def surface_temp_8(band4_toa,
meta_path,
path_rad,
nbt,
sky_rad,
outdir=False,
L=0.5):
"""
Calculates surface temperature from Landsat 8 OLI and TIRS data.
Requires band 4 and 5 Top-of-Atmosphere Reflectance tiffs and the unprocessed band 10 and 11 tiffs.
*Note: if the default values of 0, 1, and 0 are used for the Path Radiance, Narrowband Transmissivity, and Sky Radiance constants,
atmospheric conditions will not be accounted for and the surface values may be off. Values are attainable using MODTRAN.
Inputs:
band4_toa Filepath to the Band 4 Top-of-Atmosphere Reflectance tiff
*use landsat.toa_reflectance_8
meta_path Filepath to the metadata file (ending in _MTL.txt)
path_rad Path Radiance constant
*default 0
nbt Narrowband Transmissivity constant
*default 1
sky_rad Sky Radiance constant
*default 0
outdir Path to the desired output folder
*if left False the output tiff will be place in band4_toa's folder
L Soil brightness correction factor, between 0 and 1
*used to calculate Soil Adjusted Vegetation Index
*default L = 0.5 works well in most situations
*when L = 0, SAVI = NDVI
"""
band4_toa = os.path.abspath(band4_toa)
meta_path = os.path.abspath(meta_path)
#Grab metadata from the MTL file and set the pathnames for Band 5 TOA Reflectance and the raw Band 11 tiffs
meta = grab_meta(meta_path)
band5_toa = band4_toa.replace("_B4_", "_B5_")
band10 = meta_path.replace("_MTL.txt", "_B10.tif")
band11 = band10.replace("_B10.tif", "_B11.tif")
#Soil Adjusted Vegetation Index
red = arcpy.sa.Float(band4_toa)
nir = arcpy.sa.Float(band5_toa)
savi = ((1 + L) * (nir - red)) / (L + (nir - red))
#Leaf Area Index
#assigns LAI for 0.1 <= SAVI <= 0.687
lai_1 = ((arcpy.sa.Ln((0.69 - savi) / 0.59)) / (-0.91))
#assigns LAI for SAVI >= 0.687
lai_2 = arcpy.sa.Con(savi, lai_1, 6, "VALUE < 0.687")
#assigns LAI for SAVI <= 0.1
lai = arcpy.sa.Con(savi, lai_2, 0, "VALUE >= 0.1")
#Narrow Band Emissivity
remap = 0.97 + (0.0033 * lai)
nbe = arcpy.sa.Con(lai, remap, 0.98, "VALUE <= 3")
#Get the radiance mult/add bands for bands 10 and 11
Ml_10 = getattr(meta, "RADIANCE_MULT_BAND_10")
Al_10 = getattr(meta, "RADIANCE_ADD_BAND_10")
Ml_11 = getattr(meta, "RADIANCE_MULT_BAND_11")
Al_11 = getattr(meta, "RADIANCE_ADD_BAND_11")
#Set values in the TIRS band tiffs to null
null_10 = arcpy.sa.SetNull(band10, band10, "VALUE <= 1")
null_11 = arcpy.sa.SetNull(band11, band11, "VALUE <= 1")
#Initial Thermal Radiances
itr_10 = (null_10 * Ml_10) + Al_10
itr_11 = (null_11 * Ml_11) + Al_11
#Corrected Thermal Radiances
ctr_10 = ((itr_10 - path_rad) / nbt) - ((1 - nbe) * sky_rad)
ctr_11 = ((itr_11 - path_rad) / nbt) - ((1 - nbe) * sky_rad)
#Get the K1 and K2 constants for bands 10 and 11
K1_10 = getattr(meta, "K1_CONSTANT_BAND_10")
K2_10 = getattr(meta, "K2_CONSTANT_BAND_10")
K1_11 = getattr(meta, "K1_CONSTANT_BAND_11")
K2_11 = getattr(meta, "K2_CONSTANT_BAND_11")
#Calculate surface temperature based on bands 10 and 11 and average them for final output
st_10 = (K2_10 / (arcpy.sa.Ln(((nbe * K1_10) / ctr_10) + 1)))
st_11 = (K2_11 / (arcpy.sa.Ln(((nbe * K1_11) / ctr_10) + 1)))
st = (st_10 + st_11) / 2
#Create output name and save the Surface Temperature tiff
tilename = getattr(meta, "LANDSAT_SCENE_ID")
if outdir:
outdir = os.path.abspath(outdir)
outname = core.create_outname(outdir, tilename, "Surf_Temp", "tif")
else:
folder = os.path.split(band4_toa)[0]
outname = core.create_outname(folder, tilename, "Surf_Temp", "tif")
st.save(outname)
return outname
def surface_temp_8(band4_toa, meta_path, path_rad, nbt, sky_rad, outdir = False, L = 0.5):
"""
Calculates surface temperature from Landsat 8 OLI and TIRS data.
Requires band 4 and 5 Top-of-Atmosphere Reflectance tiffs and the unprocessed band 10 and 11 tiffs.
*Note: if the default values of 0, 1, and 0 are used for the Path Radiance, Narrowband Transmissivity, and Sky Radiance constants,
atmospheric conditions will not be accounted for and the surface values may be off. Values are attainable using MODTRAN.
Inputs:
band4_toa Filepath to the Band 4 Top-of-Atmosphere Reflectance tiff
*use landsat.toa_reflectance_8
meta_path Filepath to the metadata file (ending in _MTL.txt)
path_rad Path Radiance constant
*default 0
nbt Narrowband Transmissivity constant
*default 1
sky_rad Sky Radiance constant
*default 0
outdir Path to the desired output folder
*if left False the output tiff will be place in band4_toa's folder
L Soil brightness correction factor, between 0 and 1
*used to calculate Soil Adjusted Vegetation Index
*default L = 0.5 works well in most situations
*when L = 0, SAVI = NDVI
"""
band4_toa = os.path.abspath(band4_toa)
meta_path = os.path.abspath(meta_path)
#Grab metadata from the MTL file and set the pathnames for Band 5 TOA Reflectance and the raw Band 11 tiffs
meta = grab_meta(meta_path)
band5_toa = band4_toa.replace("_B4_", "_B5_")
band10 = meta_path.replace("_MTL.txt", "_B10.tif")
band11 = band10.replace("_B10.tif", "_B11.tif")
#Soil Adjusted Vegetation Index
red = arcpy.sa.Float(band4_toa)
nir = arcpy.sa.Float(band5_toa)
savi = ((1 + L) * (nir - red))/(L + (nir - red))
#Leaf Area Index
#assigns LAI for 0.1 <= SAVI <= 0.687
lai_1 = ((arcpy.sa.Ln((0.69 - savi)/0.59))/(-0.91))
#assigns LAI for SAVI >= 0.687
lai_2 = arcpy.sa.Con(savi, lai_1, 6, "VALUE < 0.687")
#assigns LAI for SAVI <= 0.1
lai = arcpy.sa.Con(savi, lai_2, 0, "VALUE >= 0.1")
#Narrow Band Emissivity
remap = 0.97 + (0.0033 * lai)
nbe = arcpy.sa.Con(lai, remap, 0.98, "VALUE <= 3")
#Get the radiance mult/add bands for bands 10 and 11
Ml_10 = getattr(meta, "RADIANCE_MULT_BAND_10")
Al_10 = getattr(meta, "RADIANCE_ADD_BAND_10")
Ml_11 = getattr(meta, "RADIANCE_MULT_BAND_11")
Al_11 = getattr(meta, "RADIANCE_ADD_BAND_11")
#Set values in the TIRS band tiffs to null
null_10 = arcpy.sa.SetNull(band10, band10, "VALUE <= 1")
null_11 = arcpy.sa.SetNull(band11, band11, "VALUE <= 1")
#Initial Thermal Radiances
itr_10 = (null_10 * Ml_10) + Al_10
itr_11 = (null_11 * Ml_11) + Al_11
#Corrected Thermal Radiances
ctr_10 = ((itr_10 - path_rad)/nbt) - ((1 - nbe) * sky_rad)
ctr_11 = ((itr_11 - path_rad)/nbt) - ((1 - nbe) * sky_rad)
#Get the K1 and K2 constants for bands 10 and 11
K1_10 = getattr(meta, "K1_CONSTANT_BAND_10")
K2_10 = getattr(meta, "K2_CONSTANT_BAND_10")
K1_11 = getattr(meta, "K1_CONSTANT_BAND_11")
K2_11 = getattr(meta, "K2_CONSTANT_BAND_11")
#Calculate surface temperature based on bands 10 and 11 and average them for final output
st_10 = (K2_10/(arcpy.sa.Ln(((nbe * K1_10)/ctr_10) + 1)))
st_11 = (K2_11/(arcpy.sa.Ln(((nbe * K1_11)/ctr_10) + 1)))
st = (st_10 + st_11)/2
#Create output name and save the Surface Temperature tiff
tilename = getattr(meta, "LANDSAT_SCENE_ID")
if outdir:
outdir = os.path.abspath(outdir)
outname = core.create_outname(outdir, tilename, "Surf_Temp", "tif")
else:
folder = os.path.split(band4_toa)[0]
outname = core.create_outname(folder, tilename, "Surf_Temp", "tif")
st.save(outname)
return outname
def surface_temp_457(band3_toa,
meta_path,
path_rad,
nbt,
sky_rad,
outdir=False,
L=0.5):
"""
Calculates surface temperature from Landsat 4/5 TM or 7 ETM+ data.
Requires band 3 and 4 Top-of-Atmosphere Reflectance tiffs and the unprocessed band 6 (or 6_VCID_1 for Landsat 7) tiff.
*Note: if the default values of 0, 1, and 0 are used for the Path Radiance, Narrowband Transmissivity, and Sky Radiance constants,
atmospheric conditions will not be accounted for and the surface values may be off. Values are attainable using MODTRAN.
Inputs:
band3_toa Filepath to the Band 3 Top-of-Atmosphere Reflectance tiff
*use landsat.toa_reflectance_457
meta_path Filepath to the metadata file (ending in _MTL.txt)
path_rad Path Radiance constant
*default 0
nbt Narrowband Transmissivity constant
*default 1
sky_rad Sky Radiance constant
*default 0
outdir Path to the desired output folder
*if left False the output tiff will be place in band4_toa's folder
L Soil brightness correction factor, between 0 and 1
*used to calculate Soil Adjusted Vegetation Index
*default L = 0.5 works well in most situations
*when L = 0, SAVI = NDVI
"""
band3_toa = os.path.abspath(band3_toa)
meta_path = os.path.abspath(meta_path)
#Set the pathname for band 4
band4_toa = band3_toa.replace("_B3_", "_B4_")
#Grab metadata from the MTL file and identify the spacecraft ID
meta = grab_meta(meta_path)
spacecraft = getattr(meta, "SPACECRAFT_ID")
#Set the band 6 number, K1 and K2 thermal constants, and band 6 pathname based on spacecraft ID
if "4" in spacecraft or "5" in spacecraft:
band_num = "6"
K1 = 607.76
K2 = 1260.56
band6 = meta_path.replace("_MTL.txt", "_B6.tif")
elif "7" in spacecraft:
band_num = "6_VCID_1"
K1 = 666.09
K2 = 1282.71
band6 = meta_path.replace("_MTL.txt", "_B6_VCID_1.tif")
else:
print(
"Enter the MTL file corresponding to a Landsat 4, 5, or 7 dataset")
#Open the metadata text file and read to set the scene's tilename
f = open(meta_path)
MText = f.read()
if "PRODUCT_CREATION_TIME" in MText:
tilename = getattr(meta, "BAND1_FILE_NAME")
else:
tilename = getattr(meta, "LANDSAT_SCENE_ID")
#Soil Adjusted Vegetation Index
red = arcpy.sa.Float(band3_toa)
nir = arcpy.sa.Float(band4_toa)
savi = ((1 + L) * (nir - red)) / (L + (nir - red))
#Leaf Area Index
#assigns LAI for 0.1 <= SAVI <= 0.687
lai_1 = ((arcpy.sa.Ln((0.69 - savi) / 0.59)) / (-0.91))
#assigns LAI for SAVI >= 0.687
lai_2 = arcpy.sa.Con(savi, lai_1, 6, "VALUE < 0.687")
#assigns LAI for SAVI <= 0.1
lai = arcpy.sa.Con(savi, lai_2, 0, "VALUE >= 0.1")
#Narrow Band Emissivity
remap = 0.97 + (0.0033 * lai)
nbe = arcpy.sa.Con(lai, remap, 0.98, "VALUE <= 3")
#Get the radiance mult/add bands for bands 10 and 11
Ml = getattr(meta, "RADIANCE_MULT_BAND_{0}".format(band_num))
Al = getattr(meta, "RADIANCE_ADD_BAND_{0}".format(band_num))
#Set values in the TIRS band tiffs to null
null = arcpy.sa.SetNull(band6, band6, "VALUE <= 1")
#Initial Thermal Radiances
itr = (null * Ml) + Al
#Corrected Thermal Radiances
ctr = ((itr - path_rad) / nbt) - ((1 - nbe) * sky_rad)
#Calculate surface temperature
st = (K2 / (arcpy.sa.Ln(((nbe * K1) / ctr) + 1)))
#Create output name and save the surface temperature tiff
if outdir:
outdir = os.path.abspath(outdir)
outname = core.create_outname(outdir, tilename, "Surf_Temp", "tif")
else:
folder = os.path.split(band3_toa)[0]
outname = core.create_outname(folder, tilename, "Surf_Temp", "tif")
st.save(outname)
return outname
def surface_temp_457(band3_toa, meta_path, path_rad, nbt, sky_rad, outdir = False, L = 0.5):
"""
Calculates surface temperature from Landsat 4/5 TM or 7 ETM+ data.
Requires band 3 and 4 Top-of-Atmosphere Reflectance tiffs and the unprocessed band 6 (or 6_VCID_1 for Landsat 7) tiff.
*Note: if the default values of 0, 1, and 0 are used for the Path Radiance, Narrowband Transmissivity, and Sky Radiance constants,
atmospheric conditions will not be accounted for and the surface values may be off. Values are attainable using MODTRAN.
Inputs:
band3_toa Filepath to the Band 3 Top-of-Atmosphere Reflectance tiff
*use landsat.toa_reflectance_457
meta_path Filepath to the metadata file (ending in _MTL.txt)
path_rad Path Radiance constant
*default 0
nbt Narrowband Transmissivity constant
*default 1
sky_rad Sky Radiance constant
*default 0
outdir Path to the desired output folder
*if left False the output tiff will be place in band4_toa's folder
L Soil brightness correction factor, between 0 and 1
*used to calculate Soil Adjusted Vegetation Index
*default L = 0.5 works well in most situations
*when L = 0, SAVI = NDVI
"""
band3_toa = os.path.abspath(band3_toa)
meta_path = os.path.abspath(meta_path)
#Set the pathname for band 4
band4_toa = band3_toa.replace("_B3_", "_B4_")
#Grab metadata from the MTL file and identify the spacecraft ID
meta = grab_meta(meta_path)
spacecraft = getattr(meta, "SPACECRAFT_ID")
#Set the band 6 number, K1 and K2 thermal constants, and band 6 pathname based on spacecraft ID
if "4" in spacecraft or "5" in spacecraft:
band_num = "6"
K1 = 607.76
K2 = 1260.56
band6 = meta_path.replace("_MTL.txt", "_B6.tif")
elif "7" in spacecraft:
band_num = "6_VCID_1"
K1 = 666.09
K2 = 1282.71
band6 = meta_path.replace("_MTL.txt", "_B6_VCID_1.tif")
else:
print("Enter the MTL file corresponding to a Landsat 4, 5, or 7 dataset")
#Open the metadata text file and read to set the scene's tilename
f = open(meta_path)
MText = f.read()
if "PRODUCT_CREATION_TIME" in MText:
tilename = getattr(meta, "BAND1_FILE_NAME")
else:
tilename = getattr(meta, "LANDSAT_SCENE_ID")
#Soil Adjusted Vegetation Index
red = arcpy.sa.Float(band3_toa)
nir = arcpy.sa.Float(band4_toa)
savi = ((1 + L) * (nir - red))/(L + (nir - red))
#Leaf Area Index
#assigns LAI for 0.1 <= SAVI <= 0.687
lai_1 = ((arcpy.sa.Ln((0.69 - savi)/0.59))/(-0.91))
#assigns LAI for SAVI >= 0.687
lai_2 = arcpy.sa.Con(savi, lai_1, 6, "VALUE < 0.687")
#assigns LAI for SAVI <= 0.1
lai = arcpy.sa.Con(savi, lai_2, 0, "VALUE >= 0.1")
#Narrow Band Emissivity
remap = 0.97 + (0.0033 * lai)
nbe = arcpy.sa.Con(lai, remap, 0.98, "VALUE <= 3")
#Get the radiance mult/add bands for bands 10 and 11
Ml = getattr(meta, "RADIANCE_MULT_BAND_{0}".format(band_num))
Al = getattr(meta, "RADIANCE_ADD_BAND_{0}".format(band_num))
#Set values in the TIRS band tiffs to null
null = arcpy.sa.SetNull(band6, band6, "VALUE <= 1")
#Initial Thermal Radiances
itr = (null * Ml) + Al
#Corrected Thermal Radiances
ctr = ((itr - path_rad)/nbt) - ((1 - nbe) * sky_rad)
#Calculate surface temperature
st = (K2/(arcpy.sa.Ln(((nbe * K1)/ctr) + 1)))
#Create output name and save the surface temperature tiff
if outdir:
outdir = os.path.abspath(outdir)
outname = core.create_outname(outdir, tilename, "Surf_Temp", "tif")
else:
folder = os.path.split(band3_toa)[0]
outname = core.create_outname(folder, tilename, "Surf_Temp", "tif")
st.save(outname)
return outname