def setup_scanner(hass, config, see, discovery_info=None):
"""Set up the Bluetooth Scanner."""
# pylint: disable=import-error
import bluetooth
from bt_proximity import BluetoothRSSI
def see_device(mac, name, rssi=None):
"""Mark a device as seen."""
attributes = {}
if rssi is not None:
attributes["rssi"] = rssi
see(
mac=f"{BT_PREFIX}{mac}",
host_name=name,
attributes=attributes,
source_type=SOURCE_TYPE_BLUETOOTH,
)
device_id = config.get(CONF_DEVICE_ID)
def discover_devices():
"""Discover Bluetooth devices."""
result = bluetooth.discover_devices(
duration=8,
lookup_names=True,
flush_cache=True,
lookup_class=False,
device_id=device_id,
)
_LOGGER.debug("Bluetooth devices discovered = %d", len(result))
return result
yaml_path = hass.config.path(YAML_DEVICES)
devs_to_track = []
devs_donot_track = []
# Load all known devices.
# We just need the devices so set consider_home and home range
# to 0
for device in run_coroutine_threadsafe(
async_load_config(yaml_path, hass, 0), hass.loop).result():
# Check if device is a valid bluetooth device
if device.mac and device.mac[:3].upper() == BT_PREFIX:
if device.track:
devs_to_track.append(device.mac[3:])
else:
devs_donot_track.append(device.mac[3:])
# If track new devices is true discover new devices on startup.
track_new = config.get(CONF_TRACK_NEW, DEFAULT_TRACK_NEW)
if track_new:
for dev in discover_devices():
if dev[0] not in devs_to_track and dev[0] not in devs_donot_track:
devs_to_track.append(dev[0])
see_device(dev[0], dev[1])
interval = config.get(CONF_SCAN_INTERVAL, SCAN_INTERVAL)
request_rssi = config.get(CONF_REQUEST_RSSI, False)
def update_bluetooth(_):
"""Update Bluetooth and set timer for the next update."""
update_bluetooth_once()
track_point_in_utc_time(hass, update_bluetooth,
dt_util.utcnow() + interval)
def update_bluetooth_once():
"""Lookup Bluetooth device and update status."""
try:
if track_new:
for dev in discover_devices():
if dev[0] not in devs_to_track and dev[
0] not in devs_donot_track:
devs_to_track.append(dev[0])
for mac in devs_to_track:
_LOGGER.debug("Scanning %s", mac)
result = bluetooth.lookup_name(mac, timeout=5)
rssi = None
if request_rssi:
client = BluetoothRSSI(mac)
rssi = client.request_rssi()
client.close()
if result is None:
# Could not lookup device name
continue
see_device(mac, result, rssi)
except bluetooth.BluetoothError:
_LOGGER.exception("Error looking up Bluetooth device")
def handle_update_bluetooth(call):
"""Update bluetooth devices on demand."""
update_bluetooth_once()
update_bluetooth(dt_util.utcnow())
hass.services.register(DOMAIN, "bluetooth_tracker_update",
handle_update_bluetooth)
return True
def setup_scanner(hass, config, see, discovery_info=None):
"""Set up the Bluetooth LE Scanner."""
new_devices = {}
hass.data.setdefault(DATA_BLE, {DATA_BLE_ADAPTER: None})
def handle_stop(event):
"""Try to shut down the bluetooth child process nicely."""
# These should never be unset at the point this runs, but just for
# safety's sake, use `get`.
adapter = hass.data.get(DATA_BLE, {}).get(DATA_BLE_ADAPTER)
if adapter is not None:
adapter.kill()
hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, handle_stop)
if config[CONF_TRACK_BATTERY]:
battery_track_interval = config[CONF_TRACK_BATTERY_INTERVAL]
else:
battery_track_interval = timedelta(0)
def see_device(address, name, new_device=False, battery=None):
"""Mark a device as seen."""
if name is not None:
name = name.strip("\x00")
if new_device:
if address in new_devices:
new_devices[address]["seen"] += 1
if name:
new_devices[address]["name"] = name
else:
name = new_devices[address]["name"]
_LOGGER.debug("Seen %s %s times", address, new_devices[address]["seen"])
if new_devices[address]["seen"] < MIN_SEEN_NEW:
return
_LOGGER.debug("Adding %s to tracked devices", address)
devs_to_track.append(address)
if battery_track_interval > timedelta(0):
devs_track_battery[address] = dt_util.as_utc(
datetime.fromtimestamp(0)
)
else:
_LOGGER.debug("Seen %s for the first time", address)
new_devices[address] = {"seen": 1, "name": name}
return
see(
mac=BLE_PREFIX + address,
host_name=name,
source_type=SOURCE_TYPE_BLUETOOTH_LE,
battery=battery,
)
def discover_ble_devices():
"""Discover Bluetooth LE devices."""
_LOGGER.debug("Discovering Bluetooth LE devices")
try:
adapter = pygatt.GATTToolBackend()
hass.data[DATA_BLE][DATA_BLE_ADAPTER] = adapter
devs = adapter.scan()
devices = {x["address"]: x["name"] for x in devs}
_LOGGER.debug("Bluetooth LE devices discovered = %s", devices)
except (RuntimeError, pygatt.exceptions.BLEError) as error:
_LOGGER.error("Error during Bluetooth LE scan: %s", error)
return {}
return devices
yaml_path = hass.config.path(YAML_DEVICES)
devs_to_track = []
devs_donot_track = []
devs_track_battery = {}
# Load all known devices.
# We just need the devices so set consider_home and home range
# to 0
for device in asyncio.run_coroutine_threadsafe(
async_load_config(yaml_path, hass, 0), hass.loop
).result():
# check if device is a valid bluetooth device
if device.mac and device.mac[:4].upper() == BLE_PREFIX:
address = device.mac[4:]
if device.track:
_LOGGER.debug("Adding %s to BLE tracker", device.mac)
devs_to_track.append(address)
if battery_track_interval > timedelta(0):
devs_track_battery[address] = dt_util.as_utc(
datetime.fromtimestamp(0)
)
else:
_LOGGER.debug("Adding %s to BLE do not track", device.mac)
devs_donot_track.append(address)
# if track new devices is true discover new devices
# on every scan.
track_new = config.get(CONF_TRACK_NEW)
if not devs_to_track and not track_new:
_LOGGER.warning("No Bluetooth LE devices to track!")
return False
interval = config.get(CONF_SCAN_INTERVAL, SCAN_INTERVAL)
def update_ble(now):
"""Lookup Bluetooth LE devices and update status."""
devs = discover_ble_devices()
if devs_track_battery:
adapter = hass.data[DATA_BLE][DATA_BLE_ADAPTER]
for mac in devs_to_track:
if mac not in devs:
continue
if devs[mac] is None:
devs[mac] = mac
battery = None
if (
mac in devs_track_battery
and now > devs_track_battery[mac] + battery_track_interval
):
handle = None
try:
adapter.start(reset_on_start=True)
_LOGGER.debug("Reading battery for Bluetooth LE device %s", mac)
bt_device = adapter.connect(mac)
# Try to get the handle; it will raise a BLEError exception if not available
handle = bt_device.get_handle(BATTERY_CHARACTERISTIC_UUID)
battery = ord(bt_device.char_read(BATTERY_CHARACTERISTIC_UUID))
devs_track_battery[mac] = now
except pygatt.exceptions.NotificationTimeout:
_LOGGER.warning("Timeout when trying to get battery status")
except pygatt.exceptions.BLEError as err:
_LOGGER.warning("Could not read battery status: %s", err)
if handle is not None:
# If the device does not offer battery information, there is no point in asking again later on.
# Remove the device from the battery-tracked devices, so that their battery is not wasted
# trying to get an unavailable information.
del devs_track_battery[mac]
finally:
adapter.stop()
see_device(mac, devs[mac], battery=battery)
if track_new:
for address in devs:
if address not in devs_to_track and address not in devs_donot_track:
_LOGGER.info("Discovered Bluetooth LE device %s", address)
see_device(address, devs[address], new_device=True)
track_point_in_utc_time(hass, update_ble, dt_util.utcnow() + interval)
update_ble(dt_util.utcnow())
return True
def setup_scanner(hass, config, see, discovery_info=None):
"""Set up the Bluetooth LE Scanner."""
# pylint: disable=import-error
import pygatt
new_devices = {}
hass.data.setdefault(DATA_BLE, {DATA_BLE_ADAPTER: None})
def handle_stop(event):
"""Try to shut down the bluetooth child process nicely."""
# These should never be unset at the point this runs, but just for
# safety's sake, use `get`.
adapter = hass.data.get(DATA_BLE, {}).get(DATA_BLE_ADAPTER)
if adapter is not None:
adapter.kill()
hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, handle_stop)
def see_device(address, name, new_device=False):
"""Mark a device as seen."""
if new_device:
if address in new_devices:
_LOGGER.debug("Seen %s %s times", address,
new_devices[address])
new_devices[address] += 1
if new_devices[address] >= MIN_SEEN_NEW:
_LOGGER.debug("Adding %s to tracked devices", address)
devs_to_track.append(address)
else:
return
else:
_LOGGER.debug("Seen %s for the first time", address)
new_devices[address] = 1
return
if name is not None:
name = name.strip("\x00")
see(
mac=BLE_PREFIX + address,
host_name=name,
source_type=SOURCE_TYPE_BLUETOOTH_LE,
)
def discover_ble_devices():
"""Discover Bluetooth LE devices."""
_LOGGER.debug("Discovering Bluetooth LE devices")
try:
adapter = pygatt.GATTToolBackend()
hass.data[DATA_BLE][DATA_BLE_ADAPTER] = adapter
devs = adapter.scan()
devices = {x["address"]: x["name"] for x in devs}
_LOGGER.debug("Bluetooth LE devices discovered = %s", devices)
except RuntimeError as error:
_LOGGER.error("Error during Bluetooth LE scan: %s", error)
return {}
return devices
yaml_path = hass.config.path(YAML_DEVICES)
devs_to_track = []
devs_donot_track = []
# Load all known devices.
# We just need the devices so set consider_home and home range
# to 0
for device in run_coroutine_threadsafe(
async_load_config(yaml_path, hass, 0), hass.loop).result():
# check if device is a valid bluetooth device
if device.mac and device.mac[:4].upper() == BLE_PREFIX:
if device.track:
_LOGGER.debug("Adding %s to BLE tracker", device.mac)
devs_to_track.append(device.mac[4:])
else:
_LOGGER.debug("Adding %s to BLE do not track", device.mac)
devs_donot_track.append(device.mac[4:])
# if track new devices is true discover new devices
# on every scan.
track_new = config.get(CONF_TRACK_NEW)
if not devs_to_track and not track_new:
_LOGGER.warning("No Bluetooth LE devices to track!")
return False
interval = config.get(CONF_SCAN_INTERVAL, SCAN_INTERVAL)
def update_ble(now):
"""Lookup Bluetooth LE devices and update status."""
devs = discover_ble_devices()
for mac in devs_to_track:
if mac not in devs:
continue
if devs[mac] is None:
devs[mac] = mac
see_device(mac, devs[mac])
if track_new:
for address in devs:
if address not in devs_to_track and address not in devs_donot_track:
_LOGGER.info("Discovered Bluetooth LE device %s", address)
see_device(address, devs[address], new_device=True)
track_point_in_utc_time(hass, update_ble, dt_util.utcnow() + interval)
update_ble(dt_util.utcnow())
return True