def _setIdBump(idname, xc, thetac, **kwargs):
"""
idname - name of ID in the middle of 4 BPMs. 2 BPMs each side.
xc - beam position at center of ID. [mm]
thetac - bema angle at center of ID. [mrad]
plane - 'x' or 'y'. default 'x'.
Hard coded Error if absolute value:
- bpms distance > 20.0m or,
- xc > 5mm, or
- thetac > 1mrad
TODO: fix the [mm], [mrad] default unit
"""
if np.abs(xc) > 5.0 or np.abs(thetac) > 1.0:
raise RuntimeError("xc or thetac overflow: {0}, {1}".format(
xc, thetac))
plane = kwargs.get("plane", 'x')
nbs = getNeighbors(idname, "COR", n=2)
cors = [nbs[0], nbs[1], nbs[-2], nbs[-1]]
cx0 = fget(cors, plane, unitsys=None, handle="setpoint")
# assuming each ID has two UBPM
bpmsact = getNeighbors(idname, "BPM", n=1)
if len(bpmsact) < 3:
raise RuntimeError("can not find two bounding UBPMs "
"for {0}".format(idname))
bpmsact = [bpmsact[0], bpmsact[-1]]
allbpms = getGroupMembers(["BPM", "UBPM"], op="union")
bpmsi, bpmso = getBoundedElements(allbpms, cors[0].sb, cors[-1].se)
vx0 = fget(bpmsact, plane, unitsys=None)
# sposition of bpms and ID center
s0, s1 = [(b.se + b.sb) / 2.0 for b in bpmsact]
sc = [(c.sb + c.se) / 2.0 for c in getElements(idname)][0]
L = (bpmsact[-1].se + bpmsact[-1].sb) / 2.0 - \
(bpmsact[0].se + bpmsact[0].sb) / 2.0
if L <= 0.0 or L > 20.0:
raise RuntimeError("ID BPM distance might be wrong: {0}".format(L))
x0 = xc - (sc - s0) / 1000.0 * thetac
x1 = xc + (s1 - sc) / 1000.0 * thetac
dvx = np.array([x0, x1], 'd') - vx0
dcs = meas4CorBump(cors, bpmsact, bpmso, dvx)
for i, c in enumerate(cors):
print(i, c.name, dcs[i])
c.put(plane, dcs[i] + cx0[i], unitsys=None)
def measKickedTbtData(idriver, ampl, **kwargs):
"""
take turn-by-turn BPM data after kicking the beam.
Parameters
-----------
idriver : int
which driver used to kick the beam: injection kicker 3(3) or 4(4),
vertical pinger(5), horizontal pinger(6), both H/V pingers(7).
ampl : float, tuple
kicking amplitude.
bpms : list of element objects.
provide the BPMs to take data from, default ["BPM" or "UBPM"]
count : int
number of turns.
output : str, True, False
output file name, or default (True), or no output (False)
verbose : int
it will set kicker/pinger and wait 100sec or readback-setpoint agree.
event code 47 will be used for kicker 3 and 4, 35 used for pingers.
Same returns as `getSrBpmData`
Examples
---------
>>> (name, x, y, Isum, ts, offset) = measKickedTbtData(7, (0.15, 0.2))
>>> (name, x, y, Isum, ts, offset), output = measKickedTbtData(7, (0.15, 0.2), output=True)
"""
verbose = kwargs.get("verbose", 0)
output = kwargs.get("output", True)
sleep = kwargs.get("sleep", 5)
count = kwargs.get("count", 2000)
bpms = [ b for b in kwargs.get("bpms",
getGroupMembers(["BPM", "UBPM"], op="union"))
if b.isEnabled()]
bpmstats = getBpmStatus(bpms)
kpvsp, kpvrb = None, None
# 0 - both off, 1 - V-on, 2-H-on, 3-both-on
pv_pinger_mode = "SR:C21-PS{Pinger}Mode:Trig-Sel"
if idriver in [3,4,5,6]:
if idriver in [3, 4]:
kpvsp = 'SR:IS-PS{Kick:%d}V-Sp' % idriver
kpvrb = 'SR:IS-PS{Kick:%d}Hvps-V-Rb-1st' % idriver
kpvon = 'SR:IS-PS{Kick:%d}HvpsOnOff_Cmd' % idriver
elif idriver in [5,]:
# vertical pinger
kpvsp = 'SR:C21-PS{Pinger:V}V-Sp'
kpvrb = 'SR:C21-PS{Pinger:V}Setpoint-Rb.VALA'
kpvon = 'SR:C21-PS{Pinger:V}HvpsOnOff_Cmd'
caput(pv_pinger_mode, 1)
elif idriver in [6,]:
# horizontal pinger
kpvsp = 'SR:C21-PS{Pinger:H}V-Sp'
kpvrb = 'SR:C21-PS{Pinger:H}Setpoint-Rb.VALA'
kpvon = 'SR:C21-PS{Pinger:H}HvpsOnOff_Cmd'
caput(pv_pinger_mode, 2)
#
caput(kpvsp, 0.0)
for i in range(100):
if caget(kpvrb, count=1) < 0.001: break
time.sleep(1)
caput(kpvon, 1)
elif idriver in [7,]:
# both pinger
kpvsp = ['SR:C21-PS{Pinger:H}V-Sp', 'SR:C21-PS{Pinger:V}V-Sp']
kpvrb = ['SR:C21-PS{Pinger:H}Setpoint-Rb.VALA', 'SR:C21-PS{Pinger:V}Setpoint-Rb.VALA']
kpvon = ['SR:C21-PS{Pinger:H}HvpsOnOff_Cmd', 'SR:C21-PS{Pinger:V}HvpsOnOff_Cmd']
caput(pv_pinger_mode, 3)
caput(kpvsp, [0.0, 0.0])
for i in range(100):
rb = caget(kpvrb, count=1)
if rb[0] < 0.001 and rb[1] < 0.001: break
time.sleep(0.5)
caput(kpvon, [1, 1])
# set the kicker/pinger voltage
caput(kpvsp, ampl, wait=True)
#(name, x, y, Isum, ts, offset), output = ap.nsls2.getSrBpmData(
# trig=1, count=5000, output=True, h5group="k_%d" % idriver)
h5g = "k_%d" % idriver
Idcct0 = caget('SR:C03-BI{DCCT:1}I:Total-I')
time.sleep(sleep)
# request an injection:
if idriver in [3,4,]:
resetSrBpm(bpms=bpms, evcode=47)
time.sleep(1)
caput('ACC-TS{EVG-SSC}Request-Sel', 1)
elif idriver in [5,6,7]:
resetSrBpms(bpms=bpms, evcode=35)
# do it twice
caput('SR:C21-PS{Pinger}Ping-Cmd', 1)
time.sleep(1)
caput('SR:C21-PS{Pinger}Ping-Cmd', 1)
time.sleep(2)
Idcct1 = caget('SR:C03-BI{DCCT:1}I:Total-I')
bpmdata = getSrBpmData(trig=1, bpms=bpms, count=count,
output=output, h5group=h5g)
# record pinger wave, V-chan1, H-chan2
pinger_delay, pinger_wave, pinger_mode = None, None, None
if idriver in [5,6,7]:
pinger_wave = caget(["SR:C21-PS{Dig:Png1}TimeScale-I",
"SR:C21-PS{Dig:Png1}Data:Chan2-I",
"SR:C21-PS{Dig:Png1}Data:Chan1-I"])
pinger_delay = caget(["SR:C21-PS{Pinger:H}Delay-SP",
"SR:C21-PS{Pinger:V}Delay-SP"])
pinger_mode = caget("SR:C21-PS{Pinger}Mode:Trig-Sts")
# repeat_value=True
caput(kpvon, 0)
caput(kpvsp, 0.0)
if output:
(name, x, y, Isum, ts, offset), output = bpmdata
f = h5py.File(output)
g = f[h5g]
g["I"] = Idcct1
g["I"].attrs["dI"] = Idcct1 - Idcct0
g["RF_SP"] = float(caget('RF{Osc:1}Freq:SP'))
g["RF_I"] = float(caget('RF{Osc:1}Freq:I'))
g.attrs["ampl"] = ampl
g.attrs["idriver"] = idriver
g.attrs["pvsp"] = kpvsp
g.attrs["pvrb"] = kpvrb
g.attrs["pvon"] = kpvon
if pinger_wave is not None:
g["pinger_wave"] = np.array(pinger_wave, 'd').transpose()
if pinger_delay is not None:
g["pinger_delay"] = pinger_delay
if pinger_mode is not None:
g["pinger_mode"] = pinger_mode
f.close()
# restore
restoreBpmStatus(bpmstats)
return bpmdata
def measKickedTbtData(idriver, ampl, **kwargs):
"""
take turn-by-turn BPM data after kicking the beam.
Parameters
-----------
idriver : int
which driver used to kick the beam: injection kicker 3(3) or 4(4),
vertical pinger(5), horizontal pinger(6), both H/V pingers(7).
ampl : float, tuple
kicking amplitude.
bpms : list of element objects.
provide the BPMs to take data from, default ["BPM" or "UBPM"]
count : int
number of turns.
output : str, True, False
output file name, or default (True), or no output (False)
verbose : int
it will set kicker/pinger and wait 100sec or readback-setpoint agree.
event code 47 will be used for kicker 3 and 4, 35 used for pingers.
Same returns as `getSrBpmData`
Examples
---------
>>> (name, x, y, Isum, ts, offset) = measKickedTbtData(7, (0.15, 0.2))
>>> (name, x, y, Isum, ts, offset), output = measKickedTbtData(7, (0.15, 0.2), output=True)
"""
verbose = kwargs.get("verbose", 0)
output = kwargs.get("output", True)
sleep = kwargs.get("sleep", 5)
count = kwargs.get("count", 2000)
bpms = [
b for b in kwargs.get("bpms",
getGroupMembers(["BPM", "UBPM"], op="union"))
if b.isEnabled()
]
bpmstats = getBpmStatus(bpms)
kpvsp, kpvrb = None, None
# 0 - both off, 1 - V-on, 2-H-on, 3-both-on
pv_pinger_mode = "SR:C21-PS{Pinger}Mode:Trig-Sel"
if idriver in [3, 4, 5, 6]:
if idriver in [3, 4]:
kpvsp = 'SR:IS-PS{Kick:%d}V-Sp' % idriver
kpvrb = 'SR:IS-PS{Kick:%d}Hvps-V-Rb-1st' % idriver
kpvon = 'SR:IS-PS{Kick:%d}HvpsOnOff_Cmd' % idriver
elif idriver in [
5,
]:
# vertical pinger
kpvsp = 'SR:C21-PS{Pinger:V}V-Sp'
kpvrb = 'SR:C21-PS{Pinger:V}Setpoint-Rb.VALA'
kpvon = 'SR:C21-PS{Pinger:V}HvpsOnOff_Cmd'
caput(pv_pinger_mode, 1)
elif idriver in [
6,
]:
# horizontal pinger
kpvsp = 'SR:C21-PS{Pinger:H}V-Sp'
kpvrb = 'SR:C21-PS{Pinger:H}Setpoint-Rb.VALA'
kpvon = 'SR:C21-PS{Pinger:H}HvpsOnOff_Cmd'
caput(pv_pinger_mode, 2)
#
caput(kpvsp, 0.0)
for i in range(100):
if caget(kpvrb, count=1) < 0.001: break
time.sleep(1)
caput(kpvon, 1)
elif idriver in [
7,
]:
# both pinger
kpvsp = ['SR:C21-PS{Pinger:H}V-Sp', 'SR:C21-PS{Pinger:V}V-Sp']
kpvrb = [
'SR:C21-PS{Pinger:H}Setpoint-Rb.VALA',
'SR:C21-PS{Pinger:V}Setpoint-Rb.VALA'
]
kpvon = [
'SR:C21-PS{Pinger:H}HvpsOnOff_Cmd',
'SR:C21-PS{Pinger:V}HvpsOnOff_Cmd'
]
caput(pv_pinger_mode, 3)
caput(kpvsp, [0.0, 0.0])
for i in range(100):
rb = caget(kpvrb, count=1)
if rb[0] < 0.001 and rb[1] < 0.001: break
time.sleep(0.5)
caput(kpvon, [1, 1])
# set the kicker/pinger voltage
caput(kpvsp, ampl, wait=True)
#(name, x, y, Isum, ts, offset), output = ap.nsls2.getSrBpmData(
# trig=1, count=5000, output=True, h5group="k_%d" % idriver)
h5g = "k_%d" % idriver
Idcct0 = caget('SR:C03-BI{DCCT:1}I:Total-I')
time.sleep(sleep)
# request an injection:
if idriver in [
3,
4,
]:
resetSrBpm(bpms=bpms, evcode=47)
time.sleep(1)
caput('ACC-TS{EVG-SSC}Request-Sel', 1)
elif idriver in [5, 6, 7]:
resetSrBpms(bpms=bpms, evcode=35)
# do it twice
caput('SR:C21-PS{Pinger}Ping-Cmd', 1)
time.sleep(1)
caput('SR:C21-PS{Pinger}Ping-Cmd', 1)
time.sleep(2)
Idcct1 = caget('SR:C03-BI{DCCT:1}I:Total-I')
bpmdata = getSrBpmData(trig=1,
bpms=bpms,
count=count,
output=output,
h5group=h5g)
# record pinger wave, V-chan1, H-chan2
pinger_delay, pinger_wave, pinger_mode = None, None, None
if idriver in [5, 6, 7]:
pinger_wave = caget([
"SR:C21-PS{Dig:Png1}TimeScale-I",
"SR:C21-PS{Dig:Png1}Data:Chan2-I",
"SR:C21-PS{Dig:Png1}Data:Chan1-I"
])
pinger_delay = caget(
["SR:C21-PS{Pinger:H}Delay-SP", "SR:C21-PS{Pinger:V}Delay-SP"])
pinger_mode = caget("SR:C21-PS{Pinger}Mode:Trig-Sts")
# repeat_value=True
caput(kpvon, 0)
caput(kpvsp, 0.0)
if output:
(name, x, y, Isum, ts, offset), output = bpmdata
f = h5py.File(output)
g = f[h5g]
g["I"] = Idcct1
g["I"].attrs["dI"] = Idcct1 - Idcct0
g["RF_SP"] = float(caget('RF{Osc:1}Freq:SP'))
g["RF_I"] = float(caget('RF{Osc:1}Freq:I'))
g.attrs["ampl"] = ampl
g.attrs["idriver"] = idriver
g.attrs["pvsp"] = kpvsp
g.attrs["pvrb"] = kpvrb
g.attrs["pvon"] = kpvon
if pinger_wave is not None:
g["pinger_wave"] = np.array(pinger_wave, 'd').transpose()
if pinger_delay is not None:
g["pinger_delay"] = pinger_delay
if pinger_mode is not None:
g["pinger_mode"] = pinger_mode
f.close()
# restore
restoreBpmStatus(bpmstats)
return bpmdata