Exemple #1
0
 def flood_ping():
     logging.info("Flood with large frames")
     kvm_test_utils.ping(ip,
                         interface=ifname,
                         packetsize=max_icmp_pkt_size,
                         flood=True,
                         timeout=float(flood_time))
Exemple #2
0
 def flood_ping(src, dst):
     # we must use a dedicated session becuase the kvm_subprocess
     # does not have the other method to interrupt the process in
     # the guest rather than close the session.
     session_flood = vm[src].wait_for_login(timeout=60)
     kvm_test_utils.ping(vlan_ip[dst], flood=True,
                        interface=ifname[src],
                        session=session_flood, timeout=10)
     session_flood.close()
Exemple #3
0
def run_set_link(test, params, env):
    """
    KVM guest link test:
    1) Boot up guest with one nic
    2) Ping guest from host
    3) Disable guest link and ping guest from host
    4) Re-enable guest link and ping guest from host
    5) Do file transfer test

    @param test: kvm test object
    @param params: Dictionary with the test parameters
    @param env: Dictionary with test environment.
    """
    vm = kvm_test_utils.get_living_vm(env, params.get("main_vm"))
    timeout = float(params.get("login_timeout", 360))
    session = kvm_test_utils.wait_for_login(vm, 0, timeout, 0, 2)

    ip = vm.get_address(0)
    linkname = vm.netdev_id[0]

    logging.info("Pinging guest from host")
    s, o = kvm_test_utils.ping(ip, count=10, timeout=20)
    if s != 0:
        raise error.TestFail("Ping failed, status: %s, output: %s" % (s, o))
    ratio = kvm_test_utils.get_loss_ratio(o)
    if ratio != 0:
        raise error.TestFail("Loss ratio is %s, output: %s" % (ratio, o))

    logging.info("Executing 'set link %s off'", linkname)
    vm.monitor.cmd("set_link %s off" % linkname)
    logging.info(vm.monitor.info("network"))
    logging.info("Pinging guest from host")
    s, o = kvm_test_utils.ping(ip, count=10, timeout=20)
    if s == 0:
        raise error.TestFail("Ping unexpectedly succeeded, status: %s,"
                             "output: %s" % (s, o))
    ratio = kvm_test_utils.get_loss_ratio(o)
    if ratio != 100:
        raise error.TestFail("Loss ratio is not 100%%,"
                             "Loss ratio is %s" % ratio)

    logging.info("Executing 'set link %s on'", linkname)
    vm.monitor.cmd("set_link %s on" % linkname)
    logging.info(vm.monitor.info("network"))
    logging.info("Pinging guest from host")
    s, o = kvm_test_utils.ping(ip, count=10, timeout=20)
    if s != 0:
        raise error.TestFail("Ping failed, status: %s, output: %s" % (s, o))
    ratio = kvm_test_utils.get_loss_ratio(o)
    if ratio != 0:
        raise error.TestFail("Loss ratio is %s, output: %s" % (ratio, o))

    file_transfer.run_file_transfer(test, params, env)
    session.close()
Exemple #4
0
 def flood_ping(src, dst):
     # we must use a dedicated session becuase the kvm_subprocess
     # does not have the other method to interrupt the process in
     # the guest rather than close the session.
     session_flood = vm[src].wait_for_login(timeout=60)
     kvm_test_utils.ping(vlan_ip[dst],
                         flood=True,
                         interface=ifname[src],
                         session=session_flood,
                         timeout=10)
     session_flood.close()
Exemple #5
0
        def size_increase_ping(step=random.randrange(90, 110)):
            logging.info("Size increase ping")
            for size in range(0, max_icmp_pkt_size + 1, step):
                logging.info("Ping %s with size %s", ip, size)
                s, o = kvm_test_utils.ping(ip, 1, interface=ifname,
                                           packetsize=size,
                                           hint="do", timeout=1)
                if s != 0:
                    s, o = kvm_test_utils.ping(ip, 10, interface=ifname,
                                               packetsize=size,
                                               adaptive=True, hint="do",
                                               timeout=20)

                    if kvm_test_utils.get_loss_ratio(o) > int(params.get(
                                                      "fail_ratio", 50)):
                        raise error.TestFail("Ping loss ratio is greater "
                                             "than 50% for size %s" % size)
Exemple #6
0
 def is_mtu_ok():
     s, o = kvm_test_utils.ping(ip,
                                1,
                                interface=ifname,
                                packetsize=max_icmp_pkt_size,
                                hint="do",
                                timeout=2)
     return s == 0
Exemple #7
0
 def large_frame_ping(count=100):
     logging.info("Large frame ping")
     s, o = kvm_test_utils.ping(ip, count, interface=ifname,
                                packetsize=max_icmp_pkt_size,
                                timeout=float(count) * 2)
     ratio = kvm_test_utils.get_loss_ratio(o)
     if ratio != 0:
         raise error.TestFail("Loss ratio of large frame ping is %s" %
                              ratio)
Exemple #8
0
 def large_frame_ping(count=100):
     logging.info("Large frame ping")
     s, o = kvm_test_utils.ping(ip,
                                count,
                                interface=ifname,
                                packetsize=max_icmp_pkt_size,
                                timeout=float(count) * 2)
     ratio = kvm_test_utils.get_loss_ratio(o)
     if ratio != 0:
         raise error.TestFail("Loss ratio of large frame ping is %s" %
                              ratio)
Exemple #9
0
 def verify_mtu():
     logging.info("Verify the path MTU")
     s, o = kvm_test_utils.ping(ip, 10, interface=ifname,
                                packetsize=max_icmp_pkt_size,
                                hint="do", timeout=15)
     if s != 0 :
         logging.error(o)
         raise error.TestFail("Path MTU is not as expected")
     if kvm_test_utils.get_loss_ratio(o) != 0:
         logging.error(o)
         raise error.TestFail("Packet loss ratio during MTU "
                              "verification is not zero")
Exemple #10
0
    def set_link_test(linkid):
        """
        Issue set_link commands and test its function

        @param linkid: id of netdev or devices to be tested
        """
        ip = vm.get_address(0)

        vm.monitor.cmd("set_link %s down" % linkid)
        s, o = kvm_test_utils.ping(ip, count=10, timeout=20)
        if kvm_test_utils.get_loss_ratio(o) != 100:
            raise error.TestFail("Still can ping the %s after down %s" %
                                 (ip, linkid))

        vm.monitor.cmd("set_link %s up" % linkid)
        s, o = kvm_test_utils.ping(ip, count=10, timeout=20)
        # we use 100% here as the notification of link status changed may be
        # delayed in guest driver
        if kvm_test_utils.get_loss_ratio(o) == 100:
            raise error.TestFail("Packet loss during ping %s after up %s" %
                                 (ip, linkid))
Exemple #11
0
        def size_increase_ping(step=random.randrange(90, 110)):
            logging.info("Size increase ping")
            for size in range(0, max_icmp_pkt_size + 1, step):
                logging.info("Ping %s with size %s", ip, size)
                s, o = kvm_test_utils.ping(ip,
                                           1,
                                           interface=ifname,
                                           packetsize=size,
                                           hint="do",
                                           timeout=1)
                if s != 0:
                    s, o = kvm_test_utils.ping(ip,
                                               10,
                                               interface=ifname,
                                               packetsize=size,
                                               adaptive=True,
                                               hint="do",
                                               timeout=20)

                    if kvm_test_utils.get_loss_ratio(o) > int(
                            params.get("fail_ratio", 50)):
                        raise error.TestFail("Ping loss ratio is greater "
                                             "than 50% for size %s" % size)
Exemple #12
0
 def verify_mtu():
     logging.info("Verify the path MTU")
     s, o = kvm_test_utils.ping(ip,
                                10,
                                interface=ifname,
                                packetsize=max_icmp_pkt_size,
                                hint="do",
                                timeout=15)
     if s != 0:
         logging.error(o)
         raise error.TestFail("Path MTU is not as expected")
     if kvm_test_utils.get_loss_ratio(o) != 0:
         logging.error(o)
         raise error.TestFail("Packet loss ratio during MTU "
                              "verification is not zero")
Exemple #13
0
    output = session.cmd_output("python /tmp/multicast_guest.py %d %s %d" %
                                (mgroup_count, prefix, suffix))

    # if success to join multicast, the process will be paused, and return PID.
    try:
        pid = re.findall("join_mcast_pid:(\d+)", output)[0]
    except IndexError:
        raise error.TestFail("Can't join multicast groups,output:%s" % output)

    try:
        for i in range(mgroup_count):
            new_suffix = suffix + i
            mcast = "%s.%d" % (prefix, new_suffix)

            logging.info("Initial ping test, mcast: %s", mcast)
            s, o = kvm_test_utils.ping(mcast, 10, interface=ifname, timeout=20)
            if s != 0:
                raise error.TestFail(" Ping return non-zero value %s" % o)

            logging.info("Flood ping test, mcast: %s", mcast)
            kvm_test_utils.ping(mcast, None, interface=ifname, flood=True,
                                output_func=None, timeout=flood_minutes*60)

            logging.info("Final ping test, mcast: %s", mcast)
            s, o = kvm_test_utils.ping(mcast, 10, interface=ifname, timeout=20)
            if s != 0:
                raise error.TestFail("Ping failed, status: %s, output: %s" %
                                     (s, o))

    finally:
        logging.debug(session.cmd_output("ipmaddr show"))
Exemple #14
0
def run_vlan(test, params, env):
    """
    Test 802.1Q vlan of NIC, config it by vconfig command.

    1) Create two VMs.
    2) Setup guests in 10 different vlans by vconfig and using hard-coded
       ip address.
    3) Test by ping between same and different vlans of two VMs.
    4) Test by TCP data transfer, floop ping between same vlan of two VMs.
    5) Test maximal plumb/unplumb vlans.
    6) Recover the vlan config.

    @param test: KVM test object.
    @param params: Dictionary with the test parameters.
    @param env: Dictionary with test environment.
    """
    vm = []
    session = []
    ifname = []
    vm_ip = []
    digest_origin = []
    vlan_ip = ['', '']
    ip_unit = ['1', '2']
    subnet = params.get("subnet")
    vlan_num = int(params.get("vlan_num"))
    maximal = int(params.get("maximal"))
    file_size = params.get("file_size")

    vm.append(env.get_vm(params["main_vm"]))
    vm.append(env.get_vm("vm2"))
    for vm_ in vm:
        vm_.verify_alive()

    def add_vlan(session, v_id, iface="eth0"):
        session.cmd("vconfig add %s %s" % (iface, v_id))

    def set_ip_vlan(session, v_id, ip, iface="eth0"):
        iface = "%s.%s" % (iface, v_id)
        session.cmd("ifconfig %s %s" % (iface, ip))

    def set_arp_ignore(session, iface="eth0"):
        ignore_cmd = "echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore"
        session.cmd(ignore_cmd)

    def rem_vlan(session, v_id, iface="eth0"):
        rem_vlan_cmd = "if [[ -e /proc/net/vlan/%s ]];then vconfig rem %s;fi"
        iface = "%s.%s" % (iface, v_id)
        return session.cmd_status(rem_vlan_cmd % (iface, iface))

    def nc_transfer(src, dst):
        nc_port = kvm_utils.find_free_port(1025, 5334, vm_ip[dst])
        listen_cmd = params.get("listen_cmd")
        send_cmd = params.get("send_cmd")

        #listen in dst
        listen_cmd = listen_cmd % (nc_port, "receive")
        session[dst].sendline(listen_cmd)
        time.sleep(2)
        #send file from src to dst
        send_cmd = send_cmd % (vlan_ip[dst], str(nc_port), "file")
        session[src].cmd(send_cmd, timeout=60)
        try:
            session[dst].read_up_to_prompt(timeout=60)
        except kvm_subprocess.ExpectError:
            raise error.TestFail("Fail to receive file"
                                 " from vm%s to vm%s" % (src + 1, dst + 1))
        #check MD5 message digest of receive file in dst
        output = session[dst].cmd_output("md5sum receive").strip()
        digest_receive = re.findall(r'(\w+)', output)[0]
        if digest_receive == digest_origin[src]:
            logging.info("file succeed received in vm %s", vlan_ip[dst])
        else:
            logging.info("digest_origin is  %s", digest_origin[src])
            logging.info("digest_receive is %s", digest_receive)
            raise error.TestFail("File transfered differ from origin")
        session[dst].cmd_output("rm -f receive")

    for i in range(2):
        session.append(vm[i].wait_for_login(
            timeout=int(params.get("login_timeout", 360))))
        if not session[i]:
            raise error.TestError("Could not log into guest(vm%d)" % i)
        logging.info("Logged in")

        ifname.append(
            kvm_test_utils.get_linux_ifname(session[i],
                                            vm[i].get_mac_address()))
        #get guest ip
        vm_ip.append(vm[i].get_address())

        #produce sized file in vm
        dd_cmd = "dd if=/dev/urandom of=file bs=1024k count=%s"
        session[i].cmd(dd_cmd % file_size)
        #record MD5 message digest of file
        output = session[i].cmd("md5sum file", timeout=60)
        digest_origin.append(re.findall(r'(\w+)', output)[0])

        #stop firewall in vm
        session[i].cmd_output("/etc/init.d/iptables stop")

        #load 8021q module for vconfig
        session[i].cmd("modprobe 8021q")

    try:
        for i in range(2):
            for vlan_i in range(1, vlan_num + 1):
                add_vlan(session[i], vlan_i, ifname[i])
                set_ip_vlan(session[i], vlan_i,
                            "%s.%s.%s" % (subnet, vlan_i, ip_unit[i]),
                            ifname[i])
            set_arp_ignore(session[i], ifname[i])

        for vlan in range(1, vlan_num + 1):
            logging.info("Test for vlan %s", vlan)

            logging.info("Ping between vlans")
            interface = ifname[0] + '.' + str(vlan)
            for vlan2 in range(1, vlan_num + 1):
                for i in range(2):
                    interface = ifname[i] + '.' + str(vlan)
                    dest = subnet + '.' + str(vlan2) + '.' + ip_unit[(i + 1) %
                                                                     2]
                    s, o = kvm_test_utils.ping(dest,
                                               count=2,
                                               interface=interface,
                                               session=session[i],
                                               timeout=30)
                    if ((vlan == vlan2) ^ (s == 0)):
                        raise error.TestFail("%s ping %s unexpected" %
                                             (interface, dest))

            vlan_ip[0] = subnet + '.' + str(vlan) + '.' + ip_unit[0]
            vlan_ip[1] = subnet + '.' + str(vlan) + '.' + ip_unit[1]

            logging.info("Flood ping")

            def flood_ping(src, dst):
                # we must use a dedicated session becuase the kvm_subprocess
                # does not have the other method to interrupt the process in
                # the guest rather than close the session.
                session_flood = vm[src].wait_for_login(timeout=60)
                kvm_test_utils.ping(vlan_ip[dst],
                                    flood=True,
                                    interface=ifname[src],
                                    session=session_flood,
                                    timeout=10)
                session_flood.close()

            flood_ping(0, 1)
            flood_ping(1, 0)

            logging.info("Transfering data through nc")
            nc_transfer(0, 1)
            nc_transfer(1, 0)

    finally:
        for vlan in range(1, vlan_num + 1):
            rem_vlan(session[0], vlan, ifname[0])
            rem_vlan(session[1], vlan, ifname[1])
            logging.info("rem vlan: %s", vlan)

    # Plumb/unplumb maximal number of vlan interfaces
    i = 1
    s = 0
    try:
        logging.info("Testing the plumb of vlan interface")
        for i in range(1, maximal + 1):
            add_vlan(session[0], i, ifname[0])
    finally:
        for j in range(1, i + 1):
            s = s or rem_vlan(session[0], j, ifname[0])
        if s == 0:
            logging.info("maximal interface plumb test done")
        else:
            logging.error("maximal interface plumb test failed")

    session[0].close()
    session[1].close()
Exemple #15
0
    output = session.cmd_output("python /tmp/multicast_guest.py %d %s %d" %
                                (mgroup_count, prefix, suffix))

    # if success to join multicast, the process will be paused, and return PID.
    try:
        pid = re.findall("join_mcast_pid:(\d+)", output)[0]
    except IndexError:
        raise error.TestFail("Can't join multicast groups,output:%s" % output)

    try:
        for i in range(mgroup_count):
            new_suffix = suffix + i
            mcast = "%s.%d" % (prefix, new_suffix)

            logging.info("Initial ping test, mcast: %s", mcast)
            s, o = kvm_test_utils.ping(mcast, 10, interface=ifname, timeout=20)
            if s != 0:
                raise error.TestFail(" Ping return non-zero value %s" % o)

            logging.info("Flood ping test, mcast: %s", mcast)
            kvm_test_utils.ping(mcast,
                                None,
                                interface=ifname,
                                flood=True,
                                output_func=None,
                                timeout=flood_minutes * 60)

            logging.info("Final ping test, mcast: %s", mcast)
            s, o = kvm_test_utils.ping(mcast, 10, interface=ifname, timeout=20)
            if s != 0:
                raise error.TestFail("Ping failed, status: %s, output: %s" %
Exemple #16
0
 def flood_ping():
     logging.info("Flood with large frames")
     kvm_test_utils.ping(ip, interface=ifname,
                         packetsize=max_icmp_pkt_size,
                         flood=True, timeout=float(flood_time))
Exemple #17
0
def run_nic_hotplug(test, params, env):
    """
    Test hotplug of NIC devices

    1) Boot up guest with one nic
    2) Add a host network device through monitor cmd and check if it's added
    3) Add nic device through monitor cmd and check if it's added
    4) Check if new interface gets ip address
    5) Disable primary link of guest
    6) Ping guest new ip from host
    7) Delete nic device and netdev
    8) Re-enable primary link of guest

    @param test:   KVM test object.
    @param params: Dictionary with the test parameters.
    @param env:    Dictionary with test environment.
    """
    vm = kvm_test_utils.get_living_vm(env, params.get("main_vm"))
    timeout = int(params.get("login_timeout", 360))
    guest_delay = int(params.get("guest_delay", 20))
    session = kvm_test_utils.wait_for_login(vm, timeout=timeout)
    romfile = params.get("romfile")

    # Modprobe the module if specified in config file
    module = params.get("modprobe_module")
    if module:
        session.get_command_output("modprobe %s" % module)

    def netdev_add(vm):
        netdev_id = kvm_utils.generate_random_id()
        attach_cmd = ("netdev_add tap,id=%s" % netdev_id)
        nic_script = params.get("nic_script")
        if nic_script:
            attach_cmd += ",script=%s" % kvm_utils.get_path(
                vm.root_dir, nic_script)
        netdev_extra_params = params.get("netdev_extra_params")
        if netdev_extra_params:
            attach_cmd += ",%s" % netdev_extra_params
        logging.info("Adding netdev through %s", attach_cmd)
        vm.monitor.cmd(attach_cmd)

        network = vm.monitor.info("network")
        if netdev_id not in network:
            logging.error(network)
            raise error.TestError("Fail to add netdev: %s" % netdev_id)
        else:
            return netdev_id

    def netdev_del(vm, n_id):
        vm.monitor.cmd("netdev_del %s" % n_id)

        network = vm.monitor.info("network")
        if n_id in network:
            logging.error(network)
            raise error.TestError("Fail to remove netdev %s" % n_id)

    def nic_add(vm, model, netdev_id, mac, rom=None):
        """
        Add a nic to virtual machine

        @vm: VM object
        @model: nic model
        @netdev_id: id of netdev
        @mac: Mac address of new nic
        @rom: Rom file
        """
        nic_id = kvm_utils.generate_random_id()
        if model == "virtio":
            model = "virtio-net-pci"
        device_add_cmd = "device_add %s,netdev=%s,mac=%s,id=%s" % (
            model, netdev_id, mac, nic_id)
        if rom:
            device_add_cmd += ",romfile=%s" % rom
        logging.info("Adding nic through %s", device_add_cmd)
        vm.monitor.cmd(device_add_cmd)

        qdev = vm.monitor.info("qtree")
        if not nic_id in qdev:
            logging.error(qdev)
            raise error.TestFail("Device %s was not plugged into qdev"
                                 "tree" % nic_id)
        else:
            return nic_id

    def nic_del(vm, nic_id, wait=True):
        """
        Remove the nic from pci tree.

        @vm: VM object
        @id: the nic id
        @wait: Whether need to wait for the guest to unplug the device
        """
        nic_del_cmd = "device_del %s" % nic_id
        vm.monitor.cmd(nic_del_cmd)
        if wait:
            logging.info("waiting for the guest to finish the unplug")
            if not kvm_utils.wait_for(
                    lambda: nic_id not in vm.monitor.info("qtree"),
                    guest_delay, 5, 1):
                logging.error(vm.monitor.info("qtree"))
                raise error.TestError("Device is not unplugged by "
                                      "guest, please check whether the "
                                      "hotplug module was loaded in guest")

    logging.info("Attach a virtio nic to vm")
    mac = kvm_utils.generate_mac_address(vm.instance, 1)
    if not mac:
        mac = "00:00:02:00:00:02"
    netdev_id = netdev_add(vm)
    device_id = nic_add(vm, "virtio", netdev_id, mac, romfile)

    if "Win" not in params.get("guest_name", ""):
        session.sendline("dhclient %s &" %
                         kvm_test_utils.get_linux_ifname(session, mac))

    logging.info("Shutting down the primary link")
    vm.monitor.cmd("set_link %s down" % vm.netdev_id[0])

    try:
        logging.info("Waiting for new nic's ip address acquisition...")
        if not kvm_utils.wait_for(
                lambda: (vm.address_cache.get(mac) is not None), 10, 1):
            raise error.TestFail("Could not get ip address of new nic")
        ip = vm.address_cache.get(mac)
        if not kvm_utils.verify_ip_address_ownership(ip, mac):
            raise error.TestFail("Could not verify the ip address of new nic")
        else:
            logging.info("Got the ip address of new nic: %s", ip)

        logging.info("Ping test the new nic ...")
        s, o = kvm_test_utils.ping(ip, 100)
        if s != 0:
            logging.error(o)
            raise error.TestFail("New nic failed ping test")

        logging.info("Detaching a virtio nic from vm")
        nic_del(vm, device_id)
        netdev_del(vm, netdev_id)

    finally:
        vm.free_mac_address(1)
        logging.info("Re-enabling the primary link")
        vm.monitor.cmd("set_link %s up" % vm.netdev_id[0])
Exemple #18
0
 def is_mtu_ok():
     s, o = kvm_test_utils.ping(ip, 1, interface=ifname,
                                packetsize=max_icmp_pkt_size,
                                hint="do", timeout=2)
     return s == 0
Exemple #19
0
def run_ping(test, params, env):
    """
    Ping the guest with different size of packets.

    Packet Loss Test:
    1) Ping the guest with different size/interval of packets.

    Stress Test:
    1) Flood ping the guest.
    2) Check if the network is still usable.

    @param test: KVM test object.
    @param params: Dictionary with the test parameters.
    @param env: Dictionary with test environment.
    """
    vm = env.get_vm(params["main_vm"])
    vm.verify_alive()
    session = vm.wait_for_login(timeout=int(params.get("login_timeout", 360)))

    counts = params.get("ping_counts", 100)
    flood_minutes = float(params.get("flood_minutes", 10))
    nics = params.get("nics").split()
    strict_check = params.get("strict_check", "no") == "yes"

    packet_size = [0, 1, 4, 48, 512, 1440, 1500, 1505, 4054, 4055, 4096, 4192,
                   8878, 9000, 32767, 65507]

    try:
        for i, nic in enumerate(nics):
            ip = vm.get_address(i)
            if not ip:
                logging.error("Could not get the ip of nic index %d: %s",
                              i, nic)
                continue

            for size in packet_size:
                logging.info("Ping with packet size %s", size)
                status, output = kvm_test_utils.ping(ip, 10,
                                                     packetsize=size,
                                                     timeout=20)
                if strict_check:
                    ratio = kvm_test_utils.get_loss_ratio(output)
                    if ratio != 0:
                        raise error.TestFail("Loss ratio is %s for packet size"
                                             " %s" % (ratio, size))
                else:
                    if status != 0:
                        raise error.TestFail("Ping failed, status: %s,"
                                             " output: %s" % (status, output))

            logging.info("Flood ping test")
            kvm_test_utils.ping(ip, None, flood=True, output_func=None,
                                timeout=flood_minutes * 60)

            logging.info("Final ping test")
            status, output = kvm_test_utils.ping(ip, counts,
                                                 timeout=float(counts) * 1.5)
            if strict_check:
                ratio = kvm_test_utils.get_loss_ratio(output)
                if ratio != 0:
                    raise error.TestFail("Ping failed, status: %s,"
                                         " output: %s" % (status, output))
            else:
                if status != 0:
                    raise error.TestFail("Ping returns non-zero value %s" %
                                         output)
    finally:
        session.close()
Exemple #20
0
def run_ping(test, params, env):
    """
    Ping the guest with different size of packets.

    Packet Loss Test:
    1) Ping the guest with different size/interval of packets.

    Stress Test:
    1) Flood ping the guest.
    2) Check if the network is still usable.

    @param test: KVM test object.
    @param params: Dictionary with the test parameters.
    @param env: Dictionary with test environment.
    """

    vm = kvm_test_utils.get_living_vm(env, params.get("main_vm"))
    session = kvm_test_utils.wait_for_login(vm)

    counts = params.get("ping_counts", 100)
    flood_minutes = float(params.get("flood_minutes", 10))
    nics = params.get("nics").split()
    strict_check = params.get("strict_check", "no") == "yes"

    packet_size = [0, 1, 4, 48, 512, 1440, 1500, 1505, 4054, 4055, 4096, 4192,
                   8878, 9000, 32767, 65507]

    try:
        for i, nic in enumerate(nics):
            ip = vm.get_address(i)
            if not ip:
                logging.error("Could not get the ip of nic index %d", i)
                continue

            for size in packet_size:
                logging.info("Ping with packet size %s", size)
                status, output = kvm_test_utils.ping(ip, 10,
                                                     packetsize=size,
                                                     timeout=20)
                if strict_check:
                    ratio = kvm_test_utils.get_loss_ratio(output)
                    if ratio != 0:
                        raise error.TestFail("Loss ratio is %s for packet size"
                                             " %s" % (ratio, size))
                else:
                    if status != 0:
                        raise error.TestFail("Ping failed, status: %s,"
                                             " output: %s" % (status, output))

            logging.info("Flood ping test")
            kvm_test_utils.ping(ip, None, flood=True, output_func=None,
                                timeout=flood_minutes * 60)

            logging.info("Final ping test")
            status, output = kvm_test_utils.ping(ip, counts,
                                                 timeout=float(counts) * 1.5)
            if strict_check:
                ratio = kvm_test_utils.get_loss_ratio(output)
                if ratio != 0:
                    raise error.TestFail("Ping failed, status: %s,"
                                         " output: %s" % (status, output))
            else:
                if status != 0:
                    raise error.TestFail("Ping returns non-zero value %s" %
                                         output)
    finally:
        session.close()
Exemple #21
0
def run_vlan(test, params, env):
    """
    Test 802.1Q vlan of NIC, config it by vconfig command.

    1) Create two VMs.
    2) Setup guests in 10 different vlans by vconfig and using hard-coded
       ip address.
    3) Test by ping between same and different vlans of two VMs.
    4) Test by TCP data transfer, floop ping between same vlan of two VMs.
    5) Test maximal plumb/unplumb vlans.
    6) Recover the vlan config.

    @param test: KVM test object.
    @param params: Dictionary with the test parameters.
    @param env: Dictionary with test environment.
    """
    vm = []
    session = []
    ifname = []
    vm_ip = []
    digest_origin = []
    vlan_ip = ['', '']
    ip_unit = ['1', '2']
    subnet = params.get("subnet")
    vlan_num = int(params.get("vlan_num"))
    maximal = int(params.get("maximal"))
    file_size = params.get("file_size")

    vm.append(env.get_vm(params["main_vm"]))
    vm.append(env.get_vm("vm2"))
    for vm_ in vm:
        vm_.verify_alive()

    def add_vlan(session, v_id, iface="eth0"):
        session.cmd("vconfig add %s %s" % (iface, v_id))

    def set_ip_vlan(session, v_id, ip, iface="eth0"):
        iface = "%s.%s" % (iface, v_id)
        session.cmd("ifconfig %s %s" % (iface, ip))

    def set_arp_ignore(session, iface="eth0"):
        ignore_cmd = "echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore"
        session.cmd(ignore_cmd)

    def rem_vlan(session, v_id, iface="eth0"):
        rem_vlan_cmd = "if [[ -e /proc/net/vlan/%s ]];then vconfig rem %s;fi"
        iface = "%s.%s" % (iface, v_id)
        return session.cmd_status(rem_vlan_cmd % (iface, iface))

    def nc_transfer(src, dst):
        nc_port = kvm_utils.find_free_port(1025, 5334, vm_ip[dst])
        listen_cmd = params.get("listen_cmd")
        send_cmd = params.get("send_cmd")

        #listen in dst
        listen_cmd = listen_cmd % (nc_port, "receive")
        session[dst].sendline(listen_cmd)
        time.sleep(2)
        #send file from src to dst
        send_cmd = send_cmd % (vlan_ip[dst], str(nc_port), "file")
        session[src].cmd(send_cmd, timeout=60)
        try:
            session[dst].read_up_to_prompt(timeout=60)
        except kvm_subprocess.ExpectError:
            raise error.TestFail ("Fail to receive file"
                                    " from vm%s to vm%s" % (src+1, dst+1))
        #check MD5 message digest of receive file in dst
        output = session[dst].cmd_output("md5sum receive").strip()
        digest_receive = re.findall(r'(\w+)', output)[0]
        if digest_receive == digest_origin[src]:
            logging.info("file succeed received in vm %s", vlan_ip[dst])
        else:
            logging.info("digest_origin is  %s", digest_origin[src])
            logging.info("digest_receive is %s", digest_receive)
            raise error.TestFail("File transfered differ from origin")
        session[dst].cmd_output("rm -f receive")

    for i in range(2):
        session.append(vm[i].wait_for_login(
            timeout=int(params.get("login_timeout", 360))))
        if not session[i] :
            raise error.TestError("Could not log into guest(vm%d)" % i)
        logging.info("Logged in")

        ifname.append(kvm_test_utils.get_linux_ifname(session[i],
                      vm[i].get_mac_address()))
        #get guest ip
        vm_ip.append(vm[i].get_address())

        #produce sized file in vm
        dd_cmd = "dd if=/dev/urandom of=file bs=1024k count=%s"
        session[i].cmd(dd_cmd % file_size)
        #record MD5 message digest of file
        output = session[i].cmd("md5sum file", timeout=60)
        digest_origin.append(re.findall(r'(\w+)', output)[0])

        #stop firewall in vm
        session[i].cmd_output("/etc/init.d/iptables stop")

        #load 8021q module for vconfig
        session[i].cmd("modprobe 8021q")

    try:
        for i in range(2):
            for vlan_i in range(1, vlan_num+1):
                add_vlan(session[i], vlan_i, ifname[i])
                set_ip_vlan(session[i], vlan_i, "%s.%s.%s" %
                            (subnet, vlan_i, ip_unit[i]), ifname[i])
            set_arp_ignore(session[i], ifname[i])

        for vlan in range(1, vlan_num+1):
            logging.info("Test for vlan %s", vlan)

            logging.info("Ping between vlans")
            interface = ifname[0] + '.' + str(vlan)
            for vlan2 in range(1, vlan_num+1):
                for i in range(2):
                    interface = ifname[i] + '.' + str(vlan)
                    dest = subnet +'.'+ str(vlan2)+ '.' + ip_unit[(i+1)%2]
                    s, o = kvm_test_utils.ping(dest, count=2,
                                              interface=interface,
                                              session=session[i], timeout=30)
                    if ((vlan == vlan2) ^ (s == 0)):
                        raise error.TestFail ("%s ping %s unexpected" %
                                                    (interface, dest))

            vlan_ip[0] = subnet + '.' + str(vlan) + '.' + ip_unit[0]
            vlan_ip[1] = subnet + '.' + str(vlan) + '.' + ip_unit[1]

            logging.info("Flood ping")
            def flood_ping(src, dst):
                # we must use a dedicated session becuase the kvm_subprocess
                # does not have the other method to interrupt the process in
                # the guest rather than close the session.
                session_flood = vm[src].wait_for_login(timeout=60)
                kvm_test_utils.ping(vlan_ip[dst], flood=True,
                                   interface=ifname[src],
                                   session=session_flood, timeout=10)
                session_flood.close()

            flood_ping(0, 1)
            flood_ping(1, 0)

            logging.info("Transfering data through nc")
            nc_transfer(0, 1)
            nc_transfer(1, 0)

    finally:
        for vlan in range(1, vlan_num+1):
            rem_vlan(session[0], vlan, ifname[0])
            rem_vlan(session[1], vlan, ifname[1])
            logging.info("rem vlan: %s", vlan)

    # Plumb/unplumb maximal number of vlan interfaces
    i = 1
    s = 0
    try:
        logging.info("Testing the plumb of vlan interface")
        for i in range (1, maximal+1):
            add_vlan(session[0], i, ifname[0])
    finally:
        for j in range (1, i+1):
            s = s or rem_vlan(session[0], j, ifname[0])
        if s == 0:
            logging.info("maximal interface plumb test done")
        else:
            logging.error("maximal interface plumb test failed")

    session[0].close()
    session[1].close()
Exemple #22
0
def run_nic_hotplug(test, params, env):
    """
    Test hotplug of NIC devices

    1) Boot up guest with one nic
    2) Add a host network device through monitor cmd and check if it's added
    3) Add nic device through monitor cmd and check if it's added
    4) Check if new interface gets ip address
    5) Disable primary link of guest
    6) Ping guest new ip from host
    7) Delete nic device and netdev
    8) Re-enable primary link of guest

    @param test:   KVM test object.
    @param params: Dictionary with the test parameters.
    @param env:    Dictionary with test environment.
    """
    vm = kvm_test_utils.get_living_vm(env, params.get("main_vm"))
    timeout = int(params.get("login_timeout", 360))
    guest_delay = int(params.get("guest_delay", 20))
    session_serial = kvm_test_utils.wait_for_login(vm, timeout=timeout,
                                                   serial=True)

    # Modprobe the module if specified in config file
    module = params.get("modprobe_module")
    if module:
        session_serial.get_command_output("modprobe %s" % module)

    def netdev_add(vm):
        netdev_id = kvm_utils.generate_random_id()
        attach_cmd = ("netdev_add tap,id=%s,script=%s" %
                      (netdev_id, kvm_utils.get_path(vm.root_dir,
                                                     params.get("nic_script"))))
        netdev_extra_params = params.get("netdev_extra_params")
        if netdev_extra_params:
            attach_cmd += ",%s" % netdev_extra_params
        logging.info("Adding netdev through %s", attach_cmd)
        vm.monitor.cmd(attach_cmd)

        network = vm.monitor.info("network")
        if netdev_id not in network:
            logging.error(network)
            raise error.TestError("Fail to add netdev: %s" % netdev_id)
        else:
            return netdev_id

    def netdev_del(vm, n_id):
        vm.monitor.cmd("netdev_del %s" % n_id)

        network = vm.monitor.info("network")
        if n_id in network:
            logging.error(network)
            raise error.TestError("Fail to remove netdev %s" % n_id)

    def nic_add(vm, model, netdev_id, mac):
        """
        Add a nic to virtual machine

        @vm: VM object
        @model: nic model
        @netdev_id: id of netdev
        @mac: Mac address of new nic
        """
        nic_id = kvm_utils.generate_random_id()
        if model == "virtio":
            model = "virtio-net-pci"
        device_add_cmd = "device_add %s,netdev=%s,mac=%s,id=%s" % (model,
                                                                   netdev_id,
                                                                   mac, nic_id)
        logging.info("Adding nic through %s", device_add_cmd)
        vm.monitor.cmd(device_add_cmd)

        qdev = vm.monitor.info("qtree")
        if id not in qdev:
            logging.error(qdev)
            raise error.TestFail("Device %s was not plugged into qdev"
                                 "tree" % nic_id)
        else:
            return nic_id

    def nic_del(vm, nic_id, wait=True):
        """
        Remove the nic from pci tree.

        @vm: VM object
        @id: the nic id
        @wait: Whether need to wait for the guest to unplug the device
        """
        nic_del_cmd = "device_del %s" % nic_id
        vm.monitor.cmd(nic_del_cmd)
        if wait:
            logging.info("waiting for the guest to finish the unplug")
            if not kvm_utils.wait_for(lambda: nic_id not in
                                      vm.monitor.info("qtree"),
                                      guest_delay, 5 ,1):
                logging.error(vm.monitor.info("qtree"))
                raise error.TestError("Device is not unplugged by "
                                      "guest, please check whether the "
                                      "hotplug module was loaded in guest")

    logging.info("Attach a virtio nic to vm")
    mac = kvm_utils.generate_mac_address(vm.instance, 1)
    if not mac:
        mac = "00:00:02:00:00:02"
    netdev_id = netdev_add(vm)
    device_id = nic_add(vm, "virtio", netdev_id, mac)

    if "Win" not in params.get("guest_name", ""):
        session_serial.sendline("dhclient %s &" %
                         kvm_test_utils.get_linux_ifname(session_serial, mac))

    logging.info("Shutting down the primary link")
    vm.monitor.cmd("set_link %s down" % vm.netdev_id[0])

    try:
        logging.info("Waiting for new nic's ip address acquisition...")
        if not kvm_utils.wait_for(lambda: (vm.address_cache.get(mac) is
                                           not None), 10, 1):
            raise error.TestFail("Could not get ip address of new nic")
        ip = vm.address_cache.get(mac)
        if not kvm_utils.verify_ip_address_ownership(ip, mac):
            raise error.TestFail("Could not verify the ip address of new nic")
        else:
            logging.info("Got the ip address of new nic: %s", ip)

        logging.info("Ping test the new nic ...")
        s, o = kvm_test_utils.ping(ip, 100)
        if s != 0:
            logging.error(o)
            raise error.TestFail("New nic failed ping test")

        logging.info("Detaching a virtio nic from vm")
        nic_del(vm, device_id)
        netdev_del(vm, netdev_id)

    finally:
        vm.free_mac_address(1)
        logging.info("Re-enabling the primary link")
        vm.monitor.cmd("set_link %s up" % vm.netdev_id[0])