def runCMDtoCOMPort(ser, runcmds):
global newCon
global logFileP
global testResult
if (ser == None):
print("Please check console port if open")
return None
else:
#print('Enter console commands after >>\r\nEnter "quit" to leave program.')
logFileP = foxfile.isLogfileOpen()
#check bootmode terminator
terminator = getTerminator()
try:
for i in range(len(runcmds)):
ss = runcmds[i]
cmdstr = ""
for j in range(len(ss)):
cmdstr = cmdstr + ss[j] + " "
ser.flushInput()
ser.flushOutput()
sys.stdin.flush()
sys.stdout.flush()
#print(cmdstr)
if cmdstr == "" or cmdstr == " ":
cmdstr = '\r\n'
else:
cmdstr = cmdstr + '\n'
ser.write(cmdstr.encode())
out = ""
ser.timeout = 10
data = ser.read_until(terminator.encode())
out += data.decode()
print(out[len(cmdstr):], end="")
if (out.find("FAIL") > -1) or (out.find("FAILED") > -1):
testResult.append([cmdstr[:-2], "FAIL"])
elif (out.find("PASS") > -1) or (out.find("PASSED") > -1):
testResult.append([cmdstr[:-2], "PASS"])
else:
testResult.append([cmdstr[:-2], " "])
#Save log file
if (logFileP != None):
foxfile.writelogtofile(">>" + out)
if (newCon != None):
toConsole(newCon, out)
except KeyboardInterrupt:
print("Press Keyboard Interrupt (CTRL+C)")
except:
print("(runCMDtoCOMPort) Error to communicating serial port ")
def command(con, flag, str_=""):
global newCon
global logFileP
try:
logFileP = foxfile.isLogfileOpen()
con.write(str_.encode() + b"\n")
data = con.read_until(flag.encode(), timeout=10)
#if(log_lvl == 1):
print(data.decode(errors='ignore')[len(str_):], end="")
#Display output message to another console
if (newCon != None):
toConsole(newCon, data.decode(errors='ignore'))
#save log to file
if (logFileP != None):
foxfile.writelogtofile(data.decode(errors='ignore'))
except KeyboardInterrupt:
print("Press Keyboard Interrupt (CTRL+C)")
except:
print("function command error")
return data
def console_cmd(con, flag, str_=""):
global newCon
global logFileP
global testResult
try:
logFileP = foxfile.isLogfileOpen()
if (con == None):
print("Please check console port if open")
return None
#print(str_)
con.write(str_.encode() + b"\n")
data = con.read_until(flag.encode(), timeout=60)
print(data.decode(errors='ignore'), end="")
out = ""
out = out + data.decode()
if out.find("FAIL") > -1:
testResult.append([str_, "FAIL"])
elif out.find("PASS") > -1:
testResult.append([str_, "PASS"])
else:
testResult.append([str_, " "])
#save log to file
if (logFileP != None):
foxfile.writelogtofile(data.decode(errors='ignore'))
#return data
if (newCon != None):
toConsole(newCon, data.decode(errors='ignore'))
except KeyboardInterrupt:
print("Press Keyboard Interrupt (CTRL+C)")
except:
print("console_cmd error")
def readMoreData(ser, match, out):
global newCon
global logFileP
try:
if ser == None or match == None:
print("read More data is None")
return True
elif len(out) <= 0 or out == " ":
return True
else:
i = out.find(match)
if i > -1:
ser.write("\x20".encode())
out = ""
time.sleep(2)
while ser.inWaiting() > 0:
data = ser.read(1)
out = out + data.decode()
print("Console>>" + out)
#Save log File
if (logFileP != None):
foxfile.writelogtofile("Console>>" + out)
if (newCon != None):
toConsole(newCon, out)
readMoreData(ser, match, out)
else:
out = ""
return True
except:
print("Read more console output data error")
def runCMDtoLinuxShell(ser, runcmds):
global diagprompt
global linuxshell
global logFileP
firstime = True
if (ser == None):
print("Please check com port if open")
return None
else:
logFileP = foxfile.isLogfileOpen()
try:
if (firstime == True):
firstime = False
ss = "linux_shell" + '\n'
ser.timeout = 3
ser.write(ss.encode())
out = ""
out = ser.read_until(linuxshell.encode())
print(out.decode(), end="")
for i in range(len(runcmds)):
ss = runcmds[i]
ss = ss + '\n'
ser.flushInput()
ser.flushOutput()
sys.stdin.flush()
sys.stdout.flush()
ser.write(ss.encode())
out = ""
ser.timeout = 30
if (ss[0:4] == "exit"):
out = ser.read_until(diagprompt.encode())
print(out.decode(), end="")
break
else:
out = ser.read_until(linuxshell.encode())
print(out.decode(), end="")
#Save log file
if (logFileP != None) and (out.decode() != ""):
foxfile.writelogtofile(linuxshell + out.decode())
if (ss[0:4] == "exit"):
print("Got linux shell command is exit.")
#Save log file
if (logFileP != None) and (out.decode() != ""):
foxfile.writelogtofile(linuxshell + out.decode())
else:
#read if lastest cmd succeed
if (len(out) > 0):
ss = "exit" + "\n"
ser.timeout = 5
ser.write(ss.encode())
out = ""
out = ser.read_until(diagprompt.encode())
print(out.decode(), end="")
else:
ss = "\n"
ser.timeout = 2
ser.write(ss.encode())
out = ""
out = ser.read_until(linuxshell.encode())
print(out.decode(), end="")
except KeyboardInterrupt:
print("Press Keyboard Interrupt (CTRL+C)")
except:
print("error communicating serial port (runCMDtoLinuxShell) ")
def runEmphasisCMDtoBCMShell(ser, runcmds):
global diagprompt
global bcmshell
global logFileP
firstime = True
if (ser == None):
print("Please check com port if open")
return None
else:
logFileP = foxfile.isLogfileOpen()
try:
ser.flushInput()
ser.flushOutput()
sys.stdin.flush()
sys.stdout.flush()
if (firstime == True):
firstime = False
ss = "bcm_shell" + '\n'
ser.timeout = 30
ser.write(ss.encode())
out = ""
out = ser.read_until(bcmshell.encode())
print(out.decode(), end="")
for i in range(len(runcmds)):
ss = runcmds[i]
ss = ss + '\n'
print(ss)
ser.flushInput()
ser.flushOutput()
sys.stdin.flush()
sys.stdout.flush()
ser.write(ss.encode())
out = ""
ser.timeout = 60
if (ss[0:4] == "exit"):
out = ser.read_until(diagprompt.encode())
print(out.decode()[len(ss):], end="")
break
else:
out = ser.read_until(bcmshell.encode())
print(out.decode()[len(ss):], end="")
#Save log file
if (logFileP != None) and (out.decode() != ""):
foxfile.writelogtofile(bcmshell + out.decode())
time.sleep(1)
#If bcmshell cmd is "exit", then return to DIAG> already
if (ss[0:4] == "exit"):
print("Got bcmshell command is exit. ")
#Save log file
if (logFileP != None) and (out.decode() != ""):
foxfile.writelogtofile(bcmshell + out.decode())
else:
#always exit bcmshell
ss = "exit" + "\n"
ser.timeout = 10
ser.write(ss.encode())
out = ""
out = ser.read_until(diagprompt.encode())
print(out.decode(), end="")
#Save log file
if (logFileP != None) and (out.decode() != ""):
foxfile.writelogtofile(out.decode())
except KeyboardInterrupt:
print("Press Keyboard Interrupt (CTRL+C)")
except:
print(
"error communicating serial port (runEmphasisCMDtoBCMShell) ")
def runCMDtoCOMPortPrompt(ser, runcmds, prompt):
global newCon
global logFileP
global testResult
global iosprompt
bcmshellcmd = False
linuxshellcmd = False
if (ser == None):
print("Please check console port if open")
return None
else:
logFileP = foxfile.isLogfileOpen()
try:
ser.flushInput()
ser.flushOutput()
sys.stdin.flush()
sys.stdout.flush()
if prompt == iosprompt:
ss = '\r\n'
ser.write(ss.encode())
out = ""
ser.timeout = 5
out = ser.read_until(iosprompt.encode())
if out.decode() == "":
ss = '\r\n'
ser.write(ss.encode())
out = ""
ser.timeout = 5
out = ser.read_until(iosen.encode())
print(out.decode(), end="")
ser.write("en\n".encode())
out = ser.read_until(iosprompt.encode())
print(out.decode(), end="")
else:
print(out.decode(), end="")
for i in range(len(runcmds)):
ss = runcmds[i]
cmdstr = ""
linuxshellcmd = bcmshellcmd = False
for j in range(len(ss)):
if j == 0:
if ss[0] == bcmshell:
bcmshellcmd = True
continue
elif ss[0][-1:] == linuxshell:
linuxshellcmd = True
continue
else:
cmdstr = cmdstr + ss[j] + " "
else:
cmdstr = cmdstr + ss[j] + " "
#Check if testcmd is a bcmshell or linuxshell command
#call sub function
if bcmshellcmd == True:
#print(cmdstr)
runEmphasisCMDtoBCMShell(ser, [cmdstr])
testResult.append([cmdstr[:-2], " "])
continue
elif linuxshellcmd == True:
#print(cmdstr)
runCMDtoLinuxShell(ser, [cmdstr])
testResult.append([cmdstr[:-2], " "])
continue
print(prompt, cmdstr)
ser.flushInput()
ser.flushOutput()
sys.stdin.flush()
sys.stdout.flush()
if cmdstr == "" or cmdstr == " ":
cmdstr = '\r\n'
else:
cmdstr = cmdstr + '\n'
ser.write(cmdstr.encode())
out = ""
ser.timeout = 60
data = ser.read_until(prompt.encode())
out += data.decode()
print(out[len(cmdstr):-(len(prompt))])
if out.find("FAIL") > -1:
testResult.append([cmdstr[:-2], "FAIL"])
elif out.find("PASS") > -1:
testResult.append([cmdstr[:-2], "PASS"])
else:
testResult.append([cmdstr[:-2], " "])
#Save log file
if (logFileP != None):
foxfile.writelogtofile(out)
if (newCon != None):
toConsole(newCon, out)
#print("Closed runCMDtoCOMPort")
except KeyboardInterrupt:
print("Press Keyboard Interrupt (CTRL+C)")
except:
print("error communicating serial port ")
def runTestCmdToCOMPort(ser, testcmds, terminator, wait_time, option):
global logFileP
global testResult
ret = None
if (ser == None):
print("Please check com port if open")
return None
else:
logFileP = foxfile.isLogfileOpen()
try:
sys.stdin.flush()
sys.stdout.flush()
ser.flushInput()
ser.flushOutput()
for i in range(len(testcmds)):
testcmd = testcmds[i]
if (len(testcmd) == 0):
testcmd = "\n"
return ret
else:
testcmd = testcmd + '\n'
print(testcmd)
ser.write(testcmd.encode())
out = ""
ser.timeout = wait_time
data = ser.read_until(terminator.encode())
out += data.decode()
print(out[len(testcmd):], end="")
if (out == ""):
print("runTestCmdToCOMPort is timeout!")
ret = "Timeout"
if (logFileP != None) and (len(out) > 0):
foxfile.writelogtofile(terminator + out)
tempidx = -1
if testcmd.find("linespeed") > -1:
tempidx = out.find("100 %")
# Add temperature result
if (tempidx > -1):
#print(out[tempidx+10:tempidx+14])
if (out.find("FAIL") > -1) or (out.find("FAILED") > -1):
testResult.append([
testcmd[:-1],
str(option), out[tempidx + 10:tempidx + 15], "FAIL"
])
elif (out.find("PASS") > -1) or (out.find("PASSED") > -1):
testResult.append([
testcmd[:-1],
str(option), out[tempidx + 10:tempidx + 15], "PASS"
])
else:
testResult.append(
[testcmd[:-1],
str(option), " ", " "])
else:
if (out.find("FAIL") > -1) or (out.find("FAILED") > -1):
testResult.append([testcmd[:-1], str(option), "FAIL"])
elif (out.find("PASS") > -1) or (out.find("PASSED") > -1):
testResult.append([testcmd[:-1], str(option), "PASS"])
else:
testResult.append(
[testcmd[:-1], str(option), " "])
except KeyboardInterrupt:
print("Press Keyboard Interrupt (CTRL+C)")
except:
print("error communicating serial port (runTestCmdToCOMPort)")
return ret
def consoleToCOMPort(ser):
global matchMore
global newCon
global logFileP
global timeout
global diagprompt
global iosen
global iosprompt
global rommonprompt
global bcmshell
firsttime = False
#check bootmode terminator
terminator = getTerminator()
if (ser == None):
print("Please check console port if open")
return None
else:
print('Enter any commands after {0}\r\nEnter "quit" to leave program.'.
format(terminator))
logFileP = foxfile.isLogfileOpen()
try:
while True:
ser.flushInput()
ser.flushOutput()
sys.stdin.flush()
sys.stdout.flush()
if (firsttime == False):
s = input(terminator)
firsttime = True
else:
s = input("")
if s == "quit":
print("quit console program")
break
else:
if s == "" or s == " ":
s = '\n'
else:
s = s + '\n'
ser.write(s.encode())
out = ""
ser.timeout = 10
data = ser.read_until(terminator.encode())
out += data.decode()
print(out[len(s):], end="")
#Save log file
if (logFileP != None):
foxfile.writelogtofile(">>" + out)
if (newCon != None):
toConsole(newCon, out)
#read more data if match "--More--"
#readMoreData(ser, matchMore, out)
except KeyboardInterrupt:
print("Press Keyboard Interrupt (CTRL+C)")
except:
print("error communicating serial port ")
def showTestResult(showstr, heads, verbose):
global testResult
global logFileP
total_pass = 0
total_fail = 0
out = "\n"
logFileP = foxfile.isLogfileOpen()
#print("\n*********************************************************")
#out += "\n*********************************************************\n"
if (showstr == ""):
print("\nShow autotest run all result ")
out += "Show autotest run all result\n"
else:
print("\n" + showstr)
out += showstr + "\n"
resban = "===================="
s = 0
for res in testResult:
s = len(res)
resban = s * resban
out += resban + "\n"
break
print(resban)
#Show result tilte
if (heads != "") and len(heads) > 0:
for i, head in enumerate(heads):
if i == 0:
print("{0:35}".format(head), end="")
out += "{0:35}".format(head)
elif i == 1:
print("{0:30}".format(head), end="")
out += "{0:30}".format(head)
else:
print("{0:10}".format(head), end="")
out += "{0:10}".format(head)
subban = "--------------------"
subban *= s
print("\n" + subban)
out += "\n" + subban + "\n"
for res in testResult:
s = len(res)
if res[s - 1] == "PASS":
total_pass += 1
elif res[s - 1] == "FAIL":
total_fail += 1
else:
pass
#else:se
# continue
for i in range(len(res)):
if i == 0:
if len(res[i]) > 35:
print("{0:55}".format(res[i]), end="")
out += "{0:55}".format(res[i])
else:
print("{0:35}".format(res[i]), end="")
out += "{0:35}".format(res[i])
elif i == 1:
print("{0:30}".format(res[i]), end="")
out += "{0:30}".format(res[i])
else:
print("{0:10}".format(res[i]), end="")
out += "{0:10}".format(res[i])
print("")
out += "\n"
print(resban)
out += "\n" + resban + "\n"
print("Total of PASSED {0:4}, FAILED {1:4}".format(total_pass, total_fail))
out += "Total of PASSED {0:4}, FAILED {1:4}\n".format(
total_pass, total_fail)
#print("*********************************************************")
#out += "*********************************************************\n"
#Save log file
if (logFileP != None):
foxfile.writelogtofile(out)
if (verbose == "en"):
print("Debug test result for detail")
for res in testResult:
print(res)
testResult = []