def test_VT_UNKNOWN_1(self):
        a = _midlSAFEARRAY(POINTER(IUnknown))
        t = _midlSAFEARRAY(POINTER(IUnknown))
        self.failUnless(a is t)

        def com_refcnt(o):
            "Return the COM refcount of an interface pointer"
            import gc
            gc.collect()
            gc.collect()
            o.AddRef()
            return o.Release()

        from comtypes.typeinfo import CreateTypeLib, ICreateTypeLib
        punk = CreateTypeLib("spam").QueryInterface(
            IUnknown)  # will never be saved to disk

        # initial refcount
        initial = com_refcnt(punk)

        # This should increase the refcount by 1
        sa = t.from_param([punk])
        self.failUnlessEqual(initial + 1, com_refcnt(punk))

        # Unpacking the array must not change the refcount, and must
        # return an equal object.
        self.failUnlessEqual((punk, ), sa[0])
        self.failUnlessEqual(initial + 1, com_refcnt(punk))

        del sa
        self.failUnlessEqual(initial, com_refcnt(punk))

        sa = t.from_param([None])
        self.failUnlessEqual((POINTER(IUnknown)(), ), sa[0])
Exemple #2
0
    def test_UDT_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        from comtypes.gen.TestComServerLib import MYCOLOR

        t = _midlSAFEARRAY(MYCOLOR)
        self.failUnless(t is _midlSAFEARRAY(MYCOLOR))

        sa = t.from_param([MYCOLOR(0, 0, 0), MYCOLOR(1, 2, 3)])
        arr = get_array(sa)

        self.failUnless(isinstance(arr, np.ndarray))
        # The conversion code allows numpy to choose the dtype of
        # structured data.  This dtype is structured under numpy 1.5, 1.7 and
        # 1.8, and object in 1.6. Instead of assuming either of these, check
        # the array contents based on the chosen type.
        if arr.dtype is np.dtype(object):
            data = [(x.red, x.green, x.blue) for x in arr]
        else:
            float_dtype = np.dtype('float64')
            self.assertIs(arr.dtype[0], float_dtype)
            self.assertIs(arr.dtype[1], float_dtype)
            self.assertIs(arr.dtype[2], float_dtype)
            data = [tuple(x) for x in arr]
        self.failUnlessEqual(data, [(0.0, 0.0, 0.0), (1.0, 2.0, 3.0)])
    def test_UDT_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        from comtypes.gen.TestComServerLib import MYCOLOR

        t = _midlSAFEARRAY(MYCOLOR)
        self.failUnless(t is _midlSAFEARRAY(MYCOLOR))

        sa = t.from_param([MYCOLOR(0, 0, 0), MYCOLOR(1, 2, 3)])
        arr = get_array(sa)

        self.failUnless(isinstance(arr, np.ndarray))
        # The conversion code allows numpy to choose the dtype of
        # structured data.  This dtype is structured under numpy 1.5, 1.7 and
        # 1.8, and object in 1.6. Instead of assuming either of these, check
        # the array contents based on the chosen type.
        if arr.dtype is np.dtype(object):
            data = [(x.red, x.green, x.blue) for x in arr]
        else:
            float_dtype = np.dtype('float64')
            self.assertIs(arr.dtype[0], float_dtype)
            self.assertIs(arr.dtype[1], float_dtype)
            self.assertIs(arr.dtype[2], float_dtype)
            data = [tuple(x) for x in arr]
        self.failUnlessEqual(data, [(0.0, 0.0, 0.0), (1.0, 2.0, 3.0)])
Exemple #4
0
    def test_VT_UNKNOWN_1(self):
        a = _midlSAFEARRAY(POINTER(IUnknown))
        t = _midlSAFEARRAY(POINTER(IUnknown))
        self.assertTrue(a is t)

        from comtypes.typeinfo import CreateTypeLib
        # will never be saved to disk
        punk = CreateTypeLib("spam").QueryInterface(IUnknown)

        # initial refcount
        initial = com_refcnt(punk)

        # This should increase the refcount by 1
        sa = t.from_param([punk])
        self.assertEqual(initial + 1, com_refcnt(punk))

        # Unpacking the array must not change the refcount, and must
        # return an equal object.
        self.assertEqual((punk, ), sa[0])
        self.assertEqual(initial + 1, com_refcnt(punk))

        del sa
        self.assertEqual(initial, com_refcnt(punk))

        sa = t.from_param([None])
        self.assertEqual((POINTER(IUnknown)(), ), sa[0])
    def test_VT_UNKNOWN_1(self):
        a = _midlSAFEARRAY(POINTER(IUnknown))
        t = _midlSAFEARRAY(POINTER(IUnknown))
        self.failUnless(a is t)

        def com_refcnt(o):
            "Return the COM refcount of an interface pointer"
            import gc; gc.collect(); gc.collect()
            o.AddRef()
            return o.Release()

        from comtypes.typeinfo import CreateTypeLib, ICreateTypeLib
        punk = CreateTypeLib("spam").QueryInterface(IUnknown) # will never be saved to disk

        # initial refcount
        initial = com_refcnt(punk)

        # This should increase the refcount by 1
        sa = t.from_param([punk])
        self.failUnlessEqual(initial + 1, com_refcnt(punk))

        # Unpacking the array must not change the refcount, and must
        # return an equal object.
        self.failUnlessEqual((punk,), sa[0])
        self.failUnlessEqual(initial + 1, com_refcnt(punk))

        del sa
        self.failUnlessEqual(initial, com_refcnt(punk))

        sa = t.from_param([None])
        self.failUnlessEqual((POINTER(IUnknown)(),), sa[0])
Exemple #6
0
    def test_VT_UNKNOWN_multi_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        a = _midlSAFEARRAY(POINTER(IUnknown))
        t = _midlSAFEARRAY(POINTER(IUnknown))
        self.failUnless(a is t)

        def com_refcnt(o):
            "Return the COM refcount of an interface pointer"
            import gc
            gc.collect()
            gc.collect()
            o.AddRef()
            return o.Release()

        from comtypes.typeinfo import CreateTypeLib, ICreateTypeLib
        punk = CreateTypeLib("spam").QueryInterface(
            IUnknown)  # will never be saved to disk

        # initial refcount
        initial = com_refcnt(punk)

        # This should increase the refcount by 4
        sa = t.from_param((punk, ) * 4)
        self.failUnlessEqual(initial + 4, com_refcnt(punk))

        # Unpacking the array must not change the refcount, and must
        # return an equal object. Creating an ndarray may change the
        # refcount.
        arr = get_array(sa)
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(object), arr.dtype)
        self.failUnless((arr == (punk, ) * 4).all())
        self.failUnlessEqual(initial + 8, com_refcnt(punk))

        del arr
        self.failUnlessEqual(initial + 4, com_refcnt(punk))

        del sa
        self.failUnlessEqual(initial, com_refcnt(punk))

        # This should increase the refcount by 2
        sa = t.from_param((punk, None, punk, None))
        self.failUnlessEqual(initial + 2, com_refcnt(punk))

        null = POINTER(IUnknown)()
        arr = get_array(sa)
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(object), arr.dtype)
        self.failUnless((arr == (punk, null, punk, null)).all())

        del sa
        del arr
        self.failUnlessEqual(initial, com_refcnt(punk))
    def test_VT_UNKNOWN_multi(self):
        a = _midlSAFEARRAY(POINTER(IUnknown))
        t = _midlSAFEARRAY(POINTER(IUnknown))
        self.failUnless(a is t)

        def com_refcnt(o):
            "Return the COM refcount of an interface pointer"
            import gc
            gc.collect()
            gc.collect()
            o.AddRef()
            return o.Release()

        from comtypes.typeinfo import CreateTypeLib, ICreateTypeLib
        punk = CreateTypeLib("spam").QueryInterface(
            IUnknown)  # will never be saved to disk

        # initial refcount
        initial = com_refcnt(punk)

        # This should increase the refcount by 4
        sa = t.from_param((punk, ) * 4)
        self.failUnlessEqual(initial + 4, com_refcnt(punk))

        # Unpacking the array must not change the refcount, and must
        # return an equal object.
        self.failUnlessEqual((punk, ) * 4, sa[0])
        self.failUnlessEqual(initial + 4, com_refcnt(punk))

        del sa
        self.failUnlessEqual(initial, com_refcnt(punk))

        # This should increase the refcount by 2
        sa = t.from_param((punk, None, punk, None))
        self.failUnlessEqual(initial + 2, com_refcnt(punk))

        null = POINTER(IUnknown)()
        self.failUnlessEqual((punk, null, punk, null), sa[0])

        del sa
        self.failUnlessEqual(initial, com_refcnt(punk))

        # repeat same test, with 2 different com pointers

        plib = CreateTypeLib("foo")
        a, b = com_refcnt(plib), com_refcnt(punk)
        sa = t.from_param([plib, punk, plib])

        ####        self.failUnlessEqual((plib, punk, plib), sa[0])
        self.failUnlessEqual((a + 2, b + 1),
                             (com_refcnt(plib), com_refcnt(punk)))

        del sa
        self.failUnlessEqual((a, b), (com_refcnt(plib), com_refcnt(punk)))
Exemple #8
0
    def test_VT_UNKNOWN_multi_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        a = _midlSAFEARRAY(POINTER(IUnknown))
        t = _midlSAFEARRAY(POINTER(IUnknown))
        self.failUnless(a is t)

        def com_refcnt(o):
            "Return the COM refcount of an interface pointer"
            import gc; gc.collect(); gc.collect()
            o.AddRef()
            return o.Release()

        from comtypes.typeinfo import CreateTypeLib, ICreateTypeLib
        punk = CreateTypeLib("spam").QueryInterface(IUnknown) # will never be saved to disk

        # initial refcount
        initial = com_refcnt(punk)

        # This should increase the refcount by 4
        sa = t.from_param((punk,) * 4)
        self.failUnlessEqual(initial + 4, com_refcnt(punk))

        # Unpacking the array must not change the refcount, and must
        # return an equal object. Creating an ndarray may change the
        # refcount.
        arr = get_array(sa)
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(object), arr.dtype)
        self.failUnless((arr == (punk,)*4).all())
        self.failUnlessEqual(initial + 8, com_refcnt(punk))

        del arr
        self.failUnlessEqual(initial + 4, com_refcnt(punk))

        del sa
        self.failUnlessEqual(initial, com_refcnt(punk))

        # This should increase the refcount by 2
        sa = t.from_param((punk, None, punk, None))
        self.failUnlessEqual(initial + 2, com_refcnt(punk))

        null = POINTER(IUnknown)()
        arr = get_array(sa)
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(object), arr.dtype)
        self.failUnless((arr == (punk, null, punk, null)).all())

        del sa
        del arr
        self.failUnlessEqual(initial, com_refcnt(punk))
    def test_equality(self):
        a = _midlSAFEARRAY(c_long)
        b = _midlSAFEARRAY(c_long)
        self.failUnless(a is b)

        c = _midlSAFEARRAY(BSTR)
        d = _midlSAFEARRAY(BSTR)
        self.failUnless(c is d)

        self.failIfEqual(a, c)

        # XXX remove:
        self.failUnlessEqual((a._itemtype_, a._vartype_), (c_long, VT_I4))
        self.failUnlessEqual((c._itemtype_, c._vartype_), (BSTR, VT_BSTR))
Exemple #10
0
    def test_equality(self):
        a = _midlSAFEARRAY(c_long)
        b = _midlSAFEARRAY(c_long)
        self.assertTrue(a is b)

        c = _midlSAFEARRAY(BSTR)
        d = _midlSAFEARRAY(BSTR)
        self.assertTrue(c is d)

        self.assertNotEqual(a, c)

        # XXX remove:
        self.assertEqual((a._itemtype_, a._vartype_), (c_long, VT_I4))
        self.assertEqual((c._itemtype_, c._vartype_), (BSTR, VT_BSTR))
    def test_VT_UNKNOWN_multi(self):
        a = _midlSAFEARRAY(POINTER(IUnknown))
        t = _midlSAFEARRAY(POINTER(IUnknown))
        self.failUnless(a is t)

        def com_refcnt(o):
            "Return the COM refcount of an interface pointer"
            import gc; gc.collect(); gc.collect()
            o.AddRef()
            return o.Release()

        from comtypes.typeinfo import CreateTypeLib, ICreateTypeLib
        punk = CreateTypeLib("spam").QueryInterface(IUnknown) # will never be saved to disk

        # initial refcount
        initial = com_refcnt(punk)

        # This should increase the refcount by 4
        sa = t.from_param((punk,) * 4)
        self.failUnlessEqual(initial + 4, com_refcnt(punk))

        # Unpacking the array must not change the refcount, and must
        # return an equal object.
        self.failUnlessEqual((punk,)*4, sa[0])
        self.failUnlessEqual(initial + 4, com_refcnt(punk))

        del sa
        self.failUnlessEqual(initial, com_refcnt(punk))

        # This should increase the refcount by 2
        sa = t.from_param((punk, None, punk, None))
        self.failUnlessEqual(initial + 2, com_refcnt(punk))

        null = POINTER(IUnknown)()
        self.failUnlessEqual((punk, null, punk, null), sa[0])

        del sa
        self.failUnlessEqual(initial, com_refcnt(punk))

        # repeat same test, with 2 different com pointers

        plib = CreateTypeLib("foo")
        a, b = com_refcnt(plib), com_refcnt(punk)
        sa = t.from_param([plib, punk, plib])

####        self.failUnlessEqual((plib, punk, plib), sa[0])
        self.failUnlessEqual((a+2, b+1), (com_refcnt(plib), com_refcnt(punk)))

        del sa
        self.failUnlessEqual((a, b), (com_refcnt(plib), com_refcnt(punk)))
    def test_UDT(self):
        from comtypes.gen.TestComServerLib import MYCOLOR

        t = _midlSAFEARRAY(MYCOLOR)
        self.failUnless(t is _midlSAFEARRAY(MYCOLOR))

        sa = t.from_param([MYCOLOR(0, 0, 0), MYCOLOR(1, 2, 3)])

        self.failUnlessEqual([(x.red, x.green, x.blue) for x in sa[0]],
                             [(0.0, 0.0, 0.0), (1.0, 2.0, 3.0)])

        def doit():
            t.from_param([MYCOLOR(0, 0, 0), MYCOLOR(1, 2, 3)])
        bytes = find_memleak(doit)
        self.failIf(bytes, "Leaks %d bytes" % bytes)
    def test_UDT(self):
        from comtypes.gen.TestComServerLib import MYCOLOR

        t = _midlSAFEARRAY(MYCOLOR)
        self.failUnless(t is _midlSAFEARRAY(MYCOLOR))

        sa = t.from_param([MYCOLOR(0, 0, 0), MYCOLOR(1, 2, 3)])

        self.failUnlessEqual([(x.red, x.green, x.blue) for x in sa[0]],
                             [(0.0, 0.0, 0.0), (1.0, 2.0, 3.0)])

        def doit():
            t.from_param([MYCOLOR(0, 0, 0), MYCOLOR(1, 2, 3)])
        bytes = find_memleak(doit)
        self.failIf(bytes, "Leaks %d bytes" % bytes)
    def test_array(self):
        t = _midlSAFEARRAY(c_double)
        pat = pointer(t())

        try:
            import numpy
        except ImportError:
            pass # numpy not available
        else:
            pat[0] = numpy.zeros(32, dtype=numpy.float)
            self.failUnlessEqual(tuple(pat[0][0]),
                                 (0.0,) * 32)

            data = ((1.0, 2.0, 3.0),
                    (4.0, 5.0, 6.0),
                    (7.0, 8.0, 9.0))
            a = numpy.array(data,
                            dtype=numpy.double)
            pat[0] = a
            self.failUnlessEqual(pat[0][0],
                                 data)

            data = ((1.0, 2.0), (3.0, 4.0), (5.0, 6.0))
            a = numpy.array(data,
                            dtype=numpy.double,
                            order="F")
            pat[0] = a
            self.failUnlessEqual(pat[0][0],
                                 data)
Exemple #15
0
    def test_array(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(c_double)
        pat = pointer(t())

        pat[0] = np.zeros(32, dtype=np.float)
        arr = get_array(pat[0])
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(np.double), arr.dtype)
        self.failUnless((arr == (0.0, ) * 32).all())

        data = ((1.0, 2.0, 3.0), (4.0, 5.0, 6.0), (7.0, 8.0, 9.0))
        a = np.array(data, dtype=np.double)
        pat[0] = a
        arr = get_array(pat[0])
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(np.double), arr.dtype)
        self.failUnless((arr == data).all())

        data = ((1.0, 2.0), (3.0, 4.0), (5.0, 6.0))
        a = np.array(data, dtype=np.double, order="F")
        pat[0] = a
        arr = get_array(pat[0])
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(np.double), arr.dtype)
        self.failUnlessEqual(pat[0][0], data)
    def test_equality(self):
        a = _midlSAFEARRAY(c_long)
        b = _midlSAFEARRAY(c_long)
        self.failUnless(a is b)

        c = _midlSAFEARRAY(BSTR)
        d = _midlSAFEARRAY(BSTR)
        self.failUnless(c is d)

        self.failIfEqual(a, c)

        # XXX remove:
        self.failUnlessEqual((a._itemtype_, a._vartype_),
                             (c_long, VT_I4))
        self.failUnlessEqual((c._itemtype_, c._vartype_),
                             (BSTR, VT_BSTR))
    def test_VT_BSTR_leaks(self):
        sb = _midlSAFEARRAY(BSTR)
        def doit():
            sb.from_param(["foo", "bar"])

        bytes = find_memleak(doit)
        self.failIf(bytes, "Leaks %d bytes" % bytes)
    def test_VT_I4_leaks(self):
        sa = _midlSAFEARRAY(c_long)
        def doit():
            sa.from_param([1, 2, 3, 4, 5, 6])

        bytes = find_memleak(doit)
        self.failIf(bytes, "Leaks %d bytes" % bytes)
    def test_VT_BSTR_leaks(self):
        sb = _midlSAFEARRAY(BSTR)
        def doit():
            sb.from_param(["foo", "bar"])

        bytes = find_memleak(doit)
        self.failIf(bytes, "Leaks %d bytes" % bytes)
Exemple #20
0
    def get_commit_message(self, parameters, logmessage):
        commonurl = ""
        commonroot = ""
        bugid = ""
        bstrarray = _midlSAFEARRAY(comtypes.BSTR)
        pathlist = bstrarray.from_param(())

        bugtr = self._get_bugtraq_object()
        if bugtr is None:
            return ""
        try:
            if self.supports_bugtraq2_interface():
                (bugid, revPropNames, revPropValues,
                 newmessage) = bugtr.GetCommitMessage2(0, parameters,
                                                       commonurl, commonroot,
                                                       pathlist, logmessage,
                                                       bugid)
            else:
                newmessage = bugtr.GetCommitMessage(0, parameters, commonroot,
                                                    pathlist, logmessage)
        except COMError:
            qtlib.ErrorMsgBox(
                _('Issue Tracker Plugin Error'),
                _('Error getting commit message information from Issue Tracker plugin'
                  ))
            return ""

        return newmessage
    def test_array(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(c_double)
        pat = pointer(t())

        pat[0] = np.zeros(32, dtype=np.float)
        arr = get_array(pat[0])
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(np.double), arr.dtype)
        self.failUnless((arr == (0.0,) * 32).all())

        data = ((1.0, 2.0, 3.0),
                (4.0, 5.0, 6.0),
                (7.0, 8.0, 9.0))
        a = np.array(data, dtype=np.double)
        pat[0] = a
        arr = get_array(pat[0])
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(np.double), arr.dtype)
        self.failUnless((arr == data).all())

        data = ((1.0, 2.0), (3.0, 4.0), (5.0, 6.0))
        a = np.array(data,
                        dtype=np.double,
                        order="F")
        pat[0] = a
        arr = get_array(pat[0])
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(np.double), arr.dtype)
        self.failUnlessEqual(pat[0][0], data)
    def test_array(self):
        t = _midlSAFEARRAY(c_double)
        pat = pointer(t())

        try:
            import numpy
        except ImportError:
            pass # numpy not available
        else:
            pat[0] = numpy.zeros(32, dtype=numpy.float)
            self.failUnlessEqual(tuple(pat[0][0]),
                                 (0.0,) * 32)

            data = ((1.0, 2.0, 3.0),
                    (4.0, 5.0, 6.0),
                    (7.0, 8.0, 9.0))
            a = numpy.array(data,
                            dtype=numpy.double)
            pat[0] = a
            self.failUnlessEqual(pat[0][0],
                                 data)

            data = ((1.0, 2.0), (3.0, 4.0), (5.0, 6.0))
            a = numpy.array(data,
                            dtype=numpy.double,
                            order="F")
            pat[0] = a
            self.failUnlessEqual(pat[0][0],
                                 data)
    def test_VT_I4_leaks(self):
        sa = _midlSAFEARRAY(c_long)
        def doit():
            sa.from_param([1, 2, 3, 4, 5, 6])

        bytes = find_memleak(doit)
        self.failIf(bytes, "Leaks %d bytes" % bytes)
    def test_VT_VARIANT(self):
        t = _midlSAFEARRAY(VARIANT)

        now = datetime.datetime.now()
        sa = t.from_param([11, "22", None, True, now, Decimal("3.14")])
        self.failUnlessEqual(sa[0], (11, "22", None, True, now, Decimal("3.14")))

        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_VARIANT)
Exemple #25
0
    def test_VT_VARIANT(self):
        t = _midlSAFEARRAY(VARIANT)

        now = datetime.datetime.now()
        sa = t.from_param([11, "22", None, True, now, Decimal("3.14")])
        self.assertEqual(sa[0], (11, "22", None, True, now, Decimal("3.14")))

        self.assertEqual(SafeArrayGetVartype(sa), VT_VARIANT)
Exemple #26
0
    def test_UDT_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        from comtypes.gen.TestComServerLib import MYCOLOR

        t = _midlSAFEARRAY(MYCOLOR)
        self.failUnless(t is _midlSAFEARRAY(MYCOLOR))

        sa = t.from_param([MYCOLOR(0, 0, 0), MYCOLOR(1, 2, 3)])
        arr = get_array(sa)

        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(object), arr.dtype)
        self.failUnlessEqual([(x.red, x.green, x.blue) for x in arr],
                             [(0.0, 0.0, 0.0), (1.0, 2.0, 3.0)])
Exemple #27
0
    def test_UDT_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        from comtypes.gen.TestComServerLib import MYCOLOR

        t = _midlSAFEARRAY(MYCOLOR)
        self.failUnless(t is _midlSAFEARRAY(MYCOLOR))

        sa = t.from_param([MYCOLOR(0, 0, 0), MYCOLOR(1, 2, 3)])
        arr = get_array(sa)

        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(object), arr.dtype)
        self.failUnlessEqual([(x.red, x.green, x.blue) for x in arr],
                             [(0.0, 0.0, 0.0), (1.0, 2.0, 3.0)])
    def test_VT_I4(self):
        t = _midlSAFEARRAY(c_long)

        sa = t.from_param([11, 22, 33])

        self.failUnlessEqual(sa[0], (11, 22, 33))

        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_I4)

        # TypeError: len() of unsized object
        self.assertRaises(TypeError, lambda: t.from_param(object()))
    def test_VT_I4(self):
        t = _midlSAFEARRAY(c_long)

        sa = t.from_param([11, 22, 33])

        self.failUnlessEqual(sa[0], (11, 22, 33))

        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_I4)

        # TypeError: len() of unsized object
        self.assertRaises(TypeError, lambda: t.from_param(object()))
Exemple #30
0
    def on_commit_finished(self, logmessage):
        if not self.supports_bugtraq2_interface():
            return ""

        commonroot = ""
        bstrarray = _midlSAFEARRAY(comtypes.BSTR)
        pathlist = bstrarray.from_param(())

        bugtr = self._get_bugtraq_object()
        errormessage = bugtr.OnCommitFinished(0, commonroot, pathlist,
                logmessage, 0)
        return errormessage
    def test_VT_BOOL_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(VARIANT_BOOL)

        sa = t.from_param([True, False, True, False])
        arr = get_array(sa)
        self.failUnlessEqual(np.dtype(np.bool_), arr.dtype)
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnless((arr == (True, False, True, False)).all())
Exemple #32
0
    def test_VT_BOOL_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(VARIANT_BOOL)

        sa = t.from_param([True, False, True, False])
        arr = get_array(sa)
        self.failUnlessEqual(np.dtype(np.bool_), arr.dtype)
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnless((arr == (True, False, True, False)).all())
Exemple #33
0
class IBugTraqProvider2(IBugTraqProvider):
    _iid_ = GUID("{C5C85E31-2F9B-4916-A7BA-8E27D481EE83}")
    _methods_ = [
        COMMETHOD(
            [], HRESULT, "GetCommitMessage2",
            (['in'], comtypes.c_long, "hParentWnd"),
            (['in'], comtypes.BSTR, "parameters"),
            (['in'], comtypes.BSTR, "commonURL"),
            (['in'], comtypes.BSTR, "commonRoot"),
            (['in'], _midlSAFEARRAY(comtypes.BSTR), "pathList"),
            (['in'], comtypes.BSTR, "originalMessage"),
            (['in'], comtypes.BSTR, "bugID"),
            (['out'], POINTER(comtypes.BSTR), "bugIDOut"),
            (['out'], POINTER(_midlSAFEARRAY(comtypes.BSTR)), "revPropNames"),
            (['out'], POINTER(_midlSAFEARRAY(comtypes.BSTR)), "revPropValues"),
            (['out', 'retval'], POINTER(comtypes.BSTR), "pRetVal")),
        COMMETHOD([], HRESULT, "CheckCommit",
                  (['in'], comtypes.c_long, "hParentWnd"),
                  (['in'], comtypes.BSTR, "parameters"),
                  (['in'], comtypes.BSTR, "commonURL"),
                  (['in'], comtypes.BSTR, "commonRoot"),
                  (['in'], _midlSAFEARRAY(comtypes.BSTR), "pathList"),
                  (['in'], comtypes.BSTR, "commitMessage"),
                  (['out', 'retval'], POINTER(comtypes.BSTR), "pRetVal")),
        COMMETHOD([], HRESULT, "OnCommitFinished",
                  (['in'], comtypes.c_long, "hParentWnd"),
                  (['in'], comtypes.BSTR, "commonRoot"),
                  (['in'], _midlSAFEARRAY(comtypes.BSTR), "pathList"),
                  (['in'], comtypes.BSTR, "logMessage"),
                  (['in'], comtypes.c_long, "revision"),
                  (['out', 'retval'], POINTER(comtypes.BSTR), "pRetVal")),
        COMMETHOD([], HRESULT, "HasOptions",
                  (['out', 'retval'], POINTER(comtypes.c_int16), "pRetVal")),
        COMMETHOD([], HRESULT, "ShowOptionsDialog",
                  (['in'], comtypes.c_long, "hParentWnd"),
                  (['in'], comtypes.BSTR, "parameters"),
                  (['out', 'retval'], POINTER(comtypes.BSTR), "pRetVal"))
    ]
    def test_VT_BSTR_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(BSTR)

        sa = t.from_param(["a", "b", "c"])
        arr = get_array(sa)

        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype('<U1'), arr.dtype)
        self.failUnless((arr == ("a", "b", "c")).all())
        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_BSTR)
Exemple #35
0
    def test_VT_VARIANT_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(VARIANT)

        now = datetime.datetime.now()
        sa = t.from_param([11, "22", None, True, now, Decimal("3.14")])
        arr = get_array(sa)
        self.failUnlessEqual(np.dtype(object), arr.dtype)
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnless((arr == (11, "22", None, True, now, Decimal("3.14"))).all())
        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_VARIANT)
Exemple #36
0
    def test_VT_BSTR_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(BSTR)

        sa = t.from_param(["a", "b", "c"])
        arr = get_array(sa)

        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype('<U1'), arr.dtype)
        self.failUnless((arr == ("a", "b", "c")).all())
        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_BSTR)
Exemple #37
0
    def test_VT_I4_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(c_long)

        sa = t.from_param([11, 22, 33])

        arr = get_array(sa)

        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(np.int), arr.dtype)
        self.failUnless((arr == (11, 22, 33)).all())
        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_I4)
Exemple #38
0
    def test_VT_I4_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(c_long)

        sa = t.from_param([11, 22, 33])

        arr = get_array(sa)

        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnlessEqual(np.dtype(np.int), arr.dtype)
        self.failUnless((arr == (11, 22, 33)).all())
        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_I4)
Exemple #39
0
    def test_VT_VARIANT_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(VARIANT)

        now = datetime.datetime.now()
        sa = t.from_param([11, "22", None, True, now, Decimal("3.14")])
        arr = get_array(sa)
        self.failUnlessEqual(np.dtype(object), arr.dtype)
        self.failUnless(isinstance(arr, np.ndarray))
        self.failUnless(
            (arr == (11, "22", None, True, now, Decimal("3.14"))).all())
        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_VARIANT)
Exemple #40
0
    def test_VT_I4_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(c_long)

        inarr = np.array([11, 22, 33])
        sa = t.from_param(inarr)

        arr = get_array(sa)

        self.assertTrue(isinstance(arr, np.ndarray))
        self.assertEqual(np.dtype(np.int), arr.dtype)
        self.assertTrue((arr == inarr).all())
        self.assertEqual(SafeArrayGetVartype(sa), VT_I4)
Exemple #41
0
    def get_commit_message(self, parameters, logmessage):
        commonurl = ""
        commonroot = ""
        bugid = ""
        bstrarray = _midlSAFEARRAY(comtypes.BSTR)
        pathlist = bstrarray.from_param(())

        bugtr = self._get_bugtraq_object()
        if self.supports_bugtraq2_interface():
            (bugid, revPropNames, revPropValues, newmessage) = bugtr.GetCommitMessage2(
                    0, parameters, commonurl, commonroot, pathlist, logmessage, bugid)
        else:
            newmessage = bugtr.GetCommitMessage(
                    0, parameters, commonroot, pathlist, logmessage)

        return newmessage
Exemple #42
0
    def test_VT_VARIANT_ndarray(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(VARIANT)

        now = datetime.datetime.now()
        inarr = np.array(
            [11, "22", "33", 44.0, None, True, now,
             Decimal("3.14")]).reshape(2, 4)
        sa = t.from_param(inarr)
        arr = get_array(sa)
        self.assertEqual(np.dtype(object), arr.dtype)
        self.assertTrue(isinstance(arr, np.ndarray))
        self.assertTrue((arr == inarr).all())
        self.assertEqual(SafeArrayGetVartype(sa), VT_VARIANT)
Exemple #43
0
class IBugTraqProvider(IUnknown):
    _iid_ = GUID("{298B927C-7220-423C-B7B4-6E241F00CD93}")
    _methods_ = [
        COMMETHOD([], HRESULT, "ValidateParameters",
                  (['in'], comtypes.c_long, "hParentWnd"),
                  (['in'], comtypes.BSTR, "parameters"),
                  (['out', 'retval'], POINTER(comtypes.c_int16), "pRetVal")),
        COMMETHOD([], HRESULT, "GetLinkText",
                  (['in'], comtypes.c_long, "hParentWnd"),
                  (['in'], comtypes.BSTR, "parameters"),
                  (['out', 'retval'], POINTER(comtypes.BSTR), "pRetVal")),
        COMMETHOD([], HRESULT, "GetCommitMessage",
                  (['in'], comtypes.c_long, "hParentWnd"),
                  (['in'], comtypes.BSTR, "parameters"),
                  (['in'], comtypes.BSTR, "commonRoot"),
                  (['in'], _midlSAFEARRAY(comtypes.BSTR), "pathList"),
                  (['in'], comtypes.BSTR, "originalMessage"),
                  (['out', 'retval'], POINTER(comtypes.BSTR), "pRetVal"))
    ]
Exemple #44
0
    def on_commit_finished(self, logmessage):
        if not self.supports_bugtraq2_interface():
            return ""

        commonroot = ""
        bstrarray = _midlSAFEARRAY(comtypes.BSTR)
        pathlist = bstrarray.from_param(())

        bugtr = self._get_bugtraq_object()
        if bugtr is None:
            return ""
        try:
            errormessage = bugtr.OnCommitFinished(0, commonroot, pathlist,
                logmessage, 0)
        except COMError:
            qtlib.ErrorMsgBox(_('Issue Tracker Plugin Error'),
                _('Error executing "commit finished" trigger'))
            return ""
        return errormessage
Exemple #45
0
    def on_commit_finished(self, logmessage):
        if not self.supports_bugtraq2_interface():
            return ""

        commonroot = ""
        bstrarray = _midlSAFEARRAY(comtypes.BSTR)
        pathlist = bstrarray.from_param(())

        bugtr = self._get_bugtraq_object()
        if bugtr is None:
            return ""
        try:
            errormessage = bugtr.OnCommitFinished(0, commonroot, pathlist,
                                                  logmessage, 0)
        except COMError:
            qtlib.ErrorMsgBox(_('Issue Tracker Plugin Error'),
                              _('Error executing "commit finished" trigger'))
            return ""
        return errormessage
Exemple #46
0
    def test_datetime64_ndarray(self):
        np = get_numpy()
        if np is None:
            return
        try:
            np.datetime64
        except AttributeError:
            return

        dates = np.array([
            np.datetime64("2000-01-01T05:30:00", "s"),
            np.datetime64("1800-01-01T05:30:00", "ms"),
            np.datetime64("2014-03-07T00:12:56", "us"),
            np.datetime64("2000-01-01T12:34:56", "ns"),
        ])

        t = _midlSAFEARRAY(VARIANT)
        sa = t.from_param(dates)
        arr = get_array(sa).astype(dates.dtype)
        self.failUnless((dates == arr).all())
    def test_datetime64_ndarray(self):
        np = get_numpy()
        if np is None:
            return
        try:
            np.datetime64
        except AttributeError:
            return

        dates = np.array([
            np.datetime64("2000-01-01T05:30:00", "s"),
            np.datetime64("1800-01-01T05:30:00", "ms"),
            np.datetime64("2014-03-07T00:12:56", "us"),
            np.datetime64("2000-01-01T12:34:56", "ns"),
        ])

        t = _midlSAFEARRAY(VARIANT)
        sa = t.from_param(dates)
        arr = get_array(sa).astype(dates.dtype)
        self.failUnless((dates == arr).all())
Exemple #48
0
    def test_nested_contexts(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(BSTR)
        sa = t.from_param(["a", "b", "c"])

        first = sa[0]
        with safearray_as_ndarray:
            second = sa[0]
            with safearray_as_ndarray:
                third = sa[0]
            fourth = sa[0]
        fifth = sa[0]

        self.failUnless(isinstance(first, tuple))
        self.failUnless(isinstance(second, np.ndarray))
        self.failUnless(isinstance(third, np.ndarray))
        self.failUnless(isinstance(fourth, np.ndarray))
        self.failUnless(isinstance(fifth, tuple))
    def test_nested_contexts(self):
        np = get_numpy()
        if np is None:
            return

        t = _midlSAFEARRAY(BSTR)
        sa = t.from_param(["a", "b", "c"])

        first = sa[0]
        with safearray_as_ndarray:
            second = sa[0]
            with safearray_as_ndarray:
                third = sa[0]
            fourth = sa[0]
        fifth = sa[0]

        self.failUnless(isinstance(first, tuple))
        self.failUnless(isinstance(second, np.ndarray))
        self.failUnless(isinstance(third, np.ndarray))
        self.failUnless(isinstance(fourth, np.ndarray))
        self.failUnless(isinstance(fifth, tuple))
Exemple #50
0
    def get_commit_message(self, parameters, logmessage):
        commonurl = ""
        commonroot = ""
        bugid = ""
        bstrarray = _midlSAFEARRAY(comtypes.BSTR)
        pathlist = bstrarray.from_param(())

        bugtr = self._get_bugtraq_object()
        if bugtr is None:
            return ""
        try:
            if self.supports_bugtraq2_interface():
                (bugid, revPropNames, revPropValues, newmessage) = bugtr.GetCommitMessage2(
                        0, parameters, commonurl, commonroot, pathlist, logmessage, bugid)
            else:
                newmessage = bugtr.GetCommitMessage(
                        0, parameters, commonroot, pathlist, logmessage)
        except COMError:
            qtlib.ErrorMsgBox(_('Issue Tracker Plugin Error'),
                _('Error getting commit message information from Issue Tracker plugin'))
            return ""

        return newmessage
    def test_VT_BOOL(self):
        t = _midlSAFEARRAY(VARIANT_BOOL)

        sa = t.from_param([True, False, True, False])
        self.failUnlessEqual(sa[0], (True, False, True, False))
    def test_VT_BSTR(self):
        t = _midlSAFEARRAY(BSTR)

        sa = t.from_param(["a", "b", "c"])
        self.failUnlessEqual(sa[0], ("a", "b", "c"))
        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_BSTR)
    def test_VT_BOOL(self):
        t = _midlSAFEARRAY(VARIANT_BOOL)

        sa = t.from_param([True, False, True, False])
        self.failUnlessEqual(sa[0], (True, False, True, False))
    def test_VT_BSTR(self):
        t = _midlSAFEARRAY(BSTR)

        sa = t.from_param(["a" ,"b", "c"])
        self.failUnlessEqual(sa[0], ("a", "b", "c"))
        self.failUnlessEqual(SafeArrayGetVartype(sa), VT_BSTR)