def calculateKDE(self, kernel='gaussian', bandwidth=None):
"""
Calculate the Kernel Density Estimation.
This will generate a high-resolution "image" of the localisations
based on the kernel density estimate of the point localisations.
If no bandwidth is specified an optimal bandwidth parameter is estimated
using cross-validation. This is the default behaviour.
Input:
kernel (str): Kernel to be used for the kernel density estimation
Possible values are 'gaussian' (default) and 'tophat'
bandwidth (float,None): The bandwidth for the kernel density estimation
If set to None cross-validation will be used
to find the optimal parameter.
"""
if not self.runCluster:
print('You need to run the clustering first!')
return
if self.contour is not None:
print("It seems as if you already set up a pixel image.")
print("Use resetImage() and try again")
return
self.contour = Contour()
self.contour.setData(self.cluster.getResult(self.edgePoints))
self.contour.kernelDensityEstimate(kernel=kernel, bandwidth=bandwidth)
def test_internal_diagonals(self):
cseg1 = Contour([0, 2, 3, 1])
cseg2 = Contour([1, 0, 4, 3, 2])
self.assertEqual(cseg1.internal_diagonals(1), InternalDiagonal([1, 1, -1]))
self.assertEqual(cseg1.internal_diagonals(2), InternalDiagonal([1, -1]))
self.assertEqual(cseg2.internal_diagonals(1), InternalDiagonal([-1, 1, -1, -1]))
self.assertEqual(cseg2.internal_diagonals(2), InternalDiagonal([1, 1, -1]))
def add_date_2d(self,
x_values,
y_values,
z_values,
dates_ticks=[],
stns_ticks=[],
cmap='',
time_unit='month',
interval="equal",
value_type="raw",
colorbar_max=30,
colorbar_min=0,
colorbar_interval=2):
levels = np.linspace(colorbar_min, colorbar_max,
(colorbar_max - colorbar_min) + 1)
cont = Contour(self)
plt.xticks(x_values[0], dates_ticks, fontsize=11)
plt.yticks(zip(*y_values)[0],
stns_ticks,
fontproperties=font,
fontsize=9)
cmap = plt.get_cmap(cmap)
#print z_values
#print x_values
#print y_values
cs = cont.contour_plotting(x_values, y_values, z_values, levels, cmap)
cbar = self.fig.colorbar(cs)
colorbar_range = list(
self.get_colorbar_range(colorbar_max, colorbar_min,
colorbar_interval))
cbar.set_ticks(colorbar_range)
cbar.set_ticklabels(map(str, colorbar_range))
def test_comparison_matrix(self):
cseg1 = Contour([0, 2, 3, 1])
cseg2 = Contour([1, 2, 3, 0, 3, 1])
result1 = ComparisonMatrix([[0, 1, 1, 1], [-1, 0, 1, -1], [-1, -1, 0, -1], [-1, 1, 1, 0]])
result2 = ComparisonMatrix([[0, 1, 1, -1, 1, 0], [-1, 0, 1, -1, 1, -1], [-1, -1, 0, -1, 0, -1],
[1, 1, 1, 0, 1, 1], [-1, -1, 0, -1, 0, -1], [0, 1, 1, -1, 1, 0]])
self.assertEqual(cseg1.comparison_matrix(), result1)
self.assertEqual(cseg2.comparison_matrix(), result2)
def __add_contour():
self.is_fit = False
cont = Contour(pil_image=self.canvas_initial_state,
name='Contour' + str(len(self.contours) + 1))
if cont.size() > 0:
self.contours.append(cont)
cont.dump(self.project_path)
self.apply_contours()
def test_subsets_normal(self):
cseg = Contour([0, 3, 1, 4, 2])
result = {(0, 1, 3, 2): [Contour([0, 1, 4, 2])],
(0, 2, 1, 3): [Contour([0, 3, 1, 4])],
(0, 2, 3, 1): [Contour([0, 3, 4, 2])],
(0, 3, 1, 2): [Contour([0, 3, 1, 2])],
(2, 0, 3, 1): [Contour([3, 1, 4, 2])]}
self.assertEqual(cseg.subsets_normal(4), result)
def __init__(self, name="", samples=0, use_spline=False):
Contour.__init__(self)
self.name = ""
self.description = ""
# parametric representation of the airfoil dist along surface
# vs. x and vs. y
self.parax = []
self.paray = []
self.nosedist = 0.0
if (name != ""):
self.load(name, samples, use_spline)
def __init__(self, name = "", samples = 0, use_spline = False):
Contour.__init__(self)
self.name = ""
self.description = ""
# parametric representation of the airfoil dist along surface
# vs. x and vs. y
self.parax = []
self.paray = []
self.nosedist = 0.0
if ( name != "" ):
self.load(name, samples, use_spline)
def test_reduction_bor(self):
cseg1 = Contour([0, 6, 1, 4, 3, 5, 2])
cseg2 = Contour([12, 10, 13, 11, 7, 9, 8, 6, 3, 5, 4, 1, 0, 2])
cseg3 = Contour([7, 10, 9, 0, 2, 3, 1, 8, 6, 2, 4, 5])
self.assertEqual(cseg1.reduction_bor(53), [Contour([0, 2, 1]), 2])
self.assertEqual(cseg1.reduction_bor(35), [Contour([0, 3, 2, 1]), 2])
self.assertEqual(cseg2.reduction_bor(53, False), [Contour([12, 10, 13, 0, 2]), 2])
self.assertEqual(cseg3.reduction_bor(35, False), [Contour([7, 10, 0, 8, 5]), 2])
self.assertEqual(cseg3.reduction_bor(35, True), [Contour([2, 4, 0, 3, 1]), 2])
self.assertEqual(cseg2.reduction_bor(53, False), [Contour([12, 10, 13, 0, 2]), 2])
self.assertEqual(cseg3.reduction_bor(355, False), [Contour([7, 10, 0, 5]), 3])
self.assertEqual(cseg3.reduction_bor(555, True), [Contour([2, 3, 0, 1]), 3])
def get_contour(reset=False):
""" Gets existing contour data """
contour = Contour()
if reset:
return contour
contour_data_file = os.path.join(cli.world_dir, cli.contour_file_name)
try:
contour.read(contour_data_file)
except (EnvironmentError, ContourLoadError), e:
if e.errno != errno.ENOENT:
error('could not read contour data: %s' % e)
def __init__(self, name="", samples=0, use_spline=False):
Contour.__init__(self)
# locate airfoils data path relative to top level script
datapath = os.path.split(os.path.abspath(sys.argv[0]))[0] + "/data"
self.datapath = datapath
self.name = ""
self.description = ""
# parametric representation of the airfoil dist along surface
# vs. x and vs. y
self.parax = []
self.paray = []
self.nosedist = 0.0
if (name != ""):
self.load(name, samples, use_spline)
def __init__(self, name = "", samples = 0, use_spline = False):
Contour.__init__(self)
# locate airfoils data path relative to top level script
datapath = os.path.split(os.path.abspath(sys.argv[0]))[0] + "/data"
self.datapath = datapath
self.name = ""
self.description = ""
# parametric representation of the airfoil dist along surface
# vs. x and vs. y
self.parax = []
self.paray = []
self.nosedist = 0.0
if ( name != "" ):
self.load(name, samples, use_spline)
def test_fuzzy_membership_matrix(self):
cseg1 = Contour([0, 2, 3, 1])
cseg2 = Contour([1, 2, 3, 0, 3, 1])
result1 = FuzzyMatrix([[0, 1, 1, 1],
[0, 0, 1, 0],
[0, 0, 0, 0],
[0, 1, 1, 0]])
result2 = FuzzyMatrix([[0, 1, 1, 0, 1, 0],
[0, 0, 1, 0, 1, 0],
[0, 0, 0, 0, 0, 0],
[1, 1, 1, 0, 1, 1],
[0, 0, 0, 0, 0, 0],
[0, 1, 1, 0, 1, 0]])
self.assertEqual(cseg1.fuzzy_membership_matrix(), result1)
self.assertEqual(cseg2.fuzzy_membership_matrix(), result2)
def process(self, frame, name="TrainingSamples/Image_"):
# preprocessing for contour detection
preprocessed = PreProcessing().background_contour_removal(frame)
# find contours using algorithm by Suzuki et al. (1985)
contours, hierarchy = cv.findContours(preprocessed, cv.RETR_TREE,
cv.CHAIN_APPROX_NONE)
# limit observed contours
if len(contours) > 500:
contours = contours[:500]
# ignore first contour, as it is outer border of the frame
contours = contours[1:]
hierarchy = hierarchy[0][1:] - 1
hierarchy = np.where(hierarchy < 0, -1, hierarchy)
if len(contours) == 0:
return preprocessed
# initialize contour object from each contour in contour list
binarized = PreProcessing().custom_binarize(frame)
contourList = [
Contour(contour=cnt, imgShape=frame.shape, frameBinary=binarized)
for cnt in contours
]
# filter, classify and group segmented contours
sg = Segmentation(contourList, hierarchy, frame.shape)
sg.group_and_classify()
filtered = sg.get_contours()
if len(filtered) == 0:
return preprocessed
# colouring preprocessing for ease in debugging
preprocessed = cv.cvtColor(preprocessed, cv.COLOR_GRAY2BGR)
lines = LineOrdering(filtered).get_lines(frame)
# label contours with additional positional information
lines = sg.label_contours(lines)
for l in range(len(lines)):
line = lines[l]
for i in range(len(line)):
cnt = line[i]
cv.putText(frame,
str(l) + str(i), (cnt.center[0], cnt.center[1]),
cv.FONT_HERSHEY_SIMPLEX, 1, (0, 255, 0), 1)
solutions = [
self.solver.solve([cnt.unwrap() for cnt in line], frame)
for line in lines if len(line) > 2
]
return preprocessed # orderedImage
def addAIPolygon(self, points):
qPoints = [QtCore.QPoint(x,y) for x,y in points]#
if len(self.polys) ==0:
if self.QGitem is None:
self.QGitem = Contour(point_size=1.5)
self.addItem(self.QGitem)
self.updatePolyPoint(self.QGitem, qPoints[0])
self.QGitem.setZValue(len(self.polys) + 1)
self.QGitem.prepareGeometryChange()
self.QGitem.points = qPoints
self.QGitem.addPoint((qPoints[0]))
else:
self.QGitem = self.polys[0]
self.QGitem.prepareGeometryChange()
self.QGitem.points = qPoints
self.QGitem.addPoint((qPoints[0]))
self.finalisePolygon()
self.update()
def add_date_2d(self, x_values, y_values, z_values, dates_ticks=[], stns_ticks=[], cmap='',
time_unit='month', interval="equal", value_type="raw",
colorbar_max=30, colorbar_min=0, colorbar_interval=2):
levels = np.linspace(colorbar_min, colorbar_max, (colorbar_max-colorbar_min)+1)
cont = Contour(self)
plt.xticks(x_values[0], dates_ticks, fontsize=11)
plt.yticks(zip(*y_values)[0], stns_ticks, fontproperties=font, fontsize=9)
cmap = plt.get_cmap(cmap)
#print z_values
#print x_values
#print y_values
cs = cont.contour_plotting(x_values, y_values, z_values, levels, cmap)
cbar = self.fig.colorbar(cs)
colorbar_range = list(self.get_colorbar_range(colorbar_max, colorbar_min, colorbar_interval))
cbar.set_ticks(colorbar_range)
cbar.set_ticklabels(map(str, colorbar_range))
def find_contours(self, method=cv2.CHAIN_APPROX_NONE):
image_rgb = self._blur_original_image()
channels = self._get_single_channel_images(image_rgb)
edges = self._combined_edges(channels)
_, contours, hierarchy = cv2.findContours(edges,
mode=cv2.RETR_EXTERNAL,
method=method)
contours = [Contour(points) for points in contours]
contours = [cont for cont in contours if self.area_filter_accept(cont)]
return sorted(contours,
key=lambda c: c.measurements().area,
reverse=True), edges
def main(onlyfiles=None):
if (onlyfiles == None):
mypath = getcwd() + r'/pdfs/'
onlyfiles = [f for f in listdir(mypath) if isfile(join(mypath, f))]
print(onlyfiles)
for file in onlyfiles:
if (utils.getFileType(file) == '.PDF'
or utils.getFileType(file) == '.pdf'):
utils.pdfToImg(file)
else:
utils.saveImgOnRightFolder(file)
utils.invertColor(file)
a = Contour(file)
a.start()
newContours = a.filterCountours()
a.saveContours(newContours)
a.saveCSVs(newContours)
def computeMask(self):
self.corners = np.array(self.corners)
self.contour = Contour(
np.array([self.corners[:, 1], self.corners[:, 0]]).transpose(),
(self.height, self.width))
self.mask = self.contour.interior
if (debug):
plt.figure(figsize=(15, 30))
plt.subplot(131)
plt.imshow(self.contour.array, cmap="gray")
plt.title("Hull")
plt.subplot(132)
plt.imshow(self.mask, cmap="gray")
plt.title("Mask")
plt.subplot(133)
if (self.n == 1):
plt.imshow(self.image * self.mask, cmap="gray")
else:
im = mycv2.cvtBGRtoRGB(self.image) * np.array(
[self.mask for i in range(self.n)]).transpose(1, 2, 0)
plt.imshow(im.astype(np.float32), norm=None)
plt.title("Masked image")
plt.show()
def test_class_vector_ii(self):
cseg = Contour([0, 1, 3, 2])
self.assertEqual(cseg.class_vector_ii(), [5, 1])
% (len(shapefiles), len(intensity), len(be), len(hh)))
# Maybe I can collect all the shapefiles into one database?
# All the intensity files can be in a VRT
print("Processing Bare Earth")
be_folder = os.path.join(datadir, "be")
if not os.path.exists(be_folder):
os.mkdir(be_folder)
s = Surface(overwrite=False)
betiff = s.grid_to_tiff(be, be_folder)
s = None
print("Building mosaic")
vrt = gdal.BuildVRT(os.path.join(datadir,"be.vrt"), betiff)
print("Processing Highest Hits")
hh_folder = os.path.join(datadir, "hh")
if not os.path.exists(hh_folder):
os.mkdir(hh_folder)
s = Surface(overwrite=False)
hhtiff = s.grid_to_tiff(hh, hh_folder)
s = None
print("Building mosaic")
vrt = gdal.BuildVRT(os.path.join(datadir,"hh.vrt"), hhtiff)
c = Contour()
c.build()
pass
import cv2
from preprocessing import Preprocess
from thresholding import Threshold
from smoothing import Smooth
from contour import Contour
from decision import Decision
import os
SAMPLE_IMAGE = 'thresh1.jpg'
frame = cv2.imread(SAMPLE_IMAGE, cv2.IMREAD_UNCHANGED)
thresholded_image = frame
smooth_image = Smooth().smoothing(thresholded_image)
contour = Contour().find_contours(smooth_image)
center, radius, probability = Decision().decision(contour, smooth_image)
if radius is not 0:
# cv2.putText(frame, str(probability * 100) + '%', center, cv2.FONT_HERSHEY_PLAIN, 1, (255, 0, 0), 2)
print("Probability: " + str(probability * 100) + '%')
cv2.circle(frame, center, radius, (255, 0, 0), 2)
cv2.imshow('Main video', frame)
cv2.waitKey(0)
cv2.destroyAllWindows()
def add_map(self, values, selected_stations, map_lat_max, map_lat_min, map_lon_max, map_lon_min, color="#000000", filled=True):
map = Map(self)
self.fig.subplots_adjust(top=0.93)
ulat, llat, ulon, llon = map_lat_max, map_lat_min, map_lon_max, map_lon_min
m = Basemap(projection='merc', llcrnrlat=llat,
urcrnrlat=ulat,
llcrnrlon=llon,
urcrnrlon=ulon,
resolution='i')
#cm = mpl.cm.get_cmap(self.colorbar_type)
# cdict = {'red': ((0., 0, 0), (0.4, 1, 1),(0.6, 1, 1),(1, 0.5, 0.5)),
# 'green': ((0., 0, 0),(0.4, 1, 1), (0.6, 1, 1), (1, 0, 0)),
# 'blue': ((0., 1, 1),(0.4, 1, 1), (0.6, 1, 1), (1, 0, 0))}
# cm = mpl.colors.LinearSegmentedColormap('my_colormap', cdict, 256)
if 'TWN_COUNTY' in self.shapefile:
m.readshapefile(self.shapefile['TWN_COUNTY']['path'], 'TWN_COUNTY',
color=self.shapefile['TWN_COUNTY']['color'])
if 'TWN_adm0' in self.shapefile:
m.readshapefile(self.shapefile['TWN_adm0']['path'], 'TWN_adm0',
color=self.shapefile['TWN_adm0']['color'])
m.fillcontinents(color="#FFFFFF", zorder=0)
xlist, ylist, clist, stlist = self._read_coordinate(m, values, selected_stations)
s = plt.scatter(xlist, ylist, s=14, marker='x', zorder=2, color=color)
m.drawmapboundary(fill_color="#F0F8FF", zorder=5)
if filled:
levels = np.linspace(0, 40, 41)
cont = Contour(self)
cm = mpl.cm.get_cmap('YlGnBu')
cmap = plt.get_cmap(cm)
x_min, y_min = m(map_lon_min, map_lat_min+0.0000001)
x_max, y_max = m(map_lon_max, map_lat_max)
x2 = np.array(np.linspace(x_min, x_max, (map_lon_max-map_lon_min)*10+1))
y2 = np.array(np.linspace(y_min, y_max, (map_lat_max-map_lat_min)*10+1))
x3, y3 = np.meshgrid(x2, y2)
wait_to_fill_values = [True] * len(clist)
#z_values = np.zeros((len(y2), len(x2)))
z_values = np.random.randint(40, size=(len(y2), len(x2)))
# 先判斷是否有在裡面 沒有的話畫空白值?
# 也許不要contourf，用polygon
# 內插的方法
for i, x in enumerate(x2):
for j, y in enumerate(y2):
for idx, value in enumerate(clist): #stlist
if wait_to_fill_values[idx] and x > xlist[idx] and y> ylist[idx]:
wait_to_fill_values[idx] = False
z_values[j][i] = float(value)
break
cs = cont.contour_plotting(x3, y3, z_values, levels, cmap)
cbar = self.fig.colorbar(cs)
colorbar_range = list(self.get_colorbar_range(40, 0, 5))
cbar.set_ticks(colorbar_range)
#cbar.set_ticklabels(map(str, colorbar_range))
# add text
self._add_station_texts({'x':xlist, 'y':ylist, 'stn':stlist, 'value':clist})
def mousePressEvent(self, event):
pos = event.scenePos()
if event.button() == QtCore.Qt.LeftButton and self.mode == self.modes[1]:
self.overrideCursor(QtCore.Qt.CrossCursor)
if self.line is None or self.polyFinished:
self.line = Contour(point_size=1.5)
self.addItem(self.line)
self.updatePolyPoint(self.line, pos)
elif self.line and not self.polyFinished:
self.line.prepareGeometryChange()
self.line.points[0] = pos
self.line.setPos(pos)
if self.QGitem:
self.QGitem.prepareGeometryChange()
if len(self.QGitem.points) >1 and self.isClose(pos, self.QGitem.points[0]):
self.overrideCursor(QtCore.Qt.PointingHandCursor)
pos = self.QGitem.points[0]
self.QGitem.highlightVertex(0)
#need to add to close the polygone
self.QGitem.addPoint(pos)
if self.QGitem.points[0] == pos:
self.finalisePolygon()
else:
self.QGitem = Contour(point_size=1.5)
self.addItem(self.QGitem)
self.updatePolyPoint(self.QGitem, pos)
self.QGitem.setZValue(len(self.polys)+1)
event.accept()
self.update()
if event.button() == QtCore.Qt.RightButton and self.mode == self.modes[1]:
self.overrideCursor(QtCore.Qt.CrossCursor)
if self.line:
if len(self.line.points) > 1 and self.QGitem:
self.QGitem.prepareGeometryChange()
self.QGitem.remove(-1)
if self.QGitem.points==1:
self.removeItem(self.QGitem)
self.removeItem(self.line)
self.line=None
return
self.line.prepareGeometryChange()
self.line.points[0] =self.QGitem.points[-1]
event.accept()
self.update()
if self.mode == self.modes[2] and event.button() == QtCore.Qt.LeftButton:
self.overrideCursor(QtCore.Qt.ClosedHandCursor)
self.selectShapeByPoint(pos)
event.accept()
self.update()
if self.mode == self.modes[2] and event.button() == QtCore.Qt.MiddleButton:
self.overrideCursor(QtCore.Qt.CrossCursor)
if len(self.polys) > 0:
self.selectedContour = self.polys[0]
pts = self.getClosestPoint(pos)
self.selectedContour.points.insert(pts[1], pos)
if self.vertexSelected() and event.button() == QtCore.Qt.RightButton and self.mode == self.modes[2]:
self.overrideCursor(QtCore.Qt.PointingHandCursor)
self.selectedContour.prepareGeometryChange()
self.selectedContour.remove(self.selectedVertex)
if len(self.selectedContour.points) ==1:
self.removeItem(self.selectedContour)
self.update()
def test_interval_succession(self):
cseg = Contour([0, 1, 3, 2])
self.assertEqual(cseg.interval_succession(), [1, 2, -1])
def loadPixelImage(self,
fname,
pixelSize=1.0,
start=None,
end=None,
padding=[20, 20]):
"""
Load a pixel image into the pipeline.
Instead of generating a super-resolved image from point localisation
data the pipeline can load any pixel image instead. The consecutive
steps of contour fitting and curvature calculation can then be used
on this input.
Input:
fname (str): Image file to load
pixelSize (float): Set the pixel size in nm
start (int): The first frame to load
end (int): The last frame to include
padding (list): Must be a list of two int specifying the width
in pixels of the dark region that will be added
to the images at the outside edges. This is done
to allow the constricting contour fitting to fully
close on objects even if they are extending out
of the frame.
"""
if self.contour is not None:
print("It seems as if you already set up a pixel image.")
print("Use resetImage() and try again")
return
# Set the name of the object
self.name = fname
# Load the image file using tifffile.py
tmpImage = Tiff.TiffFile(fname)
self.images = [tmpImage[i].asarray() for i in range(len(tmpImage))]
self.images = self.RGBtoGreyscale(self.images)
# Select the frame range
if start is None:
start = 1
if end is None:
end = len(self.images)
self.images = self.images[start - 1:end]
# Save the number of frames
self.nrOfFrames = len(self.images)
# Add some dark pixel paddings around the image. This makes contour
# detection easier if the object is extending out of the image border.
if padding:
xpad, ypad = padding
newImages = list()
for image in self.images:
# Create arrays containing zeros
zerosX = np.zeros([np.shape(image)[0], xpad])
zerosY = np.zeros([ypad, np.shape(image)[1] + 2 * xpad])
# Add them to the original image
newImage = np.concatenate([zerosX, image, zerosX], axis=1)
newImage = np.concatenate([zerosY, newImage, zerosY], axis=0)
# Add the padded image to the list
newImages.append(newImage)
# Replace the original images with the padded ones.
self.images = newImages
# Initialise the Contour class and set the images
self.contour = Contour()
self.contour.images = self.images
self.contour.pixelSize = [float(pixelSize), 0.0, float(pixelSize), 0.0]
print("Finished loading %d frames from %s" % (len(self.images), fname))
return
def add_map(self,
values,
selected_stations,
map_lat_max,
map_lat_min,
map_lon_max,
map_lon_min,
color="#000000",
filled=True):
map = Map(self)
self.fig.subplots_adjust(top=0.93)
ulat, llat, ulon, llon = map_lat_max, map_lat_min, map_lon_max, map_lon_min
m = Basemap(projection='merc',
llcrnrlat=llat,
urcrnrlat=ulat,
llcrnrlon=llon,
urcrnrlon=ulon,
resolution='i')
#cm = mpl.cm.get_cmap(self.colorbar_type)
# cdict = {'red': ((0., 0, 0), (0.4, 1, 1),(0.6, 1, 1),(1, 0.5, 0.5)),
# 'green': ((0., 0, 0),(0.4, 1, 1), (0.6, 1, 1), (1, 0, 0)),
# 'blue': ((0., 1, 1),(0.4, 1, 1), (0.6, 1, 1), (1, 0, 0))}
# cm = mpl.colors.LinearSegmentedColormap('my_colormap', cdict, 256)
if 'TWN_COUNTY' in self.shapefile:
m.readshapefile(self.shapefile['TWN_COUNTY']['path'],
'TWN_COUNTY',
color=self.shapefile['TWN_COUNTY']['color'])
if 'TWN_adm0' in self.shapefile:
m.readshapefile(self.shapefile['TWN_adm0']['path'],
'TWN_adm0',
color=self.shapefile['TWN_adm0']['color'])
m.fillcontinents(color="#FFFFFF", zorder=0)
xlist, ylist, clist, stlist = self._read_coordinate(
m, values, selected_stations)
s = plt.scatter(xlist, ylist, s=14, marker='x', zorder=2, color=color)
m.drawmapboundary(fill_color="#F0F8FF", zorder=5)
if filled:
levels = np.linspace(0, 40, 41)
cont = Contour(self)
cm = mpl.cm.get_cmap('YlGnBu')
cmap = plt.get_cmap(cm)
x_min, y_min = m(map_lon_min, map_lat_min + 0.0000001)
x_max, y_max = m(map_lon_max, map_lat_max)
x2 = np.array(
np.linspace(x_min, x_max,
(map_lon_max - map_lon_min) * 10 + 1))
y2 = np.array(
np.linspace(y_min, y_max,
(map_lat_max - map_lat_min) * 10 + 1))
x3, y3 = np.meshgrid(x2, y2)
wait_to_fill_values = [True] * len(clist)
#z_values = np.zeros((len(y2), len(x2)))
z_values = np.random.randint(40, size=(len(y2), len(x2)))
# 先判斷是否有在裡面 沒有的話畫空白值?
# 也許不要contourf，用polygon
# 內插的方法
for i, x in enumerate(x2):
for j, y in enumerate(y2):
for idx, value in enumerate(clist): #stlist
if wait_to_fill_values[
idx] and x > xlist[idx] and y > ylist[idx]:
wait_to_fill_values[idx] = False
z_values[j][i] = float(value)
break
cs = cont.contour_plotting(x3, y3, z_values, levels, cmap)
cbar = self.fig.colorbar(cs)
colorbar_range = list(self.get_colorbar_range(40, 0, 5))
cbar.set_ticks(colorbar_range)
#cbar.set_ticklabels(map(str, colorbar_range))
# add text
self._add_station_texts({
'x': xlist,
'y': ylist,
'stn': stlist,
'value': clist
})
def test_reduction_window(self):
cseg1 = Contour([7, 10, 9, 0, 2, 3, 1, 8, 6, 2, 4, 5])
cseg2 = Contour([7, 10, 0, 1, 8, 2, 5])
cseg3 = Contour([7, 10, 0, 8, 5])
cseg4 = Contour([7, 10, 0, 5])
cseg5 = Contour([0, 3, 3, 1, 2, 4])
cseg6 = Contour([0, 3, 1, 4])
cseg7 = Contour([0, 3, 3, 1, 2])
cseg8 = Contour([0, 3, 1, 2])
cseg9 = Contour([12, 10, 13, 11, 7, 9, 8, 6, 3, 5, 4, 1, 0, 2])
cseg10 = Contour([12, 10, 13, 7, 3, 0, 2])
cseg11 = Contour([0, 2, 1, 3])
self.assertEqual(cseg1.reduction_window(3, False), Contour([7, 10, 0, 3, 1, 8, 2, 5]))
self.assertEqual(cseg1.reduction_window(3, True), Contour([5, 7, 0, 3, 1, 6, 2, 4]))
self.assertEqual(cseg1.reduction_window(5, False), cseg2)
self.assertEqual(cseg2.reduction_window(5, False), cseg3)
self.assertEqual(cseg3.reduction_window(5, False), cseg4)
self.assertEqual(cseg5.reduction_window(5, False), cseg6)
self.assertEqual(cseg7.reduction_window(5, False), cseg8)
self.assertEqual(cseg9.reduction_window(5, False), cseg10)
self.assertEqual(cseg5.reduction_window(5, True), cseg11)
def test_cps_position(self):
cseg = Contour([2, 8, 12, 9, 5, 7, 3, 12, 3, 7])
result = [(2, 0), (8, 1), (12, 2), (9, 3), (5, 4),
(7, 5), (3, 6), (12, 7), (3, 8), (7, 9)]
self.assertEqual(cseg.cps_position(), result)
def test_adjacency_series_vector(self):
cseg1 = Contour([0, 2, 3, 1])
cseg2 = Contour([1, 2, 3, 0, 3, 1])
self.assertEqual(cseg1.adjacency_series_vector(), [2, 1])
self.assertEqual(cseg2.adjacency_series_vector(), [3, 2])
def test_class_representatives(self):
cseg = Contour([0, 1, 3, 2])
result = [Contour([0, 1, 3, 2]), Contour([3, 2, 0, 1]), Contour([2, 3, 1, 0]), Contour([1, 0, 2, 3])]
self.assertEqual(cseg.class_representatives(), result)
class ActiveContours():
def __init__(self, frames, path, spechist=False):
self.path = path
self.frames = self.preprocess(frames, spechist)
if (len(self.frames[0].shape) == 2):
self.shape = self.frames[0].shape
elif (len(self.frames[0].shape) == 3):
self.shape = self.frames[0].shape[:-1]
else:
raise ValueError("Frames shapes unvalid : " +
str(self.frames[0].shape))
def preprocess(self, frames, spechist=False):
if (spechist):
specification = SpecHist(frames[0])
return [
cv2.blur(
mycv2.resize(specification.specify(image),
PARAMS["activeContours"]["maxwidth"]), (7, 7))
for image in frames
]
else:
self.noblurframes = [
mycv2.resize(image, PARAMS["activeContours"]["maxwidth"])
for image in frames
]
return [cv2.blur(image, (7, 7)) for image in self.noblurframes]
def run(self):
self.mask = Mask(self.frames[0])
if (PARAMS["verbose"]): self.mask.render("contour")
self.mask.computeDensity()
if (PARAMS["debug"]): self.mask.render("density")
self.currentcontour = self.mask.contour
RESULT = []
for i in range(0, len(self.frames)):
RESULT += [self.computeSimpleFlow(i)]
print(RESULT[0].shape, "SHAPE ", vid.getFPS(self.path), "FPS")
print([r.shape for r in RESULT])
shape = (int(RESULT[0].shape[0] * 2), int(RESULT[0].shape[1]))
print(shape)
out = cv2.VideoWriter('output.avi', cv2.VideoWriter_fourcc(*'XVID'),
vid.getFPS(self.path), (512, 512))
print(vid.getFPS(self.path), shape)
for f, res in zip(self.noblurframes, RESULT):
res3 = np.array([res, res, res]).transpose(1, 2, 0) * 255
newf = cv2.resize(np.uint8(np.concatenate([f, res3], axis=0)),
(512, 512))
#plt.imshow(newf[:, :, ::-1])
#plt.show()
out.write(newf)
out.release()
def computeSimpleFlow(self, i):
print("computeSimpleFlow", i, " ", int(100 * i / len(self.frames)),
"%")
frame = self.frames[i]
#plt.imshow(frame[:, :, ::-1])
#plt.show()
"""
FD = np.zeros(self.shape)
for px in range(self.shape[0]):
for py in range(self.shape[1]):
FD[px, py] = self.mask.getDensity(frame[px, py])
plt.figure(figsize = (10, 5))
plt.subplot(121)
plt.imshow(FD, cmap = "gray")
plt.subplot(122)
plt.imshow(FD > 0, cmap = "gray")
plt.show()
"""
"""
while(nchanges > 0 and nite < 10):
nadded, nremoved = 0, 0
newpoints = self.currentcontour.get("points").copy()
normals = self.currentcontour.get("normals").copy()
for i in range(len(newpoints)):
dc = self.mask.getDensity(frame[newpoints[i][0], newpoints[i][1]]) - self.mask.lambd
if(dc < 0):
newpoints[i] = self.currentcontour.getPixelToNormal(newpoints[i], - normals[i]).copy()
nremoved += 1
else:
p_n = self.currentcontour.getPixelToNormal(newpoints[i], normals[i]).copy()
dc_p_n = self.mask.getDensity(frame[p_n[0], p_n[1]]) - self.mask.lambd
if(dc_p_n > 0):
newpoints[i] = p_n.copy()
nadded += 1
self.currentcontour = Contour(newpoints, self.shape)
nite += 1
nchanges = nadded + nremoved
print(nite, nadded, nremoved, len(self.currentcontour.get("points")))
#if(PARAMS["verbose"]):self.currentcontour.render()
#if(PARAMS["verbose"]):self.currentcontour.render()
"""
def getPiDC(pi, ni, nax):
DC = np.zeros(2 * nax + 1)
Pi = np.zeros((2 * nax + 1, 2))
DC[nax] = np.sign(
self.mask.getDensity(frame[pi[0], pi[1]]) - self.mask.lambd)
Pi[nax] += pi
for j in range(1, nax + 1):
temppi = self.currentcontour.getPixelToNormal(
Pi[nax + j - 1], ni).copy().astype(int)
Pi[nax + j] = temppi.copy()
tempdc = self.mask.getDensity(
frame[temppi[0] % self.shape[0],
temppi[1] % self.shape[1]]) - self.mask.lambd
DC[nax + j] += np.sign(tempdc)
temppi = self.currentcontour.getPixelToNormal(
Pi[nax - j + 1], -ni).copy().astype(int)
Pi[nax - j] = temppi.copy()
tempdc = self.mask.getDensity(
frame[temppi[0] % self.shape[0],
temppi[1] % self.shape[1]]) - self.mask.lambd
DC[nax - j] += np.sign(tempdc)
return Pi, DC
points = self.currentcontour.get("points").copy()
normals = self.currentcontour.get("normals").copy()
print(len(points))
findeps = []
#findepm1 = 0
changepoints = []
#for i in range(len(newpoints)):
nbloc = 10
nax = 10
nnewpoints = max(10, int(0.05 * len(points)))
for i in np.linspace(0, len(points), nnewpoints + 1).astype(int)[:-1]:
findepii = []
for ii in range(-nbloc, nbloc + 1):
pi = points[(i + ii) % len(points)].copy()
ni = normals[(i + ii) % len(normals)].copy()
Pi, DC = getPiDC(pi, ni, nax)
if (ii == 0):
Pi0 = Pi.copy()
dep = []
for j in range(nax):
if (DC[j] < 0 and DC[j + 1] > 0):
dep += [j + 1]
for j in range(1, nax + 1):
if (DC[nax + j] < 0 and DC[nax + j - 1] > 0):
dep += [nax + j - 1]
if (np.sum(DC) == len(DC)):
dep += [len(DC) - 1]
if (np.sum(DC) == -len(DC)):
dep += [0]
if (len(dep) == 0):
dep += [nax]
dep = np.array(dep)
if (np.sum(dep < nax) > np.sum(dep > nax)):
dep = dep[dep < nax]
elif (np.sum(dep < nax) < np.sum(dep > nax)):
dep = dep[dep > nax]
else:
dep = [nax]
findepii += [np.median(dep)]
findep = int(np.median(findepii))
"""
if(i != 0):
if(findep > findepm1 + 5):
findep = findepm1 + 5
elif(findep < findepm1 - 5):
findep = findepm1 - 5
findepm1 = findep
"""
findeps += [findep]
#newpoints[i] = Pi[findep].copy()
changepoints += [Pi0[findep].copy()]
"""
dc = self.mask.getDensity(frame[pi[0], pi[1]]) - self.mask.lambd
nite = 0
if(dc < 0):
while(dc < 0 and nite < 50):
pi = self.currentcontour.getPixelToNormal(pi, - ni).copy()
dc = self.mask.getDensity(frame[pi[0] % self.shape[0], pi[1] % self.shape[1]]) - self.mask.lambd
nite += 1
else:
while(dc > 0 and nite < 50):
pi = self.currentcontour.getPixelToNormal(pi, ni).copy()
dc = self.mask.getDensity(frame[pi[0], pi[1]]) - self.mask.lambd
nite += 1
if(nite < 50):newpoints[i] = pi.copy()
"""
#plt.plot(np.arange(len(findeps)), np.array(findeps) - 25)
#plt.show()
self.currentcontour = Contour(changepoints, self.shape)
if (PARAMS["verbose"]): self.currentcontour.render()
return self.currentcontour.interior.copy()
def simulateContours(self, contour, numberContours, centroid):
"""! Metodo que genera poligonos de shapely en base a una simulacion de crecimiento/decrecimiento de un contorno de forma sinusoidal
@param contour Contorno inicial
@param numberContours Numero de contornos a simular
@param centroid Punto del centroide
@return Lista de poligonos de shapely construidos.
"""
contours_list = []
distances = []
N = numberContours # number of data points
times = np.linspace(0, 2 * np.pi, N)
f = 1.15247 # Optional!! Advised not to use
data = 3.0 * np.sin(f * times + 0.001) + 0.5 + np.random.randn(
N) # create artificial data with noise
guess_mean = np.mean(data)
guess_std = 3 * np.std(data) / (2**0.5) / (2**0.5)
guess_phase = 0
oscillationSine = guess_std * np.sin(times + guess_phase) + guess_mean
print("TIMES : " + str(len(times)) + "tipo " + str(times[0]))
print(times)
print("SINE : " + str(len(oscillationSine)) + "tipo " +
str(oscillationSine[0]))
print(oscillationSine)
firstContour = Contour(contour, self.blueColor, "first")
contours_list.append(firstContour)
maxValue = -100.0
for i, value in enumerate(oscillationSine):
if i + 1 < len(oscillationSine):
sinusoidePoint = (times[i], oscillationSine[i])
distance = self.calculateDistanceBetweenTwoPoints(
centroid[0], centroid[1], sinusoidePoint[0],
sinusoidePoint[1])
distances.append(distance)
print("Distance : ")
print(distance)
scale = random.uniform(1.1, 1.4)
list_size = len(contours_list)
last_contour = contours_list[list_size - 1]
scaled_contour = None
print("value: " + str(value))
print("maxValue: " + str(maxValue))
if value > maxValue:
print("crece")
new_contour = self.scaleContour(last_contour.contour,
scale)
scaled_contour = Contour(new_contour, self.blueColor,
"increace")
else:
if value < maxValue:
print("decrece")
new_contour = self.scaleContour(
last_contour.contour, scale, 1)
scaled_contour = Contour(new_contour, self.pinkColor,
"decreace")
else:
print("Se mantiene ")
if scaled_contour != None:
contours_list.append(scaled_contour)
maxValue = value
plt.plot(distances)
#plt.scatter(times, oscillationSine)
plt.show()
#self.linearRegression(times,distances)
return self.generatePolygons(contours_list)
class PointObject(IPyNotebookStyles):
""" Handles super-resolution data and allows the outline (shaoe) finding """
def __init__(self):
super(PointObject, self).__init__()
self.name = None
self.dataFrame = None
self.data = None
self.images = None
self.originalDataFrame = None
self.nrOfFrames = None
self.movieMade = False
self.runCluster = False
self.edgePoints = True
self.ROIedges = None
self.cluster = None
self.contour = None
self.backbone = None
self.curvature = None
def loadFile(self, fname, dataType='rapdistorm'):
"""
Load a localisation file into PointObject.
Currently supported input formats are rapidstorm and xyt. For xyt data
has to be tab separated file with one header line containing 'x, 'y', 'frame'
as labels for the columns. Additional columns may be present which will
be ignored.
Input:
frame (str): File that should be loaded into PointObject
dataType (str): Data type of the input file. Possible values are
'rapidstorm' and 'xyt'.
"""
if not isinstance(fname, DataFrame):
self.name = fname # set the name of the object
if dataType == 'rapdistorm':
data = rapidstormLocalisations()
elif dataType == 'xyt':
data = XYTLocalisations()
data.readFile(fname)
self.dataFrame = data.data # we only need the DataFrame
else:
self.dataFrame = fname # you can also handover the DataFrame directly
# Add the movieFrame column
self.dataFrame['movieFrame'] = 1
# Make a backup of the original data without ROI information
self.originalDataFrame = deepcopy(self.dataFrame)
# Convert the DataFrame to the Dictionary lookup
self.data = self._convertDataFrameToDict()
# Save the number of frames
self.nrOfFrames = len(self.data)
def save(self, folderName=None):
warnings.warn("save() is deprecated. Please use export() instead.",
DeprecationWarning)
self.export(folderName)
def export(self, folderName=None):
"""
Save the extracted structure (i.e. clusters), contour lines, and
curvature values to a text file.
Export the caluculated data to a folder. For each step of the calculation
a single file will be created containing the frame number and the relevant
values. See the header for more information.
The output files will be named based on the input data file name if no
folderName is given. The input file name will be appended by
"_clusterData.dat", "_contourData.dat", and "_curvatureData.dat" respectively.
Input:
folderName (str, None): Export data into this folder (will be created if
it does not exist. Existing files will be overwritten!)
"""
# Use the input folder if not specified otherwise
if folderName is None:
folderName, _ = os.path.split(self.name)
# Check if the folder exists, and if not ask if it should be created
if not os.path.isdir(folderName):
print("The specified folder doe not exist")
answer = input("Create folder %s ? (y/n)" % folderName)
if answer.lower() == 'y' or answer.lower() == 'yes':
os.mkdir(folderName)
else:
print("Not saving the data.")
return
# Get the results
try:
clusterData = self.cluster.getResult()
except AttributeError:
clusterData = None
print("Clustering data not present. Not saving cluster data.")
try:
contourData = self.contour.getResult(smoothed=True)
except AttributeError:
contourData = None
print("Contour data not present. Not saving contour data.")
try:
curvatureData = self.curvature.getResult()
curvatureDataSelected = self.curvature.contourSelected
except AttributeError:
curvatureData = None
print("Curvature data not present. Not saving curvature data.")
# Get the name of the object
_, objectName = os.path.split(self.name)
# Define open the file hooks
if clusterData is not None:
clusterFile = open(
os.path.join(folderName, '%s_clusterData.dat' % objectName),
'w')
clusterFile.write('x_in_nm\ty_in_nm\tframe\n')
if contourData is not None:
contourFile = open(
os.path.join(folderName, '%s_contourData.dat' % objectName),
'w')
contourFile.write('x_in_nm\ty_in_nm\tframe\n')
if curvatureData is not None:
curvatureFile = open(
os.path.join(folderName, '%s_curvatureData.dat' % objectName),
'w')
curvatureFileSelected = open(
os.path.join(folderName,
'%s_curvatureDataSelected.dat' % objectName), 'w')
curvatureFile.write(
'x_in_nm\ty_in_nm\tcurvature_in_(1/nm)\tframe\n')
curvatureFileSelected.write(
'x_in_nm\ty_in_nm\tcurvature_in_(1/nm)\tside\tframe\n')
# Save the data
for frame in range(1, (self.nrOfFrames + 1)):
# Save the cluster data
if clusterData is not None:
XY = clusterData[frame]
for row in range(np.shape(XY)[0]):
clusterFile.write("%.3f\t%.3f\t%d\n" %
(XY[row, 0], XY[row, 1], frame))
# Save the contour data
if contourData is not None:
contourPaths = contourData[frame]
for path in contourPaths:
XY = path.vertices
for row in range(np.shape(XY)[0]):
contourFile.write("%.3f\t%.3f\t%d\n" %
(XY[row, 0], XY[row, 1], frame))
# Save the curvature data
if curvatureData is not None:
# Write the full curvature data
for contourPath, curvature in curvatureData[frame]:
XY = contourPath.vertices
for row, value in enumerate(curvature):
curvatureFile.write(
"%.3f\t%.3f\t%.6f\t%d\n" %
(XY[row, 0], XY[row, 1], value, frame))
# Write the selected region only
for side, (contourPath, curvature, _, _,
_) in curvatureDataSelected[frame]:
XY = contourPath.vertices
for row, value in enumerate(curvature):
curvatureFileSelected.write(
"%.3f\t%.3f\t%.6f\t%d\t%d\n" %
(XY[row, 0], XY[row, 1], value, side, frame))
print("Saving data to %s done." % folderName)
return
def clusterData(self,
eps,
min_samples,
frame=None,
clusterSizeFiler=50,
askUser=True):
"""
Run DBSCAN to identify the objects of interest and supress noise.
The density based clustering algorithm DBSCAN is used to cluster the
point localisations within each movie frame. The user is then asked to
select the clusters that correspond to the object of interest (multiple
selections are allowed) and the selection will be kept and used for
future calculations.
Each movie frame will be run on one CPU core thus making use of multi-core
systems. The user can restrict the frames that should be computed to
optimse the clustering parameters.
Input:
eps (float): The eps parameter of the sklearn DBSCAN implementation
min_samples (int): The min_samples parameter of the sklearn DBSCAN implementation
For more details on the implementation see: http://scikit-learn.org/stable/modules/generated/sklearn.cluster.DBSCAN.html
frame (int,None): If not None specifies the frame that should used
clusterSizeFiler (int): Display filter for small clusters. CLusters
below the specified size will not be displayed
askUser (bool): Whether or not prompt the user to select the clusters
"""
self.cluster = Cluster() # initialise the cluster object
self.cluster.setData(self.dataFrame)
self.cluster.cluster(eps, min_samples, frame, clusterSizeFiler,
askUser) # run DBSCAN
self.runCluster = True # set the cluster flag so that subsequent calls now it was run
def resetImage(self):
"""
Reset the contour finding routine.
"""
self.contour = None
return
def calculateKDE(self, kernel='gaussian', bandwidth=None):
"""
Calculate the Kernel Density Estimation.
This will generate a high-resolution "image" of the localisations
based on the kernel density estimate of the point localisations.
If no bandwidth is specified an optimal bandwidth parameter is estimated
using cross-validation. This is the default behaviour.
Input:
kernel (str): Kernel to be used for the kernel density estimation
Possible values are 'gaussian' (default) and 'tophat'
bandwidth (float,None): The bandwidth for the kernel density estimation
If set to None cross-validation will be used
to find the optimal parameter.
"""
if not self.runCluster:
print('You need to run the clustering first!')
return
if self.contour is not None:
print("It seems as if you already set up a pixel image.")
print("Use resetImage() and try again")
return
self.contour = Contour()
self.contour.setData(self.cluster.getResult(self.edgePoints))
self.contour.kernelDensityEstimate(kernel=kernel, bandwidth=bandwidth)
def loadPixelImage(self,
fname,
pixelSize=1.0,
start=None,
end=None,
padding=[20, 20]):
"""
Load a pixel image into the pipeline.
Instead of generating a super-resolved image from point localisation
data the pipeline can load any pixel image instead. The consecutive
steps of contour fitting and curvature calculation can then be used
on this input.
Input:
fname (str): Image file to load
pixelSize (float): Set the pixel size in nm
start (int): The first frame to load
end (int): The last frame to include
padding (list): Must be a list of two int specifying the width
in pixels of the dark region that will be added
to the images at the outside edges. This is done
to allow the constricting contour fitting to fully
close on objects even if they are extending out
of the frame.
"""
if self.contour is not None:
print("It seems as if you already set up a pixel image.")
print("Use resetImage() and try again")
return
# Set the name of the object
self.name = fname
# Load the image file using tifffile.py
tmpImage = Tiff.TiffFile(fname)
self.images = [tmpImage[i].asarray() for i in range(len(tmpImage))]
self.images = self.RGBtoGreyscale(self.images)
# Select the frame range
if start is None:
start = 1
if end is None:
end = len(self.images)
self.images = self.images[start - 1:end]
# Save the number of frames
self.nrOfFrames = len(self.images)
# Add some dark pixel paddings around the image. This makes contour
# detection easier if the object is extending out of the image border.
if padding:
xpad, ypad = padding
newImages = list()
for image in self.images:
# Create arrays containing zeros
zerosX = np.zeros([np.shape(image)[0], xpad])
zerosY = np.zeros([ypad, np.shape(image)[1] + 2 * xpad])
# Add them to the original image
newImage = np.concatenate([zerosX, image, zerosX], axis=1)
newImage = np.concatenate([zerosY, newImage, zerosY], axis=0)
# Add the padded image to the list
newImages.append(newImage)
# Replace the original images with the padded ones.
self.images = newImages
# Initialise the Contour class and set the images
self.contour = Contour()
self.contour.images = self.images
self.contour.pixelSize = [float(pixelSize), 0.0, float(pixelSize), 0.0]
print("Finished loading %d frames from %s" % (len(self.images), fname))
return
def RGBtoGreyscale(self, images):
"""
Convert RGB images to greyscale
The SIM images seem to be returned as RGB TIFF images containing three
channels containing each the same information. The pipeline expects
greyscale images. If images of the described are detected they are
converted to simple greyscale images.
Input:
images (list): List containing np.arrays holding the image data
"""
assert (isinstance(images, list))
if len(np.shape(images[0])) == 4: # i.e. RGB
# Assert that all color channels are actually the same
assert (np.all(images[0][:, :, :, 0] == images[0][:, :, :, 1]))
assert (np.all(images[0][:, :, :, 0] == images[0][:, :, :, 2]))
images = [item[:, :, :, 0] for item in images]
if len(images) == 1:
images = [
images[0][frame, :, :]
for frame in range(np.shape(images[0])[0])
]
return images
def calculateContour(self, iterations=1500, smoothing=2, lambda1=1, \
lambda2=1, startPoints="min"):
"""
Find the contour of a super-resolved pixel image.
The contour is fitted using a morphological contour fitting algorithm
(https://github.com/pmneila/morphsnakes).
The contour fitting is controlled using three parameters, i.e. smoothing,
lamda1, and lambda2. Here the description given in the original source code
smoothing : scalar
The number of repetitions of the smoothing step (the
curv operator) in each iteration. In other terms,
this is the strength of the smoothing. This is the
parameter µ.
lambda1, lambda2 : scalars
Relative importance of the inside pixels (lambda1)
against the outside pixels (lambda2).
Furthermore the parameter iterations is used to select the number of
iterations the contour fitting should run. If it did not converge yet,
further steps might be excecuted by calling contour.advanceContourMorph()
Input:
iterations (int): Number of steps the morphological contour fitting
algorithm should advance.
smoothing (scalar): See above
lambda1 (scalar): See above
lambda2 (scalar): See above
startPoints (list or str) This determines the seed point for the
contour fitting algorithm, i.e. the starting
point. Can be either "max" or "min" and
one correspdoning pixel is choses based
of the condition. If individual frames
require different starting points this
can be specified using a list. Each element
in the list will then be taken for the
corresponding frame. E.g. ["max","max,"min"]
would take the "max" for frame 1 and 2 and
"min" for frame 3.
"""
if self.contour is None:
print("The image is not yet set yet.")
return
self.contour.findContourMorph(iterations=iterations ,\
smoothing=smoothing ,\
lambda1=lambda1 ,\
lambda2=lambda2 ,\
startPoints=startPoints
)
self.contour.selectContour()
def calculateCurvature(self,
smooth=True,
window=2,
smoothedContour=False,
percentiles=[99, 1]):
"""
Calculate the curvature based on the expression for local curvature
( see https://en.wikipedia.org/wiki/Curvature#Local_expressions )
Input:
smooth (bool): Smooth the curvature data using the gaussian weighted
rolling window approach.
window (float): Sigma of the gaussian (The three sigma range of the
gaussian will be used for the averaging with each
localisation weighted according to the value of
the gaussian).
smoothedContour (boolean): Use the smoothed contour for the calculation?
Default is False.
isclosed (boolean): REMOVED
Each contour is checked if it closed, i.e. start
and end point fall close in space and treated
accordingly. For open contours the endings are
ignored to avoid bias from the edges.
Treat the contour as closed path. Default is True
and should always be the case if padding was added
to the image when loading image files or when the
FOV was sufficiently large when loading point
localisation data. Note that there might be unexpected
if the contour is not closed.
percentiles (list): Must be a list of two floats. Specifies the max and
min values for displaying the curvature on a color
scale. This can be important if unnatural kinks are
observed which would dominate the curvature to an
extent that the color scale would be skewed.
By setting the percentiles one can set the range
in a "smart" way.
"""
if self.contour is None:
print('You need to run the contour selection first!')
return
self.curvature = Curvature()
self.curvature.setData(
self.contour.getResult(smoothed=smoothedContour))
self.curvature.calculateCurvature(smooth=smooth,
window=window,
percentiles=percentiles)
def skeletonize(self, thres, binSize=10.0, sigma=5.0):
"""
Initialise the backbone finding routine. The "backbone" is approximated
by using a skeletonization algorithm. It will thus find a backbone with
with branches.
To find the skeleton, the localisations are binned in a 2D histogram,
blurred by a gaussian and the resulting image is binarized using the
threshold value. From the binary images pixel at the edges are taken
away until only the skeleton remains.
"""
if not self.runCluster:
print('You need to run the clustering first!')
return
self.backbone = Skeleton()
self.backbone.setData(self.cluster.getResult())
self.backbone.threshold(thres, binSize=binSize, sigma=sigma)
def initShape(self):
shape = Shape()
shape.setData(self.contour.getResult(), self.backbone.getResult(),
self.cluster.getResult())
shape.show()
def makeMovie(self, nrFrames=2000, stepSize=500):
"""
Bin the localisations into frames. Sampling density can be controlled
by selecting the number of frames that should be grouped.
Imaging live objects implies that the object moves and changes during
acquisiton time. By selecting a time gap (i.e. nrFrames) in which the
object can be assumed to be static, a snapshot at this "time point" can
be generated and a super-resolution image can be created. To increase
the temporal "resolution" stepSize can be specified which is the gap
between the first frames of consecutive movie frames. If the stepSize
is smaller than nrFrames there will consequently an overlap of data
between consecutive points. This will however, effectivly increase the
frames/sec of the movie that will be produced and will increase the
chance of resolving the event of interest.
Here a brief schematic of the movie frame generation:
-------------------------------------------- (frames)
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | (movie frames without overlap)
| | | | | | | | | | | (additional movie frames due to overlap)
Input:
nrFrames How long should one movie frame be, i.e. number
of original TIFF frames
stepSize Gap between to frames, if stepSize < nrFrames
there will be overlap
"""
assert (self.dataFrame is not None)
startTime = datetime.now() # set the calculation start time
movie = LocalisationsToMovie(self.dataFrame)
self.dataFrame = movie.create(nrFrames, stepSize)
self.movieMade = True
# Make a backup of the original data without ROI information
self.originalDataFrame = deepcopy(self.dataFrame)
# We're done, print some interesting messages
time = datetime.now() - startTime
print("Finished making the movie in:", str(time)[:-7])
print("Generated {:.0f} frames".format(
self.dataFrame['movieFrame'].max()))
def movieFrames(self):
""" Iterate over the localisation data in the movie frames. """
assert (self.movieMade)
for name, group in self.data.groupby('movieFrame'):
yield name, group
def getFrame(self, frame):
""" Return the localisations in the given frame. """
return self.data.groupby('movieFrame').get_group(frame)
def saveMovie(self,
fname,
plotContour=True,
plotCurvature=True,
lw=10,
alpha=0.8):
"""
Create an .mp4 file showing the progression of the PointObject.
Requires the ffmpeg binaries to work. It will create a movie file showing
the frame-by-frame result as a movie.
Input:
fname (str): The filename of the movie
plotContour (bool): Plot the contour
plotCurvature (bool): Color code the contour line based on the local
curvature.
lw (int): Width of the contour line
alpha (float): Transparency of the contour line
"""
if self.data is None or not self.movieMade:
print('You need to load data and make a movie first')
return
if self.contour is None:
print(
'You need to run the KDE estimate first and generate the "image"'
)
return
try:
movieData = self.contour.kdfEstimate
assert (movieData is not None)
except:
print(
"It looks as if something went wrong with getting the KDE image."
)
print("Did you run the kernel density estimation already?")
return
try:
movieContour = self.contour.getResult()
except:
movieContour = None
try:
movieCurvature = self.curvature.getResult()
except:
movieCurvature = None
if not plotCurvature:
movieCurvature = None
m = MovieGenerator(movieData,
movieContour,
movieCurvature,
plotContour=plotContour,
lw=lw,
alpha=alpha)
m.make(fname)
def setFOV(self, frame=1, convert=True):
"""
Depreceated. Please use setROI() instead!
Only kept for backwards compatibility
"""
warnings.warn("Depreceated. Please use setROI() instead!",
DeprecationWarning)
self.setROI(frame=frame, convert=convert)
def setROI(self, frame=1, convert=True):
"""
Use one frame to set a ROI for further analysis.
Note: Cannot be used with %pylab inline
Input:
frame (int): Frame number that will be used to select the ROI
convert (bool): Do set the selected ROI as new data
"""
# Check if switched to qt mode
if not mpl.get_backend() == 'Qt4Agg':
print('Switch to the Qt backend first by executing "%pylab qt"')
return False
# Reset any prior ROI selection
self.dataFrame = self.originalDataFrame
# Select first frame
frameData = self.dataFrame[self.dataFrame['movieFrame'] == frame]
XY = np.asarray(frameData[['x', 'y']])
fig = plt.figure(figsize=self.singleFigure)
ax = fig.add_subplot(111)
ax.set_title("Frame %d" % frame)
ax.set_xlabel("x position in nm", size=self.axesLabelSize)
ax.set_ylabel("y position in nm", size=self.axesLabelSize)
ax.set_xlim([np.min(XY[:, 0]), np.max(XY[:, 0])])
ax.set_ylim([np.min(XY[:, 1]), np.max(XY[:, 1])])
ax.scatter(x=XY[:, 0],
y=XY[:, 1],
edgecolor='none',
facecolor='blue',
s=2)
rect = RoiSelector(ax)
self.ROIedges = rect.edges # These will always be x1,y1,x2,y2 with x1,y2 bottom left, x2,y2 top right
# The ROI was drawn, let the user look at it for a second and then go on
sleep(1)
plt.close(fig)
# Select the ROI
self._selectFOVdata()
if convert:
self.data = self._convertDataFrameToDict()
def _selectFOVdata(self):
if self.ROIedges is None:
print('No ROI selected yet. Run setROI() first')
return
# Filter the data
xbl, ybl, xtr, ytr = self.ROIedges
self.dataFrame = self.dataFrame[self.dataFrame.x >= xbl]
self.dataFrame = self.dataFrame[self.dataFrame.x <= xtr]
self.dataFrame = self.dataFrame[self.dataFrame.y >= ybl]
self.dataFrame = self.dataFrame[self.dataFrame.y <= ytr]
def _convertDataFrameToDict(self):
data = dict()
if self.movieMade:
for movieFrame in set(self.dataFrame.movieFrame):
XY = np.asarray(
self.dataFrame[self.dataFrame.movieFrame == movieFrame][[
'x', 'y'
]])
data[movieFrame] = [movieFrame, XY, None]
else:
XY = np.asarray(self.dataFrame[['x', 'y']])
data[1] = [1, XY, None]
return data
def test_rotation(self):
cseg = Contour([1, 4, 9, 9, 2, 1])
self.assertEqual(cseg.rotation(), Contour([4, 9, 9, 2, 1, 1]))
self.assertEqual(cseg.rotation(1), Contour([4, 9, 9, 2, 1, 1]))
self.assertEqual(cseg.rotation(2), Contour([9, 9, 2, 1, 1, 4]))
self.assertEqual(cseg.rotation(20), Contour([9, 9, 2, 1, 1, 4]))
def classFactory(iface):
from contour import Contour
return Contour(iface)
def test_retrogression(self):
cseg = Contour([1, 4, 9, 9, 2, 1])
self.assertEqual(cseg.retrogression(), Contour([1, 2, 9, 9, 4, 1]))
class SubScene(QtWidgets.QGraphicsScene):
def __init__(self, parent=None, dist = distance, eps=30, modes = [0,1,2]):
super().__init__(parent)
self.mode = modes[0]
self.modes = modes
self.QGitem=None
self.line = None
self.polys = []
self.dist_func = dist
self.eps = eps
self.polyFinished = False
self.selectedContour = None
self.selectedVertex=None
self.overrideCursor(QtCore.Qt.ArrowCursor)
def setDrawing(self):
self.mode = self.modes[1]
def setEdit(self):
self.mode = self.modes[2]
def setMovement(self):
self.mode = self.modes[0]
def updatePolyPoint(self, poly, pos):
poly.setPos(pos)
poly.addPoint(pos)
def clearContours(self):
if self.selectedContour:
self.selectedContour.highlightClear()
self.selectedContour = None
self.forceClearContours()
self.update()
def forceClearContours(self):
for contour in self.items()[:-1]:
contour.highlightClear()
self.update()
def returnPoints(self):
if self.QGitem is not None:
pts = self.QGitem.points
elif len(self.polys) > 0:
pts = self.polys[0].points
else:
return None
return [[p.x(), p.y()] for p in pts]
def addAIPolygon(self, points):
qPoints = [QtCore.QPoint(x,y) for x,y in points]#
if len(self.polys) ==0:
if self.QGitem is None:
self.QGitem = Contour(point_size=1.5)
self.addItem(self.QGitem)
self.updatePolyPoint(self.QGitem, qPoints[0])
self.QGitem.setZValue(len(self.polys) + 1)
self.QGitem.prepareGeometryChange()
self.QGitem.points = qPoints
self.QGitem.addPoint((qPoints[0]))
else:
self.QGitem = self.polys[0]
self.QGitem.prepareGeometryChange()
self.QGitem.points = qPoints
self.QGitem.addPoint((qPoints[0]))
self.finalisePolygon()
self.update()
def mouseReleaseEvent(self, event):
if self.mode == self.modes[0]:
self.overrideCursor(QtCore.Qt.ArrowCursor)
self.update()
def isClose(self, p1, p2):
return self.dist_func(p1-p2) <self.eps
def finalisePolygon(self, premature=False):
if self.QGitem:
# if premature: something to do but will add later
if self.line:
self.removeItem(self.line)
self.line.popPoint()
self.QGitem.editable=False
self.polys.append(self.QGitem)
self.QGitem = None
self.mode = self.modes[0]
self.update()
def selectContour(self, contour):
contour.selected=True
self.selectedContour = contour
self.update()
def selectShapeByPoint(self, pos):
if self.vertexSelected():
self.selectedContour.highlightVertex(self.selectedVertex)
return
itemundermouse = self.itemAt(pos, QtGui.QTransform())
if itemundermouse in self.items()[:-1]:
self.selectContour(itemundermouse)
return
def moveVertex(self, pos):
self.selectedContour.prepareGeometryChange()
self.selectedContour.moveBy(self.selectedVertex, pos - self.selectedContour[self.selectedVertex])
def vertexSelected(self):
return self.selectedVertex is not None
def ptDist(self, pt1, pt2):
# A line between both
line = QtCore.QLineF(pt1, pt2)
# Length
lineLength = line.length()
return lineLength
def getClosestPoint(self, pt):
closest = (-1, -1)
distTh = 4.0
dist = 1e9 # should be enough
item_under_mouse = self.itemAt(pt, QtGui.QTransform())
for i in range(self.selectedContour.size()):
pt1 = self.selectedContour.points[i]
j = i+1
if j == self.selectedContour.size():
j=0
pt2 = self.selectedContour.points[j]
edge = QtCore.QLineF(pt1, pt2)
normal = edge.normalVector()
normalTrhoughPos = QtCore.QLineF(pt.x(), pt.y(), pt.x()+(normal.dx()*10), pt.y()+(normal.dy()*10))
normalTrhoughPos2 = QtCore.QLineF(pt.x(), pt.y(), pt.x() - (normal.dx() * 10), pt.y() - (normal.dy() * 10))
for norm in [normalTrhoughPos, normalTrhoughPos2]:
# if item_under_mouse in self.items()[:-1]:
# normalTrhoughPos = QtCore.QLineF(pt.x(), pt.y(), pt.x()-(normal.dx()*10), pt.y()-(normal.dy()*10))
intersectionPt = QtCore.QPointF()
intersectionType = edge.intersect(
norm, intersectionPt)
currDist = self.ptDist(intersectionPt, pt)
if intersectionType ==QtCore.QLineF.BoundedIntersection:
currDist = self.ptDist(intersectionPt, pt)
if currDist < dist:
closest = (i,j)
dist = currDist
return closest
def reset(self):
self.clearContours()
self.forceClearContours()
if self.line:
self.removeItem(self.line)
self.line=None
if self.QGitem:
self.removeItem(self.QGitem)
self.QGitem = None
for polys in self.polys:
self.removeItem(polys)
self.polys = []
self.mode = self.modes[0]
self.update()
def mousePressEvent(self, event):
pos = event.scenePos()
if event.button() == QtCore.Qt.LeftButton and self.mode == self.modes[1]:
self.overrideCursor(QtCore.Qt.CrossCursor)
if self.line is None or self.polyFinished:
self.line = Contour(point_size=1.5)
self.addItem(self.line)
self.updatePolyPoint(self.line, pos)
elif self.line and not self.polyFinished:
self.line.prepareGeometryChange()
self.line.points[0] = pos
self.line.setPos(pos)
if self.QGitem:
self.QGitem.prepareGeometryChange()
if len(self.QGitem.points) >1 and self.isClose(pos, self.QGitem.points[0]):
self.overrideCursor(QtCore.Qt.PointingHandCursor)
pos = self.QGitem.points[0]
self.QGitem.highlightVertex(0)
#need to add to close the polygone
self.QGitem.addPoint(pos)
if self.QGitem.points[0] == pos:
self.finalisePolygon()
else:
self.QGitem = Contour(point_size=1.5)
self.addItem(self.QGitem)
self.updatePolyPoint(self.QGitem, pos)
self.QGitem.setZValue(len(self.polys)+1)
event.accept()
self.update()
if event.button() == QtCore.Qt.RightButton and self.mode == self.modes[1]:
self.overrideCursor(QtCore.Qt.CrossCursor)
if self.line:
if len(self.line.points) > 1 and self.QGitem:
self.QGitem.prepareGeometryChange()
self.QGitem.remove(-1)
if self.QGitem.points==1:
self.removeItem(self.QGitem)
self.removeItem(self.line)
self.line=None
return
self.line.prepareGeometryChange()
self.line.points[0] =self.QGitem.points[-1]
event.accept()
self.update()
if self.mode == self.modes[2] and event.button() == QtCore.Qt.LeftButton:
self.overrideCursor(QtCore.Qt.ClosedHandCursor)
self.selectShapeByPoint(pos)
event.accept()
self.update()
if self.mode == self.modes[2] and event.button() == QtCore.Qt.MiddleButton:
self.overrideCursor(QtCore.Qt.CrossCursor)
if len(self.polys) > 0:
self.selectedContour = self.polys[0]
pts = self.getClosestPoint(pos)
self.selectedContour.points.insert(pts[1], pos)
if self.vertexSelected() and event.button() == QtCore.Qt.RightButton and self.mode == self.modes[2]:
self.overrideCursor(QtCore.Qt.PointingHandCursor)
self.selectedContour.prepareGeometryChange()
self.selectedContour.remove(self.selectedVertex)
if len(self.selectedContour.points) ==1:
self.removeItem(self.selectedContour)
self.update()
def overrideCursor(self, cursor):
QtWidgets.QApplication.setOverrideCursor(cursor)
def mouseMoveEvent(self, event):
pos = event.scenePos()
if self.mode == self.modes[1]:
self.overrideCursor(QtCore.Qt.CrossCursor)
if self.QGitem:
if len(self.QGitem.points)==1: #intilaise line to the pooint
self.line.points = [self.QGitem.points[0],self.QGitem.points[0] ]
colorLine = QtGui.QColor(3,252,66)
if len(self.QGitem.points) >1 and self.isClose(pos, self.QGitem.points[0]):
self.overrideCursor(QtCore.Qt.PointingHandCursor)
colorLine = self.QGitem.line_color
pos = self.QGitem[0]
self.QGitem.highlightVertex(0)
if len(self.line.points)==2:
self.line.points[1] = pos
else:
self.line.addPoint = pos
self.line.line_color = colorLine
return
if self.mode == self.modes[2] and QtCore.Qt.LeftButton & event.buttons():
if self.vertexSelected():
self.overrideCursor(QtCore.Qt.ClosedHandCursor)
self.selectedContour.prepareGeometryChange()
self.moveVertex(pos)
self.update()
return
elif self.mode == self.modes[2]:
self.overrideCursor(QtCore.Qt.OpenHandCursor)
id_point = [[i for i, y in enumerate(poly.points) if distance(pos - y) <= self.eps] for poly in self.polys]
id_shape = [i for i, y in enumerate(id_point) if y != []]
item_under_mouse = self.itemAt(pos, QtGui.QTransform())
self.clearContours()
if id_shape!=[]:
self.selectedVertex = id_point[id_shape[0]][0]
self.selectContour(self.items()[:-1][::-1][id_shape[0]])
self.selectedContour.highlightVertex(self.selectedVertex)
elif item_under_mouse in self.items()[:-1]:
self.selectedVertex=None
self.selectContour(item_under_mouse)
self.selectedContour.hIndex=None
else:
self.selectedVertex = None
self.update()
def test_inversion(self):
cseg = Contour([1, 4, 9, 9, 2, 1])
self.assertEqual(cseg.inversion(), Contour([8, 5, 0, 0, 7, 8]))
def addScene(self, scene):
logging.debug("In MultiSliceContour::addScene()")
contour = Contour(scene)
self._replyList.append(contour)
for rContour in self._replyList:
rContour.replyList.append(contour)
replyList = self._replyList[:]
replyList.append(self)
contour.replyList = replyList
points = []
i = 0
while i < self._representation.GetNumberOfNodes():
addPosition = [0,0,0]
self._representation.GetNthNodeWorldPosition(i, addPosition)
if self.pointMap.has_key((addPosition[0], addPosition[1], addPosition[2])):
addPosition = self._pointMap[(addPosition[0], addPosition[1], addPosition[2])]
else:
addPosition = self._scene.toOriginalView(addPosition)
points.append(addPosition)
i = i + 1
contour.loadPoints(points)
contour.lineColor = self.lineColor
contour.visible = self.visible
if self.locked:
contour.lock()
else:
contour.unlock()
contour.radius = self.getRadius()
def test_translation(self):
cseg = Contour([1, 4, 9, 9, 2, 1])
self.assertEqual(cseg.translation(), Contour([0, 2, 3, 3, 1, 0]))
#Configuring the camera to look the way we want
config_microsoft_cam()
#init_UDP_client()
#init_network_tables()
M_HFOV = find_fov(M_HA, M_VA, M_DFOV)
#print(M_HFOV)
pipeline = GripPipeline()
vision_math = Math()
#Video Capture stuff
cam = cv2.VideoCapture(0)
#Set Camera resoultion
cam.set(3, HRES)
cam.set(4, VRES)
cnt1 = Contour()
cnt2 = Contour()
count = 0
t_end = time.time() + 10
while time.time() <= t_end:
count = count + 1
captureStartTime = cv2.getTickCount()
s, im = cam.read() # captures image
captureEndTime = cv2.getTickCount()
captureTime = (captureEndTime - captureStartTime) / cv2.getTickFrequency()
cv2.imshow("Test Picture", im) # displays captured image
processStartTime = cv2.getTickCount()
pipeline.process(im)
processEndTime = cv2.getTickCount()
processTime = (processEndTime - processStartTime) / cv2.getTickFrequency()
find_target(cnt1, cnt2)
def test_prime_form_marvin_laprade(self):
cseg1 = Contour([1, 4, 9, 2])
cseg2 = Contour([5, 7, 9, 1])
cseg3 = Contour([5, 7, 9, 1])
cseg4 = Contour([0, 2, 1, 3, 4])
cseg5 = Contour([0, 1, 2, 3, 2])
cseg6 = Contour([1, 2, 3, 0, 3, 1])
cseg7 = Contour([0, 1, 2, 1, 2])
self.assertEqual(cseg1.prime_form_marvin_laprade(), Contour([0, 2, 3, 1]))
self.assertEqual(cseg2.prime_form_marvin_laprade(), Contour([0, 3, 2, 1]))
self.assertEqual(cseg3.prime_form_marvin_laprade(), Contour([0, 3, 2, 1]))
self.assertEqual(cseg4.prime_form_marvin_laprade(), Contour([0, 2, 1, 3, 4]))
self.assertEqual(cseg5.prime_form_marvin_laprade(), [Contour([0, 1, 2, 4, 3]), Contour([0, 1, 3, 4, 2])])
## FIXME: wrong test
# self.assertEqual(cseg6.prime_form_marvin_laprade(), [Contour([1, 3, 4, 0, 5, 2]), Contour([1, 4, 0, 5, 3, 2])])
self.assertEqual(cseg7.prime_form_marvin_laprade(), [Contour([0, 1, 3, 2, 4]), Contour([0, 2, 4, 1, 3])])
pymclevel_log.setLevel(logging.CRITICAL)
print
print "Finished shifting, shifted: %d chunks" % shifted
# Attempt to merge new chunks with old chunks
elif mode == Modes.merge:
contour_data_file = os.path.join(cli.world_dir, cli.contour_file_name)
if 'gauss' in (ChunkShaper.filt_name_river, ChunkShaper.filt_name_even):
if not hasattr(filter, 'scipy'):
print "You must install SciPy to use the '%s' filter" % 'gauss'
sys.exit(1)
print "Getting saved world contour..."
contour = Contour()
try:
contour.read(contour_data_file)
except (EnvironmentError, ContourLoadError), e:
if e.errno == errno.ENOENT:
if os.path.exists(cli.world_dir):
error("no contour data to merge with (use trace mode to generate)")
else:
error('could not read world data: File not found: %s' % cli.world_dir)
else:
error('could not read contour data: %s' % e)
def save_contour():
try:
if contour.empty:
os.remove(contour_data_file)
def computeSimpleFlow(self, i):
print("computeSimpleFlow", i, " ", int(100 * i / len(self.frames)),
"%")
frame = self.frames[i]
#plt.imshow(frame[:, :, ::-1])
#plt.show()
"""
FD = np.zeros(self.shape)
for px in range(self.shape[0]):
for py in range(self.shape[1]):
FD[px, py] = self.mask.getDensity(frame[px, py])
plt.figure(figsize = (10, 5))
plt.subplot(121)
plt.imshow(FD, cmap = "gray")
plt.subplot(122)
plt.imshow(FD > 0, cmap = "gray")
plt.show()
"""
"""
while(nchanges > 0 and nite < 10):
nadded, nremoved = 0, 0
newpoints = self.currentcontour.get("points").copy()
normals = self.currentcontour.get("normals").copy()
for i in range(len(newpoints)):
dc = self.mask.getDensity(frame[newpoints[i][0], newpoints[i][1]]) - self.mask.lambd
if(dc < 0):
newpoints[i] = self.currentcontour.getPixelToNormal(newpoints[i], - normals[i]).copy()
nremoved += 1
else:
p_n = self.currentcontour.getPixelToNormal(newpoints[i], normals[i]).copy()
dc_p_n = self.mask.getDensity(frame[p_n[0], p_n[1]]) - self.mask.lambd
if(dc_p_n > 0):
newpoints[i] = p_n.copy()
nadded += 1
self.currentcontour = Contour(newpoints, self.shape)
nite += 1
nchanges = nadded + nremoved
print(nite, nadded, nremoved, len(self.currentcontour.get("points")))
#if(PARAMS["verbose"]):self.currentcontour.render()
#if(PARAMS["verbose"]):self.currentcontour.render()
"""
def getPiDC(pi, ni, nax):
DC = np.zeros(2 * nax + 1)
Pi = np.zeros((2 * nax + 1, 2))
DC[nax] = np.sign(
self.mask.getDensity(frame[pi[0], pi[1]]) - self.mask.lambd)
Pi[nax] += pi
for j in range(1, nax + 1):
temppi = self.currentcontour.getPixelToNormal(
Pi[nax + j - 1], ni).copy().astype(int)
Pi[nax + j] = temppi.copy()
tempdc = self.mask.getDensity(
frame[temppi[0] % self.shape[0],
temppi[1] % self.shape[1]]) - self.mask.lambd
DC[nax + j] += np.sign(tempdc)
temppi = self.currentcontour.getPixelToNormal(
Pi[nax - j + 1], -ni).copy().astype(int)
Pi[nax - j] = temppi.copy()
tempdc = self.mask.getDensity(
frame[temppi[0] % self.shape[0],
temppi[1] % self.shape[1]]) - self.mask.lambd
DC[nax - j] += np.sign(tempdc)
return Pi, DC
points = self.currentcontour.get("points").copy()
normals = self.currentcontour.get("normals").copy()
print(len(points))
findeps = []
#findepm1 = 0
changepoints = []
#for i in range(len(newpoints)):
nbloc = 10
nax = 10
nnewpoints = max(10, int(0.05 * len(points)))
for i in np.linspace(0, len(points), nnewpoints + 1).astype(int)[:-1]:
findepii = []
for ii in range(-nbloc, nbloc + 1):
pi = points[(i + ii) % len(points)].copy()
ni = normals[(i + ii) % len(normals)].copy()
Pi, DC = getPiDC(pi, ni, nax)
if (ii == 0):
Pi0 = Pi.copy()
dep = []
for j in range(nax):
if (DC[j] < 0 and DC[j + 1] > 0):
dep += [j + 1]
for j in range(1, nax + 1):
if (DC[nax + j] < 0 and DC[nax + j - 1] > 0):
dep += [nax + j - 1]
if (np.sum(DC) == len(DC)):
dep += [len(DC) - 1]
if (np.sum(DC) == -len(DC)):
dep += [0]
if (len(dep) == 0):
dep += [nax]
dep = np.array(dep)
if (np.sum(dep < nax) > np.sum(dep > nax)):
dep = dep[dep < nax]
elif (np.sum(dep < nax) < np.sum(dep > nax)):
dep = dep[dep > nax]
else:
dep = [nax]
findepii += [np.median(dep)]
findep = int(np.median(findepii))
"""
if(i != 0):
if(findep > findepm1 + 5):
findep = findepm1 + 5
elif(findep < findepm1 - 5):
findep = findepm1 - 5
findepm1 = findep
"""
findeps += [findep]
#newpoints[i] = Pi[findep].copy()
changepoints += [Pi0[findep].copy()]
"""
dc = self.mask.getDensity(frame[pi[0], pi[1]]) - self.mask.lambd
nite = 0
if(dc < 0):
while(dc < 0 and nite < 50):
pi = self.currentcontour.getPixelToNormal(pi, - ni).copy()
dc = self.mask.getDensity(frame[pi[0] % self.shape[0], pi[1] % self.shape[1]]) - self.mask.lambd
nite += 1
else:
while(dc > 0 and nite < 50):
pi = self.currentcontour.getPixelToNormal(pi, ni).copy()
dc = self.mask.getDensity(frame[pi[0], pi[1]]) - self.mask.lambd
nite += 1
if(nite < 50):newpoints[i] = pi.copy()
"""
#plt.plot(np.arange(len(findeps)), np.array(findeps) - 25)
#plt.show()
self.currentcontour = Contour(changepoints, self.shape)
if (PARAMS["verbose"]): self.currentcontour.render()
return self.currentcontour.interior.copy()
def test_reduction_morris(self):
cseg1 = Contour([0, 4, 3, 2, 5, 5, 1])
cseg2 = Contour([7, 10, 9, 0, 2, 3, 1, 8, 6, 2, 4, 5])
self.assertEqual(cseg1.reduction_morris(), [Contour([0, 2, 1]), 2])
self.assertEqual(cseg2.reduction_morris(), [Contour([2, 3, 0, 1]), 3])
def test_interval_array(self):
cseg = Contour([0, 1, 3, 2])
self.assertEqual(cseg.interval_array(), ([2, 2, 1], [1, 0, 0]))