def __init__(
self,
bit_one_part_min_duration=55, # microseconds
bit_one_part_max_duration=61,
bit_one_part_duration=58,
bit_zero_part_min_duration=95,
bit_zero_part_max_duration=9900,
bit_zero_part_duration=100,
packet_separation=5):
"""
These arguments should be helpful in tweaking the outputs to better
fit the hardware or specific decoder requirements. I.e. if your
hardware shapes the signal on longer/shorter intervals than the
actual value, it can be adjusted here.
Currently only bit_X_part_duration and packet_separation are used.
Older decoders need a 5ms packet separation. Performance should improve
by making it 0 if working with new decoders.
"""
DCCEncoder.__init__(self, bit_one_part_min_duration,
bit_one_part_max_duration, bit_one_part_duration,
bit_zero_part_min_duration,
bit_zero_part_max_duration, bit_zero_part_duration,
packet_separation)
self._string_payload = ""
self._idle_packet_string = self.idle_packet.to_bit_string()
self._reset_packet_string = self.reset_packet.to_bit_string()
self._stop_packet_string = self.stop_packet.to_bit_string()
def __init__(self,
bit_one_part_min_duration=55, # microseconds
bit_one_part_max_duration=61,
bit_one_part_duration=58,
bit_zero_part_min_duration=95,
bit_zero_part_max_duration=9900,
bit_zero_part_duration=100,
packet_separation=5,pin_a=1,pin_b=2,pin_break=3):
"""
These arguments should be helpful in tweaking the outputs to better
fit the hardware or specific decoder requirements. I.e. if your
hardware shapes the signal on longer/shorter intervals than the
actual value, it can be adjusted here.
Currently only bit_X_part_duration and packet_separation are used.
Older decoders need a 5ms packet separation. Performance should improve
by making it 0 if working with new decoders.
"""
self.set_pins(pin_a,pin_b,pin_break)
DCCEncoder.__init__(self,
bit_one_part_min_duration,
bit_one_part_max_duration,
bit_one_part_duration,
bit_zero_part_min_duration,
bit_zero_part_max_duration,
bit_zero_part_duration,
packet_separation)
self._string_payload = ""
self._idle_packet_string = self.idle_packet.to_bit_string()
self._reset_packet_string = self.reset_packet.to_bit_string()
self._stop_packet_string = self.stop_packet.to_bit_string()
def __init__(self):
DCCEncoder.__init__(self)