def getJustMembranePdb(inputFileName, outputFileName):
pdbBarriers = pdb.pdbData(inputFileName)
#get the barriers read in and defined
barrierAtomList = [[], []]
for index, resName in enumerate(pdbBarriers.resNames):
if resName == "DUM":
if pdbBarriers.atoms[index][0] == "O":
barrierAtomList[0].append(pdbBarriers.coords[index])
elif pdbBarriers.atoms[index][0] == "N":
barrierAtomList[1].append(pdbBarriers.coords[index])
barrierZ = [barrierAtomList[0][0][2], barrierAtomList[1][0][2]]
barrierZ.sort()
barrierSep = geometry.distL2(barrierAtomList[0][0], barrierAtomList[1][0])
zCoord = barrierZ[1]
goodResChain = []
for index, thisResNum in enumerate(pdbBarriers.resNums):
chain = pdbBarriers.chains[index]
resChain = str(thisResNum) + str(chain)
if resChain not in goodResChain:
#otherwise don't need to check, already in
zTest = pdbBarriers.coords[index][2]
if abs(zTest) <= zCoord:
goodResChain.append(resChain)
newPdb = pdbBarriers.getListResiduesChains(goodResChain)
newPdb.write(outputFileName)
def pathLength(path):
'''computes the total length from point to point'''
length = 0
lastPathPt = path[0][1:4] # init for loop
for nextPathPtRad in path[1:]:
nextPathPt = nextPathPtRad[1:4]
length += geometry.distL2(nextPathPt, lastPathPt)
lastPathPt = nextPathPt
return length
def getResiduesBetweenPoints(pair, pdbD):
'''a pair of nodes, finds center and radius, returns residues within'''
aXYZ = pair[0].getXYZ()
bXYZ = pair[1].getXYZ()
radius = geometry.distL2(aXYZ, bXYZ)/2.
pointRad = [radius]
for index in range(3):
pointRad.append((aXYZ[index]+bXYZ[index])/2.)
resList = getNearbyResidues([pointRad], pdbD)
return resList
def tstTravelSurfInsideOld(tstFileName, phiFileName=False):
'''does the old algorithm of just computing the shortest distance to any
surface point from any atom by going through both lists the hard way'''
tstD = tstdata.tstData(tstFileName) # read the file into the data structure
#do the biggest disjoint set of tris/points stuff
allPoints, allTris, cavPoints, cavTris = cavity.assumeNoCavities(
tstD.dict['POINT_XYZ'], tstD.dict['TRIANGLE_POINT'],
tstD.dict['POINT_NEIGHBOR'])
pointXyz = tstD.dict['POINT_XYZ']
pdbD = pdb.pdbData()
for line in tstD.dict['PDB_RECORD']:
pdbD.processLine(line)
atomTravelInDepths = []
for coord in pdbD.coords:
minDist = geometry.distL2(coord, pointXyz[allPoints[0]-1][1:])
#set to first
for point in allPoints[1:]:
thisDist = geometry.distL2(coord, pointXyz[point-1][1:])
minDist = min(minDist, thisDist)
atomTravelInDepths.append(minDist)
#make a pdb file with the bfactor replaced
for index, atomTID in enumerate(atomTravelInDepths):
pdbD.updateFactors(index, (pdbD.factors[index][0], atomTID))
pdbD.write(tstFileName+".old.atomdepth.pdb")
#also add record to tstdata
atomTIDRecord = []
for index, atomTID in enumerate(atomTravelInDepths):
atomTIDRecord.append([index+1, atomTID])
tstD.dict['ATOM_DEPTH_OLD'] = atomTIDRecord
#write data into tst file
tstFile = open(tstFileName, 'a')
tstFile.write("ATOM_TRAVEL_IN\n")
for line in tstD.dict['ATOM_DEPTH_OLD']:
lineOut = "%8d" % line[0]
for count in xrange(1, len(line)):
lineOut += "%+9.4f " % line[count]
noPlusLine = string.replace(lineOut, "+", " ")
tstFile.write(noPlusLine)
tstFile.write("\n")
tstFile.write("END ATOM_DEPTH_OLD\n")
tstFile.close()
def getAllAdjacentBoxesOnce(curBox, lenX, lenY, lenZ, extraEdges=False):
# when called on all curBoxes, only returns each pair once
returnVec = getAllAdjacentBoxes(curBox, lenX, lenY, lenZ)
# add distance info
newReturnVec = []
for box in returnVec:
newReturnVec.append((box, geometry.distL2(curBox, box)))
if extraEdges and curBox in extraEdges:
for adjBox, adjDist, adjGridDist in extraEdges[curBox]: # tuple unpack
newReturnVec.append((adjBox, adjDist))
newVec = [box for box in newReturnVec if curBox[0:2] <= box[0][0:2]]
return newVec
def tstEdgeCurvature(trianglePoint, pointXyz, pointTriangle, pointNeighbor):
'''for each edge, calculate the angle between the triangles around it.
calculate point curvature based on average of these for each point'''
triXyz = {}
for triPtList in trianglePoint:
tri = triPtList[0]
xyz = []
for pt in triPtList[1:]:
xyz.append(pointXyz[pt-1][1:])
triXyz[tri] = xyz
edgeAngle = {} # store edge angles as they are found so don't duplicate work
pointMeanAngle = [] # once all edges found, find mean, store in tst format
pointWeightedMeanAngle = [] # weight by edge length
for pointNeighborList in pointNeighbor:
mainPt = pointNeighborList[0]
angles = []
weightedAngles = []
for otherPt in pointNeighborList[2:]: # pN[1] is count
ptList = [mainPt, otherPt]
ptList.sort()
ptTuple = tuple(ptList) # canonicalized format
edgeLength = geometry.distL2(
pointXyz[mainPt-1][1:], pointXyz[otherPt-1][1:])
if ptTuple in edgeAngle: # already done
angles.append(edgeAngle[ptTuple])
weightedAngles.append(edgeAngle[ptTuple] * edgeLength)
else: # have to compute it
mainTris = set(pointTriangle[mainPt-1][2:])
otherTris = set(pointTriangle[otherPt-1][2:])
tris = list(mainTris.intersection(otherTris))
#will almost always be 2
#for now assume only 2
normalA = geometry.getTriNormalList(triXyz[tris[0]])
normalB = geometry.getTriNormalList(triXyz[tris[1]])
unsignedAngle = geometry.getAngle(normalA, normalB) # unsigned
centerTriA = geometry.getAverage(triXyz[tris[0]])
planeA = geometry.calculatePlaneD(normalA, centerTriA)
ptsB = set(trianglePoint[tris[1]-1][1:])
edgePts = set(ptList)
otherB = pointXyz[list(ptsB.difference(edgePts))[0]-1][1:]
side = geometry.checkPlaneSide(normalA+[planeA], otherB)
if side:
angle = - unsignedAngle * 180 / math.pi # concave negative
else:
angle = unsignedAngle * 180 / math.pi # convex positive
edgeAngle[ptTuple] = angle
angles.append(angle)
weightedAngles.append(angle*edgeLength)
pointMeanAngle.append([mainPt, statistics.computeMean(angles)])
pointWeightedMeanAngle.append(
[mainPt, statistics.computeMean(weightedAngles)])
return edgeAngle, pointMeanAngle, pointWeightedMeanAngle
def checkPath(path, loopPointsList, pointXYZ, xyzStart=1):
'''checks to see if the path intersects any topological loop on the surf'''
pathThrough = False, False # return a tuple... false is for failure
for loopPts in loopPointsList:
triangles = tstdata.trianglinizeLoop(loopPts)
numberIntersects = 0
#do intersection checks... carefully
for triangle in triangles:
lastPathPt = path[0][xyzStart:xyzStart + 3] # init for loop
for nextPathPtRad in path[1:]:
nextPathPt = nextPathPtRad[xyzStart:xyzStart+3]
triPts0 = pointXYZ[triangle[0]-1][1:]
triPts1 = pointXYZ[triangle[1]-1][1:]
triPts2 = pointXYZ[triangle[2]-1][1:]
posPt, maxIt = False, 5000
while False == posPt:
posPt = geometry.linePlaneIntersectionNumeric(
triPts0, triPts1, triPts2, lastPathPt, nextPathPt)
if False == posPt:
triPts0, triPts1, triPts2 = geometry.perturbTriangle(
triPts0, triPts1, triPts2)
maxIt -= 1
if maxIt < 0:
print "had to perturb points 5000 times", triPts0, triPts1,
print triPts2, lastPathPt, nextPathPt, "giving up"
sys.exit(1)
if posPt is not False:
if geometry.distL2(lastPathPt, nextPathPt) >= \
geometry.distL2(lastPathPt, posPt) and \
geometry.distL2(lastPathPt, nextPathPt) >= \
geometry.distL2(nextPathPt, posPt):
if geometry.intPointInsideTri(triPts0, triPts1, triPts2, posPt):
numberIntersects += 1
lastPathPt = nextPathPt # for next loop
#print numberIntersects # for debugging...
if 1 == numberIntersects % 2: # if intersects odd number of times
pathThrough = triangles, loopPts
break # no need to do more checks, one is good enough
return pathThrough # in case caller wants to do something with it.
def outputRadiiTxt(origPath, txtfile):
distanceRadiusPairs = [(0, origPath[0][0])] # first pair is 0, first radius
lastPt, lastDist = origPath[0][1:], 0
for pt in origPath[1:]: # all but first
newDistance = geometry.distL2(pt[1:], lastPt)
newRadius = pt[0]
lastPt = pt[1:]
lastDist += newDistance
distanceRadiusPairs.append((lastDist, newRadius))
outputFile = open(txtfile, 'w')
for distance, radius in distanceRadiusPairs:
outputFile.write(str(distance) + ", " + str(radius) + " \n")
outputFile.close()
def buildNeighbors(self, allPoints):
'''builds a neighbor dictionary'''
if (not self.__neighbors) or 0 == len(self.__neighbors): # remake
self.__neighbors = {}
for pointStart in allPoints:
neighborList = self.dict['POINT_NEIGHBOR'][pointStart-1]
startXYZ = self.dict['POINT_XYZ'][pointStart-1][1:]
tempList = []
for neighborPoint in neighborList[2:]: # first 2 are p#, order
endXYZ = self.dict['POINT_XYZ'][neighborPoint-1][1:]
distance = geometry.distL2(startXYZ, endXYZ)
tempList.append([neighborPoint, distance])
self.__neighbors[pointStart] = tempList
return self.__neighbors
def getNearbyResidues(pointPath, pdbD, nearbyDistance=0.):
'''returns a list of residues in the pdbD near the pointpath within rad+nd'''
residuesNearPath = []
for pathPt in pointPath:
for index, coord in enumerate(pdbD.coords):
distanceBetween = geometry.distL2(pathPt[1:4], coord)
if distanceBetween < pathPt[0] + nearbyDistance:
residueNumber = pdbD.resNums[index]
chain = pdbD.chains[index]
resChain = str(residueNumber) + str(chain)
if resChain not in residuesNearPath: # guarantee uniqueness
residuesNearPath.append(resChain)
residuesNearPath.sort()
return residuesNearPath
def checkPathBarriers(prefix):
tstName = prefix + ".nocav.tst"
findHolesName = tstName + ".findholes.log"
findHolesFile = open(findHolesName, 'r')
findHolesLines = findHolesFile.readlines()
findHolesFile.close()
HolesName = tstName + ".sideshole.log" # holds all the output
goodHolesName = tstName + ".good.sideshole.log" # just the 1 1 0 1 1
sideHolesName = tstName + ".side.sideshole.log" # just the * * 1 * *
badHolesName = tstName + ".bad.sideshole.log" # all others
pdbWithBarriersFileName = "planes_" + prefix + ".pdb"
pdbBarriers = pdb.pdbData(pdbWithBarriersFileName)
#get the barriers read in and defined
barrierAtomList = [[], []]
for index, resName in enumerate(pdbBarriers.resNames):
if resName == "DUM":
if pdbBarriers.atoms[index][0] == "O":
barrierAtomList[0].append(pdbBarriers.coords[index])
elif pdbBarriers.atoms[index][0] == "N":
barrierAtomList[1].append(pdbBarriers.coords[index])
barrierZ = [barrierAtomList[0][0][2], barrierAtomList[1][0][2]]
barrierZ.sort()
barrierSep = geometry.distL2(barrierAtomList[0][0], barrierAtomList[1][0])
#barrier is just Z coordinate
#setup for main loop over paths
poreSuffix = ".pore.py"
logFile = open(HolesName, 'w')
goodLogFile = open(goodHolesName, 'w')
sideLogFile = open(sideHolesName, 'w')
badLogFile = open(badHolesName, 'w')
#the following 5 things are calculated and written for each path, headers
#the 6th, barrier separation, is really the same for each structure
logFile.write("endsBeyond1count barrier1count endsBetweenCount ")
logFile.write("barrier2count endsBeyond2count barrierSeparation\n")
goodLogFile.write("prefix ")
goodLogFile.write(string.strip(findHolesLines[0]) + " ")
goodLogFile.write("endsBeyond1count barrier1count endsBetweenCount ")
goodLogFile.write("barrier2count endsBeyond2count barrierSeparation\n")
sideLogFile.write("prefix ")
sideLogFile.write(string.strip(findHolesLines[0]) + " ")
sideLogFile.write("endsBeyond1count barrier1count endsBetweenCount ")
sideLogFile.write("barrier2count endsBeyond2count barrierSeparation\n")
badLogFile.write("prefix ")
badLogFile.write(string.strip(findHolesLines[0]) + " ")
badLogFile.write("endsBeyond1count barrier1count endsBetweenCount ")
badLogFile.write("barrier2count endsBeyond2count barrierSeparation\n")
holeNumber = 1
poreFile = tstName + "." + str(holeNumber) + poreSuffix
print poreFile
paths = []
sides, goods = [], []
endsToPaths = {}
pathsToEnds = {}
while os.path.exists(poreFile):
path = comparePaths.readCGOPath(poreFile)
pathRad = comparePaths.readCGOPathWithRadius(poreFile)
paths.append(pathRad)
pathNum = len(paths) - 1
for end in string.split(findHolesLines[holeNumber])[1:3]:
if pathNum not in pathsToEnds:
pathsToEnds[pathNum] = []
pathsToEnds[pathNum].append(end)
if end not in endsToPaths:
endsToPaths[end] = []
endsToPaths[end].append(pathNum)
intersections = [0, 0]
for index, barrier in enumerate(barrierZ):
intersections[index] = countCrossingsZ(path, barrier)
ends = [0, 0, 0]
for endPoint in [path[0], path[-1]]:
endPointZ = endPoint[2]
if endPointZ < barrierZ[0] and endPointZ < barrierZ[1]:
ends[0] += 1
elif endPointZ >= barrierZ[0] and endPointZ <= barrierZ[1]:
ends[1] += 1
elif endPointZ > barrierZ[0] and endPointZ > barrierZ[1]:
ends[2] += 1
outputThisTime = str(ends[0]) + " " + str(intersections[0]) + " " + \
str(ends[1]) + " " + str(intersections[1]) + " " + \
str(ends[2]) + " " + str(barrierSep) + " "
logFile.write(outputThisTime)
logFile.write("\n")
if ends[0] + ends[1] + ends[2] != 2:
print "problems sorting out the ends"
if ends[0] == 1 and ends[2] == 1 and intersections == [1, 1]:
#it is 'good'
goods.append(pathNum)
goodLogFile.write(prefix + " ")
goodLogFile.write(string.strip(findHolesLines[holeNumber]) + " ")
goodLogFile.write(outputThisTime + "\n")
elif ends[1] == 1:
sides.append(pathNum)
sideLogFile.write(prefix + " ")
sideLogFile.write(string.strip(findHolesLines[holeNumber]) + " ")
sideLogFile.write(outputThisTime + "\n")
else:
badLogFile.write(prefix + " ")
badLogFile.write(string.strip(findHolesLines[holeNumber]) + " ")
badLogFile.write(outputThisTime + "\n")
#and that is it for this path
holeNumber += 1 # get set up for next pass
poreFile = tstName + "." + str(holeNumber) + poreSuffix
logFile.close()
goodLogFile.close()
sideLogFile.close()
badLogFile.close()
#next lines are for debugging the new data structures
'''
print sides
print goods
print endsToPaths
print pathsToEnds
'''
#now want to find side branches of good paths
branches = 0
branchSuffix = ".branch.py"
branchFile = tstName + "." + str(branches) + branchSuffix
branchLog = open(tstName + ".branchholes.log", 'w')
branchLog.write(string.strip(findHolesLines[0]) + "\n")
for side in sides:
foundGoods = []
for sideEnd in pathsToEnds[side]:
for good in goods:
for goodEnd in pathsToEnds[good]:
if goodEnd == sideEnd:
foundGoods.append(good)
if len(foundGoods) > 0:
branchedPath = paths[side] # start with whole path
for good in foundGoods: # remove physiological intersecting paths
branchedPath = pathsModule.subtractPaths(branchedPath, paths[good])
if len(branchedPath) > 0: # has to have some length remaining
branches += 1
branchFile = tstName + "." + str(branches) + branchSuffix
print branches, side, foundGoods
tstdebug.debugSetGridSpheres(
branchedPath, 0.5, branchFile, radius=True,
mainColor=(0.01, 0.9, 0.35))
branchLog.write(str(branches) + " ")
branchLog.write(str(pathsToEnds[side][0]) + " ")
branchLog.write(str(pathsToEnds[side][1]) + " ")
branchLog.write("- ") # dummy, not real
branchLog.write("0. 0. 0. 0. 0. 0. 0. 0. 0. 0. \n")
branchLog.close()
addFoundHoleStats.redoFindholes(
prefix, nearbyDistance=4., logExt=".branchholes.log",
poreSuffix=".branch.py", nearbyName=".branch")
def comparePathsManyMetrics(
source=False, target=False, sourceDataManual=False,
sourceRadiiManual=False, core=100):
'''do lots of different metrics to compare the paths'''
#open and read in both first
sourceData, sourceRadii, targetData, targetRadii = False, False, False, False
if source:
if -1 != string.find(source, "py"):
sourceData, sourceRadii = readCGOPathRadius(source)
elif -1 != string.find(source, "sph"):
sourceData, sourceRadii = readSphPathRadius(source)
else:
sourceData = sourceDataManual
sourceRadii = sourceRadiiManual
if target:
if -1 != string.find(target, "py"):
targetData, targetRadii = readCGOPathRadius(target)
elif -1 != string.find(target, "sph"):
targetData, targetRadii = readSphPathRadius(target)
#now have the data... now do the one-sided RMSD thing
sumDistanceSquared, sumWeighted = 0.0, 0.0
sumRadiiDiff = 0.0
#figure out which % of the center (core) to use
outside = (100. - core)/200.
dataCounted = 0.
targetMappedTo, targetMappedToIndices = [], []
withinOne, withinRadius = 0, 0
for index, sourceDatum in enumerate(sourceData):
#make sure in 'core'
if float(index)/float(len(sourceData)) >= outside and \
float(index)/float(len(sourceData)) < (1. - outside):
dataCounted += 1.
#find match
closest, distance = targetData[0], geometry.distL2(
targetData[0], sourceDatum)
tarRad = 1.
for tarIndex, targetDatum in enumerate(targetData):
thisDist = geometry.distL2(targetDatum, sourceDatum)
if thisDist < distance:
closest = targetDatum
distance = thisDist
tarRad = targetRadii[tarIndex]
if distance < 1.:
withinOne += 1
if distance < tarRad:
withinRadius += 1
if sourceRadii:
sumRadiiDiff += abs(tarRad - sourceRadii[index])**2.
if closest not in targetMappedTo:
targetMappedTo.append(closest)
targetIndex = targetData.index(closest)
targetMappedToIndices.append(targetIndex)
sumDistanceSquared += distance**2.
sumWeighted += distance**2.*(1./(tarRad+.0000000001))
targetMappedToIndices.sort()
if dataCounted > 0.:
prmsd = (sumDistanceSquared/float(dataCounted))**0.5
radiicomp = (sumRadiiDiff/float(dataCounted))**0.5
coverage = float(len(targetMappedTo)) / float(len(targetData))
span = float(
targetMappedToIndices[-1] - targetMappedToIndices[0]+1.) / float(
len(targetData))
#percentage of length of target from first covered to last covered
wrmsd = (sumWeighted/dataCounted)**0.5
less1 = float(withinOne)/float(dataCounted)
lessrad = float(withinRadius)/float(dataCounted)
else:
prmsd = "err"
radiicomp = "err"
coverage = "err"
span = "err"
wrmsd = "err"
less1 = "err"
lessrad = "err"
return prmsd, coverage, span, wrmsd, less1, lessrad, radiicomp
def checkPathBarriers(prefix):
tstName = prefix + ".nocav.tst"
findHolesName = tstName + ".findholes.log"
findHolesFile = open(findHolesName, 'r')
findHolesLines = findHolesFile.readlines()
findHolesFile.close()
HolesName = tstName + ".membranehole.log" # holds all the output
goodHolesName = tstName + ".good.membranehole.log" # just the 1 1 0 1 1
sideHolesName = tstName + ".side.membranehole.log" # just the * * 1 * *
badHolesName = tstName + ".bad.membranehole.log" # all others
pdbWithBarriersFileName = "planes_" + prefix + ".pdb"
pdbBarriers = pdb.pdbData(pdbWithBarriersFileName)
#get the barriers read in and defined
barrierAtomList = [[], []]
for index, resName in enumerate(pdbBarriers.resNames):
if resName == "DUM":
if pdbBarriers.atoms[index][0] == "O":
barrierAtomList[0].append(pdbBarriers.coords[index])
elif pdbBarriers.atoms[index][0] == "N":
barrierAtomList[1].append(pdbBarriers.coords[index])
barrierZ = [barrierAtomList[0][0][2], barrierAtomList[1][0][2]]
barrierZ.sort()
barrierSep = geometry.distL2(barrierAtomList[0][0], barrierAtomList[1][0])
#barrier is just Z coordinate
#setup for main loop over paths
poreSuffix = ".pore.py"
logFile = open(HolesName, 'w')
goodLogFile = open(goodHolesName, 'w')
sideLogFile = open(sideHolesName, 'w')
badLogFile = open(badHolesName, 'w')
#the following 5 things are calculated and written for each path, headers
#the 6th, barrier separation, is really the same for each structure
logFile.write("endsBeyond1count barrier1count endsBetweenCount ")
logFile.write("barrier2count endsBeyond2count barrierSeparation\n")
goodLogFile.write("prefix ")
goodLogFile.write(string.strip(findHolesLines[0]) + " ")
goodLogFile.write("endsBeyond1count barrier1count endsBetweenCount ")
goodLogFile.write("barrier2count endsBeyond2count barrierSeparation\n")
sideLogFile.write("prefix ")
sideLogFile.write(string.strip(findHolesLines[0]) + " ")
sideLogFile.write("endsBeyond1count barrier1count endsBetweenCount ")
sideLogFile.write("barrier2count endsBeyond2count barrierSeparation\n")
badLogFile.write("prefix ")
badLogFile.write(string.strip(findHolesLines[0]) + " ")
badLogFile.write("endsBeyond1count barrier1count endsBetweenCount ")
badLogFile.write("barrier2count endsBeyond2count barrierSeparation\n")
holeNumber = 1
poreFile = tstName + "." + str(holeNumber) + poreSuffix
print poreFile
paths = []
sides = []
while os.path.exists(poreFile):
path = comparePaths.readCGOPath(poreFile)
paths.append(path)
intersections = [0, 0]
for index, barrier in enumerate(barrierZ):
intersections[index] = countCrossingsZ(path, barrier)
ends = [0, 0, 0]
for endPoint in [path[0], path[-1]]:
endPointZ = endPoint[2]
if endPointZ < barrierZ[0] and endPointZ < barrierZ[1]:
ends[0] += 1
elif endPointZ >= barrierZ[0] and endPointZ <= barrierZ[1]:
ends[1] += 1
elif endPointZ > barrierZ[0] and endPointZ > barrierZ[1]:
ends[2] += 1
outputThisTime = str(ends[0]) + " " + str(intersections[0]) + " " + \
str(ends[1]) + " " + str(intersections[1]) + " " + \
str(ends[2]) + " " + str(barrierSep) + " "
logFile.write(outputThisTime)
logFile.write("\n")
if ends[0] + ends[1] + ends[2] != 2:
print "problems sorting out the ends"
if ends[0] == 1 and ends[2] == 1 and intersections == [1, 1]:
# it is 'good'
goodLogFile.write(prefix + " ")
goodLogFile.write(string.strip(findHolesLines[holeNumber]) + " ")
goodLogFile.write(outputThisTime + "\n")
elif ends[1] == 2:
sides.append(len(paths) - 1)
sideLogFile.write(prefix + " ")
sideLogFile.write(string.strip(findHolesLines[holeNumber]) + " ")
sideLogFile.write(outputThisTime + "\n")
else:
badLogFile.write(prefix + " ")
badLogFile.write(string.strip(findHolesLines[holeNumber]) + " ")
badLogFile.write(outputThisTime + "\n")
#and that is it for this path
holeNumber += 1 # get set up for next pass
poreFile = tstName + "." + str(holeNumber) + poreSuffix
print sides
logFile.close()
goodLogFile.close()
sideLogFile.close()
badLogFile.close()
def pathCrowFliesLength(path): '''computes the distance from the first to the last point''' firstPt = path[0][1:4] lastPt = path[-1][1:4] return geometry.distL2(firstPt, lastPt)
