def main(sysargs):
args = EasyArgs(sysargs)
cfg = EasyConfig(args.cfg, group="compare_trainer")
window_name = "EagleEye Comparator"
if "help" in args:
usage()
return 0
# grab marks from args
if len(args) > 5:
mark_in = args[4]
mark_out = args[5]
# test integer-ness
try: int(mark_in) and int(mark_out)
except:
usage()
return 1
# or grab them from a marker tool
elif len(args) > 3:
ret, mark_in, mark_out = marker_tool(args[1], 50, window_name)
if not ret:
print "Not processing - exiting."
return 1
else:
usage()
return 1
# determine sides
side = Theta.resolve(args.side or 'buttonside')
# open inouts files
vid = BuffSplitCap(args[1], buff_max=cfg.buffer_size, side=Theta.Both)
mapper_xml = Xmlset(args[2], offset=cfg.offset, offmode=Xmlset.offset_mode(cfg.offset_mode))
trainer_xml = Xmltrainer(args[3], side=side)
reprojerror_list = {} # list of reprojection error of all frames
lastframe = False
# reject mapper_xml if it doesn't contain the trainer_target
if cfg.trainer_target not in mapper_xml.data(0):
print "Mapping file must contain training target:", cfg.trainer_target
print "Target names in mapping file:", mapper_xml.data(0)
print "Please specifiy correct target name in config"
return 1
# also reject if it's lens data doesn't match the trainer_xml
_test_lens = mapper_xml.data(0)[cfg.trainer_target]['lens']
if (_test_lens == Theta.NonDual and side != Theta.NonDual) \
or (side != Theta.NonDual and _test_lens == Theta.NonDual):
print "Mapping file doesn't match training file"
print "map:", Theta.name(_test_lens), "trainer:", Theta.name(side)
return 1
# sync the video and xml
vid.restrict(mark_in, mark_out)
cropped_total = mark_out - mark_in
mapper_xml.setRatio(cropped_total)
# status
print "ratio at:", mapper_xml.ratio()
print "offset by:", cfg.offset, "in", cfg.offset_mode, "mode"
print ""
# open export (if specified)
if args.video_export:
in_fps = vid.get(cv2.CAP_PROP_FPS)
in_size = (int(vid.get(cv2.CAP_PROP_FRAME_WIDTH)),
int(vid.get(cv2.CAP_PROP_FRAME_HEIGHT)))
out_vid = cv2.VideoWriter(args.video_export,
cv2.VideoWriter_fourcc(*cfg.fourcc),
in_fps, vid.shape[:2])
print "exporting to:", args.video_export
else:
cv2.namedWindow(window_name)
print "interactive mode"
# main loop
while vid.isOpened():
frame = vid.frame()
reprojerror_list = compareReproj(frame, vid.at(), mapper_xml, trainer_xml, reprojerror_list, cfg)
# export or navigate
if args.video_export:
sys.stdout.write("Reading Video Frame: {} / {}\r".format(vid.at(), mark_out))
sys.stdout.flush()
out_vid.write(frame)
if vid.next():
reprojerror_list = compareReproj(frame, vid.at(), mapper_xml, trainer_xml, reprojerror_list, cfg)
mapper_xml.next()
else:
calReprojList(reprojerror_list)
print "\nend of video"
break
else:
cv2.imshow(window_name, frame)
key = cv2.waitKey(0)
showAll = False # toggle to show all training points in one frame
# controls
if key == Key.esc:
print "\nexiting."
break
elif key == Key.right:
if vid.next():
mapper_xml.next()
else:
if lastframe is False:
print "\nEnd of video"
calReprojList(reprojerror_list)
lastframe = True
elif key == Key.left:
if vid.back():
mapper_xml.back()
elif key == Key.enter:
while True:
reprojerror_list = compareReproj(frame, vid.at(), mapper_xml, trainer_xml, reprojerror_list, cfg)
cv2.imshow(window_name, frame)
if vid.next():
mapper_xml.next()
frame = vid.frame()
# break when over
else: break
calReprojList(reprojerror_list)
print "\nFast forwarded to end of video"
if args.compare_export:
print "Output to file"
writeFile(args.compare_export, reprojerror_list)
break
elif key == Key.space:
''' TODO: display all training points, may be abandoned
problems:
frame is not refreshed after imshow
if showAll is False:
displayTrainPts(frame, mark_in, mark_out, trainer_xml, cfg)
#
#except:
# print "Error in displaying training points. Exiting..."
# return 1
#
showAll = True
else:
frame, reprojerror_list = compareReproj(frame, vid.at(), mapper_xml, trainer_xml, reprojerror_list, cfg)
showAll = False
'''
pass
# clean up
vid.release()
if args.video_export:
out_vid.release()
else:
cv2.destroyAllWindows()
return 0
def main(sysargs):
args = EasyArgs(sysargs)
cfg = EasyConfig(args.cfg, group="compare")
window_name = "EagleEye Comparator"
if "help" in args:
usage()
return 0
# grab marks from args
if len(args) > 5:
mark_in = args[4]
mark_out = args[5]
# test integer-ness
try: int(mark_in) and int(mark_out)
except:
usage()
return 1
# or grab them from a marker tool
elif len(args) > 3:
ret, mark_in, mark_out = marker_tool(args[1], 50, window_name)
if not ret:
print "Not processing - exiting."
return 1
else:
usage()
return 1
# open video files
vid = BuffSplitCap(args[1], buff_max=cfg.buffer_size)
xml1 = Xmlset(args[2])
xml2 = Xmlset(args[3])
# trim the video
vid.restrict(mark_in, mark_out)
# trim the CSV
cropped_total = mark_out - mark_in
xml1.setRatio(cropped_total)
xml2.setRatio(cropped_total) # should be 1.0 (total frames should be the same as video)
print 'xml1 ratio:', xml1.ratio()
print 'xml2 ratio:', xml2.ratio()
# open export (if specified)
if 'export' in args:
in_fps = vid.get(cv2.CAP_PROP_FPS)
in_size = (int(vid.get(cv2.CAP_PROP_FRAME_WIDTH)),
int(vid.get(cv2.CAP_PROP_FRAME_HEIGHT)))
out_vid = cv2.VideoWriter(args.export,
cv2.VideoWriter_fourcc(*cfg.fourcc),
in_fps, in_size)
else:
cv2.namedWindow(window_name)
while vid.isOpened():
sys.stdout.write(vid.status() + "\r")
sys.stdout.flush()
frame = vid.frame()
# draw objects from each dataset
for name in xml1.data():
draw(frame, xml1.data()[name], cfg.xml1_colour)
for name in xml2.data():
draw(frame, xml2.data()[name], cfg.xml2_colour)
# print status to screen
displayText(frame, vid.status(), top=True)
displayText(frame, "{}: {}".format(os.path.basename(args[2]), xml1.status()), colour=cfg.xml1_colour)
displayText(frame, "{}: {}".format(os.path.basename(args[3]), xml2.status()), colour=cfg.xml2_colour)
# export or navigate
if 'export' in args:
sys.stdout.write("{}/{}\r".format(vid.at(), cropped_total))
sys.stdout.flush()
out_vid.write(frame)
if vid.next():
xml1.next()
xml2.next()
else:
print "\nend of video"
break
else:
cv2.imshow(window_name, frame)
key = cv2.waitKey(0)
# controls
if key == Key.esc:
print "\nexiting."
break
elif key == Key.right:
if vid.next():
xml1.next()
xml2.next()
elif key == Key.left:
if vid.back():
xml1.back()
xml2.back()
# clean up
vid.release()
if 'export' in args:
out_vid.release()
else:
cv2.destroyAllWindows()
return 0
def main(sysargs):
args = EasyArgs(sysargs)
cfg = EasyConfig(args.cfg, group="compare")
window_name = "EagleEye Comparator"
if "help" in args:
usage()
return 0
# grab marks from args
if len(args) > 5:
mark_in = args[4]
mark_out = args[5]
# test integer-ness
try:
int(mark_in) and int(mark_out)
except:
usage()
return 1
# or grab them from a marker tool
elif len(args) > 3:
ret, mark_in, mark_out = marker_tool(args[1], 50, window_name)
if not ret:
print "Not processing - exiting."
return 1
else:
usage()
return 1
# open video files
vid = BuffSplitCap(args[1], buff_max=cfg.buffer_size)
xml1 = Xmlset(args[2])
xml2 = Xmlset(args[3])
# trim the video
vid.restrict(mark_in, mark_out)
# trim the CSV
cropped_total = mark_out - mark_in
xml1.setRatio(cropped_total)
xml2.setRatio(cropped_total
) # should be 1.0 (total frames should be the same as video)
print 'xml1 ratio:', xml1.ratio()
print 'xml2 ratio:', xml2.ratio()
# open export (if specified)
if 'export' in args:
in_fps = vid.get(cv2.CAP_PROP_FPS)
in_size = (int(vid.get(cv2.CAP_PROP_FRAME_WIDTH)),
int(vid.get(cv2.CAP_PROP_FRAME_HEIGHT)))
out_vid = cv2.VideoWriter(args.export,
cv2.VideoWriter_fourcc(*cfg.fourcc), in_fps,
in_size)
else:
cv2.namedWindow(window_name)
while vid.isOpened():
sys.stdout.write(vid.status() + "\r")
sys.stdout.flush()
frame = vid.frame()
# draw objects from each dataset
for name in xml1.data():
draw(frame, xml1.data()[name], cfg.xml1_colour)
for name in xml2.data():
draw(frame, xml2.data()[name], cfg.xml2_colour)
# print status to screen
displayText(frame, vid.status(), top=True)
displayText(frame,
"{}: {}".format(os.path.basename(args[2]), xml1.status()),
colour=cfg.xml1_colour)
displayText(frame,
"{}: {}".format(os.path.basename(args[3]), xml2.status()),
colour=cfg.xml2_colour)
# export or navigate
if 'export' in args:
sys.stdout.write("{}/{}\r".format(vid.at(), cropped_total))
sys.stdout.flush()
out_vid.write(frame)
if vid.next():
xml1.next()
xml2.next()
else:
print "\nend of video"
break
else:
cv2.imshow(window_name, frame)
key = cv2.waitKey(0)
# controls
if key == Key.esc:
print "\nexiting."
break
elif key == Key.right:
if vid.next():
xml1.next()
xml2.next()
elif key == Key.left:
if vid.back():
xml1.back()
xml2.back()
# clean up
vid.release()
if 'export' in args:
out_vid.release()
else:
cv2.destroyAllWindows()
return 0
def main(sysargs):
args = EasyArgs(sysargs)
cfg = EasyConfig(args.cfg, group="compare_trainer")
window_name = "EagleEye Comparator"
if "help" in args:
usage()
return 0
# grab marks from args
if len(args) > 5:
mark_in = args[4]
mark_out = args[5]
# test integer-ness
try:
int(mark_in) and int(mark_out)
except:
usage()
return 1
# or grab them from a marker tool
elif len(args) > 3:
ret, mark_in, mark_out = marker_tool(args[1], 50, window_name)
if not ret:
print "Not processing - exiting."
return 1
else:
usage()
return 1
# determine sides
side = Theta.resolve(args.side or 'buttonside')
# open inouts files
vid = BuffSplitCap(args[1], buff_max=cfg.buffer_size, side=Theta.Both)
mapper_xml = Xmlset(args[2],
offset=cfg.offset,
offmode=Xmlset.offset_mode(cfg.offset_mode))
trainer_xml = Xmltrainer(args[3], side=side)
reprojerror_list = {} # list of reprojection error of all frames
lastframe = False
# reject mapper_xml if it doesn't contain the trainer_target
if cfg.trainer_target not in mapper_xml.data(0):
print "Mapping file must contain training target:", cfg.trainer_target
print "Target names in mapping file:", mapper_xml.data(0)
print "Please specifiy correct target name in config"
return 1
# also reject if it's lens data doesn't match the trainer_xml
_test_lens = mapper_xml.data(0)[cfg.trainer_target]['lens']
if (_test_lens == Theta.NonDual and side != Theta.NonDual) \
or (side != Theta.NonDual and _test_lens == Theta.NonDual):
print "Mapping file doesn't match training file"
print "map:", Theta.name(_test_lens), "trainer:", Theta.name(side)
return 1
# sync the video and xml
vid.restrict(mark_in, mark_out)
cropped_total = mark_out - mark_in
mapper_xml.setRatio(cropped_total)
# status
print "ratio at:", mapper_xml.ratio()
print "offset by:", cfg.offset, "in", cfg.offset_mode, "mode"
print ""
# open export (if specified)
if args.video_export:
in_fps = vid.get(cv2.CAP_PROP_FPS)
in_size = (int(vid.get(cv2.CAP_PROP_FRAME_WIDTH)),
int(vid.get(cv2.CAP_PROP_FRAME_HEIGHT)))
out_vid = cv2.VideoWriter(args.video_export,
cv2.VideoWriter_fourcc(*cfg.fourcc), in_fps,
vid.shape[:2])
print "exporting to:", args.video_export
else:
cv2.namedWindow(window_name)
print "interactive mode"
# main loop
while vid.isOpened():
frame = vid.frame()
reprojerror_list = compareReproj(frame, vid.at(), mapper_xml,
trainer_xml, reprojerror_list, cfg)
# export or navigate
if args.video_export:
sys.stdout.write("Reading Video Frame: {} / {}\r".format(
vid.at(), mark_out))
sys.stdout.flush()
out_vid.write(frame)
if vid.next():
reprojerror_list = compareReproj(frame, vid.at(), mapper_xml,
trainer_xml, reprojerror_list,
cfg)
mapper_xml.next()
else:
calReprojList(reprojerror_list)
print "\nend of video"
break
else:
cv2.imshow(window_name, frame)
key = cv2.waitKey(0)
showAll = False # toggle to show all training points in one frame
# controls
if key == Key.esc:
print "\nexiting."
break
elif key == Key.right:
if vid.next():
mapper_xml.next()
else:
if lastframe is False:
print "\nEnd of video"
calReprojList(reprojerror_list)
lastframe = True
elif key == Key.left:
if vid.back():
mapper_xml.back()
elif key == Key.enter:
while True:
reprojerror_list = compareReproj(frame, vid.at(),
mapper_xml, trainer_xml,
reprojerror_list, cfg)
cv2.imshow(window_name, frame)
if vid.next():
mapper_xml.next()
frame = vid.frame()
# break when over
else:
break
calReprojList(reprojerror_list)
print "\nFast forwarded to end of video"
if args.compare_export:
print "Output to file"
writeFile(args.compare_export, reprojerror_list)
break
elif key == Key.space:
''' TODO: display all training points, may be abandoned
problems:
frame is not refreshed after imshow
if showAll is False:
displayTrainPts(frame, mark_in, mark_out, trainer_xml, cfg)
#
#except:
# print "Error in displaying training points. Exiting..."
# return 1
#
showAll = True
else:
frame, reprojerror_list = compareReproj(frame, vid.at(), mapper_xml, trainer_xml, reprojerror_list, cfg)
showAll = False
'''
pass
# clean up
vid.release()
if args.video_export:
out_vid.release()
else:
cv2.destroyAllWindows()
return 0
