def simulate_beam_focusing( z_injection_plane, write_dir ):
"""
Simulate a focusing beam in the boosted frame
Parameters
----------
z_injection_plane: float or None
when this is not None, the injection through a plane is
activated.
write_dir: string
The directory where the boosted diagnostics are written.
"""
# Initialize the simulation object
sim = Simulation( Nz, zmax, Nr, rmax, Nm, dt, zmin=zmin,
gamma_boost=gamma_boost, boundaries='open',
use_cuda=use_cuda, v_comoving=v_comoving )
# Note: no macroparticles get created because we do not pass
# the density and number of particle per cell
# Remove the plasma particles
sim.ptcl = []
# Initialize the bunch, along with its space charge
add_elec_bunch_gaussian( sim, sigma_r, sigma_z, n_emit, gamma0,
sigma_gamma, Q, N, tf=(z_focus-z0)/c, zf=z_focus, boost=boost,
z_injection_plane=z_injection_plane )
# Configure the moving window
sim.set_moving_window( v=c )
# Add a field diagnostic
sim.diags = [
BackTransformedParticleDiagnostic( zmin, zmax, c, dt_snapshot_lab,
Ntot_snapshot_lab, gamma_boost, period=100, fldobject=sim.fld,
species={'bunch':sim.ptcl[0]}, comm=sim.comm, write_dir=write_dir)
]
# Run the simulation
sim.step( N_step )
def run_simulation(gamma_boost, show):
"""
Run a simulation with a relativistic electron bunch crosses a laser
Parameters
----------
gamma_boost: float
The Lorentz factor of the frame in which the simulation is carried out.
show: bool
Whether to show a plot of the angular distribution
"""
# Boosted frame
boost = BoostConverter(gamma_boost)
# The simulation timestep
diag_period = 100
N_step = 101 # Number of iterations to perform
# Calculate timestep to resolve the interaction with enough points
laser_duration_boosted, = boost.copropag_length([laser_duration],
beta_object=-1)
bunch_sigma_z_boosted, = boost.copropag_length([bunch_sigma_z],
beta_object=1)
dt = (4 * laser_duration_boosted + bunch_sigma_z_boosted / c) / N_step
# Initialize the simulation object
zmax, zmin = boost.copropag_length([zmax_lab, zmin_lab], beta_object=1.)
sim = Simulation(Nz,
zmax,
Nr,
rmax,
Nm,
dt,
p_zmin=0,
p_zmax=0,
p_rmin=0,
p_rmax=0,
p_nz=1,
p_nr=1,
p_nt=1,
n_e=1,
dens_func=None,
zmin=zmin,
boundaries='periodic',
use_cuda=use_cuda)
# Remove particles that were previously created
sim.ptcl = []
print('Initialized simulation')
# Add electron bunch (automatically converted to boosted-frame)
add_elec_bunch_gaussian(sim,
sig_r=1.e-6,
sig_z=bunch_sigma_z,
n_emit=0.,
gamma0=gamma_bunch_mean,
sig_gamma=gamma_bunch_rms,
Q=Q_bunch,
N=N_bunch,
tf=0.0,
zf=0.5 * (zmax + zmin),
boost=boost)
elec = sim.ptcl[0]
print('Initialized electron bunch')
# Add a photon species
photons = Particles(q=0,
m=0,
n=0,
Npz=1,
zmin=0,
zmax=0,
Npr=1,
rmin=0,
rmax=0,
Nptheta=1,
dt=sim.dt,
ux_m=0.,
uy_m=0.,
uz_m=0.,
ux_th=0.,
uy_th=0.,
uz_th=0.,
dens_func=None,
continuous_injection=False,
grid_shape=sim.fld.interp[0].Ez.shape,
particle_shape='linear',
use_cuda=sim.use_cuda)
sim.ptcl.append(photons)
print('Initialized photons')
# Activate Compton scattering for electrons of the bunch
elec.activate_compton(target_species=photons,
laser_energy=laser_energy,
laser_wavelength=laser_wavelength,
laser_waist=laser_waist,
laser_ctau=laser_ctau,
laser_initial_z0=laser_initial_z0,
ratio_w_electron_photon=50,
boost=boost)
print('Activated Compton')
# Add diagnostics
if write_hdf5:
sim.diags = [
ParticleDiagnostic(diag_period,
species={
'electrons': elec,
'photons': photons
},
comm=sim.comm)
]
# Get initial total momentum
initial_total_elec_px = (elec.w * elec.ux).sum() * m_e * c
initial_total_elec_py = (elec.w * elec.uy).sum() * m_e * c
initial_total_elec_pz = (elec.w * elec.uz).sum() * m_e * c
### Run the simulation
for species in sim.ptcl:
species.send_particles_to_gpu()
for i_step in range(N_step):
for species in sim.ptcl:
species.halfpush_x()
elec.handle_elementary_processes(sim.time + 0.5 * sim.dt)
for species in sim.ptcl:
species.halfpush_x()
# Increment time and run diagnostics
sim.time += sim.dt
sim.iteration += 1
for diag in sim.diags:
diag.write(sim.iteration)
# Print fraction of photons produced
if i_step % 10 == 0:
for species in sim.ptcl:
species.receive_particles_from_gpu()
simulated_frac = photons.w.sum() / elec.w.sum()
for species in sim.ptcl:
species.send_particles_to_gpu()
print( 'Iteration %d: Photon fraction per electron = %f' \
%(i_step, simulated_frac) )
for species in sim.ptcl:
species.receive_particles_from_gpu()
# Check estimation of photon fraction
check_photon_fraction(simulated_frac)
# Check conservation of momentum (is only conserved )
if elec.compton_scatterer.ratio_w_electron_photon == 1:
check_momentum_conservation(gamma_boost, photons, elec,
initial_total_elec_px,
initial_total_elec_py,
initial_total_elec_pz)
# Transform the photon momenta back into the lab frame
photon_u = 1. / photons.inv_gamma
photon_lab_pz = boost.gamma0 * (photons.uz + boost.beta0 * photon_u)
photon_lab_p = boost.gamma0 * (photon_u + boost.beta0 * photons.uz)
# Plot the scaled angle and frequency
if show:
import matplotlib.pyplot as plt
# Bin the photons on a grid in frequency and angle
freq_min = 0.5
freq_max = 1.2
N_freq = 500
gammatheta_min = 0.
gammatheta_max = 1.
N_gammatheta = 100
hist_range = [[freq_min, freq_max], [gammatheta_min, gammatheta_max]]
extent = [freq_min, freq_max, gammatheta_min, gammatheta_max]
fundamental_frequency = 4 * gamma_bunch_mean**2 * c / laser_wavelength
photon_scaled_freq = photon_lab_p * c / (h * fundamental_frequency)
gamma_theta = gamma_bunch_mean * np.arccos(
photon_lab_pz / photon_lab_p)
grid, freq_bins, gammatheta_bins = np.histogram2d(
photon_scaled_freq,
gamma_theta,
weights=photons.w,
range=hist_range,
bins=[N_freq, N_gammatheta])
# Normalize by solid angle, frequency and number of photons
dw = (freq_bins[1] - freq_bins[0]) * 2 * np.pi * fundamental_frequency
dtheta = (gammatheta_bins[1] - gammatheta_bins[0]) / gamma_bunch_mean
domega = 2. * np.pi * np.sin(
gammatheta_bins / gamma_bunch_mean) * dtheta
grid /= dw * domega[np.newaxis, 1:] * elec.w.sum()
grid = np.where(grid == 0, np.nan, grid)
plt.imshow(grid.T,
origin='lower',
extent=extent,
cmap='gist_earth',
aspect='auto',
vmax=1.8e-16)
plt.title('Particles, $d^2N/d\omega \,d\Omega$')
plt.xlabel('Scaled energy ($\omega/4\gamma^2\omega_\ell$)')
plt.ylabel(r'$\gamma \theta$')
plt.colorbar()
# Plot theory
plt.plot(1. / (1 + gammatheta_bins**2), gammatheta_bins, color='r')
plt.show()
plt.clf()
sim = Simulation(Nz,
zmax,
Nr,
rmax,
Nm,
dt,
0,
0,
0,
0,
2,
2,
4,
0.,
zmin=zmin,
n_order=n_order,
boundaries={
'z': 'open',
'r': 'reflective'
})
# Configure the moving window
sim.set_moving_window(v=c)
# Suppress the particles that were intialized by default and add the bunch
sim.ptcl = []
add_elec_bunch_gaussian(sim, sig_r, sig_z, n_emit, gamma0, sig_gamma, Q, N, tf,
zf)
# Set the diagnostics
sim.diags = [FieldDiagnostic(10, sim.fld, comm=sim.comm)]
# Perform one simulation step (essentially in order to write the diags)
sim.step(1)
def test_boosted_output(gamma_boost=10.):
"""
# TODO
Parameters
----------
gamma_boost: float
The Lorentz factor of the frame in which the simulation is carried out.
"""
# The simulation box
Nz = 500 # Number of gridpoints along z
zmax_lab = 0.e-6 # Length of the box along z (meters)
zmin_lab = -20.e-6
Nr = 10 # Number of gridpoints along r
rmax = 10.e-6 # Length of the box along r (meters)
Nm = 2 # Number of modes used
# Number of timesteps
N_steps = 500
diag_period = 20 # Period of the diagnostics in number of timesteps
dt_lab = (zmax_lab - zmin_lab) / Nz * 1. / c
T_sim_lab = N_steps * dt_lab
# Move into directory `tests`
os.chdir('./tests')
# Initialize the simulation object
sim = Simulation(
Nz,
zmax_lab,
Nr,
rmax,
Nm,
dt_lab,
0,
0, # No electrons get created because we pass p_zmin=p_zmax=0
0,
rmax,
1,
1,
4,
n_e=0,
zmin=zmin_lab,
initialize_ions=False,
gamma_boost=gamma_boost,
v_comoving=-0.9999 * c,
boundaries='open',
use_cuda=use_cuda)
sim.set_moving_window(v=c)
# Remove the electron species
sim.ptcl = []
# Add a Gaussian electron bunch
# Note: the total charge is 0 so all fields should remain 0
# throughout the simulation. As a consequence, the motion of the beam
# is a mere translation.
N_particles = 3000
add_elec_bunch_gaussian(sim,
sig_r=1.e-6,
sig_z=1.e-6,
n_emit=0.,
gamma0=100,
sig_gamma=0.,
Q=0.,
N=N_particles,
zf=0.5 * (zmax_lab + zmin_lab),
boost=BoostConverter(gamma_boost))
sim.ptcl[0].track(sim.comm)
# openPMD diagnostics
sim.diags = [
BackTransformedParticleDiagnostic(zmin_lab,
zmax_lab,
v_lab=c,
dt_snapshots_lab=T_sim_lab / 3.,
Ntot_snapshots_lab=3,
gamma_boost=gamma_boost,
period=diag_period,
fldobject=sim.fld,
species={"bunch": sim.ptcl[0]},
comm=sim.comm)
]
# Run the simulation
sim.step(N_steps)
# Check consistency of the back-transformed openPMD diagnostics:
# Make sure that all the particles were retrived by checking particle IDs
ts = OpenPMDTimeSeries('./lab_diags/hdf5/')
ref_pid = np.sort(sim.ptcl[0].tracker.id)
for iteration in ts.iterations:
pid, = ts.get_particle(['id'], iteration=iteration)
pid = np.sort(pid)
assert len(pid) == N_particles
assert np.all(ref_pid == pid)
# Remove openPMD files
shutil.rmtree('./lab_diags/')
os.chdir('../')
