def __init__(
self,
_id,
_name,
_vpd83,
_block_size,
_num_of_blocks,
_admin_state,
_system_id,
_pool_id,
_plugin_data=None,
):
self._id = _id # Identifier
self._name = _name # Human recognisable name
if _vpd83 and not Volume.vpd83_verify(_vpd83):
raise LsmError(
ErrorNumber.INVALID_ARGUMENT,
"Incorrect format of VPD 0x83 NAA(3) string: '%s', "
"expecting 32 or 16 lower case hex characters" % _vpd83,
)
self._vpd83 = _vpd83 # SCSI page 83 unique ID
self._block_size = _block_size # Block size
self._num_of_blocks = _num_of_blocks # Number of blocks
self._admin_state = _admin_state # enable or disabled by admin
self._system_id = _system_id # System id this volume belongs
self._pool_id = _pool_id # Pool id this volume belongs
self._plugin_data = _plugin_data
def initiator_id_verify(init_id, init_type=None, raise_exception=False):
"""
Public method which can be used to verify an initiator id
:param init_id:
:param init_type:
:param raise_exception: Will throw a LsmError INVALID_ARGUMENT if
not a valid initiator address
:return:(Bool, init_type, init_id) Note: init_id will be returned in
normalized format if it's a WWPN
"""
if init_id.startswith('iqn') or init_id.startswith(
'eui') or init_id.startswith('naa'):
if init_type is None or init_type == AccessGroup.INIT_TYPE_ISCSI_IQN:
return True, AccessGroup.INIT_TYPE_ISCSI_IQN, init_id
if AccessGroup._regex_wwpn.match(str(init_id)):
if init_type is None or init_type == AccessGroup.INIT_TYPE_WWPN:
return (True, AccessGroup.INIT_TYPE_WWPN,
AccessGroup._wwpn_to_lsm_type(init_id))
if raise_exception:
raise LsmError(
ErrorNumber.INVALID_ARGUMENT,
"Initiator id '%s' is invalid" % init_id,
)
return False, None, None
def link_type(self):
"""
Integer. New in version 1.3.
Link type, possible values are:
lsm.Disk.LINK_TYPE_UNKNOWN
Failed to detect link type
lsm.Disk.LINK_TYPE_FC
Fibre Channel
lsm.Disk.LINK_TYPE_SSA
Serial Storage Architecture, Old IBM tech.
lsm.Disk.LINK_TYPE_SBP
Serial Bus Protocol, used by IEEE 1394.
lsm.Disk.LINK_TYPE_SRP
SCSI RDMA Protocol
lsm.Disk.LINK_TYPE_ISCSI
Internet Small Computer System Interface
lsm.Disk.LINK_TYPE_SAS
Serial Attached SCSI
lsm.Disk.LINK_TYPE_ADT
Automation/Drive Interface Transport
Protocol, often used by Tape.
lsm.Disk.LINK_TYPE_ATA
PATA/IDE or SATA.
lsm.Disk.LINK_TYPE_USB
USB disk.
lsm.Disk.LINK_TYPE_SOP
SCSI over PCI-E
lsm.Disk.LINK_TYPE_PCIE
PCI-E, e.g. NVMe
"""
if self._link_type == Disk.LINK_TYPE_NO_SUPPORT:
raise LsmError(ErrorNumber.NO_SUPPORT,
"Disk.link_type is not supported by this plugin "
"yet")
return self._link_type
def __init__(
self,
_id,
_name,
_disk_type,
_block_size,
_num_of_blocks,
_status,
_system_id,
_plugin_data=None,
_vpd83="",
_location="",
_rpm=RPM_NO_SUPPORT,
_link_type=LINK_TYPE_NO_SUPPORT,
):
self._id = _id
self._name = _name
self._disk_type = _disk_type
self._block_size = _block_size
self._num_of_blocks = _num_of_blocks
self._status = _status
self._system_id = _system_id
self._plugin_data = _plugin_data
if _vpd83 and not Volume.vpd83_verify(_vpd83):
raise LsmError(
ErrorNumber.INVALID_ARGUMENT,
"Incorrect format of VPD 0x83 NAA(3) string: '%s', "
"expecting 32 or 16 lower case hex characters" % _vpd83,
)
self._vpd83 = _vpd83
self._location = _location
self._rpm = _rpm
self._link_type = _link_type
def location(self):
"""
String. Disk location in storage topology. New in version 1.3.
"""
if self._location == '':
raise LsmError(ErrorNumber.NO_SUPPORT,
"Disk.location property is not supported by this "
"plugin yet")
return self._location
def _recv_msg(self):
"""
Reads header first to get the length and then the remaining
bytes of the message.
"""
try:
l = self._read_all(self.HDR_LEN)
msg = self._read_all(int(l))
# common.Info("RECV: ", msg)
except socket.error as e:
raise LsmError(ErrorNumber.TRANSPORT_COMMUNICATION,
"Error while reading a message from the plug-in",
str(e))
except _SocketEOF:
raise LsmError(
ErrorNumber.TRANSPORT_COMMUNICATION,
"Error while reading a message from the plug-in, EOF")
return msg
def read_resp(self):
data = self._recv_msg()
resp = json.loads(data, cls=_DataDecoder)
if 'result' in resp:
return resp['result'], resp['id']
else:
e = resp['error']
raise LsmError(**e)
def _standardize_init_list(init_ids):
rc = []
for i in init_ids:
valid, init_type, init_id = AccessGroup.initiator_id_verify(i)
if valid:
rc.append(init_id)
else:
raise LsmError(LsmError.ErrorNumber.INVALID_ARGUMENT,
"Invalid initiator ID %s" % i)
return rc
def fw_version(self):
"""
String. Firmware version string. New in version 1.3.
On some system, it might contain multiple version strings, example:
"Package: 23.32.0-0009, FW: 3.440.05-3712"
"""
if self._fw_version == '':
raise LsmError(ErrorNumber.NO_SUPPORT,
"System.fw_version() is not supported by this "
"plugin yet")
return self._fw_version
def read_cache_pct(self):
"""
Integer. Read cache percentage. New in version 1.3.
Possible values:
* 0-100
The read cache percentage. The write cache percentage will
then be 100 - read_cache_pct
"""
if self._read_cache_pct == System.READ_CACHE_PCT_NO_SUPPORT:
raise LsmError(ErrorNumber.NO_SUPPORT,
"System.read_cache_pct is not supported by this "
"plugin yet")
return self._read_cache_pct
def vpd83(self):
"""
String. SCSI VPD83 ID. New in version 1.3.
Only available for DAS(direct attached storage) systems.
The VPD83 ID could be used in 'lsm.SCSI.disk_paths_of_vpd83()'
when physical disk is exposed to OS directly.
"""
if self._vpd83 == '':
raise LsmError(
ErrorNumber.NO_SUPPORT,
"Disk.vpd83 is not supported by current disk or plugin")
return self._vpd83
def send_req(self, method, args):
"""
Sends a request given a method and arguments.
Note: arguments must be in the form that can be automatically
serialized to json
"""
try:
msg = {'method': method, 'id': 100, 'params': args}
data = json.dumps(msg, cls=_DataEncoder)
self._send_msg(data)
except socket.error as se:
raise LsmError(ErrorNumber.TRANSPORT_COMMUNICATION,
"Error while sending a message to the plug-in",
str(se))
def get_socket(path):
"""
Returns a connected socket from the passed in path.
"""
try:
s = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
if os.path.exists(path):
if os.access(path, os.R_OK | os.W_OK):
s.connect(path)
else:
raise LsmError(
ErrorNumber.PLUGIN_SOCKET_PERMISSION,
"Permissions are incorrect for IPC "
"socket file")
else:
raise LsmError(ErrorNumber.PLUGIN_NOT_EXIST,
"Plug-in appears to not exist")
except socket.error:
# self, code, message, data=None, *args, **kwargs
raise LsmError(ErrorNumber.PLUGIN_IPC_FAIL,
"Unable to connect to lsmd, daemon started?")
return s
def rpm(self):
"""
Integer. New in version 1.3.
Disk rotation speed - revolutions per minute(RPM):
-1 (LSM_DISK_RPM_UNKNOWN):
Unknown RPM
0 (LSM_DISK_RPM_NON_ROTATING_MEDIUM):
Non-rotating medium (e.g., SSD)
1 (LSM_DISK_RPM_ROTATING_UNKNOWN_SPEED):
Rotational disk with unknown speed
>1:
Normal rotational disk (e.g., HDD)
"""
if self._rpm == Disk.RPM_NO_SUPPORT:
raise LsmError(ErrorNumber.NO_SUPPORT,
"Disk.rpm is not supported by this plugin yet")
return self._rpm
def mode(self):
"""
Integer(enumerated value). System mode. New in version 1.3.
Only available for HW RAID systems at this time.
Possible values:
* lsm.System.MODE_HARDWARE_RAID
The logical volume(aka, RAIDed virtual disk) can be exposed
to OS while hardware RAID card is handling the RAID
algorithm. Physical disk can not be exposed to OS directly.
* lsm.System.MODE_HBA
The physical disks can be exposed to OS directly.
SCSI enclosure service might be exposed to OS also.
"""
if self._mode == System.MODE_NO_SUPPORT:
raise LsmError(ErrorNumber.NO_SUPPORT,
"System.mode is not supported by this plugin yet")
return self._mode
def _wwpn_to_lsm_type(wwpn, raise_error: bool = True):
"""
Convert provided WWPN string into LSM standard one:
LSM WWPN format:
^(?:[0-9a-f]{2}:){7}[0-9a-f]{2}$
LSM WWPN Example:
10:00:00:00:c9:95:2f:de
Acceptable WWPN format is:
^[0x|0X]{0,1}(:?[0-9A-Fa-f]{2}[\.\-:]{0,1}){7}[0-9A-Fa-f]{2}$
Acceptable WWPN example:
10:00:00:00:c9:95:2f:de
10:00:00:00:C9:95:2F:DE
10-00-00-00-C9-95-2F-DE
10-00-00-00-c9-95-2f-de
10.00.00.00.C9.95.2F.DE
10.00.00.00.c9.95.2f.de
0x10000000c9952fde
0X10000000C9952FDE
10000000c9952fde
10000000C9952FDE
Return the LSM WWPN
Return None if raise_error is False and not a valid WWPN.
"""
if AccessGroup._regex_wwpn.match(str(wwpn)):
s = str(wwpn)
s = s.lower()
s = re.sub(r'0x', "", s)
s = re.sub(r'[^0-9a-f]', "", s)
s = ":".join(re.findall(r'..', s))
return s
if raise_error:
raise LsmError(
ErrorNumber.INVALID_ARGUMENT,
"Invalid WWPN Initiator: %s" % wwpn,
)
return None
