def anaMcNiCuKa(spc, det, stdBase, maxCh=1200):
props=spc.getProperties()
e0 = props.getNumericProperty(epq.SpectrumProperties.BeamEnergy)
lt = props.getNumericProperty(epq.SpectrumProperties.LiveTime)
pc = props.getNumericProperty(epq.SpectrumProperties.FaradayBegin)
wkDst = props.getNumericProperty(epq.SpectrumProperties.WorkingDistance)
spc = jmg.cropSpec(spc, end=maxCh)
unSpc = jmg.updateCommonSpecProps(spc, det, liveTime=lt, probeCur=pc, e0=e0, wrkDist=wkDst)
dt2.display(unSpc)
# define the transitions I want to measure
tsNiKa = epq.XRayTransitionSet(epq.Element.Ni, epq.XRayTransitionSet.K_FAMILY)
tsCuKa = epq.XRayTransitionSet(epq.Element.Cu, epq.XRayTransitionSet.K_FAMILY)
trs = [tsNiKa, tsCuKa]
relStd = "/%gkV/" % (e0)
stdDir = stdBase + relStd
niFile = stdDir + "Ni-sim.msa"
cuFile = stdDir + "Cu-sim.msa"
spc = dt2.wrap(ept.SpectrumFile.open(niFile)[0])
props=spc.getProperties()
e0 = props.getNumericProperty(epq.SpectrumProperties.BeamEnergy)
lt = props.getNumericProperty(epq.SpectrumProperties.LiveTime)
pc = props.getNumericProperty(epq.SpectrumProperties.FaradayBegin)
wkDst = props.getNumericWithDefault(epq.SpectrumProperties.WorkingDistance, wkDst)
spc = jmg.cropSpec(spc, end=maxCh)
niSpc = jmg.updateCommonSpecProps(spc, det, liveTime=lt, probeCur=pc, e0=e0, wrkDist=wkDst)
dt2.display(niSpc)
spc = dt2.wrap(ept.SpectrumFile.open(cuFile)[0])
props=spc.getProperties()
e0 = props.getNumericProperty(epq.SpectrumProperties.BeamEnergy)
lt = props.getNumericProperty(epq.SpectrumProperties.LiveTime)
pc = props.getNumericProperty(epq.SpectrumProperties.FaradayBegin)
wkDst = props.getNumericWithDefault(epq.SpectrumProperties.WorkingDistance, wkDst)
spc = jmg.cropSpec(spc, end=maxCh)
cuSpc = jmg.updateCommonSpecProps(spc, det, liveTime=lt, probeCur=pc, e0=e0, wrkDist=wkDst)
dt2.display(cuSpc)
niStd = {"El":dt2.element("Ni"), "Spc":niSpc}
cuStd = {"El":dt2.element("Cu"), "Spc":cuSpc}
stds = [niStd, cuStd]
theKR = jmg.compKRs(unSpc, stds, trs, det, e0)
krNiCalc = theKR[0]
krCuCalc = theKR[1]
return [krNiCalc, krCuCalc]
msaDir = git + "/OSImageAnalysis/dtsa2/msa/"
sDet = "FEI FIB620 EDAX-RTEM"
det = findDetector(sDet)
pc = 1.0
wrkDist = 17.2 # mm
vkV = [15]
end = 2048
for e0 in vkV:
cuFil = spcDir + "Cu-%g-1.spc" % e0
raw = readSpectrum(cuFil, i=0, det=det)
lt = raw.liveTime()
print("raw channel count:")
print(raw.getChannelCount())
cuStdSpc = jmg.cropSpec(raw, start=0, end=end)
props = cuStdSpc.getProperties()
props.setDetector(det)
props.setTextProperty(epq.SpectrumProperties.SpecimenName, "Cu Grid")
props.setNumericProperty(epq.SpectrumProperties.BeamEnergy, e0)
props.setNumericProperty(epq.SpectrumProperties.WorkingDistance, wrkDist)
cuStdSpc.setLiveTime(lt)
cuStdSpc.setProbeCurrent(pc)
cuStdSpc.setAsStandard(epq.Composition(epq.Element.Cu))
cuStdSpc.rename("CuStd")
display(cuStdSpc)
# set up the standard
print("cuStdSpc channel count:")
print(cuStdSpc.getChannelCount())
display(cuStdSpc)
cuStdFil = msaDir + "Cu-%g-Std.msa" % e0
import dtsa2.jmGen as jmg
spc = wrap(s1)
cr = jmg.cropSpec(spc, end=512)
import dtsa2.jmGen as jmg
jmg.clearAllSpectra()
det = findDetector("FEI FIB620 EDAX-RTEM")
liveTim = 100 # sec
probeCur = 1 # nA
wrkDist = 17 # mm
e0 = 15 # kV
maxCh = 1200
# define the transitions I want to measure
trs = [epq.XRayTransitionSet(epq.Element.Ni, epq.XRayTransitionSet.K_FAMILY),
epq.XRayTransitionSet(epq.Element.Cu, epq.XRayTransitionSet.K_FAMILY)]
cuFil = "C:/data/eds/CuNiSpc/dtsa-sim/corBulk/15kV/CuSim.msa"
niFil = "C:/data/eds/CuNiSpc/dtsa-sim/corBulk/15kV/Ni-Sim.msa"
unFil = "C:/data/eds/CuNiSpc/dtsa-sim/StrataGemNiCu/103-nm-Ni-on-198-nm-Cu-15-kV.msa"
spc = wrap(ept.SpectrumFile.open(niFil)[0])
spc = jmg.cropSpec(spc, end=maxCh)
niSpc = jmg.updateCommonSpecProps(spc, det, liveTime=liveTim, probeCur=probeCur, e0=e0, wrkDist=wrkDist)
