def fill_empty_vect_dict(self):
vects = []
for i in range(self.gene_count):
v = []
for j in range(3):
v_range = self.v_max_list[j] - self.v_min_list[j]
v.append(self.v_min_list[j]+ random()*v_range)
vects.append(v)
self.node_mem[self.node_id] = vects
self.write_memory_prop(vects)
def fill_empty_nums_dict(self):
nums = []
list_limits = self.get_list_limits()
n_range = list_limits[1] - list_limits[0]
for i in range(self.gene_count):
num = list_limits[0] + random()*n_range
if self.number_type == 'int':
num = int(num)
nums.append(num)
self.node_mem[self.node_id] = nums
self.write_memory_prop(nums)
def export_ter(filepath):
start_time = time.process_time()
filename = filepath + '.ter'
# start to set all the tags and values needed for the .ter file
ter_header = 'TERRAGENTERRAIN '
size_tag = 'SIZE'
size = 64
scal_tag = 'SCAL'
scalx = 30.0
scaly = 30.0
scalz = 30.0
altw_tag = 'ALTW'
HeightScale = 80
BaseHeight = 0
totalpoints = (size + 1) * (size + 1)
# set seed for noise.random()
noise.seed_set(123)
# values are packed as short (i.e = integers max 32767) so we map them in the right range
values = [
int(map_range(noise.random(), 0.0, 1.0, 0.0, 32767.0))
for i in range(totalpoints)
]
# print(values)
eof_tag = 'EOF' # end of file tag
with open(filename, "wb") as file:
# write the header
file.write(ter_header.encode('ascii'))
# write the size of the terrain
file.write(size_tag.encode('ascii'))
file.write(struct.pack('h', size))
# padding byte needed after SIZE
file.write(struct.pack('xx')) # padding -> b'\x00\x00'
# write the scale tag = SCAL
file.write(scal_tag.encode('ascii'))
# pack the scaling values as floats
file.write(struct.pack('fff', scalx, scaly, scalz))
# write the altitude ALTW tag
file.write(altw_tag.encode('ascii'))
# pack heightScale and baseHeight
file.write(struct.pack('h', HeightScale))
file.write(struct.pack('h', BaseHeight))
# pack as shorts the elvetions values
for v in values:
file.write(struct.pack('h', v))
# EOF = end of file
file.write(eof_tag.encode('ascii'))
file.close()
print('Terrain exported in %.4f sec.' % (time.process_time() - start_time))
def __init__(self, values = None, random = False):
self.values = values
self.random = random
self.q8 = []
if values:
if len(values) != 8:
print("Oops, length of values passed in is wrong. DEATH.")
sys.exit()
self.q8 = values
if random:
for i in range(0, 8):
self.q8.append(noise.random())
def SavePreset(FName):
FName = FName.replace("//", "")
try:
f = open(FName,'w')
except:
message = "unable to save file."
return
writeln(f,CurVersion)
scn = bpy.context.scene
writeln(f, scn.sldDensity)
writeln(f, scn.sldGravity)
writeln(f, scn.sldSegments)
writeln(f, scn.sldLength)
writeln(f, scn.sldWidth)
writeln(f, scn.sldInit)
writeln(f, scn.sldRand)
writeln(f, scn.sldRloc)
writeln(f, scn.sldFollow)
writeln(f, scn.sldControl)
writeln(f, scn.sldCtrlSeg)
writeln(f, scn.sldSegRand)
writeln(f, scn.sldFalloff)
if scn.chkPointed:
writeln(f, "1")
else:
writeln(f, "0")
if scn.chkVCol:
writeln(f, "1")
else:
writeln(f, "0")
if scn.chkWind:
writeln(f, "1")
else:
writeln(f, "0")
if scn.chkGuides:
writeln(f, "1")
else:
writeln(f, "0")
writeln(f,int(random()*1000))
writeln(f,1) #First Run
objects = bpy.context.selected_objects
for z in range(len(objects)):
writeln(f,objects[z].name)
f.close()
def fill_vect_mem(self):
if self.node_id in self.node_mem:
vects = self.node_mem[self.node_id]
else:
vects = []
if len(vects) < self.gene_count:
for i in range(self.gene_count -len(vects)):
v = []
for j in range(3):
v_range = self.v_max_list[j] - self.v_min_list[j]
v.append(self.v_min_list[j] + random()*v_range)
vects.append(v)
elif len(vects) > self.gene_count:
vects = vects[:self.gene_count]
self.node_mem[self.node_id] = vects
self.write_memory_prop(vects)
def fill_num_mem(self):
if self.node_id in self.node_mem:
nums = self.node_mem[self.node_id]
else:
nums = []
if len(nums) < self.gene_count:
list_limits = self.get_list_limits()
n_range = list_limits[1] - list_limits[0]
for i in range(self.gene_count -len(nums)):
num = list_limits[0] + random()*n_range
if self.number_type == 'int':
num = int(num)
nums.append(num)
elif len(nums) > self.gene_count:
nums = nums[:self.gene_count]
self.node_mem[self.node_id] = nums
self.write_memory_prop(nums)
def randnum(low=0.0, high=1.0, seed=0):
"""
randnum( low=0.0, high=1.0, seed=0 )
Create random number
Parameters:
low - lower range
(type=float)
high - higher range
(type=float)
seed - the random seed number, if seed is 0, the current time will be used instead
(type=int)
Returns:
a random number
(type=float)
"""
Noise.seed_set(seed)
rnum = Noise.random()
rnum = rnum*(high-low)
rnum = rnum+low
return rnum
def randnum(low=0.0, high=1.0, seed=0):
"""
randnum( low=0.0, high=1.0, seed=0 )
Create random number
Parameters:
low - lower range
(type=float)
high - higher range
(type=float)
seed - the random seed number, if seed is 0, the current time will be used instead
(type=int)
Returns:
a random number
(type=float)
"""
Noise.seed_set(seed)
rnum = Noise.random()
rnum = rnum * (high - low)
rnum = rnum + low
return rnum
def fill_points_colors(vectors_color, data, color_per_point, random_colors):
points_color = []
if color_per_point:
for cols, sub_data in zip(cycle(vectors_color), data):
if random_colors:
for n in sub_data:
points_color.append([random(), random(), random(), 1])
else:
for c, n in zip(cycle(cols), sub_data):
points_color.append(c)
else:
for nums, col in zip(data, cycle(vectors_color[0])):
if random_colors:
r_color = [random(),random(),random(),1]
for n in nums:
points_color.append(r_color)
else:
for n in nums:
points_color.append(col)
return points_color
def RunFiber():
#_______________________________________________________
#The main routine that is called from outside this script
#Parameters: none- loads settings from .fib file.
#_______________________________________________________
global firstrun, mat, FpF, UseWind, UseGuides, tempbm
firstrun = 1
InitNoise(seed)
print ("\n")
print ("RipSting's Fiber Generator v3 for 2.6 by Gert De Roost, running on", str(len(bpy.context.selected_objects)), "object(s)")
#____________________________________________________________
#Extract properties from the empty "Wind" if enabled
#____________________________________________________________
if UseWind == 1:
try:
Wind = bpy.data.objects.get("Wind")
Height = Wind.scale[2] / 50.0
SizeX = Wind.scale[0]
SizeY = Wind.scale[1]
DirX = Wind.location[0] / 100.0
DirY = Wind.location[1] / 100.0
Falloff = Wind.location[2] /100.0
Roughness = .5
except:
print ("Cannot find an empty named \"wind\": Not using wind engine.")
UseWind = 0
#____________________________________________________________
#Other variable declarations
#____________________________________________________________
vertexcount = 0
objnum = 0
polycenter = [0,0,0]
corner1 = [0,0,0]
corner2 = [0,0,0]
normal = [0,0,0]
direc = [0,0,0]
basevertex = [0,0,0]
vertex = [0,0,0]
vertexold = [0,0,0]
vertexno = [0,0,0]
randomdir = [0,0,0]
gravitydir = [0,0,0]
WindDir = [0,0,0,0] #First two are initial, second two are incremental
vCorner = [0,0] #Vertex color corners
vColor1 = [0,0,0]
vColor2 = [0,0,0]
aColor = [0,0,0]
vPercent = [0,0,0]
addVariables = [0,0,0]
VcolClump = 1
tempbm = bmesh.new()
frame = bpy.context.scene.frame_current
redoFpF = 0
try:
test = FpF
except:
redoFpF = 1
#____________________________________________________________
#Setup Density if not already initialized
#____________________________________________________________
if firstrun == 1 or redoFpF == 1:
print ("Storing fiber information for animation")
dens = d
seg = s
FpF = []
newbm = bmesh.new()
objects = bpy.context.selected_objects
for num in range(len(objects)):
mat = adapt(objects[num])
original = objects[num].data
bm = bmesh.new()
bm.from_mesh(original)
for f in bm.faces:
if len(f.verts) < 3: break
FpF.append(int(fncArea(f, mat) * d))
bm.free()
newbm.free()
#____________________________________________________________
fnum = -1
for num in range(len(objects)):
i=0 #set vertex count to zero
original = objects[num].data
origbm = bmesh.new()
origbm.from_mesh(original)
mat = adapt(objects[num])
meshname = original.name
if firstrun == 0:
me = bpy.data.meshes.get(meshname+"_Fiber."+str(objnum))
newbm.from_mesh(me)
else:
me = bpy.data.meshes.new(meshname+"_Fiber."+str(objnum))
#____________________________________________________________
#Test for fiber guides
#____________________________________________________________
if UseGuides == 1:
try:
Guides = bpy.data.meshes.get(meshname +"_Fiber.C")
Gbm = bmesh.new()
Gbm.from_mesh(Guides)
GuideOBJ = bpy.data.objects.get(meshname+"_Fiber.C")
GMat = adapt(GuideOBJ)
if (len(Guides.vertices)/CtrlSeg) != int(len(Guides.vertices)/CtrlSeg):
print ("Uneven number of control points non-divisible by" , CtrlSeg ,"\nPlease re-create fiber guides.")
print (len(Guides.vertices))
UseGuides = 0
except:
UseGuides = 0
#____________________________________________________________
for f in origbm.faces:
#Skip over faces with only 2 verts (Edges) v1.3
if len(f.verts) < 3: break
fnum += 1
p=0
if UseGuides == 0:
#____________________________________________________________
#find normal direction
#____________________________________________________________
normal = renormal(multmat(mat, f.verts[0]),multmat(mat, f.verts[1]),multmat(mat, f.verts[2]))
#follownormals- 1 = follow, 0 = don't follow
normal[0] *= follow
normal[1] *= follow
normal[2] = (1 - follow) + (normal[2] * follow)
#____________________________________________________________
#centerpoint coordinates
polycenter = [0,0,0]
for va in f.verts:
v = multmat(mat, va)
for z in range(3):
#z is the coordinate plane (x,y,or z)
polycenter[z] += v.co[z]
for z in range(3):
polycenter[z] /= len(f.verts)
col_lay = origbm.loops.layers.color.active
if UseVCol == 1 and col_lay != None:
# colorvalues of centerpoint
for z in range(len(f.loops)):
aColor[0] += (f.loops[z][col_lay].r) * 255
aColor[1] += (f.loops[z][col_lay].g) * 255
aColor[2] += (f.loops[z][col_lay].b) * 255
for z in range(3):
aColor[z] /= len(f.loops)
for x in range (FpF[fnum]): #loop for density in each poly
#no need to calculate things if density for face is 0
if UseVCol == 1 and col_lay != None:
if (f.loops[0][col_lay].b) * 255 + (f.loops[1][col_lay].b) * 255 + (f.loops[1][col_lay].b) * 255 == 0:
break
vertexcount += s*2 + 2
#_____________________________________________________________
#Find a point on the current face for the fiber to grow out of
#My logic behind this:
#pick a random point between the center of the poly and any corner
#pick a random point between the center and the next corner adjacent to the original
#pick a random distance between those other two random points
#This ensures that the blade will actually be on the face
#____________________________________________________________
cornernum = int(random() * len(f.verts)) #Pick a random corner
vCorner[0] = cornernum
cornernum += 1
if cornernum > len(f.verts)-1:
cornernum = 0
vCorner[1] = cornernum
#____________________________________________________________
#Find random location for new fiber on the current face
#Much simplified randomization speeds process (v1.3)
#____________________________________________________________
percent = pow(random(),.5) #optimized V1.3: replaced 14 different random() statements!!!
vPercent[0] = percent
vPercent[1] = percent
for z in range(3):
corner1[z] = (multmat(mat, f.verts[vCorner[0]]).co[z] - polycenter[z]) * percent + polycenter[z]
for z in range(3):
corner2[z] = (multmat(mat, f.verts[vCorner[1]]).co[z] - polycenter[z]) * percent + polycenter[z]
percent = random()
vPercent[2] = percent
for z in range(3):
basevertex[z] = (corner2[z] - corner1[z]) * percent + corner1[z]
vertex = basevertex
#____________________________________________________________
#Vertex color Stuff (v1.2)
#____________________________________________________________
if UseVCol == 1 and col_lay != None:
vColor1[0] = (f.loops[vCorner[0]][col_lay].r) * 255
vColor1[1] = (f.loops[vCorner[0]][col_lay].g) * 255
vColor1[2] = (f.loops[vCorner[0]][col_lay].b) * 255
vColor2[0] = (f.loops[vCorner[1]][col_lay].r) * 255
vColor2[1] = (f.loops[vCorner[1]][col_lay].g) * 255
vColor2[2] = (f.loops[vCorner[1]][col_lay].b) * 255
for z in range(2):
addVariables[z] = ((aColor[z] * (1-vPercent[0])) + (vColor1[z] * vPercent[0]))/2
addVariables[z] = (addVariables[z] * (1-vPercent[2]) + (((aColor[z] * (1-vPercent[1])) + (vColor2[z] * vPercent[1]))/2) * vPercent[2])/2
addVariables[2] = (vColor1[2] + vColor2[2])/2
else:
#Use these values if no vertex colors are present
addVariables = [63.75,63.75,255]
#Green ties into the length of the fibers
#If Using fiber guides, Green ties into clumpiness
l = l2 * ((addVariables[1]) / 2)
VcolClump = 1 #addVariables[1] / 85.0
#Red ties into the gravity effect on the fibers
grav = grav2 * ((addVariables[0]) / 5)
#Blue ties into density... x is the faces generated so far for the face... v1.3
FaceDensity = int(FpF[fnum] * addVariables[2]) -1
#print FaceDensity, x
if x >= FaceDensity:
break
#____________________________________________________________
#Wind
#____________________________________________________________
if UseWind == 1:
WindStrength = ((HTerrain([vertex[0]/SizeX+(frame*DirX), vertex[1]/SizeY+(frame*DirY), frame*Falloff], 1, 1, Height, Roughness) -(Height/2)) * Height)*pow(l,1.5)
#Find Y/X Slope that the wind is blowing at
if abs(Wind.location[0]) > abs(Wind.location[1]):
WindDir[0] = (Wind.location[1] / Wind.location[0]) * WindStrength
WindDir[1] = WindStrength
if Wind.location[1] < 0:
WindDir[1] = -WindDir[1]
else:
WindDir[0] = WindStrength
if Wind.location[1] == 0:
Wind.location[1] = .001
WindDir[1] = (Wind.location[0] / Wind.location[1]) * WindStrength
if Wind.location[0] < 0:
WindDir[0] = -WindDir[0]
if Wind.location[1] < 0:
WindDir[0] = -WindDir[0]
WindDir[2] = 0
WindDir[3] = 0
if UseGuides == 0:
#____________________________________________________________
#Normal stuff
#____________________________________________________________
for z in range(3):
vertexno[z] = normal[z] + (r * (random()-.5))
#____________________________________________________________
#Find random direction that the blade is rotated
#(So that it looks good from all angles, and isn't uniform)
#____________________________________________________________
rw= [random() -.5, random() -.5]
#Find Y/X Slope that the blade is facing
if abs(rw[0]) > abs(rw[1]):
direc[0] = (rw[1] / rw[0]) * w
direc[1] = w
if rw[1] < 0:
direc[1] = - direc[1]
else:
direc[0] = w
direc[1] = (rw[0] / rw[1]) * w
if rw[0] < 0:
direc[0] = -direc[0]
#direc[2] = rw
#____________________________________________________________
#Start the creation process!
#____________________________________________________________
i = i + 2 #increment vertex count
gravitydir = [0,0,n] #right now I only have gravity working on the Z axis
#____________________________________________________________
#If the fiber mesh already exists, simply move the verts instead
#of creating new ones. Preserves material data.
#____________________________________________________________
if firstrun == 0:
#Move base verts
for z in range(3):
#vertex[z] = me.vertices[i-2].co[z]
me.vertices[i-1].co[z] = vertex[z] + direc[z]
me.vertices[i-2].co[z] = vertex[z]
else:
#Create base verts
me.vertices.add(2)
me.vertices[-1].co = (vertex[0], vertex[1], vertex[2])
me.vertices[-2].co = (vertex[0] + direc[0], vertex[1] + direc[1], vertex[2] + direc[2])
if UseGuides == 0:
#____________________________________________________________
#Normal creation routine with gravity, randomdir, etc.
#____________________________________________________________
for y in range (s):
for z in range(3):
randomdir[z] = (random()-.5) * rl
vertexold[z] = vertex[z]
WindDir[2] += WindDir[0]
WindDir[3] += WindDir[1]
gravitydir[2] += grav
vertex[0] += (vertexno[0]) * l - gravitydir[0] + WindDir[2] + randomdir[0]
vertex[1] += (vertexno[1]) * l - gravitydir[1] + WindDir[3] + randomdir[1]
vertex[2] += (vertexno[2]) * l - gravitydir[2] + randomdir[2]
#____________________________________________________________
#Fix segment length issues with gravity
#____________________________________________________________
distance = pow(pow(vertexold[0] - vertex[0],2)+pow(vertexold[1] - vertex[1],2)+pow(vertexold[2] - vertex[2],2),.5)
divide = (distance/(l +.001))
#for z in range(3):
vertex[0] = (vertex[0]-vertexold[0]) / divide + vertexold[0]
vertex[1] = (vertex[1]-vertexold[1]) / divide + vertexold[1]
vertex[2] = (vertex[2]-vertexold[2]) / divide + vertexold[2]
#____________________________________________________________
already = 0
if pointed == 1 and y == s-1:
i += 1 #increment vertex count
if firstrun == 0:
#Move base verts
me.vertices[i-1].co[0] = vertex[0]+direc[0]/2
me.vertices[i-1].co[1] = vertex[1]+direc[1]/2
me.vertices[i-1].co[2] = vertex[2]+direc[2]/2
else:
#Create base verts
me.vertices.add(1)
me.vertices[-1].co = (vertex[0]+direc[0]/2,vertex[1]+direc[1]/2,vertex[2]+direc[2]/2)
else:
i += 2 #increment vertex count
if firstrun == 0:
#Move base verts
me.vertices[i-2].co[0] = vertex[0]
me.vertices[i-2].co[1] = vertex[1]
me.vertices[i-2].co[2] = vertex[2]
me.vertices[i-1].co[0] = vertex[0]+direc[0]
me.vertices[i-1].co[1] = vertex[1]+direc[1]
me.vertices[i-1].co[2] = vertex[2]+direc[2]
else:
#Create base verts
me.vertices.add(2)
me.vertices[-1].co = (vertex[0],vertex[1],vertex[2]+randomdir[2])
me.vertices[-2].co = (vertex[0]+direc[0],vertex[1]+direc[1],vertex[2]+direc[2])
already = 1
me.tessfaces.add(1)
face = me.tessfaces[-1]
face.vertices_raw = (i-4, i-2, i-1, i-3)
if firstrun == 1:
if not(already):
me.tessfaces.add(1)
face = me.tessfaces[-1]
face.vertices = (i-2, i-1, i-3)
uv_lay = me.tessface_uv_textures.active
if uv_lay == None:
uv_lay = me.tessface_uv_textures.new()
if uv_lay != None:
uv_lay.data[face.index].uv1 = (0,float(y)/s)
if pointed == 1 and y == s-1:
uv_lay.data[face.index].uv2 = (.5,1)
uv_lay.data[face.index].uv3 = (1,float(y)/s)
else:
uv_lay.data[face.index].uv2 = (0,float(y)/s + (1.0/s))
uv_lay.data[face.index].uv3 = (1,float(y)/s + (1.0/s))
uv_lay.data[face.index].uv4 = (1,float(y)/s)
else:
#____________________________________________________________
#Use Guides instead of gravity, segment length, etc. (check)
#____________________________________________________________
Guide = []
Guide1 = []
Guide2 = []
GuideOBJ = bpy.data.objects.get(original.name+"_Fiber.C")
GMat = GuideOBJ.matrix_world
gv = Gbm.verts
#____________________________________________________________
#Find Closest two fiber guides and store them in c[] (check)
#____________________________________________________________
c = [0,CtrlSeg]
if fncdistance(multmat(GMat, gv[c[1]]).co, basevertex) < fncdistance(multmat(GMat,gv[c[0]]).co, basevertex):
#Swap
temp = c[1]
c[1] = c[0]
c[0] = temp
for y in range(CtrlSeg*2,len(gv),CtrlSeg):
if fncdistance(multmat(GMat,gv[y]).co,basevertex) < fncdistance(multmat(GMat,gv[c[0]]).co,basevertex):
c[1] = c[0]
c[0] = y
elif fncdistance(multmat(GMat,gv[y]).co,basevertex) < fncdistance(multmat(GMat,gv[c[1]]).co,basevertex):
c[1] = y
#____________________________________________________________
#Get the coordinates of the guides' control points (check)
#____________________________________________________________
Guide0 = []
for y in range(CtrlSeg):
Guide1.append ([multmat(GMat,gv[c[0]+y]).co[0],multmat(GMat,gv[c[0]+y]).co[1],multmat(GMat,gv[c[0]+y]).co[2]])
Guide2.append ([multmat(GMat,gv[c[1]+y]).co[0],multmat(GMat,gv[c[1]+y]).co[1],multmat(GMat,gv[c[1]+y]).co[2]])
for y in range(len(Guide1)):
Guide0.append([0,0,0])
for z in range(3):
Guide0[y][z] = Guide1[y][z]
for y in range(1,CtrlSeg):
for z in range(3):
Guide1[y][z] -= Guide1[0][z]
Guide2[y][z] -= Guide2[0][z]
#____________________________________________________________
#Determine weight of the two fiber guides () (check)
#____________________________________________________________
weight = fncFindWeight(gv[c[0]].co,gv[c[1]].co,vertex)
#____________________________________________________________
#Find single, weighted, control fiber (check)
#____________________________________________________________
Guide.append ([0,0,0])
for y in range(1,CtrlSeg):
Guide.append (fncFindWeightedVert(Guide1[y],Guide2[y],weight))
Flen = SegRnd * random()
#print Guide
#____________________________________________________________
#Create the Fiber
#____________________________________________________________
for y in range(1,s):
#____________________________________________________________
#Impliment Wind
#____________________________________________________________
WindDir[2] += WindDir[0]
WindDir[3] += WindDir[1]
for z in range(3):
randomdir[z] = (random()-.5) * rl
#____________________________________________________________
#Use Bezier interpolation
#____________________________________________________________
if CtrlSeg == 3:
v = Bezier3(Guide[0],Guide[1],Guide[2],float(y)/s * (1-Flen))
elif CtrlSeg == 4:
v = Bezier4(Guide[0],Guide[1],Guide[2],Guide[3],float(y)/s * (1-Flen))
else:
v = Bezier(Guide,float(y)/s * (1-Flen))
vertex = [v[0]+basevertex[0],v[1]+basevertex[1],v[2]+basevertex[2]]
#____________________________________________________________
#Clumping
#____________________________________________________________
if follow != 0:
for z in range(1,len(Guide1)):
Guide1[z] += Guide0
weight = pow(1-((float(y)/s) * (follow * VcolClump)),Ff) #Ff = Clumpiness Falloff
if CtrlSeg == 3:
v = Bezier3(Guide0[0],Guide0[1],Guide0[2],float(y)/s * (1-Flen)) #Flen = random fiber length
elif CtrlSeg == 4:
v = Bezier4(Guide0[0],Guide0[1],Guide0[2],Guide0[3],float(y)/s * (1-Flen))
else:
v = Bezier(Guide0,float(y)/s * (1-Flen))
vertex = fncFindWeightedVert(v, vertex, weight)
#____________________________________________________________
#Create Verts & Faces
#____________________________________________________________
vertex = [vertex[0]+randomdir[0]+WindDir[2],vertex[1]+randomdir[1]+WindDir[3], vertex[2] + randomdir[2]]
already = 0
if y == s-1 and pointed == 1:
i += 1
if firstrun == 1:
me.vertices.add(1)
me.vertices[-1].co = (vertex[0] + direc[0]/2, vertex[1] + direc[1]/2, vertex[2] + direc[2]/2)
else:
me.vertices[i-1].co[0] = vertex[0]+direc[0]/2
me.vertices[i-1].co[1] = vertex[1]+direc[1]/2
me.vertices[i-1].co[2] = vertex[2]+direc[2]/2
else:
i +=2
if firstrun == 1:
me.vertices.add(2)
me.vertices[-1].co = (vertex[0], vertex[1], vertex[2])
me.vertices[-2].co = (vertex[0]+direc[0], vertex[1]+direc[1], vertex[2]+direc[2])
already = 1
me.tessfaces.add(1)
face = me.tessfaces[-1]
face.vertices_raw = (i-4, i-2, i-1, i-3)
else:
#Move base verts
me.vertices[i-2].co[0] = vertex[0]
me.vertices[i-2].co[1] = vertex[1]
me.vertices[i-2].co[2] = vertex[2]
me.vertices[i-1].co[0] = vertex[0]+direc[0]
me.vertices[i-1].co[1] = vertex[1]+direc[1]
me.vertices[i-1].co[2] = vertex[2]+direc[2]
if firstrun == 1:
if not(already):
me.tessfaces.add(1)
face = me.tessfaces[-1]
face.vertices = (i-2, i-1, i-3)
uv_lay = me.tessface_uv_textures.active
if uv_lay == None:
uv_lay = me.tessface_uv_textures.new()
if uv_lay != None:
uv_lay.data[face.index].uv1 = (0,float(y)/s)
if pointed == 1 and y == s-1:
uv_lay.data[face.index].uv2 = (.5,1)
uv_lay.data[face.index].uv3 = (1,float(y)/s)
else:
uv_lay.data[face.index].uv2 = (0,float(y)/s + (1.0/s))
uv_lay.data[face.index].uv3 = (1,float(y)/s + (1.0/s))
uv_lay.data[face.index].uv4 = (1,float(y)/s)
me.validate()
me.update(calc_edges=True, calc_tessface=True)
obj = bpy.data.objects.new(name=meshname+"_Fiber."+str(objnum), object_data=me)
obj.location = objects[num].location
scene = bpy.context.scene
scene.objects.link(obj)
vertexcount = 0
def set_random_seed(scene):
if scene.cycles_random_seed:
bpy.context.scene.cycles.seed = noise.random() * 10000
print("New cycles seed", bpy.context.scene.cycles.seed)
