def setColor(r,g,b): global currentR,currentG,currentB currentR = r currentG = g currentB = b hyperion.setColor(r,g,b)
def doTemp():
fps = 30
current_millis = lambda: int(round(time.time() * 1000))
off = bytearray([0, 0, 0])
sleepTime = 0.1
myledData = bytearray()
colors = getColorArgs()
for i in range(hyperion.ledCount):
myledData += bytearray([0, 0, 0])
color = colors[0]
myledData[150] = colors[0][0]
myledData[151] = colors[0][1]
myledData[152] = colors[0][2]
myledData[180] = colors[1][0]
myledData[181] = colors[1][1]
myledData[182] = colors[1][2]
myledData[310] = colors[2][0]
myledData[311] = colors[2][1]
myledData[312] = colors[2][2]
# Start the write data loop
while not hyperion.abort():
hyperion.setColor(myledData)
time.sleep(sleepTime)
def setColor(r, g, b):
global currentR, currentG, currentB
currentR = r
currentG = g
currentB = b
hyperion.setColor(r, g, b)
def shiftLED(ledData, increment, limit, lightPos=None): state = 0 while state < limit and not hyperion.abort(): ledData = ledData[increment:] + ledData[:increment] if (lightPos): tmp = ledData[lightPos] ledData[lightPos] = light hyperion.setColor(ledData) if (lightPos): ledData[lightPos] = tmp time.sleep(sleepTime) state += 1
def shiftLED(ledData, increment, limit, lightPos=None):
state = 0
while state < limit and not hyperion.abort():
ledData = ledData[increment:] + ledData[:increment]
if (lightPos):
tmp = ledData[lightPos]
ledData[lightPos] = light
hyperion.setColor(ledData)
if (lightPos):
ledData[lightPos] = tmp
time.sleep(sleepTime)
state += 1
def runScene(self):
print "Starting led scene loop..."
#30 fps sleep time
sleepTime = 1.0 / fps
lastTime = current_millis();
while not hyperion.abort():
# hyperion.setColor(ledData[colorIndex])
# colorIndex = (colorIndex + 1) % len(ledData)
now = current_millis()
elapsed = now - lastTime
lastTime = now
self.updateObjects(elapsed)
#create a new empty scene to paint on
ledScene = bytearray()
for i in range(hyperion.ledCount):
ledScene += off
self.paintObjects(ledScene)
hyperion.setColor(ledScene)
time.sleep(sleepTime)
import hyperion, time
# Get the parameters
fadeTime = float(hyperion.args.get('fade-time', 5.0))
colorStart = hyperion.args.get('color-start', (255,174,11))
colorEnd = hyperion.args.get('color-end', (100,100,100))
color_step = (
(colorEnd[0] - colorStart[0]) / 256.0,
(colorEnd[1] - colorStart[1]) / 256.0,
(colorEnd[2] - colorStart[2]) / 256.0
)
# fade color
calcChannel = lambda i: min(max(int(colorStart[i] + color_step[i]*step),0),255)
for step in range(256):
if hyperion.abort():
break
hyperion.setColor( calcChannel(0),calcChannel(1),calcChannel(2) )
time.sleep( fadeTime / 256 )
# maintain color until effect end
hyperion.setColor(colorEnd[0],colorEnd[1],colorEnd[2])
while not hyperion.abort():
time.sleep(1)
setColor( colors[int(steps)][0],colors[int(steps)][1],colors[int(steps)][2] ) time.sleep(minStepTime) t += minStepTime # fade out if fadeOutTime > 0: setColor( colors[int(steps)][0],colors[int(steps)][1],colors[int(steps)][2] ) for step in range(int(steps),-1,-incrementOut): if hyperion.abort(): break setColor( colors[step][0],colors[step][1],colors[step][2] ) time.sleep(sleepTimeOut) # start color t = 0.0 while t<colorEndTime and not hyperion.abort(): setColor( colors[0][0],colors[0][1],colors[0][2] ) time.sleep(minStepTime) t += minStepTime # repeat if repeat > 0 and repeatCounter >= repeat : break repeatCounter += 1 time.sleep(0.5) # maintain end color until effect end while not hyperion.abort() and maintainEndCol: hyperion.setColor( currentR, currentG, currentB ) time.sleep(1)
import time
import colorsys
import socket
import errno
# Get the parameters
udpPort = int(hyperion.args.get('udpPort', 2812))
UDPSock = socket.socket(socket.AF_INET,socket.SOCK_DGRAM)
UDPSock.setblocking(False)
listen_addr = ("",udpPort)
print "udp.py: bind socket port:",udpPort
UDPSock.bind(listen_addr)
hyperion.setColor(hyperion.ledCount * bytearray((int(0), int(0), int(0))) )
# Start the write data loop
while not hyperion.abort():
try:
data,addr = UDPSock.recvfrom(4500)
# print data.strip(),len(data),addr
if (len(data)%3 == 0):
# print "numleds ",len(data)/3
ledData = bytearray()
for i in range(hyperion.ledCount):
if (i<(len(data)/3)):
ledData += data[i*3+0]
ledData += data[i*3+1]
ledData += data[i*3+2]
else:
colors[int(steps)][2])
time.sleep(minStepTime)
t += minStepTime
# fade out
if fadeOutTime > 0:
setColor(colors[int(steps)][0], colors[int(steps)][1],
colors[int(steps)][2])
for step in range(int(steps), -1, -incrementOut):
if hyperion.abort(): break
setColor(colors[step][0], colors[step][1], colors[step][2])
time.sleep(sleepTimeOut)
# start color
t = 0.0
while t < colorEndTime and not hyperion.abort():
setColor(colors[0][0], colors[0][1], colors[0][2])
time.sleep(minStepTime)
t += minStepTime
# repeat
if repeat > 0 and repeatCounter >= repeat: break
repeatCounter += 1
time.sleep(0.5)
# maintain end color until effect end
while not hyperion.abort() and maintainEndCol:
hyperion.setColor(currentR, currentG, currentB)
time.sleep(1)
for i in range(hyperion.ledCount):
hue = (baseHSVValue + hueChange * math.sin(2*math.pi * i / hyperion.ledCount)) % 1.0
rgb = colorsys.hsv_to_rgb(hue, baseHsv[1], baseHsv[2])
colorData += bytearray((int(255*rgb[0]), int(255*rgb[1]), int(255*rgb[2])))
# set correct rotation after reinitialisation of the array
colorData = colorData[-colorDataIncrement*numberOfRotates:] + colorData[:-colorDataIncrement*numberOfRotates]
baseColorChangeStepCount += 1
# Calculate new colors
for i in range(hyperion.ledCount):
amplitude = max(0.0, math.sin(-amplitudePhase + 2*math.pi * blobs * i / hyperion.ledCount))
colors[3*i+0] = int(colorData[3*i+0] * amplitude)
colors[3*i+1] = int(colorData[3*i+1] * amplitude)
colors[3*i+2] = int(colorData[3*i+2] * amplitude)
# set colors
hyperion.setColor(colors)
# increment the phase
amplitudePhase = (amplitudePhase + amplitudePhaseIncrement) % (2*math.pi)
if rotateColors:
colorData = colorData[-colorDataIncrement:] + colorData[:-colorDataIncrement]
numberOfRotates = (numberOfRotates + 1) % hyperion.ledCount
rotateColors = not rotateColors
# sleep for a while
time.sleep(sleepTime)
import hyperion
import time
import colorsys
# Get the parameters
sleepTime = float(hyperion.args.get("sleepTime", 1.0))
# Initialize the led data
ledDataOdd = bytearray()
for i in range(hyperion.ledCount):
if i % 2 == 0:
ledDataOdd += bytearray((int(255), int(0), int(0)))
else:
ledDataOdd += bytearray((int(255), int(255), int(255)))
ledDataEven = bytearray()
for i in range(hyperion.ledCount):
if i % 2 == 0:
ledDataEven += bytearray((int(255), int(255), int(255)))
else:
ledDataEven += bytearray((int(255), int(0), int(0)))
# Start the write data loop
while not hyperion.abort():
hyperion.setColor(ledDataOdd)
time.sleep(sleepTime)
hyperion.setColor(ledDataEven)
time.sleep(sleepTime)
def main():
try:
# use GPIO pin numbering convention
GPIO.setmode(GPIO.BOARD)
# set up GPIO pin for input
GPIO.setup(GPIOFrontLight, GPIO.IN)
GPIO.setup(GPIOSwitchAmbianceMode, GPIO.IN)
GPIO.setup(GPIODimmer, GPIO.IN)
GPIO.setup(GPIOFrontLight, GPIO.IN, pull_up_down = GPIO.PUD_DOWN)
GPIO.setup(GPIOSwitchAmbianceMode, GPIO.IN, pull_up_down = GPIO.PUD_DOWN)
GPIO.setup(GPIODimmer, GPIO.IN, pull_up_down = GPIO.PUD_DOWN)
frontLightStatus = 0 # 0 = off , 1 = on
ambianceLightStatus = 0 # 0 = off, 1 = on
ambianceMode = 0 # 0 = normal ambiance light , 1 = tv ambiance mode
dimmerValue = 10 # 0 to 10
UDP_IP = ""
UDP_PORT = 8888
sock = socket.socket(socket.AF_INET, # Internet
socket.SOCK_DGRAM) # UDP
sock.bind((UDP_IP, UDP_PORT))
sock.settimeout(0.3)
ledDataWandOn = bytearray()
ledDataLampenOn = bytearray()
ledDataWandOff = bytearray()
ledDataLampenOff = bytearray()
hsv = colorsys.rgb_to_hsv(250/255.0, 1.0, 158.0/255.0)
hsvFront = colorsys.rgb_to_hsv(250.0/255.0, 1.0, 158.0/255.0)
for i in range(1,152):
rgb = colorsys.hsv_to_rgb(hsv[0], hsv[1]*2, 1)
ledDataWandOn += bytearray((int(rgb[0]*255), int(rgb[1]*255), int(rgb[2]*255)))
ledDataWandOff += bytearray((0,0,0))
for i in range(1,61):
rgb = colorsys.hsv_to_rgb(hsvFront[0], hsvFront[1]*2, hsvFront[2])
ledDataLampenOn += bytearray((int(rgb[0]*255), int(rgb[1]*255), int(rgb[2]*255)))
ledDataLampenOff += bytearray((0,0,0))
while not hyperion.abort():
# get GPIO value
if GPIO.input(GPIOSwitchAmbianceMode) and ambianceMode <> 1:
ambianceMode = 1
time.sleep(0.2)
print("Button 2 pressed")
if not GPIO.input(GPIOSwitchAmbianceMode) and ambianceMode <> 0:
ambianceMode = 0
ambianceLightStatus = 0
time.sleep(0.2)
print("Button 2 released")
if GPIO.input(GPIOFrontLight) and frontLightStatus <> 1:
frontLightStatus = 1
time.sleep(0.2)
print("Button 1 pressed")
if not GPIO.input(GPIOFrontLight) and frontLightStatus <> 0:
frontLightStatus = 0
time.sleep(0.2)
print("Button 1 released")
if GPIO.input(GPIODimmer):
print("DIMMER 1")
timeCounter = 0
if GPIO.input(GPIODimmer) and ambianceLightStatus == 0:
print("Light on")
ambianceLightStatus = 1
ledData = ledDataWandOn
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
time.sleep(0.4)
while GPIO.input(GPIODimmer):
timeCounter = timeCounter + 1
print("TIME COUNTER")
if timeCounter > 10:
ambianceLightStatus = 0
ledData = ledDataWandOff
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
# print("Light off")
time.sleep(0.1)
if ambianceLightStatus == 1 and timeCounter <=10:
print("DIMMING")
ledDataWandOn = bytearray()
dimmerValue = dimmerValue - 1
if dimmerValue == -1:
dimmerValue = 10
for i in range(1,152):
rgb = colorsys.hsv_to_rgb(hsv[0], hsv[1]*2, dimmerValue/10.0)
ledDataWandOn += bytearray((int(rgb[0]*255), int(rgb[1]*255), int(rgb[2]*255)))
print("Dimmdone")
ledData = bytearray()
sleepTime = 0.1
if ambianceMode == 1:
srgb = bytearray(152*3)
try:
number,addr = sock.recvfrom_into(srgb) # buffer size is
ledDataServer = bytearray()
for i in range(1, number-3, 3):
ledDataServer += bytearray((srgb[i+2], srgb[i], srgb[i+1]))
ledData = ledData + ledDataServer
sleepTime = 0.01
except socket.timeout:
ledData = ledData + ledDataWandOff
else:
if ambianceLightStatus == 1:
ledData = ledData + ledDataWandOn
else:
ledData = ledData + ledDataWandOff
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
# wait 100ms
time.sleep(sleepTime)
# reset GPIO settings if user pressed Ctrl+C
except KeyboardInterrupt:
print("Execution stopped by user")
GPIO.cleanup()
"step": 7,
"lvl": lvl
},
{
"pos": 1,
"step": 8,
"lvl": lvl
},
{
"pos": 2,
"step": 9,
"lvl": lvl
},
#{ "pos":0, "step":10, "lvl":lvl},
#{ "pos":1, "step":11, "lvl":lvl},
#{ "pos":2, "step":12, "lvl":lvl},
]
# Start the write data loop
counter = 0
while not hyperion.abort():
counter += 1
for r in runners:
if counter % r["step"] == 0:
ledData[r["pos"]] = whiteLevel
r["pos"] = (r["pos"] + 3) % (hyperion.ledCount * 3)
ledData[r["pos"]] = r["lvl"]
hyperion.setColor(ledData)
time.sleep(sleepTime)
ledDataBuf = ledData[:]
for i, v in enumerate(projectiles):
projectiles[i][0] = projectiles[i][0] + projectiles[i][1]
for t in range(0, trailLength):
pixel = v[0] - v[1] * t
if pixel + 2 < 0:
pixel += hyperion.ledCount
if pixel + 2 > hyperion.ledCount - 1:
pixel -= hyperion.ledCount - 1
rgb = colorsys.hsv_to_rgb(v[2], 1,
(trailLength - 1.0 * t) / trailLength)
ledDataBuf[3 * pixel] = int(255 * rgb[0])
ledDataBuf[3 * pixel + 1] = int(255 * rgb[1])
ledDataBuf[3 * pixel + 2] = int(255 * rgb[2])
hyperion.setColor(ledDataBuf[-increment:] + ledDataBuf[:-increment])
for i1, p1 in enumerate(projectiles):
for i2, p2 in enumerate(projectiles):
if (p1 is not p2):
prev1 = p1[0] - p1[1]
prev2 = p2[0] - p2[1]
if (prev1 - prev2 < 0) != (p1[0] - p2[0] < 0):
for d in range(0, explodeRadius):
for pixel in range(p1[0] - d, p1[0] + d):
rgb = colorsys.hsv_to_rgb(
random.choice([p1[2], p2[2]]), 1,
(1.0 * explodeRadius - d) / explodeRadius)
ledDataBuf[3 * pixel] = int(255 * rgb[0])
ledDataBuf[3 * pixel + 1] = int(255 * rgb[1])
ledDataBuf[3 * pixel + 2] = int(255 * rgb[2])
import hyperion, time
# Get the rotation time
color = hyperion.args.get('color', (255,255,255))
frequency = float(hyperion.args.get('frequency', 10.0))
# Check parameters
frequency = min(100.0, frequency)
# Compute the strobe interval
sleepTime = 0.5 / frequency
# Start the write data loop
while not hyperion.abort():
hyperion.setColor(0, 0, 0)
time.sleep(sleepTime)
hyperion.setColor(color[0], color[1], color[2])
time.sleep(sleepTime)
import hyperion, time, colorsys
# Get the parameters
rotationTime = float(hyperion.args.get('rotation-time', 30.0))
brightness = float(hyperion.args.get('brightness', 100))/100.0
saturation = float(hyperion.args.get('saturation', 100))/100.0
reverse = bool(hyperion.args.get('reverse', False))
# Calculate the sleep time and hue increment
sleepTime = 0.1
hueIncrement = sleepTime / rotationTime
# Switch direction if needed
if reverse:
increment = -increment
# Start the write data loop
hue = 0.0
while not hyperion.abort():
rgb = colorsys.hsv_to_rgb(hue, saturation, brightness)
hyperion.setColor(int(255*rgb[0]), int(255*rgb[1]), int(255*rgb[2]))
hue = (hue + hueIncrement) % 1.0
time.sleep(sleepTime)
colorIndex = 0
currentColorCount = 0
currentGapCount = 0
fillingBulb = 1
for i in range(hyperion.ledCount):
if fillingBulb:
ledStart = i*3
ledData[colorIndex][ledStart] = colors[colorIndex][0]
ledData[colorIndex][ledStart+1] = colors[colorIndex][1]
ledData[colorIndex][ledStart+2] = colors[colorIndex][2]
currentColorCount += 1
if currentColorCount == bulbSize:
currentColorCount = 0
if currentGapCount < gapWidth:
fillingBulb = 0
colorIndex += 1
colorIndex = colorIndex % len(colors)
else:
currentGapCount += 1
if currentGapCount == gapWidth:
fillingBulb = 1
currentGapCount = 0
# Start the write data loop
# switch led array every wake time to go to next color set
colorIndex = 0
while not hyperion.abort():
hyperion.setColor(ledData[colorIndex])
colorIndex = (colorIndex + 1) % len(ledData)
time.sleep(interval)
import hyperion, time
# Get the parameters
fadeTime = float(hyperion.args.get('fade-time', 5.0))
colorStart = hyperion.args.get('color-start', (255, 174, 11))
colorEnd = hyperion.args.get('color-end', (100, 100, 100))
color_step = ((colorEnd[0] - colorStart[0]) / 256.0,
(colorEnd[1] - colorStart[1]) / 256.0,
(colorEnd[2] - colorStart[2]) / 256.0)
# fade color
calcChannel = lambda i: min(max(int(colorStart[i] + color_step[i] * step), 0),
255)
for step in range(256):
if hyperion.abort():
break
hyperion.setColor(calcChannel(0), calcChannel(1), calcChannel(2))
time.sleep(fadeTime / 256)
# maintain color until effect end
hyperion.setColor(colorEnd[0], colorEnd[1], colorEnd[2])
while not hyperion.abort():
time.sleep(1)
import hyperion
import time
import colorsys
# Get the rotation time
color = hyperion.args.get('color', (255,255,255))
frequency = float(hyperion.args.get('frequency', 10.0))
# Check parameters
frequency = min(100.0, frequency)
# Compute the strobe interval
sleepTime = 1.0 / frequency
# Initialize the led data
blackLedsData = bytearray(hyperion.ledCount * ( 0, 0, 0))
whiteLedsData = bytearray(hyperion.ledCount * color)
# Start the write data loop
while not hyperion.abort():
hyperion.setColor(blackLedsData)
time.sleep(sleepTime)
hyperion.setColor(whiteLedsData)
time.sleep(sleepTime)
sleepTime = 0.2
random.seed(time.time())
baseHsv = [0.0, 0.0, 1.0]
while not hyperion.abort():
# Move the hue and saturation randomly.
# random between -1.0 and 1.0
ran = ((random.random() * 2) - 1)
baseHsv[0] += ran * hue_increment * change_speed + hue_tendency
baseHsv[0] %= 1.0
# random between -1.0 and 1.0
ran = ((random.random() * 2) - 1)
saturation = baseHsv[1] + ran * sat_increment * change_speed
# clamp between min and max
baseHsv[1] = max(saturation_min, min(saturation_max, saturation))
rgb = colorsys.hsv_to_rgb(baseHsv[0], baseHsv[1], baseHsv[2])
# set colors
led_data = bytearray()
for i in range(hyperion.ledCount):
led_data += bytearray((int(255*rgb[0]), int(255*rgb[1]), int(255*rgb[2])))
hyperion.setColor(led_data)
# sleep for a while
time.sleep(sleepTime)
print baseHsv
# Get the parameters
sleepTime = float(hyperion.args.get('sleepTime', 1000)) / 1000.0
length = hyperion.args.get('length', 1)
color1 = hyperion.args.get('color1', (255, 255, 255))
color2 = hyperion.args.get('color2', (255, 0, 0))
# Initialize the led data
i = 0
ledDataOdd = bytearray()
while i < hyperion.ledCount:
for l in range(length):
if i < hyperion.ledCount:
ledDataOdd += bytearray(
(int(color1[0]), int(color1[1]), int(color1[2])))
i += 1
for l in range(length):
if i < hyperion.ledCount:
ledDataOdd += bytearray(
(int(color2[0]), int(color2[1]), int(color2[2])))
i += 1
ledDataEven = ledDataOdd[3 * length:] + ledDataOdd[0:3 * length]
# Start the write data loop
while not hyperion.abort():
hyperion.setColor(ledDataOdd)
time.sleep(sleepTime)
hyperion.setColor(ledDataEven)
time.sleep(sleepTime)
def main():
try:
# use GPIO pin numbering convention
GPIO.setmode(GPIO.BOARD)
# set up GPIO pin for input
GPIO.setup(GPIOFrontLight, GPIO.IN)
GPIO.setup(GPIOSwitchAmbianceMode, GPIO.IN)
GPIO.setup(GPIODimmer, GPIO.IN)
GPIO.setup(GPIOFrontLight, GPIO.IN, pull_up_down = GPIO.PUD_DOWN)
GPIO.setup(GPIOSwitchAmbianceMode, GPIO.IN, pull_up_down = GPIO.PUD_DOWN)
GPIO.setup(GPIODimmer, GPIO.IN, pull_up_down = GPIO.PUD_DOWN)
frontLightStatus = 0 # 0 = off , 1 = on
ambianceLightStatus = 0 # 0 = off, 1 = on
ambianceMode = 0 # 0 = normal ambiance light , 1 = tv ambiance mode
dimmerValue = 1 # 0 to 10
ledDataWandOn = bytearray()
ledDataLampenOn = bytearray()
ledDataWandOff = bytearray()
ledDataLampenOff = bytearray()
hsv = colorsys.rgb_to_hsv(250/255.0, 1.0, 158.0/255.0)
hsvFront = colorsys.rgb_to_hsv(250.0/255.0, 1.0, 158.0/255.0)
for i in range(1,151):
rgb = colorsys.hsv_to_rgb(hsv[0], hsv[1]*2, 1)
ledDataWandOn += bytearray((int(rgb[0]*255), int(rgb[1]*255), int(rgb[2]*255)))
ledDataWandOff += bytearray((0,0,0))
for i in range(1,62):
rgb = colorsys.hsv_to_rgb(hsvFront[0], hsvFront[1]*2, hsvFront[2])
ledDataLampenOn += bytearray((int(rgb[0]*255), int(rgb[1]*255), int(rgb[2]*255)))
ledDataLampenOff += bytearray((0,0,0))
while not hyperion.abort():
# get GPIO value
if GPIO.input(GPIOSwitchAmbianceMode) and ambianceMode <> 1:
ambianceMode = 1
# print("Button 2 pressed")
if not GPIO.input(GPIOSwitchAmbianceMode) and ambianceMode <> 0:
ambianceMode = 0
# print("Button 2 released")
if GPIO.input(GPIOFrontLight) and frontLightStatus <> 1:
frontLightStatus = 1
# print("Button 1 pressed")
if not GPIO.input(GPIOFrontLight) and frontLightStatus <> 0:
frontLightStatus = 0
# print("Button 1 released")
if GPIO.input(GPIODimmer):
# print("DIMMER 1")
timeCounter = 0
if GPIO.input(GPIODimmer) and ambianceLightStatus == 0:
# print("Light on")
ambianceLightStatus = 1
ledData = ledDataWandOn
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
time.sleep(0.4)
while GPIO.input(GPIODimmer):
timeCounter = timeCounter + 1
# print("TIME COUNTER")
if timeCounter > 10:
ambianceLightStatus = 0
ledData = ledDataWandOff
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
# print("Light off")
time.sleep(0.1)
if ambianceLightStatus == 1 and timeCounter <=10:
# print("DIMMING")
ledDataWandOn = bytearray()
dimmerValue = dimmerValue + 1
if dimmerValue == 11:
dimmerValue = 1
for i in range(1,151):
rgb = colorsys.hsv_to_rgb(hsv[0], hsv[1], dimmerValue/10.0)
ledDataWandOn += bytearray((int(rgb[0]*255), int(rgb[1]*255), int(rgb[2]*255)))
# print("Dimmdone")
ledData = bytearray()
if ambianceLightStatus == 1:
ledData = ledData + ledDataWandOn
else:
ledData = ledData + ledDataWandOff
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
# wait 100ms
time.sleep(0.1)
# reset GPIO settings if user pressed Ctrl+C
except KeyboardInterrupt:
print("Execution stopped by user")
GPIO.cleanup()
hsv1 = list(
colorsys.rgb_to_hsv(rgb1[0] / 255.0, rgb1[1] / 255.0, rgb1[2] / 255.0))
hsv2 = list(
colorsys.rgb_to_hsv(rgb2[0] / 255.0, rgb2[1] / 255.0, rgb2[2] / 255.0))
""" The effect loop """
while not hyperion.abort():
""" The algorithm to calculate the change in color """
led_data = bytearray()
blend_percantages_rotated = blend_percantages[
-1 * int(rotation):] + blend_percantages[:-1 * int(rotation)]
for i in range(hyperion.ledCount):
blend = blend_function(rgb1, rgb2, blend_percantages_rotated[i])
led_data += bytearray((int(blend[0]), int(blend[1]), int(blend[2])))
""" send the data to hyperion """
hyperion.setColor(led_data)
""" do any other stuff that needs to be done afterwards """
# set rotation
rotation = (rotation + rotation_speed) % hyperion.ledCount
# change colors
# change hue
hsv1[0] = (hsv1[0] + color1_change) % 1.0
hsv2[0] = (hsv2[0] + color2_change) % 1.0
# convert to rgb
rgb1 = list(colorsys.hsv_to_rgb(hsv1[0], hsv1[1], hsv1[2]))
rgb2 = colorsys.hsv_to_rgb(hsv2[0], hsv2[1], hsv2[2])
# convert rgb 0..1 to rgb 0..255
rgb1 = [int(c * 255) for c in rgb1]
rgb2 = [int(c * 255) for c in rgb2]
""" sleep for a while """
method = locals()[method]
red = partial(method,
b=color_start[0],
c=color_end[0] - color_start[0],
d=duration)
green = partial(method,
b=color_start[1],
c=color_end[1] - color_start[1],
d=duration)
blue = partial(method,
b=color_start[2],
c=color_end[2] - color_start[2],
d=duration)
start = time.time()
prev_color = None
while not hyperion.abort():
current = time.time() - start
color = (red(current), green(current), blue(current))
if color != prev_color:
#print(color)
hyperion.setColor(*color)
prev_color = color
time.sleep(interval)
if current >= duration:
break
hyperion.setColor(color_end[0], color_end[1], color_end[2])
while not hyperion.abort() and maintain_color:
time.sleep(1)
import hyperion
import time
import colorsys
# Get the parameters
rotationTime = float(hyperion.args.get('rotation-time', 30.0))
brightness = float(hyperion.args.get('brightness', 1.0))
saturation = float(hyperion.args.get('saturation', 1.0))
reverse = bool(hyperion.args.get('reverse', False))
# Check parameters
rotationTime = max(0.1, rotationTime)
brightness = max(0.0, min(brightness, 1.0))
saturation = max(0.0, min(saturation, 1.0))
# Calculate the sleep time and hue increment
sleepTime = 0.1
hueIncrement = sleepTime / rotationTime
# Switch direction if needed
if reverse:
increment = -increment
# Start the write data loop
hue = 0.0
while not hyperion.abort():
rgb = colorsys.hsv_to_rgb(hue, saturation, brightness)
hyperion.setColor(int(255 * rgb[0]), int(255 * rgb[1]), int(255 * rgb[2]))
hue = (hue + hueIncrement) % 1.0
time.sleep(sleepTime)
sleepTime = float(hyperion.args.get('speed', 1.0))*0.5
alarmColor = hyperion.args.get('alarm-color', (255,0,0))
postColor = hyperion.args.get('post-color', (255,174,11))
off = bool(hyperion.args.get('shutdown-enabled', False))
width = 12
height = 10
imageData = bytearray(height * width * (0,0,0))
# Start the write data loop
for i in range(6):
if hyperion.abort():
off = False
break
if i % 2:
hyperion.setColor(alarmColor[0], alarmColor[1], alarmColor[2])
else:
hyperion.setColor(0, 0, 0)
time.sleep(sleepTime)
for y in range(height,0,-1):
if hyperion.abort():
off = False
break
for x in range(width):
setPixel(x, y-1, alarmColor)
hyperion.setImage(width, height, imageData)
time.sleep(sleepTime)
time.sleep(1)
for y in range(height):
def main():
try:
# use GPIO pin numbering convention
GPIO.setmode(GPIO.BOARD)
# set up GPIO pin for input
GPIO.setup(GPIOFrontLight, GPIO.IN)
GPIO.setup(GPIOSwitchAmbianceMode, GPIO.IN)
GPIO.setup(GPIODimmer, GPIO.IN)
GPIO.setup(GPIOFrontLight, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(GPIOSwitchAmbianceMode, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(GPIODimmer, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
frontLightStatus = 0 # 0 = off , 1 = on
ambianceLightStatus = 0 # 0 = off, 1 = on
ambianceMode = 0 # 0 = normal ambiance light , 1 = tv ambiance mode
dimmerValue = 1 # 0 to 10
ledDataWandOn = bytearray()
ledDataLampenOn = bytearray()
ledDataWandOff = bytearray()
ledDataLampenOff = bytearray()
hsv = colorsys.rgb_to_hsv(250 / 255.0, 1.0, 158.0 / 255.0)
hsvFront = colorsys.rgb_to_hsv(250.0 / 255.0, 1.0, 158.0 / 255.0)
for i in range(1, 151):
rgb = colorsys.hsv_to_rgb(hsv[0], hsv[1] * 2, 1)
ledDataWandOn += bytearray(
(int(rgb[0] * 255), int(rgb[1] * 255), int(rgb[2] * 255)))
ledDataWandOff += bytearray((0, 0, 0))
for i in range(1, 62):
rgb = colorsys.hsv_to_rgb(hsvFront[0], hsvFront[1] * 2,
hsvFront[2])
ledDataLampenOn += bytearray(
(int(rgb[0] * 255), int(rgb[1] * 255), int(rgb[2] * 255)))
ledDataLampenOff += bytearray((0, 0, 0))
while not hyperion.abort():
# get GPIO value
if GPIO.input(GPIOSwitchAmbianceMode) and ambianceMode <> 1:
ambianceMode = 1
# print("Button 2 pressed")
if not GPIO.input(GPIOSwitchAmbianceMode) and ambianceMode <> 0:
ambianceMode = 0
# print("Button 2 released")
if GPIO.input(GPIOFrontLight) and frontLightStatus <> 1:
frontLightStatus = 1
# print("Button 1 pressed")
if not GPIO.input(GPIOFrontLight) and frontLightStatus <> 0:
frontLightStatus = 0
# print("Button 1 released")
if GPIO.input(GPIODimmer):
# print("DIMMER 1")
timeCounter = 0
if GPIO.input(GPIODimmer) and ambianceLightStatus == 0:
# print("Light on")
ambianceLightStatus = 1
ledData = ledDataWandOn
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
time.sleep(0.4)
while GPIO.input(GPIODimmer):
timeCounter = timeCounter + 1
# print("TIME COUNTER")
if timeCounter > 10:
ambianceLightStatus = 0
ledData = ledDataWandOff
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
# print("Light off")
time.sleep(0.1)
if ambianceLightStatus == 1 and timeCounter <= 10:
# print("DIMMING")
ledDataWandOn = bytearray()
dimmerValue = dimmerValue + 1
if dimmerValue == 11:
dimmerValue = 1
for i in range(1, 151):
rgb = colorsys.hsv_to_rgb(hsv[0], hsv[1],
dimmerValue / 10.0)
ledDataWandOn += bytearray(
(int(rgb[0] * 255), int(rgb[1] * 255),
int(rgb[2] * 255)))
# print("Dimmdone")
ledData = bytearray()
if ambianceLightStatus == 1:
ledData = ledData + ledDataWandOn
else:
ledData = ledData + ledDataWandOff
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
# wait 100ms
time.sleep(0.1)
# reset GPIO settings if user pressed Ctrl+C
except KeyboardInterrupt:
print("Execution stopped by user")
GPIO.cleanup()
ledData0 += bytearray((int(255), int(255), int(255))) if i%3 == 2: ledData0 += bytearray((int(0), int(255), int(0))) ledData1 = bytearray() for i in range(hyperion.ledCount): if i%3 == 0: ledData1 += bytearray((int(255), int(255), int(255))) if i%3 == 1: ledData1 += bytearray((int(0), int(255), int(0))) if i%3 == 2: ledData1 += bytearray((int(255), int(0), int(0))) ledData2 = bytearray() for i in range(hyperion.ledCount): if i%3 == 0: ledData2 += bytearray((int(0), int(255), int(0))) if i%3 == 1: ledData2 += bytearray((int(255), int(0), int(0))) if i%3 == 2: ledData2 += bytearray((int(255), int(255), int(255))) # Start the write data loop while not hyperion.abort(): hyperion.setColor(ledData0) time.sleep(sleepTime) hyperion.setColor(ledData1) time.sleep(sleepTime) hyperion.setColor(ledData2) time.sleep(sleepTime)
percentage = max(1, min(percentage, 100))
# Process parameters
factor = percentage / 100.0
hsv = colorsys.rgb_to_hsv(color[0] / 255.0, color[1] / 255.0, color[2] / 255.0)
# Initialize the led data
snakeLeds = max(1, int(hyperion.ledCount * factor))
ledData = bytearray()
for i in range(hyperion.ledCount - snakeLeds):
ledData += bytearray((0, 0, 0))
for i in range(1, snakeLeds + 1):
rgb = colorsys.hsv_to_rgb(hsv[0], hsv[1], hsv[2] / i)
ledData += bytearray((int(rgb[0] * 255), int(rgb[1] * 255), int(rgb[2] * 255)))
# Calculate the sleep time and rotation increment
increment = 3
sleepTime = rotationTime / hyperion.ledCount
while sleepTime < 0.05:
increment *= 2
sleepTime *= 2
increment %= hyperion.ledCount
# Start the write data loop
while not hyperion.abort():
hyperion.setColor(ledData)
ledData = ledData[increment:] + ledData[:increment]
time.sleep(sleepTime)
import hyperion, time
# Get the rotation time
color = hyperion.args.get('color', (255, 255, 255))
frequency = float(hyperion.args.get('frequency', 10.0))
# Check parameters
frequency = min(100.0, frequency)
# Compute the strobe interval
sleepTime = 1.0 / frequency
# Start the write data loop
while not hyperion.abort():
hyperion.setColor(0, 0, 0)
time.sleep(sleepTime)
hyperion.setColor(color[0], color[1], color[2])
time.sleep(sleepTime)
-colorDataIncrement *
numberOfRotates:] + colorData[:-colorDataIncrement *
numberOfRotates]
baseColorChangeStepCount += 1
# Calculate new colors
for i in range(hyperion.ledCount):
amplitude = max(
0.0,
math.sin(-amplitudePhase +
2 * math.pi * blobs * i / hyperion.ledCount))
colors[3 * i + 0] = int(colorData[3 * i + 0] * amplitude)
colors[3 * i + 1] = int(colorData[3 * i + 1] * amplitude)
colors[3 * i + 2] = int(colorData[3 * i + 2] * amplitude)
# set colors
hyperion.setColor(colors)
# increment the phase
amplitudePhase = (amplitudePhase + amplitudePhaseIncrement) % (2 * math.pi)
if rotateColors:
colorData = colorData[
-colorDataIncrement:] + colorData[:-colorDataIncrement]
numberOfRotates = (numberOfRotates + 1) % hyperion.ledCount
rotateColors = not rotateColors
# sleep for a while
time.sleep(sleepTime)
def main():
try:
# use GPIO pin numbering convention
GPIO.setmode(GPIO.BOARD)
# set up GPIO pin for input
GPIO.setup(GPIOFrontLight, GPIO.IN)
GPIO.setup(GPIOSwitchAmbianceMode, GPIO.IN)
GPIO.setup(GPIODimmer, GPIO.IN)
GPIO.setup(GPIOFrontLight, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(GPIOSwitchAmbianceMode, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(GPIODimmer, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
frontLightStatus = 0 # 0 = off , 1 = on
ambianceLightStatus = 0 # 0 = off, 1 = on
ambianceMode = 0 # 0 = normal ambiance light , 1 = tv ambiance mode
dimmerValue = 10 # 0 to 10
UDP_IP = ""
UDP_PORT = 8888
sock = socket.socket(
socket.AF_INET, # Internet
socket.SOCK_DGRAM) # UDP
sock.bind((UDP_IP, UDP_PORT))
sock.settimeout(0.3)
ledDataWandOn = bytearray()
ledDataLampenOn = bytearray()
ledDataWandOff = bytearray()
ledDataLampenOff = bytearray()
hsv = colorsys.rgb_to_hsv(250 / 255.0, 1.0, 158.0 / 255.0)
hsvFront = colorsys.rgb_to_hsv(250.0 / 255.0, 1.0, 158.0 / 255.0)
for i in range(1, 152):
rgb = colorsys.hsv_to_rgb(hsv[0], hsv[1] * 2, 1)
ledDataWandOn += bytearray(
(int(rgb[0] * 255), int(rgb[1] * 255), int(rgb[2] * 255)))
ledDataWandOff += bytearray((0, 0, 0))
for i in range(1, 61):
rgb = colorsys.hsv_to_rgb(hsvFront[0], hsvFront[1] * 2,
hsvFront[2])
ledDataLampenOn += bytearray(
(int(rgb[0] * 255), int(rgb[1] * 255), int(rgb[2] * 255)))
ledDataLampenOff += bytearray((0, 0, 0))
while not hyperion.abort():
# get GPIO value
if GPIO.input(GPIOSwitchAmbianceMode) and ambianceMode <> 1:
ambianceMode = 1
time.sleep(0.2)
print("Button 2 pressed")
if not GPIO.input(GPIOSwitchAmbianceMode) and ambianceMode <> 0:
ambianceMode = 0
ambianceLightStatus = 0
time.sleep(0.2)
print("Button 2 released")
if GPIO.input(GPIOFrontLight) and frontLightStatus <> 1:
frontLightStatus = 1
time.sleep(0.2)
print("Button 1 pressed")
if not GPIO.input(GPIOFrontLight) and frontLightStatus <> 0:
frontLightStatus = 0
time.sleep(0.2)
print("Button 1 released")
if GPIO.input(GPIODimmer):
print("DIMMER 1")
timeCounter = 0
if GPIO.input(GPIODimmer) and ambianceLightStatus == 0:
print("Light on")
ambianceLightStatus = 1
ledData = ledDataWandOn
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
time.sleep(0.4)
while GPIO.input(GPIODimmer):
timeCounter = timeCounter + 1
print("TIME COUNTER")
if timeCounter > 10:
ambianceLightStatus = 0
ledData = ledDataWandOff
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
# print("Light off")
time.sleep(0.1)
if ambianceLightStatus == 1 and timeCounter <= 10:
print("DIMMING")
ledDataWandOn = bytearray()
dimmerValue = dimmerValue - 1
if dimmerValue == -1:
dimmerValue = 10
for i in range(1, 152):
rgb = colorsys.hsv_to_rgb(hsv[0], hsv[1] * 2,
dimmerValue / 10.0)
ledDataWandOn += bytearray(
(int(rgb[0] * 255), int(rgb[1] * 255),
int(rgb[2] * 255)))
print("Dimmdone")
ledData = bytearray()
sleepTime = 0.1
if ambianceMode == 1:
srgb = bytearray(152 * 3)
try:
number, addr = sock.recvfrom_into(srgb) # buffer size is
ledDataServer = bytearray()
for i in range(1, number - 3, 3):
ledDataServer += bytearray(
(srgb[i + 2], srgb[i], srgb[i + 1]))
ledData = ledData + ledDataServer
sleepTime = 0.01
except socket.timeout:
ledData = ledData + ledDataWandOff
else:
if ambianceLightStatus == 1:
ledData = ledData + ledDataWandOn
else:
ledData = ledData + ledDataWandOff
if frontLightStatus == 1:
ledData = ledData + ledDataLampenOn
else:
ledData = ledData + ledDataLampenOff
hyperion.setColor(ledData)
# wait 100ms
time.sleep(sleepTime)
# reset GPIO settings if user pressed Ctrl+C
except KeyboardInterrupt:
print("Execution stopped by user")
GPIO.cleanup()
