Python KicadMod.setTags Exemples

Exemple #1

Fichier : df13_straight_pth.py Projet : SchrodingersGat/kicad-footprint-generator

manu = "Hirose"

suffix = "Straight"

desc = "Hirose DF13 series connector, 1.25mm pitch, top entry PTH"
tags = "connector hirose df13 top straight vertical through thru hole"

for pincount in range(2,16):

    part = "DF13-{pincount:02}P-1.25DSA".format(pincount=pincount)
    
    footprint_name = "{0}_{1}_{2:02}x{3:.2f}mm_{4}".format(manu,part,pincount,pitch,suffix)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription(desc)
    kicad_mod.setTags(tags)

    A = (pincount - 1) * pitch
    B = A + 2.9
    
    # set general values
    kicad_mod.addText('reference', 'REF**', {'x':A/2, 'y':-4}, 'F.SilkS')
    #kicad_mod.addText('user', '%R', {'x':A/2, 'y':-4}, 'F.Fab')
    kicad_mod.addText('value', footprint_name, {'x':A/2, 'y':2.5}, 'F.Fab')
    
    drill = 0.6

    x_dia = 0.95
    y_dia = 1.25
    
    # create pads

Exemple #2

Fichier : ze-top-entry-tht.py Projet : andrewjrobinson/kicad-footprint-generator

        suffix = "1D"
    else:
        suffix = "D"
    jst = "B{pincount:02}B-ZESK-{suff}".format(pincount=pincount, suff=suffix)

    # Through-hole type shrouded header, side entry type
    footprint_name = "JST_ZE_" + jst + "_{pincount:02}x{pitch:02}mm_Straight".format(
        pincount=pincount, pitch=pitch)

    kicad_mod = KicadMod(footprint_name)
    desc = "JST ZE series connector, " + jst + ", 1.50mm pitch, top entry through hole"

    if boss:
        desc += " with boss"
    kicad_mod.setDescription(desc)
    kicad_mod.setTags(
        'connector jst ze top vertical straight tht through thru hole')

    #dimensions
    A = (pincount - 1) * 1.5
    B = A + 4.5

    #outline
    x1 = -1.55 - 0.7
    x2 = x1 + B

    xMid = x1 + B / 2

    y2 = 0.65
    y1 = y2 - 5.75

    #expand the outline a little bit

Exemple #3

for pincount in range(2,16):

    jst = "S{pincount:02}B-EH".format(pincount=pincount)
    
    # Through-hole type shrouded header, side entry type
    footprint_name = "JST_EH_" + jst + "_{pincount:02}x2.50mm_Angled".format(pincount=pincount)
    
    print(footprint_name)
    
    A = (pincount - 1) * pitch
    B = A + 5.0

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST EH series connector, " + jst + ", 2.50mm pitch, side entry")
    kicad_mod.setTags('connector jst eh side horizontal angled')

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x':A/2, 'y':3}, 'F.SilkS')
    kicad_mod.addText('user', '%R', {'x':A/2, 'y':-2}, 'F.Fab')
    kicad_mod.addText('value', footprint_name, {'x':A/2, 'y':-8}, 'F.Fab')
    
    drill = 0.9

    dia = 1.85
    
    # create pads
    createNumberedPadsTHT(kicad_mod, pincount, pitch, drill, {'x':dia, 'y':dia})
    
    x1 = -2.5
    y1 = -6.7

Exemple #4

Fichier : connectors_multicomp_mc9a12.py Projet : zhdjet/kicad-footprint-generator

args = parser.parse_args()

# http://www.farnell.com/datasheets/1520732.pdf

pincount = int(args.pincount[0])
pad_spacing = 2.54
start_pos_x = 0
end_pos_x = pad_spacing * (pincount - 2) / 2

# Through-hole type shrouded header, Top entry type
footprint_name = 'Multicomp_MC9A12-{pincount:02g}34_2x{pincount_half:02g}x2.54mm_Straight'.format(
    pincount=pincount, pincount_half=pincount / 2)  # TODO: name

kicad_mod = KicadMod(footprint_name)
kicad_mod.setDescription('http://www.farnell.com/datasheets/1520732.pdf')
kicad_mod.setTags('connector multicomp MC9A MC9A12')

# set general values
kicad_mod.addText('reference', 'REF**', {
    'x': start_pos_x - 3,
    'y': -7
}, 'F.SilkS')
kicad_mod.addText('value', footprint_name, {
    'x': end_pos_x / 2.,
    'y': 5
}, 'F.Fab')

# create Silkscreen

# outline
kicad_mod.addRectLine({

Exemple #5

Fichier : connectors_jst_ph_smd_top.py Projet : joonas-lahtinen/kicad-footprint-generator

# http://www.jst-mfg.com/product/pdf/eng/ePH.pdf

pincount = int(args.pincount[0])

pad_spacing = 2
start_pos_x = -(pincount - 1) * pad_spacing / 2
end_pos_x = (pincount - 1) * pad_spacing / 2

# SMT type shrouded header, Top entry type
footprint_name = 'JST_PH_B{pincount}B-PH-SM4-TB_{pincount:02}x2.00mm_Straight'.format(
    pincount=pincount)

kicad_mod = KicadMod(footprint_name)
kicad_mod.setDescription("http://www.jst-mfg.com/product/pdf/eng/ePH.pdf")
kicad_mod.setAttribute('smd')
kicad_mod.setTags('connector jst ph')
kicad_mod.setCenterPos({'x': 0, 'y': (4.75 - 1.9 + 0.6) / 2})

# set general values
kicad_mod.addText('reference', 'REF**', {
    'x': start_pos_x - 0.5,
    'y': -3 - 0.275
}, 'F.SilkS')
kicad_mod.addText('value', footprint_name, {'x': 0, 'y': 7 - 0.025}, 'F.Fab')

# create Silkscreen

kicad_mod.addPolygoneLine([{
    'x': start_pos_x - 3,
    'y': -1.3
}, {

Exemple #6

Fichier : socket_strip_2mm.py Projet : joonas-lahtinen/kicad-footprint-generator

        # Through-hole type shrouded header, Top entry type
        footprint_name = 'Socket_Strip_Straight_{rows:01}x{pincount:02}_Pitch2.00mm'.format(
            rows=rows, pincount=pincount)

        kicad_mod = KicadMod(footprint_name)

        if rows == 1:
            rlabel = "single"
        elif rows == 2:
            rlabel = "double"

        kicad_mod.setDescription(
            "Through hole socket strip, {rows}x{pincount:02}, 2.00mm pitch, ".
            format(rows=rows, pincount=pincount) + rlabel + " row")
        kicad_mod.setTags("socket strip " + rlabel + " row")

        # set general values
        kicad_mod.addText('reference', 'REF**', {'x': 0, 'y': -3}, 'F.SilkS')
        kicad_mod.addText('value', footprint_name, {'x': 0, 'y': -5}, 'F.Fab')

        #add the pads
        for r in range(rows):
            for p in range(pincount):

                Y = r * pitch
                X = p * pitch

                num = r + 1 + (p * rows)

                if (num == 1): type = "rect"

Exemple #7

Fichier : ze-top-entry-tht.py Projet : SchrodingersGat/kicad-footprint-generator

        if pincount < minPins:
            continue
            
        jst = "B{pincount:02}B-ZESK-{suff}".format(pincount=pincount,suff=suffix)

        # Through-hole type shrouded header, side entry type
        footprint_name = "JST_ZE_" + jst + "_{pincount:02}x{pitch:02}mm_Straight".format(pincount=pincount, pitch=pitch)

        print(footprint_name)
        kicad_mod = KicadMod(footprint_name)
        desc = "JST ZE series connector, " + jst + ", 1.50mm pitch, top entry through hole"
        
        if boss:
            desc += " with boss"
        kicad_mod.setDescription(desc)
        kicad_mod.setTags('connector jst ze top vertical straight tht through thru hole')

        #dimensions
        A = (pincount - 1) * 1.5
        B = A + 4.5

        #outline
        x1 = -1.55 - 0.7
        x2 = x1 + B

        xMid = x1 + B/2

        y2 = 0.65
        y1 = y2 - 5.75
        
        #add outline to F.Fab

Exemple #8

Fichier : connectors_jst_shl_smd_side.py Projet : andrewjrobinson/kicad-footprint-generator

    pad_w = 0.6
    pad_h = 1.4

    B = 2.8 + pincount
    A = (pincount - 1) * 1.0

    jst_name = "SM{pincount:02}B-SHLS-TF".format(pincount=pincount)

    # SMT type shrouded header, Side entry type (normal type)
    footprint_name = "JST_SHL_" + jst_name + "_{pincount:02}x1.00mm_Angled".format(pincount=pincount)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST SHL series connector, " + jst_name) 
    kicad_mod.setAttribute('smd')
    kicad_mod.setTags('connector jst SHL SMT side horizontal entry 1.0mm pitch')

    kicad_mod.setCenterPos({'x':0, 'y':-3.1125})

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x':0, 'y':-6.5}, 'F.SilkS')
    kicad_mod.addText('value', footprint_name, {'x':0, 'y':2}, 'F.Fab')

    #create outline
    # create Courtyard
    # output kicad model

    #create pads
    createNumberedPadsSMD(kicad_mod, pincount, pad_spacing, {'x':pad_w,'y':pad_h}, -4.675)

    #add mounting pads (no number)

Exemple #9

    #A and B should be 0.1mm resolution
    A = int(A / 0.1) * 0.1
    B = int(B / 0.1) * 0.1

    jst_name = "SM{pincount:02}B-GHS-TB".format(pincount=pincount)

    # SMT type shrouded header,
    footprint_name = "JST_GH_" + jst_name + "_{pincount:02}x1.25mm_Angled".format(
        pincount=pincount)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST GH series connector, " + jst_name +
                             ", side entry type")
    kicad_mod.setAttribute('smd')
    kicad_mod.setTags(
        'connector jst GH SMT side horizontal entry 1.25mm pitch')

    kicad_mod.setCenterPos({'x': 0, 'y': -2.95})

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x': 0, 'y': -7.5}, 'F.SilkS')
    kicad_mod.addText('value', footprint_name, {'x': 0, 'y': 1.5}, 'F.Fab')

    #create outline
    # create Courtyard
    # output kicad model

    #create pads
    createNumberedPadsSMD(kicad_mod, pincount, pad_spacing, {
        'x': pad_w,
        'y': pad_h

Exemple #10

Fichier : ze-side-entry-tht.py Projet : SchrodingersGat/kicad-footprint-generator

# http://www.jst-mfg.com/product/pdf/eng/eZE.pdf

pitch = 1.5

for pincount in range(2,17):

    jst = "S{pincount:02}B-ZESK-2D".format(pincount=pincount)

    # Through-hole type shrouded header, side entry type
    footprint_name = "JST_ZE_" + jst + "_{pincount:02}x{pitch:02}mm_Angled".format(pincount=pincount, pitch=pitch)

    print(footprint_name)
    
    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST ZE series connector, " + jst + ", 1.50mm pitch, side entry through hole")
    kicad_mod.setTags('connector jst ze side horizontal angled tht through thru hole')

    #dimensions
    A = (pincount - 1) * 1.5
    B = A + 4.5

    #outline
    x1 = -1.55 - 0.7
    x2 = x1 + B

    xMid = x1 + B/2

    y2 = 3.7 + 3.65
    y1 = y2 - 7.8 - 0.2
    
    #add outline to F.Fab

Exemple #11

Fichier : eh_side_entry_tht.py Projet : andrewjrobinson/kicad-footprint-generator

from kicad_mod import KicadMod, createNumberedPadsTHT

# http://www.jst-mfg.com/product/pdf/eng/ePH.pdf

pitch = 2.50

for pincount in range(2,16):

    jst = "S{pincount:02}B-EH".format(pincount=pincount)
    
    # Through-hole type shrouded header, side entry type
    footprint_name = "JST_EH_" + jst + "_{pincount:02}x2.50mm_Angled".format(pincount=pincount)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST EH series connector, " + jst + ", 2.50mm pitch, side entry")
    kicad_mod.setTags('connector jst eh side horizontal angled')

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x':0, 'y':4}, 'F.SilkS')
    kicad_mod.addText('value', footprint_name, {'x':0, 'y':6}, 'F.Fab')
    
    drill = 0.9

    dia = 1.85
    
    # create pads
    createNumberedPadsTHT(kicad_mod, pincount, pitch, drill, {'x':dia, 'y':dia})
    
    A = (pincount - 1) * pitch
    B = A + 5.0
    

Exemple #12

Fichier : pin_header_2mm.py Projet : SchrodingersGat/kicad-footprint-generator

for rows in [1,2]:
    for pincount in range(2,41): #range(1,21):

        # Through-hole type shrouded header, Top entry type
        footprint_name = 'Pin_Header_Straight_{rows:01}x{pincount:02}_Pitch2.00mm'.format(rows=rows,pincount=pincount)

        kicad_mod = KicadMod(footprint_name)
        
        if rows == 1:
            rlabel = "single"
        elif rows == 2:
            rlabel = "double"
        
        kicad_mod.setDescription("Through hole pin header, {rows}x{pincount:02}, 2.00mm pitch, ".format(rows=rows,pincount=pincount) + rlabel + " row")
        kicad_mod.setTags("pin header " + rlabel + " row")

        # set general values
        kicad_mod.addText('reference', 'REF**', {'x':0, 'y':-5}, 'F.SilkS')
        kicad_mod.addText('value', footprint_name, {'x':0, 'y':-3}, 'F.Fab')
        
        #add the pads
        for r in range(rows):
            for p in range(pincount):
                X = r * pitch
                Y = p * pitch
                
                num = r + 1 + (p * rows)
                
                if num == 1: type = "rect"
                else: type = "circle"

Exemple #13

    pad_w = 0.5
    pad_h = 1.0

    B = 3 + (pincount - 1) * pad_spacing
    A = (pincount - 1) * pad_spacing

    jst_name = "SM{pincount:02}B-SURS-TF".format(pincount=pincount)

    # SMT type shrouded header, Side entry type (normal type)
    footprint_name = "JST_SUR_" + jst_name + "_{pincount:02}x0.80mm_Angled".format(
        pincount=pincount)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST SUR series connector, " + jst_name)
    kicad_mod.setAttribute('smd')
    kicad_mod.setTags(
        'connector jst SUR SMT side horizontal entry 0.80mm pitch')

    kicad_mod.setCenterPos({'x': 0, 'y': -3.125})  #-1.675})

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x': 0, 'y': -6.5}, 'F.SilkS')
    kicad_mod.addText('value', footprint_name, {'x': 0, 'y': 2}, 'F.Fab')

    #create outline
    # create Courtyard
    # output kicad model

    #create pads
    createNumberedPadsSMD(kicad_mod, pincount, pad_spacing, {
        'x': pad_w,
        'y': pad_h

Exemple #14

Fichier : connectors_jst_SUR_side_entry.py Projet : andrewjrobinson/kicad-footprint-generator

    pad_w = 0.5
    pad_h = 1.0

    B = 3 + (pincount - 1) * pad_spacing
    A = (pincount - 1) * pad_spacing

    jst_name = "SM{pincount:02}B-SURS-TF".format(pincount=pincount)

    # SMT type shrouded header, Side entry type (normal type)
    footprint_name = "JST_SUR_" + jst_name + "_{pincount:02}x0.80mm_Angled".format(pincount=pincount)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST SUR series connector, " + jst_name) 
    kicad_mod.setAttribute('smd')
    kicad_mod.setTags('connector jst SUR SMT side horizontal entry 0.80mm pitch')

    kicad_mod.setCenterPos({'x':0, 'y':-3.125}) #-1.675})

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x':0, 'y':-6.5}, 'F.SilkS')
    kicad_mod.addText('value', footprint_name, {'x':0, 'y':2}, 'F.Fab')

    #create outline
    # create Courtyard
    # output kicad model

    #create pads
    createNumberedPadsSMD(kicad_mod, pincount, pad_spacing, {'x':pad_w,'y':pad_h}, -4.675)

    #add mounting pads (no number)

Exemple #15

Fichier : connectors_multicomp_mc9a12.py Projet : SchrodingersGat/kicad-footprint-generator

parser.add_argument('-v', '--verbose', help='show extra information while generating the footprint', action='store_true') #TODO
args = parser.parse_args()

# http://www.farnell.com/datasheets/1520732.pdf

pincount = int(args.pincount[0])
pad_spacing = 2.54
start_pos_x = 0
end_pos_x = pad_spacing*(pincount-2)/2

# Through-hole type shrouded header, Top entry type
footprint_name = 'Multicomp_MC9A12-{pincount:02g}34_2x{pincount_half:02g}x2.54mm_Straight'.format(pincount=pincount, pincount_half=pincount/2) # TODO: name

kicad_mod = KicadMod(footprint_name)
kicad_mod.setDescription('http://www.farnell.com/datasheets/1520732.pdf')
kicad_mod.setTags('connector multicomp MC9A MC9A12')

# set general values
kicad_mod.addText('reference', 'REF**', {'x':start_pos_x-3, 'y':-7}, 'F.SilkS')
kicad_mod.addText('value', footprint_name, {'x':end_pos_x/2., 'y':5}, 'F.Fab')

# create Silkscreen

# outline
kicad_mod.addRectLine({'x':start_pos_x-3.87-1.2, 'y':3.2}, {'x':end_pos_x+3.87+1.2, 'y':-pad_spacing-3.2}, 'F.SilkS', 0.15)

# slot(s)
if pincount < 60:
    kicad_mod.addPolygoneLine([{'x':((start_pos_x+end_pos_x)/2)-4.45/2, 'y':3.2}
                              ,{'x':((start_pos_x+end_pos_x)/2)-4.45/2, 'y':1.9}
                              ,{'x':start_pos_x-3.87, 'y':1.9}

Exemple #16

pitch = 1.5

for pincount in range(2, 17):

    jst = "BM{pincount:02}B-ZESS-TBT".format(pincount=pincount)

    # Through-hole type shrouded header, side entry type
    footprint_name = "JST_ZE_" + jst + "_{pincount:02}x{pitch:02}mm_Straight".format(
        pincount=pincount, pitch=pitch)

    print(footprint_name)
    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setAttribute('smd')  #this is an SMD part111one
    desc = "JST ZE series connector, " + jst + ", 1.50mm pitch, top entry surface mount"
    kicad_mod.setDescription(desc)
    kicad_mod.setTags(
        'connector jst ze top vertical straight smt surface mount')

    #dimensions
    A = (pincount - 1) * 1.5
    B = A + 6

    #y-coords calculated based on drawing in datasheet
    #middle point of pads
    py = -6.7
    #middle point of mechanical pads
    my = -1.65

    #size of mechanical pads
    mw = 2.0
    mh = 3.3
    #x-pos of mechanical pads

Exemple #17

Fichier : pin_header_2mm.py Projet : joonas-lahtinen/kicad-footprint-generator

        # Through-hole type shrouded header, Top entry type
        footprint_name = 'Pin_Header_Straight_{rows:01}x{pincount:02}_Pitch2.00mm'.format(
            rows=rows, pincount=pincount)

        kicad_mod = KicadMod(footprint_name)

        if rows == 1:
            rlabel = "single"
        elif rows == 2:
            rlabel = "double"

        kicad_mod.setDescription(
            "Through hole pin header, {rows}x{pincount:02}, 2.00mm pitch, ".
            format(rows=rows, pincount=pincount) + rlabel + " row")
        kicad_mod.setTags("pin header " + rlabel + " row")

        # set general values
        kicad_mod.addText('reference', 'REF**', {'x': 0, 'y': -5}, 'F.SilkS')
        kicad_mod.addText('value', footprint_name, {'x': 0, 'y': -3}, 'F.Fab')

        #add the pads
        for r in range(rows):
            for p in range(pincount):
                X = r * pitch
                Y = p * pitch

                num = r + 1 + (p * rows)

                if num == 1: type = "rect"
                else: type = "circle"

Exemple #18

Fichier : connectors_jst_gh_smd_top.py Projet : andrewjrobinson/kicad-footprint-generator

    A = (pincount - 1) * 1.25
    B = 3.25 + pincount * 1.25
    
    #A and B should be 0.1mm resolution
    A = int(A/0.1) * 0.1
    B = int(B/0.1) * 0.1

    jst_name = "BM{pincount:02}B-GHS-TBT".format(pincount=pincount)

    # SMT type shrouded header,
    footprint_name = "JST_GH_" + jst_name + "_{pincount:02}x1.25mm_Straight".format(pincount=pincount)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST GH series connector, " + jst_name + ", top entry type") 
    kicad_mod.setAttribute('smd')
    kicad_mod.setTags('connector jst GH SMT top vertical entry 1.25mm pitch')

    kicad_mod.setCenterPos({'x':0, 'y':-3.075})

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x':0, 'y':-7.5}, 'F.SilkS')
    kicad_mod.addText('value', footprint_name, {'x':0, 'y':1.5}, 'F.Fab')

    #create outline
    # create Courtyard
    # output kicad model

    #create pads
    createNumberedPadsSMD(kicad_mod, pincount, pad_spacing, {'x':pad_w,'y':pad_h},-4.75)

    #add mounting pads (no number)

Exemple #19

Fichier : gh_smd_side.py Projet : SchrodingersGat/kicad-footprint-generator

    
    #A and B should be 0.1mm resolution
    A = int(A/0.1) * 0.1
    B = int(B/0.1) * 0.1

    jst_name = "SM{pincount:02}B-GHS-TB".format(pincount=pincount)

    # SMT type shrouded header,
    footprint_name = "JST_GH_" + jst_name + "_{pincount:02}x1.25mm_Angled".format(pincount=pincount)
    
    print(footprint_name)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST GH series connector, " + jst_name + ", side entry type") 
    kicad_mod.setAttribute('smd')
    kicad_mod.setTags('connector jst GH SMT side horizontal entry 1.25mm pitch')

    kicad_mod.setCenterPos({'x':0, 'y':-2.95})

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x':0, 'y':-6.75}, 'F.SilkS')
    kicad_mod.addText('value', footprint_name, {'x':0, 'y':1.5}, 'F.Fab')

    #create outline
    # create Courtyard
    # output kicad model

    #create pads
    createNumberedPadsSMD(kicad_mod, pincount, pad_spacing, {'x':pad_w,'y':pad_h},-4.55)

    #add mounting pads (no number)

Exemple #20

    A = int(A / 0.1) * 0.1
    B = int(B / 0.1) * 0.1

    jst_name = "BM{pincount:02}B-GHS-TBT".format(pincount=pincount)

    # SMT type shrouded header,
    footprint_name = "JST_GH_" + jst_name + "_{pincount:02}x1.25mm_Straight".format(
        pincount=pincount)

    print(footprint_name)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST GH series connector, " + jst_name +
                             ", top entry type")
    kicad_mod.setAttribute('smd')
    kicad_mod.setTags('connector jst GH SMT top vertical entry 1.25mm pitch')

    kicad_mod.setCenterPos({'x': 0, 'y': 3.075})

    #draw outline on the F.Fab layer
    y1 = 4.25 / 2 + 2.25
    y2 = y1 - 4.25
    kicad_mod.addRectLine({
        'x': -B / 2,
        'y': y1
    }, {
        'x': B / 2,
        'y': y2
    }, 'F.Fab', 0.10)

    # set general values

Exemple #21

# http://www.jst-mfg.com/product/pdf/eng/eZE.pdf

pitch = 1.5

for pincount in range(2, 17):

    jst = "S{pincount:02}B-ZESK-2D".format(pincount=pincount)

    # Through-hole type shrouded header, side entry type
    footprint_name = "JST_ZE_" + jst + "_{pincount:02}x{pitch:02}mm_Angled".format(
        pincount=pincount, pitch=pitch)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST ZE series connector, " + jst +
                             ", 1.50mm pitch, side entry through hole")
    kicad_mod.setTags(
        'connector jst ze side horizontal angled tht through thru hole')

    #dimensions
    A = (pincount - 1) * 1.5
    B = A + 4.5

    #outline
    x1 = -1.55 - 0.7
    x2 = x1 + B

    xMid = x1 + B / 2

    y2 = 3.7 + 3.65
    y1 = y2 - 7.8 - 0.2

    #expand the outline a little bit

Exemple #22

Fichier : eh_top_entry_tht.py Projet : andrewjrobinson/kicad-footprint-generator

from kicad_mod import KicadMod, createNumberedPadsTHT

# http://www.jst-mfg.com/product/pdf/eng/ePH.pdf

pitch = 2.50

for pincount in range(2,16):

    jst = "B{pincount:02}B-EH-A".format(pincount=pincount)
    
    # Through-hole type shrouded header, Top entry type
    footprint_name = "JST_EH_" + jst + "_{pincount:02}x2.50mm_Straight".format(pincount=pincount)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST EH series connector, " + jst + ", 2.50mm pitch, top entry")
    kicad_mod.setTags('connector jst eh top vertical straight')

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x':0, 'y':-3}, 'F.SilkS')
    kicad_mod.addText('value', footprint_name, {'x':0, 'y':5}, 'F.Fab')
    
    drill = 0.9

    dia = 1.85
    
    # create pads
    createNumberedPadsTHT(kicad_mod, pincount, pitch, drill, {'x':dia, 'y':dia})
    
    A = (pincount - 1) * pitch
    B = A + 5.0
    

Exemple #23

# http://www.jst-mfg.com/product/pdf/eng/ePH.pdf

pitch = 2.50

for pincount in range(2, 16):

    jst = "B{pincount:02}B-EH-A".format(pincount=pincount)

    # Through-hole type shrouded header, Top entry type
    footprint_name = "JST_EH_" + jst + "_{pincount:02}x2.50mm_Straight".format(
        pincount=pincount)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST EH series connector, " + jst +
                             ", 2.50mm pitch, top entry")
    kicad_mod.setTags('connector jst eh top vertical straight')

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x': 0, 'y': -3}, 'F.SilkS')
    kicad_mod.addText('value', footprint_name, {'x': 0, 'y': 5}, 'F.Fab')

    drill = 0.9

    dia = 1.85

    # create pads
    createNumberedPadsTHT(kicad_mod, pincount, pitch, drill, {
        'x': dia,
        'y': dia
    })

Exemple #24

Fichier : socket_strip_2mm.py Projet : SchrodingersGat/kicad-footprint-generator

            rows=rows, pincount=pincount
        )

        kicad_mod = KicadMod(footprint_name)

        if rows == 1:
            rlabel = "single"
        elif rows == 2:
            rlabel = "double"

        kicad_mod.setDescription(
            "Through hole socket strip, {rows}x{pincount:02}, 2.00mm pitch, ".format(rows=rows, pincount=pincount)
            + rlabel
            + " row"
        )
        kicad_mod.setTags("socket strip " + rlabel + " row")

        # set general values
        kicad_mod.addText("reference", "REF**", {"x": 0, "y": -3}, "F.SilkS")
        kicad_mod.addText("value", footprint_name, {"x": 0, "y": -5}, "F.Fab")

        # add the pads
        for r in range(rows):
            for p in range(pincount):

                Y = r * pitch
                X = p * pitch

                num = r + 1 + (p * rows)

                if num == 1:

Exemple #25

Fichier : connectors_molex_kk_6410_top.py Projet : SchrodingersGat/kicad-footprint-generator

parser.add_argument('-v', '--verbose', help='show extra information while generating the footprint', action='store_true') #TODO
args = parser.parse_args()

# http://www.molex.com/pdm_docs/sd/022272021_sd.pdf

pincount = int(args.pincount[0])
pad_spacing = 2.54
start_pos_x = 0
end_pos_x = (pincount-1)*pad_spacing

# Through-hole type shrouded header, Top entry type
footprint_name = 'Molex_KK_6410-{pincount:02g}'.format(pincount=pincount) # TODO: name

kicad_mod = KicadMod(footprint_name)
kicad_mod.setDescription("Connector Headers with Friction Lock, 22-27-2{pincount:02g}1, http://www.molex.com/pdm_docs/sd/022272021_sd.pdf".format(pincount=pincount))
kicad_mod.setTags('connector molex kk_6410 22-27-2{pincount:02g}1'.format(pincount=pincount))

# set general values
kicad_mod.addText('reference', 'REF**', {'x':start_pos_x+1, 'y':-4.5}, 'F.SilkS')
kicad_mod.addText('value', footprint_name, {'x':(pincount-1)*pad_spacing/2., 'y':4.5}, 'F.Fab')

# create Silkscreen

kicad_mod.addRectLine({'x':start_pos_x-2.54/2-0.1, 'y':-3.02}, {'x':end_pos_x+2.54/2+0.1, 'y':2.98}, 'F.SilkS', 0.15)

#ramps
if pincount <= 6:
    # single ramp
    kicad_mod.addPolygoneLine([{'x':start_pos_x, 'y':2.98}
                              ,{'x':start_pos_x, 'y':1.98}
                              ,{'x':end_pos_x, 'y':1.98}

Exemple #26

    pad_w = 0.6
    pad_h = 1.4

    B = 2.8 + pincount
    A = (pincount - 1) * 1.0

    jst_name = "SM{pincount:02}B-SHLS-TF".format(pincount=pincount)

    # SMT type shrouded header, Side entry type (normal type)
    footprint_name = "JST_SHL_" + jst_name + "_{pincount:02}x1.00mm_Angled".format(
        pincount=pincount)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST SHL series connector, " + jst_name)
    kicad_mod.setAttribute('smd')
    kicad_mod.setTags(
        'connector jst SHL SMT side horizontal entry 1.0mm pitch')

    kicad_mod.setCenterPos({'x': 0, 'y': -3.1125})

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x': 0, 'y': -6.5}, 'F.SilkS')
    kicad_mod.addText('value', footprint_name, {'x': 0, 'y': 2}, 'F.Fab')

    #create outline
    # create Courtyard
    # output kicad model

    #create pads
    createNumberedPadsSMD(kicad_mod, pincount, pad_spacing, {
        'x': pad_w,
        'y': pad_h

Exemple #27

# http://www.molex.com/pdm_docs/sd/022272021_sd.pdf

pincount = int(args.pincount[0])
pad_spacing = 2.54
start_pos_x = 0
end_pos_x = (pincount - 1) * pad_spacing

# Through-hole type shrouded header, Top entry type
footprint_name = 'Molex_KK_6410-{pincount:02g}'.format(
    pincount=pincount)  # TODO: name

kicad_mod = KicadMod(footprint_name)
kicad_mod.setDescription(
    "Connector Headers with Friction Lock, 22-27-2{pincount:02g}1, http://www.molex.com/pdm_docs/sd/022272021_sd.pdf"
    .format(pincount=pincount))
kicad_mod.setTags(
    'connector molex kk_6410 22-27-2{pincount:02g}1'.format(pincount=pincount))

# set general values
kicad_mod.addText('reference', 'REF**', {
    'x': start_pos_x + 1,
    'y': -4.5
}, 'F.SilkS')
kicad_mod.addText('value', footprint_name, {
    'x': (pincount - 1) * pad_spacing / 2.,
    'y': 4.5
}, 'F.Fab')

# create Silkscreen

kicad_mod.addRectLine({
    'x': start_pos_x - 2.54 / 2 - 0.1,

Exemple #28

Fichier : connectors_jst_ph_tht_side.py Projet : SchrodingersGat/kicad-footprint-generator

parser = argparse.ArgumentParser()
parser.add_argument('pincount', help='number of pins of the jst connector', type=int, nargs=1)
parser.add_argument('-v', '--verbose', help='show extra information while generating the footprint', action='store_true') #TODO
args = parser.parse_args()

# http://www.jst-mfg.com/product/pdf/eng/ePH.pdf

pincount = int(args.pincount[0])

# Through-hole type shrouded header, Side entry type
footprint_name = 'JST_PH_S{pincount}B-PH-K_{pincount:02}x2.00mm_Angled'.format(pincount=pincount)

kicad_mod = KicadMod(footprint_name)
kicad_mod.setDescription("http://www.jst-mfg.com/product/pdf/eng/ePH.pdf")
kicad_mod.setTags('connector jst ph')

# set general values
kicad_mod.addText('reference', 'REF**', {'x':0, 'y':-2.5}, 'F.SilkS')
kicad_mod.addText('value', footprint_name, {'x':(pincount-1)*2/2, 'y':7.5}, 'F.Fab')

# create Silkscreen
kicad_mod.addPolygoneLine([{'x':0.5, 'y':6.25}
                          ,{'x':0.5, 'y':2}
                          ,{'x':(pincount-1)*2-0.5, 'y':2}
                          ,{'x':(pincount-1)*2-0.5, 'y':6.25}]
                          ,'F.SilkS', 0.15)

kicad_mod.addPolygoneLine([{'x':-0.9, 'y':0.25}
                          ,{'x':-1.95+0.7, 'y':0.25}
                          ,{'x':-1.95+0.7, 'y':-1.35}

Exemple #29

Fichier : ze-top-entry-smd.py Projet : SchrodingersGat/kicad-footprint-generator

pitch = 1.5

for pincount in range(2, 17):

    jst = "BM{pincount:02}B-ZESS-TBT".format(pincount=pincount)

    # Through-hole type shrouded header, side entry type
    footprint_name = "JST_ZE_" + jst + "_{pincount:02}x{pitch:02}mm_Straight".format(pincount=pincount, pitch=pitch)

    print(footprint_name)
    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setAttribute("smd")  # this is an SMD part111one
    desc = "JST ZE series connector, " + jst + ", 1.50mm pitch, top entry surface mount"
    kicad_mod.setDescription(desc)
    kicad_mod.setTags("connector jst ze top vertical straight smt surface mount")

    # dimensions
    A = (pincount - 1) * 1.5
    B = A + 6

    # y-coords calculated based on drawing in datasheet
    # middle point of pads
    py = -6.7
    # middle point of mechanical pads
    my = -1.65

    # size of mechanical pads
    mw = 2.0
    mh = 3.3
    # x-pos of mechanical pads

Exemple #30

Fichier : panelmate_side.py Projet : joonas-lahtinen/kicad-footprint-generator

    part = "53780-{0:02}70".format(pincount)

    desc = "{0:} {1}".format(manu, series)
    desc += " series connector, {0:.2f}mm pitch, side entry SMT, P/N: {1:}".format(
        pitch, part)
    tags = "conn molex panelmate"

    footprint_name = "{0}-{1}_{2:02}x{3:.2f}mm_{4}".format(
        manu + "_" + series, part, pincount, pitch, suffix)

    print(footprint_name)

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription(desc)
    kicad_mod.setTags(tags)

    kicad_mod.setAttribute('smd')

    # set general values
    kicad_mod.addText('reference', 'REF**', {'x': 0, 'y': -3}, 'F.SilkS')
    #kicad_mod.addText('user', '%R', {'x':0, 'y':-3}, 'F.Fab')
    kicad_mod.addText('value', footprint_name, {'x': 0, 'y': 7}, 'F.Fab')

    #pin pad size
    pad_w = 0.8
    pad_h = 1.9

    #component values
    A = (pincount - 1) * pitch
    B = A + 6.4

Exemple #31

Fichier : eh_top_entry_tht.py Projet : SchrodingersGat/kicad-footprint-generator

for pincount in range(2, 16):

    jst = "B{pincount:02}B-EH-A".format(pincount=pincount)

    # Through-hole type shrouded header, Top entry type
    footprint_name = "JST_EH_" + jst + "_{pincount:02}x2.50mm_Straight".format(pincount=pincount)

    print(footprint_name)

    A = (pincount - 1) * pitch
    B = A + 5.0

    kicad_mod = KicadMod(footprint_name)
    kicad_mod.setDescription("JST EH series connector, " + jst + ", 2.50mm pitch, top entry")
    kicad_mod.setTags("connector jst eh top vertical straight")

    # set general values
    kicad_mod.addText("reference", "REF**", {"x": 0, "y": -3}, "F.SilkS")
    kicad_mod.addText("value", footprint_name, {"x": A / 2, "y": 3.5}, "F.Fab")

    drill = 0.9

    dia = 1.85

    # create pads
    createNumberedPadsTHT(kicad_mod, pincount, pitch, drill, {"x": dia, "y": dia})

    x1 = -2.5
    y1 = -1.6
    x2 = x1 + B