def l2circuit_service():
Layer2_circuit = '''
* Provisioning Layer 2 Circuit on local PE and remote PE under groups of L2circuit-services ;
* And apply the Layer 2 Circuit service group on the routers as well.
'''
print(Layer2_circuit)
l2circuit_group = 'set apply-groups L2circuit-services'
l2circuit_local.conf_l2circuit_service_local(local_hostname,
remote_hostname,
junos_username,
junos_password,
local_pe_interface)
l2circuit_remote.conf_l2circuit_service_remote(remote_hostname,
local_hostname,
junos_username,
junos_password,
remote_pe_interface)
group_apply.groups_apply_by_cli(local_hostname, junos_username,
junos_password, l2circuit_group)
group_apply.groups_apply_by_cli(remote_hostname, junos_username,
junos_password, l2circuit_group)
print(
"\n Layer 2 circuit services (vlan id range 10-19) provisioning completed ! "
)
Layer2_circuit_status = '''\n
* Configuration provisioning completed on Layer 2 Circuit services !
* Starting to check the status of all Layer 2 Circuit services ... ...\n'''
print(Layer2_circuit_status)
cc.check_l2circuit(local_hostname, junos_username, junos_password)
cc.check_l2circuit(remote_hostname, junos_username, junos_password)
def nat_service():
nat = '''
* Provisioning NAT service on vlan 39 Layer 3 vpn;
'''
print(nat)
nat_group = 'set apply-groups Nat-l3vpn-service'
nat_pe.conf_nat_service(pe1_hostname, junos_username, junos_password,
pe1_interface, ms_interface)
group_apply.groups_apply_by_cli(pe1_hostname, junos_username,
junos_password, nat_group)
print(
"\n NAT service is provisioning under Layer 3 vpn vlan 39 completed !")
def clean_all_services():
print("\n Clean up all services from provisioning tool ... ")
rm_all_services = '''
delete apply-groups L2circuit-services
delete groups L2circuit-services
delete apply-groups L2vpn-services
delete groups L2vpn-services
delete apply-groups L3vpn-services
delete groups L3vpn-services
delete apply-groups Vpls-services
delete groups Vpls-services
delete apply-groups Ngmvpn-services
delete groups Ngmvpn-services
delete apply-groups Rosen-services
delete groups Rosen-services
delete apply-groups Nat-l3vpn-service
delete groups Nat-l3vpn-service
'''
group_apply.groups_apply_by_cli(pe1_hostname, junos_username,
junos_password, rm_all_services)
group_apply.groups_apply_by_cli(pe2_hostname, junos_username,
junos_password, rm_all_services)
group_apply.groups_apply_by_cli(pe3_hostname, junos_username,
junos_password, rm_all_services)
print("\n Services from provisioning tools are all deleted ! ")
def rosen_service():
rosen = '''
* Provisioning Rosen on PE1, PE2 and PE3 under groups of Rosen-services ;
* And apply the Rosen Multicast service group on the routers as well.
'''
print(rosen)
rosen_group = 'set apply-groups Rosen-services'
rosen_pe1.conf_rosen_service_pe1(pe1_hostname, junos_username,
junos_password, pe1_interface,
pe1_ce_interface)
rosen_pe2.conf_rosen_service_pe2(pe2_hostname, junos_username,
junos_password, pe2_interface,
pe2_ce_interface)
rosen_pe3.conf_rosen_service_pe3(pe3_hostname, junos_username,
junos_password, pe3_interface,
pe3_ce_interface)
group_apply.groups_apply_by_cli(pe1_hostname, junos_username,
junos_password, rosen_group)
group_apply.groups_apply_by_cli(pe2_hostname, junos_username,
junos_password, rosen_group)
group_apply.groups_apply_by_cli(pe3_hostname, junos_username,
junos_password, rosen_group)
print(
"\n Rosen multicast services (vlan id range 52-53) provisioning completed ! "
)
def vpls_service():
vpls = '''
* Provisioning BGP VPLS on PE1, PE2 and PE3 under groups of Vpls-services ;
* And apply the VPLS service group on the routers as well.
'''
print(vpls)
vpls_group = 'set apply-groups Vpls-services'
vpls_pe1.conf_vpls_service_pe1(pe1_hostname, junos_username,
junos_password, pe1_interface,
pe1_ce_interface)
vpls_pe2.conf_vpls_service_pe2(pe2_hostname, junos_username,
junos_password, pe2_interface,
pe2_ce_interface)
vpls_pe3.conf_vpls_service_pe3(pe3_hostname, junos_username,
junos_password, pe3_interface,
pe3_ce_interface)
group_apply.groups_apply_by_cli(pe1_hostname, junos_username,
junos_password, vpls_group)
group_apply.groups_apply_by_cli(pe2_hostname, junos_username,
junos_password, vpls_group)
group_apply.groups_apply_by_cli(pe3_hostname, junos_username,
junos_password, vpls_group)
print("\n VPLS services (vlan id range 40-49) provisioning completed ! ")
vpls_status = '''\n
* Configuration provisioning completed on VPLS services !
* Starting to check the status of all VPLS services ... ...\n'''
print(vpls_status)
cv.check_vpls(pe1_hostname, junos_username, junos_password)
cv.check_vpls(pe2_hostname, junos_username, junos_password)
cv.check_vpls(pe3_hostname, junos_username, junos_password)
def l3vpn_service():
Layer3_vpn = '''
* Provisioning Layer 3 VPN on PE1, PE2 and PE3 under groups of L3vpn-services ;
* And apply the Layer 3 VPN service group on the routers as well.
'''
print(Layer3_vpn)
l3vpn_group = 'set apply-groups L3vpn-services'
l3vpn_pe1.conf_l3vpn_service_pe1(pe1_hostname, junos_username,
junos_password, pe1_interface,
pe1_ce_interface)
l3vpn_pe2.conf_l3vpn_service_pe2(pe2_hostname, junos_username,
junos_password, pe2_interface,
pe2_ce_interface)
l3vpn_pe3.conf_l3vpn_service_pe3(pe3_hostname, junos_username,
junos_password, pe3_interface,
pe3_ce_interface)
group_apply.groups_apply_by_cli(pe1_hostname, junos_username,
junos_password, l3vpn_group)
group_apply.groups_apply_by_cli(pe2_hostname, junos_username,
junos_password, l3vpn_group)
group_apply.groups_apply_by_cli(pe3_hostname, junos_username,
junos_password, l3vpn_group)
print(
"\n Layer 3 VPN services (vlan id range 30-39) provisioning completed ! "
)
Layer3_vpn_status = '''\n
* Configuration provisioning completed on Layer 3 VPN services !
* Starting to check the status of all Layer 3 VPN services ... ...\n'''
print(Layer3_vpn_status)
c3.check_l3vpn(pe1_hostname, junos_username, junos_password)
c3.check_l3vpn(pe2_hostname, junos_username, junos_password)
c3.check_l3vpn(pe3_hostname, junos_username, junos_password)
def ngmvpn_service():
ngmvpn = '''
* Provisioning BGP NG-MVPN on PE1, PE2 and PE3 under groups of Ngmvpn-services ;
* And apply the NG-MVPN service group on the routers as well.
'''
print(ngmvpn)
ngmvpn_group = 'set apply-groups Ngmvpn-services'
ngmvpn_pe1.conf_ngmvpn_service_pe1(pe1_hostname, junos_username,
junos_password, pe1_interface,
pe1_ce_interface)
ngmvpn_pe2.conf_ngmvpn_service_pe2(pe2_hostname, junos_username,
junos_password, pe2_interface,
pe2_ce_interface)
ngmvpn_pe3.conf_ngmvpn_service_pe3(pe3_hostname, junos_username,
junos_password, pe3_interface,
pe3_ce_interface)
group_apply.groups_apply_by_cli(pe1_hostname, junos_username,
junos_password, ngmvpn_group)
group_apply.groups_apply_by_cli(pe2_hostname, junos_username,
junos_password, ngmvpn_group)
group_apply.groups_apply_by_cli(pe3_hostname, junos_username,
junos_password, ngmvpn_group)
print(
"\n NG-MVPN services (vlan id range 50-51) provisioning completed ! ")