def main():
#global instruments
global master
global Heater
master = setup()
motor = motorSetup_mtk.motorConfig()
motor.setPIDhalfSpeed(master)
#motor.setPIDfullSpeed(instruments)
#motor.setPIDincfullSpeed(instruments)
Heater = heaterSetup_mtk.HeaterConfig() #initizalize class instance
Heater.setTempLimit(master)
Heater.setTcOffset(master)
Heater.setColdJunction(master)
Heater.setTcFilter(master)
Heater.setPid(master, Heater.RpidReg, 9, Heater.Rpid)
Heater.setPid(master, Heater.MpidReg, 9, Heater.Mpid)
Heater.setPid(master, Heater.FpidReg, 9, Heater.Fpid)
Heater.setPid(master, Heater.UpGratepidReg, 9, Heater.UpGratepid)
Heater.setPid(master, Heater.LoGratepidReg, 9, Heater.LoGratepid)
homing_mtk.goHome(master, 1)
motor.setPIDfullSpeed(master)
setpoint_wp.movePlaten(master, CookProfile.hoodHeight)
currentTime = 0
rearTemp, midTemp, frontTemp, UpGrateTemp, LoGrateTemp = readTemp()
button = 1
while True:
print "\n "
print "Press %r to start new cycle cook time: %rs RearSP:%r dC MidSP:%r dC" % (
CookProfile.KeyControl, CookProfile.cookTime, Heater.TemperatureSP[0], Heater.TemperatureSP[2])
done = False
while not done:
Heater.setTemp(master)
RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV = readTemp()
rearTemp, midTemp = dMod(master, rearTemp, midTemp, RearPV, MiddlePV, FrontPV)
UpGrateTemp, LoGrateTemp = dModGrate(master, UpGrateTemp, LoGrateTemp, UpGratePV, LoGratePV)
button = master.execute(1,cst.READ_COILS,2,1) #(id, cst.WRITE_SINGLE_COIL, 35, output_value=state) #(slave,function,address,output)
button = button[0]
done = keyScan(1,button,1,1)
if msvcrt.kbhit():
Key = msvcrt.getch()
done = keyScan(2,1,Key,CookProfile.KeyControl)
#moving platen to setpoint
setpoint_wp.movePlaten(master, CookProfile.stage1)
filename = strftime(CookProfile.file_name, time.localtime())
f = open(filename, "w")
f.write("\n")
f.write("\n")
f.write(strftime("Time:%a, %Y%b%d %H:%M:%S\n", time.localtime()))
f.write("\n")
f.write("---------------------Cooking Profile------------------\n")
f.write("\n")
f.write("Cooktime:%r s RearSP: %r dC MidSP:%r dC \n" % (
CookProfile.cookTime, Heater.TemperatureSP[0], Heater.TemperatureSP[2]))
f.write("------------------------------------------------------\n")
f.write("----Logged Data(Time-RearTemp,MiddleTmp,FrontTemp-----\n")
f.write("------------------------------------------------------\n")
gflag = 0
flag = 0
for x in range(0, 3):
winsound.Beep(1000, 200)
time.sleep(0.1)
startTime = time.time()
done = False
while timeCal(startTime) < CookProfile.cookTime:
if currentTime != int(timeCal(startTime)):
currentTime = int(timeCal(startTime))
RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV = readTemp()
f.write("%r,%r,%r,%r,%r,%r\n" % (currentTime, RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV))
print "Rear heater: %r, Mid heater: %r, Front heater: %r, time: %r s\n" % (
RearPV, MiddlePV, FrontPV, CookProfile.cookTime - currentTime)
if done:
break
if timeCal(startTime) > CookProfile.gapTime and gflag == 0:
gflag = 1
#moving platen to setpoint
setpoint_wp.movePlaten(master, CookProfile.stage2)
if timeCal(startTime) > CookProfile.cookTime - 6 and flag == 0:
flag = 1
for x in range(0, 2):
winsound.Beep(1000, 200)
time.sleep(0.1)
button = master.execute(1,cst.READ_COILS,2,1) #(slave,function,address,output)
button = button[0]
done = keyScan(1,button,1,1)
RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV = readTemp()
rearTemp, midTemp = dMod(master, rearTemp, midTemp, RearPV, MiddlePV, FrontPV)
UpGrateTemp, LoGrateTemp = dModGrate(master, UpGrateTemp, LoGrateTemp, UpGratePV, LoGratePV)
#f.write("%r,%r,%r,%r,%r,%r\n" % (currentTime, RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV))
winsound.Beep(1000, 1000)
f.close()
#moving platen to setpoint
setpoint_wp.movePlaten(master, CookProfile.hoodHeight)
def main():
global master
global cookInfo
global Heater
#load settings from file
cooker = CookProfile()
with open('cookProfile.csv', 'rb') as cook:
reader = csv.reader(cook)
for cookInfo in reader:
x = 1
cook.close()
cooker.setProfile(cookInfo)
print "Load cookProfile.csv...Completed"
master = setup()
Heater = heaterSetup_mtk.HeaterConfig() # initizalize class instance
Heater.setTempLimit(master)
Heater.setTcOffset(master)
Heater.setColdJunction(master)
Heater.setTcFilter(master)
Heater.setPid(master, Heater.RpidReg, 9, Heater.Rpid)
Heater.setPid(master, Heater.MpidReg, 9, Heater.Mpid)
Heater.setPid(master, Heater.FpidReg, 9, Heater.Fpid)
Heater.setPid(master, Heater.UpGratepidReg, 9, Heater.UpGratepid)
Heater.setPid(master, Heater.LoGratepidReg, 9, Heater.LoGratepid)
currentTime = 0
rearTemp, midTemp, frontTemp, UpGrateTemp, LoGrateTemp = readTemp()
button = 1
while True:
print "\n "
print "Press %r to start | Cook time:%rs Platen Time:%rs RearSP:%r dC MidSP:%r dC" % (
cooker.KeyControl, cooker.cookTime, cooker.platenTime,
Heater.TemperatureSP[0], Heater.TemperatureSP[2])
done = False
while not done:
Heater.setTemp(master)
RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV = readTemp()
rearTemp, midTemp = dMod(master, rearTemp, midTemp, RearPV,
MiddlePV, FrontPV)
UpGrateTemp, LoGrateTemp = dModGrate(master, UpGrateTemp,
LoGrateTemp, UpGratePV,
LoGratePV)
button = master.execute(1, cst.READ_COILS, 2,
1) # (slave,function,address,output)
button = button[0]
done = keyScan(1, 15, button, 1, 1)
if msvcrt.kbhit():
Key = msvcrt.getch()
done = keyScan(2, 15, 1, Key, cooker.KeyControl)
openName = cooker.file_name + strftime("%Y%b%d_%H.%M.%S",
time.localtime()) + ".csv"
with open(openName, 'w') as log:
fieldInfo = ('StartTime', 'CookTime', 'PlatenTime', 'CookZone',
'RearSP', 'MidSP', 'FrontSP', 'RearPID', 'MidPID',
'FrontPID')
targetInfo = csv.DictWriter(log,
delimiter=',',
lineterminator='\n',
fieldnames=fieldInfo)
Infoheaders = dict((n, n) for n in fieldInfo)
targetInfo.writerow(Infoheaders)
targetInfo.writerow({
'StartTime':
strftime("Time: %Y %b %d %H:%M:%S", time.localtime()),
'CookTime':
cooker.cookTime,
'PlatenTime':
cooker.platenTime,
'CookZone':
cooker.cookZone,
'RearSP':
Heater.TemperatureSP[0],
'MidSP':
Heater.TemperatureSP[2],
'FrontSP':
Heater.TemperatureSP[4],
'RearPID':
Heater.Rpid,
'MidPID':
Heater.Mpid,
'FrontPID':
Heater.Fpid
})
fieldnames = ('Time', 'RearTemp', 'MiddleTemp', 'FrontTemp',
'UpGrate', 'LoGrate', 'RearPWM', 'UpPWM',
'MiddlePWM', 'LoPWM', 'FrontPWM')
targetWriter = csv.DictWriter(log,
delimiter=',',
lineterminator='\n',
fieldnames=fieldnames)
headers = dict((n, n) for n in fieldnames)
targetWriter.writerow(headers)
flag = 0
for x in range(0, 3):
winsound.Beep(1000, 200)
time.sleep(0.1)
startTime = time.time()
done = False
while timeCal(startTime) < cooker.totalTime:
if currentTime != int(timeCal(startTime)):
currentTime = int(timeCal(startTime))
RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV = readTemp(
)
pwm = Heater.readPWM(master)
targetWriter.writerow({
'Time': currentTime,
'RearTemp': RearPV,
'MiddleTemp': MiddlePV,
'FrontTemp': FrontPV,
'UpGrate': UpGratePV,
'LoGrate': LoGratePV,
'RearPWM': pwm[0],
'UpPWM': pwm[1],
'MiddlePWM': pwm[2],
'LoPWM': pwm[3],
'FrontPWM': pwm[4]
})
print "Rear heater: %r, Mid heater: %r, Front heater: %r, time: %r s\n" % (
RearPV, MiddlePV, FrontPV,
cooker.totalTime - currentTime)
if done:
break
if timeCal(startTime) > cooker.totalTime - 6 and flag == 0:
flag = 1
for x in range(0, 2):
winsound.Beep(1000, 200)
time.sleep(0.1)
button = master.execute(1, cst.READ_COILS, 2,
1) # (slave,function,address,output)
button = button[0]
done = keyScan(1, int(timeCal(startTime)), button, 1, 1)
RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV = readTemp()
rearTemp, midTemp = dMod(master, rearTemp, midTemp, RearPV,
MiddlePV, FrontPV)
UpGrateTemp, LoGrateTemp = dModGrate(master, UpGrateTemp,
LoGrateTemp, UpGratePV,
LoGratePV)
log.close()
winsound.Beep(1000, 1000)
def main():
global master
global cookInfo
global Heater
#load settings from file
cooker = CookProfile()
with open('cookProfile.csv', 'rb') as cook:
reader = csv.reader(cook)
for cookInfo in reader:
x = 1
cook.close()
cooker.setProfile(cookInfo)
print "Load cookProfile.csv...Completed"
master = setup()
motor = motorSetup_mtk.motorConfig()
motor.setPIDhalfSpeed(master)
Heater = heaterSetup_mtk.HeaterConfig() # initizalize class instance
Heater.setTempLimit(master)
Heater.setTcOffset(master)
Heater.setColdJunction(master)
Heater.setTcFilter(master)
Heater.setPid(master, Heater.RpidReg, 9, Heater.Rpid)
Heater.setPid(master, Heater.MpidReg, 9, Heater.Mpid)
Heater.setPid(master, Heater.FpidReg, 9, Heater.Fpid)
Heater.setPid(master, Heater.UpGratepidReg, 9, Heater.UpGratepid)
Heater.setPid(master, Heater.LoGratepidReg, 9, Heater.LoGratepid)
homing_mtk.goHome(master, 1)
motor.setPIDfullSpeed(master)
setpoint_wp.movePlaten(master, cooker.hoodHeight)
currentTime = 0
rearTemp, midTemp, frontTemp, UpGrateTemp, LoGrateTemp = readTemp()
button = 1
while True:
print "\n "
print "Press %r to start | Cook time:%rs Platen Time:%rs RearSP:%r dC MidSP:%r dC" % (
cooker.KeyControl, cooker.cookTime, cooker.platenTime, Heater.TemperatureSP[0], Heater.TemperatureSP[2])
done = False
while not done:
Heater.setTemp(master)
RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV = readTemp()
rearTemp, midTemp = dMod(master, rearTemp, midTemp, RearPV, MiddlePV, FrontPV)
UpGrateTemp, LoGrateTemp = dModGrate(master, UpGrateTemp, LoGrateTemp, UpGratePV, LoGratePV)
button = master.execute(1, cst.READ_COILS, 2, 1) # (slave,function,address,output)
button = button[0]
done = keyScan(1, 15, button, 1, 1)
if msvcrt.kbhit():
Key = msvcrt.getch()
done = keyScan(2, 15, 1, Key, cooker.KeyControl)
# moving platen to setpoint
setpoint_wp.movePlaten(master, cooker.cookZone)
openName = cooker.file_name + strftime("%Y%b%d_%H.%M.%S", time.localtime()) + ".csv"
with open(openName, 'w') as log:
fieldInfo = (
'StartTime', 'CookTime', 'PlatenTime', 'CookZone', 'RearSP', 'MidSP', 'FrontSP', 'RearPID', 'MidPID',
'FrontPID')
targetInfo = csv.DictWriter(log, delimiter=',', lineterminator='\n', fieldnames=fieldInfo)
Infoheaders = dict((n, n) for n in fieldInfo)
targetInfo.writerow(Infoheaders)
targetInfo.writerow(
{'StartTime': strftime("Time: %Y %b %d %H:%M:%S", time.localtime()), 'CookTime': cooker.cookTime,
'PlatenTime': cooker.platenTime, 'CookZone': cooker.cookZone, 'RearSP': Heater.TemperatureSP[0],
'MidSP': Heater.TemperatureSP[2], 'FrontSP': Heater.TemperatureSP[4], 'RearPID': Heater.Rpid,
'MidPID': Heater.Mpid, 'FrontPID': Heater.Fpid})
fieldnames = (
'Time', 'RearTemp', 'MiddleTemp', 'FrontTemp', 'UpGrate', 'LoGrate', 'RearPWM', 'UpPWM', 'MiddlePWM',
'LoPWM', 'FrontPWM')
targetWriter = csv.DictWriter(log, delimiter=',', lineterminator='\n', fieldnames=fieldnames)
headers = dict((n, n) for n in fieldnames)
targetWriter.writerow(headers)
flag = 0
for x in range(0, 3):
winsound.Beep(1000, 200)
time.sleep(0.1)
startTime = time.time()
done = False
while timeCal(startTime) < cooker.totalTime:
if currentTime != int(timeCal(startTime)):
currentTime = int(timeCal(startTime))
RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV = readTemp()
pwm = Heater.readPWM(master)
targetWriter.writerow(
{'Time': currentTime, 'RearTemp': RearPV, 'MiddleTemp': MiddlePV, 'FrontTemp': FrontPV,
'UpGrate': UpGratePV, 'LoGrate': LoGratePV, 'RearPWM': pwm[0], 'UpPWM': pwm[1],
'MiddlePWM': pwm[2], 'LoPWM': pwm[3], 'FrontPWM': pwm[4]})
print "Rear heater: %r, Mid heater: %r, Front heater: %r, time: %r s\n" % (
RearPV, MiddlePV, FrontPV, cooker.totalTime - currentTime)
if done:
break
if timeCal(startTime) > cooker.totalTime - 6 and flag == 0:
flag = 1
for x in range(0, 2):
winsound.Beep(1000, 200)
time.sleep(0.1)
button = master.execute(1, cst.READ_COILS, 2, 1) # (slave,function,address,output)
button = button[0]
done = keyScan(1, int(timeCal(startTime)), button, 1, 1)
RearPV, MiddlePV, FrontPV, UpGratePV, LoGratePV = readTemp()
rearTemp, midTemp = dMod(master, rearTemp, midTemp, RearPV, MiddlePV, FrontPV)
UpGrateTemp, LoGrateTemp = dModGrate(master, UpGrateTemp, LoGrateTemp, UpGratePV, LoGratePV)
log.close()
winsound.Beep(1000, 1000)
# moving platen to setpoint
setpoint_wp.movePlaten(master, cooker.hoodHeight)