def calculate(self, time, delta_time):
self._time_series.set_time(time)
unit_delta_time = delta_time
if self._time_converter == None:
volume = units.to_si(units(self._time_series.volume,
units.litre)) * delta_time
else:
volume = units.to_si(
units(self._time_series.volume,
units.litre)) * delta_time / units.value(
self._time_converter(1), units.second)
# thermal losses when used [W/K]
on_losses = units.value(volume) * units.value(
Water().weight) * units.value(
Water().thermal_capacity) / unit_delta_time
# total thermal losses [W/K]
losses = self._off_losses + on_losses
self._temperature = self._temperature + \
((unit_delta_time * losses / self._cb) * (self._temperature_in - self._temperature)) + \
(unit_delta_time / self._cb) * self.power
def calculate(self, time, delta_time):
self._time_series.set_time(time)
unit_delta_time = delta_time
volume = units.to_si(units(self._time_series.volume, units.litre))*delta_time/units.value(self._time_converter(1), units.second)
# thermal losses when used [W/K]
on_losses = units.value(volume)*units.value(Water().weight)*units.value(Water().thermal_capacity)/unit_delta_time
# total thermal losses [W/K]
losses = self._off_losses + on_losses
self._temperature = self._temperature + \
((unit_delta_time*losses/self._cb)*(self._temperature_in-self._temperature)) +\
(unit_delta_time/self._cb)*self.power
def decode_unit(self, data):
return units(data)
def isvalid_unit(self, data):
try:
units(data)
return True
except:
return False
from gridsim.iodata.input import CSVReader
from gridsim.iodata.output import FigureSaver, CSVSaver
# Gridsim simulator.
sim = Simulator()
# Create a simple thermal process: A room thermal coupling between the room and
# the outside temperature.
# ___________
# | |
# | room |
# | 20 C | outside <= example time series (CSV) file
# | |]- 3 W/K
# |___________|
#
celsius = units(20, units.degC)
room = sim.thermal.add(
ThermalProcess.room('room',
50 * units.meter * units.meter, 2.5 * units.metre,
units.convert(celsius, units.kelvin)))
outside = sim.thermal.add(
TimeSeriesThermalProcess('outside',
SortedConstantStepTimeSeriesObject(
CSVReader('./data/example_time_series.csv')),
lambda t: t * units.hours,
temperature_calculator=lambda t: units.convert(
units(t, units.degC), units.kelvin)))
sim.thermal.add(
ThermalCoupling('room to outside', 1 * units.thermal_conductivity, room,
outside))
from gridsim.recorder import PlotRecorder
from gridsim.iodata.output import FigureSaver, CSVSaver
# Gridsim simulator.
sim = Simulator()
# Create a simple thermal process: Two rooms and the thermal coupling between
# them and to the outside temperature.
# __________ ___________
# | | ________________ | |
# | room1 |]-| room1 to room2 |-[| cold_room |
# | 18 C | |_____50_W/K_____| | 25 C | outside 5 C
# 10 W/K -[| | | |]- 10 W/K
# |__________| |___________|
#
celsius = units(18, units.degC)
room1 = sim.thermal.add(
ThermalProcess.room('room1',
50 * units.meter * units.meter, 2.5 * units.metre,
units.convert(celsius, units.kelvin)))
celsius = units(25, units.degC)
room2 = sim.thermal.add(
ThermalProcess.room('room2',
50 * units.meter * units.meter, 2.5 * units.metre,
units.convert(celsius, units.kelvin)))
celsius = units(5, units.degC)
outside = sim.thermal.add(
ConstantTemperatureProcess('outside', units.convert(celsius,
units.kelvin)))
pass
def calculate(self, time, delta_time):
pass
def update(self, time, delta_time):
for el in self._elements:
el.update(time, delta_time)
Simulator.register_simulation_module(MyModule)
# Create a simulator, add an element and record the temperature signal using
# a recorder.
sim = Simulator()
print("Loading data...")
obj = sim.my.add(MyObject("myObject", CSVReader('./data/example_time_series.csv')))
obj.convert("temperature", lambda t: units(t, units.degC))
rec = PlotRecorder('temperature', units.month, units.kelvin)
sim.record(rec, obj)
print("Running simulation...")
sim.run(units.year, units.day)
print("Saving data...")
FigureSaver(rec, "Temperature").save('./output/timeseries2-example.png')
print ' ' + subject + '.' + self.attribute_name +\
' = ' + str(units.convert(value*units.kelvin, self._y_unit))
# Create simulator.
sim = Simulator()
# Setup topology (For simplicity we just take a trivial thermal simulation):
# __________ ___________
# | | ___________ | |
# | hot_room |]-----| coupling |-------[| cold_room |
# | 60 C | | 1m2 | | |
# | | |__100_W/K__| | 20 C |
# |__________| <-----------> |___________|
# 1m
celsius = units(60, units.degC)
hot_room = sim.thermal.add(ThermalProcess.room('hot_room',
50*units.meter*units.meter,
2.5*units.metre,
celsius.to(units.kelvin)))
celsius = units(20, units.degC)
cold_room = sim.thermal.add(ThermalProcess.room('cold_room',
50*units.meter*units.meter,
2.5*units.metre,
celsius.to(units.kelvin)))
sim.thermal.add(ThermalCoupling('coupling',
100*units.thermal_conductivity,
hot_room, cold_room))
def calculate(self, time, delta_time):
pass
def update(self, time, delta_time):
for el in self._elements:
el.update(time, delta_time)
Simulator.register_simulation_module(MyModule)
# Create a simulator, add an element and record the temperature signal using
# a recorder.
sim = Simulator()
print("Loading data...")
obj = sim.my.add(
MyObject("myObject", CSVReader('./data/example_time_series.csv')))
obj.convert("temperature", lambda t: units(t, units.degC))
rec = PlotRecorder('temperature', units.month, units.kelvin)
sim.record(rec, obj)
print("Running simulation...")
sim.run(units.year, units.day)
print("Saving data...")
FigureSaver(rec, "Temperature").save('./output/timeseries2-example.png')
from gridsim.thermal.core import ThermalProcess, ThermalCoupling
from gridsim.iodata.output import CSVSaver
# Create a simulation.
sim = Simulator()
# Setup topology (For simplicity we just take a trivial thermal simulation):
# __________ ___________
# | | ___________ | |
# | hot_room |]-----| coupling |-------[| cold_room |
# | | | 1m2 | | |
# | 60 C | |__100_W/K__| | 20 C |
# |__________| <-----------> |___________|
# 1m
#
celsius = units(60, units.degC)
hot_room = sim.thermal.add(
ThermalProcess.room('hot_room', 50 * units.meter * units.meter,
2.5 * units.metre, celsius.to(units.kelvin)))
celsius = units(20, units.degC)
cold_room = sim.thermal.add(
ThermalProcess.room('cold_room', 50 * units.meter * units.meter,
2.5 * units.metre, celsius.to(units.kelvin)))
sim.thermal.add(
ThermalCoupling('coupling', 100 * units.thermal_conductivity, hot_room,
cold_room))
# Add the temperature recorder.
temperature_recorder = PlotRecorder('temperature', units.second, units.degC)
from gridsim.iodata.input import CSVReader
from gridsim.iodata.output import FigureSaver, CSVSaver
# Gridsim simulator.
sim = Simulator()
# Create a simple thermal process: A room thermal coupling between the room and
# the outside temperature.
# ___________
# | |
# | room |
# | 20 C | outside <= example time series (CSV) file
# | |]- 3 W/K
# |___________|
#
celsius = units(20, units.degC)
room = sim.thermal.add(ThermalProcess.room('room',
50*units.meter*units.meter,
2.5*units.metre,
units.convert(celsius, units.kelvin)))
outside = sim.thermal.add(
TimeSeriesThermalProcess('outside', SortedConstantStepTimeSeriesObject(CSVReader('./data/example_time_series.csv')),
lambda t: t*units.hours,
temperature_calculator=
lambda t: units.convert(units(t, units.degC), units.kelvin)))
sim.thermal.add(ThermalCoupling('room to outside', 1*units.thermal_conductivity,
room, outside))
# Create a plot recorder that records the temperatures of all thermal processes.
temp = PlotRecorder('temperature', units.second, units.degC)
# Gridsim simulator.
sim = Simulator()
sim.electrical.load_flow_calculator = DirectLoadFlowCalculator()
# Create a simple thermal process: A room and a thermal coupling between the
# room and the outside temperature.
# ___________
# | |
# | room |
# | 20 C | outside <= example time series (CSV) file
# | |]- 3 W/K
# |___________|
#
# The room has a surface of 50m2 and a height of 2.5m.
celsius = units(20, units.degC)
room = sim.thermal.add(ThermalProcess.room('room',
50*units.meter*units.meter,
2.5*units.metre,
units.convert(celsius, units.kelvin)))
outside = sim.thermal.add(
TimeSeriesThermalProcess('outside', SortedConstantStepTimeSeriesObject(CSVReader('./data/example_time_series.csv')),
lambda t: t*units.hour,
temperature_calculator=
lambda t: units.convert(units(t, units.degC),
units.kelvin)))
sim.thermal.add(ThermalCoupling('room to outside',
10.0*units.thermal_conductivity,
room, outside))
from gridsim.recorder import PlotRecorder
from gridsim.iodata.output import FigureSaver, CSVSaver
# Gridsim simulator.
sim = Simulator()
# Create a simple thermal process: Two rooms and the thermal coupling between
# them and to the outside temperature.
# __________ ___________
# | | ________________ | |
# | room1 |]-| room1 to room2 |-[| cold_room |
# | 18 C | |_____50_W/K_____| | 25 C | outside 5 C
# 10 W/K -[| | | |]- 10 W/K
# |__________| |___________|
#
celsius = units(18, units.degC)
room1 = sim.thermal.add(ThermalProcess.room('room1',
50*units.meter*units.meter,
2.5*units.metre,
units.convert(celsius, units.kelvin)))
celsius = units(25, units.degC)
room2 = sim.thermal.add(ThermalProcess.room('room2',
50*units.meter*units.meter,
2.5*units.metre,
units.convert(celsius, units.kelvin)))
celsius = units(5, units.degC)
outside = sim.thermal.add(
ConstantTemperatureProcess('outside', units.convert(celsius, units.kelvin)))
sim.thermal.add(ThermalCoupling('room1 to outside',
