def create_geometry(file_name=None, pixel_width=None, pixel_height=None):
inst_name = "REF_L"
if pixel_width is None:
pixel_width = PIXEL_WIDTH
if pixel_height is None:
pixel_height = PIXEL_HEIGHT
if file_name is None:
xml_outfile = inst_name + "_Definition.xml"
else:
xml_outfile = file_name
det = MantidGeom(inst_name)
det.addSnsDefaults()
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-13.63) #was 13.601
det.addSamplePosition()
det.addComment("MONITORS")
det.addMonitors(names=["monitor1"], distance=["-0.23368"])
det.addComment("DETECTOR")
id_str = "detector1"
det.addComponent("detector1", id_str)
doc_handle = det.makeTypeElement(id_str)
det.addPixelatedTube("tube",
NUM_PIXELS_PER_TUBE,
PIXEL_HEIGHT * NUM_PIXELS_PER_TUBE,
type_name="pixel")
det.addCylinderPixel("pixel", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
pixel_width / 2.0, pixel_height)
for i in range(0, NUM_TUBES):
det.addComponent("tube%d" % i, root=doc_handle)
det.addDetector(str((i - NUM_TUBES / 2 + 0.5) * pixel_width), "0",
"+1.28", "0", "0", "0", "tube%d" % i, "tube")
det.addComment("FIXME: Do something real here.")
det.addDummyMonitor(0.01, 0.03)
id_list = [0, NUM_TUBES * NUM_PIXELS_PER_TUBE - 1, None]
det.addDetectorIds(id_str, id_list)
det.addMonitorIds(["-1"])
det.writeGeom(xml_outfile)
def create_geometry(file_name=None, pixel_width=None, pixel_height=None):
inst_name = "REF_L"
short_name = "REF_L"
if pixel_width is None: pixel_width = PIXEL_WIDTH
if pixel_height is None: pixel_height = PIXEL_HEIGHT
if file_name is None:
xml_outfile = inst_name+"_Definition.xml"
else:
xml_outfile = file_name
det = MantidGeom(inst_name)
det.addSnsDefaults()
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-13.601)
det.addSamplePosition()
det.addComment("MONITORS")
det.addMonitors(names=["monitor1"], distance=["-0.23368"])
id_str = "detector1"
det.addComponent("detector1", id_str)
doc_handle = det.makeTypeElement(id_str)
det.addPixelatedTube("tube", NUM_PIXELS_PER_TUBE, pixel_height*NUM_PIXELS_PER_TUBE, type_name="pixel")
det.addCylinderPixel("pixel", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
pixel_width/2.0, pixel_height)
for i in range(0, NUM_TUBES):
det.addComponent("tube%d" % i, root=doc_handle)
det.addDetector(str((i-NUM_TUBES/2+0.5)*pixel_width), "0", "0", "0", "0", "0", "tube%d"%i, "tube")
det.addComment("FIXME: Do something real here.")
det.addDummyMonitor(0.01, 0.03)
id_list = [0, NUM_TUBES*NUM_PIXELS_PER_TUBE-1, None]
det.addDetectorIds(id_str, id_list)
det.addMonitorIds(["-1"])
det.writeGeom(xml_outfile)
def create_geometry(file_name=None,
tube_width=TUBE_WIDTH,
tube_length=TUBE_SIZE):
"""
Create a geometry file
@param file_name: name of the output file [optional]
@param tube_width: width of the tubes (pixel width)
@param tube_length: length of the tubes (number of pixels times pixel height)
"""
# Get geometry information file
inst_name = "EQ-SANS"
if file_name is None:
xml_outfile = inst_name + "_Definition.xml"
else:
xml_outfile = file_name
det = MantidGeom(inst_name)
det.addSnsDefaults()
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-14.122)
det.addSamplePosition()
det.addComment("MONITORS")
det.addMonitors(names=["monitor1"], distance=["-0.23368"])
id_str = "detector1"
det.addComponent(id_str, id_str)
doc_handle = det.makeTypeElement(id_str)
det.addCylinderPixel("pixel", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(tube_width / 2.0),
(tube_length / NUM_PIXELS_PER_TUBE))
for i in range(0, NUM_BANKS / 2):
i_low_bank = i
i_high_bank = i + NUM_BANKS / 2
low_bank = "bank" + str(i_low_bank + 1)
high_bank = "bank" + str(i_high_bank + 1)
# FRONT plane
for j in range(NUM_TUBES_PER_BANK):
tube_id = "bank" + str(i_low_bank + 1) + "_tube" + str(j + 1)
x, y, z = get_position(i_low_bank, j, tube_width)
det.addComponent(tube_id, root=doc_handle)
det.addPixelatedTube('_' + tube_id,
NUM_PIXELS_PER_TUBE,
tube_length,
type_name="pixel")
det.addDetector(x, y, z, "0", "0", "0", tube_id, '_' + tube_id)
# BACK plane
for j in range(NUM_TUBES_PER_BANK):
tube_id = "bank" + str(i_high_bank + 1) + "_tube" + str(j + 1)
x, y, z = get_position(i_high_bank, j, tube_width)
det.addComponent(tube_id, root=doc_handle)
det.addPixelatedTube('_' + tube_id,
NUM_PIXELS_PER_TUBE,
tube_length,
type_name="pixel")
det.addDetector(x, y, z, "0", "0", "0", tube_id, '_' + tube_id)
det.addComment("MONITOR SHAPE")
det.addComment("FIXME: Do something real here.")
det.addDummyMonitor(0.01, 0.03)
det.addComment("DETECTOR IDs")
id_list = [
0, NUM_BANKS * NUM_TUBES_PER_BANK * NUM_PIXELS_PER_TUBE - 1, None
]
det.addDetectorIds(id_str, id_list)
det.addComment("MONITOR IDs")
det.addMonitorIds(["-1"])
det.writeGeom(xml_outfile)
def create_geometry(file_name=None, tube_width=TUBE_WIDTH, tube_length=TUBE_SIZE):
"""
Create a geometry file
@param file_name: name of the output file [optional]
@param tube_width: width of the tubes (pixel width)
@param tube_length: length of the tubes (number of pixels times pixel height)
"""
# Get geometry information file
inst_name = "EQ-SANS"
if file_name is None:
xml_outfile = inst_name+"_Definition.xml"
else:
xml_outfile = file_name
det = MantidGeom(inst_name)
det.addSnsDefaults()
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-14.122)
det.addSamplePosition()
det.addComment("MONITORS")
det.addMonitors(names=["monitor1"], distance=["-0.23368"])
id_str = "detector1"
det.addComponent(id_str, id_str)
doc_handle = det.makeTypeElement(id_str)
det.addCylinderPixel("pixel", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(tube_width/2.0),
(tube_length/NUM_PIXELS_PER_TUBE))
for i in range(0, NUM_BANKS/2):
i_low_bank = i
i_high_bank = i+NUM_BANKS/2
low_bank = "bank"+str(i_low_bank+1)
high_bank = "bank"+str(i_high_bank+1)
# FRONT plane
for j in range(NUM_TUBES_PER_BANK):
tube_id = "bank"+str(i_low_bank+1)+"_tube"+str(j+1)
x, y, z = get_position(i_low_bank, j, tube_width)
det.addComponent(tube_id, root=doc_handle)
det.addPixelatedTube('_'+tube_id, NUM_PIXELS_PER_TUBE, tube_length, type_name="pixel")
det.addDetector(x, y, z, "0", "0", "0", tube_id, '_'+tube_id)
# BACK plane
for j in range(NUM_TUBES_PER_BANK):
tube_id = "bank"+str(i_high_bank+1)+"_tube"+str(j+1)
x, y, z = get_position(i_high_bank, j, tube_width)
det.addComponent(tube_id, root=doc_handle)
det.addPixelatedTube('_'+tube_id, NUM_PIXELS_PER_TUBE, tube_length, type_name="pixel")
det.addDetector(x, y, z, "0", "0", "0", tube_id, '_'+tube_id)
det.addComment("MONITOR SHAPE")
det.addComment("FIXME: Do something real here.")
det.addDummyMonitor(0.01, 0.03)
det.addComment("DETECTOR IDs")
id_list = [0, NUM_BANKS*NUM_TUBES_PER_BANK*NUM_PIXELS_PER_TUBE-1, None]
det.addDetectorIds(id_str, id_list)
det.addComment("MONITOR IDs")
det.addMonitorIds(["-1"])
det.writeGeom(xml_outfile)