01.v1tx = 1 ; p01.v1rx = 1 ; p01.v2tx = 0 ; p01.v2rx = 1
p01.w1tx = 1 ; p01.w1rx = 1 ; p01.w2tx = 0 ; p01.w2rx = 1
p01.u1ty = 1 ; p01.u1ry = 1 ; p01.u2ty = 1 ; p01.u2ry = 1
p01.v1ty = 1 ; p01.v1ry = 1 ; p01.v2ty = 0 ; p01.v2ry = 1
p01.w1ty = 1 ; p01.w1ry = 1 ; p01.w2ty = 0 ; p01.w2ry = 1
p02.u1tx = 1 ; p02.u1rx = 1 ; p02.u2tx = 0 ; p02.u2rx = 1
p02.v1tx = 1 ; p02.v1rx = 1 ; p02.v2tx = 0 ; p02.v2rx = 1
p02.w1tx = 1 ; p02.w1rx = 1 ; p02.w2tx = 0 ; p02.w2rx = 1
p02.u1ty = 1 ; p02.u1ry = 1 ; p02.u2ty = 1 ; p02.u2ry = 1
p02.v1ty = 1 ; p02.v1ry = 1 ; p02.v2ty = 1 ; p02.v2ry = 1
p02.w1ty = 1 ; p02.w1ry = 1 ; p02.w2ty = 1 ; p02.w2ry = 1
p03.u1tx = 1 ; p03.u1rx = 1 ; p03.u2tx = 0 ; p03.u2rx = 1
p03.v1tx = 1 ; p03.v1rx = 1 ; p03.v2tx = 0 ; p03.v2rx = 1
p03.w1tx = 1 ; p03.w1rx = 1 ; p03.w2tx = 0 ; p03.w2rx = 1
p03.u1ty = 1 ; p03.u1ry = 1 ; p03.u2ty = 1 ; p03.u2ry = 1
p03.v1ty = 0 ; p03.v1ry = 1 ; p03.v2ty = 1 ; p03.v2ry = 1
p03.w1ty = 0 ; p03.w1ry = 1 ; p03.w2ty = 1 ; p03.w2ry = 1
p04.u1tx = 1 ; p04.u1rx = 1 ; p04.u2tx = 1 ; p04.u2rx = 1
p04.v1tx = 1 ; p04.v1rx = 1 ; p04.v2tx = 1 ; p04.v2rx = 1
p04.w1tx = 1 ; p04.w1rx = 1 ; p04.w2tx = 1 ; p04.w2rx = 1
p04.u1ty = 1 ; p04.u1ry = 1 ; p04.u2ty = 1 ; p04.u2ry = 1
p04.v1ty = 1 ; p04.v1ry = 1 ; p04.v2ty = 0 ; p04.v2ry = 1
p04.w1ty = 1 ; p04.w1ry = 1 ; p04.w2ty = 0 ; p04.w2ry = 1
p05.u1tx = 1 ; p05.u1rx = 1 ; p05.u2tx = 1 ; p05.u2rx = 1
p05.v1tx = 1 ; p05.v1rx = 1 ; p05.v2tx = 1 ; p05.v2rx = 1
p05.w1tx = 1 ; p05.w1rx = 1 ; p05.w2tx = 1 ; p05.w2rx = 1
p05.u1ty = 1 ; p05.u1ry = 1 ; p05.u2ty = 1 ; p05.u2ry = 1
p05.v1ty = 1 ; p05.v1ry = 1 ; p05.v2ty = 1 ; p05.v2ry = 1
p05.w1ty = 1 ; p05.w1ry = 1 ; p05.w2ty = 1 ; p05.w2ry = 1
p06.u1tx = 1 ; p06.u1rx = 1 ; p06.u2tx = 1 ; p06.u2rx = 1
p06.v1tx = 1 ; p06.v1rx = 1 ; p06.v2tx = 1 ; p06.v2rx = 1
p06.w1tx = 1 ; p06.w1rx = 1 ; p06.w2tx = 1 ; p06.w2rx = 1
p06.u1ty = 1 ; p06.u1ry = 1 ; p06.u2ty = 1 ; p06.u2ry = 1
p06.v1ty = 0 ; p06.v1ry = 1 ; p06.v2ty = 1 ; p06.v2ry = 1
p06.w1ty = 0 ; p06.w1ry = 1 ; p06.w2ty = 1 ; p06.w2ry = 1
p07.u1tx = 1 ; p07.u1rx = 1 ; p07.u2tx = 1 ; p07.u2rx = 1
p07.v1tx = 0 ; p07.v1rx = 1 ; p07.v2tx = 1 ; p07.v2rx = 1
p07.w1tx = 0 ; p07.w1rx = 1 ; p07.w2tx = 1 ; p07.w2rx = 1
p07.u1ty = 1 ; p07.u1ry = 1 ; p07.u2ty = 1 ; p07.u2ry = 1
p07.v1ty = 1 ; p07.v1ry = 1 ; p07.v2ty = 0 ; p07.v2ry = 1
p07.w1ty = 1 ; p07.w1ry = 1 ; p07.w2ty = 0 ; p07.w2ry = 1
p08.u1tx = 1 ; p08.u1rx = 1 ; p08.u2tx = 1 ; p08.u2rx = 1
p08.v1tx = 0 ; p08.v1rx = 1 ; p08.v2tx = 1 ; p08.v2rx = 1
p08.w1tx = 0 ; p08.w1rx = 1 ; p08.w2tx = 1 ; p08.w2rx = 1
p08.u1ty = 1 ; p08.u1ry = 1 ; p08.u2ty = 1 ; p08.u2ry = 1
p08.v1ty = 1 ; p08.v1ry = 1 ; p08.v2ty = 1 ; p08.v2ry = 1
p08.w1ty = 1 ; p08.w1ry = 1 ; p08.w2ty = 1 ; p08.w2ry = 1
p09.u1tx = 1 ; p09.u1rx = 1 ; p09.u2tx = 1 ; p09.u2rx = 1
p09.v1tx = 0 ; p09.v1rx = 1 ; p09.v2tx = 1 ; p09.v2rx = 1
p09.w1tx = 0 ; p09.w1rx = 1 ; p09.w2tx = 1 ; p09.w2rx = 1
p09.u1ty = 1 ; p09.u1ry = 1 ; p09.u2ty = 1 ; p09.u2ry = 1
p09.v1ty = 0 ; p09.v1ry = 1 ; p09.v2ty = 1 ; p09.v2ry = 1
p09.w1ty = 0 ; p09.w1ry = 1 ; p09.w2ty = 1 ; p09.w2ry = 1
# base up
p10.u1tx = 1 ; p10.u1rx = 1 ; p10.u2tx = 1 ; p10.u2rx = 1
p10.v1tx = 1 ; p10.v1rx = 1 ; p10.v2tx = 1 ; p10.v2rx = 1
p10.w1tx = 1 ; p10.w1rx = 1 ; p10.w2tx = 1 ; p10.w2rx = 1
p10.u1ty = 1 ; p10.u1ry = 1 ; p10.u2ty = 1 ; p10.u2ry = 1
p10.v1ty = 1 ; p10.v1ry = 1 ; p10.v2ty = 1 ; p10.v2ry = 1
p10.w1ty = 1 ; p10.w1ry = 1 ; p10.w2ty = 1 ; p10.w2ry = 1
# flange up
p11.u1tx = 1 ; p11.u1rx = 1 ; p11.u2tx = 0 ; p11.u2rx = 1
p11.v1tx = 1 ; p11.v1rx = 1 ; p11.v2tx = 0 ; p11.v2rx = 1
p11.w1tx = 1 ; p11.w1rx = 1 ; p11.w2tx = 0 ; p11.w2rx = 1
p11.u1ty = 1 ; p11.u1ry = 1 ; p11.u2ty = 1 ; p11.u2ry = 1
p11.v1ty = 1 ; p11.v1ry = 1 ; p11.v2ty = 1 ; p11.v2ry = 1
p11.w1ty = 1 ; p11.w1ry = 1 ; p11.w2ty = 1 ; p11.w2ry = 1
# base mid
p12.u1tx = 1 ; p12.u1rx = 1 ; p12.u2tx = 1 ; p12.u2rx = 1
p12.v1tx = 1 ; p12.v1rx = 1 ; p12.v2tx = 1 ; p12.v2rx = 1
p12.w1tx = 1 ; p12.w1rx = 1 ; p12.w2tx = 1 ; p12.w2rx = 1
p12.u1ty = 1 ; p12.u1ry = 1 ; p12.u2ty = 1 ; p12.u2ry = 1
p12.v1ty = 1 ; p12.v1ry = 1 ; p12.v2ty = 1 ; p12.v2ry = 1
p12.w1ty = 1 ; p12.w1ry = 1 ; p12.w2ty = 1 ; p12.w2ry = 1
# flange mid
p13.u1tx = 1 ; p13.u1rx = 1 ; p13.u2tx = 1 ; p13.u2rx = 1
p13.v1tx = 1 ; p13.v1rx = 1 ; p13.v2tx = 1 ; p13.v2rx = 1
p13.w1tx = 1 ; p13.w1rx = 1 ; p13.w2tx = 1 ; p13.w2rx = 1
p13.u1ty = 1 ; p13.u1ry = 1 ; p13.u2ty = 1 ; p13.u2ry = 1
p13.v1ty = 1 ; p13.v1ry = 1 ; p13.v2ty = 1 ; p13.v2ry = 1
p13.w1ty = 1 ; p13.w1ry = 1 ; p13.w2ty = 1 ; p13.w2ry = 1
# base low
p14.u1tx = 1 ; p14.u1rx = 1 ; p14.u2tx = 1 ; p14.u2rx = 1
p14.v1tx = 1 ; p14.v1rx = 1 ; p14.v2tx = 1 ; p14.v2rx = 1
p14.w1tx = 1 ; p14.w1rx = 1 ; p14.w2tx = 1 ; p14.w2rx = 1
p14.u1ty = 1 ; p14.u1ry = 1 ; p14.u2ty = 1 ; p14.u2ry = 1
p14.v1ty = 1 ; p14.v1ry = 1 ; p14.v2ty = 1 ; p14.v2ry = 1
p14.w1ty = 1 ; p14.w1ry = 1 ; p14.w2ty = 1 ; p14.w2ry = 1
# flange low
p15.u1tx = 1 ; p15.u1rx = 1 ; p15.u2tx = 1 ; p15.u2rx = 1
p15.v1tx = 0 ; p15.v1rx = 1 ; p15.v2tx = 1 ; p15.v2rx = 1
p15.w1tx = 0 ; p15.w1rx = 1 ; p15.w2tx = 1 ; p15.w2rx = 1
p15.u1ty = 1 ; p15.u1ry = 1 ; p15.u2ty = 1 ; p15.u2ry = 1
p15.v1ty = 1 ; p15.v1ry = 1 ; p15.v2ty = 1 ; p15.v2ry = 1
p15.w1ty = 1 ; p15.w1ry = 1 ; p15.w2ty = 1 ; p15.w2ry = 1
conn = [
# skin-skin
dict(p1=p01, p2=p02, func='SSycte', ycte1=0, ycte2=p02.b),
dict(p1=p01, p2=p04, func='SSxcte', xcte1=0, xcte2=p04.a),
dict(p1=p02, p2=p03, func='SSycte', ycte1=0, ycte2=p03.b),
dict(p1=p02, p2=p05, func='SSxcte', xcte1=0, xcte2=p05.a),
dict(p1=p03, p2=p06, func='SSxcte', xcte1=0, xcte2=p06.a),
dict(p1=p04, p2=p05, func='SSycte', ycte1=0, ycte2=p05.b),
dict(p1=p04, p2=p07, func='SSxcte', xcte1=0, xcte2=p07.a),
dict(p1=p05, p2=p06, func='SSycte', ycte1=0, ycte2=p06.b),
dict(p1=p05, p2=p08, func='SSxcte', xcte1=0, xcte2=p08.a),
dict(p1=p06, p2=p09, func='SSxcte', xcte1=0, xcte2=p09.a),
dict(p1=p07, p2=p08, func='SSycte', ycte1=0, ycte2=p08.b),
dict(p1=p08, p2=p09, func='SSycte', ycte1=0, ycte2=p09.b),
# skin-base
dict(p1=p02, p2=p10, func='SB'),
dict(p1=p05, p2=p12, func='SB', has_defect=has_defect), # defect
dict(p1=p08, p2=p14, func='SB'),
# base-base
dict(p1=p10, p2=p12, func='SSxcte', xcte1=0, xcte2=p12.a),
dict(p1=p12, p2=p14, func='SSxcte', xcte1=0, xcte2=p14.a),
# base-flange
dict(p1=p10, p2=p11, func='BFycte', ycte1=p10.b/2., ycte2=0),
dict(p1=p12, p2=p13, func='BFycte', ycte1=p12.b/2., ycte2=0),
dict(p1=p14, p2=p15, func='BFycte', ycte1=p14.b/2., ycte2=0),
# flange-flange
dict(p1=p11, p2=p13, func='SSxcte', xcte1=0, xcte2=p13.a),
dict(p1=p13, p2=p15, func='SSxcte', xcte1=0, xcte2=p15.a),
]
panels = [p01, p02, p03, p04, p05, p06, p07, p08, p09,
p10, p11, p12, p13, p14, p15]
skin = [p01, p02, p03, p04, p05, p06, p07, p08, p09]
assy = PanelAssembly(panels)
size = assy.get_size()
valid_conn = []
for connecti in conn:
if connecti.get('has_defect'): # connecting if there is no defect
continue
valid_conn.append(connecti)
k0 = assy.calc_k0(valid_conn)
c = None
if (run_static_case and not
(Nxx_skin is None and Nxx_base is None and Nxx_flange is None)):
fext = np.zeros(size)
for p in [p07, p08, p09, p14, p15]:
Nforces = 100
fx = p.Nxx*p.b/(Nforces-1.)
for i in range(Nforces):
y = i*p.b/(Nforces-1.)
if i == 0 or i == (Nforces - 1):
p.add_force(0, y, fx/2., 0, 0)
else:
p.add_force(0, y, fx, 0, 0)
fext[p.col_start: p.col_end] = p.calc_fext(silent=True)
incs, cs = static(k0, -fext, silent=True)
c = cs[0]
kM = assy.calc_kM()
kG = assy.calc_kG0(c=c)
kA = 0
for p in skin:
# TODO the current approach has somewhat hiden settings
# check this strategy:
# - define module aerodynamics
# - function calc_kA inside a module piston_theory
# - pass piston_theory parameters and compute kA
kA += p.calc_kA(size=size, row0=p.row_start, col0=p.col_start, silent=True, finalize=False)
assert np.any(np.isnan(kA.data)) == False
assert np.any(np.isinf(kA.data)) == False
kA = csr_matrix(make_skew_symmetric(kA))
eigvals, eigvecs = freq((k0 + kG + kA), kM, tol=0, sparse_solver=True, silent=True,
sort=True, reduced_dof=False,
num_eigvalues=25, num_eigvalues_print=5)
if run_static_case:
return assy, c, eigvals, eigvecs
else:
return assy, eigvals, eigvecs
def tstiff2d_1stiff_compression(a, b, ys, bb, bf, defect_a, mu, plyt,
laminaprop, stack_skin, stack_base, stack_flange,
Nxx_skin, Nxx_base, Nxx_flange, run_static_case=True,
r=None, m=8, n=8, mb=None, nb=None, mf=None, nf=None,
nx=None, ny=None, nxb=None, nyb=None, nxf=None, nyf=None):
r"""Linear Buckling of T-Stiffened panel with debonding defect
The panel assembly looks like::
skin
_________ _____ _________
| | | |
| | | |
| p01 | p02 | p03 |
| | | |
|_________|_____|_________|
| p04 | p05 | p06 | /\ x
|_________|_____|_________| |
| | | | |
| | | | |
| p07 | p08 | p09 |
| | | |
| | | |
|_________|_____|_________|
loaded edge
base flange
_____ _____
| | | |
| | | |
| p10 | | p11 |
| | | |
|_____| |_____|
| p12 | | p13 |
|_____| |_____|
| | | |
| | | |
| p14 | | p15 |
| | | |
| | | |
|_____| |_____|
loaded edge loaded edge
For more details about the theory involved, see
[castro2017AssemblyModels]_.
Parameters
----------
a : float
Total length of the assembly (along `x`).
b : float
Total width of the assembly (along `y`).
ys : float
Position of the stiffener along `y`.
bb : float
Stiffener's base width.
bf : float
Stiffener's flange width.
defect_a : float
Debonding defect/assembly length ratio.
mu : float
Material density.
plyt : float
Ply thickness.
laminaprop : list or tuple
Orthotropic lamina properties: `E_1, E_2, \nu_{12}, G_{12}, G_{13}, G_{23}`.
stack_skin : list or tuple
Stacking sequence for the skin.
stack_base : list or tuple
Stacking sequence for the stiffener's base.
stack_flange : list or tuple
Stacking sequence for the stiffener's flange.
Nxx_skin : float
Skin load distributed at the assembly edge at `x=0`.
Nxx_base : float
Stiffener's base load distributed at the assembly edge at `x=0`.
Nxx_flange : float
Stiffener's flange load distributed at the assembly edge at `x=0`.
run_static_case : bool, optional
If True a static analysis is run before the linear buckling analysis
to compute the real membrane stress state along the domain, otherwise
it is assumed constant values of `N_{xx}` for all components.
r : float or None, optional
Radius of the stiffened panel.
m, n : int, optional
Number of terms of the approximation function for the skin.
mb, nb : int, optional
Number of terms of the approximation function for the stiffener's base.
mf, nf : int, optional
Number of terms of the approximation function for the stiffener's
flange.
nx, ny, nxb, nyb, nxf, nyf : int, optional
Define of integration points used for skin, stiffener's base or flange;
along x and y. Keeping ``None`` will use the default (see
:class:`.Panel`).
Examples
--------
The following example is one of the test cases:
.. literalinclude:: ../../../../../compmech/panel/assembly/tests/test_tstiff2d_assembly.py
:pyobject: test_tstiff2d_1stiff_compression
"""
defect = defect_a * a
has_defect = True if defect > 0 else False
defect = 0.33*a if defect == 0 else defect # to avoid weird domains
aup = (a - defect)/2.
alow = (a - defect)/2.
bleft = b - ys - bb/2.
bright = ys - bb/2.
mb = m if mb is None else mb
nb = n if nb is None else nb
mf = m if mf is None else mf
nf = n if nf is None else nf
nx = m if nx is None else nx
ny = n if ny is None else ny
nxb = mb if nxb is None else nxb
nyb = nb if nyb is None else nyb
nxf = mf if nxf is None else nxf
nyf = nf if nyf is None else nyf
# skin panels
p01 = Panel(group='skin', Nxx=Nxx_skin, x0=alow+defect, y0=ys+bb/2., a=aup, b=bleft, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, nx=nx, ny=ny)
p02 = Panel(group='skin', Nxx=Nxx_skin, x0=alow+defect, y0=ys-bb/2., a=aup, b=bb, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, nx=nx, ny=ny)
p03 = Panel(group='skin', Nxx=Nxx_skin, x0=alow+defect, y0=0, a=aup, b=bright, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, nx=nx, ny=ny)
# defect
p04 = Panel(group='skin', Nxx=Nxx_skin, x0=alow, y0=ys+bb/2., a=defect, b=bleft, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, nx=nx, ny=ny)
p05 = Panel(group='skin', Nxx=Nxx_skin, x0=alow, y0=ys-bb/2., a=defect, b=bb, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, nx=nx, ny=ny)
p06 = Panel(group='skin', Nxx=Nxx_skin, x0=alow, y0=0, a=defect, b=bright, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, nx=nx, ny=ny)
#
p07 = Panel(group='skin', Nxx=Nxx_skin, x0=0, y0=ys+bb/2., a=alow, b=bleft, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, nx=nx, ny=ny)
p08 = Panel(group='skin', Nxx=Nxx_skin, x0=0, y0=ys-bb/2., a=alow, b=bb, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, nx=nx, ny=ny)
p09 = Panel(group='skin', Nxx=Nxx_skin, x0=0, y0=0, a=alow, b=bright, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu, nx=nx, ny=ny)
# stiffeners
p10 = Panel(group='base', Nxx=Nxx_base, x0=alow+defect, y0=ys-bb/2., a=aup, b=bb, r=r, m=mb, n=nb, plyt=plyt, stack=stack_base, laminaprop=laminaprop, mu=mu, nx=nxb, ny=nyb)
p11 = Panel(group='flange', Nxx=Nxx_flange, x0=alow+defect, y0=0, a=aup, b=bf, m=mf, n=nf, plyt=plyt, stack=stack_flange, laminaprop=laminaprop, mu=mu, nx=nxf, ny=nyf)
# defect
p12 = Panel(group='base', Nxx=Nxx_base, x0=alow, y0=ys-bb/2., a=defect, b=bb, r=r, m=mb, n=nb, plyt=plyt, stack=stack_base, laminaprop=laminaprop, mu=mu, nx=nxb, ny=nyb)
p13 = Panel(group='flange', Nxx=Nxx_flange, x0=alow, y0=0, a=defect, b=bf, m=mf, n=nf, plyt=plyt, stack=stack_flange, laminaprop=laminaprop, mu=mu, nx=nxf, ny=nyf)
#
p14 = Panel(group='base', Nxx=Nxx_base, x0=0, y0=ys-bb/2., a=alow, b=bb, r=r, m=mb, n=nb, plyt=plyt, stack=stack_base, laminaprop=laminaprop, mu=mu, nx=nxb, ny=nyb)
p15 = Panel(group='flange', Nxx=Nxx_flange, x0=0, y0=0, a=alow, b=bf, m=mf, n=nf, plyt=plyt, stack=stack_flange, laminaprop=laminaprop, mu=mu, nx=nxf, ny=nyf)
# boundary conditions
p01.u1tx = 1 ; p01.u1rx = 1 ; p01.u2tx = 0 ; p01.u2rx = 1
p01.v1tx = 1 ; p01.v1rx = 1 ; p01.v2tx = 0 ; p01.v2rx = 1
p01.w1tx = 1 ; p01.w1rx = 1 ; p01.w2tx = 0 ; p01.w2rx = 1
p01.u1ty = 1 ; p01.u1ry = 1 ; p01.u2ty = 1 ; p01.u2ry = 1
p01.v1ty = 1 ; p01.v1ry = 1 ; p01.v2ty = 0 ; p01.v2ry = 1
p01.w1ty = 1 ; p01.w1ry = 1 ; p01.w2ty = 0 ; p01.w2ry = 1
p02.u1tx = 1 ; p02.u1rx = 1 ; p02.u2tx = 0 ; p02.u2rx = 1
p02.v1tx = 1 ; p02.v1rx = 1 ; p02.v2tx = 0 ; p02.v2rx = 1
p02.w1tx = 1 ; p02.w1rx = 1 ; p02.w2tx = 0 ; p02.w2rx = 1
p02.u1ty = 1 ; p02.u1ry = 1 ; p02.u2ty = 1 ; p02.u2ry = 1
p02.v1ty = 1 ; p02.v1ry = 1 ; p02.v2ty = 1 ; p02.v2ry = 1
p02.w1ty = 1 ; p02.w1ry = 1 ; p02.w2ty = 1 ; p02.w2ry = 1
p03.u1tx = 1 ; p03.u1rx = 1 ; p03.u2tx = 0 ; p03.u2rx = 1
p03.v1tx = 1 ; p03.v1rx = 1 ; p03.v2tx = 0 ; p03.v2rx = 1
p03.w1tx = 1 ; p03.w1rx = 1 ; p03.w2tx = 0 ; p03.w2rx = 1
p03.u1ty = 1 ; p03.u1ry = 1 ; p03.u2ty = 1 ; p03.u2ry = 1
p03.v1ty = 0 ; p03.v1ry = 1 ; p03.v2ty = 1 ; p03.v2ry = 1
p03.w1ty = 0 ; p03.w1ry = 1 ; p03.w2ty = 1 ; p03.w2ry = 1
p04.u1tx = 1 ; p04.u1rx = 1 ; p04.u2tx = 1 ; p04.u2rx = 1
p04.v1tx = 1 ; p04.v1rx = 1 ; p04.v2tx = 1 ; p04.v2rx = 1
p04.w1tx = 1 ; p04.w1rx = 1 ; p04.w2tx = 1 ; p04.w2rx = 1
p04.u1ty = 1 ; p04.u1ry = 1 ; p04.u2ty = 1 ; p04.u2ry = 1
p04.v1ty = 1 ; p04.v1ry = 1 ; p04.v2ty = 0 ; p04.v2ry = 1
p04.w1ty = 1 ; p04.w1ry = 1 ; p04.w2ty = 0 ; p04.w2ry = 1
p05.u1tx = 1 ; p05.u1rx = 1 ; p05.u2tx = 1 ; p05.u2rx = 1
p05.v1tx = 1 ; p05.v1rx = 1 ; p05.v2tx = 1 ; p05.v2rx = 1
p05.w1tx = 1 ; p05.w1rx = 1 ; p05.w2tx = 1 ; p05.w2rx = 1
p05.u1ty = 1 ; p05.u1ry = 1 ; p05.u2ty = 1 ; p05.u2ry = 1
p05.v1ty = 1 ; p05.v1ry = 1 ; p05.v2ty = 1 ; p05.v2ry = 1
p05.w1ty = 1 ; p05.w1ry = 1 ; p05.w2ty = 1 ; p05.w2ry = 1
p06.u1tx = 1 ; p06.u1rx = 1 ; p06.u2tx = 1 ; p06.u2rx = 1
p06.v1tx = 1 ; p06.v1rx = 1 ; p06.v2tx = 1 ; p06.v2rx = 1
p06.w1tx = 1 ; p06.w1rx = 1 ; p06.w2tx = 1 ; p06.w2rx = 1
p06.u1ty = 1 ; p06.u1ry = 1 ; p06.u2ty = 1 ; p06.u2ry = 1
p06.v1ty = 0 ; p06.v1ry = 1 ; p06.v2ty = 1 ; p06.v2ry = 1
p06.w1ty = 0 ; p06.w1ry = 1 ; p06.w2ty = 1 ; p06.w2ry = 1
if run_static_case:
p07.u1tx = 1 ; p07.u1rx = 1 ; p07.u2tx = 1 ; p07.u2rx = 1
else:
p07.u1tx = 0 ; p07.u1rx = 1 ; p07.u2tx = 1 ; p07.u2rx = 1
p07.v1tx = 0 ; p07.v1rx = 1 ; p07.v2tx = 1 ; p07.v2rx = 1
p07.w1tx = 0 ; p07.w1rx = 1 ; p07.w2tx = 1 ; p07.w2rx = 1
p07.u1ty = 1 ; p07.u1ry = 1 ; p07.u2ty = 1 ; p07.u2ry = 1
p07.v1ty = 1 ; p07.v1ry = 1 ; p07.v2ty = 0 ; p07.v2ry = 1
p07.w1ty = 1 ; p07.w1ry = 1 ; p07.w2ty = 0 ; p07.w2ry = 1
if run_static_case:
p08.u1tx = 1 ; p08.u1rx = 1 ; p08.u2tx = 1 ; p08.u2rx = 1
else:
p08.u1tx = 0 ; p08.u1rx = 1 ; p08.u2tx = 1 ; p08.u2rx = 1
p08.v1tx = 0 ; p08.v1rx = 1 ; p08.v2tx = 1 ; p08.v2rx = 1
p08.w1tx = 0 ; p08.w1rx = 1 ; p08.w2tx = 1 ; p08.w2rx = 1
p08.u1ty = 1 ; p08.u1ry = 1 ; p08.u2ty = 1 ; p08.u2ry = 1
p08.v1ty = 1 ; p08.v1ry = 1 ; p08.v2ty = 1 ; p08.v2ry = 1
p08.w1ty = 1 ; p08.w1ry = 1 ; p08.w2ty = 1 ; p08.w2ry = 1
if run_static_case:
p09.u1tx = 1 ; p09.u1rx = 1 ; p09.u2tx = 1 ; p09.u2rx = 1
else:
p09.u1tx = 0 ; p09.u1rx = 1 ; p09.u2tx = 1 ; p09.u2rx = 1
p09.v1tx = 0 ; p09.v1rx = 1 ; p09.v2tx = 1 ; p09.v2rx = 1
p09.w1tx = 0 ; p09.w1rx = 1 ; p09.w2tx = 1 ; p09.w2rx = 1
p09.u1ty = 1 ; p09.u1ry = 1 ; p09.u2ty = 1 ; p09.u2ry = 1
p09.v1ty = 0 ; p09.v1ry = 1 ; p09.v2ty = 1 ; p09.v2ry = 1
p09.w1ty = 0 ; p09.w1ry = 1 ; p09.w2ty = 1 ; p09.w2ry = 1
# base up
p10.u1tx = 1 ; p10.u1rx = 1 ; p10.u2tx = 1 ; p10.u2rx = 1
p10.v1tx = 1 ; p10.v1rx = 1 ; p10.v2tx = 1 ; p10.v2rx = 1
p10.w1tx = 1 ; p10.w1rx = 1 ; p10.w2tx = 1 ; p10.w2rx = 1
p10.u1ty = 1 ; p10.u1ry = 1 ; p10.u2ty = 1 ; p10.u2ry = 1
p10.v1ty = 1 ; p10.v1ry = 1 ; p10.v2ty = 1 ; p10.v2ry = 1
p10.w1ty = 1 ; p10.w1ry = 1 ; p10.w2ty = 1 ; p10.w2ry = 1
# flange up
p11.u1tx = 1 ; p11.u1rx = 1 ; p11.u2tx = 0 ; p11.u2rx = 1
p11.v1tx = 1 ; p11.v1rx = 1 ; p11.v2tx = 0 ; p11.v2rx = 1
p11.w1tx = 1 ; p11.w1rx = 1 ; p11.w2tx = 0 ; p11.w2rx = 1
p11.u1ty = 1 ; p11.u1ry = 1 ; p11.u2ty = 1 ; p11.u2ry = 1
p11.v1ty = 1 ; p11.v1ry = 1 ; p11.v2ty = 1 ; p11.v2ry = 1
p11.w1ty = 1 ; p11.w1ry = 1 ; p11.w2ty = 1 ; p11.w2ry = 1
# base mid
p12.u1tx = 1 ; p12.u1rx = 1 ; p12.u2tx = 1 ; p12.u2rx = 1
p12.v1tx = 1 ; p12.v1rx = 1 ; p12.v2tx = 1 ; p12.v2rx = 1
p12.w1tx = 1 ; p12.w1rx = 1 ; p12.w2tx = 1 ; p12.w2rx = 1
p12.u1ty = 1 ; p12.u1ry = 1 ; p12.u2ty = 1 ; p12.u2ry = 1
p12.v1ty = 1 ; p12.v1ry = 1 ; p12.v2ty = 1 ; p12.v2ry = 1
p12.w1ty = 1 ; p12.w1ry = 1 ; p12.w2ty = 1 ; p12.w2ry = 1
# flange mid
p13.u1tx = 1 ; p13.u1rx = 1 ; p13.u2tx = 1 ; p13.u2rx = 1
p13.v1tx = 1 ; p13.v1rx = 1 ; p13.v2tx = 1 ; p13.v2rx = 1
p13.w1tx = 1 ; p13.w1rx = 1 ; p13.w2tx = 1 ; p13.w2rx = 1
p13.u1ty = 1 ; p13.u1ry = 1 ; p13.u2ty = 1 ; p13.u2ry = 1
p13.v1ty = 1 ; p13.v1ry = 1 ; p13.v2ty = 1 ; p13.v2ry = 1
p13.w1ty = 1 ; p13.w1ry = 1 ; p13.w2ty = 1 ; p13.w2ry = 1
# base low
p14.u1tx = 1 ; p14.u1rx = 1 ; p14.u2tx = 1 ; p14.u2rx = 1
p14.v1tx = 1 ; p14.v1rx = 1 ; p14.v2tx = 1 ; p14.v2rx = 1
p14.w1tx = 1 ; p14.w1rx = 1 ; p14.w2tx = 1 ; p14.w2rx = 1
p14.u1ty = 1 ; p14.u1ry = 1 ; p14.u2ty = 1 ; p14.u2ry = 1
p14.v1ty = 1 ; p14.v1ry = 1 ; p14.v2ty = 1 ; p14.v2ry = 1
p14.w1ty = 1 ; p14.w1ry = 1 ; p14.w2ty = 1 ; p14.w2ry = 1
# flange low
if run_static_case:
p15.u1tx = 1 ; p15.u1rx = 1 ; p15.u2tx = 1 ; p15.u2rx = 1
else:
p15.u1tx = 0 ; p15.u1rx = 1 ; p15.u2tx = 1 ; p15.u2rx = 1
p15.v1tx = 0 ; p15.v1rx = 1 ; p15.v2tx = 1 ; p15.v2rx = 1
p15.w1tx = 0 ; p15.w1rx = 1 ; p15.w2tx = 1 ; p15.w2rx = 1
p15.u1ty = 1 ; p15.u1ry = 1 ; p15.u2ty = 1 ; p15.u2ry = 1
p15.v1ty = 1 ; p15.v1ry = 1 ; p15.v2ty = 1 ; p15.v2ry = 1
p15.w1ty = 1 ; p15.w1ry = 1 ; p15.w2ty = 1 ; p15.w2ry = 1
conn = [
# skin-skin
dict(p1=p01, p2=p02, func='SSycte', ycte1=0, ycte2=p02.b),
dict(p1=p01, p2=p04, func='SSxcte', xcte1=0, xcte2=p04.a),
dict(p1=p02, p2=p03, func='SSycte', ycte1=0, ycte2=p03.b),
dict(p1=p02, p2=p05, func='SSxcte', xcte1=0, xcte2=p05.a),
dict(p1=p03, p2=p06, func='SSxcte', xcte1=0, xcte2=p06.a),
dict(p1=p04, p2=p05, func='SSycte', ycte1=0, ycte2=p05.b),
dict(p1=p04, p2=p07, func='SSxcte', xcte1=0, xcte2=p07.a),
dict(p1=p05, p2=p06, func='SSycte', ycte1=0, ycte2=p06.b),
dict(p1=p05, p2=p08, func='SSxcte', xcte1=0, xcte2=p08.a),
dict(p1=p06, p2=p09, func='SSxcte', xcte1=0, xcte2=p09.a),
dict(p1=p07, p2=p08, func='SSycte', ycte1=0, ycte2=p08.b),
dict(p1=p08, p2=p09, func='SSycte', ycte1=0, ycte2=p09.b),
# skin-base
dict(p1=p02, p2=p10, func='SB'),
dict(p1=p05, p2=p12, func='SB', has_defect=has_defect), # defect
dict(p1=p08, p2=p14, func='SB'),
# base-base
dict(p1=p10, p2=p12, func='SSxcte', xcte1=0, xcte2=p12.a),
dict(p1=p12, p2=p14, func='SSxcte', xcte1=0, xcte2=p14.a),
# base-flange
dict(p1=p10, p2=p11, func='BFycte', ycte1=p10.b/2., ycte2=0),
dict(p1=p12, p2=p13, func='BFycte', ycte1=p12.b/2., ycte2=0),
dict(p1=p14, p2=p15, func='BFycte', ycte1=p14.b/2., ycte2=0),
# flange-flange
dict(p1=p11, p2=p13, func='SSxcte', xcte1=0, xcte2=p13.a),
dict(p1=p13, p2=p15, func='SSxcte', xcte1=0, xcte2=p15.a),
]
panels = [p01, p02, p03, p04, p05, p06, p07, p08, p09,
p10, p11, p12, p13, p14, p15]
assy = PanelAssembly(panels)
size = sum([3*p.m*p.n for p in panels])
valid_conn = []
for connecti in conn:
if connecti.get('has_defect'): # connecting if there is no defect
continue
valid_conn.append(connecti)
k0 = assy.calc_k0(valid_conn)
c = None
if run_static_case:
fext = np.zeros(size)
for p in [p07, p08, p09, p14, p15]:
Nforces = 100
fx = p.Nxx*p.b/(Nforces-1.)
for i in range(Nforces):
y = i*p.b/(Nforces-1.)
if i == 0 or i == (Nforces - 1):
p.add_force(0, y, fx/2., 0, 0)
else:
p.add_force(0, y, fx, 0, 0)
fext[p.col_start: p.col_end] = p.calc_fext(silent=True)
incs, cs = static(k0, -fext, silent=True)
c = cs[0]
kG = assy.calc_kG0(c=c)
eigvals = eigvecs = None
eigvals, eigvecs = lb(k0, kG, tol=0, sparse_solver=True, silent=True,
num_eigvalues=25, num_eigvalues_print=5)
if run_static_case:
return assy, c, eigvals, eigvecs
else:
return assy, eigvals, eigvecs
def test_4panels_kt_kr():
"""Compare result of 4 assembled panels with single-domain results
The panel assembly looks like::
_________ _____
| | |
| | |
| p01 | p02 |
| | |
|_________|_____|
| p03 | p04 |
| | |
| | |
| | |
| | |
| | |
|_________|_____|
"""
print('Testing validity of the default kt and kr values')
plyt = 1.e-3 * 0.125
laminaprop = (142.5e9, 8.7e9, 0.28, 5.1e9, 5.1e9, 5.1e9)
stack = [0, 45, -45, 90, -45, 45, 0]
lam = laminate.read_stack(stack=stack, plyt=plyt, laminaprop=laminaprop)
mu = 1.3e3
r = 10.
m = 8
n = 8
a1 = 1.5
a2 = 1.5
a3 = 2.5
a4 = 2.5
b1 = 1.5
b2 = 0.5
b3 = 1.5
b4 = 0.5
A11 = lam.ABD[0, 0]
A22 = lam.ABD[1, 1]
D11 = lam.ABD[3, 3]
D22 = lam.ABD[4, 4]
p01 = Panel(group='panels',
x0=a3,
y0=b2,
a=a1,
b=b1,
r=r,
m=m,
n=n,
plyt=plyt,
stack=stack,
laminaprop=laminaprop,
mu=mu)
p02 = Panel(group='panels',
x0=a3,
y0=0,
a=a2,
b=b2,
r=r,
m=m,
n=n,
plyt=plyt,
stack=stack,
laminaprop=laminaprop,
mu=mu)
p03 = Panel(group='panels',
x0=0,
y0=b2,
a=a3,
b=b3,
r=r,
m=m,
n=n,
plyt=plyt,
stack=stack,
laminaprop=laminaprop,
mu=mu)
p04 = Panel(group='panels',
x0=0,
y0=0,
a=a4,
b=b4,
r=r,
m=m,
n=n,
plyt=plyt,
stack=stack,
laminaprop=laminaprop,
mu=mu)
kt13, kr13 = connections.calc_kt_kr(p01, p03, 'xcte')
kt24, kr24 = connections.calc_kt_kr(p02, p04, 'xcte')
kt12, kr12 = connections.calc_kt_kr(p01, p02, 'ycte')
kt34, kr34 = connections.calc_kt_kr(p03, p04, 'ycte')
# boundary conditions
p01.u1tx = 1
p01.u1rx = 1
p01.u2tx = 0
p01.u2rx = 1
p01.v1tx = 1
p01.v1rx = 1
p01.v2tx = 0
p01.v2rx = 1
p01.w1tx = 1
p01.w1rx = 1
p01.w2tx = 0
p01.w2rx = 1
p01.u1ty = 1
p01.u1ry = 1
p01.u2ty = 0
p01.u2ry = 1
p01.v1ty = 1
p01.v1ry = 1
p01.v2ty = 0
p01.v2ry = 1
p01.w1ty = 1
p01.w1ry = 1
p01.w2ty = 0
p01.w2ry = 1
p02.u1tx = 1
p02.u1rx = 1
p02.u2tx = 0
p02.u2rx = 1
p02.v1tx = 1
p02.v1rx = 1
p02.v2tx = 0
p02.v2rx = 1
p02.w1tx = 1
p02.w1rx = 1
p02.w2tx = 0
p02.w2rx = 1
p02.u1ty = 0
p02.u1ry = 1
p02.u2ty = 1
p02.u2ry = 1
p02.v1ty = 0
p02.v1ry = 1
p02.v2ty = 1
p02.v2ry = 1
p02.w1ty = 0
p02.w1ry = 1
p02.w2ty = 1
p02.w2ry = 1
p03.u1tx = 0
p03.u1rx = 1
p03.u2tx = 1
p03.u2rx = 1
p03.v1tx = 0
p03.v1rx = 1
p03.v2tx = 1
p03.v2rx = 1
p03.w1tx = 0
p03.w1rx = 1
p03.w2tx = 1
p03.w2rx = 1
p03.u1ty = 1
p03.u1ry = 1
p03.u2ty = 0
p03.u2ry = 1
p03.v1ty = 1
p03.v1ry = 1
p03.v2ty = 0
p03.v2ry = 1
p03.w1ty = 1
p03.w1ry = 1
p03.w2ty = 0
p03.w2ry = 1
p04.u1tx = 0
p04.u1rx = 1
p04.u2tx = 1
p04.u2rx = 1
p04.v1tx = 0
p04.v1rx = 1
p04.v2tx = 1
p04.v2rx = 1
p04.w1tx = 0
p04.w1rx = 1
p04.w2tx = 1
p04.w2rx = 1
p04.u1ty = 0
p04.u1ry = 1
p04.u2ty = 1
p04.u2ry = 1
p04.v1ty = 0
p04.v1ry = 1
p04.v2ty = 1
p04.v2ry = 1
p04.w1ty = 0
p04.w1ry = 1
p04.w2ty = 1
p04.w2ry = 1
conndict = [
dict(p1=p01,
p2=p02,
func='SSycte',
ycte1=0,
ycte2=p02.b,
kt=kt12,
kr=kr12),
dict(p1=p01,
p2=p03,
func='SSxcte',
xcte1=0,
xcte2=p03.a,
kt=kt13,
kr=kr13),
dict(p1=p02,
p2=p04,
func='SSxcte',
xcte1=0,
xcte2=p04.a,
kt=kt24,
kr=kr24),
dict(p1=p03,
p2=p04,
func='SSycte',
ycte1=0,
ycte2=p04.b,
kt=kt34,
kr=kr34),
]
panels = [p01, p02, p03, p04]
size = sum([3 * p.m * p.n for p in panels])
k0 = 0
kM = 0
row0 = 0
col0 = 0
for p in panels:
k0 += p.calc_k0(row0=row0,
col0=col0,
size=size,
silent=True,
finalize=False)
kM += p.calc_kM(row0=row0,
col0=col0,
size=size,
silent=True,
finalize=False)
p.row_start = row0
p.col_start = col0
row0 += 3 * p.m * p.n
col0 += 3 * p.m * p.n
p.row_end = row0
p.col_end = col0
for conn in conndict:
if conn.get('has_deffect'): # connecting if there is no deffect
continue
p1 = conn['p1']
p2 = conn['p2']
if conn['func'] == 'SSycte':
k0 += connections.kCSSycte.fkCSSycte11(conn['kt'],
conn['kr'],
p1,
conn['ycte1'],
size,
p1.row_start,
col0=p1.col_start)
k0 += connections.kCSSycte.fkCSSycte12(conn['kt'],
conn['kr'],
p1,
p2,
conn['ycte1'],
conn['ycte2'],
size,
p1.row_start,
col0=p2.col_start)
k0 += connections.kCSSycte.fkCSSycte22(conn['kt'],
conn['kr'],
p1,
p2,
conn['ycte2'],
size,
p2.row_start,
col0=p2.col_start)
elif conn['func'] == 'SSxcte':
k0 += connections.kCSSxcte.fkCSSxcte11(conn['kt'],
conn['kr'],
p1,
conn['xcte1'],
size,
p1.row_start,
col0=p1.col_start)
k0 += connections.kCSSxcte.fkCSSxcte12(conn['kt'],
conn['kr'],
p1,
p2,
conn['xcte1'],
conn['xcte2'],
size,
p1.row_start,
col0=p2.col_start)
k0 += connections.kCSSxcte.fkCSSxcte22(conn['kt'],
conn['kr'],
p1,
p2,
conn['xcte2'],
size,
p2.row_start,
col0=p2.col_start)
assert np.any(np.isnan(k0.data)) == False
assert np.any(np.isinf(k0.data)) == False
k0 = csr_matrix(make_symmetric(k0))
assert np.any(np.isnan(kM.data)) == False
assert np.any(np.isinf(kM.data)) == False
kM = csr_matrix(make_symmetric(kM))
eigvals, eigvecs = freq(k0,
kM,
tol=0,
sparse_solver=True,
silent=True,
sort=True,
reduced_dof=False,
num_eigvalues=25,
num_eigvalues_print=5)
# Results for single panel
m = 15
n = 15
singlepanel = Panel(a=(a1 + a3),
b=(b1 + b2),
r=r,
m=m,
n=n,
plyt=plyt,
stack=stack,
laminaprop=laminaprop,
mu=mu)
singlepanel.freq(silent=True)
assert np.isclose(eigvals[0], singlepanel.eigvals[0], atol=0.01, rtol=0.01)
def tstiff2d_1stiff_freq(a, b, ys, bb, bf, defect_a, mu, plyt, laminaprop,
stack_skin, stack_base, stack_flange,
r=None, m=8, n=8, mb=None, nb=None, mf=None, nf=None):
r"""Frequency T-Stiffened Panel with possible defect at middle
For more details about each parameter and the aerodynamic formulation see
Ref. [castro2016FlutterPanel]_ .
For more details about the theory involved on the assembly of panels, see
[castro2017AssemblyModels]_.
The panel assembly looks like::
skin
_________ _____ _________
| | | |
| | | |
| p01 | p02 | p03 |
| | | |
|_________|_____|_________|
| p04 | p05 | p06 |
|_________|_____|_________|
| | | |
| | | |
| p07 | p08 | p09 |
| | | |
| | | |
|_________|_____|_________|
base flange
_____ _____
| | | |
| | | |
| p10 | | p11 |
| | | |
|_____| |_____|
| p12 | | p13 |
|_____| |_____|
| | | |
| | | |
| p14 | | p15 |
| | | |
| | | |
|_____| |_____|
Parameters
----------
a : float
Total length of the assembly (along `x`).
b : float
Total width of the assembly (along `y`).
ys : float
Position of the stiffener along `y`.
bb : float
Stiffener's base width.
bf : float
Stiffener's flange width.
defect_a : float
Debonding defect/assembly length ratio.
mu : float
Material density.
plyt : float
Ply thickness.
laminaprop : list or tuple
Orthotropic lamina properties: `E_1, E_2, \nu_{12}, G_{12}, G_{13}, G_{23}`.
stack_skin : list or tuple
Stacking sequence for the skin.
stack_base : list or tuple
Stacking sequence for the stiffener's base.
stack_flange : list or tuple
Stacking sequence for the stiffener's flange.
r : float or None, optional
Radius of the stiffened panel.
m, n : int, optional
Number of terms of the approximation function for the skin.
mb, nb : int, optional
Number of terms of the approximation function for the stiffener's base.
mf, nf : int, optional
Number of terms of the approximation function for the stiffener's
flange.
Examples
--------
The following example is one of the test cases:
.. literalinclude:: ../../../../../compmech/panel/assembly/tests/test_tstiff2d_assembly.py
:pyobject: test_tstiff2d_1stiff_freq
"""
defect = defect_a * a
has_defect = True if defect > 0 else False
defect = 0.33*a if defect == 0 else defect # to avoid weird domains
aup = (a - defect)/2.
alow = (a - defect)/2.
bleft = b - ys - bb/2.
bright = ys - bb/2.
mb = m if mb is None else mb
nb = n if nb is None else nb
mf = m if mf is None else mf
nf = n if nf is None else nf
# skin panels
p01 = Panel(group='skin', x0=alow+defect, y0=ys+bb/2., a=aup, b=bleft, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu)
p02 = Panel(group='skin', x0=alow+defect, y0=ys-bb/2., a=aup, b=bb, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu)
p03 = Panel(group='skin', x0=alow+defect, y0=0, a=aup, b=bright, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu)
# defect
p04 = Panel(group='skin', x0=alow, y0=ys+bb/2., a=defect, b=bleft, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu)
p05 = Panel(group='skin', x0=alow, y0=ys-bb/2., a=defect, b=bb, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu)
p06 = Panel(group='skin', x0=alow, y0=0, a=defect, b=bright, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu)
#
p07 = Panel(group='skin', x0=0, y0=ys+bb/2., a=alow, b=bleft, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu)
p08 = Panel(group='skin', x0=0, y0=ys-bb/2., a=alow, b=bb, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu)
p09 = Panel(group='skin', x0=0, y0=0, a=alow, b=bright, r=r, m=m, n=n, plyt=plyt, stack=stack_skin, laminaprop=laminaprop, mu=mu)
# stiffeners
p10 = Panel(group='base', x0=alow+defect, y0=ys-bb/2., a=aup, b=bb, r=r, m=mb, n=nb, plyt=plyt, stack=stack_base, laminaprop=laminaprop, mu=mu)
p11 = Panel(group='flange', x0=alow+defect, y0=0, a=aup, b=bf, m=mf, n=nf, plyt=plyt, stack=stack_flange, laminaprop=laminaprop, mu=mu)
# defect
p12 = Panel(group='base', x0=alow, y0=ys-bb/2., a=defect, b=bb, r=r, m=mb, n=nb, plyt=plyt, stack=stack_base, laminaprop=laminaprop, mu=mu)
p13 = Panel(group='flange', x0=alow, y0=0, a=defect, b=bf, m=mf, n=nf, plyt=plyt, stack=stack_flange, laminaprop=laminaprop, mu=mu)
#
p14 = Panel(group='base', x0=0, y0=ys-bb/2., a=alow, b=bb, r=r, m=mb, n=nb, plyt=plyt, stack=stack_base, laminaprop=laminaprop, mu=mu)
p15 = Panel(group='flange', x0=0, y0=0, a=alow, b=bf, m=mf, n=nf, plyt=plyt, stack=stack_flange, laminaprop=laminaprop, mu=mu)
# boundary conditions
p01.u1tx = 1 ; p01.u1rx = 1 ; p01.u2tx = 0 ; p01.u2rx = 1
p01.v1tx = 1 ; p01.v1rx = 1 ; p01.v2tx = 0 ; p01.v2rx = 1
p01.w1tx = 1 ; p01.w1rx = 1 ; p01.w2tx = 0 ; p01.w2rx = 1
p01.u1ty = 1 ; p01.u1ry = 1 ; p01.u2ty = 0 ; p01.u2ry = 1
p01.v1ty = 1 ; p01.v1ry = 1 ; p01.v2ty = 0 ; p01.v2ry = 1
p01.w1ty = 1 ; p01.w1ry = 1 ; p01.w2ty = 0 ; p01.w2ry = 1
p02.u1tx = 1 ; p02.u1rx = 1 ; p02.u2tx = 0 ; p02.u2rx = 1
p02.v1tx = 1 ; p02.v1rx = 1 ; p02.v2tx = 0 ; p02.v2rx = 1
p02.w1tx = 1 ; p02.w1rx = 1 ; p02.w2tx = 0 ; p02.w2rx = 1
p02.u1ty = 1 ; p02.u1ry = 1 ; p02.u2ty = 1 ; p02.u2ry = 1
p02.v1ty = 1 ; p02.v1ry = 1 ; p02.v2ty = 1 ; p02.v2ry = 1
p02.w1ty = 1 ; p02.w1ry = 1 ; p02.w2ty = 1 ; p02.w2ry = 1
p03.u1tx = 1 ; p03.u1rx = 1 ; p03.u2tx = 0 ; p03.u2rx = 1
p03.v1tx = 1 ; p03.v1rx = 1 ; p03.v2tx = 0 ; p03.v2rx = 1
p03.w1tx = 1 ; p03.w1rx = 1 ; p03.w2tx = 0 ; p03.w2rx = 1
p03.u1ty = 0 ; p03.u1ry = 1 ; p03.u2ty = 1 ; p03.u2ry = 1
p03.v1ty = 0 ; p03.v1ry = 1 ; p03.v2ty = 1 ; p03.v2ry = 1
p03.w1ty = 0 ; p03.w1ry = 1 ; p03.w2ty = 1 ; p03.w2ry = 1
p04.u1tx = 1 ; p04.u1rx = 1 ; p04.u2tx = 1 ; p04.u2rx = 1
p04.v1tx = 1 ; p04.v1rx = 1 ; p04.v2tx = 1 ; p04.v2rx = 1
p04.w1tx = 1 ; p04.w1rx = 1 ; p04.w2tx = 1 ; p04.w2rx = 1
p04.u1ty = 1 ; p04.u1ry = 1 ; p04.u2ty = 0 ; p04.u2ry = 1
p04.v1ty = 1 ; p04.v1ry = 1 ; p04.v2ty = 0 ; p04.v2ry = 1
p04.w1ty = 1 ; p04.w1ry = 1 ; p04.w2ty = 0 ; p04.w2ry = 1
p05.u1tx = 1 ; p05.u1rx = 1 ; p05.u2tx = 1 ; p05.u2rx = 1
p05.v1tx = 1 ; p05.v1rx = 1 ; p05.v2tx = 1 ; p05.v2rx = 1
p05.w1tx = 1 ; p05.w1rx = 1 ; p05.w2tx = 1 ; p05.w2rx = 1
p05.u1ty = 1 ; p05.u1ry = 1 ; p05.u2ty = 1 ; p05.u2ry = 1
p05.v1ty = 1 ; p05.v1ry = 1 ; p05.v2ty = 1 ; p05.v2ry = 1
p05.w1ty = 1 ; p05.w1ry = 1 ; p05.w2ty = 1 ; p05.w2ry = 1
p06.u1tx = 1 ; p06.u1rx = 1 ; p06.u2tx = 1 ; p06.u2rx = 1
p06.v1tx = 1 ; p06.v1rx = 1 ; p06.v2tx = 1 ; p06.v2rx = 1
p06.w1tx = 1 ; p06.w1rx = 1 ; p06.w2tx = 1 ; p06.w2rx = 1
p06.u1ty = 0 ; p06.u1ry = 1 ; p06.u2ty = 1 ; p06.u2ry = 1
p06.v1ty = 0 ; p06.v1ry = 1 ; p06.v2ty = 1 ; p06.v2ry = 1
p06.w1ty = 0 ; p06.w1ry = 1 ; p06.w2ty = 1 ; p06.w2ry = 1
p07.u1tx = 0 ; p07.u1rx = 1 ; p07.u2tx = 1 ; p07.u2rx = 1
p07.v1tx = 0 ; p07.v1rx = 1 ; p07.v2tx = 1 ; p07.v2rx = 1
p07.w1tx = 0 ; p07.w1rx = 1 ; p07.w2tx = 1 ; p07.w2rx = 1
p07.u1ty = 1 ; p07.u1ry = 1 ; p07.u2ty = 0 ; p07.u2ry = 1
p07.v1ty = 1 ; p07.v1ry = 1 ; p07.v2ty = 0 ; p07.v2ry = 1
p07.w1ty = 1 ; p07.w1ry = 1 ; p07.w2ty = 0 ; p07.w2ry = 1
p08.u1tx = 0 ; p08.u1rx = 1 ; p08.u2tx = 1 ; p08.u2rx = 1
p08.v1tx = 0 ; p08.v1rx = 1 ; p08.v2tx = 1 ; p08.v2rx = 1
p08.w1tx = 0 ; p08.w1rx = 1 ; p08.w2tx = 1 ; p08.w2rx = 1
p08.u1ty = 1 ; p08.u1ry = 1 ; p08.u2ty = 1 ; p08.u2ry = 1
p08.v1ty = 1 ; p08.v1ry = 1 ; p08.v2ty = 1 ; p08.v2ry = 1
p08.w1ty = 1 ; p08.w1ry = 1 ; p08.w2ty = 1 ; p08.w2ry = 1
p09.u1tx = 0 ; p09.u1rx = 1 ; p09.u2tx = 1 ; p09.u2rx = 1
p09.v1tx = 0 ; p09.v1rx = 1 ; p09.v2tx = 1 ; p09.v2rx = 1
p09.w1tx = 0 ; p09.w1rx = 1 ; p09.w2tx = 1 ; p09.w2rx = 1
p09.u1ty = 0 ; p09.u1ry = 1 ; p09.u2ty = 1 ; p09.u2ry = 1
p09.v1ty = 0 ; p09.v1ry = 1 ; p09.v2ty = 1 ; p09.v2ry = 1
p09.w1ty = 0 ; p09.w1ry = 1 ; p09.w2ty = 1 ; p09.w2ry = 1
# base up
p10.u1tx = 1 ; p10.u1rx = 1 ; p10.u2tx = 1 ; p10.u2rx = 1
p10.v1tx = 1 ; p10.v1rx = 1 ; p10.v2tx = 1 ; p10.v2rx = 1
p10.w1tx = 1 ; p10.w1rx = 1 ; p10.w2tx = 1 ; p10.w2rx = 1
p10.u1ty = 1 ; p10.u1ry = 1 ; p10.u2ty = 1 ; p10.u2ry = 1
p10.v1ty = 1 ; p10.v1ry = 1 ; p10.v2ty = 1 ; p10.v2ry = 1
p10.w1ty = 1 ; p10.w1ry = 1 ; p10.w2ty = 1 ; p10.w2ry = 1
# flange up
p11.u1tx = 1 ; p11.u1rx = 1 ; p11.u2tx = 0 ; p11.u2rx = 1
p11.v1tx = 1 ; p11.v1rx = 1 ; p11.v2tx = 0 ; p11.v2rx = 1
p11.w1tx = 1 ; p11.w1rx = 1 ; p11.w2tx = 0 ; p11.w2rx = 1
p11.u1ty = 1 ; p11.u1ry = 1 ; p11.u2ty = 1 ; p11.u2ry = 1
p11.v1ty = 1 ; p11.v1ry = 1 ; p11.v2ty = 1 ; p11.v2ry = 1
p11.w1ty = 1 ; p11.w1ry = 1 ; p11.w2ty = 1 ; p11.w2ry = 1
# base mid
p12.u1tx = 1 ; p12.u1rx = 1 ; p12.u2tx = 1 ; p12.u2rx = 1
p12.v1tx = 1 ; p12.v1rx = 1 ; p12.v2tx = 1 ; p12.v2rx = 1
p12.w1tx = 1 ; p12.w1rx = 1 ; p12.w2tx = 1 ; p12.w2rx = 1
p12.u1ty = 1 ; p12.u1ry = 1 ; p12.u2ty = 1 ; p12.u2ry = 1
p12.v1ty = 1 ; p12.v1ry = 1 ; p12.v2ty = 1 ; p12.v2ry = 1
p12.w1ty = 1 ; p12.w1ry = 1 ; p12.w2ty = 1 ; p12.w2ry = 1
# flange mid
p13.u1tx = 1 ; p13.u1rx = 1 ; p13.u2tx = 1 ; p13.u2rx = 1
p13.v1tx = 1 ; p13.v1rx = 1 ; p13.v2tx = 1 ; p13.v2rx = 1
p13.w1tx = 1 ; p13.w1rx = 1 ; p13.w2tx = 1 ; p13.w2rx = 1
p13.u1ty = 1 ; p13.u1ry = 1 ; p13.u2ty = 1 ; p13.u2ry = 1
p13.v1ty = 1 ; p13.v1ry = 1 ; p13.v2ty = 1 ; p13.v2ry = 1
p13.w1ty = 1 ; p13.w1ry = 1 ; p13.w2ty = 1 ; p13.w2ry = 1
# base low
p14.u1tx = 1 ; p14.u1rx = 1 ; p14.u2tx = 1 ; p14.u2rx = 1
p14.v1tx = 1 ; p14.v1rx = 1 ; p14.v2tx = 1 ; p14.v2rx = 1
p14.w1tx = 1 ; p14.w1rx = 1 ; p14.w2tx = 1 ; p14.w2rx = 1
p14.u1ty = 1 ; p14.u1ry = 1 ; p14.u2ty = 1 ; p14.u2ry = 1
p14.v1ty = 1 ; p14.v1ry = 1 ; p14.v2ty = 1 ; p14.v2ry = 1
p14.w1ty = 1 ; p14.w1ry = 1 ; p14.w2ty = 1 ; p14.w2ry = 1
# flange low
p15.u1tx = 0 ; p15.u1rx = 1 ; p15.u2tx = 1 ; p15.u2rx = 1
p15.v1tx = 0 ; p15.v1rx = 1 ; p15.v2tx = 1 ; p15.v2rx = 1
p15.w1tx = 0 ; p15.w1rx = 1 ; p15.w2tx = 1 ; p15.w2rx = 1
p15.u1ty = 1 ; p15.u1ry = 1 ; p15.u2ty = 1 ; p15.u2ry = 1
p15.v1ty = 1 ; p15.v1ry = 1 ; p15.v2ty = 1 ; p15.v2ry = 1
p15.w1ty = 1 ; p15.w1ry = 1 ; p15.w2ty = 1 ; p15.w2ry = 1
conn = [
# skin-skin
dict(p1=p01, p2=p02, func='SSycte', ycte1=0, ycte2=p02.b),
dict(p1=p01, p2=p04, func='SSxcte', xcte1=0, xcte2=p04.a),
dict(p1=p02, p2=p03, func='SSycte', ycte1=0, ycte2=p03.b),
dict(p1=p02, p2=p05, func='SSxcte', xcte1=0, xcte2=p05.a),
dict(p1=p03, p2=p06, func='SSxcte', xcte1=0, xcte2=p06.a),
dict(p1=p04, p2=p05, func='SSycte', ycte1=0, ycte2=p05.b),
dict(p1=p04, p2=p07, func='SSxcte', xcte1=0, xcte2=p07.a),
dict(p1=p05, p2=p06, func='SSycte', ycte1=0, ycte2=p06.b),
dict(p1=p05, p2=p08, func='SSxcte', xcte1=0, xcte2=p08.a),
dict(p1=p06, p2=p09, func='SSxcte', xcte1=0, xcte2=p09.a),
dict(p1=p07, p2=p08, func='SSycte', ycte1=0, ycte2=p08.b),
dict(p1=p08, p2=p09, func='SSycte', ycte1=0, ycte2=p09.b),
# skin-base
dict(p1=p02, p2=p10, func='SB'),
dict(p1=p05, p2=p12, func='SB', has_defect=has_defect), # defect
dict(p1=p08, p2=p14, func='SB'),
# base-base
dict(p1=p10, p2=p12, func='SSxcte', xcte1=0, xcte2=p12.a),
dict(p1=p12, p2=p14, func='SSxcte', xcte1=0, xcte2=p14.a),
# base-flange
dict(p1=p10, p2=p11, func='BFycte', ycte1=p10.b/2., ycte2=0),
dict(p1=p12, p2=p13, func='BFycte', ycte1=p12.b/2., ycte2=0),
dict(p1=p14, p2=p15, func='BFycte', ycte1=p14.b/2., ycte2=0),
# flange-flange
dict(p1=p11, p2=p13, func='SSxcte', xcte1=0, xcte2=p13.a),
dict(p1=p13, p2=p15, func='SSxcte', xcte1=0, xcte2=p15.a),
]
panels = [p01, p02, p03, p04, p05, p06, p07, p08, p09,
p10, p11, p12, p13, p14, p15]
skin = [p01, p02, p03, p04, p05, p06, p07, p08, p09]
base = [p10, p12, p14]
flange = [p11, p13, p15]
assy = PanelAssembly(panels)
size = assy.get_size()
valid_conn = []
for connecti in conn:
if connecti.get('has_defect'):
continue
valid_conn.append(connecti)
k0 = assy.calc_k0(conn=valid_conn)
kM = assy.calc_kM()
eigvals, eigvecs = freq(k0, kM, tol=0, sparse_solver=True, silent=True,
sort=True, reduced_dof=False,
num_eigvalues=25, num_eigvalues_print=5)
return assy, eigvals, eigvecs
