def get_heartrate_and_breathing(self, data):
framerate = self.framerate
if self.resample != -1:
data = resample(data,
(len(data) // self.framerate) * self.resample)
framerate = self.resample
if self.filter:
data = hp.filter_signal(data, [0.7, 3.5],
sample_rate=framerate,
order=3,
filtertype='bandpass')
data = hp.scale_data(data)
wd, m = hp.process(data, framerate, high_precision=True, clean_rr=True)
self.m = m
self.wd = wd
hr = m["bpm"]
rr = m["breathingrate"]
if self.show:
hp.plotter(wd, m)
if self.save_path != '':
save_plot(data, x_label="Time", y_label="BVP Signal")
return hr, rr * 60
def calculate_hr(signal_data, timestamps=None):
sampling_rate = 47.63
if timestamps is not None:
sampling_rate = hp.get_samplerate_mstimer(timestamps)
try:
wd, m = hp.process(signal_data, sample_rate=sampling_rate)
hr_bpm = m["bpm"]
except:
hr_bpm = 75.0
if np.isnan(hr_bpm):
hr_bpm = 75.0
return hr_bpm
else:
# We are working with predicted HR:
# need to filter and do other stuff.. lets see
signal_data = hp.filter_signal(signal_data,
cutoff=[0.7, 2.5],
sample_rate=sampling_rate,
order=6,
filtertype='bandpass')
try:
wd, m = hp.process(signal_data,
sample_rate=sampling_rate,
high_precision=True,
clean_rr=True)
hr_bpm = m["bpm"]
except:
print(
"BadSignal received (could not be filtered) using def HR value = 75bpm"
)
hr_bpm = 75.0
return hr_bpm
def upsample(data, low, high):
# x = np.arange(low, high, 1/1000)
# y = np.interp(x, data["Time"], data["PPG"])
sf = len(data)/(high-low)
y = hp.filter_signal(data["PPG"], [0.7, 3.5], sample_rate=sf,
order=3, filtertype='bandpass')
return y
def ppg_preprocessing(data, sampling_rate, low_pass=0.7, high_pass=2.5):
filtered = hp.filter_signal(data, [low_pass, high_pass],
sample_rate=sampling_rate,
order=3,
filtertype='bandpass')
return filtered
def clean_ppg(data: np.ndarray, sampling_rate: int, low_pass: float=0.7, high_pass: float=2.5):
'''
Removes high frequency noises
It uses `heartpy <https://github.com/paulvangentcom/heartrate_analysis_python>` library
Parameters
-----------
data: numpy.ndarray
An 1D array of PPG data
smpling_rate: int, default: 128
sampling rate
low_pass: float, default: 0.7
The low cut frequency for filtering
high_pass: float, default: 2.5
The high cut frequency for filtering
Returns
-------
cleaned_data: numpy.array
An 1D array of cleaned PPG data
'''
filtered = hp.filter_signal(data,
[low_pass, high_pass],
sample_rate=sampling_rate,
order=3,
filtertype='bandpass')
return filtered
def clean_ppg(data, sampling_rate, low_pass=0.7, high_pass=2.5):
'''
Removes high frequency noises
'''
filtered = hp.filter_signal(data,
[low_pass, high_pass],
sample_rate=sampling_rate,
order=3,
filtertype='bandpass')
return filtered
def analyse_data(self):
try:
sample_rate = 250
data = hp.get_data('najnowszy2.csv')
filtered = hp.filter_signal(
data, cutoff=0.05, sample_rate=sample_rate, filtertype='notch')
working_data, measures = hp.process(filtered, sample_rate)
return data, working_data, measures
except hp.exceptions.BadSignalWarning as err:
print(err)
return None, None, None
def filter_ecg(self):
"""Applies a 0.5-30Hz, 2nd order bandpass filter to raw data."""
print("\n" +
"Filtering data with {}-{}Hz, 2nd order bandpass filter...".
format(self.low_f, self.high_f))
# Runs bandpass filter on data
self.ecg_filtered = heartpy.filter_signal(
data=[float(i) for i in self.ecg_raw],
cutoff=[self.low_f, self.high_f],
sample_rate=self.signal_frequency,
filtertype="bandpass",
order=2)
print("Filtering complete.")
def filter_signal(filtered, sample_rate, data):
"""
функция для избавляения от ненужных компонентов, не задевая QRS
:param filtered: отфильтрованный ранее сигнал
:param sample_rate: шаг
:param data: первоначальные данные, используются для сранении при прописовке графиков
:return: отфильтрованный сигнал
"""
filtered = hp.filter_signal(filtered,
cutoff=0.05,
sample_rate=sample_rate,
filtertype='notch')
# plt.figure(figsize=(12, 4))
# plt.title('Original and Filtered signal')
# plt.plot(data, label='original data')
# plt.plot(filtered, alpha=0.5, label='filtered data')
# plt.legend()
return filtered
def filter_data(time, raw_volt):
"""This function filters out noise below 10 Hz and above 50Hz
This filter takes the time and raw_volt data as input and
filters out noises below 10 Hz and above 50 Hz using the heartpy
function filter_signal. See documentation on the filter_signal function
at: https://python-heart-rate-analysis-toolkit.readthedocs.io/en/
latest/_modules/heartpy/filtering.html
Args:
time (list): list of time values for the ECG data
volts (list): list of ECG voltage magnitudes
Returns:
list : the filtered ECG voltage values
"""
logging.info('Filtering Data')
sample_rate = 1 / (time[1] - time[0])
volt = hp.filter_signal(raw_volt, [5, 20], sample_rate, 2, 'bandpass')
return volt
def get_bpm_estimate(self, time_data, cam_data):
fps = hp.get_samplerate_datetime(time_data, '%S.%f')
cam_bpm = 0
filtered_ppg_r = hp.filter_signal(cam_data,
cutoff=[0.8, 1],
filtertype='bandpass',
sample_rate=fps,
order=4,
return_top=False)
try:
working_data, measures = hp.process(cam_data, fps)
except BadSignalWarning:
print("Bad signal")
else:
if (measures['bpm'] > 40 and measures['bpm'] < 180):
cam_bpm = measures['bpm']
return filtered_ppg_r, cam_bpm
def run_analysis(self, plot=False):
# Filter the signal
filtered = hp.filter_signal(self.data,
cutoff=0.05,
sample_rate=self.sample_rate,
filtertype='notch')
# Run analysis
wd, m = hp.process(hp.scale_data(filtered), self.sample_rate)
if plot:
# Visualise in plot of custom size
plt.figure(figsize=(12, 4))
hp.plotter(wd, m)
# Display computed measures
for measure in m.keys():
print('%s: %f' % (measure, m[measure]))
return m
def process_ecg(data, show=False, framerate=BASE_FREQUENCY):
filtered = hp.filter_signal(data, [0.7, 3.5],
sample_rate=framerate,
order=3,
filtertype='bandpass')
#filtered = hp.remove_baseline_wander(filtered, FREQUENCY)
wd, m = hp.process(hp.scale_data(filtered), framerate)
if show:
print(wd.keys())
print(m.keys())
hp.plotter(wd, m)
save_plot(wd["breathing_signal"],
str(framerate) + "breathing_signal_hp.png",
framerate,
x_label='Time (' + str(framerate) + 'hz)',
y_label='Breathing Signal')
hr = m["bpm"]
rr = m["breathingrate"]
RR_list = wd["RR_list"]
return hr, rr, RR_list
points = data_influx.get_points()
analog_list = []
time_list = []
for p in points:
analog_list.append(p['analog'])
time_list.append(p['time'])
analog_list.reverse()
time_list.reverse()
data = np.array(analog_list)
datetime_data = np.array(time_list)
fs = hp.get_samplerate_datetime(datetime_data,
timeformat='%Y-%m-%dT%H:%M:%S.%fZ')
filtered = hp.enhance_peaks(data, iterations=2)
filtered = hp.filter_signal(filtered, cutoff=3, sample_rate=fs, order=2)
try:
working_data, measures = hp.process(filtered,
fs,
report_time=True,
calc_freq=True)
except:
print("error calculating RR")
sys.exit(0)
# hp.plotter(working_data, measures)
filtered_body = []
for i in range(0, len(filtered)):
point = {
"measurement": "sensor_filtered",
def analyze(self, a):
# Correct the orientation of the frame.
frame = np.fliplr(np.rot90(a))
print('frame.shape = {}'.format(frame.shape))
global camData, camBPMData, psData, psBPMData, time
signal_window = frame[self.row:self.row + self.window,
self.column:self.column + self.window, :]
if (LIGHT_COLOR == 'RED'):
signal_window = signal_window[:, :, 0]
elif (LIGHT_COLOR == 'BLUE'):
signal_window = signal_window[:, :, 1]
signal = np.mean(np.mean(signal_window))
# shift data in the arrays one sample left
camData[:-1] = camData[1:]
camBPMData[:-1] = camBPMData[1:]
psData[:-1] = psData[1:]
psBPMData[:-1] = psBPMData[1:]
time[:-1] = time[1:]
camData[-1] = signal
time[-1] = (datetime.now() - self.START_TIME).total_seconds()
fps = 1 / (time[1] - time[0])
cam_bpm = 0
if (fps < 0):
print('negative fps: {}'.format(fps))
elif USE_RT_ANALYSIS:
camSig = camData - np.mean(camData)
filtered_ppg_r = hp.filter_signal(camSig,
cutoff=[0.8, 1],
filtertype='bandpass',
sample_rate=fps,
order=4,
return_top=False)
try:
working_data, measures = hp.process(camSig, 10.0)
except BadSignalWarning:
print("Bad signal")
else:
if (measures['bpm'] > 50 and measures['bpm'] < 120):
cam_bpm = measures['bpm']
data = pulseOx.get_data()
psData[-1] = data['pulseWaveform']
psBPMData[-1] = data['pulseRate']
camBPMData[-1] = cam_bpm
if (USE_GUI):
ppg_gui.update(self.draw_window(frame), data_dict)
writer.save_to_csv(data_dict)
tracker.track_performance(False, True)
print('(cam_bpm={} , fps={})'.format(int(cam_bpm), int(fps)))
def main(writer):
"""
A function to extract the bpm from PPG data in a .csv file.
Parameters
----------
writer: PPG_Writer
A PPG_Writer object initialized with the desired .csv file.
"""
global bpms, snrs
'''
Get/Display raw data and sampling rate.
'''
# Acquire time-series data from the .csv file
# Ignore the first second of data, since it's very different from the other data.
timeData = writer.get_time_data()[30:]
camDataRed = writer.get_cam_data_red()[30:]
camDataGreen = writer.get_cam_data_green()[30:]
pulseData = writer.get_pulseox_data()[30:]
# Acquire sampling rate and ground truth BPM from the .csv file
sampling_rate = hp.get_samplerate_datetime(timeData, '%S.%f')
BPM_TRUTH = writer.get_bpm()
# If desired, graph the raw PPG time-series data for both channels.
if DISPLAY:
plt.title("Raw PPG Data")
#plt.plot(timeData, camDataRed, "-r", label="Red")
plt.plot(timeData, camDataGreen, "-g", label="Green")
plt.legend(loc="lower right")
plt.ylabel("Mean Pixel Intensity")
plt.xlabel("Time (seconds)")
plt.show()
'''
Interpolate PPG signals
'''
new_fs = 30
sampling_interval = 1 / new_fs
# Quantize beginning + ending time to the nearest multiple of sampling_interval.
initial_time = int(timeData[0] * new_fs) / new_fs
end_time = int(timeData[-1] * new_fs) / new_fs
# Figure out number of samples.
elapsed_time = end_time - initial_time
num_samples = int(elapsed_time * new_fs) + 1
# Generate uniform time scale and interpolation function
uniform_time = np.linspace(initial_time,
end_time,
num=num_samples,
endpoint=True)
f_red = interp1d(timeData, camDataRed, fill_value="extrapolate")
f_green = interp1d(timeData, camDataGreen, fill_value="extrapolate")
# Use interpolation function to generate wave.
new_red = f_red(uniform_time)
new_green = f_green(uniform_time)
N = len(new_red)
'''
Filter/Enhance Signals
'''
# Filter the interpolated PPG signals with a [0.7, 4] Hz bandpass filter.
LOWER_CUTOFF = 0.7
UPPER_CUTOFF = 4
new_red = hp.filter_signal(new_red,
cutoff=[LOWER_CUTOFF, UPPER_CUTOFF],
filtertype='bandpass',
sample_rate=new_fs,
order=4,
return_top=False)
new_green = hp.filter_signal(new_green,
cutoff=[LOWER_CUTOFF, UPPER_CUTOFF],
filtertype='bandpass',
sample_rate=new_fs,
order=4,
return_top=False)
# If desired, graph the filtered PPG time-series for both color channels.
if DISPLAY:
plt.title("Filtered PPG Data")
#plt.plot(uniform_time, new_red, '-r', label='Red')
plt.plot(uniform_time, new_green, '-g', label='Green')
plt.legend(loc="lower right")
plt.ylabel("Mean Pixel Intensity")
plt.xlabel("Time (seconds)")
plt.show()
'''
Take FFT of PPGs
'''
# Calculate FFT magnitude of both PPG signals.
# Remove frequencies above the sampling frequency.
fft_red = np.fft.fft(new_red) / N
fft_green = np.fft.fft(new_green) / N
fft_red = fft_red[range(N // 2)]
fft_green = fft_green[range(N // 2)]
fft_red = abs(fft_red)
fft_green = abs(fft_green)
# Get frequency axis corresponding to the FFTs.
values = np.arange(N // 2)
timePeriod = N * sampling_interval
frequencies = values / timePeriod
# Find indices corresponding to f_bpm-0.1, f_bpm, and f_bpm+0.1,
# Where f_bpm = the ground truth BPM in Hz.
f_bpm = BPM_TRUTH / 60
bpm_index = np.abs(frequencies - f_bpm).argmin()
upper_index = np.abs(frequencies - f_bpm - 0.1).argmin()
lower_index = np.abs(frequencies - f_bpm + 0.1).argmin()
# Find the peaks of the FFTs for both color channels.
red_peak_index = np.argmax(fft_red)
red_bpm = int(frequencies[red_peak_index] * 60)
green_peak_index = np.argmax(fft_green)
green_bpm = int(frequencies[green_peak_index] * 60)
'''
Calculate SNR
'''
# Find indices corresponding to the cutoff frequencies of the bandpass filter from earlier.
lower_cutoff_index = np.abs(frequencies - LOWER_CUTOFF).argmin()
upper_cutoff_index = np.abs(frequencies - UPPER_CUTOFF).argmin()
red_signal = 0
red_noise = 0
green_signal = 0
green_noise = 0
# Iterate through all indices between the lower and upper cutoff frequencies
for x in range(lower_cutoff_index, upper_cutoff_index + 1):
# If current index's frequency is close to the ground truth BPM frequency,
# then add its power (magnitude squared) to the signal variable.
if (x >= lower_index and x <= upper_index):
red_signal = red_signal + fft_red[x]**2
green_signal = green_signal + fft_green[x]**2
# Else, add its power to the noise variable.
else:
red_noise = red_noise + fft_red[x]**2
green_noise = green_noise + fft_green[x]**2
red_snr = red_signal / red_noise
green_snr = green_signal / green_noise
print('ppg analysis done')
bpms = {'truth': BPM_TRUTH, 'red': red_bpm, 'green': green_bpm}
snrs = {'red': red_snr, 'green': green_snr}
# If desired, graph the FFTs of both color channels,
# with dots indicating the frequencies of the BPM estimates and ground truth.
if DISPLAY:
'''
plt.title('Red FFT. BPM Estimate = {},Truth = {}'.format(red_bpm, BPM_TRUTH))
plt.plot(frequencies, fft_red)
plt.ylabel('Spectral Power')
plt.xlabel('Frequency (Hz)')
plt.plot(frequencies[red_peak_index], fft_red[red_peak_index], 'ro', label='Estimate')
plt.plot(frequencies[bpm_index], fft_red[bpm_index], 'go', label='Reality')
plt.legend(loc='upper right')
plt.show()
'''
plt.title('Green FFT. BPM Estimate = {},Truth = {}'.format(
green_bpm, BPM_TRUTH))
plt.plot(frequencies, fft_green)
plt.ylabel('Spectral Power')
plt.xlabel('Frequency (Hz)')
plt.plot(frequencies[green_peak_index],
fft_green[green_peak_index],
'ro',
label='Estimate')
plt.plot(frequencies[bpm_index],
fft_green[bpm_index],
'go',
label='Reality')
plt.legend(loc='upper right')
plt.show()
# If desired, graph the results from the heart rate variability algorithm,
# with the input being the green channel signal,
# and plot the pulseox hrv for comparison.
if DISPLAY:
# PulseOx interpolation and filtering
f_pox = interp1d(timeData, pulseData, fill_value="extrapolate")
new_pox = hp.filter_signal(
f_pox(uniform_time),
cutoff=[LOWER_CUTOFF / 4, UPPER_CUTOFF],
filtertype='bandpass',
sample_rate=new_fs, #sampling_rate
order=4,
return_top=False)
# PulseOx FFT and BPM Estimation
fft_pox = abs(np.fft.fft(new_pox) / N)
fft_pox = fft_pox[range(N // 2)]
pox_bpm = int(frequencies[np.argmax(fft_pox)] * 60)
print('pulse ox bpm: {}'.format(pox_bpm))
print('ground truth: {}'.format(BPM_TRUTH))
'''
plt.plot(uniform_time, f_pox(uniform_time))
plt.show()
'''
performance_tracker = PerformanceTracker()
# Calculate + plot pulse oximeter hrv
hrv, thrv, lfcam, hfcam, lf_hfcam, BRcam, sdnncam, sdsdcam, rmssdcam = hrv_function(
new_pox, fs=int(30 * BPM_TRUTH / pox_bpm), bpm=BPM_TRUTH)
performance_tracker.track_performance()
pox_hrv = hrv
pox_thrv = thrv
print('Pulse Ox Statistics:')
print('lfcam: {:.2f}'.format(lfcam))
print('hfcam: {:.2f}'.format(hfcam))
print('lf_hfcam: {:.2f}'.format(lf_hfcam))
print('BRcam: {:.2f}'.format(BRcam))
print('sdnncam: {:.2f}'.format(sdnncam))
print('sdsdcam: {:.2f}'.format(sdsdcam))
print('rmssdcam: {:.2f}'.format(rmssdcam))
print()
print()
performance_tracker.reset()
# Calculate + plot green channel hrv
num = int(len(new_green) * pox_bpm / BPM_TRUTH)
hrv, thrv, lfcam, hfcam, lf_hfcam, BRcam, sdnncam, sdsdcam, rmssdcam = hrv_function(
new_green[:num], fs=30, bpm=green_bpm)
performance_tracker.track_performance()
print('PPG Statistics:')
print('lfcam: {:.2f}'.format(lfcam))
print('hfcam: {:.2f}'.format(hfcam))
print('lf_hfcam: {:.2f}'.format(lf_hfcam))
print('BRcam: {:.2f}'.format(BRcam))
print('sdnncam: {:.2f}'.format(sdnncam))
print('sdsdcam: {:.2f}'.format(sdsdcam))
print('rmssdcam: {:.2f}'.format(rmssdcam))
plt.title("BPM as a function of HRV Algorithm")
plt.plot(thrv / 1000, 60000 / hrv, label="ppg")
plt.plot(pox_thrv / 1000, 60000 / pox_hrv, label="pulseox")
plt.xlabel("Time Window 30s")
plt.ylabel("BPM")
plt.legend(loc="lower right")
plt.show()
'''
def main(writer):
global bpms, snrs
'''
Get/Display raw data and sampling rate.
'''
# Ignore the first second of data, since it's very different from the other data.
timeData = writer.get_time_data()[30:]
camDataRed = writer.get_cam_data_red()[30:]
camDataGreen = writer.get_cam_data_green()[30:]
pulseData = writer.get_pulseox_data()[30:]
sampling_rate = hp.get_samplerate_datetime(timeData, '%S.%f')
BPM_TRUTH = writer.get_bpm()
if DISPLAY:
plt.title("Raw PPG Data")
plt.plot(timeData, camDataRed, "-r", label="Red")
plt.plot(timeData, camDataGreen, "-g", label="Green")
plt.legend(loc="lower right")
plt.ylabel("Mean Pixel Intensity")
plt.xlabel("Time (seconds)")
plt.show()
'''
Interpolate PPG signals
'''
new_fs = 30
sampling_interval = 1 / new_fs
# Quantize time
initial_time = int(timeData[0] * new_fs) / new_fs
end_time = int(timeData[-1] * new_fs) / new_fs
# Figure out number of samples.
elapsed_time = end_time - initial_time
num_samples = int(elapsed_time * new_fs) + 1
# Generate uniform time scale and interpolation function
uniform_time = np.linspace(initial_time,
end_time,
num=num_samples,
endpoint=True)
f_red = interp1d(timeData, camDataRed, fill_value="extrapolate")
f_green = interp1d(timeData, camDataGreen, fill_value="extrapolate")
# Use interpolation function to generate wave.
new_red = f_red(uniform_time)
new_green = f_green(uniform_time)
N = len(new_red)
'''
Filter/Enhance Signals
'''
# Display the filtered PPG, print the heartpy bpm estimate
LOWER_CUTOFF = 0.7
UPPER_CUTOFF = 4
#filtered_red_ppg = hp.filter_signal(camDataRed,
new_red = hp.filter_signal(
new_red,
cutoff=[LOWER_CUTOFF, UPPER_CUTOFF],
filtertype='bandpass',
sample_rate=new_fs, #sampling_rate
order=4,
return_top=False)
#filtered_green_ppg = hp.filter_signal(camDataGreen,
new_green = hp.filter_signal(
new_green,
cutoff=[LOWER_CUTOFF, UPPER_CUTOFF],
filtertype='bandpass',
sample_rate=new_fs, #sampling_rate
order=4,
return_top=False)
if DISPLAY:
plt.title("Filtered PPG Data")
plt.plot(uniform_time, new_red, '-r', label='Red')
plt.plot(uniform_time, new_green, '-g', label='Green')
#plt.plot(timeData, filtered_red_ppg, "-r", label="Red")
#plt.plot(timeData, filtered_green_ppg, "-g", label="Green")
plt.legend(loc="lower right")
plt.ylabel("Mean Pixel Intensity")
plt.xlabel("Time (seconds)")
plt.show()
'''
Take FFT of PPGs
'''
# Take FFT of waves. Remove frequencies above the sampling frequency.
fft_red = np.fft.fft(new_red) / N
fft_green = np.fft.fft(new_green) / N
fft_red = fft_red[range(N // 2)]
fft_green = fft_green[range(N // 2)]
fft_red = abs(fft_red)
fft_green = abs(fft_green)
# Get frequency spectrum of FFTs.
values = np.arange(N // 2)
timePeriod = N * sampling_interval
frequencies = values / timePeriod
# Find indices of bpm spike.
f_bpm = BPM_TRUTH / 60
bpm_index = np.abs(frequencies - f_bpm).argmin()
upper_index = np.abs(frequencies - f_bpm - 0.1).argmin()
lower_index = np.abs(frequencies - f_bpm + 0.1).argmin()
red_peak_index = np.argmax(fft_red)
red_bpm = int(frequencies[red_peak_index] * 60)
green_peak_index = np.argmax(fft_green)
green_bpm = int(frequencies[green_peak_index] * 60)
'''
Calculate SNR
'''
lower_cutoff_index = np.abs(frequencies - LOWER_CUTOFF).argmin()
upper_cutoff_index = np.abs(frequencies - UPPER_CUTOFF).argmin()
red_signal = 0
red_noise = 0
green_signal = 0
green_noise = 0
for x in range(lower_cutoff_index, upper_cutoff_index + 1):
if (x >= lower_index and x <= upper_index):
red_signal = red_signal + fft_red[x]**2
green_signal = green_signal + fft_green[x]**2
else:
red_noise = red_noise + fft_red[x]**2
green_noise = green_noise + fft_green[x]**2
red_snr = red_signal / red_noise
green_snr = green_signal / green_noise
print('ppg analysis done')
bpms = {'truth': BPM_TRUTH, 'red': red_bpm, 'green': green_bpm}
snrs = {'red': red_snr, 'green': green_snr}
if DISPLAY:
plt.title('Red FFT. Estimate = {},Truth = {}'.format(
red_bpm, BPM_TRUTH))
plt.plot(frequencies, fft_red)
plt.ylabel('Spectral Power')
plt.xlabel('Frequency (Hz)')
plt.plot(frequencies[red_peak_index],
fft_red[red_peak_index],
'ro',
label='Estimate')
plt.plot(frequencies[bpm_index],
fft_red[bpm_index],
'go',
label='Reality')
plt.legend(loc='upper right')
plt.show()
plt.title('Green FFT. Estimate = {},Truth = {}'.format(
green_bpm, BPM_TRUTH))
plt.plot(frequencies, fft_green)
plt.ylabel('Spectral Power')
plt.xlabel('Frequency (Hz)')
plt.plot(frequencies[green_peak_index],
fft_green[green_peak_index],
'ro',
label='Estimate')
plt.plot(frequencies[bpm_index],
fft_green[bpm_index],
'go',
label='Reality')
plt.legend(loc='upper right')
plt.show()
_subsetLen = 20 # in seconds
_subsetStart = 300000 # SET
data_loaded_subset = PPG_data_loaded[_subsetStart:_subsetStart +
(_subsetLen * _sampleRate)]
plt.figure(figsize=(22, 6))
plt.plot(data_loaded_subset)
plt.show()
bandpass_low = 1
bandpass_high = 3
filtered_ppg = hp.filter_signal(data_loaded_subset.fillna(0).astype('int32'),
cutoff=[bandpass_low, bandpass_high],
filtertype='bandpass',
sample_rate=_sampleRate,
order=3,
return_top=False)
plt.figure(figsize=(22, 6))
plt.plot(filtered_ppg)
plt.show()
wd, m = hp.process(filtered_ppg,
sample_rate=_sampleRate,
high_precision=True,
clean_rr=True,
clean_rr_method='iqr')
plt.figure(figsize=(22, 6))
hp.plotter(wd, m)
