def test_uncfg(self):
Genie.testbed = testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='nxos')
with self.assertNoWarnings():
Genie.testbed = None
with self.assertRaises(TypeError):
vlan = Vlan()
Genie.testbed = testbed
vlan = Vlan(vlan='102')
vlan.device_attr[dev1].vlan_attr['102'].name = 'vlan2'
vlan.device_attr[dev1].vlan_attr['102'].state = 'active'
vlan.device_attr[dev1].vlan_attr['102'].mode = 'ce'
self.assertIs(vlan.testbed, testbed)
dev1.add_feature(vlan)
cfgs = vlan.build_unconfig(apply=False)
self.assertCountEqual(cfgs.keys(), [dev1.name])
self.assertMultiLineEqual(str(cfgs[dev1.name]), '\n'.join([
'no vlan 102',
]))
def test_basic_uncfg(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='iosxe')
dev2 = Device(testbed=testbed, name='PE2', os='iosxe')
intf1 = Interface(name='GigabitEthernet0/0/1',device=dev1)
intf1.switchport = True
intf2 = Interface(name='GigabitEthernet0/0/2',device=dev2)
intf3 = Interface(name='Vlan100',device=dev1)
vlan = Vlan()
vlan.device_attr[dev1].vlan_id = 100
vlan.device_attr[dev2].vlan_id = 300
access_map_id = 'ed'
vlan_configuration_id = '3'
vlan.device_attr[dev1]
vlan.device_attr[dev2]
vlan.device_attr[dev1].interface_attr[intf1].switchport_mode = \
'trunk'
vlan.device_attr[dev1].interface_attr[intf1].sw_trunk_allowed_vlan = \
'200-201'
vlan.device_attr[dev1].access_map_attr[access_map_id]
vlan.device_attr[dev2].access_map_attr[access_map_id]
vlan.device_attr[dev1].vlan_configuration_attr[vlan_configuration_id]
vlan.device_attr[dev2].vlan_configuration_attr[vlan_configuration_id]
# Defining attributes section
with self.assertRaises(ValueError):
vlan.media = 'invalid'
vlan.media = 'enet'
self.assertIs(type(vlan.media), Vlan.Media)
vlan.accounting_type = 'input'
vlan.device_attr[dev1].access_map_action = 'drop'
# Unconfig testing
# Set a mock
dev1.configure = Mock()
dev2.configure = Mock()
dev1.add_feature(vlan)
dev2.add_feature(vlan)
# Mock config
uncfg1 = vlan.build_unconfig(apply=False)
self.assertCountEqual(uncfg1.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(uncfg1['PE1']),
'\n'.join([
'no vlan 100',
'no vlan accounting input',
'no vlan access-map ed',
'no vlan configuration 3',
'interface GigabitEthernet0/0/1',
' no switchport mode trunk',
' no switchport trunk allowed vlan 200-201',
' exit',
]))
self.assertMultiLineEqual(
str(uncfg1['PE2']),
'\n'.join([
'no vlan 300',
'no vlan accounting input',
'no vlan access-map ed',
'no vlan configuration 3',
]))
uncfg_intf = intf1.build_unconfig(apply=False, attributes="switchport")
self.assertMultiLineEqual(
str(uncfg_intf),
'\n'.join([
'interface GigabitEthernet0/0/1',
' no switchport',
' exit',
]))
partial_uncfg1 = vlan.build_unconfig(apply=False,
attributes={'device_attr':\
{'*':"media"}})
self.assertCountEqual(partial_uncfg1.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(partial_uncfg1['PE1']),
'\n'.join([
'vlan 100',
' no media enet',
' exit',
]))
partial_unconfigure = vlan.build_unconfig(apply=False,
attributes={'device_attr':\
{'*':{'access_map_attr':\
{'*':"access_map_action"}}}})
self.assertCountEqual(partial_unconfigure.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(partial_unconfigure['PE1']),
'\n'.join([
'vlan access-map ed',
' no action drop',
' exit',
]))
all_vlan_interface_uncfg = vlan.build_unconfig(apply=False,
attributes={'device_attr':\
{'*':{'interface_attr':'*'}}})
self.assertCountEqual(all_vlan_interface_uncfg.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(all_vlan_interface_uncfg['PE1']),
'\n'.join([
'interface GigabitEthernet0/0/1',
' no switchport mode trunk',
' no switchport trunk allowed vlan 200-201',
' exit',
]))
partial_vlan_interface_uncfg = vlan.build_unconfig(apply=False,
attributes={'device_attr':\
{'*':{'interface_attr':\
{'*':"sw_trunk_allowed_vlan"}}}})
self.assertCountEqual(partial_vlan_interface_uncfg.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(partial_vlan_interface_uncfg['PE1']),
'\n'.join([
'interface GigabitEthernet0/0/1',
' no switchport trunk allowed vlan 200-201',
' exit',
]))
def test_basic_uncfg(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='nxos', context='yang')
dev2 = Device(testbed=testbed, name='PE2', os='nxos', context='yang')
intf1 = Interface(name='Ethernet0/0/1', device=dev1)
intf2 = Interface(name='Ethernet0/0/2', device=dev2)
vlan = Vlan()
for dev in testbed.devices:
dev.connections = Mock()
dev.connections = {'netconf': NetconfConnectionInfo()}
vlan.device_attr[dev1].vlan_id = 100
vlan.device_attr[dev2].vlan_id = 300
# Unconfig testing
# Set a mock
dev1.configure = Mock()
dev2.configure = Mock()
dev1.add_feature(vlan)
dev2.add_feature(vlan)
# Mock config
uncfg1 = vlan.build_unconfig(apply=False)
self.assertCountEqual(uncfg1.keys(), ['PE1', 'PE2'])
compare = ""
for i in uncfg1['PE1']:
compare += str(i)
self.assertMultiLineEqual(
compare, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <vlan xmlns="http://cisco.com/ns/yang/ned/ios">\n'
' <vlan-list>\n'
' <id>100</id>\n'
' </vlan-list>\n'
' </vlan>\n'
' </config>\n'
'</edit-config>\n'
]))
compare = ""
for i in uncfg1['PE2']:
compare += str(i)
self.assertMultiLineEqual(
compare, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <vlan xmlns="http://cisco.com/ns/yang/ned/ios">\n'
' <vlan-list>\n'
' <id>300</id>\n'
' </vlan-list>\n'
' </vlan>\n'
' </config>\n'
'</edit-config>\n'
]))
def test_enable_disable(self):
# For failures
self.maxDiff = None
# Set testbed
Genie.testbed = testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='nxos')
# Create Vlan object
vlan1 = Vlan()
dev1.add_feature(vlan1)
vlan1.device_attr[dev1].enabled = True
# Check config strings built correctly
cfgs = vlan1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfgs[dev1.name]),
'\n'.join([
'feature interface-vlan',
'feature vn-segment-vlan-based',
]))
# Unconfigure
uncfgs = vlan1.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfgs[dev1.name]),
'\n'.join([
'no feature interface-vlan',
'no feature vn-segment-vlan-based',
]))
dev1.remove_feature(vlan1)
# Create Vlan object
vlan2 = Vlan()
dev1.add_feature(vlan2)
vlan2.device_attr[dev1].enabled_interface_vlan = True
# Check config strings built correctly
cfgs = vlan2.build_config(apply=False)
self.assertMultiLineEqual(
str(cfgs[dev1.name]),
'\n'.join([
'feature interface-vlan',
]))
# Unconfigure
uncfgs = vlan2.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfgs[dev1.name]),
'\n'.join([
'no feature interface-vlan',
]))
# Remove feature
dev1.remove_feature(vlan2)
# Create Vlan object
vlan3 = Vlan()
dev1.add_feature(vlan3)
vlan3.device_attr[dev1].enabled_vn_segment_vlan_based = True
# Build config
cfgs = vlan3.build_config(apply=False)
self.assertMultiLineEqual(
str(cfgs[dev1.name]),
'\n'.join([
'feature vn-segment-vlan-based',
]))
# Unconfigure
uncfgs = vlan3.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfgs[dev1.name]),
'\n'.join([
'no feature vn-segment-vlan-based',
]))
def test_cfg_with_igmp(self):
Genie.testbed = testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='nxos')
with self.assertNoWarnings():
Genie.testbed = None
with self.assertRaises(TypeError):
vlan = Vlan()
Genie.testbed = testbed
vlan = Vlan(vlan='102')
vlan.device_attr[dev1].vlan_attr['102'].name = 'vlan2'
vlan.device_attr[dev1].vlan_attr['102'].state = 'active'
vlan.device_attr[dev1].vlan_attr['102'].mode = 'ce'
vlan.device_attr[dev1].config_vlan_attr['102'].config_vlan_id = '102'
vlan.device_attr[dev1].config_vlan_attr['102'].ip_igmp_snooping = True
self.assertIs(vlan.testbed, testbed)
dev1.add_feature(vlan)
cfgs = vlan.build_config(apply=False)
self.assertCountEqual(cfgs.keys(), [dev1.name])
self.assertMultiLineEqual(str(cfgs[dev1.name]), '\n'.join([
'vlan 102',
' name vlan2',
' state active',
' mode ce',
' exit',
'vlan configuration 102',
' ip igmp snooping',
' exit'
]))
un_cfgs = vlan.build_unconfig(apply=False)
self.assertMultiLineEqual(str(un_cfgs[dev1.name]), '\n'.join([
'no vlan 102',
'no vlan configuration 102',
]))
un_cfgs = vlan.build_unconfig(apply=False,
attributes={'device_attr': {
dev1: {
'vlan_attr': {
'102': {"mode": None}
},
'config_vlan_attr': {
'102': {"ip_igmp_snooping": None}
}
}
}
})
self.assertCountEqual(un_cfgs.keys(), [dev1.name])
self.assertMultiLineEqual(str(un_cfgs[dev1.name]), '\n'.join([
'vlan 102',
' no mode ce',
' exit',
'vlan configuration 102',
' no ip igmp snooping',
' exit',
]))
def test_cfg_with_args(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='nxos')
dev2 = Device(testbed=testbed, name='PE2', os='nxos')
intf1 = Interface(name='Ethernet0/0/1', device=dev1, layer=Layer.L3)
intf2 = Interface(name='Ethernet0/0/2', device=dev2, layer=Layer.L2)
link = Link(name='1_2_1', testbed=testbed)
link.connect_interface(interface=intf1)
link.connect_interface(interface=intf2)
vlan = Vlan(vlan_id=100)
link.add_feature(vlan)
access_map_id = 'ed'
vlan_configuration_id = '3'
vlan.device_attr[dev1]
vlan.device_attr[dev2]
vlan.device_attr[dev1].interface_attr[intf1]
vlan.device_attr[dev2].interface_attr[intf2]
vlan.device_attr[dev2].interface_attr[intf2].switchport_mode = \
L2_type.TRUNK
vlan.device_attr[dev2].interface_attr[intf2].sw_trunk_allowed_vlan = \
'200-201'
vlan.device_attr[dev1].access_map_attr[access_map_id]
vlan.device_attr[dev2].access_map_attr[access_map_id]
vlan.device_attr[dev1].vlan_configuration_attr[vlan_configuration_id]
vlan.device_attr[dev2].vlan_configuration_attr[vlan_configuration_id]
# Defining attributes section
vlan.shutdown = False
with self.assertRaises(ValueError):
vlan.media = 'invalid'
vlan.media = 'enet'
self.assertIs(type(vlan.media), Vlan.Media)
vlan.egress_load_balance = True
vlan.device_attr[dev1].access_map_action = 'drop'
vlan.datalink_flow_monitor = True
intf1.ipv4 = '201.0.12.1'
intf1.ipv4.netmask = '255.255.255.0'
intf1.speed = 1000
intf1.mtu = 500
intf1.ipv6 = '2001::12:1'
cfg1 = vlan.build_config(apply=False)
cfg2 = intf1.build_config(apply=False)
self.assertCountEqual(cfg1.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(cfg1['PE1']),
'\n'.join([
'vlan 100',
' media enet',
' no shutdown',
' exit',
'vlan access-map ed',
' action drop',
' exit',
'vlan configuration 3',
' egress port-channel load-balance random',
' exit',
'interface Ethernet0/0/1',
' mtu 500',
' ip address 201.0.12.1 255.255.255.0',
' ipv6 address 2001::12:1/128',
' speed 1000',
' exit',
]))
self.assertMultiLineEqual(
str(cfg1['PE2']),
'\n'.join([
'vlan 100',
' media enet',
' no shutdown',
' exit',
'vlan access-map ed',
' exit',
'vlan configuration 3',
' egress port-channel load-balance random',
' exit',
'interface Ethernet0/0/2',
' switchport mode trunk',
' switchport trunk allowed vlan 200-201',
' exit',
]))
self.assertMultiLineEqual(
str(cfg2),
'\n'.join([
'interface Ethernet0/0/1',
' mtu 500',
' ip address 201.0.12.1 255.255.255.0',
' ipv6 address 2001::12:1/128',
' speed 1000',
' exit',
]))
uncfg = vlan.build_unconfig(apply=False, attributes={'device_attr': {
dev1: {
'shutdown': None}
}})
self.assertMultiLineEqual(
str(uncfg['PE1']),
'\n'.join([
'vlan 100',
' shutdown',
' exit',
]))
def test_basic_uncfg(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='nxos')
dev2 = Device(testbed=testbed, name='PE2', os='nxos')
intf1 = Interface(name='Ethernet0/0/1', device=dev1, layer=Layer.L3)
intf2 = Interface(name='Ethernet0/0/2', device=dev2, layer=Layer.L2)
link = Link(name='1_2_1', testbed=testbed)
link.connect_interface(interface=intf1)
link.connect_interface(interface=intf2)
vlan = Vlan()
link.add_feature(vlan)
vlan.vlan_id = 100
access_map_id = 'ed'
vlan_configuration_id = '3'
vlan.device_attr[dev1]
vlan.device_attr[dev2]
vlan.device_attr[dev1].access_map_attr[access_map_id]
vlan.device_attr[dev2].access_map_attr[access_map_id]
vlan.device_attr[dev1].interface_attr[intf1]
vlan.device_attr[dev2].interface_attr[intf2]
vlan.device_attr[dev2].interface_attr[intf2].switchport_mode = \
L2_type.TRUNK
vlan.device_attr[dev2].interface_attr[intf2].sw_trunk_allowed_vlan = \
'200-201'
vlan.device_attr[dev1].vlan_configuration_attr[vlan_configuration_id]
vlan.device_attr[dev2].vlan_configuration_attr[vlan_configuration_id]
# Defining attributes section
vlan.shutdown = False
with self.assertRaises(ValueError):
vlan.media = 'invalid'
vlan.media = 'enet'
self.assertIs(type(vlan.media), Vlan.Media)
vlan.egress_port_channel_load_balance_random = True
vlan.device_attr[dev1].access_map_action = 'drop'
vlan.datalink_flow_monitor = True
# Unconfig testing
# Set a mock
dev1.cli = Mock()
dev1.configure = Mock()
dev2.cli = Mock()
dev2.configure = Mock()
dev1.add_feature(vlan)
dev2.add_feature(vlan)
# Mock config
output = vlan.build_config(apply=True)
uncfg1 = vlan.build_unconfig(apply=False)
self.assertCountEqual(uncfg1.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(uncfg1['PE1']),
'\n'.join([
'no vlan 100',
'no vlan access-map ed',
'no vlan configuration 3',
]))
self.assertMultiLineEqual(
str(uncfg1['PE2']),
'\n'.join([
'no vlan 100',
'no vlan access-map ed',
'no vlan configuration 3',
'interface Ethernet0/0/2',
' no switchport mode trunk',
' no switchport trunk allowed vlan 200-201',
' exit',
]))
partial_uncfg1 = vlan.build_unconfig(apply=False,
attributes={'device_attr': \
{'*': "media"}})
self.assertCountEqual(partial_uncfg1.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(partial_uncfg1['PE1']),
'\n'.join([
'vlan 100',
' no media enet',
' exit',
]))
partial_unconfigure = vlan.build_unconfig(apply=False,
attributes={'device_attr': \
{'*': {'access_map_attr': \
{'*': "access_map_action"}}}})
self.assertCountEqual(partial_unconfigure.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(partial_unconfigure['PE1']),
'\n'.join([
'vlan access-map ed',
' no action drop',
' exit',
]))
all_vlan_interface_uncfg = vlan.build_unconfig(apply=False,
attributes={ \
'device_attr': {'*': { \
'interface_attr': '*'}}})
self.assertCountEqual(all_vlan_interface_uncfg.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(all_vlan_interface_uncfg['PE2']),
'\n'.join([
'interface Ethernet0/0/2',
' no switchport mode trunk',
' no switchport trunk allowed vlan 200-201',
' exit',
]))
partial_vlan_interface_uncfg = vlan.build_unconfig(apply=False,
attributes={ \
'device_attr': {'*': \
{'interface_attr': \
{
'*': "sw_trunk_allowed_vlan"}}}})
self.assertCountEqual(partial_vlan_interface_uncfg.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(partial_vlan_interface_uncfg['PE2']),
'\n'.join([
'interface Ethernet0/0/2',
' no switchport trunk allowed vlan 200-201',
' exit',
]))
def test_basic_uncfg(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='iosxr')
dev2 = Device(testbed=testbed, name='PE2', os='iosxr')
intf1 = Interface(name='GigabitEthernet0/0/1', device=dev1)
intf2 = Interface(name='GigabitEthernet0/0/2', device=dev2)
intf3 = Interface(name='GigabitEthernet0/0/3', device=dev1)
link = Link(name='1_2_1', testbed=testbed)
link.connect_interface(interface=intf1)
link.connect_interface(interface=intf2)
vlan = Vlan()
link.add_feature(vlan)
# Defining attributes section
vlan.device_attr[dev1]
vlan.device_attr[dev2]
vlan.device_attr[dev1].interface_attr[intf1]
vlan.device_attr[dev1].interface_attr[intf1].eth_encap_type1 = 'dot1q'
vlan.device_attr[dev1].interface_attr[intf1].eth_encap_val1 = 2
vlan.device_attr[dev1].interface_attr[
intf1].eth_encap_type2 = 'second-dot1q'
vlan.device_attr[dev1].interface_attr[intf1].eth_encap_val2 = 5
# Unconfig testing
# Set a mock
dev1.cli = Mock()
dev1.configure = Mock()
dev2.cli = Mock()
dev2.configure = Mock()
dev1.add_feature(vlan)
dev2.add_feature(vlan)
# Mock config
output = vlan.build_config(apply=True)
uncfg = vlan.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg['PE1']), '\n'.join([
'interface GigabitEthernet0/0/1',
' no encapsulation dot1q 2 second-dot1q 5',
' exit',
]))
all_vlan_interface_uncfg = vlan.build_unconfig(apply=False,
attributes={'device_attr':\
{'*':{'interface_attr':'*'}}})
self.assertCountEqual(all_vlan_interface_uncfg.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(all_vlan_interface_uncfg['PE1']), '\n'.join([
'interface GigabitEthernet0/0/1',
' no encapsulation dot1q 2 second-dot1q 5',
' exit',
]))
partial_vlan_interface_uncfg = vlan.build_unconfig(apply=False,
attributes={'device_attr':\
{'*':{'interface_attr':\
{'*':"eth_encap_type1"}}}})
self.assertCountEqual(partial_vlan_interface_uncfg.keys(),
['PE1', 'PE2'])
self.assertMultiLineEqual(
str(partial_vlan_interface_uncfg['PE1']), '\n'.join([
'interface GigabitEthernet0/0/1',
' no encapsulation dot1q 2 second-dot1q 5',
' exit',
]))
def test_basic_uncfg(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='iosxe', context='yang')
dev2 = Device(testbed=testbed, name='PE2', os='iosxe', context='yang')
intf1 = Interface(name='GigabitEthernet0/0/1', device=dev1)
intf2 = Interface(name='GigabitEthernet0/0/2', device=dev2)
intf3 = Interface(name='Vlan100', device=dev1)
vlan = Vlan()
for dev in testbed.devices:
dev.connections = Mock()
dev.connections = {'netconf': NetconfConnectionInfo()}
vlan.device_attr[dev1].vlan_id = 100
vlan.device_attr[dev2].vlan_id = 300
# Unconfig testing
# Set a mock
dev1.configure = Mock()
dev2.configure = Mock()
dev1.add_feature(vlan)
dev2.add_feature(vlan)
# Mock config
uncfg1 = vlan.build_unconfig(apply=False)
self.assertCountEqual(uncfg1.keys(), ['PE1', 'PE2'])
compare = ""
for i in uncfg1['PE1']:
compare += str(i)
# A case has been already raised by JB so the unconfig for yang works as expected.
# Currently, retruned xml for yang unconfig is exactly the same for the unconfig one.
self.assertMultiLineEqual(
compare, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <vlan xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <vlan-list xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-vlan">\n'
' <id>100</id>\n'
' </vlan-list>\n'
' </vlan>\n'
' </config>\n'
'</edit-config>\n'
]))
compare = ""
for i in uncfg1['PE2']:
compare += str(i)
self.assertMultiLineEqual(
compare, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <vlan xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <vlan-list xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-vlan">\n'
' <id>300</id>\n'
' </vlan-list>\n'
' </vlan>\n'
' </config>\n'
'</edit-config>\n'
]))
new_vlan = Vlan(vlan_id="3001", name="GenieConfigured") # Add new vlan to device as a feature device.add_feature(new_vlan) new_vlan.devices # Build the configuration for the vlan, but don't send to device output = new_vlan.build_config(apply=False) output print(output["sbx-n9kv-ao"]) # Build and send the configuration to devices output = new_vlan.build_config(apply=True) # Build and print out the configuraiton to REMOVE the Vlan from the devices output = new_vlan.build_unconfig(apply=False) print(output["sbx-n9kv-ao"]) # Build and send the configuration to remove the Vlan from the device output = new_vlan.build_unconfig() # Create a new Interface object for the device new_interface = Interface(name="Ethernet1/10", device=device) # Configure interface properties new_interface.description = "Genie set me!" new_interface.enabled = False new_interface.switchport_enable = True new_interface.switchport_mode = "trunk" new_interface.native_vlan = "101" new_interface.trunk_vlans = "101-105"