def main():
plate1 = [((0.0, 0.0), (1.0, 0.0))]
ref_point = (0.5, -0.5)
surf_temp1 = 300.0
plate2 = [((0.0, 1.0), (1.0, 1.0))]
ref_point2 = (0.5, 1.5)
surf_temp2 = 300.0
# creating surface
surf_group = SurfaceGroup()
surf_group.add_new_group(plate1, ref_point, surf_temp1)
surf_group.add_new_group(plate2, ref_point2, surf_temp2)
inlet = [((0.0, 0.0), (0.0, 1.0))]
outlet = [((1.0, 0.0), (1.0, 1.0))]
zero_grad = [((0.0, 0.0), (1.0, 0.0)), ((0.0, 1.0), (1.0, 1.0))]
center = (0.5, 0.5)
length = 1.0
width = 1.0
volume = 1.0
domain = Domain(volume, inlet, zero_grad, outlet)
# ensemble_sample = 10
time_av_sample = 10000
dof = 3.0
mass = 66.3e-27
viscosity_coeff = 2.117
viscosity_index = 0.81
mole_fraction = [0.5, 0.5]
dia = 4.17e-10
mach = [3.0, 0.0, 0.0]
temperature = 300.0
ref_temperature = 273.0
number_density = 1.699e20
gamma = 5.0 / 3.0
n_particles_in_cell = 8
ref_point = (0.1, 0.5)
argon = Molecules(
dia, viscosity_index, mass, viscosity_coeff, dof, 0, ref_temperature, gamma, volume, number_density
)
argon1 = Molecules(
dia, viscosity_index, mass, viscosity_coeff, dof, 1, ref_temperature, gamma, volume, number_density
)
gas = Gas([argon, argon1], mole_fraction, mach, temperature)
gas.setup()
# dl = min(gas.mean_f_path)
# dt = min(gas.mean_col_time)
dt = 1.0e-7
# print dt
# cell_x, cell_y = np.ceil(length / dl), np.ceil(width / dl)
cell_x, cell_y = 200, 200
cells = RectCells(cell_x, cell_y, length, width, center, 2)
start_time = time()
solver = DsmcSolver(
cells,
gas,
domain,
surf_group,
n_particles_in_cell,
dt,
time_av_sample,
CollisionDetector,
VhsCollider,
Diffuse,
ignore_frac=0.5,
)
solver.run()
end_time = time()
simulation_time = end_time - start_time
print "simulation time in mins (upper bound) = ", int(round(simulation_time / 60))
print "simulation time in sec = ", simulation_time
number_density_0 = solver.get_2d_num_den(cell_x, cell_y, 0)
number_density_1 = solver.get_2d_num_den(cell_x, cell_y, 1)
temperature = solver.get_2d_temperature(cell_x, cell_y)
speed = solver.get_2d_speed(cell_x, cell_y)
u = solver.get_2d_u(cell_x, cell_y)
v = solver.get_2d_v(cell_x, cell_y)
w = solver.get_2d_w(cell_x, cell_y)
pressure = (number_density_0 + number_density_1) * 1.3806488e-23 * temperature
f = open("poise_super_temperature.txt", "w")
np.savetxt(f, temperature)
f.close()
f = open("poise_super_number_density_0.txt", "w")
np.savetxt(f, number_density_0)
f.close()
f = open("poise_super_number_density_1.txt", "w")
np.savetxt(f, number_density_1)
f.close()
f = open("poise_super_speed.txt", "w")
np.savetxt(f, speed)
f.close()
f = open("poise_super_u.txt", "w")
np.savetxt(f, u)
f.close()
f.close()
f = open("poise_super_v.txt", "w")
np.savetxt(f, v)
f.close()
f = open("poise_super_w.txt", "w")
np.savetxt(f, w)
f.close()
f = open("poise_super_pressure.txt", "w")
np.savetxt(f, pressure)
f.close()
def main():
surface = [((0.0, 1.0), (0.0, 0.0)), ((0.0, 0.0), (1.0, 0.0)),
((1.0, 0.0), (1.0, 1.0)), ((1.0, 1.0), (0.0, 1.0))]
center = (0.5, 0.5)
length = 1.0
width = 1.0
volume = 1.0
domain = Domain(volume)
surf_group = SurfaceGroup()
surf_group.add_new_group(surface, center)
time_av_sample = 10000
dof = 3.0
mass = 66.3e-27
viscosity_coeff = 2.117
viscosity_index = 0.81
mole_fraction = [0.5, 0.5]
dia = 4.17e-10
mach = [0.0, 0.0, 0.0]
temperature = 300.0
ref_temperature = 273.0
number_density = 5e18
gamma = 5.0 / 3.0
n_particles_in_cell = 8
argon = Molecules(dia, viscosity_index, mass, viscosity_coeff, dof, 0,
ref_temperature, gamma, volume, number_density)
argon1 = Molecules(dia, viscosity_index, mass, viscosity_coeff, dof, 1,
ref_temperature, gamma, volume, number_density)
gas = Gas([argon, argon1], mole_fraction, mach, temperature)
gas.setup()
# dl = min(gas.mean_f_path)
# dt = min(gas.mean_col_time)
dt = 1.0e-5
# print dt
# cell_x, cell_y = np.ceil(length / dl), np.ceil(width / dl)
cell_x, cell_y = 200, 200
cells = RectCells(cell_x, cell_y, length, width, center, 2)
start_time = time()
solver = DsmcSolver(cells, gas, domain, surf_group, n_particles_in_cell,
dt, time_av_sample, CollisionDetector,
VhsCollider, Specular, ignore_frac=0.1)
solver.run()
end_time = time()
simulation_time = end_time - start_time
print "simulation time in mins (upper bound) = ", round(simulation_time / 60)
print "simulation time in sec = ", simulation_time
number_density_0 = solver.get_2d_num_den(cell_x, cell_y, 0)
number_density_1 = solver.get_2d_num_den(cell_x, cell_y, 1)
temperature = solver.get_2d_temperature(cell_x, cell_y)
mach = solver.get_2d_mach(cell_x, cell_y)
pressure = (number_density_0 + number_density_1) * 1.3806488e-23 * temperature
f = open('box_temperature.txt', 'w')
np.savetxt(f, temperature)
f.close()
f = open('box_number_density_0.txt', 'w')
np.savetxt(f, number_density_0)
f.close()
f = open('box_number_density_1.txt', 'w')
np.savetxt(f, number_density_1)
f.close()
f = open('box_mach.txt', 'w')
np.savetxt(f, mach)
f.close()
f = open('box_pressure.txt', 'w')
np.savetxt(f, pressure)
f.close()
def main():
wedge = [((0.39, 0.0), (1.0, 0.3464))]
ref_point = (1.0, 0.0)
surf_temp1 = 1000.0
wedge2 = [((0.39, 1.0), (1.0, 0.6536))]
ref_point2 = (1.0, 1.0)
surf_temp2 = 1000.0
# creating surface
surf_group = SurfaceGroup()
surf_group.add_new_group(wedge, ref_point, surf_temp1)
surf_group.add_new_group(wedge2, ref_point2, surf_temp2)
inlet = [((0.0, 0.0), (0.0, 1.0))]
outlet = [((1.0, 0.3464), (1.0, 0.6536))]
zero_grad = [((0.0, 0.0), (0.39, 0.0)), ((0.39, 0.0), (1.0, 0.3464)),
((0.0, 1.0), (0.39, 1.0)), ((0.39, 1.0), (1.0, 0.6536))]
center = (0.5, 0.5)
length = 1.0
width = 1.0
volume = 0.36
domain = Domain(volume, inlet, zero_grad, outlet)
sample_size = 10
dof = 3.0
mass = 66.3e-27
viscosity_coeff = 2.117
viscosity_index = 0.81
mole_fraction = [0.5, 0.5]
dia = 4.17e-10
mach = [5.0, 0.0, 0.0]
temperature = 300.0
ref_temperature = 273.0
number_density = 1.699e19
gamma = 5.0 / 3.0
n_particles_in_cell = 10
ref_point = (0.1, 0.5)
argon = Molecules(dia, viscosity_index, mass, viscosity_coeff, dof, 0,
ref_temperature, gamma, volume, number_density)
argon1 = Molecules(dia, viscosity_index, mass, viscosity_coeff, dof, 1,
ref_temperature, gamma, volume, number_density)
gas = Gas([argon, argon1], mole_fraction, mach, temperature)
gas.setup()
# dl = min(gas.mean_f_path)
# dt = min(gas.mean_col_time)
dt = 1.0e-5
# print dt
# cell_x, cell_y = np.ceil(length / dl), np.ceil(width / dl)
cell_x, cell_y = 10, 10
cells = RectCells(cell_x, cell_y, length, width, center, 2)
start_time = time()
solver = DsmcSolver(cells, gas, domain, surf_group, n_particles_in_cell,
ref_point, dt, sample_size, CollisionDetector,
VhsCollider, Diffuse)
solver.run()
end_time = time()
simulation_time = end_time - start_time
print "simulation time in mins (upper bound) = ", int(simulation_time / 60) + 1
print "simulation time in sec = ", simulation_time
number_density = solver.get_2d_num_den(cell_x, cell_y)
temperature = solver.get_2d_temperature(cell_x, cell_y)
f = open('nozzle_temperature.txt', 'w')
np.savetxt(f, temperature)
f.close()
f = open('nozzle_number_density.txt', 'w')
np.savetxt(f, number_density)
f.close()
def main():
surface1 = [((0.0, 1.0), (0.0, 0.0)), ((0.0, 0.0), (1.0, 0.0)), ((1.0, 0.0), (1.0, 1.0))]
surface1_temp = 300.0
surface2 = [((1.0, 1.0), (0.0, 1.0))]
surface2_temp = 500.0
center = (0.5, 0.5)
length = 1.0
width = 1.0
volume = 1.0
# ensemble_sample = 10
sample_size = 10
dof = 3.0
mass = 66.3e-27
viscosity_coeff = 2.117
viscosity_index = 0.81
mole_fraction = [0.5, 0.5]
dia = 4.17e-10
mach = [0.0, 0.0, 0.0]
temperature = 500.0
ref_temperature = 273.0
number_density = 1.699e19
gamma = 5.0 / 3.0
n_particles_in_cell = 10
ref_point = (0.1, 0.5)
argon = Molecules(dia, viscosity_index, mass, viscosity_coeff, dof, 0,
ref_temperature, gamma, volume, number_density)
argon1 = Molecules(dia, viscosity_index, mass, viscosity_coeff, dof, 1,
ref_temperature, gamma, volume, number_density)
gas = Gas([argon, argon1], mole_fraction, mach, temperature)
gas.setup()
domain = Domain(volume)
surf_group = SurfaceGroup()
surf_group.add_new_group(surface1, center, surface1_temp)
surf_group.add_new_group(surface2, center, surface2_temp)
dt = 1.0e-5
cell_x, cell_y = 5, 5
cells = RectCells(cell_x, cell_y, length, width, center, 2)
start_time = time()
solver = DsmcSolver(cells, gas, domain, surf_group, n_particles_in_cell,
ref_point, dt, sample_size, CollisionDetector,
VhsCollider, Diffuse)
solver.run()
end_time = time()
simulation_time = end_time - start_time
print "simulation time in mins (upper bound) = ", int(simulation_time / 60) + 1
print "simulation time in sec = ", simulation_time
number_density = solver.get_2d_num_den(10, 10)
print "number_density = ", number_density
temperature = solver.get_2d_temperature(10, 10)
print "temperature = ", temperature
f = open('box_temp_grad_temperature.txt', 'w')
np.savetxt(f, temperature)
f.close()
f = open('box_temp_grad_number_density.txt', 'w')
np.savetxt(f, number_density)
f.close()