def test_attach_detach_multiple_rar_tcp_data(self):
""" attach + send two ReAuth Reqs to session manager with a"""
""" single UE + send TCP data + detach"""
""" Verify that the data is sent on 2nd dedicated bearer as it has"""
""" matching PFs and higher priority"""
num_ues = 1
detach_type = [
s1ap_types.ueDetachType_t.UE_NORMAL_DETACH.value,
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value,
]
wait_for_s1 = [True, False]
self._s1ap_wrapper.configUEDevice(num_ues)
datapath = get_datapath()
MAX_NUM_RETRIES = 5
gtp_br_util = GTPBridgeUtils()
GTP_PORT = gtp_br_util.get_gtp_port_no()
for i in range(num_ues):
req = self._s1ap_wrapper.ue_req
print(
"********************** Running End to End attach for ",
"UE id ",
req.ue_id,
)
# Now actually complete the attach
attach = self._s1ap_wrapper._s1_util.attach(
req.ue_id,
s1ap_types.tfwCmd.UE_END_TO_END_ATTACH_REQUEST,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND,
s1ap_types.ueAttachAccept_t,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
# UL Flow description #1
ulFlow1 = {
"ipv4_dst": "192.168.129.42", # IPv4 destination address
"tcp_dst_port": 5002, # TCP dest port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.UPLINK, # Direction
}
# UL Flow description #2
ulFlow2 = {
"ipv4_dst": "192.168.129.42", # IPv4 destination address
"tcp_dst_port": 5001, # TCP dest port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.UPLINK, # Direction
}
# UL Flow description #3
ulFlow3 = {
"ipv4_dst": "192.168.129.64", # IPv4 destination address
"tcp_dst_port": 5003, # TCP dest port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.UPLINK, # Direction
}
# UL Flow description #4
ulFlow4 = {
"ipv4_dst": "192.168.129.42", # IPv4 destination address
"tcp_dst_port": 5001, # TCP dest port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.UPLINK, # Direction
}
# DL Flow description #1
dlFlow1 = {
"ipv4_src": "192.168.129.42", # IPv4 source address
"tcp_src_port": 5001, # TCP source port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.DOWNLINK, # Direction
}
# DL Flow description #2
dlFlow2 = {
"ipv4_src": "192.168.129.64", # IPv4 source address
"tcp_src_port": 5002, # TCP source port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.DOWNLINK, # Direction
}
# DL Flow description #3
dlFlow3 = {
"ipv4_src": "192.168.129.64", # IPv4 source address
"tcp_src_port": 5003, # TCP source port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.DOWNLINK, # Direction
}
# DL Flow description #4
dlFlow4 = {
"ipv4_src": "192.168.129.42", # IPv4 source address
"tcp_src_port": 5001, # TCP source port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.DOWNLINK, # Direction
}
# Flow lists to be configured
flow_list1 = [
ulFlow1,
ulFlow2,
ulFlow3,
dlFlow1,
dlFlow2,
dlFlow3,
]
flow_list2 = [
ulFlow4,
dlFlow4,
]
# QoS
qos1 = {
"qci": 5, # qci value [1 to 9]
"priority": 5, # Range [0-255]
"max_req_bw_ul": 10000000, # MAX bw Uplink
"max_req_bw_dl": 15000000, # MAX bw Downlink
"gbr_ul": 1000000, # GBR Uplink
"gbr_dl": 2000000, # GBR Downlink
"arp_prio": 15, # ARP priority
"pre_cap": 1, # pre-emption capability
"pre_vul": 1, # pre-emption vulnerability
}
qos2 = {
"qci": 1, # qci value [1 to 9]
"priority": 1, # Range [0-255]
"max_req_bw_ul": 10000000, # MAX bw Uplink
"max_req_bw_dl": 15000000, # MAX bw Downlink
"gbr_ul": 1000000, # GBR Uplink
"gbr_dl": 2000000, # GBR Downlink
"arp_prio": 1, # ARP priority
"pre_cap": 1, # pre-emption capability
"pre_vul": 1, # pre-emption vulnerability
}
policy_id1 = "ims-voice"
policy_id2 = "internet"
print("Sleeping for 5 seconds")
time.sleep(5)
print(
"********************** Sending RAR for IMSI",
"".join([str(i) for i in req.imsi]),
)
self._sessionManager_util.send_ReAuthRequest(
"IMSI" + "".join([str(i) for i in req.imsi]),
policy_id1,
flow_list1,
qos1,
)
# Receive Activate dedicated bearer request
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.UE_ACT_DED_BER_REQ.value
)
act_ded_ber_ctxt_req1 = response.cast(
s1ap_types.UeActDedBearCtxtReq_t
)
print("Sleeping for 5 seconds")
time.sleep(5)
# Send Activate dedicated bearer accept
self._s1ap_wrapper.sendActDedicatedBearerAccept(
req.ue_id, act_ded_ber_ctxt_req1.bearerId
)
print(
"********************** Sending 2nd RAR for IMSI",
"".join([str(i) for i in req.imsi]),
)
self._sessionManager_util.send_ReAuthRequest(
"IMSI" + "".join([str(i) for i in req.imsi]),
policy_id2,
flow_list2,
qos2,
)
# Receive Activate dedicated bearer request
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.UE_ACT_DED_BER_REQ.value
)
act_ded_ber_ctxt_req2 = response.cast(
s1ap_types.UeActDedBearCtxtReq_t
)
print("Sleeping for 5 seconds")
time.sleep(5)
# Send Activate dedicated bearer accept
self._s1ap_wrapper.sendActDedicatedBearerAccept(
req.ue_id, act_ded_ber_ctxt_req2.bearerId
)
# Check if UL and DL OVS flows are created
# UPLINK
print("Checking for uplink flow")
# try at least 5 times before failing as gateway
# might take some time to install the flows in ovs
for i in range(MAX_NUM_RETRIES):
print("Get uplink flows: attempt ", i)
uplink_flows = get_flows(
datapath,
{
"table_id": self.SPGW_TABLE,
"match": {"in_port": GTP_PORT},
},
)
if len(uplink_flows) > 2:
break
time.sleep(5) # sleep for 5 seconds before retrying
assert len(uplink_flows) > 2, "Uplink flow missing for UE"
self.assertIsNotNone(
uplink_flows[0]["match"]["tunnel_id"],
"Uplink flow missing tunnel id match",
)
# DOWNLINK
print("Checking for downlink flow")
ue_ip = str(self._s1ap_wrapper._s1_util.get_ip(req.ue_id))
# try at least 5 times before failing as gateway
# might take some time to install the flows in ovs
for i in range(MAX_NUM_RETRIES):
print("Get downlink flows: attempt ", i)
downlink_flows = get_flows(
datapath,
{
"table_id": self.SPGW_TABLE,
"match": {
"nw_dst": ue_ip,
"eth_type": 2048,
"in_port": self.LOCAL_PORT,
},
},
)
if len(downlink_flows) > 2:
break
time.sleep(5) # sleep for 5 seconds before retrying
assert len(downlink_flows) > 2, "Downlink flow missing for UE"
self.assertEqual(
downlink_flows[0]["match"]["ipv4_dst"],
ue_ip,
"UE IP match missing from downlink flow",
)
actions = downlink_flows[0]["instructions"][0]["actions"]
has_tunnel_action = any(
action
for action in actions
if action["field"] == "tunnel_id"
and action["type"] == "SET_FIELD"
)
self.assertTrue(
has_tunnel_action, "Downlink flow missing set tunnel action"
)
with self._s1ap_wrapper.configUplinkTest(req, duration=1) as test:
test.verify()
print("Sleeping for 5 seconds")
time.sleep(5)
print(
"********************** Deleting dedicated bearer for IMSI",
"".join([str(i) for i in req.imsi]),
)
self._spgw_util.delete_bearer(
"IMSI" + "".join([str(i) for i in req.imsi]),
attach.esmInfo.epsBearerId,
act_ded_ber_ctxt_req1.bearerId,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_DEACTIVATE_BER_REQ.value,
)
print("******************* Received deactivate eps bearer context")
deactv_bearer_req = response.cast(s1ap_types.UeDeActvBearCtxtReq_t)
self._s1ap_wrapper.sendDeactDedicatedBearerAccept(
req.ue_id, deactv_bearer_req.bearerId
)
print("Sleeping for 5 seconds")
time.sleep(5)
print(
"********************** Running UE detach for UE id ",
req.ue_id,
)
# Now detach the UE
self._s1ap_wrapper.s1_util.detach(
req.ue_id, detach_type[i], wait_for_s1[i]
)
print("Checking that uplink/downlink flows were deleted")
flows = get_flows(
datapath, {"table_id": self.SPGW_TABLE, "priority": 0}
)
self.assertEqual(
len(flows), 2, "There should only be 2 default table 0 flows"
)
def test_attach_detach_with_he(self):
""" Attach/detach + send ReAuth Req to session manager with a
single UE along with Header enrichment.
This test validates that same data test wotks with HE policy
applied.
Header enrichment should be as transparent as possible.
"""
num_ues = 1
detach_type = [
s1ap_types.ueDetachType_t.UE_NORMAL_DETACH.value,
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value,
]
wait_for_s1 = [True, False]
self._s1ap_wrapper.configUEDevice(num_ues)
datapath = get_datapath()
MAX_NUM_RETRIES = 5
gtp_br_util = GTPBridgeUtils()
PROXY_PORT = gtp_br_util.get_proxy_port_no()
utils = HeaderEnrichmentUtils()
for i in range(num_ues):
req = self._s1ap_wrapper.ue_req
print(
"********************** Running End to End attach for ",
"UE id ",
req.ue_id,
)
# Now actually complete the attach
self._s1ap_wrapper._s1_util.attach(
req.ue_id,
s1ap_types.tfwCmd.UE_END_TO_END_ATTACH_REQUEST,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND,
s1ap_types.ueAttachAccept_t,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
# UL Flow description #1
ulFlow1 = {
"ipv4_dst": "192.168.129.42", # IPv4 destination address
"tcp_dst_port": 5002, # TCP dest port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.UPLINK, # Direction
}
# Flow list to be configured
flow_list = [
ulFlow1,
]
# QoS
qos = {
"qci": 5, # qci value [1 to 9]
"priority": 0, # Range [0-255]
"max_req_bw_ul": 10000000, # MAX bw Uplink
"max_req_bw_dl": 15000000, # MAX bw Downlink
"gbr_ul": 1000000, # GBR Uplink
"gbr_dl": 2000000, # GBR Downlink
"arp_prio": 15, # ARP priority
"pre_cap": 1, # pre-emption capability
"pre_vul": 1, # pre-emption vulnerability
}
policy_id = "ims-voice"
print("Sleeping for 5 seconds")
time.sleep(5)
imsi = "IMSI" + "".join([str(i) for i in req.imsi])
he_domain1 = "192.168.129.42"
assert utils.he_count_record_of_imsi_to_domain(imsi,
he_domain1) == 0
print(
"********************** Sending RAR for ",
imsi,
)
self._sessionManager_util.send_ReAuthRequest(
"IMSI" + "".join([str(i) for i in req.imsi]),
policy_id,
flow_list,
qos,
he_urls=HeaderEnrichment(urls=[he_domain1]),
)
# Receive Activate dedicated bearer request
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ACT_DED_BER_REQ.value,
)
act_ded_ber_ctxt_req = response.cast(
s1ap_types.UeActDedBearCtxtReq_t, )
print("Sleeping for 5 seconds")
time.sleep(5)
# Send Activate dedicated bearer accept
self._s1ap_wrapper.sendActDedicatedBearerAccept(
req.ue_id,
act_ded_ber_ctxt_req.bearerId,
)
# Check if UL and DL OVS flows are created
# UPLINK
print("Checking for uplink proxy flow for port: ", PROXY_PORT)
# try at least 5 times before failing as gateway
# might take some time to install the flows in ovs
for i in range(MAX_NUM_RETRIES):
uplink_flows = gtp_br_util.get_flows(self.HE_TABLE)
if len(uplink_flows) > 1:
break
time.sleep(1) # sleep for 5 seconds before retrying
assert len(uplink_flows) > 1, "HE flow missing for UE"
assert utils.he_count_record_of_imsi_to_domain(imsi,
he_domain1) == 1
print(
"********************** Deleting dedicated bearer for IMSI",
"".join([str(i) for i in req.imsi]),
)
self._spgw_util.delete_bearer(
"IMSI" + "".join([str(i) for i in req.imsi]),
5,
6,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_DEACTIVATE_BER_REQ.value,
)
print("******************* Received deactivate eps bearer context")
deactv_bearer_req = response.cast(s1ap_types.UeDeActvBearCtxtReq_t)
self._s1ap_wrapper.sendDeactDedicatedBearerAccept(
req.ue_id,
deactv_bearer_req.bearerId,
)
print("Sleeping for 5 seconds")
time.sleep(5)
print(
"********************** Running UE detach for UE id ",
req.ue_id,
)
# Now detach the UE
self._s1ap_wrapper.s1_util.detach(
req.ue_id,
detach_type[i],
wait_for_s1[i],
)
time.sleep(20)
assert utils.he_count_record_of_imsi_to_domain(imsi,
he_domain1) == 0
# Verify that all UL/DL flows are deleted
self._s1ap_wrapper.s1_util.verify_flow_rules_deletion()
def test_attach_detach_rar_tcp_data_with_he(self):
""" Attach/detach + send ReAuth Req to session manager with a
single UE along with Header enrichment.
This test validates that same data test wotks with HE policy
applied.
Header enrichment should be as transparent as possible.
"""
num_ues = 1
detach_type = [
s1ap_types.ueDetachType_t.UE_NORMAL_DETACH.value,
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value,
]
wait_for_s1 = [True, False]
self._s1ap_wrapper.configUEDevice(num_ues)
datapath = get_datapath()
MAX_NUM_RETRIES = 5
gtp_br_util = GTPBridgeUtils()
GTP_PORT = gtp_br_util.get_gtp_port_no()
utils = HeaderEnrichmentUtils()
for i in range(num_ues):
req = self._s1ap_wrapper.ue_req
print(
"********************** Running End to End attach for ",
"UE id ",
req.ue_id,
)
# Now actually complete the attach
self._s1ap_wrapper._s1_util.attach(
req.ue_id,
s1ap_types.tfwCmd.UE_END_TO_END_ATTACH_REQUEST,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND,
s1ap_types.ueAttachAccept_t,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
# UL Flow description #1
ulFlow1 = {
"ipv4_dst": "192.168.129.42", # IPv4 destination address
"tcp_dst_port": 5002, # TCP dest port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.UPLINK, # Direction
}
# UL Flow description #2
ulFlow2 = {
"ipv4_dst": "192.168.129.42", # IPv4 destination address
"tcp_dst_port": 5001, # TCP dest port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.UPLINK, # Direction
}
# UL Flow description #3
ulFlow3 = {
"ipv4_dst": "192.168.129.64", # IPv4 destination address
"tcp_dst_port": 5003, # TCP dest port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.UPLINK, # Direction
}
# UL Flow description #4
ulFlow4 = {
"ipv4_dst": "192.168.129.42", # IPv4 destination address
"tcp_dst_port": 5004, # TCP dest port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.UPLINK, # Direction
}
# DL Flow description #1
dlFlow1 = {
"ipv4_src": "192.168.129.42", # IPv4 source address
"tcp_src_port": 5001, # TCP source port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.DOWNLINK, # Direction
}
# DL Flow description #2
dlFlow2 = {
"ipv4_src": "192.168.129.64", # IPv4 source address
"tcp_src_port": 5002, # TCP source port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.DOWNLINK, # Direction
}
# DL Flow description #3
dlFlow3 = {
"ipv4_src": "192.168.129.64", # IPv4 source address
"tcp_src_port": 5003, # TCP source port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.DOWNLINK, # Direction
}
# DL Flow description #4
dlFlow4 = {
"ipv4_src": "192.168.129.42", # IPv4 source address
"tcp_src_port": 5004, # TCP source port
"ip_proto": FlowMatch.IPPROTO_TCP, # Protocol Type
"direction": FlowMatch.DOWNLINK, # Direction
}
# Flow list to be configured
flow_list = [
ulFlow1,
ulFlow2,
ulFlow3,
ulFlow4,
dlFlow1,
dlFlow2,
dlFlow3,
dlFlow4,
]
# QoS
qos = {
"qci": 5, # qci value [1 to 9]
"priority": 0, # Range [0-255]
"max_req_bw_ul": 10000000, # MAX bw Uplink
"max_req_bw_dl": 15000000, # MAX bw Downlink
"gbr_ul": 1000000, # GBR Uplink
"gbr_dl": 2000000, # GBR Downlink
"arp_prio": 15, # ARP priority
"pre_cap": 1, # pre-emption capability
"pre_vul": 1, # pre-emption vulnerability
}
policy_id = "ims-voice"
print("Sleeping for 5 seconds")
time.sleep(5)
imsi = "IMSI" + "".join([str(i) for i in req.imsi])
print(
"********************** Sending RAR for ",
imsi,
)
he_domain1 = "192.168.128.1"
assert utils.he_count_record_of_imsi_to_domain(imsi,
he_domain1) == 0
self._sessionManager_util.send_ReAuthRequest(
"IMSI" + "".join([str(i) for i in req.imsi]),
policy_id,
flow_list,
qos,
he_urls=HeaderEnrichment(urls=[he_domain1]),
)
# Receive Activate dedicated bearer request
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ACT_DED_BER_REQ.value,
)
act_ded_ber_ctxt_req = response.cast(
s1ap_types.UeActDedBearCtxtReq_t, )
print("Sleeping for 5 seconds")
time.sleep(5)
# Send Activate dedicated bearer accept
self._s1ap_wrapper.sendActDedicatedBearerAccept(
req.ue_id,
act_ded_ber_ctxt_req.bearerId,
)
# Check if UL and DL OVS flows are created
# UPLINK
print("Checking for uplink flow")
# try at least 5 times before failing as gateway
# might take some time to install the flows in ovs
for i in range(MAX_NUM_RETRIES):
print("Get uplink flows: attempt ", i)
uplink_flows = get_flows(
datapath,
{
"table_id": self.SPGW_TABLE,
"match": {
"in_port": GTP_PORT
},
},
)
if len(uplink_flows) > 1:
break
time.sleep(5) # sleep for 5 seconds before retrying
assert len(uplink_flows) > 1, "Uplink flow missing for UE"
self.assertIsNotNone(
uplink_flows[0]["match"]["tunnel_id"],
"Uplink flow missing tunnel id match",
)
# DOWNLINK
print("Checking for downlink flow")
ue_ip = str(self._s1ap_wrapper._s1_util.get_ip(req.ue_id))
# try at least 5 times before failing as gateway
# might take some time to install the flows in ovs
for i in range(MAX_NUM_RETRIES):
print("Get downlink flows: attempt ", i)
downlink_flows = get_flows(
datapath,
{
"table_id": self.SPGW_TABLE,
"match": {
"nw_dst": ue_ip,
"eth_type": 2048,
"in_port": self.LOCAL_PORT,
},
},
)
if len(downlink_flows) > 1:
break
time.sleep(5) # sleep for 5 seconds before retrying
assert len(downlink_flows) > 1, "Downlink flow missing for UE"
self.assertEqual(
downlink_flows[0]["match"]["ipv4_dst"],
ue_ip,
"UE IP match missing from downlink flow",
)
actions = downlink_flows[0]["instructions"][0]["actions"]
has_tunnel_action = any(action for action in actions
if action["field"] == "tunnel_id"
and action["type"] == "SET_FIELD")
self.assertTrue(
has_tunnel_action,
"Downlink flow missing set tunnel action",
)
print("Sleeping for 5 seconds")
time.sleep(5)
with self._s1ap_wrapper.configUplinkTest(req, duration=1) as test:
test.verify()
assert utils.he_count_record_of_imsi_to_domain(imsi,
he_domain1) == 1
print(
"********************** Deleting dedicated bearer for IMSI",
"".join([str(i) for i in req.imsi]),
)
self._spgw_util.delete_bearer(
"IMSI" + "".join([str(i) for i in req.imsi]),
5,
6,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_DEACTIVATE_BER_REQ.value,
)
print("******************* Received deactivate eps bearer context")
deactv_bearer_req = response.cast(s1ap_types.UeDeActvBearCtxtReq_t)
self._s1ap_wrapper.sendDeactDedicatedBearerAccept(
req.ue_id,
deactv_bearer_req.bearerId,
)
print("Sleeping for 5 seconds")
time.sleep(5)
print(
"********************** Running UE detach for UE id ",
req.ue_id,
)
# Now detach the UE
self._s1ap_wrapper.s1_util.detach(
req.ue_id,
detach_type[i],
wait_for_s1[i],
)
time.sleep(20)
assert utils.he_count_record_of_imsi_to_domain(imsi,
he_domain1) == 0
# Verify that all UL/DL flows are deleted
self._s1ap_wrapper.s1_util.verify_flow_rules_deletion()