def __init__(self, sys_clk_freq=int(150e6), ddram_channel=0, with_pcie=False, with_led_chaser=False, with_hbm=False, **kwargs):
platform = alveo_u280.Platform()
if with_hbm:
assert 225e6 <= sys_clk_freq <= 450e6
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self, platform, sys_clk_freq,
ident = "LiteX SoC on Alveo U280 (ES1)",
ident_version = True,
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq, ddram_channel, with_hbm)
if with_hbm:
# JTAGBone --------------------------------------------------------------------------------
self.add_jtagbone(chain=2) # Chain 1 already used by HBM2 debug probes.
# Add HBM Core.
self.submodules.hbm = hbm = ClockDomainsRenamer({"axi": "sys"})(HBMIP(platform))
# Connect four of the HBM's AXI interfaces to the main bus of the SoC.
for i in range(4):
axi_hbm = hbm.axi[i]
axi_lite_hbm = AXILiteInterface(data_width=256, address_width=33)
self.submodules += AXILite2AXI(axi_lite_hbm, axi_hbm)
self.bus.add_slave(f"hbm{i}", axi_lite_hbm, SoCRegion(origin=0x4000_0000 + 0x1000_0000*i, size=0x1000_0000)) # 256MB.
else:
# DDR4 SDRAM -------------------------------------------------------------------------------
if not self.integrated_main_ram_size:
self.submodules.ddrphy = usddrphy.USPDDRPHY(platform.request("ddram", ddram_channel),
memtype = "DDR4",
cmd_latency = 1, # seems to work better with cmd_latency=1
sys_clk_freq = sys_clk_freq,
iodelay_clk_freq = 600e6,
is_rdimm = True)
self.add_sdram("sdram",
phy = self.ddrphy,
module = MTA18ASF2G72PZ(sys_clk_freq, "1:4"),
size = 0x40000000,
l2_cache_size = kwargs.get("l2_size", 8192)
)
# Firmware RAM (To ease initial LiteDRAM calibration support) ------------------------------
self.add_ram("firmware_ram", 0x20000000, 0x8000)
# PCIe -------------------------------------------------------------------------------------
if with_pcie:
self.submodules.pcie_phy = USPPCIEPHY(platform, platform.request("pcie_x4"),
data_width = 128,
bar0_size = 0x20000)
self.add_pcie(phy=self.pcie_phy, ndmas=1)
# Leds -------------------------------------------------------------------------------------
if with_led_chaser:
self.submodules.leds = LedChaser(
pads = platform.request_all("gpio_led"),
sys_clk_freq = sys_clk_freq)
def __init__(self,
sys_clk_freq=int(125e6),
ddram_channel=0,
with_pcie=False,
**kwargs):
platform = alveo_u280.Platform()
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self,
platform,
sys_clk_freq,
ident="LiteX SoC on Alveo U280",
ident_version=True,
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq, ddram_channel)
# DDR4 SDRAM -------------------------------------------------------------------------------
if not self.integrated_main_ram_size:
self.submodules.ddrphy = usddrphy.USPDDRPHY(
platform.request("ddram", ddram_channel),
memtype="DDR4",
sys_clk_freq=sys_clk_freq,
iodelay_clk_freq=500e6,
is_rdimm=True)
self.add_sdram("sdram",
phy=self.ddrphy,
module=MTA18ASF2G72PZ(sys_clk_freq, "1:4"),
origin=self.mem_map["main_ram"],
size=kwargs.get("max_sdram_size", 0x40000000),
l2_cache_size=kwargs.get("l2_size", 8192),
l2_cache_min_data_width=kwargs.get(
"min_l2_data_width", 128),
l2_cache_reverse=True)
# Firmware RAM (To ease initial LiteDRAM calibration support) ------------------------------
self.add_ram("firmware_ram", 0x20000000, 0x8000)
# PCIe -------------------------------------------------------------------------------------
if with_pcie:
self.submodules.pcie_phy = USPPCIEPHY(platform,
platform.request("pcie_x4"),
data_width=128,
bar0_size=0x20000)
self.add_pcie(phy=self.pcie_phy, ndmas=1)
# Leds -------------------------------------------------------------------------------------
self.submodules.leds = LedChaser(pads=platform.request_all("gpio_led"),
sys_clk_freq=sys_clk_freq)