def render(draw, width, height):
percentages = psutil.cpu_percent(interval=None, percpu=True)
margin = 3
top_margin = 3
bottom_margin = 3
title_text(draw, top_margin, width, "Net: wlan0")
address = psutil.net_if_addrs()["wlan0"][0].address
counters = psutil.net_io_counters(pernic=True)["wlan0"]
draw.text((margin, 20), text=address, font=tiny_font, fill="white")
draw.text((margin, 30), text="Rx:", font=tiny_font, fill="white")
draw.text((margin, 40), text="Tx:", font=tiny_font, fill="white")
right_text(draw, 30, width, margin, text=bytes2human(counters.bytes_recv))
right_text(draw, 40, width, margin, text=bytes2human(counters.bytes_sent))
x = (width - draw.textsize("CPU Load")[0]) / 2
draw.text((x, 55), text="CPU Load", fill="yellow")
bar_height = (height - 15 - top_margin - bottom_margin) / 2
width_cpu = width / len(percentages)
bar_width = 0.5 * width_cpu
bar_margin = (width_cpu - bar_width) / 2
x = bar_margin
for cpu in percentages:
cpu_height = bar_height * (cpu / 100.0)
y2 = height - bottom_margin
vertical_bar(draw, x, y2 - bar_height - 1, x + bar_width, y2,
y2 - cpu_height)
x += width_cpu
def render(draw, width, height):
boot_time = datetime.fromtimestamp(psutil.boot_time())
elapsed = datetime.now() - boot_time
margin = 3
title_text(draw, margin, width, "Uptime")
right_text(draw,
20,
width,
margin,
text="{0} s".format(int(elapsed.total_seconds())))
def render(draw, width, height):
margin = 3
title_text(draw, margin, width, text="Net:{0}".format(interface))
try:
address = psutil.net_if_addrs()[interface][0].address
counters = psutil.net_io_counters(pernic=True)[interface]
draw.text((margin, 20), text=address, font=tiny_font, fill="white")
draw.text((margin, 35), text="Rx:", font=tiny_font, fill="white")
draw.text((margin, 45), text="Tx:", font=tiny_font, fill="white")
right_text(draw, 35, width, margin, text=bytes2human(counters.bytes_recv))
right_text(draw, 45, width, margin, text=bytes2human(counters.bytes_sent))
except:
draw.text((margin, 20), text="n/a", font=tiny_font, fill="white")
def render(draw, width, height):
boot_time = datetime.fromtimestamp(psutil.boot_time())
elapsed = datetime.now() - boot_time
margin = 3
title_text(draw, margin, width, "Uptime")
right_text(draw, 20, width, margin, text="{0} s".format(int(elapsed.total_seconds())))
if int(elapsed.total_seconds()) > 172800:
days = str(int(elapsed.total_seconds())/86400) + " days"
elif int(elapsed.total_seconds()) > 86400:
days = "1 day"
else:
days = None
if days:
right_text(draw, 35, width, margin, days)
def render_network_cpu(draw, width, height):
global input_data
if not input_data:
return
logging.info('Rendering Network and CPU...')
margin = 3
top_margin = 3
bottom_margin = 3
# Network
title_text(draw, top_margin, width,
"Net: {}".format(input_data["network"]["interface_name"]))
# interface_address = input_data["network"]["interface_address"]
ip_address = input_data["network"]["ip_address"]
# draw.text((margin, 15), text=interface_address, font=tiny_font, fill="white")
draw.text((margin, 15), text=ip_address, font=tiny_font, fill="white")
draw.text((margin, 25), text="Rx:", font=tiny_font, fill="white")
draw.text((margin, 35), text="Tx:", font=tiny_font, fill="white")
right_text(draw,
25,
width,
margin,
text=bytes2human(input_data["network"]["bytes_recv"]))
right_text(draw,
35,
width,
margin,
text=bytes2human(input_data["network"]["bytes_sent"]))
# CPU
x = (width - draw.textsize("CPU Load")[0]) / 2
draw.text((x, 45), text="CPU Load", fill="yellow")
bar_height = (height - 15 - top_margin - bottom_margin) / 1.95
width_cpu = width / len(input_data["cpu"]["cpu_percent_each"])
bar_width = 0.5 * width_cpu
bar_margin = (width_cpu - bar_width) / 1.95
cpu_percent_string = "{}%".format(str(input_data["cpu"]["cpu_percent"]))
x = (width - draw.textsize(cpu_percent_string)[0]) / 1.7
draw.text((x, 57), text=cpu_percent_string, font=tiny_font, fill="white")
x = bar_margin
for cpu in input_data["cpu"]["cpu_percent_each"]:
cpu_height = bar_height * (cpu / 100.0)
y2 = height - bottom_margin
vertical_bar(draw, x, y2 - bar_height - 1, x + bar_width, y2,
y2 - cpu_height)
x += width_cpu
def render(draw, width, height):
df = psutil.disk_usage("/")
margin = 3
title_text(draw, margin, width, text="Disk")
draw.text((margin, 20), text="Used:", font=tiny_font, fill="white")
draw.text((margin, 35), text="Free:", font=tiny_font, fill="white")
draw.text((margin, 45), text="Total:", font=tiny_font, fill="white")
right_text(draw, 20, width, margin, text="{0:0.1f}%".format(df.percent))
right_text(draw, 35, width, margin, text=bytes2human(df.free, "{0:0.0f}"))
right_text(draw, 45, width, margin, text=bytes2human(df.total, "{0:0.0f}"))
def render(draw, width, height):
mem = psutil.virtual_memory()
swap = psutil.swap_memory()
mem_used_pct = (mem.total - mem.available) * 100.0 / mem.total
margin = 3
title_text(draw, margin, width, text="Memory")
draw.text((margin, 20), text="Used:", font=tiny_font, fill="white")
draw.text((margin, 35), text="Phys:", font=tiny_font, fill="white")
draw.text((margin, 45), text="Swap:", font=tiny_font, fill="white")
right_text(draw, 20, width, margin, text="{0:0.1f}%".format(mem_used_pct))
right_text(draw, 35, width, margin, text=bytes2human(mem.used))
right_text(draw, 45, width, margin, text=bytes2human(swap.used))
def render(draw, width, height):
tFile = open('/sys/class/thermal/thermal_zone0/temp')
tempC = float(tFile.read()) / 1000
tFile.close()
fFile = open('/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq')
freqC = long(fFile.read()) / 1000
fFile.close()
margin = 3
title_text(draw, margin, width, "CPU status")
draw.text((margin, 20), text="Temp:", font=tiny_font, fill="white")
draw.text((margin, 30), text="Freq:", font=tiny_font, fill="white")
draw.text((margin, 40), text="Fan:", font=tiny_font, fill="white")
draw.text((margin, 50), text="RPM:", font=tiny_font, fill="white")
right_text(draw, 20, width, margin, text="{0:0.1f}C".format(tempC))
right_text(draw, 30, width, margin, text="{0}k".format(int(freqC)))
fan = fanOut()
fanDC, fanRPM = fan.split(" ")
if "Err" not in fanDC:
fanDC += "%"
right_text(draw, 40, width, margin, fanDC)
right_text(draw, 50, width, margin, fanRPM)
def render_disk_memory_battery(draw, width, height):
global input_data
if not input_data:
return
logging.info('Rendering Disk and Memory...')
margin = 3
# Disk
title_text(draw, margin, width, text="Disk")
draw.text((margin, 15), text="Used:", font=tiny_font, fill="white")
draw.text((margin, 25), text="Free:", font=tiny_font, fill="white")
draw.text((margin, 35), text="Total:", font=tiny_font, fill="white")
right_text(draw,
15,
width,
margin,
text="{0:0.1f}%".format(input_data["disk"]["used_pct"]))
right_text(draw,
25,
width,
margin,
text=bytes2human(input_data["disk"]["free"], "{0:0.0f}"))
right_text(draw,
35,
width,
margin,
text=bytes2human(input_data["disk"]["total"], "{0:0.0f}"))
# Memory
x = (width - draw.textsize("Memory")[0]) / 2
draw.text((x, 45), text="Memory", fill="yellow")
draw.text((margin, 57), text="Used:", font=tiny_font, fill="white")
draw.text((margin, 67), text="Phys:", font=tiny_font, fill="white")
draw.text((margin, 77), text="Swap:", font=tiny_font, fill="white")
right_text(draw,
57,
width,
margin,
text="{0:0.1f}%".format(input_data["memory"]["mem_used_pct"]))
right_text(draw,
67,
width,
margin,
text=bytes2human(input_data["memory"]["mem_used"]))
right_text(draw,
77,
width,
margin,
text=bytes2human(input_data["memory"]["swap_used"]))
# Battery
draw.text((x, 90), text="Battery", fill="yellow")
battery_pct = input_data["battery"]["battery_pct"]
draw.text((margin, 105),
text="{} %".format(battery_pct),
font=tiny_font,
fill="white")
def render(draw, width, height):
df = psutil.disk_usage("/")
margin = 3
title_text(draw, margin, width, text="Disk")
draw.text((margin, 20), text="Used:", font=tiny_font, fill="white")
draw.text((margin, 30), text="Free:", font=tiny_font, fill="white")
draw.text((margin, 40), text="Total:", font=tiny_font, fill="white")
right_text(draw, 20, width, margin, text="{0:0.1f}%".format(df.percent))
right_text(draw, 30, width, margin, text=bytes2human(df.free, "{0:0.0f}"))
right_text(draw, 40, width, margin, text=bytes2human(df.total, "{0:0.0f}"))
mem = psutil.virtual_memory()
swap = psutil.swap_memory()
mem_used_pct = (mem.total - mem.available) * 100.0 / mem.total
x = (width - draw.textsize("Memory")[0]) / 2
draw.text((x, 55), text="Memory", fill="yellow")
draw.text((margin, 75), text="Used:", font=tiny_font, fill="white")
draw.text((margin, 85), text="Phys:", font=tiny_font, fill="white")
draw.text((margin, 95), text="Swap:", font=tiny_font, fill="white")
right_text(draw, 75, width, margin, text="{0:0.1f}%".format(mem_used_pct))
right_text(draw, 85, width, margin, text=bytes2human(mem.used))
right_text(draw, 95, width, margin, text=bytes2human(swap.used))
