def _run_report(backend_to_use):
data_source = ReportFactory.from_spec(spec,
include_prefilters=True,
backend=backend_to_use)
data_source.set_filter_values(filter_values)
if sort_column:
data_source.set_order_by([
(data_source.top_level_columns[int(sort_column)].column_id,
sort_order.upper())
])
if params:
datatables_params = DatatablesParams.from_request_dict(params)
start = datatables_params.start
limit = datatables_params.count
else:
start, limit = None, None
page = list(data_source.get_data(start=start, limit=limit))
total_records = data_source.get_total_records()
json_response = {
'aaData': page,
"iTotalRecords": total_records,
}
total_row = data_source.get_total_row(
) if data_source.has_total_row else None
if total_row is not None:
json_response["total_row"] = total_row
return json_response
def get_ajax(self, params):
try:
data_source = self.data_source
if len(data_source.inner_columns
) > 50 and not DISABLE_COLUMN_LIMIT_IN_UCR.enabled(
self.domain):
raise UserReportsError(
_("This report has too many columns to be displayed"))
data_source.set_filter_values(self.filter_values)
sort_column = params.get('iSortCol_0')
sort_order = params.get('sSortDir_0', 'ASC')
echo = int(params.get('sEcho', 1))
if sort_column and echo != 1:
data_source.set_order_by([
(data_source.top_level_columns[int(sort_column)].column_id,
sort_order.upper())
])
datatables_params = DatatablesParams.from_request_dict(params)
page = list(
data_source.get_data(start=datatables_params.start,
limit=datatables_params.count))
total_records = data_source.get_total_records()
total_row = data_source.get_total_row(
) if data_source.has_total_row else None
except UserReportsError as e:
if settings.DEBUG:
raise
return self.render_json_response({
'error': e.message,
'aaData': [],
'iTotalRecords': 0,
'iTotalDisplayRecords': 0,
})
except TableNotFoundWarning:
if self.spec.report_meta.created_by_builder:
msg = _(
"The database table backing your report does not exist yet. "
"Please wait while the report is populated.")
else:
msg = _(
"The database table backing your report does not exist yet. "
"You must rebuild the data source before viewing the report."
)
return self.render_json_response({'warning': msg})
json_response = {
'aaData': page,
"sEcho": params.get('sEcho', 0),
"iTotalRecords": total_records,
"iTotalDisplayRecords": total_records,
}
if total_row is not None:
json_response["total_row"] = total_row
if data_source.data_source.config.backend_id == UCR_LABORATORY_BACKEND:
compare_ucr_dbs.delay(self.domain, self.report_config_id,
self.filter_values, sort_column, sort_order,
params)
return self.render_json_response(json_response)
def get_ajax(self, request):
try:
data_source = self.data_source
if len(data_source.columns) > 50:
raise UserReportsError(_("This report has too many columns to be displayed"))
data_source.set_filter_values(self.filter_values)
sort_column = request.GET.get('iSortCol_0')
sort_order = request.GET.get('sSortDir_0', 'ASC')
echo = int(request.GET.get('sEcho', 1))
if sort_column and echo != 1:
data_source.set_order_by(
[(data_source.column_configs[int(sort_column)].column_id, sort_order.upper())]
)
total_records = data_source.get_total_records()
except UserReportsError as e:
if settings.DEBUG:
raise
return self.render_json_response({
'error': e.message,
'aaData': [],
'iTotalRecords': 0,
'iTotalDisplayRecords': 0,
})
except TableNotFoundWarning:
if self.spec.report_meta.created_by_builder:
msg = _(
"The database table backing your report does not exist yet. "
"Please wait while the report is populated."
)
else:
msg = _(
"The database table backing your report does not exist yet. "
"You must rebuild the data source before viewing the report."
)
return self.render_json_response({
'warning': msg
})
# todo: this is ghetto pagination - still doing a lot of work in the database
datatables_params = DatatablesParams.from_request_dict(request.GET)
end = min(datatables_params.start + datatables_params.count, total_records)
data = list(data_source.get_data())
page = data[datatables_params.start:end]
json_response = {
'aaData': page,
"sEcho": self.request_dict.get('sEcho', 0),
"iTotalRecords": total_records,
"iTotalDisplayRecords": total_records,
}
if data_source.has_total_row:
json_response.update({
"total_row": get_total_row(
data, data_source.aggregation_columns, data_source.column_configs,
get_expanded_columns(data_source.column_configs, data_source.config)
),
})
return self.render_json_response(json_response)
def get_ajax(self, params):
try:
data_source = self.data_source
if len(data_source.inner_columns) > 50 and not DISABLE_COLUMN_LIMIT_IN_UCR.enabled(self.domain):
raise UserReportsError(_("This report has too many columns to be displayed"))
data_source.set_filter_values(self.filter_values)
sort_column = params.get('iSortCol_0')
sort_order = params.get('sSortDir_0', 'ASC')
echo = int(params.get('sEcho', 1))
if sort_column and echo != 1:
data_source.set_order_by(
[(data_source.top_level_columns[int(sort_column)].column_id, sort_order.upper())]
)
datatables_params = DatatablesParams.from_request_dict(params)
page = list(data_source.get_data(start=datatables_params.start, limit=datatables_params.count))
total_records = data_source.get_total_records()
total_row = data_source.get_total_row() if data_source.has_total_row else None
except UserReportsError as e:
if settings.DEBUG:
raise
return self.render_json_response({
'error': e.message,
'aaData': [],
'iTotalRecords': 0,
'iTotalDisplayRecords': 0,
})
except TableNotFoundWarning:
if self.spec.report_meta.created_by_builder:
msg = _(
"The database table backing your report does not exist yet. "
"Please wait while the report is populated."
)
else:
msg = _(
"The database table backing your report does not exist yet. "
"You must rebuild the data source before viewing the report."
)
return self.render_json_response({
'warning': msg
})
json_response = {
'aaData': page,
"sEcho": params.get('sEcho', 0),
"iTotalRecords": total_records,
"iTotalDisplayRecords": total_records,
}
if total_row is not None:
json_response["total_row"] = total_row
if data_source.data_source.config.backend_id == UCR_LABORATORY_BACKEND:
compare_ucr_dbs.delay(
self.domain, self.report_config_id, self.filter_values,
sort_column, sort_order, params
)
return self.render_json_response(json_response)
def get_ajax(self, request):
try:
data_source = self.data_source
if len(data_source.columns) > 50:
raise UserReportsError(_("This report has too many columns to be displayed"))
data_source.set_filter_values(self.filter_values)
sort_column = request.GET.get('iSortCol_0')
sort_order = request.GET.get('sSortDir_0', 'ASC')
echo = int(request.GET.get('sEcho', 1))
if sort_column and echo != 1:
data_source.set_order_by(
[(data_source.column_configs[int(sort_column)].column_id, sort_order.upper())]
)
datatables_params = DatatablesParams.from_request_dict(request.GET)
page = list(data_source.get_data(start=datatables_params.start, limit=datatables_params.count))
total_records = data_source.get_total_records()
total_row = data_source.get_total_row() if data_source.has_total_row else None
except UserReportsError as e:
if settings.DEBUG:
raise
return self.render_json_response({
'error': e.message,
'aaData': [],
'iTotalRecords': 0,
'iTotalDisplayRecords': 0,
})
except TableNotFoundWarning:
if self.spec.report_meta.created_by_builder:
msg = _(
"The database table backing your report does not exist yet. "
"Please wait while the report is populated."
)
else:
msg = _(
"The database table backing your report does not exist yet. "
"You must rebuild the data source before viewing the report."
)
return self.render_json_response({
'warning': msg
})
json_response = {
'aaData': page,
"sEcho": self.request_dict.get('sEcho', 0),
"iTotalRecords": total_records,
"iTotalDisplayRecords": total_records,
}
if total_row is not None:
json_response["total_row"] = total_row
return self.render_json_response(json_response)
def get_ajax(self, request):
try:
data_source = self.data_source
if len(data_source.columns) > 50:
raise UserReportsError(_("This report has too many columns to be displayed"))
data_source.set_filter_values(self.filter_values)
sort_column = request.GET.get('iSortCol_0')
sort_order = request.GET.get('sSortDir_0', 'ASC')
echo = int(request.GET.get('sEcho', 1))
if sort_column and echo != 1:
data_source.set_order_by(
[(data_source.column_configs[int(sort_column)].column_id, sort_order.upper())]
)
datatables_params = DatatablesParams.from_request_dict(request.GET)
page = list(data_source.get_data(start=datatables_params.start, limit=datatables_params.count))
total_records = data_source.get_total_records()
total_row = data_source.get_total_row() if data_source.has_total_row else None
except UserReportsError as e:
if settings.DEBUG:
raise
return self.render_json_response({
'error': e.message,
'aaData': [],
'iTotalRecords': 0,
'iTotalDisplayRecords': 0,
})
except TableNotFoundWarning:
if self.spec.report_meta.created_by_builder:
msg = _(
"The database table backing your report does not exist yet. "
"Please wait while the report is populated."
)
else:
msg = _(
"The database table backing your report does not exist yet. "
"You must rebuild the data source before viewing the report."
)
return self.render_json_response({
'warning': msg
})
json_response = {
'aaData': page,
"sEcho": self.request_dict.get('sEcho', 0),
"iTotalRecords": total_records,
"iTotalDisplayRecords": total_records,
}
if total_row is not None:
json_response["total_row"] = total_row
return self.render_json_response(json_response)
def get_ajax(self, request, domain=None, **kwargs):
data = self.data_source
data.set_filter_values(self.filter_values)
total_records = data.get_total_records()
# todo: this is ghetto pagination - still doing a lot of work in the database
datatables_params = DatatablesParams.from_request_dict(request.GET)
end = min(datatables_params.start + datatables_params.count, total_records)
page = list(data.get_data())[datatables_params.start:end]
return self.render_json_response({
'aaData': page,
"sEcho": self.request_dict.get('sEcho', 0),
"iTotalRecords": total_records,
"iTotalDisplayRecords": total_records,
})
def get_ajax(self, request, domain=None, **kwargs):
try:
data = self.data_source
data.set_filter_values(self.filter_values)
data.set_order_by([(o['field'], o['order']) for o in self.spec.sort_expression])
total_records = data.get_total_records()
except UserReportsError as e:
if settings.DEBUG:
raise
return self.render_json_response({
'error': e.message,
})
except TableNotFoundWarning:
if self.spec.report_meta.created_by_builder:
msg = _(
"The database table backing your report does not exist yet. "
"Please wait while the report is populated."
)
else:
msg = _(
"The database table backing your report does not exist yet. "
"You must rebuild the data source before viewing the report."
)
return self.render_json_response({
'warning': msg
})
# todo: this is ghetto pagination - still doing a lot of work in the database
datatables_params = DatatablesParams.from_request_dict(request.GET)
end = min(datatables_params.start + datatables_params.count, total_records)
page = list(data.get_data())[datatables_params.start:end]
return self.render_json_response({
'aaData': page,
"sEcho": self.request_dict.get('sEcho', 0),
"iTotalRecords": total_records,
"iTotalDisplayRecords": total_records,
})
def pagination(self):
if self._pagination is None:
self._pagination = DatatablesParams.from_request_dict(self.request.REQUEST)
return self._pagination
def pagination(self):
if self._pagination is None:
self._pagination = DatatablesParams.from_request_dict(
self.request.POST if self.request.method ==
'POST' else self.request.GET)
return self._pagination
def pagination(self):
if self._pagination is None:
self._pagination = DatatablesParams.from_request_dict(
self.request.REQUEST)
return self._pagination
def pagination(self):
if self._pagination is None:
self._pagination = DatatablesParams.from_request_dict(
self.request.POST if self.request.method == 'POST' else self.request.GET
)
return self._pagination