def testLookupPhandle(self):
"""Test looking up a single phandle"""
dtb = fdt.FdtScan('tools/dtoc/dtoc_test_phandle.dts')
node = dtb.GetNode('/phandle-source2')
prop = node.props['clocks']
target = dtb.GetNode('/phandle-target')
self.assertEqual(target, dtb.LookupPhandle(fdt32_to_cpu(prop.value)))
def GetNode(self):
binman_dir = os.path.dirname(os.path.realpath(sys.argv[0]))
tools.PrepareOutputDir(None)
fname = fdt_util.EnsureCompiled(
os.path.join(binman_dir,('test/05_simple.dts')))
dtb = fdt.FdtScan(fname)
return dtb.GetNode('/binman/u-boot')
def _RunMicrocodeTest(self, dts_fname, nodtb_data):
data = self._DoReadFile(dts_fname, True)
# Now check the device tree has no microcode
second = data[len(nodtb_data):]
fname = tools.GetOutputFilename('test.dtb')
with open(fname, 'wb') as fd:
fd.write(second)
dtb = fdt.FdtScan(fname)
ucode = dtb.GetNode('/microcode')
self.assertTrue(ucode)
for node in ucode.subnodes:
self.assertFalse(node.props.get('data'))
fdt_len = self.GetFdtLen(second)
third = second[fdt_len:]
# Check that the microcode appears immediately after the Fdt
# This matches the concatenation of the data properties in
# the /microcode/update@xxx nodes in 34_x86_ucode.dts.
ucode_data = struct.pack('>4L', 0x12345678, 0x12345679, 0xabcd0000,
0x78235609)
self.assertEqual(ucode_data, third[:len(ucode_data)])
ucode_pos = len(nodtb_data) + fdt_len
# Check that the microcode pointer was inserted. It should match the
# expected position and size
pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
len(ucode_data))
first = data[:len(nodtb_data)]
return first, pos_and_size
def scan_dtb(self):
"""Scan the device tree to obtain a tree of nodes and properties
Once this is done, self._fdt.GetRoot() can be called to obtain the
device tree root node, and progress from there.
"""
self._fdt = fdt.FdtScan(self._dtb_fname)
def testGetPhandleList(self):
dtb = fdt.FdtScan('tools/dtoc/dtoc_test_phandle.dts')
node = dtb.GetNode('/phandle-source2')
self.assertEqual([1], fdt_util.GetPhandleList(node, 'clocks'))
node = dtb.GetNode('/phandle-source')
self.assertEqual([1, 2, 11, 3, 12, 13, 1],
fdt_util.GetPhandleList(node, 'clocks'))
self.assertEqual(None, fdt_util.GetPhandleList(node, 'missing'))
def testFdtCellsToCpu(self):
val = self.node.props['intarray'].value
self.assertEqual(0, fdt_util.fdt_cells_to_cpu(val, 0))
self.assertEqual(2, fdt_util.fdt_cells_to_cpu(val, 1))
dtb2 = fdt.FdtScan('tools/dtoc/dtoc_test_addr64.dts')
node2 = dtb2.GetNode('/test1')
val = node2.props['reg'].value
self.assertEqual(0x1234, fdt_util.fdt_cells_to_cpu(val, 2))
def _RunMicrocodeTest(self, dts_fname, nodtb_data, ucode_second=False):
"""Handle running a test for insertion of microcode
Args:
dts_fname: Name of test .dts file
nodtb_data: Data that we expect in the first section
ucode_second: True if the microsecond entry is second instead of
third
Returns:
Tuple:
Contents of first region (U-Boot or SPL)
Position and size components of microcode pointer, as inserted
in the above (two 4-byte words)
"""
data = self._DoReadFile(dts_fname, True)
# Now check the device tree has no microcode
if ucode_second:
ucode_content = data[len(nodtb_data):]
ucode_pos = len(nodtb_data)
dtb_with_ucode = ucode_content[16:]
fdt_len = self.GetFdtLen(dtb_with_ucode)
else:
dtb_with_ucode = data[len(nodtb_data):]
fdt_len = self.GetFdtLen(dtb_with_ucode)
ucode_content = dtb_with_ucode[fdt_len:]
ucode_pos = len(nodtb_data) + fdt_len
fname = tools.GetOutputFilename('test.dtb')
with open(fname, 'wb') as fd:
fd.write(dtb_with_ucode)
dtb = fdt.FdtScan(fname)
ucode = dtb.GetNode('/microcode')
self.assertTrue(ucode)
for node in ucode.subnodes:
self.assertFalse(node.props.get('data'))
# Check that the microcode appears immediately after the Fdt
# This matches the concatenation of the data properties in
# the /microcode/update@xxx nodes in 34_x86_ucode.dts.
ucode_data = struct.pack('>4L', 0x12345678, 0x12345679, 0xabcd0000,
0x78235609)
self.assertEqual(ucode_data, ucode_content[:len(ucode_data)])
# Check that the microcode pointer was inserted. It should match the
# expected position and size
pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
len(ucode_data))
u_boot = data[:len(nodtb_data)]
return u_boot, pos_and_size
def UpdateFdtContents(etype, data):
"""Update the contents of a particular device tree
The device tree is updated and written back to its file. This affects what
is returned from future called to GetFdtContents(), etc.
Args:
etype: Entry type (e.g. 'u-boot-dtb')
data: Data to replace the DTB with
"""
dtb, fname, entry = output_fdt_info[etype]
dtb_fname = dtb.GetFilename()
tools.WriteFile(dtb_fname, data)
dtb = fdt.FdtScan(dtb_fname)
output_fdt_info[etype] = [dtb, fname, entry]
def ObtainContents(self):
Entry_blob.ObtainContents(self)
# If the image does not need microcode, there is nothing to do
ucode_dest_entry = self.image.FindEntryType(
'u-boot-spl-with-ucode-ptr')
if not ucode_dest_entry or not ucode_dest_entry.target_pos:
ucode_dest_entry = self.image.FindEntryType(
'u-boot-with-ucode-ptr')
if not ucode_dest_entry or not ucode_dest_entry.target_pos:
return True
# Create a new file to hold the copied device tree
dtb_name = 'u-boot-dtb-with-ucode.dtb'
fname = tools.GetOutputFilename(dtb_name)
with open(fname, 'wb') as fd:
fd.write(self.data)
# Remove the microcode
dtb = fdt.FdtScan(fname)
ucode = dtb.GetNode('/microcode')
if not ucode:
raise self.Raise("No /microcode node found in '%s'" % fname)
# There's no need to collate it (move all microcode into one place)
# if we only have one chunk of microcode.
self.collate = len(ucode.subnodes) > 1
for node in ucode.subnodes:
data_prop = node.props.get('data')
if data_prop:
self.ucode_data += ''.join(data_prop.bytes)
if self.collate:
prop = node.DeleteProp('data')
else:
# Find the offset in the device tree of the ucode data
self.ucode_offset = data_prop.GetOffset() + 12
self.ucode_size = len(data_prop.bytes)
if self.collate:
dtb.Pack()
dtb.Flush()
# Make this file the contents of this entry
self._pathname = fname
self.ReadContents()
return True
def testPackUbootMicrocode(self):
"""Test that x86 microcode can be handled correctly
We expect to see the following in the image, in order:
u-boot-nodtb.bin with a microcode pointer inserted at the correct
place
u-boot.dtb with the microcode removed
the microcode
"""
data = self._DoReadFile('34_x86_ucode.dts', True)
# Now check the device tree has no microcode
second = data[len(U_BOOT_NODTB_DATA):]
fname = tools.GetOutputFilename('test.dtb')
with open(fname, 'wb') as fd:
fd.write(second)
dtb = fdt.FdtScan(fname)
ucode = dtb.GetNode('/microcode')
self.assertTrue(ucode)
for node in ucode.subnodes:
self.assertFalse(node.props.get('data'))
fdt_len = self.GetFdtLen(second)
third = second[fdt_len:]
# Check that the microcode appears immediately after the Fdt
# This matches the concatenation of the data properties in
# the /microcode/update@xxx nodes in x86_ucode.dts.
ucode_data = struct.pack('>4L', 0x12345678, 0x12345679, 0xabcd0000,
0x78235609)
self.assertEqual(ucode_data, third[:len(ucode_data)])
ucode_pos = len(U_BOOT_NODTB_DATA) + fdt_len
# Check that the microcode pointer was inserted. It should match the
# expected position and size
pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
len(ucode_data))
first = data[:len(U_BOOT_NODTB_DATA)]
self.assertEqual(
'nodtb with microcode' + pos_and_size + ' somewhere in here',
first)
def Prepare(images, dtb):
"""Get device tree files ready for use
This sets up a set of device tree files that can be retrieved by
GetAllFdts(). This includes U-Boot proper and any SPL device trees.
Args:
images: List of images being used
dtb: Main dtb
"""
global output_fdt_info, main_dtb, fdt_path_prefix
# Import these here in case libfdt.py is not available, in which case
# the above help option still works.
import fdt
import fdt_util
# If we are updating the DTBs we need to put these updated versions
# where Entry_blob_dtb can find them. We can ignore 'u-boot.dtb'
# since it is assumed to be the one passed in with options.dt, and
# was handled just above.
main_dtb = dtb
output_fdt_info.clear()
fdt_path_prefix = ''
output_fdt_info['u-boot-dtb'] = [dtb, 'u-boot.dtb', None]
output_fdt_info['u-boot-spl-dtb'] = [dtb, 'spl/u-boot-spl.dtb', None]
output_fdt_info['u-boot-tpl-dtb'] = [dtb, 'tpl/u-boot-tpl.dtb', None]
if not use_fake_dtb:
fdt_set = {}
for image in images.values():
fdt_set.update(image.GetFdts())
for etype, other in fdt_set.items():
entry, other_fname = other
infile = tools.GetInputFilename(other_fname)
other_fname_dtb = fdt_util.EnsureCompiled(infile)
out_fname = tools.GetOutputFilename('%s.out' %
os.path.split(other_fname)[1])
tools.WriteFile(out_fname, tools.ReadFile(other_fname_dtb))
other_dtb = fdt.FdtScan(out_fname)
output_fdt_info[etype] = [other_dtb, out_fname, entry]
def Prepare(images, dtb):
"""Get device tree files ready for use
This sets up a set of device tree files that can be retrieved by GetFdts().
At present there is only one, that for U-Boot proper.
Args:
images: List of images being used
dtb: Main dtb
"""
global fdt_set, fdt_subset, fdt_files, main_dtb
# Import these here in case libfdt.py is not available, in which case
# the above help option still works.
import fdt
import fdt_util
# If we are updating the DTBs we need to put these updated versions
# where Entry_blob_dtb can find them. We can ignore 'u-boot.dtb'
# since it is assumed to be the one passed in with options.dt, and
# was handled just above.
main_dtb = dtb
fdt_files.clear()
fdt_files['u-boot.dtb'] = dtb
fdt_subset = set()
if not use_fake_dtb:
for image in images.values():
fdt_subset.update(image.GetFdtSet())
fdt_subset.discard('u-boot.dtb')
for other_fname in fdt_subset:
infile = tools.GetInputFilename(other_fname)
other_fname_dtb = fdt_util.EnsureCompiled(infile)
out_fname = tools.GetOutputFilename('%s.out' %
os.path.split(other_fname)[1])
tools.WriteFile(out_fname, tools.ReadFile(other_fname_dtb))
other_dtb = fdt.FdtScan(out_fname)
fdt_files[other_fname] = other_dtb
def testPhandle(self):
dtb = fdt.FdtScan('tools/dtoc/dtoc_test_phandle.dts')
node = dtb.GetNode('/phandle-source2')
prop = node.props['clocks']
self.assertTrue(fdt32_to_cpu(prop.value) > 0)
def PrepareImagesAndDtbs(dtb_fname, select_images, update_fdt):
"""Prepare the images to be processed and select the device tree
This function:
- reads in the device tree
- finds and scans the binman node to create all entries
- selects which images to build
- Updates the device tress with placeholder properties for offset,
image-pos, etc.
Args:
dtb_fname: Filename of the device tree file to use (.dts or .dtb)
selected_images: List of images to output, or None for all
update_fdt: True to update the FDT wth entry offsets, etc.
"""
# Import these here in case libfdt.py is not available, in which case
# the above help option still works.
import fdt
import fdt_util
global images
# Get the device tree ready by compiling it and copying the compiled
# output into a file in our output directly. Then scan it for use
# in binman.
dtb_fname = fdt_util.EnsureCompiled(dtb_fname)
fname = tools.GetOutputFilename('u-boot.dtb.out')
tools.WriteFile(fname, tools.ReadFile(dtb_fname))
dtb = fdt.FdtScan(fname)
node = _FindBinmanNode(dtb)
if not node:
raise ValueError("Device tree '%s' does not have a 'binman' "
"node" % dtb_fname)
images = _ReadImageDesc(node)
if select_images:
skip = []
new_images = OrderedDict()
for name, image in images.items():
if name in select_images:
new_images[name] = image
else:
skip.append(name)
images = new_images
tout.Notice('Skipping images: %s' % ', '.join(skip))
state.Prepare(images, dtb)
# Prepare the device tree by making sure that any missing
# properties are added (e.g. 'pos' and 'size'). The values of these
# may not be correct yet, but we add placeholders so that the
# size of the device tree is correct. Later, in
# SetCalculatedProperties() we will insert the correct values
# without changing the device-tree size, thus ensuring that our
# entry offsets remain the same.
for image in images.values():
image.ExpandEntries()
if update_fdt:
image.AddMissingProperties()
image.ProcessFdt(dtb)
for dtb_item in state.GetAllFdts():
dtb_item.Sync(auto_resize=True)
dtb_item.Pack()
dtb_item.Flush()
return images
def Binman(options, args):
"""The main control code for binman
This assumes that help and test options have already been dealt with. It
deals with the core task of building images.
Args:
options: Command line options object
args: Command line arguments (list of strings)
"""
global images
if options.full_help:
pager = os.getenv('PAGER')
if not pager:
pager = 'more'
fname = os.path.join(os.path.dirname(os.path.realpath(sys.argv[0])),
'README')
command.Run(pager, fname)
return 0
# Try to figure out which device tree contains our image description
if options.dt:
dtb_fname = options.dt
else:
board = options.board
if not board:
raise ValueError(
'Must provide a board to process (use -b <board>)')
board_pathname = os.path.join(options.build_dir, board)
dtb_fname = os.path.join(board_pathname, 'u-boot.dtb')
if not options.indir:
options.indir = ['.']
options.indir.append(board_pathname)
try:
# Import these here in case libfdt.py is not available, in which case
# the above help option still works.
import fdt
import fdt_util
tout.Init(options.verbosity)
elf.debug = options.debug
try:
tools.SetInputDirs(options.indir)
tools.PrepareOutputDir(options.outdir, options.preserve)
SetEntryArgs(options.entry_arg)
# Get the device tree ready by compiling it and copying the compiled
# output into a file in our output directly. Then scan it for use
# in binman.
dtb_fname = fdt_util.EnsureCompiled(dtb_fname)
fname = tools.GetOutputFilename('u-boot-out.dtb')
with open(dtb_fname) as infd:
with open(fname, 'wb') as outfd:
outfd.write(infd.read())
dtb = fdt.FdtScan(fname)
# Note the file so that GetFdt() can find it
fdt_files['u-boot.dtb'] = dtb
node = _FindBinmanNode(dtb)
if not node:
raise ValueError("Device tree '%s' does not have a 'binman' "
"node" % dtb_fname)
images = _ReadImageDesc(node)
# Prepare the device tree by making sure that any missing
# properties are added (e.g. 'pos' and 'size'). The values of these
# may not be correct yet, but we add placeholders so that the
# size of the device tree is correct. Later, in
# SetCalculatedProperties() we will insert the correct values
# without changing the device-tree size, thus ensuring that our
# entry offsets remain the same.
for image in images.values():
if options.update_fdt:
image.AddMissingProperties()
image.ProcessFdt(dtb)
dtb.Pack()
dtb.Flush()
for image in images.values():
# Perform all steps for this image, including checking and
# writing it. This means that errors found with a later
# image will be reported after earlier images are already
# completed and written, but that does not seem important.
image.GetEntryContents()
image.GetEntryOffsets()
image.PackEntries()
image.CheckSize()
image.CheckEntries()
image.SetImagePos()
if options.update_fdt:
image.SetCalculatedProperties()
image.ProcessEntryContents()
image.WriteSymbols()
image.BuildImage()
if options.map:
image.WriteMap()
with open(fname, 'wb') as outfd:
outfd.write(dtb.GetContents())
finally:
tools.FinaliseOutputDir()
finally:
tout.Uninit()
return 0
def setUp(self):
self.dtb = fdt.FdtScan('tools/dtoc/dtoc_test_simple.dts')
def Binman(args):
"""The main control code for binman
This assumes that help and test options have already been dealt with. It
deals with the core task of building images.
Args:
args: Command line arguments Namespace object
"""
global images
if args.full_help:
pager = os.getenv('PAGER')
if not pager:
pager = 'more'
fname = os.path.join(os.path.dirname(os.path.realpath(sys.argv[0])),
'README')
command.Run(pager, fname)
return 0
if args.cmd == 'ls':
ListEntries(args.image, args.paths)
return 0
if args.cmd == 'extract':
try:
tools.PrepareOutputDir(None)
ExtractEntries(args.image, args.filename, args.outdir, args.paths,
not args.uncompressed)
finally:
tools.FinaliseOutputDir()
return 0
# Try to figure out which device tree contains our image description
if args.dt:
dtb_fname = args.dt
else:
board = args.board
if not board:
raise ValueError(
'Must provide a board to process (use -b <board>)')
board_pathname = os.path.join(args.build_dir, board)
dtb_fname = os.path.join(board_pathname, 'u-boot.dtb')
if not args.indir:
args.indir = ['.']
args.indir.append(board_pathname)
try:
# Import these here in case libfdt.py is not available, in which case
# the above help option still works.
import fdt
import fdt_util
tout.Init(args.verbosity)
elf.debug = args.debug
cbfs_util.VERBOSE = args.verbosity > 2
state.use_fake_dtb = args.fake_dtb
try:
tools.SetInputDirs(args.indir)
tools.PrepareOutputDir(args.outdir, args.preserve)
tools.SetToolPaths(args.toolpath)
state.SetEntryArgs(args.entry_arg)
# Get the device tree ready by compiling it and copying the compiled
# output into a file in our output directly. Then scan it for use
# in binman.
dtb_fname = fdt_util.EnsureCompiled(dtb_fname)
fname = tools.GetOutputFilename('u-boot.dtb.out')
tools.WriteFile(fname, tools.ReadFile(dtb_fname))
dtb = fdt.FdtScan(fname)
node = _FindBinmanNode(dtb)
if not node:
raise ValueError("Device tree '%s' does not have a 'binman' "
"node" % dtb_fname)
images = _ReadImageDesc(node)
if args.image:
skip = []
new_images = OrderedDict()
for name, image in images.items():
if name in args.image:
new_images[name] = image
else:
skip.append(name)
images = new_images
if skip and args.verbosity >= 2:
print('Skipping images: %s' % ', '.join(skip))
state.Prepare(images, dtb)
# Prepare the device tree by making sure that any missing
# properties are added (e.g. 'pos' and 'size'). The values of these
# may not be correct yet, but we add placeholders so that the
# size of the device tree is correct. Later, in
# SetCalculatedProperties() we will insert the correct values
# without changing the device-tree size, thus ensuring that our
# entry offsets remain the same.
for image in images.values():
image.ExpandEntries()
if args.update_fdt:
image.AddMissingProperties()
image.ProcessFdt(dtb)
for dtb_item in state.GetFdts():
dtb_item.Sync(auto_resize=True)
dtb_item.Pack()
dtb_item.Flush()
for image in images.values():
# Perform all steps for this image, including checking and
# writing it. This means that errors found with a later
# image will be reported after earlier images are already
# completed and written, but that does not seem important.
image.GetEntryContents()
image.GetEntryOffsets()
# We need to pack the entries to figure out where everything
# should be placed. This sets the offset/size of each entry.
# However, after packing we call ProcessEntryContents() which
# may result in an entry changing size. In that case we need to
# do another pass. Since the device tree often contains the
# final offset/size information we try to make space for this in
# AddMissingProperties() above. However, if the device is
# compressed we cannot know this compressed size in advance,
# since changing an offset from 0x100 to 0x104 (for example) can
# alter the compressed size of the device tree. So we need a
# third pass for this.
passes = 3
for pack_pass in range(passes):
try:
image.PackEntries()
image.CheckSize()
image.CheckEntries()
except Exception as e:
if args.map:
fname = image.WriteMap()
print("Wrote map file '%s' to show errors" % fname)
raise
image.SetImagePos()
if args.update_fdt:
image.SetCalculatedProperties()
for dtb_item in state.GetFdts():
dtb_item.Sync()
sizes_ok = image.ProcessEntryContents()
if sizes_ok:
break
image.ResetForPack()
if not sizes_ok:
image.Raise(
'Entries expanded after packing (tried %s passes)' %
passes)
image.WriteSymbols()
image.BuildImage()
if args.map:
image.WriteMap()
# Write the updated FDTs to our output files
for dtb_item in state.GetFdts():
tools.WriteFile(dtb_item._fname, dtb_item.GetContents())
finally:
tools.FinaliseOutputDir()
finally:
tout.Uninit()
return 0
def setUp(self):
self.dtb = fdt.FdtScan('tools/dtoc/dtoc_test_simple.dts')
self.node = self.dtb.GetNode('/spl-test')
def Binman(options, args):
"""The main control code for binman
This assumes that help and test options have already been dealt with. It
deals with the core task of building images.
Args:
options: Command line options object
args: Command line arguments (list of strings)
"""
global images
if options.full_help:
pager = os.getenv('PAGER')
if not pager:
pager = 'more'
fname = os.path.join(os.path.dirname(os.path.realpath(sys.argv[0])),
'README')
command.Run(pager, fname)
return 0
# Try to figure out which device tree contains our image description
if options.dt:
dtb_fname = options.dt
else:
board = options.board
if not board:
raise ValueError(
'Must provide a board to process (use -b <board>)')
board_pathname = os.path.join(options.build_dir, board)
dtb_fname = os.path.join(board_pathname, 'u-boot.dtb')
if not options.indir:
options.indir = ['.']
options.indir.append(board_pathname)
try:
tout.Init(options.verbosity)
elf.debug = options.debug
try:
tools.SetInputDirs(options.indir)
tools.PrepareOutputDir(options.outdir, options.preserve)
dtb = fdt.FdtScan(dtb_fname)
node = _FindBinmanNode(dtb)
if not node:
raise ValueError("Device tree '%s' does not have a 'binman' "
"node" % dtb_fname)
images = _ReadImageDesc(node)
for image in images.values():
# Perform all steps for this image, including checking and
# writing it. This means that errors found with a later
# image will be reported after earlier images are already
# completed and written, but that does not seem important.
image.GetEntryContents()
image.GetEntryPositions()
image.PackEntries()
image.CheckSize()
image.CheckEntries()
image.ProcessEntryContents()
image.WriteSymbols()
image.BuildImage()
if options.map:
image.WriteMap()
finally:
tools.FinaliseOutputDir()
finally:
tout.Uninit()
return 0
