def calc_metric_full(self):
# flat.print_log_msg('Removing existing matrix output file')
# try:
# os.remove(cnst.const['out_matrix_delim'])
# except OSError:
# pass
if not self.dynamic_delete:
raise Exception('Error: dynamic delete must be True for metric calculation!')
flat.print_log_msg('Start metric')
curr_breakpoint_index = 0
block_height = 0
block_width = 0
total_N_SNPs = decimal.Decimal('0')
block_width_sum = decimal.Decimal('0')
# pre-read all relevant partitions at beginning!
last_p_num = -1
for p_num_init in range(0, len(self.partitions)-1):
if self.snp_first >= self.partitions[p_num_init+1][0]:
flat.print_log_msg('Pre-reading partition: '+str(self.partitions[p_num_init]))
flat.read_partition_into_matrix(self.partitions, p_num_init, self.matrix, self.locus_list, self.name, self.input_config, self.snp_first, self.snp_last)
last_p_num = p_num_init
else:
break
curr_locus = -1
# for p_num, p in enumerate(self.partitions):
for p_num in range(last_p_num+1, len(self.partitions)):
p = self.partitions[p_num]
flat.print_log_msg('Reading partition: '+str(p))
flat.read_partition_into_matrix(self.partitions, p_num, self.matrix, self.locus_list, self.name, self.input_config, self.snp_first, self.snp_last)
# Determine first locus
if curr_locus<0: # Either first partition or not found in first partition
# curr_locus = -1 # <- this should have been set to -1 before entering the main for loop
if len(self.locus_list)>0:
# Find first locus >= snp_first
for i, locus in enumerate(self.locus_list):
if locus >= self.snp_first:
curr_locus = locus
start_locus = locus
curr_locus_index = i
start_locus_index = i
break
else:
raise Exception('Error: locus_list seems to be empty')
# else:
# if len(self.locus_list)>0:
# curr_locus = self.locus_list[0]
# curr_locus_index = 0
# else:
# raise Exception('Error: locus_list seems to be empty')
else:
try:
curr_locus_index = self.locus_list.index(curr_locus)
# curr_locus is carried from prev iteration, but index has changed since part of matrix (and locus_list) has been deleted
except ValueError:
if len(self.locus_list)>0:
curr_locus = self.locus_list[0]
curr_locus_index = 0
else:
raise Exception('Error: locus_list seems to be empty')
if curr_locus<0:
flat.print_log_msg('Warning: curr_locus not found! Continuing to next partition.')
flat.print_log_msg('Comment: This is possibly due to snp_first being very close to end of partition.')
flat.print_log_msg('Details: ')
flat.print_log_msg('Partition: '+repr(p))
flat.print_log_msg('snp_first: '+repr(self.snp_first))
flat.print_log_msg('curr_locus: '+repr(curr_locus))
continue #continue to next partition
# raise Exception('Error: curr_locus not found!')
# Determine last locus
if p_num+1 < len(self.partitions):
end_locus = self.partitions[p_num+1][0]
end_locus_index = -1
else:
# end_locus = self.partitions[p_num][1]
# Find last locus <= snp_last
end_locus_found = False
for i in reversed(range(0, len(self.locus_list))):
# for locus in reversed(locus_list):
if self.locus_list[i] <= self.snp_last:
end_locus = self.locus_list[i]
end_locus_index = i
end_locus_found = True
break
if not end_locus_found:
end_locus_index = 0
end_locus = self.locus_list[end_locus_index]
flat.print_log_msg('Running metric for partition: '+str(p))
# This will not include the very last SNP of the complete range, but that shouldn't be too important since the end of the range shouldn't be a defining location for LD
while curr_locus <= end_locus:
if curr_breakpoint_index<len(self.breakpoints):
if curr_locus > self.breakpoints[curr_breakpoint_index]: # Breakpoint is the last element of the block!
# block_height = len(self.locus_list) - curr_locus_index
block_height = 0 - total_N_SNPs # - 1 # ? # this is in accordance with the formula for deferred sum calculation
self.metric['N_zero'] += block_height * block_width
block_width_sum += block_width
curr_breakpoint_index += 1
block_width = 0
if curr_breakpoint_index>=len(self.breakpoints):
break
# found = False
try:
for key, el in self.matrix[curr_locus]['data'].items():
if key > self.breakpoints[curr_breakpoint_index]: # Only add those above the breakpoint!
corr_coeff = self.matrix[curr_locus]['data'][key]['shrink'] / math.sqrt( self.matrix[curr_locus]['data'][curr_locus]['shrink'] * self.matrix[key]['data'][key]['shrink'] )
self.metric['sum'] += decimal.Decimal(corr_coeff**2)
self.metric['N_nonzero'] += 1
# found = True
except IndexError as e:
print('Error!')
print(e)
print(key, el)
print(curr_locus)
print(self.matrix)
print(self.breakpoints)
print(curr_breakpoint_index)
# if found:
block_width += 1 # block_width needs to be increased even if it doesn't have values in the outer part of the matrix!
if curr_locus_index+1 < len(self.locus_list):
curr_locus_index+=1
curr_locus = self.locus_list[curr_locus_index]
total_N_SNPs += 1
else:
flat.print_log_msg('curr_locus_index out of bounds')
break
# if block_width > 0: # If an LD block hasn't finished, but a new partition must be read into memory
# # index_of_breakpoint_in_locus_list = -1
# for ind in range(curr_locus_index, len(self.locus_list)):
# if self.locus_list[ind] >= self.breakpoints[curr_breakpoint_index]:
# # index_of_breakpoint_in_locus_list = ind
# break
#
# num_of_SNPs_to_add = ind - curr_locus_index
#
# # if index_of_breakpoint_in_locus_list < 0:
# # raise Exception('Error: index_of_breakpoint_in_locus_list not found!')
#
# # block_height = len(self.locus_list) - index_of_breakpoint_in_locus_list
# block_height = 0 - (total_N_SNPs+num_of_SNPs_to_add)
# self.metric['N_zero'] += block_height * block_width
#
# block_width_sum += block_width
# block_width = 0
# flat.delete_loci_smaller_than_and_output_matrix_to_file(end_locus, self.matrix, locus_list, locus_list_deleted, cnst.const['out_matrix_filename'])
if self.dynamic_delete:
flat.print_log_msg('Deleting loci not required any more')
flat.delete_loci_smaller_than(end_locus, self.matrix, self.locus_list, self.locus_list_deleted)
self.start_locus = start_locus
self.start_locus_index = start_locus_index
self.end_locus = end_locus
self.end_locus_index = end_locus_index
self.metric['N_zero'] += total_N_SNPs * block_width_sum # this is in accordance with the formula for deferred sum calculation
print('total_N_SNPs, block_width', total_N_SNPs, block_width)
print('total_N_SNPs-block_width', total_N_SNPs-block_width)
print('block_width_sum', block_width_sum)
self.calculation_complete = True
return self.metric
def calc_vert(self, dynamic_delete=True, sum_both_sides=True):
# flat.print_log_msg('Removing existing matrix output file')
# try:
# os.remove(cnst.const['out_matrix_delim'])
# except OSError:
# pass
raise Exception('calc_vert is deprecated - check code before running!')
self.dynamic_delete = dynamic_delete
flat.print_log_msg('Start')
for p_num, p in enumerate(self.partitions):
flat.print_log_msg('Reading partition: ' + str(p))
flat.read_partition_into_matrix(self.partitions, p_num,
self.matrix, self.locus_list,
self.name, self.input_config,
self.snp_first, self.snp_last)
# Determine first locus
curr_locus = -1
if p_num == 0:
if len(self.locus_list) > 0:
# Find first locus >= snp_first
for i, locus in enumerate(self.locus_list):
if locus >= self.snp_first:
curr_locus = locus
start_locus = locus
curr_locus_index = i
start_locus_index = i
break
else:
raise Exception('Error: locus_list seems to be empty')
else:
if len(self.locus_list) > 0:
curr_locus = self.locus_list[0]
curr_locus_index = 0
else:
raise Exception('Error: locus_list seems to be empty')
if curr_locus < 0:
raise Exception('Error: curr_locus not found!')
if p_num + 1 < len(self.partitions):
end_locus = self.partitions[p_num + 1][0]
end_locus_index = -1
else:
# end_locus = partitions[p_num][1]
# Find last locus <= snp_last
for i in reversed(range(0, len(self.locus_list))):
# for locus in reversed(locus_list):
if self.locus_list[i] <= self.snp_last:
end_locus = self.locus_list[i]
end_locus_index = i
break
flat.print_log_msg('Running for partition: ' + str(p))
# This will not include the very last SNP of the complete range, but that shouldn't be too important since the end of the range shouldn't be a defining location for LD
while curr_locus < end_locus:
for key, el in self.matrix[curr_locus]['data'].items():
corr_coeff = self.matrix[curr_locus]['data'][key][
'shrink'] / math.sqrt(
self.matrix[curr_locus]['data'][curr_locus]
['shrink'] *
self.matrix[key]['data'][key]['shrink'])
self.add_corr_coeff(corr_coeff, curr_locus)
if sum_both_sides:
self.add_corr_coeff(corr_coeff, key)
# Just save it in the matrix ;)
self.matrix[curr_locus]['data'][key][
'corr_coeff'] = corr_coeff
if curr_locus_index + 1 < len(self.locus_list):
curr_locus_index += 1
curr_locus = self.locus_list[curr_locus_index]
else:
flat.print_log_msg('curr_locus_index out of bounds')
break
# flat.delete_loci_smaller_than_and_output_matrix_to_file(end_locus, self.matrix, locus_list, locus_list_deleted, cnst.const['out_matrix_filename'])
if self.dynamic_delete:
flat.print_log_msg('Deleting loci not required any more')
flat.delete_loci_smaller_than(end_locus, self.matrix,
self.locus_list,
self.locus_list_deleted)
self.start_locus = start_locus
self.start_locus_index = start_locus_index
self.end_locus = end_locus
self.end_locus_index = end_locus_index
self.calculation_complete = True
def calc_diag(self, dynamic_delete=True):
# flat.print_log_msg('Removing existing matrix output file')
# try:
# os.remove(cnst.const['out_matrix_delim'])
# except OSError:
# pass
self.dynamic_delete = dynamic_delete
flat.print_log_msg('Start')
# pre-read all relevant partitions at beginning!
last_p_num = -1
for p_num_init in range(0, len(self.partitions) - 1):
if self.snp_first >= self.partitions[p_num_init + 1][0]:
flat.print_log_msg('Pre-reading partition: ' +
str(self.partitions[p_num_init]))
flat.read_partition_into_matrix(self.partitions, p_num_init,
self.matrix, self.locus_list,
self.name, self.input_config,
self.snp_first, self.snp_last)
last_p_num = p_num_init
else:
break
curr_locus = -1
# for p_num, p in enumerate(self.partitions):
for p_num in range(last_p_num + 1, len(self.partitions)):
p = self.partitions[p_num]
flat.print_log_msg('Reading partition: ' + str(p))
flat.read_partition_into_matrix(self.partitions, p_num,
self.matrix, self.locus_list,
self.name, self.input_config,
self.snp_first, self.snp_last)
# Determine first locus
if curr_locus < 0: # Either first partition or not found in first partition
# curr_locus = -1 # <- this should have been set to -1 before entering the main for loop
if len(self.locus_list) > 0:
# Find first locus >= snp_first
for i, locus in enumerate(self.locus_list):
if locus >= self.snp_first:
curr_locus = locus
start_locus = locus
curr_locus_index = i
start_locus_index = i
break
else:
raise Exception('Error: locus_list seems to be empty')
# else:
# if len(self.locus_list)>0:
# curr_locus = self.locus_list[0]
# curr_locus_index = 0
# else:
# raise Exception('Error: locus_list seems to be empty')
else:
try:
curr_locus_index = self.locus_list.index(curr_locus)
# curr_locus is carried from prev iteration, but index has changed since part of matrix (and locus_list) has been deleted
except ValueError:
if len(self.locus_list) > 0:
curr_locus = self.locus_list[0]
curr_locus_index = 0
else:
raise Exception('Error: locus_list seems to be empty')
if curr_locus < 0:
flat.print_log_msg(
'Warning: curr_locus not found! Continuing to next partition.'
)
flat.print_log_msg(
'Comment: This is possibly due to snp_first being very close to end of partition.'
)
flat.print_log_msg('Details: ')
flat.print_log_msg('Partition: ' + repr(p))
flat.print_log_msg('snp_first: ' + repr(self.snp_first))
flat.print_log_msg('curr_locus: ' + repr(curr_locus))
continue #continue to next partition
# raise Exception('Error: curr_locus not found!')
# Determine end locus
if p_num + 1 < len(self.partitions):
end_locus = int(
(self.partitions[p_num][1] + self.partitions[p_num + 1][0])
/ 2)
else:
# end_locus = self.partitions[p_num][1]
# Find last locus <= snp_last
end_locus_found = False
for i in reversed(range(0, len(self.locus_list))):
# for locus in reversed(locus_list):
if self.locus_list[i] <= self.snp_last:
end_locus = self.locus_list[i]
end_locus_index = i
end_locus_found = True
break
if not end_locus_found:
end_locus_index = 0
end_locus = self.locus_list[end_locus_index]
flat.print_log_msg('Running for partition: ' + str(p))
# This will not include the very last SNP of the complete range, but that shouldn't be too important since the end of the range shouldn't be a defining location for LD
while curr_locus <= end_locus:
x = self.locus_list[curr_locus_index]
y = self.locus_list[curr_locus_index]
delta = 0
while x >= self.partitions[p_num][0] and y <= self.partitions[
p_num][1]:
if x in self.matrix and y in self.matrix[x]['data']:
corr_coeff = self.matrix[x]['data'][y][
'shrink'] / math.sqrt(
self.matrix[x]['data'][x]['shrink'] *
self.matrix[y]['data'][y]['shrink'])
self.add_corr_coeff(corr_coeff, curr_locus)
# Just save it in the matrix ;) ...for img
self.matrix[x]['data'][y]['corr_coeff'] = corr_coeff
if delta != 0:
x = self.locus_list[curr_locus_index - delta + 1]
if x in self.matrix and y in self.matrix[x]['data']:
corr_coeff = self.matrix[x]['data'][y][
'shrink'] / math.sqrt(
self.matrix[x]['data'][x]['shrink'] *
self.matrix[y]['data'][y]['shrink'])
self.add_corr_coeff(corr_coeff, curr_locus)
# Just save it in the matrix ;) ...for img
self.matrix[x]['data'][y][
'corr_coeff'] = corr_coeff
delta += 1
if curr_locus_index - delta >= 0:
x = self.locus_list[curr_locus_index - delta]
else:
# flat.print_log_msg('X index out of bounds')
break
if curr_locus_index + delta < len(self.locus_list):
y = self.locus_list[curr_locus_index + delta]
else:
# flat.print_log_msg('Y index out of bounds')
break
if curr_locus_index + 1 < len(self.locus_list):
curr_locus_index += 1
curr_locus = self.locus_list[curr_locus_index]
else:
flat.print_log_msg('curr_locus_index out of bounds')
break
# flat.delete_loci_smaller_than_and_output_matrix_to_file(end_locus, self.matrix, locus_list, locus_list_deleted, cnst.const['out_matrix_filename'])
if self.dynamic_delete:
flat.print_log_msg('Deleting loci not required any more')
if p_num + 1 < len(self.partitions):
delete_loc = self.partitions[p_num +
1][0] # diag - specific
else:
delete_loc = end_locus
flat.delete_loci_smaller_than(delete_loc, self.matrix,
self.locus_list,
self.locus_list_deleted)
else:
flat.print_log_msg('locus_list size: ' +
repr(len(self.locus_list)))
self.start_locus = start_locus
self.start_locus_index = start_locus_index
self.end_locus = end_locus
self.end_locus_index = end_locus_index
self.calculation_complete = True
def init_search_full(self):
# flat.print_log_msg('Removing existing matrix output file')
# try:
# os.remove(cnst.const['out_matrix_delim'])
# except OSError:
# pass
if not self.dynamic_delete:
raise Exception(
'Error: dynamic_delete should be True for local search!')
flat.print_log_msg('Start local search init')
# pre-read all relevant partitions at beginning!
last_p_num = -1
for p_num_init in range(0, len(self.partitions) - 1):
if self.snp_bottom >= self.partitions[p_num_init + 1][0]:
flat.print_log_msg('Pre-reading partition: ' +
str(self.partitions[p_num_init]))
flat.read_partition_into_matrix(self.partitions, p_num_init,
self.matrix, self.locus_list,
self.name, self.input_config,
self.snp_bottom, self.snp_top)
last_p_num = p_num_init
else:
break
curr_locus = -1
# for p_num, p in enumerate(self.partitions):
for p_num in range(last_p_num + 1, len(self.partitions)):
p = self.partitions[p_num]
flat.print_log_msg('Reading partition: ' + str(p))
# Data must be read until snp_top!
flat.read_partition_into_matrix(self.partitions, p_num,
self.matrix, self.locus_list,
self.name, self.input_config,
self.snp_bottom, self.snp_top)
# Determine first locus
if curr_locus < 0: # Either first partition or not found in first partition
# curr_locus = -1 # <- this should have been set to -1 before entering the main for loop
if len(self.locus_list) > 0:
# Find first locus >= snp_bottom
for i, locus in enumerate(self.locus_list):
if locus >= self.snp_bottom:
curr_locus = locus
start_locus = locus
curr_locus_index = i
start_locus_index = i
break
else:
raise Exception('Error: locus_list seems to be empty')
# else:
# if len(self.locus_list)>0:
# curr_locus = self.locus_list[0]
# curr_locus_index = 0
# else:
# raise Exception('Error: locus_list seems to be empty')
else:
try:
curr_locus_index = self.locus_list.index(curr_locus)
# curr_locus is carried from prev iteration, but index has changed since part of matrix (and locus_list) has been deleted
except ValueError:
if len(self.locus_list) > 0:
curr_locus = self.locus_list[0]
curr_locus_index = 0
else:
raise Exception('Error: locus_list seems to be empty')
if curr_locus < 0:
flat.print_log_msg(
'Warning: curr_locus not found! Continuing to next partition.'
)
flat.print_log_msg(
'Comment: This is possibly due to snp_bottom being very close to end of partition.'
)
flat.print_log_msg('Details: ')
flat.print_log_msg('Partition: ' + repr(p))
flat.print_log_msg('snp_bottom: ' + repr(self.snp_bottom))
flat.print_log_msg('curr_locus: ' + repr(curr_locus))
continue #continue to next partition
# raise Exception('Error: curr_locus not found!')
if p_num + 1 < len(self.partitions):
end_locus = self.partitions[p_num + 1][0]
end_locus_index = -1
else:
# end_locus = self.partitions[p_num][1]
# Find last locus <= snp_last
end_locus_found = False
for i in reversed(range(0, len(self.locus_list))):
# for locus in reversed(locus_list):
if self.locus_list[i] <= self.snp_last:
end_locus = self.locus_list[i]
end_locus_index = i
end_locus_found = True
break
if not end_locus_found:
end_locus_index = 0
end_locus = self.locus_list[end_locus_index]
# flat.print_log_msg('self.locus_list control output: '+repr(self.locus_list))
flat.print_log_msg('Running precompute for partition: ' + str(p))
flat.print_log_msg('start_locus: ' + repr(start_locus) +
' end_locus: ' + repr(end_locus) +
' end_locus_index ' + repr(end_locus_index))
# This will not include the very last SNP of the complete range, but that shouldn't be too important since the end of the range shouldn't be a defining location for LD
while curr_locus <= end_locus:
self.add_locus_to_precomputed(
curr_locus
) # We want snp_bottom to be added here always (for later use). Same thing for snp_top
# flat.print_log_msg('curr_locus: '+repr(curr_locus)+' end_locus: '+repr(end_locus))
if (
curr_locus > self.snp_first
or self.initial_breakpoint_index == 0
) and (
curr_locus <= self.snp_last
): # Do not include snp_first in the calculation unless the very first block is being taken into account. Do not calculate anything above snp_last, just insert dummies
for key, el in self.matrix[curr_locus]['data'].items():
# don't take into account anything over snp_top
if key <= self.snp_top:
corr_coeff = self.matrix[curr_locus]['data'][key][
'shrink'] / math.sqrt(
self.matrix[curr_locus]['data'][curr_locus]
['shrink'] *
self.matrix[key]['data'][key]['shrink'])
# if curr_locus != key: # Don't include diagonal! ...although not that important.
self.add_val_to_precomputed(
decimal.Decimal(corr_coeff**2), curr_locus, key
) # If the diagonal is included, it doesn't matter because later we add and subtract is exactly once when adding and subra
# else:
# self.add_val_to_precomputed(decimal.Decimal(0), curr_locus, key)
else:
self.add_val_to_precomputed(
decimal.Decimal(0), curr_locus, curr_locus
) # Dummy value for snp_first! ...in order to be consistent for some other future use of these data structures
if curr_locus_index + 1 < len(self.locus_list):
curr_locus_index += 1
curr_locus = self.locus_list[curr_locus_index]
else:
flat.print_log_msg(
'curr_locus_index out of bounds'
) # The possibility of this happening is only at the end of the range [usually chromosome] (end of last partition)
break
# flat.delete_loci_smaller_than_and_output_matrix_to_file(end_locus, self.matrix, locus_list, locus_list_deleted, cnst.const['out_matrix_filename'])
if self.dynamic_delete:
flat.print_log_msg('Deleting loci not required any more')
flat.delete_loci_smaller_than(end_locus, self.matrix,
self.locus_list,
self.locus_list_deleted)
self.start_locus = start_locus
self.start_locus_index = start_locus_index
self.end_locus = end_locus
self.end_locus_index = end_locus_index
self.init_complete = True
