def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig("DVTA-CT-6", "T008.ini", "C001.ini", developmentrig, True) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
rac4 = ctr1.plugin[4]
# ss = rig.devices['SPIRENT']
# logging - start of test script and other basic info
start_sw_version = ctr1.get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter("DVTA-CT-6", "T007", "Basic Interactions on the equipment status page") # testcase ID, Topology Used, Test Case Description
# Initialize the required libraries
util = utils()
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which is not testable items
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# Initialize Webgui
wg = webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms = check_alarms(wg)
print_alarms(startalarms)
# check that we have a working rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
# if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
# logging.info('Spirent connection confirmed ... continuing with test script')
# else:
# if no RF link stop script
# logging.error('Spirent connection has not been established correctly after 3 attempts.')
# ss.simspr_release()
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info("Currently loaded Software Pack is %s. Loading the latest test build - %s." % (curr_sw_version, test_sw_vers))
swpack = load_SWpack(os.path.join(test_sw_vers), wg)
if swpack[0] and swpack[2]:
# Successful downgrade - send results and clear spirent counters
results.set_verify("LOG", util.gframe(), "%s has been upgraded to the latest test build %s" % (ctr1.name, test_sw_vers))
else:
# Unsuccessful downgrade - send results and end script safely
results.set_verify("ERROR", util.gframe(), "%s has NOT been upgraded to the latest test build %s for unknown reasons" % (ctr1.name, test_sw_vers))
end_script('error', results, rig, start_time, wg)
## ========== Test step flow ==========
## ========== Step 1-3 ==========
# 1. Connect to Chrome (the only browser that works with Selenium and html5 drawings)
# 2. Select the following tooltips from the CTR display and go to their configuration pages:
# Fan
# Power
# Tribs 1-2 (random)
# Ports 1-12 (random)
# Plug-ins 1-4
# 3. for each of the above items check that each opens the correct HELP tab
int_array = [['fan', 'Sensors', 'Sensors', 'Sensors'],
['power', 'Sensors', 'Sensors', 'Sensors'],
['T', 'Diagnostics', 'Tributary Diagnostics', 'Tributary Diagnostics'],
['P', 'Configure Ports', 'Port Settings', 'Port Manager'],
['S4', 'Configure Radio Links', 'Radio Interface', 'Radio Link Configuration']]
testcount = len(int_array)
# Logon to CTR via Chrome
wgc = webgui(ctr1.ipaddress, 'Chrome')
wgc.webgui_logon()
time.sleep(5)
# passed test counters
correctlinks = 0
correcthelp = 0
failedlinks = []
# step through the different Interfaces
for inta in int_array:
if inta[0] == 'T':
randy = random.Random()
randint = randy.randint(1, 2)
wgc.webgui_equip_click_trib(randint, inta[1])
elif inta[0] == 'P':
randy = random.Random()
randint = randy.randint(1, 12)
wgc.webgui_equip_click_port(randint, inta[1])
elif 'S' in inta[0]:
slotint = int(inta[0][1:])
wgc.webgui_equip_click_slot(slotint, inta[1])
else:
wgc.webgui_equip_click_misc(inta[0], inta[1])
time.sleep(5)
# check that we are now on the right page
logging.info('Checking the %s menu selection from the Equipment Status page' % inta[1])
if inta[2] in wgc.webgui_equip_get_legend_name():
correctlinks += 1
# try to open the help menu and see if it corresponds to the previous page
wgc.webgui_tab_set_old()
time.sleep(1)
logging.info('Opening the CTR Portal Online Help')
wgc.webgui_equip_click_help()
time.sleep(1)
wgc.webgui_tab_set_new()
wgc.webgui_tab_switch('new')
time.sleep(5)
logging.info('Capturing Help page title')
if inta[3] in wgc.webgui_help_get_title():
correcthelp += 1
wgc.webgui_tab_switch('old')
wgc.webgui_tab_close('new')
else:
failedlinks.append(inta[2])
wgc.webgui_set_page("Status", "Equipment")
time.sleep(10)
time.sleep(5)
wgc.webgui_logoff()
wgc.webgui_close_connection()
if correctlinks == testcount:
# Successful test condition - send results
results.set_verify("PASS", util.gframe(), "All Equipment links to Item Configuration pages work as expected")
else:
# Unsuccessful test condition - send results
results.set_verify("FAIL", util.gframe(), "The following Equipment links to Configuration pages did not work as expected: %s " % failedlinks)
if correcthelp == testcount:
# Successful test condition - send results
results.set_verify("PASS", util.gframe(), "All Configuration page links to the CTR Portal Help pages work as expected")
else:
# Unsuccessful test condition - send results
results.set_verify("FAIL", util.gframe(), "Some of the Configuration page Help links to the CTR Portal Help pages did not work as expected")
## ========== Step 4 ==========
# try a search in the HELP manual and ensure it is correctly displayed
# Logon to CTR via Chrome
wgh = webgui(ctr1.ipaddress, 'Chrome')
wgh.webgui_logon()
time.sleep(5)
# try to open the help menu and see if it corresponds to the previous page
wgh.webgui_tab_set_old()
time.sleep(1)
logging.info('Opening the CTR Portal Online Help')
wgh.webgui_equip_click_help()
time.sleep(1)
wgh.webgui_tab_set_new()
wgh.webgui_tab_switch('new')
time.sleep(5)
if wgh.webgui_help_search('protection') == 'Radio Link Protection':
# Successful test condition - send results
results.set_verify("PASS", util.gframe(), "The CTR Portal Help search Function works as expected")
else:
# Unsuccessful test condition - send results
results.set_verify("FAIL", util.gframe(), "The CTR Portal Help search Function did not work as expected")
wgh.webgui_tab_switch('old')
wgh.webgui_tab_close('new')
# logoff and close window
time.sleep(5)
wgh.webgui_logoff()
wgh.webgui_close_connection()
## ========== Step 5 ==========
# disable a Plug-in card and check that it is no longer displayed
# disable plug-in
rac4._unset()
time.sleep(10)
# logon to CTR1
wgr = webgui(ctr1.ipaddress, 'Chrome')
wgr.webgui_logon()
time.sleep(5)
# check that the plug-in slot 4 is showing empty
menuitem = 'Set slot to detected plugin type'
wgr.webgui_equip_click_slot(4)
if menuitem in wgr.webgui_equip_get_menu():
# Successful test condition - send results
results.set_verify("PASS", util.gframe(), "CTR Portal correctly displays new or unexpected plugin types")
else:
# Unsuccessful test condition - send results
results.set_verify("FAIL", util.gframe(), "CTR Portal is not displaying new or unexpected plugin types")
wgr.webgui_equip_click_slot(4)
## ========== Step 6 ==========
# reset a plug=in card and ensure it is re-displayed
wgr.webgui_equip_select_menu(menuitem)
time.sleep(30)
menua = [4, 'Configure Radio Links', 'Radio Interface']
wgr.webgui_equip_click_slot(menua[0], menua[1])
time.sleep(10)
radiopage = wgr.webgui_equip_get_legend_name()
if menua[2] in radiopage:
# Successful test condition - send results
results.set_verify("PASS", util.gframe(), "CTR Portal has correctly initiated a plugin reset")
else:
# Unsuccessful test condition - send results
results.set_verify("FAIL", util.gframe(), "CTR Portal has not correctly initiated a plugin reset")
# logoff and close window
time.sleep(5)
wgr.webgui_logoff()
wgr.webgui_close_connection()
## ========== Step 7 ==========
# set a few ports to enabled with down connections
alarmtagclicks = ['chassis_eth_port4', 'chassis_eth_port6']
# logon to CTR1
wga = webgui(ctr1.ipaddress, 'Firefox')
wga.webgui_logon()
time.sleep(5)
# go to the Ethernet Port Manager
wga.webgui_set_page("Ethernet Configuration", "Port Manager")
time.sleep(10)
# enable two known disconnected ports
wga.webgui_eth_set_port_enable(4)
ctr1.sendcli('c t; vlan 3; ports add gi 0/4 untagged gi 0/4')
wga.webgui_eth_set_port_enable(6)
ctr1.sendcli('c t; vlan 3; ports add gi 0/6 untagged gi 0/6')
time.sleep(10)
# return to equipment page
wga.webgui_set_page("Status", "Equipment")
time.sleep(600)
tagfound = 0
# check that alarms are raised for the two disconnected ports
for x in alarmtagclicks:
if x in wga.webgui_equip_get_alarm_tags():
tagfound += 1
if tagfound == 2:
# Successful test condition - send results
results.set_verify("PASS", util.gframe(), "CTR Equipment status displays the raised Port Alarms correctly")
else:
# Unsuccessful test condition - send results
results.set_verify("FAIL", util.gframe(), "CTR Equipment status is not displaying the raised Port Alarms correctly")
# go to the Ethernet Port Manager
wga.webgui_set_page("Ethernet Configuration", "Port Manager")
time.sleep(10)
# disable the two ports
wga.webgui_eth_set_port_disable(4)
ctr1.sendcli('c t; vlan 3; no ports gi 0/4 untagged gi 0/4')
wga.webgui_eth_set_port_disable(6)
ctr1.sendcli('c t; vlan 3; no ports gi 0/6 untagged gi 0/6')
time.sleep(10)
# return to equipment page
wga.webgui_set_page("Status", "Equipment")
time.sleep(60)
# check that alarms have been dropped for the two disconnected ports
tagfound = 0
for x in alarmtagclicks:
if x in wga.webgui_equip_get_alarm_tags():
tagfound += 1
if tagfound == 0:
# Successful test condition - send results
results.set_verify("PASS", util.gframe(), "CTR Equipment status is displaying the dropped Port Alarms correctly")
else:
# Unsuccessful test condition - send results
results.set_verify("FAIL", util.gframe(), "CTR Equipment status is not displaying the dropped Port Alarms correctly")
# logoff and close window
time.sleep(5)
wga.webgui_logoff()
wga.webgui_close_connection()
## ========== Step 8 ==========
# Validate that the Inventory(Manufacturers Details) is displayed in the System Information
expectedcards = ['RACx2 plug in module', 'CTR8540 mainboard']
correctcards = 0
# open and logon web browser
wgmd = webgui(ctr1.ipaddress, 'Firefox')
wgmd.webgui_logon()
time.sleep(5)
wgmd.webgui_set_page("System Configuration", "System Information")
wgmd.webgui_set_nav_tab('MANUFACTURE DETAILS')
mandetails = wgmd.webgui_systeminfo_get_mandets()
for x in expectedcards:
if x in mandetails.keys():
correctcards += 1
if correctcards == len(expectedcards):
# Successful test condition - send results
results.set_verify("PASS", util.gframe(), "CTR Manufacture Details is displaying the expected plugin cards")
else:
# Unsuccessful test condition - send results
results.set_verify("FAIL", util.gframe(), "CTR Manufacture Details is NOT displaying the expected plugin cards")
# logoff and close window
time.sleep(5)
wgmd.webgui_logoff()
wgmd.webgui_close_connection()
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
# run the end script
end_script('Normal', results, rig, start_time, wg)
quit()
def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig("DVTA-CT-4", "T008.ini", "C001.ini", developmentrig, False) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
# simple path to each of the Test Equipment ((remove the ones that aren't needed)
ss = rig.devices['SPIRENT']
# logging - start of test script and other basic info
start_sw_version = ctr1.get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter("DVTA-CT-4", "T008", "Verify the date & time management features") # testcase ID, Topology Used, Test Case Description
# Initialize the required libraries
util = utils()
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which is not testable items
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# Initialize Webgui
wg = webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms = check_alarms(wg)
print_alarms(startalarms)
# check that we have a working rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info('Spirent connection confirmed ... continuing with test script')
else:
# if no RF link stop script
logging.error('Spirent connection has not been established correctly after 3 attempts.')
end_script('error', results, rig, start_time, wg, ss)
# Start a spirent outage run for outage capture
ss.simspir_start_outage_run('3/9', '3/10')
logging.info('Starting Spirent Traffic for outage capture')
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info("Currently loaded Software Pack is %s. Loading the latest test build - %s." % (curr_sw_version, test_sw_vers))
swpack = load_SWpack(os.path.join(test_sw_vers), wg)
if swpack[0] and swpack[2]:
# Successful downgrade - send results and clear spirent counters
results.set_verify("LOG", util.gframe(), "%s has been upgraded to the latest test build %s" % (ctr1.name, test_sw_vers))
results.set_verify("LOG", util.gframe(), 'RF Outage during downgrade was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
else:
# Unsuccessful downgrade - send results and end script safely
results.set_verify("ERROR", util.gframe(), "%s has NOT been upgraded to the latest test build %s for unknown reasons" % (ctr1.name, test_sw_vers))
end_script('error', results, rig, start_time, wg, ss)
wg.webgui_logoff()
wg.webgui_close_connection()
## ========== Test step flow ==========
## ========== Step 1 ==========
# Check that the currently set time is what is displayed
logging.info("STEP 1 - Check that the currently set time is what is displayed")
# go to the date time page
wg = webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
wg.webgui_set_page("System Configuration", "Date & Time")
time.sleep(5)
# ensure we are set to SNTP settings to get Network Time
if wg.webgui_datetime_get_clock_source() != "SNTP":
wg.webgui_datetime_set_clock_source("SNTP")
wg.webgui_apply()
time.sleep(30)
# get the currently set system time and the displayed time for comparison
systime = time.localtime()
displaydt = wg.webgui_datetime_get_all_info()
# capture date info
scriptdate = time.strftime("%d %m %Y", systime)
displaydate = time.strftime("%d %m %Y", displaydt['date'])
# capture time info
scripttime = time.strftime("%H:%M", systime)
dtime = displaydt['time']
displaytime = str(dtime[0]) + ":" + str(dtime[1])
if scriptdate == displaydate:
if scripttime == displaytime:
# SNTP time matches system time as expected - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "System Time and Set SNTP Time match as expected")
else:
results.set_verify("FAIL", util.gframe(), "System Time and Set SNTP Time do not match")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "System Date and Set SNTP Date do not match")
# check alarms on webgui (assumes webgui is open)
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 2 ==========
# Change Date and check that it is displayed correctly
logging.info("STEP 2 - Change Date and check that it is displayed correctly")
# go to the date time page
wg.webgui_set_page("System Configuration", "Date & Time")
time.sleep(5)
# ensure we are set to Local settings
if wg.webgui_datetime_get_clock_source() != "Local":
wg.webgui_datetime_set_clock_source("Local")
time.sleep(5)
# set Date to 01-02-03
dateset = "01-02-03"
wg.webgui_datetime_set_date(dateset)
wg.webgui_apply()
time.sleep(30)
ddate = wg.webgui_datetime_get_date()
dispdate = time.strftime("%d-%m-%Y", ddate)
if dateset == dispdate:
# Local set date matches the displayed date as expected - send results
results.set_verify("PASS", util.gframe(), "Set Date and Displayed Date match as expected")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "System Date and Set Date do not match")
# check alarms on webgui (assumes webgui is open)
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 3 ==========
# Change Time and check that it is displayed correctly
logging.info("STEP 3 - Change Time and check that it is displayed correctly")
# go to the date time page
wg.webgui_set_page("System Configuration", "Date & Time")
time.sleep(5)
# ensure we are set to Local settings
if wg.webgui_datetime_get_clock_source() != "Local":
wg.webgui_datetime_set_clock_source("Local")
time.sleep(5)
# set Time to 12:34
timeset = "12:34"
shours = timeset.split(':')[0]
smins = timeset.split(':')[1]
wg.webgui_datetime_set_time(timeset)
wg.webgui_apply()
time.sleep(20)
# get displayed time
dtime = wg.webgui_datetime_get_time()
dhours = dtime[0]
dmins = dtime[1]
if shours == dhours:
if str(smins) == str(dmins) or int(smins) == int(dmins) + 1:
# Local set date matches the displayed date as expected - send results
results.set_verify("PASS", util.gframe(), "Set Time and Displayed Time match as expected")
else:
results.set_verify("FAIL", util.gframe(), "Set Hours and Displayed Hours match, but Minutes do NOT")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Set Time and Displayed Time not match")
# check alarms on webgui (assumes webgui is open)
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 4 ==========
# Change Timezone and check that it is displayed correctly
logging.info("STEP 4 - Change Timezone and check that it is displayed correctly")
# go to the date time page
wg.webgui_set_page("System Configuration", "Date & Time")
time.sleep(5)
# ensure we are set to Local settings
if wg.webgui_datetime_get_clock_source() != "Local":
wg.webgui_datetime_set_clock_source("Local")
time.sleep(5)
# set Timezone to -11:00, -03:30 and +13:00 and check that it has been set correctly
timezones = ["-11:00", "-03:30", "+12:00"]
timezonecheck = 0
for tz in timezones:
if wg.webgui_datetime_set_timezone(tz):
timezonecheck += 1
time.sleep(5)
if timezonecheck == 3:
# Local set date matches the displayed date as expected - send results
results.set_verify("PASS", util.gframe(), "All set Timezones were set and Displayed as expected")
elif timezonecheck == 0:
results.set_verify("FAIL", util.gframe(), "For some reason NO Timezones were set and Displayed correctly")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "A total of %s Timezones were set correctly. The rest were NOT!" % str(timezonecheck))
# check alarms on webgui (assumes webgui is open)
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 5 ==========
# Change Clock source to SNTP and check that the correct time is displayed
logging.info("STEP 5 - Change Clock source to SNTP and check that the correct time is displayed")
# go to the date time page
wg.webgui_set_page("System Configuration", "Date & Time")
time.sleep(5)
# ensure we are set to SNTP settings to get Network Time
wg.webgui_datetime_set_clock_source("SNTP")
wg.webgui_apply()
time.sleep(90)
# get the currently set system time and the displayed time for comparison
systime = time.localtime()
displaydt = wg.webgui_datetime_get_all_info()
# capture date info
scriptdate = time.strftime("%d %m %Y", systime)
displaydate = time.strftime("%d %m %Y", displaydt['date'])
# capture time info
scripttime = time.strftime("%H:%M", systime)
dtime = displaydt['time']
displaytime = str(dtime[0]) + ":" + str(dtime[1])
if scriptdate == displaydate:
if scripttime == displaytime:
# SNTP time matches system time as expected - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "System Time and Set SNTP Time match as expected")
else:
results.set_verify("FAIL", util.gframe(), "System Time and Set SNTP Time do not match")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "System Date and Set SNTP Date do not match")
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
# No rollback commands needed
logging.info("TEST SETUP ROLLBACK: No rollback required")
# run the end script
end_script('Normal', results, rig, start_time, wg, ss)
quit()
def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig(
"DVTA-CT-7-B", "T008.ini", "C001.ini", developmentrig, True
) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
ctr2 = rig.nodes['node2']
# ctr3 = rig.nodes['node3']
# ctr4 = rig.nodes['node4']
# simple path to each of the Test Equipment ((remove the ones that aren't needed)
# mrv = rig.devices['MRV']
matrix = rig.devices['MATRIX']
ss = rig.devices['SPIRENT']
# logging - start of test script and other basic info
start_sw_version = ctr1.get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter(
"DVTA-CT-7-B", "T008",
"Basic RF Capacity configuration functions of CraftTool"
) # testcase ID, Topology Used, Test Case Description
# results = ExcelWriter()
# Initialize the required libraries
util = utils()
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which is not testable items
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info(
"Currently loaded Software Pack is %s. Loading the latest test build - %s."
% (curr_sw_version, test_sw_vers))
for ct in [ctr1, ctr2]:
wgc = webgui(ct.ipaddress, 'Firefox')
wgc.webgui_logon()
swpack = load_SWpack(os.path.join(test_sw_vers), wgc)
if swpack[0] and swpack[2]:
# Successful upgrade - send results and clear Spirent counters
results.set_verify(
"LOG", util.gframe(),
"%s has been upgraded to the latest test build %s" %
(ct.name, test_sw_vers))
results.set_verify(
"LOG", util.gframe(),
'RF Outage during downgrade was %s milliseconds' %
str(ss.simspir_get_value_outage_run()[0]))
else:
# Unsuccessful upgrade - send results and end script safely
results.set_verify(
"ERROR", util.gframe(),
"%s has NOT been upgraded to the latest test build %s for unknown reasons"
% (ct.name, test_sw_vers))
end_script('error', results, rig, start_time, wgc, ss)
quit()
# Initialize Webgui
wg1 = webgui(ctr1.ipaddress, 'Firefox')
wg1.webgui_logon()
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms_ctr1 = check_alarms(wg1)
print_alarms(startalarms_ctr1)
# check that we have a working rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info(
'Spirent connection confirmed ... continuing with test script')
else:
# if no RF link stop script
logging.error(
'Spirent connection has not been established correctly after 3 attempts.'
)
end_script('error', results, rig, start_time, wg1, ss)
quit()
# Start a spirent outage run for outage capture
# ss.simspir_start_outage_run('3/9', '3/10')
# logging.info('Starting Spirent Traffic for outage capture')
time.sleep(10)
## ========== Test step flow ==========
## ========== Step 1 ==========
# Check that the preset RF link is up (and Displayed) and traffic is flowing
wg1.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
protset = wg1.webgui_rf_is_prot_set()
linkup = wg1.webgui_rf_is_link_up('RADIO INT 1/4/1')
if not protset and linkup:
results.set_verify(
"PASS", util.gframe(),
"The Radio Interface Page is displaying the correct non-protected links as expected"
)
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify(
"ERROR", util.gframe(),
"The Radio Interface Page is NOT displaying the correct non-protected links as expected"
)
wg1.webgui_logoff()
wg1.webgui_close_connection()
## ========== Step 2 ==========
# Set RF Frequency to mid range, RF Power to 20dBm, Capacity to QPSK 40MHz then adjust MATRIX to give -45dBm RSL
# A. Set RF Frequency to mid range, Capacity to QPSK 40MHz, RF Power to 20dBm
logging.info(
"Setting RF Frequency to mid range, Capacity to QPSK 40MHz, RF Power to 20dBm"
)
for ctrip in [ctr1.ipaddress, ctr2.ipaddress]:
# log on and go to the Radio configuration Page
wgpi = webgui(ctrip, 'Firefox')
wgpi.webgui_logon()
time.sleep(5)
wgpi.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
# set BW to 7 MHz
wgpi.webgui_rf_set_bandwidth('40 MHz')
wgpi.webgui_apply()
time.sleep(2)
# set modulation to QPSK
wgpi.webgui_rf_set_modulation(['QPSK'])
wgpi.webgui_apply()
time.sleep(2)
# set capacity to 1000
wgpi.webgui_rf_set_link_capacity('1000')
wgpi.webgui_apply()
time.sleep(2)
# set frequency to mid band
for rf in ['tx', 'rx']:
frange = wgpi.webgui_rf_get_freq_range(rf)
totfreq = float(frange[0]) + float(frange[1])
txfreq = str(totfreq / 2)
wgpi.webgui_rf_set_frequency(rf, txfreq)
wgpi.webgui_apply()
time.sleep(2)
wgpi.webgui_rf_apply_tx_power(['20'])
if ctrip == ctr1.ipaddress:
wgpi.webgui_logoff()
wgpi.webgui_close_connection()
time.sleep(10)
# B. adjust MATRIX to give -45dBm RSL
logging.info('B. adjust MATRIX to give -45dBm RSL')
# get the current RSL Level
if set_matrix(wgpi, matrix):
results.set_verify("PASS", util.gframe(),
"RSL figures have been correctly set to -45dB")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify(
"ERROR", util.gframe(),
"RSL figures have not been correctly set to -45dB. Ending Testscript"
)
end_script('error', results, rig, start_time, wgpi, ss)
quit()
wgpi.webgui_logoff()
wgpi.webgui_close_connection()
# ensure traffic flows without any errors or alarms
if ss.simspr_line_check('3/9', '3/10'):
# Successful test condition - send results and clear spirent counters
results.set_verify(
"PASS", util.gframe(),
"Traffic is flowing as expected with RSL level of -45dB")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify(
"FAIL", util.gframe(),
"Traffic is NOT flowing as expected with RSL level of -45dB")
# ensure no extra alarms have been raised
wga = webgui(ctr1.ipaddress, 'Firefox')
wga.webgui_logon()
time.sleep(5)
currentalarms = check_alarms(wga)
if startalarms_ctr1 == currentalarms:
results.set_verify(
"PASS", util.gframe(),
"No alarms have been raised due to change to a RSL level of -45dB")
else:
# Unsuccessful test condition - send results and end script safely
print_alarms(currentalarms)
results.set_verify(
"FAIL", util.gframe(),
"Alarms have been raised due to change to a RSL level of -45dB")
wga.webgui_logoff()
wga.webgui_close_connection()
## ========== Step 3 ==========
# For each BW check:
# A. Link is up with no alarms
# B. Traffic is flowing at the given Max Capacity
# C. SNR is at an expected level
bandwidths = ['7', '14', '28', '40', '55']
logging.info(
"Testing all Bandwidths for correct operation, SNR and Throughput")
for bws in bandwidths:
logging.info("Testing %s MHz Bandwidth" % bws)
# open webgui and set BW
for ctrip in [ctr1.ipaddress, ctr2.ipaddress]:
wgbw = webgui(ctrip, 'Firefox')
wgbw.webgui_logon()
time.sleep(5)
wgbw.webgui_set_page('Radio Configuration',
'Radio Link Configuration')
time.sleep(5)
wgbw.webgui_rf_set_bandwidth(bws + ' MHz')
time.sleep(2)
wgbw.webgui_apply()
time.sleep(2)
wgbw.webgui_logoff()
wgbw.webgui_close_connection()
# A. Link is up with no alarms
time.sleep(10)
wgbw = webgui(ctr1.ipaddress, 'Firefox')
wgbw.webgui_logon()
time.sleep(5)
wgbw.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
# check link is up
logging.info("Checking Link is up with %s MHz Bandwidth" % bws)
linkup = False
for x in range(5):
if wgbw.webgui_rf_is_link_up('RADIO INT 1/4/1'):
linkup = True
break
else:
time.sleep(5)
logging.info('Waiting for Link to establish %s' % str(x))
if linkup:
results.set_verify(
"PASS", util.gframe(),
"The RF link is up with a bandwidth setting of %s" % bws)
else:
results.set_verify(
"FAIL", util.gframe(),
"The RF link has NOT come up with a bandwidth setting of %s" %
bws)
# check alarms
logging.info(
"Checking no Alarms have been raised with %s MHz Bandwidth" % bws)
currentalarms = check_alarms(wgbw)
if startalarms_ctr1 == currentalarms:
results.set_verify(
"PASS", util.gframe(),
"No alarms have been raised due to a set bandwidth of %s" %
bws)
else:
results.set_verify(
"FAIL", util.gframe(),
"Alarms have been raised due to a set bandwidth of %s" % bws)
# B. Traffic is flowing at the given Max Capacity
logging.info("Checking Throughput for %s MHz Bandwidth" % bws)
wgbw.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
maxcap = float(wgbw.webgui_rf_get_max_capacity().replace(' Mbps', ''))
maxthru = float(ss.simspr_get_max_throughput('3/9',
'3/10')[0]) / 1000000
if maxthru >= maxcap - 1 and maxthru <= maxcap:
results.set_verify(
"PASS", util.gframe(),
"Maximum RF Link Throughput of %s due to a bandwidth of %s has been achieved"
% (maxthru, bws))
else:
results.set_verify(
"FAIL", util.gframe(),
"Maximum RF Link Throughput of %s due to a bandwidth of %s has NOT been achieved"
% (maxthru, bws))
# C. SNR is at an expected level
logging.info("Checking SNR levels for %s MHz Bandwidth" % bws)
linksnr = float(wgbw.webgui_rf_get_snr().replace(' dB', ''))
if linksnr >= 32:
results.set_verify(
"PASS", util.gframe(),
"RF Link SNR is %s with a bandwidth of %s" %
(str(linksnr), bws))
else:
results.set_verify(
"FAIL", util.gframe(),
"RF Link SNR is %s with a bandwidth of %s" %
(str(linksnr), bws))
wgbw.webgui_logoff()
wgbw.webgui_close_connection()
## ========== Step 4 ==========
# Set BW to 55MHz QPSK and adjust MATRIX to give -45dBm RSL level
logging.info("Unit should already be set for 55MHz Bandwidth and QPSK")
logging.info("Adjusting MATRIX box for RSL of -45 dB")
wgrsl = webgui(ctr2.ipaddress, 'Firefox')
wgrsl.webgui_logon()
time.sleep(5)
wgrsl.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
# get the current RSL Level
if set_matrix(wgrsl, matrix):
results.set_verify("PASS", util.gframe(),
"RSL figures have been correctly set to -45dB")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify(
"ERROR", util.gframe(),
"RSL figures have not been correctly set to -45dB. Ending Testscript"
)
end_script('error', results, rig, start_time, wgrsl, ss)
quit()
wgrsl.webgui_logoff()
wgrsl.webgui_close_connection()
## ========== Step 5 ==========
# For each Modulation check:
# A. Link is up with no alarms
# B. Traffic is flowing at the given Max Capacity
# C. SNR is at an expected level
modulations = [
'QPSK', '16QAM', '32QAM', '64QAM', '128QAM', '256QAM', '512QAM',
'1024QAM HIGH GAIN'
]
logging.info(
"Testing all Modulations for correct operation, SNR and Throughput")
for mods in modulations:
logging.info("Testing %s Fixed Modulation" % mods)
# open webgui and set BW
for ctrip in [ctr1.ipaddress, ctr2.ipaddress]:
wgbw = webgui(ctrip, 'Firefox')
wgbw.webgui_logon()
time.sleep(5)
wgbw.webgui_set_page('Radio Configuration',
'Radio Link Configuration')
time.sleep(5)
wgbw.webgui_rf_set_modulation([mods])
time.sleep(2)
wgbw.webgui_apply()
time.sleep(2)
wgbw.webgui_logoff()
wgbw.webgui_close_connection()
time.sleep(2)
# A. Link is up with no alarms
time.sleep(10)
wgbw = webgui(ctr1.ipaddress, 'Firefox')
wgbw.webgui_logon()
time.sleep(5)
wgbw.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
# check link is up
logging.info("Checking Link is up with %s Modulation" % mods)
linkup = False
for x in range(5):
if wgbw.webgui_rf_is_link_up('RADIO INT 1/4/1'):
linkup = True
break
else:
time.sleep(5)
logging.info('Waiting for Link to establish %s' % str(x))
if linkup:
results.set_verify(
"PASS", util.gframe(),
"The RF link is up with a modulation setting of %s" % mods)
else:
results.set_verify(
"FAIL", util.gframe(),
"The RF link has NOT come up with a modulation setting of %s" %
mods)
# check alarms
logging.info("Checking no Alarms have been raised with %s Modulation" %
mods)
currentalarms = check_alarms(wgbw)
if startalarms_ctr1 == currentalarms:
results.set_verify(
"PASS", util.gframe(),
"No alarms have been raised due to a set bandwidth of %s" %
mods)
else:
results.set_verify(
"FAIL", util.gframe(),
"Alarms have been raised due to a set bandwidth of %s" % mods)
# B. Traffic is flowing at the given Max Capacity
logging.info("Checking Throughput for %s Modulation" % mods)
wgbw.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
maxcap = float(wgbw.webgui_rf_get_max_capacity().replace(' Mbps', ''))
maxthru = float(ss.simspr_get_max_throughput('3/9',
'3/10')[0]) / 1000000
# should be greater than 95% of Max Capacity
maxcapmin = maxcap * 0.95
if maxthru >= maxcapmin and maxthru <= maxcap:
results.set_verify(
"PASS", util.gframe(),
"Maximum RF Link Throughput of %s due to a modulation of %s has been achieved"
% (maxthru, mods))
else:
results.set_verify(
"FAIL", util.gframe(),
"Maximum RF Link Throughput of %s due to a modulation of %s has NOT been achieved"
% (maxthru, mods))
# C. SNR is at an expected level
logging.info("Checking SNR levels for %s Modulation" % mods)
linksnr = float(wgbw.webgui_rf_get_snr().replace(' dB', ''))
if linksnr >= 32:
results.set_verify(
"PASS", util.gframe(),
"RF Link SNR is %s with a modulation of %s" %
(str(linksnr), mods))
else:
results.set_verify(
"FAIL", util.gframe(),
"RF Link SNR is %s with a modulation of %s" %
(str(linksnr), mods))
wgbw.webgui_logoff()
wgbw.webgui_close_connection()
## ========== Step 6 ==========
# Set ACM 55MHz with Max Mod = 1024QAM and Base Mod = QPSK - Also set ATPC
logging.info('Set Nodes for: 55MHz ACM QPSK to 1024QAM with ATPC')
for ctrip in [ctr1.ipaddress, ctr2.ipaddress]:
wgacm = webgui(ctrip, 'Firefox')
wgacm.webgui_logon()
time.sleep(5)
wgacm.webgui_set_page('Radio Configuration',
'Radio Link Configuration')
time.sleep(5)
# set ACM modulation
wgacm.webgui_rf_set_modulation(
['QPSK', '1024QAM HIGH GAIN', '1024QAM HIGH GAIN'])
time.sleep(2)
wgacm.webgui_apply()
time.sleep(2)
# set ATPC
wgacm.webgui_rf_set_atpc(True)
pwrnge = wgacm.webgui_rf_get_pwr_range()
wgacm.webgui_rf_apply_tx_power([pwrnge[0], pwrnge[1]], fade='10')
time.sleep(2)
wgacm.webgui_logoff()
wgacm.webgui_close_connection()
logging.info("MATRIX box should already be set for an RSL of -45 dB")
logging.info("Checking for Traffic Flow and Alarms")
# login to Node
wgacm = webgui(ctr1.ipaddress, 'Firefox')
wgacm.webgui_logon()
time.sleep(5)
wgacm.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
# ensure traffic is flowing
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
results.set_verify("PASS", util.gframe(),
"Traffic is still flowing after ACM being set")
else:
# if no RF link stop script
results.set_verify("FAIL", util.gframe(),
"Traffic is NOT flowing after ACM being set")
end_script('error', results, rig, start_time, wgacm, ss)
quit()
# check for alarms
currentalarms = check_alarms(wgacm)
if startalarms_ctr1 == currentalarms:
results.set_verify("PASS", util.gframe(),
"No alarms have been raised due to ACM being set")
else:
results.set_verify("FAIL", util.gframe(),
"Alarms have been raised due to ACM being set")
wgacm.webgui_logoff()
wgacm.webgui_close_connection()
## ========== Step 6 ==========
# Create a very slow fade and capture all changes in Modulation due to fade
logging.info(
'Create a very slow fade and capture all changes in Modulation due to fade'
)
wgfade = webgui(ctr1.ipaddress, 'Firefox')
wgfade.webgui_logon()
time.sleep(5)
wgfade.webgui_set_page('Statistics', 'Radio Link')
time.sleep(5)
# get current radio link values
initial_att = float(matrix.get_att(11))
rlstats = wgfade.webgui_stat_get_radio_links()
initial_mod = str(
rlstats['Radio Interface 1/4/1']['Current Rx Modulation'])
initial_pwr = str(rlstats['Radio Interface 1/4/1']['Tx Power'])
logging.info(
"Current Settings are %s at %s with %s dB attenuation in the path" %
(initial_mod, initial_pwr, str(initial_att)))
shifted_mod = initial_mod
atpc = False
acm = 0
# recursive loop
logging.info('Fading attenuator to get change of Modulation')
for x in range(1, 45, 2):
# fade attenuator by 1dB
matrix.set_att_fade(11, initial_att + x, 1)
time.sleep(1)
curstats = wgfade.webgui_stat_get_radio_links()
cur_mod = str(
curstats['Radio Interface 1/4/1']['Current Rx Modulation'])
cur_pwr = str(curstats['Radio Interface 1/4/1']['Tx Power'])
if cur_mod != shifted_mod:
acm += 1
logging.info(
'A change of Modulation has taken place. From %s to %s' %
(shifted_mod, cur_mod))
shifted_mod = cur_mod
if float(cur_pwr.replace(' dBm', '')) >= float(
initial_pwr.replace(' dBm', '')) + 5 or float(
cur_pwr.replace(' dBm', '')) <= float(
initial_pwr.replace(' dBm', '')) - 5:
if not atpc:
logging.info(
"A change of Tx Power of more than 5dB has shown ATPC works as expected"
)
atpc = True
if atpc:
results.set_verify(
"PASS", util.gframe(),
"Changes in Tx Power of more than 5dB have shown that ATPC is working as expected"
)
else:
results.set_verify(
"FAIL", util.gframe(),
"Changes in Tx Power of more than 5dB have NOT been seen indicating that ATPC is NOT working as expected"
)
if acm >= 1:
results.set_verify(
"PASS", util.gframe(),
"Modulation changes due to an RF fade has shown ACM is working as expected"
)
else:
results.set_verify(
"FAIL", util.gframe(),
"Modulation changes due to an RF fade have NOT been seen indicating that ACM is NOT working as expected"
)
## ========== Step 7 ==========
# Unfade link and ensure Modulation is restored to 1024QAM
logging.info("Unfade link and ensure Modulation is restored to 1024QAM")
matrix.set_att_fade(11, initial_att, 5)
time.sleep(10)
curstats = wgfade.webgui_stat_get_radio_links()
cur_mod = str(curstats['Radio Interface 1/4/1']['Current Rx Modulation'])
if cur_mod == initial_mod:
results.set_verify(
"PASS", util.gframe(),
"Modulation has returned to its Maximum setting after an RF Unfade"
)
else:
results.set_verify(
"FAIL", util.gframe(),
"Modulation has NOT returned to its Maximum setting after an RF Unfade"
)
wgfade.webgui_logoff()
wgfade.webgui_close_connection()
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
logging.info(
'Rollback Not needed all settings will be reset during next testscript configuration'
)
wg1 = webgui(ctr1.ipaddress, 'Firefox')
wg1.webgui_logon()
time.sleep(5)
# run the end script
end_script('Normal', results, rig, start_time, wg1, ss)
quit()
def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig("DVTA-CT-7-A", "T008.ini", "C001.ini", developmentrig, True) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
ctr2 = rig.nodes['node2']
# ctr3 = rig.nodes['node3']
# ctr4 = rig.nodes['node4']
# simple path to each of the Test Equipment ((remove the ones that aren't needed)
# mrv = rig.devices['MRV']
matrix = rig.devices['MATRIX']
ss = rig.devices['SPIRENT']
# logging - start of test script and other basic info
start_sw_version = ctr1.get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter("DVTA-CT-7-A", "T008", "Basic RF Frequency and power configuration functions of CraftTool") # testcase ID, Topology Used, Test Case Description
# results = ExcelWriter()
# Initialize the required libraries
util = utils()
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which is not testable items
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info("Currently loaded Software Pack is %s. Loading the latest test build - %s." % (curr_sw_version, test_sw_vers))
for ct in [ctr1, ctr2]:
wgc = webgui(ct.ipaddress, 'Firefox')
wgc.webgui_logon()
swpack = load_SWpack(os.path.join(test_sw_vers), wgc)
if swpack[0] and swpack[2]:
# Successful upgrade - send results and clear Spirent counters
results.set_verify("LOG", util.gframe(), "%s has been upgraded to the latest test build %s" % (ct.name, test_sw_vers))
results.set_verify("LOG", util.gframe(), 'RF Outage during downgrade was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
else:
# Unsuccessful upgrade - send results and end script safely
results.set_verify("ERROR", util.gframe(), "%s has NOT been upgraded to the latest test build %s for unknown reasons" % (ct.name, test_sw_vers))
end_script('error', results, rig, start_time, wgc, ss)
quit()
# Initialize Webgui
wg1 = webgui(ctr1.ipaddress, 'Firefox')
wg1.webgui_logon()
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms_ctr1 = check_alarms(ctr1.ipaddress)
print_alarms(startalarms_ctr1)
# check that we have a working rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info('Spirent connection confirmed ... continuing with test script')
else:
# if no RF link stop script
logging.error('Spirent connection has not been established correctly after 3 attempts.')
end_script('error', results, rig, start_time, wg1, ss)
quit()
# Start a spirent outage run for outage capture
# ss.simspir_start_outage_run('3/9', '3/10')
# logging.info('Starting Spirent Traffic for outage capture')
time.sleep(10)
## ========== Test step flow ==========
## ========== Step 1 ==========
# Disable RAC Interface and ensure Traffic drops and Alarms are raised
# go to radio page and disable RAC interface
logging.info("Disable RAC Interface and ensure Traffic drops and Alarms are raised")
wg1.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
wg1.webgui_rf_set_radio_int('RADIO INT 1/4/1')
time.sleep(2)
wg1.webgui_rf_disable_interface()
wg1.webgui_apply()
time.sleep(10)
if not ss.simspr_line_check('3/9', '3/10'):
# Successful test condition - send results and clear spirent counters
print "Traffic Stopped"
results.set_verify("PASS", util.gframe(), "Disabling of the RAC Interface Port stops Traffic Flowing as expected")
else:
print "Traffic flowing"
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Disabling of the RAC Interface Port did NOT stop Traffic Flowing")
# check alarms on webgui (assumes webgui is open)
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms_ctr1 != currentalarms:
print_alarms(currentalarms)
results.set_verify("PASS", util.gframe(), "Radio Interface Alarm has been raised as expected")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Radio Interface Alarm has not been raised")
## ========== Step 2 ==========
# Enable RAC Interface and ensure Traffic resumes and Alarms are dropped
# go to radio page and enable RAC interface
logging.info("Enable RAC Interface and ensure Traffic resumes and Alarms are dropped")
wg1.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
wg1.webgui_rf_set_radio_int('RADIO INT 1/4/1')
time.sleep(2)
wg1.webgui_rf_enable_interface()
wg1.webgui_apply()
time.sleep(10)
if ss.simspr_line_check('3/9', '3/10'):
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "Enabling of the RAC Interface Port allowed the Traffic to Flow as expected")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Enabling of the RAC Interface Port did NOT allow the Traffic to Flow")
# check alarms to see whether Interface Alarm has been dropped
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms_ctr1 == currentalarms:
results.set_verify("PASS", util.gframe(), "Radio Interface Alarm has been dropped as expected")
else:
# Unsuccessful test condition - send results and end script safely
print_alarms(currentalarms)
results.set_verify("FAIL", util.gframe(), "Radio Interface Alarm has not been dropped")
# Close webgui connection ready for next part
wg1.webgui_logoff()
wg1.webgui_close_connection()
## ========== Step 2 ==========
# RF Frequency Parameter Validation:
# A. set the bandwidth to ETSI 7MHz and change frequency to lowest possible
# B. ensure traffic flows without any errors or alarms
# C. set frequency to highest possible
# D. Repeat step B
# E. set BW to ETSI 7MHz and set the largest Tx/Rx Spacing available (ie lowest Rx Freq highest Tx Freq)
# F. Repeat step B
# G. Set BW to ETSI 55MHz and ensure frequency not valid warning is displayed
logging.info("RF Frequency Parameter Validation")
# A. set the bandwidth to ETSI 7MHz and change frequency to lowest possible
logging.info("Check ODU operation at the lowest frequency possible")
for ctrip in [ctr1.ipaddress, ctr2.ipaddress]:
logging.info('Setting CTR %s to 7MHz BW, with frequencies set to lowest possible' % ctrip)
# log on and go to the Radio configuration Page
wgl = webgui(ctrip, 'Firefox')
wgl.webgui_logon()
time.sleep(5)
wgl.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
# set BW to 7 MHz
wgl.webgui_rf_set_bandwidth('7 MHz')
wgl.webgui_apply()
time.sleep(5)
# get and set the required freq's
txlowfreq = wgl.webgui_rf_get_freq_range('tx')[0]
wgl.webgui_rf_set_frequency('tx', txlowfreq)
wgl.webgui_apply()
time.sleep(5)
rxlowfreq = wgl.webgui_rf_get_freq_range('rx')[0]
wgl.webgui_rf_set_frequency('rx', rxlowfreq)
wgl.webgui_apply()
time.sleep(5)
logging.info('CTR %s has been setup at 7 MHz BW, with freq set to tx = %s and rx = %s' % (ctrip, txlowfreq, rxlowfreq))
wgl.webgui_logoff()
wgl.webgui_close_connection()
# B. ensure traffic flows without any errors or alarms
if ss.simspr_line_check('3/9', '3/10'):
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "Traffic is flowing as expected for lowest Possible Frequency")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Traffic is NOT flowing for lowest Possible Frequency")
# ensure no extra alarms have been raised
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms_ctr1 == currentalarms:
results.set_verify("PASS", util.gframe(), "No alarms have been raised due to change of BW or low frequency")
else:
# Unsuccessful test condition - send results and end script safely
print_alarms(currentalarms)
results.set_verify("FAIL", util.gframe(), "Alarms have been raised due to change of BW or low frequency")
# C. set frequency to highest possible
logging.info("Check ODU operation at the highest frequency possible")
for ctrip in [ctr1.ipaddress, ctr2.ipaddress]:
logging.info('Setting CTR %s to 7MHz BW, with frequencies set to highest possible' % ctrip)
# log on and go to the Radio configuration Page
wgh = webgui(ctrip, 'Firefox')
wgh.webgui_logon()
time.sleep(5)
wgh.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
# get and set the required freq's
txhighfreq = wgh.webgui_rf_get_freq_range('tx')[1]
wgh.webgui_rf_set_frequency('tx', txhighfreq)
wgh.webgui_apply()
time.sleep(5)
rxhighfreq = wgh.webgui_rf_get_freq_range('rx')[1]
wgh.webgui_rf_set_frequency('rx', rxhighfreq)
wgh.webgui_apply()
time.sleep(5)
logging.info('CTR %s has been setup at 7 MHz BW, with freq set to tx = %s and rx = %s' % (ctrip, txhighfreq, rxhighfreq))
wgh.webgui_logoff()
wgh.webgui_close_connection()
# D. ensure traffic flows without any errors or alarms
if ss.simspr_line_check('3/9', '3/10'):
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "Traffic is flowing as expected for the highest possible Frequency")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Traffic is NOT flowing for the highest possible Frequency")
# ensure no extra alarms have been raised
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms_ctr1 == currentalarms:
results.set_verify("PASS", util.gframe(), "No alarms have been raised due to change of BW or high frequency")
else:
# Unsuccessful test condition - send results and end script safely
print_alarms(currentalarms)
results.set_verify("FAIL", util.gframe(), "Alarms have been raised due to change of BW or high frequency")
# E. set BW to ETSI 7MHz and set the largest Tx/Rx Spacing available (ie lowest Rx Freq highest Tx Freq)
logging.info("Check ODU operation at the largest Tx-Rx Spacing available (ie lowest Rx Freq highest Tx Freq)")
highfreq = 1
lowfreq = 0
for ctrip in [ctr1.ipaddress, ctr2.ipaddress]:
logging.info('Setting CTR %s with frequencies set to the largest Tx-Rx Spacing available' % ctrip)
# log on and go to the Radio configuration Page
wgs = webgui(ctrip, 'Firefox')
wgs.webgui_logon()
time.sleep(5)
wgs.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
# get and set the required freq's
txfreq = wgs.webgui_rf_get_freq_range('tx')[highfreq]
wgs.webgui_rf_set_frequency('tx', txfreq)
wgs.webgui_apply()
time.sleep(5)
rxfreq = wgs.webgui_rf_get_freq_range('rx')[lowfreq]
wgs.webgui_rf_set_frequency('rx', rxfreq)
wgs.webgui_apply()
time.sleep(5)
logging.info('CTR %s has been setup with freq set to tx = %s and rx = %s' % (ctrip, txfreq, rxfreq))
wgs.webgui_logoff()
wgs.webgui_close_connection()
# Needed to set the correct frequencies
highfreq = 0
lowfreq = 1
# F. ensure traffic flows without any errors or alarms
if ss.simspr_line_check('3/9', '3/10'):
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "Traffic is flowing as expected for the largest Tx-Rx Spacing available")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Traffic is NOT flowing for the largest Tx-Rx Spacing available")
# ensure no extra alarms have been raised
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms_ctr1 == currentalarms:
results.set_verify("PASS", util.gframe(), "No alarms have been raised due to change of BW or frequencies")
else:
# Unsuccessful test condition - send results and end script safely
print_alarms(currentalarms)
results.set_verify("FAIL", util.gframe(), "Alarms have been raised due to change of BW or frequencies")
# G. Set BW to ETSI 55MHz and ensure frequency not valid warning is displayed
logging.info("Set BW to ETSI 55MHz and ensure frequency not valid warning is displayed")
# login to ctr1
wgw = webgui(ctr1.ipaddress, 'Firefox')
wgw.webgui_logon()
time.sleep(5)
wgw.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
# set BW to 55 MHz
wgw.webgui_rf_set_bandwidth('55 MHz')
wgw.webgui_apply()
time.sleep(5)
freqwarnings = 0
# warnings should be raised - capture and check for
for x in wgw.webgui_rf_get_entry_errors():
if 'Tx Frequency must be within' in x:
freqwarnings += 1
if 'Rx Frequency must be within' in x:
freqwarnings += 1
wgw.webgui_logoff()
wgw.webgui_close_connection()
if freqwarnings == 2:
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "Setting warning was displayed for the incorrect Tx and Rx Frequencies")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Setting warning was NOT displayed for the incorrect Tx and Rx Frequencies")
## ========== Step 3 ==========
# RF Power Parameter Validation:
# A. Set RF Frequency to mid range, Capacity to QPSK 40MHz, RF Power to 20dBm
# B. adjust MATRIX to give -45dBm RSL
# C. adjust Power to the following conditions, ensure RSL adjusts within spec, traffic flows and no errors or alarms are raised
# i. Max with NO High Power
# ii. Max with High Power
# iii. Min
# A. Set RF Frequency to mid range, Capacity to QPSK 40MHz, RF Power to 20dBm
logging.info("Setting RF Frequency to mid range, Capacity to QPSK 40MHz, RF Power to 20dBm")
for ctrip in [ctr1.ipaddress, ctr2.ipaddress]:
# log on and go to the Radio configuration Page
wgpi = webgui(ctrip, 'Firefox')
wgpi.webgui_logon()
time.sleep(5)
wgpi.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
# set BW to 7 MHz
wgpi.webgui_rf_set_bandwidth('40 MHz')
wgpi.webgui_apply()
time.sleep(2)
# set modulation to QPSK
wgpi.webgui_rf_set_modulation(['QPSK'])
wgpi.webgui_apply()
time.sleep(2)
# set frequency to mid band
for rf in ['tx', 'rx']:
frange = wgpi.webgui_rf_get_freq_range(rf)
totfreq = float(frange[0]) + float(frange[1])
txfreq = str(totfreq / 2)
wgpi.webgui_rf_set_frequency(rf, txfreq)
wgpi.webgui_apply()
time.sleep(2)
wgpi.webgui_rf_apply_tx_power(['20'])
wgpi.webgui_logoff()
wgpi.webgui_close_connection()
time.sleep(10)
# ensure traffic flows without any errors or alarms
if ss.simspr_line_check('3/9', '3/10'):
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "Traffic is flowing as expected for the initial RF Power configuration")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Traffic is NOT flowing as expected for the initial RF Power configuration")
# ensure no extra alarms have been raised
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms_ctr1 == currentalarms:
results.set_verify("PASS", util.gframe(), "No alarms have been raised due to changes for the initial RF Power configuration")
else:
# Unsuccessful test condition - send results and end script safely
print_alarms(currentalarms)
results.set_verify("FAIL", util.gframe(), "Alarms have been raised due to changes for the initial RF Power configuration")
# B. adjust MATRIX to give -45dBm RSL
logging.info('B. adjust MATRIX to give -45dBm RSL')
# get the current RSL Level
# log on and go to the radio config page
wgrsl2 = webgui(ctr2.ipaddress, 'Firefox')
wgrsl2.webgui_logon()
time.sleep(5)
wgrsl2.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
if set_matrix(wgrsl2, matrix):
results.set_verify("PASS", util.gframe(), "RSL figures have been correctly set to -45dB")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("ERROR", util.gframe(), "RSL figures have not been correctly set to -45dB. Ending Testscript")
end_script('error', results, rig, start_time, wgrsl2, ss)
quit()
wgrsl2.webgui_logoff()
wgrsl2.webgui_close_connection()
# ensure traffic flows without any errors or alarms
if ss.simspr_line_check('3/9', '3/10'):
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "Traffic is flowing as expected with RSL level of -45dB")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Traffic is NOT flowing as expected with RSL level of -45dB")
# ensure no extra alarms have been raised
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms_ctr1 == currentalarms:
results.set_verify("PASS", util.gframe(), "No alarms have been raised due to change to a RSL level of -45dB")
else:
# Unsuccessful test condition - send results and end script safely
print_alarms(currentalarms)
results.set_verify("FAIL", util.gframe(), "Alarms have been raised due to change to a RSL level of -45dB")
# C. adjust Power to the following conditions, ensure RSL adjusts within spec, traffic flows and no errors or alarms are raised
# i. Max with NO High Power
# ii. Max with High Power
# iii. Min
logging.info('C. adjust Power to the following conditions, ensure RSL adjusts within spec, traffic flows and no errors or alarms are raised')
# open the FAR END Node and check that the starting RSL level
wgrsl2 = webgui(ctr2.ipaddress, 'Firefox')
wgrsl2.webgui_logon()
time.sleep(5)
wgrsl2.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
startrsl = float(wgrsl2.webgui_rf_get_rsl().replace(' dBm', ''))
startingpwr = 20
for ptype in ['max', 'min', 'high-max']:
logging.info('Setting %s Power Level' % ptype)
setlvl = set_pwrlvl(ctr1, ptype)
print "Set Level = " + setlvl
# get and compare rsl levels
dBchange = float(setlvl) - float(startingpwr)
expectedrsl = startrsl + dBchange
print "Expected RSL = " + str(expectedrsl)
time.sleep(10)
currrsl = float(wgrsl2.webgui_rf_get_rsl().replace(' dBm', ''))
print 'Current RSL = ' + str(currrsl)
# check change of RSL level
if currrsl >= expectedrsl - 1 and currrsl <= expectedrsl + 1:
results.set_verify("PASS", util.gframe(), "RSL level has changed to the expected value of %s after changing to %s power level of %s" % (str(currrsl), ptype, str(setlvl)))
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "RSL level has NOT changed to the expect value of %s after changing to %s power level of %s" % (str(currrsl), ptype, str(setlvl)))
# ensure traffic flows without any errors or alarms
if ss.simspr_line_check('3/9', '3/10'):
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "Traffic is flowing as expected for the %s RF Power configuration" % ptype)
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Traffic is NOT flowing as expected for the %s RF Power configuration" % ptype)
# ensure no extra alarms have been raised
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms_ctr1 == currentalarms:
results.set_verify("PASS", util.gframe(), "No alarms have been raised due to change of Power levels")
else:
# Unsuccessful test condition - send results and end script safely
print_alarms(currentalarms)
results.set_verify("FAIL", util.gframe(), "Alarms have been raised due to change of Power levels")
wgrsl2.webgui_logoff()
wgrsl2.webgui_close_connection()
## ========== Step 4 ==========
# RF Tx Mute Diagnostics
logging.info('RF Tx Mute Diagnostics')
# set TX Mute for the current rf link
wgtxm = webgui(ctr1.ipaddress, 'Firefox')
wgtxm.webgui_logon()
time.sleep(5)
wgtxm.webgui_set_page('Radio Configuration', 'Radio Link Diagnostics')
time.sleep(5)
wgtxm.webgui_rf_set_tx_mute('1/4/1', True)
time.sleep(20)
# check that the Tx mute alarm is raised
txmute_alarm_chk = check_alarms(ctr1.ipaddress)
alarmfound = 0
print_alarms(txmute_alarm_chk)
for al in txmute_alarm_chk:
for x in al:
if 'transmitter mute diagnostic' in x:
results.set_verify("LOG", util.gframe(), 'The expected Tx Mute alarm was raised')
alarmfound += 1
if 'Transmit path has been lost' in x:
results.set_verify("LOG", util.gframe(), 'The expected Transmit Path failure alarm was raised')
alarmfound += 1
if 'Radio traffic path' in x:
results.set_verify("LOG", util.gframe(), 'The expected Radio traffic path alarm was raised')
alarmfound += 1
if alarmfound == 3:
results.set_verify("PASS", util.gframe(), 'All of the expected alarms were raised as expected')
else:
results.set_verify("FAIL", util.gframe(), 'All of the expected alarms were NOT raised as expected')
# check that the Detected Tx Power is Muted
wgtxm.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
currtxpwr = wgtxm.webgui_rf_get_detected_power()
if currtxpwr == 'Muted':
results.set_verify("PASS", util.gframe(), 'Detected Tx Power is displaying Muted as expected')
else:
results.set_verify("FAIL", util.gframe(), 'Detected Tx Power is NOT displaying Muted')
# check that the rf link is not transmitting and not passing Traffic
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
results.set_verify("FAIL", util.gframe(), 'Spirent connection is up even though Tx Mute is set')
else:
results.set_verify("PASS", util.gframe(), 'Spirent connection down as expected for the Tx muted RF Link.')
# turn off the Diagnostic function
wgtxm.webgui_set_page('Radio Configuration', 'Radio Link Diagnostics')
time.sleep(5)
wgtxm.webgui_rf_set_tx_mute('1/4/1', False)
time.sleep(5)
wgtxm.webgui_logoff()
wgtxm.webgui_close_connection()
## ========== Step 5 ==========
# IF Loopback Diagnostics
logging.info('IF Loopback Diagnostics')
# set IF loopback for the current rf link
wgiflb = webgui(ctr1.ipaddress, 'Firefox')
wgiflb.webgui_logon()
time.sleep(5)
wgiflb.webgui_set_page('Radio Configuration', 'Radio Link Diagnostics')
time.sleep(5)
wgiflb.webgui_rf_set_if_lb_dura('1/4/1', True)
time.sleep(20)
# check that the IF loopback alarm is raised
iflb_alarm_chk = check_alarms(ctr1.ipaddress)
print_alarms(iflb_alarm_chk)
for al in iflb_alarm_chk:
for x in al:
if 'IF loopback diagnostic' in x:
results.set_verify("PASS", util.gframe(), 'The expected IF loopback diagnostic alarm was raised')
if 'Transmit path has been lost' in x:
results.set_verify("FAIL", util.gframe(), 'The Transmit Path failure alarm was raised')
if 'Radio traffic path' in x:
results.set_verify("FAIL", util.gframe(), 'The Radio traffic path alarm was raised')
# check that the Detected Tx Power is Muted
wgiflb.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
currtxpwr = wgiflb.webgui_rf_get_detected_power()
if currtxpwr == 'Muted':
results.set_verify("PASS", util.gframe(), 'Detected Tx Power is displaying Muted as expected')
else:
results.set_verify("FAIL", util.gframe(), 'Detected Tx Power is NOT displaying Muted')
# check that the rf link is not transmitting and not passing Traffic
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
results.set_verify("FAIL", util.gframe(), 'Spirent connection is up even though IF loopback is set')
else:
results.set_verify("PASS", util.gframe(), 'Spirent connection down as expected for the IF loopback RF Link.')
# turn off the Diagnostic function
wgiflb.webgui_set_page('Radio Configuration', 'Radio Link Diagnostics')
time.sleep(5)
wgiflb.webgui_rf_set_if_lb_dura('1/4/1', False)
time.sleep(5)
wgiflb.webgui_logoff()
wgiflb.webgui_close_connection()
wgrsl1 = webgui(ctr1.ipaddress, 'Firefox')
wgrsl1.webgui_logon()
time.sleep(5)
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
logging.info('Rollback Not needed all settings will be reset during next testscript configuration')
# run the end script
end_script('Normal', results, rig, start_time, wgrsl1, ss)
quit()
def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig("DVTA-CT-9", "T008.ini", "C001.ini", developmentrig, True) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
ctr2 = rig.nodes['node2']
# ctr3 = rig.nodes['node3']
# ctr4 = rig.nodes['node4']
# simple path to each of the Test Equipment ((remove the ones that aren't needed)
# mrv = rig.devices['MRV']
# matrix = rig.devices['MATRIX']
ss = rig.devices['SPIRENT']
# logging - start of test script and other basic info
start_sw_version = ctr1.get_sw_version() # rig.nodes['node1'].get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter("DVTA-CT-9", "T008", "Basic Alarm and Event Logging functions of CraftTool") # testcase ID, Topology Used, Test Case Description
# results = ExcelWriter()
# Initialize the required libraries
util = utils()
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which is not testable items
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# Initialize Webgui
wg = webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms = check_alarms(wg)
print_alarms(startalarms)
# check that we have a working rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info('Spirent connection confirmed ... continuing with test script')
else:
# if no RF link stop script
logging.error('Spirent connection has not been established correctly after 3 attempts.')
end_script('error', results, rig, start_time, wg, ss)
# Start a spirent outage run for outage capture
ss.simspir_start_outage_run('3/9', '3/10')
logging.info('Starting Spirent Traffic for outage capture')
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info("Currently loaded Software Pack is %s. Loading the latest test build - %s." % (curr_sw_version, test_sw_vers))
swpack = load_SWpack(os.path.join(test_sw_vers), wg)
if swpack[0] and swpack[2]:
# Successful downgrade - send results and clear spirent counters
results.set_verify("LOG", util.gframe(), "%s has been upgraded to the latest test build %s" % (ctr2.name, test_sw_vers))
results.set_verify("LOG", util.gframe(), 'RF Outage during downgrade was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
else:
# Unsuccessful downgrade - send results and end script safely
results.set_verify("ERROR", util.gframe(), "%s has NOT been upgraded to the latest test build %s for unknown reasons" % (ctr2.name, test_sw_vers))
end_script('error', results, rig, start_time, wg, ss)
## ========== Test step flow ==========
## ========== Step 1 ==========
# go to the port Manager page and enable a disconnected port
logging.info('Go to the Port Manager page and enable a disconnected port')
wg.webgui_set_page('Ethernet Configuration', 'Port Manager')
time.sleep(5)
wg.webgui_eth_set_port_enable(5)
# wait for 5 minutes to ensure the alarm is raised (there is an existing JIRA for this)
time.sleep(300)
# go to the Alarms page and ensure the that the Alarm has been raised
currentalarms = check_alarms(wg)
print_alarms(currentalarms)
foundalarm = False
for x in currentalarms:
if 'Ethernet port link down' in x[3]:
foundalarm = True
if foundalarm:
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "The Ethernet port link down Alarm was raised as expected")
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "The Ethernet port link down Alarm was not raised as expected")
## ========== Step 2 ==========
# ensure that the ALarm has a history tag attached to it
logging.info('Ensure that the ALarm has a history tag attached to it')
historyalarms = wg.webgui_alarm_get_history()
print_alarms(historyalarms)
foundalarm = False
for x in currentalarms:
if 'Ethernet port link down' in x[3]:
foundalarm = True
if foundalarm:
results.set_verify("PASS", util.gframe(), "The Ethernet port link down Alarm is displayed as recently raised ... as expected")
else:
results.set_verify("FAIL", util.gframe(), "The Ethernet port link down Alarm was not displayed as recently raised")
wg.webgui_set_page('Ethernet Configuration', 'Port Manager')
time.sleep(5)
wg.webgui_eth_set_port_disable(5)
time.sleep(10)
## ========== Step 3 ==========
# This is where Log Event testing will go however this needs work and will be done in the future
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
# run the end script
end_script('Normal', results, rig, start_time, wg, ss)
quit()
def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig("DVTA-CT-8", "T008.ini", "C001.ini", developmentrig, True) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
ctr2 = rig.nodes['node2']
# ctr3 = rig.nodes['node3']
# ctr4 = rig.nodes['node4']
# simple path to each of the Test Equipment ((remove the ones that aren't needed)
# mrv = rig.devices['MRV']
matrix = rig.devices['MATRIX']
ss = rig.devices['SPIRENT']
# logging - start of test script and other basic info
start_sw_version = ctr1.get_sw_version() # rig.nodes['node1'].get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter("DVTA-CT-8", "T007", "Verify that the RF Monitoring features are available via the CraftTool") # testcase ID, Topology Used, Test Case Description
# results = ExcelWriter()
# Initialize the required libraries
util = utils()
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which is not testable items
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# Initialize Webgui
wg = webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms = check_alarms(wg)
print_alarms(startalarms)
# check that we have a working rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info('Spirent connection confirmed ... continuing with test script')
else:
# if no RF link stop script
logging.error('Spirent connection has not been established correctly after 3 attempts.')
end_script('error', results, rig, start_time, wg, ss)
# Start a spirent outage run for outage capture
ss.simspir_start_outage_run('3/9', '3/10')
logging.info('Starting Spirent Traffic for outage capture')
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info("Currently loaded Software Pack is %s. Loading the latest test build - %s." % (curr_sw_version, test_sw_vers))
swpack = load_SWpack(os.path.join(test_sw_vers), wg)
if swpack[0] and swpack[2]:
# Successful downgrade - send results and clear spirent counters
results.set_verify("LOG", util.gframe(), "%s has been upgraded to the latest test build %s" % (ctr2.name, test_sw_vers))
results.set_verify("LOG", util.gframe(), 'RF Outage during downgrade was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
else:
# Unsuccessful downgrade - send results and end script safely
results.set_verify("ERROR", util.gframe(), "%s has NOT been upgraded to the latest test build %s for unknown reasons" % (ctr2.name, test_sw_vers))
end_script('error', results, rig, start_time, wg, ss)
## ========== Test step flow ==========
## ========== Step 1 ==========
# Capture RF performance results from RF link
# Open webgui and capture results
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
time.sleep(5)
wg.webgui_set_page('Statistics', 'Radio Link')
time.sleep(5)
rflinkstats = wg.webgui_stat_get_radio_links()
uplink = rflinkstats['Radio Interface 1/3/1']
logging.info(uplink)
results.set_verify("VALUE", util.gframe(), [['BER', uplink['Current BER']], ['Remote RSL', uplink['Remote RSL']], ['Remote SNR', uplink['Remote SNR']],
['Local RSL', uplink['Local RSL']], ['Local SNR', uplink['Local SNR']], ['Tx Power', uplink['Tx Power']]])
# extract local RSL
initialRSL = rflinkstats['Radio Interface 1/3/1']['Local RSL'][:-3]
## ========== Step 2 ==========
# fade link by 10dB
matrix.set_att(11, 10)
## ========== Step 3 ==========
# capture new results and ensure that they are different from the initial ones
change_expected = True
for x in range(5):
rflinkstats = wg.webgui_stat_get_radio_links()
uplink = rflinkstats['Radio Interface 1/3/1']
logging.info(uplink)
results.set_verify("VALUE", util.gframe(), [['BER', uplink['Current BER']], ['Remote RSL', uplink['Remote RSL']], ['Remote SNR', uplink['Remote SNR']],
['Local RSL', uplink['Local RSL']], ['Local SNR', uplink['Local SNR']], ['Tx Power', uplink['Tx Power']]])
# extract local RSL
finalRSL = rflinkstats['Radio Interface 1/3/1']['Local RSL'][:-3]
if float(finalRSL) <= float(initialRSL) - 9:
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "Radio Link Statistics are working as expected ")
change_expected = False
break
else:
time.sleep(1)
if change_expected:
results.set_verify("FAIL", util.gframe(), "There was no change in Local RSL")
# check alarms on webgui (assumes webgui is open)
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 4 ==========
# go to the radio link performance page and capture the current RSL
wg.webgui_set_page('Statistics', 'Radio Link Performance')
time.sleep(5)
curRSL = wg.webgui_rlp_get_rsl('Radio Interface 1/3/1')
time.sleep(2)
# check that the RSL value is the same as the one captured just before
if float(curRSL) <= float(finalRSL) + 1 and float(curRSL) >= float(finalRSL) - 1:
results.set_verify("PASS", util.gframe(), "The RSL displayed on the Radio Link Performance page is within 1dB of previously recorded values as expected")
else:
results.set_verify("FAIL", util.gframe(), "The RSL displayed on the Radio Link Performance page is NOT within 1dB of previously recorded values")
# unfade link by 10dB
matrix.set_att(11, 0)
time.sleep(5)
wg.webgui_set_page('Statistics', 'Radio Link Performance')
time.sleep(5)
endRSL = wg.webgui_rlp_get_rsl('Radio Interface 1/3/1')
time.sleep(2)
if float(endRSL) >= float(curRSL) + 9:
results.set_verify("PASS", util.gframe(), "The RSL displayed on the Radio Link Performance page has changed to the expected value")
else:
results.set_verify("FAIL", util.gframe(), "The RSL displayed on the Radio Link Performance page has NOT changed to the expected value")
## ========== Step 5 ==========
# go to the sensors page and capture all information
wg.webgui_set_page('Status', 'Sensors')
time.sleep(5)
firstsensors = wg.webgui_sensor_get_info()
logging.info(firstsensors)
time.sleep(2)
if 'FAN Tray 1/1' in firstsensors:
results.set_verify("PASS", util.gframe(), "Sensors Page is displaying information as expected")
else:
results.set_verify("FAIL", util.gframe(), "Sensors Page is NOT displaying information as expected")
## ========== Step 6 ==========
# wait several seconds and then ensure results have changed
secondsensors = wg.webgui_sensor_get_info()
logging.info(secondsensors)
if not firstsensors == secondsensors:
results.set_verify("PASS", util.gframe(), "Sensors Page is updating the information as expected")
else:
results.set_verify("FAIL", util.gframe(), "Sensors Page is NOT updating the information as expected")
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
# run the end script
end_script('Normal', results, rig, start_time, wg, ss)
quit()
def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = testrig.TestRig(
"DVTA-CT-5", "T008.ini", "C001.ini", developmentrig, False
) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
# logging - start of test script and other basic info
start_sw_version = ctr1.get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter(
"DVTA-CT-1", "T007",
"Basic Software Loading and Configuration functions of CraftTool"
) # testcase ID, Topology Used, Test Case Description
# results = ExcelWriter()
# Initialize the required libraries
util = utils()
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which is not testable items
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# Initialize Webgui
wg = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms = check_alarms(wg)
print_alarms(startalarms)
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info(
"Currently loaded Software Pack is %s. Loading the latest test build - %s."
% (curr_sw_version, test_sw_vers))
swpack = load_SWpack(os.path.join(test_sw_vers), wg)
if swpack[0] and swpack[2]:
# Successful downgrade - send results and clear spirent counters
results.set_verify(
"LOG", util.gframe(),
"%s has been upgraded to the latest test build %s" %
(ctr1.name, test_sw_vers))
else:
# Unsuccessful downgrade - send results and end script safely
results.set_verify(
"ERROR", util.gframe(),
"%s has NOT been upgraded to the latest test build %s for unknown reasons"
% (ctr1.name, test_sw_vers))
end_script('error', results, rig, start_time, wg)
wg.webgui_logoff()
wg.webgui_close_connection()
## ========== Test step flow ==========
## ========== Step 1 to 3 ==========
# Connect to Node with Chrome, IE and Firefox and ensure correct Host and User name are displayed - check that progress indicator is "available"
browsers = ['Chrome', 'IE', 'Firefox']
for brow in browsers:
# open new browser window
wgbr = ctr8500_webgui.webgui(ctr1.ipaddress, brow)
wgbr.webgui_logon()
time.sleep(1)
# check for progress indicator
if wgbr.webgui_progress_indicator():
logging.info(
'Progress Indicator was shown before page load was completed as expected'
)
results.set_verify(
"PASS", util.gframe(),
"Progress Indicator was shown before page load was completed as expected"
)
else:
logging.info(
'Progress Indicator was NOT shown during the capture time')
results.set_verify(
"LOG", util.gframe(),
"Progress Indicator was NOT shown during the capture time")
try:
# check for correct CTR Host Name and User Name
if wgbr.webgui_systeminfo_get_nodename() == 'CTR8540-211':
if wgbr.webgui_systeminfo_get_username() == 'root':
# Successful test condition - send results and clear spirent counters
results.set_verify(
"PASS", util.gframe(),
"Successful Logon to CTR8540-211 via the %s web browser. Host and User Name were displayed correctly"
% brow)
else:
results.set_verify(
"FAIL", util.gframe(),
"Successful Logon to CTR8540-211 via the %s web browser. However, User Name was not displayed correctly"
% brow)
else:
results.set_verify(
"FAIL", util.gframe(),
"Successful Logon to CTR8540-211 via the %s web browser. However, Host Name was not displayed correctly"
% brow)
except:
results.set_verify(
"FAIL", util.gframe(),
"UnSuccessful Logon to CTR8540-211 via the %s web browser." %
brow)
end_script('error', results, rig, start_time, wg)
# logoff and close browser
wgbr.webgui_logoff()
wgbr.webgui_close_connection()
## ========== Step 4 - 5 ==========
# STEP 4 -Connect to Node with 4 separate Browsers (should be able to log into 4)
logincount = 0
# LOGIN 1 - IE
wg1 = ctr8500_webgui.webgui(ctr1.ipaddress, 'IE')
wg1.webgui_logon()
time.sleep(1)
if wg1.webgui_check_login_error() == 'Logged In':
logincount += 1
# LOGIN 2 - Firefox 1
wg2 = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg2.webgui_logon()
time.sleep(1)
if wg2.webgui_check_login_error() == 'Logged In':
logincount += 1
# LOGIN 3 - Firefox 2
wg3 = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg3.webgui_logon()
time.sleep(1)
if wg3.webgui_check_login_error() == 'Logged In':
logincount += 1
# LOGIN 4 - Firefox 3
wg4 = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg4.webgui_logon()
time.sleep(1)
if wg4.webgui_check_login_error() == 'Logged In':
logincount += 1
if logincount == 4:
results.set_verify(
"PASS", util.gframe(),
"Successfully logged into %s 4 times via browser" % ctr1.name)
else:
results.set_verify(
"FAIL", util.gframe(),
"Unsuccessfully logged into %s 4 times via browser. Only %s logins were successful"
% (ctr1.name, str(logincount)))
## ========== Step 5 ==========
# Try to connect with a fifth browser and ensure user is not allowed access
# LOGIN 5 - Firefox 4
rejectuser = True
wg5 = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg5.webgui_logon()
time.sleep(1)
if wg5.webgui_check_login_error() == 'Logged In':
rejectuser = False
wg5.webgui_logoff()
wg5.webgui_close_connection()
if rejectuser:
results.set_verify(
"PASS", util.gframe(),
"5th Login Attempt to %s was unsuccessful as expected." %
ctr1.name)
else:
results.set_verify(
"FAIL", util.gframe(),
"5th Login Attempt to %s was Successful. Should of been rejected" %
(ctr1.name, str(logincount)))
## ========== Step 6 ==========
# Edit Host name on one browser and ensure (once a refresh is done) that the name change is now shown on all browsers correctly
teststr = 'DTVA-UI-Test'
wg4.webgui_set_page("System Configuration", "System Information")
time.sleep(10)
wg4.webgui_systeminfo_nodename(teststr)
time.sleep(5)
nodenamecheck = 0
for wnode in [wg1, wg2, wg3]:
wnode.webgui_refresh()
if wnode.webgui_systeminfo_get_nodename() == teststr:
nodenamecheck += 1
if nodenamecheck == 3:
results.set_verify(
"PASS", util.gframe(),
"The Host Name change has been distributed correctly to all logged in users on %s"
% ctr1.name)
else:
results.set_verify(
"FAIL", util.gframe(),
"The Host Name change has not been successfully executed on %s" %
ctr1.name)
wg4.webgui_set_page("System Configuration", "System Information")
time.sleep(5)
wg4.webgui_systeminfo_nodename('CTR8540-211')
time.sleep(5)
## ========== Step 7 ==========
# Try to connect via CLI (should work and change host name)
# Try to log on to the node via the CLI - and set a new node name
if ctr1.sendcli(['c t', 'set switch-name ' + teststr]) == '':
results.set_verify(
"PASS", util.gframe(),
"With 4 logged on webgui users, connection was still possible on %s via CLI"
% ctr1.name)
time.sleep(5)
else:
results.set_verify(
"FAIL", util.gframe(),
"With 4 logged on webgui users, connection was NOT possible on %s via CLI"
% ctr1.name)
# check that this test node name has been distributed to all logged on users
nodenamecheck = 0
for wnode in [wg1, wg2, wg3, wg4]:
wnode.webgui_refresh()
if wnode.webgui_systeminfo_get_nodename() == teststr:
nodenamecheck += 1
if nodenamecheck == 4:
results.set_verify(
"PASS", util.gframe(),
"The Host Name change has been distributed correctly from CLI to all logged in users on %s"
% ctr1.name)
else:
results.set_verify(
"FAIL", util.gframe(),
"The Host Name change has not been successfully executed from CLI on %s"
% ctr1.name)
# change node name back to default name
wg4.webgui_set_page("System Configuration", "System Information")
wg4.webgui_systeminfo_nodename('CTR8540-211')
time.sleep(5)
## ========== Step 8 ==========
# close all browsers
for wnode in [wg4, wg3, wg2, wg1]:
wnode.webgui_logoff()
wnode.webgui_close_connection()
## ========== Step 9 ==========
# Log in as Guest and check that editing ability is not available
# set the list of pages to check
pagelist = [["System Configuration", "System Information"],
["System Configuration", "Date & Time"],
["System Configuration", "PoE Configuration"],
["System Configuration", "Backup Power"],
["Ethernet Configuration", "Port Manager"],
["Radio Configuration", "Radio Link Configuration"],
["TDM Configuration", "Tributary Diagnostics"]]
# the list of expected outcomes
setlist = [["System Information", 0], ["Date & Time", 0],
["PoE Configuration", 0], ["Backup Power", 0],
["Port Manager", 0], ["Radio Link Configuration", 0],
["Tributary Diagnostics", 0]]
wg1 = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg1.webgui_logon('guest', 'guest123')
time.sleep(5)
inputlist = wg1.webgui_guestuser_check(pagelist)
if inputlist == setlist:
results.set_verify(
"PASS", util.gframe(),
"The Guest User was restricted in the configuration of %s as expected"
% ctr1.name)
else:
results.set_verify(
"FAIL", util.gframe(),
"The Guest User was able to configure parts of %s they are not authorised to"
% ctr1.name)
wg1.webgui_logoff()
wg1.webgui_close_connection()
## ========== Step 10 ==========
# Try connecting via https
wgs = ctr8500_webgui.webgui('https://' + ctr1.ipaddress, 'Firefox')
wgs.webgui_logon()
time.sleep(5)
if wgs.webgui_check_login_error() == 'Logged In':
results.set_verify(
"PASS", util.gframe(),
"Successful entry into %s via a secure path (https)" % ctr1.name)
else:
results.set_verify(
"FAIL", util.gframe(),
"Unsuccessful entry into %s via a secure path (https)" % ctr1.name)
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
# Nothing to rollback
# run the end script
end_script('Normal', results, rig, start_time, wgs)
quit()
# # Template test script.
#
# Copyright 2014 Aviat Networks
import os
import sys
import time
import logging
from components.device.testrig1 import TestRig
from lib.xmlwriter import xmlwriter
from components.common.utils import utils
VERSION = '0.1'
util = utils()
def test_template():
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig("fade_unfade", "T001.ini",
"testrig.ini") # testcase ID, topology filename,
# simple path to each of the Nodes
ctr1 = rig.nodes['node1'].plugin[4]
ctr2 = rig.nodes['node2']
rac1 = ctr1.plugin[4]
rac2 = ctr2.plugin[3]
rac1_if = rac1.interface[1]
rac2_if = rac2.interface[1]
def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig(
"DVTA-CT-7-D", "T009.ini", "C003.ini", developmentrig, True
) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
ctr2 = rig.nodes['node2']
# ctr3 = rig.nodes['node3']
# ctr4 = rig.nodes['node4']
# simple path to each of the Test Equipment ((remove the ones that aren't needed)
# mrv = rig.devices['MRV']
matrix = rig.devices['MATRIX']
ss = rig.devices['SPIRENT']
# logging - start of test script and other basic info
start_sw_version = ctr1.get_sw_version(
) # rig.nodes['node1'].get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter(
"DVTA-CT-7-C", "T009",
"Basic Software Loading and Configuration functions of CraftTool"
) # testcase ID, Topology Used, Test Case Description
# results = ExcelWriter()
# Initialize the required libraries
util = utils()
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which is not testable items
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms = check_alarms(ctr1.ipaddress)
print_alarms(startalarms)
# Initialize Webgui
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info(
"Currently loaded Software Pack is %s. Loading the latest test build - %s."
% (curr_sw_version, test_sw_vers))
swpack = load_SWpack(os.path.join(test_sw_vers), wg)
if swpack[0] and swpack[2]:
# Successful downgrade - send results and clear spirent counters
results.set_verify(
"LOG", util.gframe(),
"%s has been upgraded to the latest test build %s" %
(ctr1.name, test_sw_vers))
results.set_verify(
"LOG", util.gframe(),
'RF Outage during downgrade was %s milliseconds' %
str(ss.simspir_get_value_outage_run()[0]))
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
else:
# Unsuccessful downgrade - send results and end script safely
results.set_verify(
"ERROR", util.gframe(),
"%s has NOT been upgraded to the latest test build %s for unknown reasons"
% (ctr2.name, test_sw_vers))
end_script('error', results, rig, start_time, wg, ss)
quit()
## ========== Test step flow ==========
## ========== Step 1 ==========
# adjust the individual RF Links for -45dBm RSL
logging.info('adjust the individual RF Links for -45dBm RSL')
rslattens = []
# A. set each link to -45dBm RSL and capture this value for future reference
for rfint in [['1/3/1', 11], ['1/3/2', 21]]:
wgrsl = webgui(ctr2.ipaddress, 'Firefox')
wgrsl.webgui_logon()
time.sleep(5)
wgrsl.webgui_set_page('Radio Configuration',
'Radio Link Configuration')
time.sleep(2)
wgrsl.webgui_rf_set_radio_int('RADIO INT ' + rfint[0])
time.sleep(2)
if set_matrix(wgrsl, matrix, rfint[1]):
rslattens.append(matrix.get_att(rfint[1]))
else:
logging.error(
'RSL has not been set to -45dBm correctly of RADIO INT %s. Quitting testscript'
% rfint[0])
end_script('error', results, rig, start_time, wgrsl, ss)
quit()
wgrsl.webgui_logoff()
wgrsl.webgui_close_connection()
# B. send traffic on these ports and check for correct link
logging.info('Checking RF Paths are still connected as expected')
# check that we have a working primary rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info(
'Spirent connection confirmed for Primary RF Link ... continuing with test script'
)
else:
# if no RF link stop script
logging.error(
'Spirent connection has not been established correctly after 3 attempts.'
)
end_script('error', results, rig, start_time, wg, ss)
quit()
# send traffic down secondary Link
ctr1.sendcli('c t; vlan 1; no ports ra 4/1 untagged ra 4/1')
ctr1.sendcli('c t; vlan 1; ports add ra 4/2 untagged ra 4/2')
ctr2.sendcli('c t; vlan 1; no ports ra 3/1 untagged ra 3/1')
ctr2.sendcli('c t; vlan 1; ports add ra 3/2 untagged ra 3/2')
ctr2.sendcli('c t; int gi 0/1; spanning-tree disable; end')
# check that we have a working primary rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info(
'Spirent connection confirmed for Secondary RF Link ... continuing with test script'
)
else:
# if no RF link stop script
logging.error(
'Spirent connection has not been established correctly after 3 attempts.'
)
end_script('error', results, rig, start_time, wg, ss)
quit()
# send traffic down primary Link
ctr1.sendcli('c t; vlan 1; no ports ra 4/2 untagged ra 4/2')
ctr1.sendcli('c t; vlan 1; ports add ra 4/1 untagged ra 4/1')
ctr2.sendcli('c t; vlan 1; no ports ra 3/2 untagged ra 3/2')
ctr2.sendcli('c t; vlan 1; ports add ra 3/1 untagged ra 3/1')
ctr2.sendcli('c t; int ra 3/1; spanning-tree disable; end')
# C. check to see whether any new alarms have been raised
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms != currentalarms:
print_alarms(currentalarms)
logging.error('Differences in alarms have been found, not as expected')
end_script('error', results, rig, start_time, wg, ss)
quit()
else:
logging.info('No Alarms have been raised ... as expected')
## ========== Step 2 ==========
# Set MATRIX to a XPIC Configuration
logging.info('Set MATRIX to a XPIC Configuration')
matrix.set_xpic()
## ========== Step 3 ==========
# Create a XPIC RF Link
logging.info('Create a XPIC RF Link')
for ctr in [ctr1, ctr2]:
logging.info('Setting XPIC config on %s' % ctr.name)
wgxpic = webgui(ctr.ipaddress, 'Firefox')
wgxpic.webgui_logon()
time.sleep(5)
wgxpic.webgui_set_page('Radio Configuration',
'Radio Link Configuration')
time.sleep(2)
wgxpic.webgui_rf_set_xpic(True)
time.sleep(2)
wgxpic.webgui_apply()
time.sleep(2)
wgxpic.webgui_logoff()
wgxpic.webgui_close_connection()
## ========== Step 4 ==========
# Check that XPIC is displayed correctly
logging.info('Check that XPIC is displayed correctly')
wgxpic2 = webgui(ctr1.ipaddress, 'Firefox')
wgxpic2.webgui_logon()
time.sleep(5)
wgxpic2.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(2)
if wgxpic2.webgui_rf_is_xpic_set():
results.set_verify("PASS", util.gframe(),
'CTR Portal is displaying XPIC as expected')
else:
results.set_verify("FAIL", util.gframe(),
'CTR Portal is NOT displaying XPIC as expected')
wgxpic2.webgui_logoff()
wgxpic2.webgui_close_connection()
## ========== Step 5 ==========
# Ensure that traffic flows on both paths and no alarms or errors are recorded
logging.info(
'Ensure that traffic flows on both paths and no alarms or errors are recorded'
)
# setup vlans to send traffic down vertical Link only
ctr1.sendcli('c t; vlan 1; no ports')
ctr1.sendcli('c t; vlan 1; ports add gi 0/2 ra 4/1 untagged gi 0/2 ra 4/1')
ctr1.sendcli('sh vlan')
ctr2.sendcli('c t; vlan 1; no ports')
ctr2.sendcli('c t; vlan 1; ports add gi 0/2 ra 3/1 untagged gi 0/2 ra 3/1')
ctr2.sendcli('sh vlan')
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
results.set_verify(
"PASS", util.gframe(),
'Spirent connection confirmed for Vertical XPIC RF Link ... continuing with test script'
)
else:
# if no RF link stop script
results.set_verify(
"FAIL", util.gframe(),
'Spirent connection has not been confirmed for the Vertical XPIC RF Link correctly after 3 attempts.'
)
# setup vlans to send traffic down vertical Link only
ctr1.sendcli('c t; vlan 1; no ports')
ctr1.sendcli('c t; vlan 1; ports add gi 0/2 ra 4/2 untagged gi 0/2 ra 4/2')
ctr1.sendcli('sh vlan')
ctr2.sendcli('c t; vlan 1; no ports')
ctr2.sendcli('c t; vlan 1; ports add gi 0/2 ra 3/2 untagged gi 0/2 ra 3/2')
ctr2.sendcli('sh vlan')
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
results.set_verify(
"PASS", util.gframe(),
'Spirent connection confirmed for Horizontal XPIC RF Link ... continuing with test script'
)
else:
# if no RF link stop script
results.set_verify(
"FAIL", util.gframe(),
'Spirent connection has not been confirmed for the Horizontal XPIC RF Link correctly after 3 attempts.'
)
# check alarmson webgui (assumes webgui is open)
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms == currentalarms:
results.set_verify("PASS", util.gframe(), 'Alarms are as expected.')
print_alarms(currentalarms)
else:
results.set_verify("FAIL", util.gframe(), 'Alarms are NOT as expected')
## ========== Step 6 ==========
# Check that the XPD on BNC is available and selectable
wgxpd = webgui(ctr1.ipaddress, 'Firefox')
wgxpd.webgui_logon()
time.sleep(5)
wgxpd.webgui_set_page('Radio Configuration', 'Radio Link Diagnostics')
time.sleep(5)
wgxpd.webgui_rf_set_xpd_bnc_dura('1/4/1', True)
time.sleep(15)
## ========== Step 7 ==========
# Ensure Alarm is raised then remove XPD on BNC
xpd_alarm_chk = check_alarms(ctr1.ipaddress)
alarmfound = False
print_alarms(xpd_alarm_chk)
for al in xpd_alarm_chk:
for x in al:
if 'XPD output on BNC' in x:
results.set_verify("PASS", util.gframe(),
'The expected XPD on BNC alarm was raised')
alarmfound = True
if not alarmfound:
results.set_verify("FAIL", util.gframe(),
'The expected XPD on BNC alarm was NOT raised')
wgxpd.webgui_rf_set_xpd_bnc_dura('1/4/1', False)
time.sleep(5)
wgxpd.webgui_logoff()
wgxpd.webgui_close_connection()
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
# run the end script
end_script('Normal', results, rig, start_time, wg, ss)
quit()
def sw_management():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
results = xmlwriter("DVTA-CT-1", "T007", "Basic Software Loading and Configuration functions of CraftTool") # testcase ID, Topology Used, Test Case Description
rig = TestRig("DVTA-CT-1", "T008.ini", "C001.ini", developmentrig, True) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
ss = rig.devices['SPIRENT']
start_sw_version = ctr1.get_sw_version()
# logging - start of test script and other basic info
start_time = time.time()
logging.info('START %s, version %s' % (sw_management.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
# results = xmlwriter.__init__("DVTA-CT-1", "T007", "Basic Software Loading and Configuration functions of CraftTool") # testcase ID, Topology Used, Test Case Description
# Initialize the required libraries
util = utils()
# set the software pack variables
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
GA_sw_dir = "C:/GA_swpack/" # GA swpack directory
faulty_sw_dir = "C:/swpack_faulty/" # faulty swpack directory
sw_repos = "http://192.168.77.1/CTR8540/swpacks/" + util.format_swpack_dir(test_sw_vers) # swpack remote repository
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
## ========== Pre-Flow setup and checks ==========
#
# Initialize Webgui
wg = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms = check_alarms(wg)
print_alarms(startalarms)
# check that we have a working rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'):
logging.info('Spirent connection confirmed ... continuing with test script')
else:
logging.error('Spirent connection has not been established correctly after 3 attempts.')
end_script('error', results, rig, start_time, wg, ss)
# Start a spirent outage run
ss.simspir_start_outage_run('3/9', '3/10')
logging.info('Starting Spirent Traffic for outage capture')
## ========== Test step flow ==========
## ========== Step 1 ==========
# Check that the GA software version is loaded, if not reload it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(GA_sw_dir, curr_sw_version)):
logging.info("Currently loaded Software Pack is not the latest GA release. Loading GA Release.")
gaswpack = load_SWpack(os.path.join(GA_sw_dir, os.listdir(GA_sw_dir)[0]), wg)
if gaswpack[0]:
# Successful downgrade - send results and clear spirent counters
results.set_verify("LOG", util.gframe(), "%s has been downgraded to GA release %s" % (ctr1.name, os.listdir(GA_sw_dir)[0]))
results.set_verify("LOG", util.gframe(), 'RF Outage during downgrade was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
wg = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
else:
# Unsuccessful downgrade - send results and end script safely
results.set_verify("ERROR", util.gframe(), "%s has NOT been downgraded to GA release %s for unknown reasons" % (ctr1.name, os.listdir(GA_sw_dir)[0]))
end_script('error', results, rig, start_time, wg, ss)
# clear spirent counters and check alarms
ss.simspr_clear_counters()
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 2 ==========
# Ensure Transfer Error is raised if a faulty swpack is set to be downloaded
if load_SWpack(os.path.join(faulty_sw_dir, os.listdir(faulty_sw_dir)[0]), wg) == "Transfer Error":
# Successful catch of faulty swpack - send results and report and clear spirent results if required
results.set_verify("PASS", util.gframe(), "%s has rejected the faulty swpack - Tranfer Error raised as expected" % ctr1.name)
droppedframes = ss.simspir_get_value_outage_run()[0]
if droppedframes != 0:
results.set_verify("LOG", util.gframe(), 'ISSUE: RF Outage during downgrade was %s milliseconds' % str(droppedframes))
else:
# Unsuccessful catch of faulty swpack - send results
results.set_verify("FAIL", util.gframe(), "%s has NOT rejected the faulty swpack as expected" % ctr1.name)
wg.webgui_close_connection()
time.sleep(5)
wg = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
# clear spirent counters and check alarms
ss.simspr_clear_counters()
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 3 ==========
# Ensure upgrading to current Swpack is available from the remote repository using a delayed activation time of 4 mins
reposload = load_SWpack(sw_repos + test_sw_vers, wg, "T", 4)
if reposload[0]:
if reposload[1] and reposload[2]:
# Successful upgrade of swpack after a delayed start - send results and report and clear spirent results
results.set_verify("PASS", util.gframe(), "%s has been upgraded to %s from the remote repository with a delayed activation time set" % (ctr1.name, test_sw_vers))
results.set_verify("LOG", util.gframe(), 'RF Outage during upgrade was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
else:
# Successful upgrade BUT delayed time did not work - send results but carry on
results.set_verify("FAIL", util.gframe(), "%s has upgraded to %s from the remote repository. However the delayed activation time did not work" % (ctr1.name, test_sw_vers))
else:
# Unsuccessful upgrade from repository - send results and end script safely
results.set_verify("FAIL", util.gframe(), "%s has NOT been upgraded to %s from the remote repository with a delayed activation time set" % (ctr1.name, test_sw_vers))
end_script('error', results, rig, start_time, wg, ss)
wg = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
# clear spirent counters and check alarms
ss.simspr_clear_counters()
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 4 ==========
# Rollback sw to GA version
wg.webgui_set_page("System Configuration", "Software Management", "Admin")
rollback = wg.webgui_sw_rollback()
if 'PASS' in rollback:
if check_sw_vers(os.path.join(GA_sw_dir, os.listdir(GA_sw_dir)[0]), ctr1.ipaddress):
# successful rollback - send results and report and clear spirent results
rollback.replace("PASS - ", "")
results.set_verify("PASS", util.gframe(), rollback)
results.set_verify("LOG", util.gframe(), 'RF Outage during rollback was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
else:
rollback.replace("FAIL - ", "")
results.set_verify("FAIL", util.gframe(), "Unsuccessfull rollback to GA swpack is not actively set to the GA build")
else:
# Unsuccessful rollback of software - send results and try to carry on
rollback.replace("FAIL - ", "")
results.set_verify("FAIL", util.gframe(), "Unsuccessfull rollback to GA swpack due to %s" % rollback)
wg.webgui_close_connection()
time.sleep(5)
wg = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
# clear spirent counters and check alarms
ss.simspr_clear_counters()
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 5 ==========
# Upgrade sw to Testable version via Local file using Transfer and Activate method
if load_SWpack(os.path.join(test_sw_dir, test_sw_vers), wg)[0]:
# Successful Upgrade to current Software version - send results and report and clear spirent results
results.set_verify("PASS", util.gframe(), "%s has been upgraded to Current Build release %s" % (ctr1.name, test_sw_vers))
results.set_verify("LOG", util.gframe(), 'RF Outage during upgrade was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
else:
# Unsuccessful upgrade of software - send results and try to carry on
results.set_verify("FAIL", util.gframe(), "Unsuccessfull rollback to GA swpack due to %s" % test_sw_vers)
wg = ctr8500_webgui.webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
# clear spirent counters and check alarms
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Test Step rollback ==========
# No major rollback of settings required
# run the end script
end_script('Normal', results, rig, start_time, wg, ss)
quit()
def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig(
"DVTA-CT-2", "T008.ini", "C001.ini", developmentrig, False
) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
# simple path to each of the Test Equipment ((remove the ones that aren't needed)
ss = rig.devices['SPIRENT']
# logging - start of test script and other basic info
start_sw_version = ctr1.get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter(
"DVTA-CT-2", "T008",
"Verify the Configuration Functions of CraftTool as well as the Revert/Restore Timer"
) # testcase ID, Topology Used, Test Case Description
# Initialize the required libraries
util = utils()
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which is not testable items
# 1. Ensure Testrig is correctly setup with no alarms present (NOTE: compare results after each step)
# 2. Start a spirent run to calculate outage times (NOTE: gather results after each step)
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
test_dl_dir = "C:/ctrdownloads/" # the desired test sw dir
faulty_dir = "C:/config_faulty/"
sw_repos = "192.168.77.1/CTR8540/config/"
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# Initialize Webgui
wg = webgui(ctr1.ipaddress, 'Firefox', True)
wg.webgui_logon()
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms = check_alarms(wg)
print_alarms(startalarms)
# check that we have a working rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info(
'Spirent connection confirmed ... continuing with test script')
else:
# if no RF link stop script
logging.error(
'Spirent connection has not been established correctly after 3 attempts.'
)
end_script('error', results, rig, start_time, wg, ss)
# Start a spirent outage run for outage capture
ss.simspir_start_outage_run('3/9', '3/10')
logging.info('Starting Spirent Traffic for outage capture')
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info(
"Currently loaded Software Pack is %s. Loading the latest test build - %s."
% (curr_sw_version, test_sw_vers))
swpack = load_SWpack(os.path.join(test_sw_vers), wg)
if swpack[0] and swpack[2]:
# Successful downgrade - send results and clear spirent counters
results.set_verify(
"LOG", util.gframe(),
"%s has been upgraded to the latest test build %s" %
(ctr1.name, test_sw_vers))
results.set_verify(
"LOG", util.gframe(),
'RF Outage during downgrade was %s milliseconds' %
str(ss.simspir_get_value_outage_run()[0]))
wg = webgui(ctr1.ipaddress, 'Firefox')
wg.webgui_logon()
else:
# Unsuccessful downgrade - send results and end script safely
results.set_verify(
"ERROR", util.gframe(),
"%s has NOT been upgraded to the latest test build %s for unknown reasons"
% (ctr1.name, test_sw_vers))
end_script('error', results, rig, start_time, wg, ss)
## ========== Test step flow ==========
## ========== Step 1 ==========
# Backup the current configuration to file and ensure this was done correctly.
# start by ensuring the current config is correct
wg.webgui_set_page("System Configuration", "System Information")
wg.webgui_systeminfo_nodename('CTR8540-211')
wg.webgui_config_save()
time.sleep(10)
configfile = True
wg.webgui_set_page("System Configuration", "Configuration Management",
"Admin")
# Create backup file and ensure file has been placed in the ctrdownloads folder
logging.info("Backup Current Configuration and Check file correct")
if wg.webgui_config_backup():
results.set_verify(
"PASS", util.gframe(),
"aos.conf file was succcessfully saved to download folder")
# wait till the file is available
time.sleep(10)
while not os.path.exists(os.path.join(test_dl_dir, 'aos.conf')):
time.sleep(5)
# check to ensure this file is actually the correct one
if ctr1.ipaddress in open(os.path.join(test_dl_dir,
'aos.conf')).read():
results.set_verify(
"PASS", util.gframe(),
"aos.conf contained the correct ipaddress for this Node")
else:
results.set_verify(
"FAIL", util.gframe(),
"aos.conf did NOT contain the correct ipaddress for this Node")
configfile = False
else:
results.set_verify(
"FAIL", util.gframe(),
"aos.conf file was NOT succcessfully saved to download folder")
configfile = False
## ========== Step 2 ==========
# Change some obvious settings and commit
# only do this step if the config file had been saved successfully before
restoreconfig = False
if configfile:
logging.info("Change Node Name for config restore reference")
# change the name of the ctr and save configuration
wg.webgui_set_page("System Configuration", "System Information")
if wg.webgui_systeminfo_nodename('CONFIG-TEST'):
wg.webgui_config_save()
results.set_verify(
"PASS", util.gframe(),
"The Node Name has been successfully changed and committed")
restoreconfig = True
else:
results.set_verify(
"FAIL", util.gframe(),
"The Node Name has NOT been successfully changed and committed"
)
## ========== Step 3 ==========
# Setup Revert Timer and validate correct range of time
passvalues = 0
nonrevertvalues = [20, 299, 3601, 9999]
revertvalues = [300, random.randint(301, 3599), 3600]
restorevalues = False
if restoreconfig:
logging.info("Validate Revert Timer Values - Good and Bad")
# step through all non allowable values and ensure each is correctly handled
for x in nonrevertvalues:
if wg.webgui_revert_set_timer(x):
results.set_verify(
"FAIL", util.gframe(),
"The Revert Timer accepted a value (%s) outside its parameters"
% str(x))
else:
results.set_verify(
"PASS", util.gframe(),
"The Revert Timer rejected a value (%s) outside its parameters"
% str(x))
passvalues += 1
wg.webgui_revert_disable()
# step through all allowed values (including 1 random one) and ensure it is correctly handled
for x in revertvalues:
if wg.webgui_revert_set_timer(x):
results.set_verify(
"PASS", util.gframe(),
"The Revert Timer accepted a valid value (%s) and started its run"
% str(x))
passvalues += 1
else:
results.set_verify(
"FAIL", util.gframe(),
"The Revert Timer rejected a valid value (%s)" % str(x))
wg.webgui_revert_disable()
if passvalues == 7:
results.set_verify(
"PASS", util.gframe(),
"The Revert Timer accepted all valid values and rejected all invalid values"
)
restorevalues = True
else:
results.set_verify(
"FAIL", util.gframe(),
"The Revert Timer correctly handled %s values, but incorrectly handled %s values"
% (str(passvalues), str(7 - passvalues)))
## ========== Step 4 ==========
# checks to see whether the config load will handle a load with no revert Timer
configwarn = False
if restorevalues:
logging.info("Config File Restore - No Revert Timer Warning Check")
wg.webgui_set_page("System Configuration", "Configuration Management",
"Admin")
reverterrorcheck = wg.webgui_config_restore(
'local', os.path.join(test_dl_dir, 'aos.conf'))
if type(reverterrorcheck) != bool:
results.set_verify("INFO", util.gframe(), reverterrorcheck)
results.set_verify(
"PASS", util.gframe(),
"The Config load error warning was displayed as expected with no revert timer set"
)
configwarn = True
else:
results.set_verify(
"FAIL", util.gframe(),
"The Config load error warning was NOT displayed with no revert timer set"
)
## ========== Step 5 ==========
# Restore config from Local File, confirm restore successful and then wait for restore timer to kick in and rollback to previous config.
if configwarn:
logging.info("Restoring Config file from Local Source")
time.sleep(5)
# config should already be loaded and ready to got so set revert timer
for x in range(3):
if wg.webgui_revert_set_timer(300):
logging.info("revert timer set and now restoring config file")
break
else:
logging.error(
"revert Timer not set correctly ... trying again")
time.sleep(2)
# Start the Configuration Restore
wg.webgui_config_restore_click()
# Wait for system reboot
time.sleep(120)
# open new window and logon
wg.webgui_close_connection()
wg2 = webgui(ctr1.ipaddress, 'Firefox', True)
wg2.webgui_logon()
# check for change in node name and remaining revert timer
nodename = wg2.webgui_systeminfo_get_nodename()
timeremaining = wg2.webgui_revert_get_time_remaining()
if "CONFIG-TEST" in nodename or timeremaining == 'Disabled':
logging.error("Configuration File has not loaded correctly")
results.set_verify(
"FAIL", util.gframe(),
"The Configuration has not been restored correctly")
else:
results.set_verify(
"PASS", util.gframe(),
"The Configuration has been restored correctly")
results.set_verify(
"LOG", util.gframe(),
'RF Outage during upgrade was %s milliseconds' %
str(ss.simspir_get_value_outage_run()[0]))
ss.simspr_clear_counters()
currentalarms = check_alarms(wg2)
if startalarms != currentalarms:
print_alarms(currentalarms)
# wait for remaining time and then check that the node reverts back
time.sleep(420)
wg2.webgui_close_connection()
wg3 = webgui(ctr1.ipaddress, 'Firefox', True)
wg3.webgui_logon()
nodename2 = wg3.webgui_systeminfo_get_nodename()
timeremaining2 = wg3.webgui_revert_get_time_remaining()
if "CONFIG-TEST" in nodename2 and timeremaining2 == 'Disabled':
results.set_verify(
"PASS", util.gframe(),
"The Revert Timer has caused the Configuration rolled back correctly"
)
results.set_verify(
"LOG", util.gframe(),
'RF Outage during upgrade was %s milliseconds' %
str(ss.simspir_get_value_outage_run()[0]))
else:
results.set_verify(
"FAIL", util.gframe(),
"The Configuration has not been rolled back correctly")
logging.error(
"The Configuration has not been rolled back correctly")
ss.simspr_clear_counters()
currentalarms = check_alarms(wg3)
if startalarms != currentalarms:
print_alarms(currentalarms)
wg3.webgui_close_connection()
## ========== Step 6 ==========
# Try to load faulty config file and ensure alarms are raised etc
wg = webgui(ctr1.ipaddress, 'Firefox', True)
wg.webgui_logon()
wg.webgui_set_page("System Configuration", "Configuration Management",
"Admin")
logging.info("Trying to load faulty Config File")
wg.webgui_revert_set_timer(300)
wg.webgui_config_restore_enter_path('local',
os.path.join(faulty_dir, 'aos.conf'))
wg.webgui_config_restore_click()
# refresh the page stop the revert timer and then check for a "checksum verification" event
time.sleep(60)
wg.webgui_refresh()
time.sleep(5)
if wg.webgui_revert_disable() == 'Disabled':
results.set_verify("PASS", util.gframe(),
"The CTR handled a faulty configuration file")
else:
results.set_verify(
"FAIL", util.gframe(),
"The CTR did NOT handle a faulty configuration file")
end_script('error', results, rig, start_time, wg, ss)
wg.webgui_set_page("Status", "Event Log")
time.sleep(5)
if wg.webgui_event_recent_check("Checksum verification failed"):
results.set_verify(
"PASS", util.gframe(),
"The CTR raised a checksum failed Event as expected")
else:
results.set_verify("FAIL", util.gframe(),
"The CTR did NOT display a checksum failed event")
wg.webgui_close_connection()
wg1 = webgui(ctr1.ipaddress, 'Firefox', True)
wg1.webgui_logon()
ss.simspr_clear_counters()
currentalarms = check_alarms(wg1)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 7 ==========
# Config Restore from a remote repository and ensure it is successful and then cancel restore timer
logging.info("Config File Restore from Remote repository")
logging.info(
"as per JIRA CSR-6154 config restore from remote repository not fix until master(14.1949)"
)
# change the node name as an update reference
wg1.webgui_set_page("System Configuration", "System Information")
if wg1.webgui_systeminfo_nodename('CONFIG-TEST'):
wg1.webgui_config_save()
# goto configuration management page and restore config from remote repository
wg1.webgui_set_page("System Configuration", "Configuration Management",
"Admin")
if wg1.webgui_config_restore('remote', sw_repos + 'dvta-ctr1.conf', 450):
nodename = wg1.webgui_systeminfo_get_nodename()
if nodename == 'CTR8540-211':
results.set_verify(
"PASS", util.gframe(),
"The CTR restored its config from a remote repository")
results.set_verify(
"LOG", util.gframe(),
'RF Outage during upgrade was %s milliseconds' %
str(ss.simspir_get_value_outage_run()[0]))
else:
results.set_verify(
"FAIL", util.gframe(),
"The CTR did NOT restore its config from a remote repository - nodename unchanged"
)
else:
results.set_verify(
"FAIL", util.gframe(),
"The CTR did NOT restore its config from a remote repository - load not successful"
)
# end_script('error', results, rig, start_time, wg1, ss)
ss.simspr_clear_counters()
currentalarms = check_alarms(wg1)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 8 ==========
# Capture Helpdesk report and ensure it is as expected
wg1.webgui_close_connection()
wg2 = webgui(ctr1.ipaddress, 'Firefox', True)
wg2.webgui_logon()
if wg2.webgui_revert_get_time_remaining() != 'Disabled':
wg2.webgui_revert_disable()
wg2.webgui_set_page('Status', 'Reports')
time.sleep(2)
if wg2.webgui_report_generate():
wg2.webgui_report_download()
time.sleep(30) # windows OS takes some time to update its listings
if os.path.exists('C:/hdtest'):
shutil.rmtree('C:/hdtest')
os.mkdir('C:/hdtest')
hdfiles = tarfile.TarFile.open(os.path.join(test_dl_dir, "helpdesk.tar"))
hdfiles.extractall('C:/hdtest')
issdir = ('C:/hdtest/tmp/helpdeskFiles/')
if 'CTR8540-211' and test_sw_vers[-14:-7] in open(
os.path.join(issdir, 'issInfo.txt')).read():
results.set_verify(
"PASS", util.gframe(),
"The %s downloaded the helpdesk file correctly" % ctr1.name)
else:
results.set_verify(
"FAIL", util.gframe(),
"The %s did NOT download the helpdesk file correctly" % ctr1.name)
shutil.rmtree('C:/hdtest')
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
## ========== Run Test End Script ==========
# run the end script
end_script('Normal', results, rig, start_time, wg2, ss)
quit()
def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig(
"DVTA-CT-7-C", "T009.ini", "C003.ini", developmentrig, True
) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
ctr1 = rig.nodes['node1']
ctr2 = rig.nodes['node2']
# ctr3 = rig.nodes['node3']
# ctr4 = rig.nodes['node4']
# simple path to each of the Test Equipment ((remove the ones that aren't needed)
# mrv = rig.devices['MRV']
matrix = rig.devices['MATRIX']
ss = rig.devices['SPIRENT']
# logging - start of test script and other basic info
start_sw_version = ctr1.get_sw_version(
) # rig.nodes['node1'].get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter(
"DVTA-CT-7-C", "T009",
"Basic Software Loading and Configuration functions of CraftTool"
) # testcase ID, Topology Used, Test Case Description
# results = ExcelWriter()
# Initialize the required libraries
util = utils()
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which is not testable items
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms = check_alarms(ctr1.ipaddress)
print_alarms(startalarms)
# Initialize Webgui
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info(
"Currently loaded Software Pack is %s. Loading the latest test build - %s."
% (curr_sw_version, test_sw_vers))
swpack = load_SWpack(os.path.join(test_sw_vers), wg)
if swpack[0] and swpack[2]:
# Successful downgrade - send results and clear spirent counters
results.set_verify(
"LOG", util.gframe(),
"%s has been upgraded to the latest test build %s" %
(ctr1.name, test_sw_vers))
results.set_verify(
"LOG", util.gframe(),
'RF Outage during downgrade was %s milliseconds' %
str(ss.simspir_get_value_outage_run()[0]))
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
else:
# Unsuccessful downgrade - send results and end script safely
results.set_verify(
"ERROR", util.gframe(),
"%s has NOT been upgraded to the latest test build %s for unknown reasons"
% (ctr2.name, test_sw_vers))
end_script('error', results, rig, start_time, wg, ss)
quit()
## ========== Test step flow ==========
## ========== Step 1 ==========
# adjust the individual RF Links for -45dBm RSL
logging.info('adjust the individual RF Links for -45dBm RSL')
rslattens = []
# A. set each link to -45dBm RSL and capture this value for future reference
for rfint in [['1/3/1', 11], ['1/3/2', 21]]:
wgrsl = webgui(ctr2.ipaddress, 'Firefox')
wgrsl.webgui_logon()
time.sleep(5)
wgrsl.webgui_set_page('Radio Configuration',
'Radio Link Configuration')
time.sleep(2)
wgrsl.webgui_rf_set_radio_int('RADIO INT ' + rfint[0])
time.sleep(2)
if set_matrix(wgrsl, matrix, rfint[1]):
rslattens.append(matrix.get_att(rfint[1]))
else:
logging.error(
'RSL has not been set to -45dBm correctly of RADIO INT %s. Quitting testscript'
% rfint[0])
end_script('error', results, rig, start_time, wgrsl, ss)
quit()
wgrsl.webgui_logoff()
wgrsl.webgui_close_connection()
# B. send traffic on these ports and check for correct link
logging.info('Checking RF Paths are still connected as expected')
# check that we have a working primary rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info(
'Spirent connection confirmed for Primary RF Link ... continuing with test script'
)
else:
# if no RF link stop script
logging.error(
'Spirent connection has not been established correctly after 3 attempts.'
)
end_script('error', results, rig, start_time, wg, ss)
quit()
# send traffic down secondary Link
ctr1.sendcli('c t; vlan 1; no ports ra 4/1 untagged ra 4/1')
ctr1.sendcli('c t; vlan 1; ports add ra 4/2 untagged ra 4/2')
ctr2.sendcli('c t; vlan 1; no ports ra 3/1 untagged ra 3/1')
ctr2.sendcli('c t; vlan 1; ports add ra 3/2 untagged ra 3/2')
ctr2.sendcli('c t; int gi 0/1; spanning-tree disable; end')
# check that we have a working primary rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info(
'Spirent connection confirmed for Secondary RF Link ... continuing with test script'
)
else:
# if no RF link stop script
logging.error(
'Spirent connection has not been established correctly after 3 attempts.'
)
end_script('error', results, rig, start_time, wg, ss)
quit()
# send traffic down primary Link
ctr1.sendcli('c t; vlan 1; no ports ra 4/2 untagged ra 4/2')
ctr1.sendcli('c t; vlan 1; ports add ra 4/1 untagged ra 4/1')
ctr2.sendcli('c t; vlan 1; no ports ra 3/2 untagged ra 3/2')
ctr2.sendcli('c t; vlan 1; ports add ra 3/1 untagged ra 3/1')
ctr2.sendcli('c t; int ra 3/1; spanning-tree disable; end')
# C. check to see whether any new alarms have been raised
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms != currentalarms:
print_alarms(currentalarms)
logging.error('Differences in alarms have been found, not as expected')
end_script('error', results, rig, start_time, wg, ss)
quit()
else:
logging.info('No Alarms have been raised ... as expected')
## ========== Step 2 ==========
# Set MATRIX to a Protected Configuration
logging.info('Set MATRIX to a Protected Configuration')
matrix.set_protected()
# A. set the "individual" links to the predetermined RSL values
attidx = 11
for attval in rslattens:
matrix.set_att(attidx, float(attval))
attidx = attidx + 10
## ========== Step 3 ==========
# Configure a Protected RF Link
logging.info('Configure a Protected RF Link')
# Set a Protected link
pri = ['1/4/1', '1/3/1']
sec = ['1/4/2', '1/3/2']
idp = 0
for ctr in [ctr1, ctr2]:
wgprot = webgui(ctr.ipaddress, 'Firefox')
wgprot.webgui_logon()
time.sleep(5)
wgprot.webgui_set_page('Radio Configuration',
'Radio Link Configuration')
time.sleep(2)
wgprot.webgui_rf_add_protection(1, pri[idp], sec[idp], 'Hot-Standby',
'Equal', ['0'], 'No Revert')
time.sleep(10)
wgprot.webgui_set_nav_tab('RADIO LINKS')
time.sleep(10)
wgprot.webgui_rf_enable_interface()
time.sleep(2)
wgprot.webgui_apply()
time.sleep(5)
wgprot.webgui_logoff()
wgprot.webgui_close_connection()
time.sleep(10)
idp = 1
time.sleep(20)
# check that the VLANs and Port connections are ready for Traffic flow
vlantext = ctr1.sendcli('show vlan')
if 'Prot1' in vlantext:
results.set_verify(
"PASS", util.gframe(),
"The Prot1 VLAN is now configured correctly and ready for traffic to flow"
)
else:
results.set_verify("FAIL", util.gframe(),
"The Prot1 VLAN is NOT configured correctly")
end_script('error', results, rig, start_time, wg, ss)
quit()
## ========== Step 4 ==========
# Check that Protection is displayed correctly
logging.info('Check that Protection is displayed correctly')
# Check for the correct Protection display on the Radio Link configuration page
wgdisp = webgui(ctr1.ipaddress, 'Firefox')
wgdisp.webgui_logon()
time.sleep(5)
wgdisp.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
if wgdisp.webgui_rf_is_prot_set():
results.set_verify(
"PASS", util.gframe(),
"The Protected RF link is now Displayed correctly, and ready for traffic to flow"
)
else:
results.set_verify("FAIL", util.gframe(),
"The Protected RF link is NOT Displayed correctly")
end_script('error', results, rig, start_time, wgdisp, ss)
quit()
time.sleep(2)
## ========== Step 5 ==========
# ensure that the Primary RFU is up and transmitting
if wgdisp.webgui_rf_is_link_up('RADIO INT 1/4/1'):
logging.info('Primary RFU is up and Transmitting')
onlinetx = 'pri'
else:
logging.info('Secondary RFU is up and Transmitting')
onlinetx = 'sec'
## ========== Step 6 ==========
# Check that the Online Tx Lock Diagnostics is working
logging.info('Checking Online Tx Lock Diagnostics')
wgdisp.webgui_set_page('Radio Configuration', 'Radio Link Diagnostics')
time.sleep(5)
wgdisp.webgui_set_nav_tab('RADIO LINK PROTECTION DIAGNOSTICS')
time.sleep(5)
if onlinetx == 'sec':
logging.info('Switching Online RFU to Primary')
wgdisp.webgui_rf_set_lock_tx_path('prot 1', True,
'Radio Interface 1/4/1 (pri)')
time.sleep(5)
wgdisp.webgui_rf_set_lock_tx_path('prot 1')
time.sleep(5)
logging.info('Switching Online RFU to Secondary for 2 minutes')
wgdisp.webgui_rf_set_lock_tx_path('prot 1', True,
'Radio Interface 1/4/2 (sec)',
'00:00:02')
time.sleep(5)
txlockalarms = check_alarms(ctr1.ipaddress)
alarmfound = False
print_alarms(txlockalarms)
for al in txlockalarms:
for x in al:
if 'transmitter lock diagnostic' in x:
results.set_verify(
"PASS", util.gframe(),
'The expected transmitter lock diagnostic alarm was raised'
)
alarmfound = True
if not alarmfound:
results.set_verify(
"FAIL", util.gframe(),
'The expected transmitter lock diagnostic alarm was NOT raised')
wgdisp.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
if wgdisp.webgui_rf_is_link_up('RADIO INT 1/4/2'):
results.set_verify(
"PASS", util.gframe(),
'The secondary RFU is now Transmitting as expected')
else:
results.set_verify(
"FAIL", util.gframe(),
'The Primary RFU is still Transmitting NOT as expected')
# wait 2 minutes then check to see that alarm has dropped
time.sleep(120)
txlockalarms = check_alarms(ctr1.ipaddress)
alarmfound = False
print_alarms(txlockalarms)
for al in txlockalarms:
for x in al:
if 'transmitter lock diagnostic' in x:
results.set_verify(
"FAIL", util.gframe(),
'The transmitter lock diagnostic alarm was still raised')
alarmfound = True
if not alarmfound:
results.set_verify(
"PASS", util.gframe(),
'The transmitter lock diagnostic alarm was dropped as expected')
# switch back to Primary RFU
wgdisp.webgui_set_page('Radio Configuration', 'Radio Link Diagnostics')
time.sleep(5)
wgdisp.webgui_set_nav_tab('RADIO LINK PROTECTION DIAGNOSTICS')
time.sleep(5)
wgdisp.webgui_rf_set_lock_tx_path('prot 1', True,
'Radio Interface 1/4/1 (pri)')
time.sleep(5)
wgdisp.webgui_rf_set_lock_tx_path('prot 1')
time.sleep(5)
wgdisp.webgui_logoff()
wgdisp.webgui_close_connection()
## ========== Step 6 ==========
# Ensure that traffic flows and no alarms or errors are recorded
logging.info(
'Ensure that traffic flows and no alarms or errors are recorded')
# check that we have a working protected rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
results.set_verify(
"PASS", util.gframe(),
'Spirent connection confirmed for Protected RF Link')
else:
# if no RF link stop script
results.set_verify(
"FAIL", util.gframe(),
'Spirent connection has not been established correctly after 3 attempts.'
)
end_script('error', results, rig, start_time, wg, ss)
quit()
# C. check to see whether any new alarms have been raised
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms != currentalarms:
print_alarms(currentalarms)
results.set_verify(
"FAIL", util.gframe(),
'Differences in alarms have been found, not as expected')
end_script('error', results, rig, start_time, wg, ss)
quit()
else:
results.set_verify("PASS", util.gframe(),
'No Alarms have been raised ... as expected')
## ========== Step 7 ==========
# drop the Primary Path and ensure secondary takes over - record the drop time
logging.info(
'drop the Primary Path and ensure secondary takes over - record the drop time'
)
# check that the Primary Path is up
wgpri = webgui(ctr1.ipaddress, 'Firefox')
wgpri.webgui_logon()
time.sleep(5)
wgpri.webgui_set_page('Radio Configuration', 'Radio Link Configuration')
time.sleep(5)
if wgpri.webgui_rf_is_link_up('RADIO INT 1/4/1'):
pripath = True
logging.info(
'RADIO INT 1/4/1 (Primary) is up and transmitting from %s' %
ctr1.name)
results.set_verify(
"LOG", util.gframe(),
'RADIO INT 1/4/1 (Primary) is up and transmitting from %s' %
ctr1.name)
else:
pripath = False
logging.info(
'RADIO INT 1/4/2 (Secondary) is up and transmitting from %s' %
ctr1.name)
results.set_verify(
"LOG", util.gframe(),
'RADIO INT 1/4/2 (Secondary) is up and transmitting from %s' %
ctr1.name)
# start a spirent outage run for outage capture
ss.simspir_start_outage_run('3/9', '3/10')
logging.info('Starting Spirent Traffic for outage capture')
time.sleep(10)
# kill the Up and transmitting RFU.
if pripath:
ctr1.sendcli('c t; int ra 4/1; diag rfu ind')
else:
ctr1.sendcli('c t; int ra 4/2; diag rfu ind')
time.sleep(20)
# ensure standby RF Path takes over
if wgpri.webgui_rf_is_link_up('RADIO INT 1/4/1'):
stdbypath = False
logging.info(
'RADIO INT 1/4/1 (Primary) is up and transmitting from %s' %
ctr1.name)
results.set_verify(
"LOG", util.gframe(),
'RADIO INT 1/4/1 (Primary) is up and transmitting from %s' %
ctr1.name)
else:
stdbypath = True
logging.info(
'RADIO INT 1/4/2 (Secondary) is up and transmitting from %s' %
ctr1.name)
results.set_verify(
"LOG", util.gframe(),
'RADIO INT 1/4/2 (Secondary) is up and transmitting from %s' %
ctr1.name)
if pripath == stdbypath:
results.set_verify(
"PASS", util.gframe(),
"Protection has correctly switched to the alternate RF path")
else:
results.set_verify(
"FAIL", util.gframe(),
"Protection has NOT correctly switched to the alternate RF path")
# D. Ensure correct alarms are raised
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms == currentalarms:
results.set_verify(
"FAIL", util.gframe(),
'No Extra Alarms have been raised ... not as expected')
print_alarms(currentalarms)
else:
results.set_verify(
"PASS", util.gframe(),
'Differences in alarms have been found, as expected')
print_alarms(currentalarms)
# E. Record Traffic Outage
rfout = ss.simspir_get_value_outage_run()[0]
results.set_verify(
"LOG", util.gframe(),
'RF Outage during Protection Switch was %s milliseconds' % str(rfout))
if int(rfout) <= 50:
results.set_verify(
"PASS", util.gframe(),
'RF Outage due to the Protection Switch was less than 50 milliseconds'
)
else:
results.set_verify(
"FAIL", util.gframe(),
'RF Outage due to the Protection Switch was greater than 50 milliseconds'
)
## ========== Step 8 ==========
# restore the Primary Path and ensure link is restored as expected
logging.info(
'restore the Primary Path and ensure link is restored as expected')
# A. start a Traffic Outage Spirent flow
ss.simspr_clear_counters()
# B. restore the Primary RFU.
# kill the Up and transmitting RFU.
if pripath:
ctr1.sendcli('c t; int ra 4/1; no diag rfu')
else:
ctr1.sendcli('c t; int ra 4/2; no diag rfu')
# C. ensure RF Link remains
if wgpri.webgui_rf_is_link_up('RADIO INT 1/4/1'):
currpath = True
logging.info(
'RADIO INT 1/4/1 (Primary) is up and transmitting from %s' %
ctr1.name)
results.set_verify(
"LOG", util.gframe(),
'RADIO INT 1/4/1 (Primary) is up and transmitting from %s' %
ctr1.name)
else:
currpath = False
logging.info(
'RADIO INT 1/4/2 (Secondary) is up and transmitting from %s' %
ctr1.name)
results.set_verify(
"LOG", util.gframe(),
'RADIO INT 1/4/2 (Secondary) is up and transmitting from %s' %
ctr1.name)
if pripath == currpath:
results.set_verify(
"FAIL", util.gframe(),
"Protection has switched to the Original RF path when not needed")
else:
results.set_verify(
"PASS", util.gframe(),
"Protection has NOT switched to the Original RF path as expected")
# D. Ensure correct alarms are raised / dropped
currentalarms = check_alarms(ctr1.ipaddress)
if startalarms == currentalarms:
results.set_verify(
"PASS", util.gframe(),
'Differences in alarms have been found, not as expected')
else:
results.set_verify("PASS", util.gframe(),
'No Alarms have been raised ... as expected')
print_alarms(currentalarms)
# E. Record Traffic Outage if any
rfout = ss.simspir_get_value_outage_run()[0]
results.set_verify(
"LOG", util.gframe(),
'RF Outage during condition was %s milliseconds' % str(rfout))
if int(rfout) <= 50:
results.set_verify(
"PASS", util.gframe(),
'RF Outage due to the Protection Switch was less than 50 milliseconds'
)
else:
results.set_verify(
"FAIL", util.gframe(),
'RF Outage due to the Protection Switch was greater than 50 milliseconds'
)
wgpri.webgui_logoff()
wgpri.webgui_close_connection()
# stop current spirent run
ss.simspir_stop_outage_run()
ss.simspr_release()
## ========== Step 8 ==========
# check that the Rx Diversity source lock diagnostics is working as expected
logging.info(
'check that the Rx Diversity source lock diagnostics is working as expected'
)
wgrxlock = webgui(ctr1.ipaddress, 'Firefox')
wgrxlock.webgui_logon()
time.sleep(5)
wgrxlock.webgui_set_page('Radio Configuration', 'Radio Link Diagnostics')
time.sleep(5)
wgrxlock.webgui_set_nav_tab('RADIO LINK PROTECTION DIAGNOSTICS')
time.sleep(5)
# lock Primary RFU RX and check for alarm and traffic flow
wgrxlock.webgui_rf_set_lock_rx_path('prot 1', True,
'Radio Interface 1/4/1 (pri)')
time.sleep(10)
rxlockalarms = check_alarms(ctr1.ipaddress)
alarmfound = False
print_alarms(rxlockalarms)
for al in rxlockalarms:
for x in al:
if 'Rx-source lock diagnostic' in x:
results.set_verify(
"PASS", util.gframe(),
'The expected Rx-source lock diagnostic alarm was raised for Primary RFU'
)
alarmfound = True
if not alarmfound:
results.set_verify(
"FAIL", util.gframe(),
'The expected Rx-source lock diagnostic alarm was NOT raised for Primary RFU'
)
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info(
'Spirent connection confirmed for Primary Rx Lock ... continuing with test script'
)
results.set_verify(
"PASS", util.gframe(),
'Spirent connection confirmed for Primary Rx Lock ... continuing with test script'
)
else:
# if no RF link stop script
logging.error(
'Spirent connection has not been established correctly after 3 attempts.'
)
results.set_verify(
"FAIL", util.gframe(),
'Spirent connection has not been established correctly after 3 attempts.'
)
wgrxlock.webgui_rf_set_lock_rx_path('prot 1', True,
'Radio Interface 1/4/2 (sec)')
time.sleep(10)
rxlockalarms = check_alarms(ctr1.ipaddress)
alarmfound = False
print_alarms(rxlockalarms)
for al in rxlockalarms:
for x in al:
if 'Rx-source lock diagnostic' in x:
results.set_verify(
"PASS", util.gframe(),
'The expected Rx-source lock diagnostic alarm was raised for Secondary RFU'
)
alarmfound = True
if not alarmfound:
results.set_verify(
"FAIL", util.gframe(),
'The expected Rx-source lock diagnostic alarm was NOT raised for Secondary RFU'
)
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info(
'Spirent connection confirmed for Secondary Rx Lock ... continuing with test script'
)
results.set_verify(
"PASS", util.gframe(),
'Spirent connection confirmed for Secondary Rx Lock ... continuing with test script'
)
else:
# if no RF link stop script
logging.error(
'Spirent connection has not been established correctly after 3 attempts.'
)
results.set_verify(
"FAIL", util.gframe(),
'Spirent connection has not been established correctly after 3 attempts.'
)
wgrxlock.webgui_rf_set_lock_rx_path('prot 1')
wgrxlock.webgui_logoff()
wgrxlock.webgui_close_connection()
## ========== Step 9 ==========
# remove the protected configuration from the CTRs and MATRIX
logging.info('Remove the protected configuration from the CTRs')
# A. set MATRIX Box to nonprotected setup
matrix.set_nonprotected()
# B. delete the Protection configuration from the Nodes
for ctr in [ctr1, ctr2]:
logging.info('Removing Protection from %s' % ctr.name)
wgunprot = webgui(ctr.ipaddress, 'Firefox')
wgunprot.webgui_logon()
time.sleep(5)
wgunprot.webgui_set_page('Radio Configuration',
'Radio Link Configuration')
time.sleep(2)
wgunprot.webgui_set_nav_tab("RADIO LINK PROTECTION")
time.sleep(5)
wgunprot.webgui_rf_remove_protection(1)
time.sleep(2)
wgunprot.webgui_apply()
time.sleep(2)
wgunprot.webgui_logoff()
wgunprot.webgui_close_connection()
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
# run the end script
end_script('Normal', results, rig, start_time, wg, ss)
quit()
def test_template():
# ========== Testrig and Testscript Initialization ==========
# Initiate Testrig object - this handles all testrig objects as well as Topology and Config setup
rig = TestRig("DVTA-CT-3", "T008.ini", "C001.ini", developmentrig, False) # testcase ID, topology filename, config filename, developmentrig and Initialization Requirement
# simple path to each of the Nodes (remove the ones that aren't needed)
# ctr1 = rig.nodes['node1']
ctr2 = rig.nodes['node2']
# ctr3 = rig.nodes['node3']
# ctr4 = rig.nodes['node4']
# simple path to each of the Test Equipment ((remove the ones that aren't needed)
# mrv = rig.devices['MRV']
# matrix = rig.devices['MATRIX']
ss = rig.devices['SPIRENT']
# logging - start of test script and other basic info
start_sw_version = ctr2.get_sw_version()
start_time = time.time()
logging.info('START %s, version %s' % (test_template.__name__, VERSION))
logging.info('Current Software Build installed = %s' % (start_sw_version))
# Results - xml or excel writer (REMOVE ONE)
results = xmlwriter("DVTA-CT-1", "T007", "Basic Software Loading and Configuration functions of CraftTool") # testcase ID, Topology Used, Test Case Description
# results = ExcelWriter()
# Initialize the required libraries
util = utils()
bsys = basicsys(rig)
## ========== Pre-Flow setup and checks ==========
# Carry out all of the basic setup here which are not testable items
logging.info("Starting the Pre-Test Setup")
# log the software pack to be used
test_sw_dir = "C:/swpacks/" # the desired test sw dir
test_sw_vers = os.listdir(test_sw_dir)[0] # the desired swpack
logging.info('Current Cycle Software to be tested = %s' % (test_sw_vers))
# Initialize Webgui
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
# establish a starting list of alarms and check to ensure there are no Critical alarms
startalarms = check_alarms(wg)
print_alarms(startalarms)
# check that we have a working rf link by passing 10sec of traffic and ensure no dropped frames check up to 3 times
if ss.simspr_line_check('3/9', '3/10'): # use correct ports for this
logging.info('Spirent connection confirmed ... continuing with test script')
else:
# if no RF link stop script
logging.error('Spirent connection has not been established correctly after 3 attempts.')
end_script('error', results, rig, start_time, wg, ss)
# Start a spirent outage run for outage capture
ss.simspir_start_outage_run('3/9', '3/10')
logging.info('Starting Spirent Traffic for outage capture')
# Check that the current software version is loaded, if not, load it.
curr_sw_version = util.format_SWpack_str(start_sw_version)
if not os.path.exists(os.path.join(test_sw_dir, curr_sw_version)):
logging.info("Currently loaded Software Pack is %s. Loading the latest test build - %s." % (curr_sw_version, test_sw_vers))
swpack = load_SWpack(os.path.join(test_sw_vers), wg)
if swpack[0] and swpack[2]:
# Successful downgrade - send results and clear spirent counters
results.set_verify("LOG", util.gframe(), "%s has been upgraded to the latest test build %s" % (ctr2.name, test_sw_vers))
results.set_verify("LOG", util.gframe(), 'RF Outage during downgrade was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
else:
# Unsuccessful downgrade - send results and end script safely
results.set_verify("ERROR", util.gframe(), "%s has NOT been upgraded to the latest test build %s for unknown reasons" % (ctr2.name, test_sw_vers))
end_script('error', results, rig, start_time, wg, ss)
## ========== Test step flow ==========
## ========== Step 1 ==========
# ensure all ethernet ports are licensed as a base check
logging.info("STEP 1: ensure all ethernet ports are licensed as a base check")
if count_licensed_ports(wg) == 12:
results.set_verify("LOG", util.gframe(), "Super License is currently loaded and all ports are Available as expected")
else:
results.set_verify("LOG", util.gframe(), "The Super License is not currently loaded ... script should still run OK")
## ========== Step 2 ==========
# remove all licenses from the node via cli except for -basic
logging.info("STEP 2: remove all licenses from the node via cli except for -basic")
# close the webgui to avoid issues when reload happens
wg.webgui_logoff()
wg.webgui_close_connection()
if bsys.basicsys_remove_licenses(ctr2):
# Successful test condition - send results and clear spirent counters
results.set_verify("PASS", util.gframe(), "Removal of all licenses except the basic license was successful")
results.set_verify("LOG", util.gframe(), 'RF Outage during license removal (and reload) was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Removal of all licenses except the basic license was unsuccessful")
end_script('error', results, rig, start_time, wg, ss)
# clear spirent counters and check alarms on webgui (assumes webgui is open)
ss.simspr_clear_counters()
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 3 ==========
# check for correct display on license page and ensure only 4 eth ports are available
logging.info("STEP 3: check for correct display on license page and ensure only 4 eth ports are available")
features = count_licensed_features(wg, 'lic')
if features[0] == 6:
results.set_verify("PASS", util.gframe(), "The Licensed Feature count of 6 is as expected")
else:
results.set_verify("FAIL", util.gframe(), "The Licensed Feature count does not appear to be correct")
# Log the Licensed and unlicensed features
results.set_verify("LOG", util.gframe(), "Licensed Features are: %s" % features[1])
unfeatures = count_licensed_features(wg, 'unlic')
results.set_verify("LOG", util.gframe(), "Unlicensed Features are: %s" % unfeatures[1])
ports = count_licensed_ports(wg)
if ports[0] == 4:
results.set_verify("PASS", util.gframe(), "Only the 4 Ethernet Ports are available as expected")
else:
results.set_verify("FAIL", util.gframe(), "There should be 4 Ethernet Ports available, however %s are shown as licensed" % str(ports[0]))
# Log the Licensed ports
results.set_verify("LOG", util.gframe(), "Licensed Ports are: %s" % ports[1])
## ========== Step 4 ==========
# add the -sfp license
logging.info("STEP 4: add the -sfp license")
# close the webgui to avoid connection issues
wg.webgui_logoff()
wg.webgui_close_connection()
if bsys.basicsys_add_license_path(ctr2, 'http://192.168.77.1/CTR8540/licenses/212/LKA14020131-sfp.LIC'):
results.set_verify("PASS", util.gframe(), "Adding of the sfp license has been successful")
results.set_verify("LOG", util.gframe(), 'RF Outage during license addition was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Adding of the sfp license has been unsuccessful")
end_script('error', results, rig, start_time, wg, ss)
# clear spirent counters and check alarms on webgui
ss.simspr_clear_counters()
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 5 ==========
# check for correct display on license page and ensure the sfp ports are now available
logging.info("STEP 5: check for correct display on license page and ensure the sfp ports are now available")
features = count_licensed_features(wg, 'lic')
if features[0] == 7:
results.set_verify("PASS", util.gframe(), "The Licensed Feature count of 7 is as expected")
else:
results.set_verify("FAIL", util.gframe(), "The Licensed Feature count does not appear to be correct")
# Log the Licensed and unlicensed features
results.set_verify("LOG", util.gframe(), "Licensed Features are: %s" % features[1])
unfeatures = count_licensed_features(wg, 'unlic')
results.set_verify("LOG", util.gframe(), "Unlicensed Features are: %s" % unfeatures[1])
ports = count_licensed_ports(wg)
if ports[0] == 8:
results.set_verify("PASS", util.gframe(), "8 Ports (4 electrical and 4 sfp) are available as expected")
else:
results.set_verify("FAIL", util.gframe(), "There should be 8 Ports available, however %s are shown as licensed" % str(ports[0]))
# Log the Licensed ports
results.set_verify("LOG", util.gframe(), "Licensed Ports are: %s" % ports[1])
## ========== Step 6 ==========
# add the -super license
logging.info("STEP 6: add the -super license")
# close the webgui to avoid connection issues
wg.webgui_logoff()
wg.webgui_close_connection()
if bsys.basicsys_add_license_path(ctr2, 'http://192.168.77.1/CTR8540/licenses/212/LKA14020131-super.LIC'):
results.set_verify("PASS", util.gframe(), "Adding of the super license has been successful")
results.set_verify("LOG", util.gframe(), 'RF Outage during license addition was %s milliseconds' % str(ss.simspir_get_value_outage_run()[0]))
else:
# Unsuccessful test condition - send results and end script safely
results.set_verify("FAIL", util.gframe(), "Adding of the super license has been unsuccessful")
end_script('error', results, rig, start_time, wg, ss)
# clear spirent counters and check alarms on webgui (assumes webgui is open)
ss.simspr_clear_counters()
wg = webgui(ctr2.ipaddress, 'Firefox')
wg.webgui_logon()
currentalarms = check_alarms(wg)
if startalarms != currentalarms:
print_alarms(currentalarms)
## ========== Step 7 ==========
# check for correct display on license page and ensure all ports are now available
logging.info("STEP 7: check for correct display on license page and ensure all ports are now available")
features = count_licensed_features(wg, 'lic')
if features[0] == 15:
results.set_verify("PASS", util.gframe(), "The Licensed Feature, for the super license, count of 7 is as expected")
else:
results.set_verify("FAIL", util.gframe(), "The Licensed Feature, for the super license, count does not appear to be correct")
# Log the Licensed and unlicensed features
results.set_verify("LOG", util.gframe(), "Licensed Features are: %s" % features[1])
unfeatures = count_licensed_features(wg, 'unlic')
results.set_verify("LOG", util.gframe(), "Unlicensed Features are: %s" % unfeatures[1])
ports = count_licensed_ports(wg)
if ports[0] == 12:
results.set_verify("PASS", util.gframe(), "All Ports (8 electrical and 4 sfp) are available as expected")
else:
results.set_verify("FAIL", util.gframe(), "There should be all 12 Ports available, however %s are shown as licensed" % str(ports[0]))
# Log the Licensed ports
results.set_verify("LOG", util.gframe(), "Licensed Ports are: %s" % ports[1])
## ========== Test Step rollback ==========
# all commands to rollback the configuration that has taken place throughout this script
# No rollback required
logging.info("TEST SETUP ROLLBACK: No rollback required")
# run the end script
end_script('Normal', results, rig, start_time, wg, ss)
quit()