def rebuildFromIsoparms(surface,spansU=0,spansV=0,degree=3,keepHistory=False):
'''
Build a new nurbs surface from an existing surfaces isoparms
@param surface: Surface to build from
@type surface: str
@param direction: Surface direction to build from
@type direction: str
@param degree: Degree to build new surface to
@type degree: int
@param keepHistory: Keep loft surface history
@type keepHistory: bool
'''
# Check surface
if not mc.objExists(surface):
raise Exception('Surface "'+surface+'" does not exist!!')
if not isSurface(surface):
raise Exception('Object "'+surface+'" is not a valid nurbs surface!!')
# Initialize function pointers
uMinPtr = OpenMaya.MScriptUtil().asDoublePtr()
uMaxPtr = OpenMaya.MScriptUtil().asDoublePtr()
vMinPtr = OpenMaya.MScriptUtil().asDoublePtr()
vMaxPtr = OpenMaya.MScriptUtil().asDoublePtr()
# Get surface details
surfFn = getSurfaceFn(surface)
surfFn.getKnotDomain(uMinPtr,uMaxPtr,vMinPtr,vMaxPtr)
uMin = OpenMaya.MScriptUtil(uMinPtr).asDouble()
uMax = OpenMaya.MScriptUtil(uMaxPtr).asDouble()
vMin = OpenMaya.MScriptUtil(vMinPtr).asDouble()
vMax = OpenMaya.MScriptUtil(vMaxPtr).asDouble()
uDif = uMax - uMin
vDif = vMax - vMin
# Get surface form
closeU = bool(mc.getAttr(surface+'.formU'))
closeV = bool(mc.getAttr(surface+'.formV'))
# Check spans
if not spansU: spansU = surfFn.numKnotsInU()
if not spansV: spansV = surfFn.numKnotsInV()
# Get new knot values
uList = []
vList = []
uInc = uDif/(spansU-int(not closeU))
vInc = vDif/(spansV-int(not closeV))
for u in range(spansU): uList.append(uMin+(uInc*u))
for v in range(spansV): vList.append(vMin+(vInc*v))
# Rebuild in U
uLoft = mc.loft([surface+'.u['+str(i)+']' for i in uList],close=closeU,degree=degree)
uSurface = uLoft[0]
# Rebuld in V
vLoft = mc.loft([uSurface+'.v['+str(i)+']' for i in vList],close=closeV,degree=degree)
rebuildSurface = vLoft[0]
# Return result
return rebuildSurface
def axisPanelCreate(self , planeName , cur , axis):
CurveEps = mc.ls(cur + '.ep[:]',fl = True)
CurveCvs = mc.ls(cur + '.cv[:]',fl = True)
cvworlds = []
if axis == 'auto':
for i in range(len(CurveCvs)):
cv = CurveCvs[i]
cvworld = mc.xform(cv,q = True,ws = True,t = True)
cvworlds.append(cvworld)
axisFacet = mc.polyCreateFacet(p = cvworlds,ch = False,name = planeName + '_axis_Facet')[0]
else:
curOffsetGrp = mc.group(em = True,name = planeName + '_axisPanelOffset')
curOffsetZero = mc.group(curOffsetGrp,name = curOffsetGrp + '_zero')
axisCurve01 = mc.duplicate(cur)[0]
axisCurve02 = mc.duplicate(cur)[0]
mc.parent(axisCurve01,curOffsetGrp)
mc.setAttr(curOffsetGrp + '.t' + axis,1)
mc.parent(axisCurve01,w = True)
mc.parent(axisCurve02,curOffsetGrp)
mc.setAttr(curOffsetGrp + '.t' + axis,0)
mc.parent(axisCurve02,w = True)
axisFacet = mc.loft(axisCurve01,axisCurve02,ch = 1,u = 1,c = 0,ar = 1,d = 3,ss = 1,rn = 0,po = 1,rsn = True,name = planeName + '_axis_Facet')[0]
mc.select(axisFacet)
mc.DeleteHistory()
mc.setAttr(curOffsetGrp + '.t' + axis,1)
mc.delete(curOffsetZero,axisCurve01,axisCurve02)
return axisFacet
def buildNurbsRibbon(self): if self.guideSpline: guideDeg = cmds.getAttr(self.guideSpline + '.degree' ) guideSpan = cmds.getAttr(self.guideSpline + '.spans' ) oneCurvePoints = [] otherCurvePoints = [] for i in xrange(guideDeg + guideSpan): cvPos = cmds.pointPosition(self.guideSpline + '.cv[' + str(i) + "]", w=True ) newPara = cmds.closestPointOnCurve(self.guideSpline, ip=cvPos, paramU=True) #Find the parameter Value newParaVal = cmds.getAttr(newPara + ".paramU") cmds.delete(newPara) infoNode = cmds.pointOnCurve(self.guideSpline, ch=True, pr=newParaVal) #Now find the Position and tangent! posy = (cmds.getAttr(infoNode + ".position"))[0] # returns the position posy = MVector(posy[0],posy[1],posy[2]) normy = (cmds.getAttr(infoNode + ".tangent"))[0] normy = MVector(normy[0],normy[1],normy[2]) #Use MVector from maya.openMaya normy = normy.normal() vertVect = MVector(0,1,0) sideMove = normy^vertVect #This is the notation for a cross product. Pretty cool. Should be a normal movement sideMove = sideMove.normal() * 0.5 sideMovePos = posy + sideMove otherSideMovePos = posy - sideMove oneCurvePoints.append([sideMovePos[0],sideMovePos[1],sideMovePos[2]]) otherCurvePoints.append([otherSideMovePos[0],otherSideMovePos[1],otherSideMovePos[2]]) oneSideCurve = cmds.curve(editPoint = oneCurvePoints, degree=3) OtherSideCurve = cmds.curve(editPoint = otherCurvePoints, degree=3) self.tempConstructionParts.append(oneSideCurve) self.tempConstructionParts.append(OtherSideCurve) #Now we loft the surface between the two Curves! nameStart = nameBase(self.totalMarkerList[0].getName(), self.searchString, "loc", "nbs") nameStart += "ribbonSurface" self.guideNurbsRibbon = cmds.loft(oneSideCurve, OtherSideCurve, name = nameStart, constructionHistory = True, uniform = True, close = False, autoReverse = True, degree = 3, sectionSpans = 1, range = False, polygon = 0, reverseSurfaceNormals = True) self.guideNurbsRibbon = self.guideNurbsRibbon[0] self.ribbonParts.append(self.guideNurbsRibbon)
def makePipe(circle, pipeCurve): pipeSweep = sweepPipe(circle, pipeCurve) nurbsPipe = cmds.loft(pipeSweep, degree=1, reverseSurfaceNormals=True) polyPipe = cmds.nurbsToPoly(nurbsPipe[0], name="fastPipe", format=3, matchNormalDir=True, polygonType=1) cmds.polyMergeVertex(polyPipe[0], d=0.1, alwaysMergeTwoVertices=True) cmds.delete(pipeSweep[0], nurbsPipe[0], circle[0], pipeCurve[0]) cmds.select(polyPipe)
def surfaceFromNodes(nodes, name='jntsSrf', upAxis=0, doubleEndPoints=False):
"""
Create a 2-degree nurbs surface from the position of a list of
node (generally, the IK controls)
@param nodes: controls that will dictate the CV positions
@type nodes: list of strings
@param name: the name of the surface
@type name: str
@param upAxis: the direction of the width of the surface
@type upAxis: int representing x(0), y(1) or z(2)
"""
inPos = [0,0,0]
outPos = [0,0,0]
inPos[upAxis] = -1
outPos[upAxis] = 1
crv1 = curveFromNodes(nodes, doubleEndPoints=doubleEndPoints)
crv2 = curveFromNodes(nodes, doubleEndPoints=doubleEndPoints)
MC.xform(crv1, t=outPos)
MC.xform(crv2, t=inPos)
srf = MC.loft(crv1, crv2, u=1, c=0, ch=0, ar=1, d=1, ss=1, rn=0, po=0, rsn=True)[0]
srf = MC.rename(srf, name)
MC.delete(crv1, crv2)
return srf
def draw(self):
circle1 = cmds.circle( nr=(1, 0, 0), c=(0, 0, 0), sw=self.sweep, r=self.start_radius )
circle2 = cmds.circle( nr=(1, 0, 0), c=(0, 0, 0), sw=self.sweep, r=self.end_radius )
l1 = cmds.loft(circle1, circle2)
# curves
crv = cmds.curve(p=[(0, self.start_radius, 0), (0, self.end_radius, 0)], degree=1)
crv2 = cmds.duplicate(crv)
cmds.rotate(str(self.sweep) + 'deg', 0, 0, r=True)
extrusions = []
for e in [circle1, circle2, crv, crv2]:
extrusions.append(cmds.extrude(e, et=0, d=(1,0,0), l=self.height))
cmds.delete(e)
pieces = extrusions + [l1]
group = cmds.group(*[e[0] for e in pieces])
cmds.move(0,0,0, group+".scalePivot",group+".rotatePivot", absolute=True)
cmds.setKeyframe(group, attribute='rotateX', t='0sec', value=self.rotation)
return (pieces, group)
def extendPoly(*args):
"""does the polyextension by grabbing the curve, offsetting it and then lofting. Then converts the nurbs surface to polys"""
#make sure a curve is selected
selection = cmds.ls(sl=True)
if selection:
sel = selection[0]
shape = cmds.listRelatives(sel, s=True)[0]
type = cmds.objectType(shape)
name = cmds.textFieldGrp("name", q=True, tx=True)
hisGrp = cmds.checkBox("history", q=True, v=True)
hisPoly = cmds.checkBox("polyHistory", q=True, v=True)
if type== "nurbsCurve":
#offset the curb
distance = cmds.floatFieldGrp("curbFFG", q=True, v1=True)
# bump = cmds.checkBox("bumpCB", q=True, v=True)
pos = cmds.checkBox("curbCB", q=True, v=True)
if pos == 0:
dist = distance * -1
else:
dist = distance
U = cmds.intFieldGrp("UDivIFG", q=True, v1=True)
V = cmds.intFieldGrp("VDivIFG", q=True, v1=True)
origCrv = cmds.rename(sel, "%s_inner_CRV"%name)
outCurve = cmds.offsetCurve(origCrv, d=dist, n="%s_outer_CRV"%name)
midCurve = cmds.offsetCurve(origCrv, d=dist/2, n="%s_mid_CRV"%name)
# if bump:
# cmds.xform(midCurve, ws=True, r=True, t=(0,5,0))
cmds.select(cl=True)
lofted = cmds.loft(origCrv, midCurve, outCurve)[0]
loft = cmds.rename(lofted, "%s_lofted"%name)
polygon = cmds.nurbsToPoly(loft, pt=1, ch=hisPoly, f=2, un=U, vn=V)[0]
poly = cmds.rename(polygon, "%s_poly"%name)
curbGrp = cmds.group(empty=True)
grp = cmds.rename(curbGrp, "%s_History_GRP"%name)
# cmds.rename(poly, "polyCurb")
cmds.parent(loft, outCurve, midCurve, origCrv, grp)
cmds.setAttr("%s.v"%grp, 0)
if not hisGrp:
cmds.delete(grp)
else:
cmds.warning("That's not a curve! You need to select a curve!")
else:
cmds.warning("You haven't selected anything!")
def loftFacePart(self, facePart):
"""
making poligon map
"""
crvSel = cmds.ls(os=1, fl=1, type = 'transform')
loft_suf = cmds.loft(crvSel, n = facePart + 'Tip_map', ch =1, u=1, c=0, ar= 1, d=1, ss= 1, rn= 0, po= 1, rsn = 1)
suf_inputs = cmds.listHistory( loft_suf[0])
tessel = [x for x in suf_inputs if cmds.nodeType(x) == 'nurbsTessellate']
cmds.setAttr(tessel[0]+".format", 3)
cmds.delete(loft_suf[0], ch =1)
wide_suf = cmds.duplicate(loft_suf[0], n = facePart + 'Wide_map')
def _createNurbs(self):
"""Create the nurbs curves that will act as our bendy/twist curves."""
for crv in [["hip", "knee"], ["knee", "foot"]]:
limb_points = self._getCurvePositions(crv[0], crv[1])
limb_crv = mc.curve(n=self.guides[crv[0]][0].replace("guide", "crv"), p=limb_points, d=3)
limb_crv_offset = mc.offsetCurve(limb_crv, d=.3, ugn=0)
limb_crv_inv = mc.offsetCurve(limb_crv, d=-.3, ugn=0)
limb_loft = mc.loft(limb_crv_inv, limb_crv_offset, n=self.guides[crv[0]][0].replace("guide", "nrb"), ch=0)
mc.delete(limb_crv, limb_crv_offset, limb_crv_inv)
self.nurbs[crv[0]] = limb_loft[0]
mc.parent(limb_loft, self.mod_dict["noTransform"])
def rebuildFromExistingIsoparms(surface, direction='u', degree=3, close=False, keepHistory=False):
"""
Build a new nurbs surface from an existing surfaces isoparms
@param surface: Surface to build from
@type surface: str
@param direction: Surface direction to build from
@type direction: str
@param degree: Degree to build new surface to
@type degree: int
@param close: Close lofted surface
@type close: bool
@param keepHistory: Keep loft surface history
@type keepHistory: bool
"""
# Check surface
if not cmds.objExists(surface):
raise Exception('Surface "' + surface + '" does not exist!!')
if not isSurface(surface):
raise Exception('Object "' + surface + '" is not a valid nurbs surface!!')
# Check direction
direction = direction.lower()
if not direction == 'u' and not direction == 'v':
raise Exception('Invalid surface direction! Accepted values are "u" and "v"!')
# Get surface details
surfFn = getSurfaceFn(surface)
spans = cmds.getAttr(surface + '.spans' + direction.upper())
degree = cmds.getAttr(surface + '.degree' + direction.upper())
form = cmds.getAttr(surface + '.form' + direction.upper())
knots = OpenMaya.MDoubleArray()
if direction == 'u': surfFn.getKnotsInU(knots)
if direction == 'v': surfFn.getKnotsInV(knots)
# Build iso list for surface rebuild
if degree > 1: knots = knots[(degree - 1):-(degree - 1)]
isoList = [surface + '.' + direction + '[' + str(i) + ']' for i in knots]
if not close and form:
# isoList.append(isoList[0])
isoList[-1] = isoList[-1] - 0.0001
# Loft new rebuild surface
rebuild = cmds.loft(isoList, ch=keepHistory, u=True, c=close, ar=False, d=degree, ss=1, rn=False, po=False,
rsn=(direction == 'v'))
rebuild = cmds.rename(rebuild[0], surface + '_rebuild')
# Return result
return rebuild
def create_plane(self , planeName , CvNumOfSpans , cur):
selCurve = mc.rebuildCurve(cur,ch=1,rpo=0,rt=0,end=1,kr=0,kcp=0,kep=0,kt=0,s=CvNumOfSpans,d=3,tol=0.01)[0]
mc.select(selCurve)
mc.DeleteHistory()
CurveEps = mc.ls(selCurve + '.ep[:]',fl = True)
worlds = []
txs = []
tys = []
tzs = []
jnts = []
for ep in CurveEps:
world = mc.xform(ep,q = True,ws = True,t = True)
mc.select(cl = True)
jnt = mc.joint(p = world)
worlds.append(world)
tx = ('%.3f'%world[0])
ty = ('%.3f'%world[0])
tz = ('%.3f'% world[0])
jnts.append(jnt)
#print txs,tys,tzs
mc.select(cl = True)
axisLocateJnt = mc.joint(name = planeName + 'axisLocateJnt')
#mc.group()
mc.delete(mc.parentConstraint(jnts,axisLocateJnt,mo = False))
Facet = mc.polyCreateFacet(p = worlds,ch = False)[0]
FacetShape = mc.listRelatives(Facet,s = True)[0]
UV = self.closestPointOnModel(FacetShape,axisLocateJnt)
U = UV[0]
V = UV[1]
follic = self.follicCreate(FacetShape,planeName,U,V)
offsetGrp = mc.group(em = True,name = planeName + '_cv_offset')
offsetZero = mc.group(offsetGrp,name = offsetGrp + '_zero')
mc.delete(mc.parentConstraint(follic,offsetZero,mo = False))
Curve01 = mc.duplicate(selCurve)[0]
Curve02 = mc.duplicate(selCurve)[0]
mc.parent(Curve01,offsetGrp)
mc.setAttr(offsetGrp + '.tz',1)
mc.parent(Curve01,w = True)
mc.parent(Curve02,offsetGrp)
mc.setAttr(offsetGrp + '.tz',0)
mc.parent(Curve02,w = True)
mc.delete(jnts,axisLocateJnt,Facet,follic,offsetZero)
Plane = mc.loft(Curve01,Curve02,ch = True,u = True,c = False,ar = True,d = 3,ss = True,rn = False,po = False,rsn = True,name = planeName)
mc.select(Plane)
mc.DeleteHistory()
mc.delete(selCurve,Curve01,Curve02)
return Plane
def create_loft(jts,name='loftedSurface'):
"""
Create skins a surface along a series of profile curves.
"""
pts=[cmds.xform(j,q=True,ws=True,t=True) for j in jts]
cuR = cmds.curve( p=pts)
cmds.move(0,0,.5,cuR,ls=True)
cuL = cmds.duplicate(cuR)
cmds.move(0,0,-.5,cuL,ls=True)
Nurbs=cmds.loft( cuR, cuL, ch=False, rn=True, n='%s#' %name)[0]
cmds.setAttr('%s.template' %Nurbs, 1)
sc_cl=cmds.skinCluster(jts[0],Nurbs,mi=1,sm=1)[0]
#delete bindpose
bind=cmds.listConnections('%s.bindPose' %sc_cl,c=0,d=1,p=0)
if bind:cmds.delete(bind)
cmds.delete(cuR,cuL)
return Nurbs
def tubeFromCurve(curve,spans=6,radius=1,upVector=(0,1,0),prefix=''):
'''
Project a tubular surface from the specified path curve to the target geometry.
@param curve: Path curve used to build the tube surface
@type curve: str
@param spans: Number of radial spans around the surface
@type spans: int
@param radius: Circular radius of the tube surface
@type radius: float
@param upVector: Up vector used to calculate the radial orientation of the tube surface
@type upVector: tuple
@param prefix: Name prefix for all created nodes
@type prefix: str
'''
# Check curve
if not isCurve(curve):
raise Exception('Object "'+curve+'" is not a valid nurbs curve!!')
# Check prefix
if not prefix: prefix = glTools.utils.stringUtils.stripSuffix(curve)
# Get curve info
crvMin = mc.getAttr(curve+'.minValue')
crvMax = mc.getAttr(curve+'.maxValue')
crvSpan = mc.getAttr(curve+'.spans')
crvInc = (crvMax - crvMin) / (crvSpan + 1)
# Increment over curve edit points
crvList = []
crvGrpList = []
for i in range(crvSpan + 2):
strInd = glTools.utils.stringUtils.stringIndex(i+1,2)
crvPrefix = prefix+'crv'+strInd
crvCirc = mc.circle(r=radius,s=spans,degree=3,n=crvPrefix+'_curve')
crvGrp = mc.group(crvCirc[0],n=crvPrefix+'_group')
snapToCurve(curve,crvGrp,(crvInc*i),False,False)
orientToCurve(curve,crvGrp,(crvInc*i),False,upVector,'z','y')
crvList.append(crvCirc[0])
crvGrpList.append(crvGrp)
# Loft surface between curves
surface = mc.loft(crvList,ch=1,u=1,c=0,ar=1,d=3,ss=1,rn=0,po=0,rsn=True,n=prefix+'_surface')[0]
# Return result
return[surface,crvList,crvGrpList]
def doCreate(*args):
sl = api2.MGlobal.getActiveSelectionList()
if sl.length() == 0L:
return
dag,obj = sl.getComponent(0)
sic = api2.MFnSingleIndexedComponent(obj)
ids = sic.getElements()
faceIter = api2.MItMeshPolygon(dag)
srfs = []
fullPath = dag.fullPathName()
for i in xrange(len(ids)):
faceIter.setIndex(ids[i])
intArray = faceIter.getEdges()
patch = cmds.loft('%s.e[%d]' %(fullPath,intArray[2]),'%s.e[%d]' %(fullPath,intArray[0]),d=1,ch=False)
cmds.rebuildSurface(patch,ch=False,rpo=1,rt=0,end=1,kr=0,kcp=1,kc=0,su=0,du=1,sv=0,dv=1,fr=0,dir=2)
srfs.append(patch[0])
cmds.select(srfs)
return 0
def buildRibbonSurface(locators,name = '',close = False,vector = [1,0,0],width = 10):
lineCrvs = []
for locator in locators:
pos = cmds.xform(locator,q = True,ws = True,rp = True)
posVector = om.MVector(pos[0],pos[1],pos[2])
inverseWidth = width * -1
translateVectorForward = om.MVector(vector[0] * width,vector[1] * width,vector[2] * width)
translateVectorBackward = om.MVector((vector[0] * inverseWidth),(vector[1] * inverseWidth),(vector[2] * inverseWidth))
startTransformationMatrix = om.MTransformationMatrix()
startTransformationMatrix.setTranslation(posVector,om.MSpace.kWorld)
startTransformationMatrix.addTranslation(translateVectorForward,om.MSpace.kObject)
startPosVector = startTransformationMatrix.getTranslation(om.MSpace.kWorld)
endTransformationMatrix = om.MTransformationMatrix()
endTransformationMatrix.setTranslation(posVector,om.MSpace.kWorld)
endTransformationMatrix.addTranslation(translateVectorBackward,om.MSpace.kObject)
endPosVector = endTransformationMatrix.getTranslation(om.MSpace.kWorld)
startPos = [startPosVector.x,startPosVector.y,startPosVector.z]
endPos = [endPosVector.x,endPosVector.y,endPosVector.z]
lineCrv = cmds.curve(d = 1,p = (startPos,endPos))
lineCrvs.append(lineCrv)
ribbonOrig = cmds.loft(lineCrvs,ch = 1,u = 1,c = close,ar = 1,d = 3,ss = 1,rn = 0 ,po = 0, rsn = True,n = '%s_Surface'%name)
ribbonRebuild = cmds.rebuildSurface(ribbonOrig[0],ch = 1,rpo = 1,rt = 0,end = 1,kr = 0,kcp = 1,kc = 0,su = 8,du = 1,sv = 2,dv = 3,tol = 0.01,fr = 0, dir = 2)
ribbon = []
shape = cmds.listRelatives(ribbonRebuild[0], type = 'shape')[0]
ribbon.append(ribbonRebuild[0])
ribbon.append(shape)
cmds.delete(ribbonOrig[0],ch = True)
cmds.delete(lineCrvs)
return ribbon
def j_MakeSecondContrl():
j_sndcontrls = [];
j_surface = []
j_edges = mc.ls(os=1,fl=1);
#loft -ch 1 -u 1 -c 0 -ar 1 -d 3 -ss 1 -rn 0 -po 0 -rsn true "MOBBodyAA.e[6450]" "MOBBodyAA.e[7030]";
for i in (range(1,len(j_edges),2)):
j_sndcontrls = mc.loft(j_edges[i-1],j_edges[i],ch=1,rn =0,ar =1,)
j_surface.append(j_sndcontrls[0])
mc.select(cl=1)
j_grp = 'grp_loftSurface01';
if not mc.objExists(j_grp):
mc.group(n= "grp_loftSurface01",empty =1)
mc.parent(j_surface,j_grp,);
for j in j_surface:
j_pnd = pm.pointOnSurface(j,ch=1,u=0.5, v = 0.1, top =1,)
j_position = pm.getAttr(j_pnd + ".position")
j_loc = mc.spaceLocator( p = (j_position[0], j_position[1] , j_position[2]))
j_circle = pm.circle(ch = 0)
j_pnt = pm.group(em = 1 , )
pm.parentConstraint()
return j_surface;
def __init__(self):
xPos= 10
#joints
loftCircles = self.limbCircles
limbJoints = self.limbJoints
loftBone = self.limbLoftBones
for i in range(0,2,1):
limbJnt = cmds.sphere(n='joint_'+str(i))
limbJoints.append(limbJnt[0])
cmds.move(i*xPos,0,0,limbJnt)
circleJnt = cmds.circle(n='circlelJnt_' + str(i),radius=0.4)
cmds.move(i*xPos,0,0,circleJnt)
cmds.rotate(0,-90,0,circleJnt)
loftCircles.append(circleJnt[0])
cmds.parent(circleJnt[0],limbJnt[0])
loftBone = cmds.loft(loftCircles[0],loftCircles[1],n='loftBone')
cmds.setAttr(loftBone[0] + '.inheritsTransform',0)
cmds.aimConstraint(limbJoints[1],loftCircles[0],mo=True)
cmds.aimConstraint(limbJoints[0],loftCircles[1],mo=True)
cmds.group(limbJoints[0],limbJoints[1],loftBone[0],n='limb')
def projectToSurface(surface,targetSurface,direction='u',keepOriginal=False,prefix=''):
'''
Project the edit points of the specified nurbs surface to another nurbs or polygon object
@param surface: Surface to project
@type surface: str
@param targetSurface: Surface to project onto
@type targetSurface: str
@param direction: Surface direction to extract isoparm curves from
@type direction: str
@param keepOriginal: Create new surface or replace original
@type keepOriginal: bool
@param prefix: Name prefix for all created nodes
@type prefix: str
'''
# Check surface
if not mc.objExists(surface):
raise UserInputError('Surface "'+surface+'" does not exist!!')
if not isSurface(surface):
raise UserInputError('Object "'+surface+'" is not a valid nurbs surface!!')
# Check target surface
if not mc.objExists(targetSurface):
raise UserInputError('Target surface "'+targetSurface+'" does not exist!!')
# Check prefix
if not prefix: prefix = glTools.utils.stringUtils.stripSuffix(surface)
# Check direction
direction = direction.upper()
if (direction != 'U') and (direction != 'V'):
raise UserInputError('Invalid surface direction specified! Must specify either "u" or "v"!!')
# Get surface information
spans = mc.getAttr(surface+'.spans'+direction)
minVal = mc.getAttr(surface+'.minValue'+direction)
maxVal = mc.getAttr(surface+'.maxValue'+direction)
# Create main surface group
mainGrp = mc.createNode('transform',n=prefix+'_grp')
# Extract curves
curveList = []
curveGrpList = []
curveLocList = []
geomConstraintList = []
spanInc = (maxVal - minVal)/spans
for i in range(spans+1):
# Curve prefix
strInd = glTools.utils.stringUtils.stringIndex(i,2)
crvPrefix = prefix+'_crv'+strInd
# Create curve group
curveGrp = crvPrefix+'_grp'
curveGrp = mc.createNode('transform',n=curveGrp)
curveGrp = mc.parent(curveGrp,mainGrp)[0]
curveGrpList.append(curveGrp)
# Get surface curve
srfCurveName = crvPrefix+'_crv'
srfCurve = mc.duplicateCurve(surface+'.'+direction.lower()+'['+str(i*spanInc)+']',ch=0,rn=0,local=0,n=srfCurveName)
srfCurve = mc.parent(srfCurve[0],curveGrp)[0]
curveList.append(srfCurve)
# Generate curve locators
curveLocatorList = glTools.utils.curve.locatorEpCurve(srfCurve,locatorScale=0.05,prefix=crvPrefix)
curveLocatorList = mc.parent(curveLocatorList,curveGrp)
curveLocList.append(curveLocatorList)
# Create geometry constraints
for loc in curveLocatorList:
geomConstraint = crvPrefix+'_geometryConstraint'
geomConstraint = mc.geometryConstraint(targetSurface,loc,n=geomConstraint)
geomConstraintList.append(geomConstraint[0])
# Center group pivot
mc.xform(curveGrp,cp=True)
# Delete original surface
surfaceName = prefix+'_surface'
if not keepOriginal:
surfaceName = surface
mc.delete(surface)
# Loft new surface
surfaceLoft = mc.loft(curveList,ch=1,u=1,c=0,ar=1,d=3,ss=1,rn=0,po=0,rsn=True)
surface = mc.rename(surfaceLoft[0],surface)
surface = mc.parent(surface,mainGrp)[0]
mc.reorder(surface,f=True)
loft = mc.rename(surfaceLoft[1],prefix+'_loft')
# Return result
return[surface,loft,curveList,curveGrpList,curveLocList,geomConstraintList]
def rebuild_old(surface,spansU=0,spansV=0,fullRebuildU=False,fullRebuildV=False,replaceOrig=False):
'''
Do brute force surface rebuild for even parameterization
@param surface: Nurbs surface to rebuild
@type surface: str
@param spansU: Number of spans along U. If 0, keep original value.
@type spansU: int
@param spansV: Number of spans along V. If 0, keep original value.
@type spansV: int
@param replaceOrig: Replace original surface, or create new rebuilt surface.
@type replaceOrig: bool
'''
# Check surface
if not isSurface(surface):
raise Exception('Object "'+surface+'" is not a valid surface!')
# Check spans
if not spansU: spansU = mc.getAttr(surface+'.spansU')
if not spansV: spansV = mc.getAttr(surface+'.spansV')
# -------------
# - Rebuild V -
# Get V range
minu = mc.getAttr(surface+'.minValueU')
maxu = mc.getAttr(surface+'.maxValueU')
u = minu + (maxu - minu) * 0.5
# Extract isoparm curve
iso_crv = mc.duplicateCurve(surface+'.u['+str(u)+']',ch=0,rn=0,local=0)[0]
iso_len = mc.arclen(iso_crv)
iso_inc = iso_len / spansV
curveFn = glTools.utils.curve.getCurveFn(iso_crv)
iso_list = [surface+'.v['+str(curveFn.findParamFromLength(iso_inc*i))+']' for i in range(spansV+1)]
mc.delete(iso_crv)
# Check full rebuild
if fullRebuildU:
# Extract isoparm curves
iso_crv_list = [mc.duplicateCurve(iso,ch=False,rn=False,local=False)[0] for iso in iso_list]
# Rebuild isoparm curves
for iso_crv in iso_crv_list:
mc.rebuildCurve(iso_crv,ch=False,rpo=True,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=0,d=3,tol=0)
# Loft final surface
int_surface = mc.loft(iso_crv_list,ch=0,u=1,c=0,ar=1,d=3,ss=1,rn=0,po=0,rsn=True)[0]
# Delete intermediate curves
mc.delete(iso_crv_list)
else:
# Loft intermediate surface
int_surface = mc.loft(iso_list,ch=0,u=1,c=0,ar=1,d=3,ss=1,rn=0,po=0,rsn=True)[0]
# -------------
# - Rebuild U -
# Get V range (intermediate surface)
minv = mc.getAttr(int_surface+'.minValueV')
maxv = mc.getAttr(int_surface+'.maxValueV')
v = minv + (maxv - minv) * 0.5
# Extract isoparm curve (intermediate surface)
iso_crv = mc.duplicateCurve(int_surface+'.v['+str(v)+']',ch=0,rn=0,local=0)[0]
iso_len = mc.arclen(iso_crv)
iso_inc = iso_len / spansU
curveFn = glTools.utils.curve.getCurveFn(iso_crv)
iso_list = [int_surface+'.u['+str(curveFn.findParamFromLength(iso_inc*i))+']' for i in range(spansU+1)]
mc.delete(iso_crv)
# Check full rebuild
if fullRebuildV:
# Extract isoparm curves
iso_crv_list = [mc.duplicateCurve(iso,ch=False,rn=False,local=False)[0] for iso in iso_list]
# Rebuild isoparm curves
for iso_crv in iso_crv_list:
mc.rebuildCurve(iso_crv,ch=False,rpo=True,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=0,d=3,tol=0)
# Loft final surface
rebuild_surface = mc.loft(iso_crv_list,ch=0,u=1,c=0,ar=1,d=3,ss=1,rn=0,po=0,rsn=True)[0]
# Delete intermediate curves
mc.delete(iso_crv_list)
else:
# Loft final surface
rebuild_surface = mc.loft(iso_list,ch=0,u=1,c=0,ar=1,d=3,ss=1,rn=0,po=0,rsn=True)[0]
rebuild_surface = mc.rename(rebuild_surface,surface+'_rebuild')
rebuild_surfaceShape = mc.listRelatives(surface,s=True,ni=True)[0]
mc.delete(int_surface)
# Initialize return value
outputShape = rebuild_surfaceShape
# --------------------
# - Replace Original -
if replaceOrig:
"""
# Get original shape
shapes = glTools.utils.shape.getShapes(surface,nonIntermediates=True,intermediates=False)
if not shapes:
# Find Intermediate Shapes
shapes = glTools.utils.shape.listIntermediates(surface)
# Check shapes
if not shapes:
raise Exception('Unable to determine shape for surface "'+surface+'"!')
# Check connections
if mc.listConnections(shapes[0]+'.create',s=True,d=False):
# Find Intermediate Shapes
shapes = glTools.utils.shape.findInputShape(shapes[0])
"""
# Check history
shapes = mc.listRelatives(surface,s=True,ni=True)
if not shapes: raise Exception('Unable to determine shape for surface "'+surface+'"!')
shape = shapes[0]
shapeHist = mc.listHistory(shape)
if shapeHist.count(shape): shapeHist.remove(shape)
if shapeHist: print('Surface "" contains construction history, creating new shape!')
# Override shape info and delete intermediate
mc.connectAttr(rebuild_surfaceShape+'.local',shape+'.create',f=True)
outputShape = shape
# Return result
return outputShape
def buildSplash(self):
objectName = str(self.getObject.text())
if self.checkWake.isChecked()==True:
wakeEmitter = str(self.getWake.text())
else:
wakeEmitter = "OceanWakeEmitter1"
if self.checkOcean.isChecked()==True:
oceanShader = str(self.getOcean.text())
else:
oceanShader = "oceanShader1"
###Bcreating Splash Disc
objectNameAxis = generator.getMaxAndMinAxis(objectName)
#generator_Return: 0-maxX, 1-minX, 2-maxY, 3-minY, 4-maxZ, 5-minZ
avrgX = objectNameAxis[0] - objectNameAxis[1]
avrgZ = objectNameAxis[4] - objectNameAxis[5]
avrgY = objectNameAxis[2] - objectNameAxis[3]
if avrgX > avrgZ:
SplashCurve = avrgX
else:
SplashCurve = avrgZ
baseCurve = cmds.circle(name="base",normal=[0,1,0],radius=SplashCurve/1.5)
headCurve = cmds.circle(name="head",normal=[0,1,0],radius=SplashCurve/2)
cmds.move(0,(avrgY/4),0,headCurve)
cmds.rebuildCurve ("base", ch=1, rpo=1, rt=0, end=1, kr=0, kcp=0, kep=0, kt=0, s=100, d=7, tol=0.01)
cmds.rebuildCurve ("head", ch=1, rpo=1, rt=0, end=1, kr=0, kcp=0, kep=0, kt=0, s=100, d=7, tol=0.01)
splashDisc = cmds.loft ("base", "head",name="%s_SplashDisc"%objectName, ch=1, u=1, c=0, ar=1, d=3, ss=int(avrgY+1), rn=0, po=0, rsn=True)
#Return: 0-SplashDisc, 1-loft1
cmds.delete(baseCurve,headCurve)
cmds.setAttr("%s.visibility"%splashDisc[0], False )
objectPosition = cmds.xform(objectName, query=True, translation=True, worldSpace=True )
cmds.move(objectPosition[0], 0, objectPosition[2], splashDisc[0])
###adding emitter and particle to Object
objectNameEmitter = cmds.emitter(objectName,type='surface',rate=0,scaleRateByObjectSize=False,needParentUV=False,cycleEmission="none",
cycleInterval=1,speed=1,speedRandom=0,normalSpeed=1,tangentSpeed=0,maxDistance=0,minDistance=0,
directionX=1,directionY=0,directionZ=0,spread=0,name="%s_emitter"%objectName)
#Return: 0-objectName, 1-objectName_emitter
objectNameParticle = cmds.particle(name="%s_particle"%objectName)
cmds.connectDynamic(objectNameParticle[0],emitters=objectNameEmitter[0])
###adding emitter and particle to Splash Disc
splashDiscEmitter = cmds.emitter(splashDisc[0],type='surface',rate=0,scaleRateByObjectSize=False,needParentUV=False,cycleEmission="none",
cycleInterval=1,speed=1,speedRandom=1.5,normalSpeed=1,tangentSpeed=0,maxDistance=0,minDistance=0,
directionX=1,directionY=0,directionZ=0,spread=0,name="%s_emitter"%splashDisc[0])
#Return: 0-SplashDisc, 1-SplashDisc_emitter
splashDiscParticle = cmds.particle(name="%s_particle"%splashDisc[0])
cmds.connectDynamic(splashDiscParticle[0],emitters=splashDiscEmitter[0])
#connecting the X and Z object position to Splash Disc to follow
cmds.connectAttr("%s.translate.translateZ"%objectName, "%s.translate.translateZ"%splashDisc[0])
cmds.connectAttr("%s.translate.translateX"%objectName, "%s.translate.translateX"%splashDisc[0])
#setting up the splash Disc particle Setting
cmds.setAttr("%s.lifespanMode"%splashDiscParticle[1],3)
cmds.setAttr("%s.lifespanRandom"%splashDiscParticle[1],0.5)
cmds.setAttr("%s.conserve"%splashDiscParticle[1],0.983)
cmds.setAttr("%s.inheritFactor"%splashDiscParticle[1],0.2)
cmds.setAttr("%s.particleRenderType"%splashDiscParticle[1],5)
cmds.addAttr(splashDiscParticle[1], keyable=True, ln="useLighting", at="bool", dv=False)
cmds.addAttr(splashDiscParticle[1], ln="spriteScaleYPP", dt="doubleArray")
cmds.addAttr(splashDiscParticle[1], ln="spriteScaleYPP0", dt="doubleArray")
cmds.addAttr(splashDiscParticle[1], ln="spriteScaleXPP", dt="doubleArray")
cmds.addAttr(splashDiscParticle[1], ln="spriteScaleXPP0", dt="doubleArray")
cmds.addAttr(splashDiscParticle[1], ln="spriteTwistPP", dt="doubleArray")
cmds.addAttr(splashDiscParticle[1], ln="spriteTwistPP0", dt="doubleArray")
#creating Ramp for Splash Disc particle
splashDiscParticle_spriteScaleXPP = cmds.arrayMapper(target=splashDiscParticle[1], destAttr="spriteScaleXPP", inputV="ageNormalized", type="ramp")
ramp_spriteScaleXPP = cmds.listConnections(splashDiscParticle_spriteScaleXPP, type="ramp")
ramp_spriteScaleXPP = cmds.rename(ramp_spriteScaleXPP[1], "%s_spriteScaleXPP_Rampe"%splashDiscParticle[1])
cmds.setAttr("%s.colorEntryList[2].color"%ramp_spriteScaleXPP, 0,0,0)
cmds.setAttr("%s.colorEntryList[2].position"%ramp_spriteScaleXPP, 1)
cmds.setAttr("%s.colorEntryList[1].color"%ramp_spriteScaleXPP, 0.5,0.5,0.5)
cmds.setAttr("%s.colorEntryList[1].position"%ramp_spriteScaleXPP, 0.165)
cmds.setAttr("%s.colorEntryList[0].color"%ramp_spriteScaleXPP, 1,1,1)
cmds.setAttr("%s.colorEntryList[0].position"%ramp_spriteScaleXPP, 0)
splashDiscParticle_spriteScaleYPP = cmds.arrayMapper(target=splashDiscParticle[1], destAttr="spriteScaleYPP", inputV="ageNormalized", type="ramp")
ramp_spriteScaleYPP = cmds.listConnections(splashDiscParticle_spriteScaleYPP, type="ramp")
ramp_spriteScaleYPP = cmds.rename(ramp_spriteScaleYPP[1], "%s_SpriteScaleYPP_Rampe"%splashDiscParticle[1])
cmds.setAttr("%s.colorEntryList[2].color"%ramp_spriteScaleYPP, 0,0,0)
cmds.setAttr("%s.colorEntryList[2].position"%ramp_spriteScaleYPP, 1)
cmds.setAttr("%s.colorEntryList[1].color"%ramp_spriteScaleYPP, 0.5,0.5,0.5)
cmds.setAttr("%s.colorEntryList[1].position"%ramp_spriteScaleYPP, 0.165)
cmds.setAttr("%s.colorEntryList[0].color"%ramp_spriteScaleYPP, 1,1,1)
cmds.setAttr("%s.colorEntryList[0].position"%ramp_spriteScaleYPP, 0)
#setting up the object particle Setting
cmds.setAttr("%s.lifespanMode"%objectNameParticle[1],3)
cmds.setAttr("%s.particleRenderType"%objectNameParticle[1],7)
cmds.addAttr(objectNameParticle[1], keyable=True, ln="threshold", at="float", min=0, max=10, dv=0.7)
cmds.addAttr(objectNameParticle[1], keyable=True, ln="radius", at="float", min=0, max=10, dv=0.5)
cmds.addAttr (objectNameParticle[1], ln="radiusPP", dt="doubleArray")
#creating Ramp for object particle
objectNameParticle_radiusPP = cmds.arrayMapper(target=objectNameParticle[1], destAttr="radiusPP", inputV="ageNormalized", type="ramp")
ramp_radiusPP = cmds.listConnections(objectNameParticle_radiusPP, type="ramp")
ramp_radiusPP = cmds.rename(ramp_radiusPP[1], "%s_RadiusPP_Rampe"%objectNameParticle[1])
cmds.setAttr("%s.colorEntryList[3].color"%ramp_radiusPP, 0.056,0.056,0.056)
cmds.setAttr("%s.colorEntryList[3].position"%ramp_radiusPP, 1)
cmds.setAttr("%s.colorEntryList[2].color"%ramp_radiusPP, 0.223,0.223,0.223)
cmds.setAttr("%s.colorEntryList[2].position"%ramp_radiusPP, 0.690)
cmds.setAttr("%s.colorEntryList[1].color"%ramp_radiusPP, 0.178,0.178,0.178)
cmds.setAttr("%s.colorEntryList[1].position"%ramp_radiusPP, 0.455)
cmds.setAttr("%s.colorEntryList[0].color"%ramp_radiusPP, 0,0,0)
cmds.setAttr("%s.colorEntryList[0].position"%ramp_radiusPP, 0)
#adding gravity to SplashDisc
splashDiscGravity = cmds.gravity(name="%s_GravityField"%splashDiscParticle[0], pos=[0,0,0], m=9.8, att=0, dx=0, dy=-1, dz=0, mxd=-1, vsh="none", vex=0, vof=[0,0,0], vsw=360, tsr=0.5)
cmds.connectDynamic(splashDiscParticle[0], fields=splashDiscGravity)
#adding gravity to Object
objectNameGravity = cmds.uniform(name="%s_UniformField"%objectNameParticle[0], pos=[0,0,0], m=5, att=1, dx=1, dy=-1, dz=0, mxd=-1, vsh="none", vex=0, vof=[0,0,0], vsw=360, tsr=0.5)
cmds.connectDynamic(objectNameParticle[0], fields=objectNameGravity)
print objectNameGravity
cmds.setAttr("%s.directionX"%objectNameGravity[0],0)
cmds.setAttr("%s.directionY"%objectNameGravity[0],1)
cmds.setAttr("%s.directionZ"%objectNameGravity[0],0)
cmds.setAttr("%s.magnitude"%objectNameGravity[0],28)
#adding Expression for Object and SplashDisc
generator.objectNameParticleExpressionBeforeDynamics(objectNameParticle[1], oceanShader)
generator.splashDiscParticleExpressionBeforeDynamics(splashDiscParticle[1], oceanShader)
generator.splashDiscParticleExpressionAfterDynamics(splashDiscParticle[1])
generator.splashDiscParticleExpressionCreation(splashDiscParticle[1])
if "ocean_MainExpression" not in cmds.ls() :
generator.createMainExpression(objectNameEmitter[1])
if "ocean_MainExpression" in cmds.ls() :
generator.editMainExpression(objectName, splashDiscEmitter[0], oceanShader, objectNameEmitter[1], wakeEmitter, splashDiscEmitter[1])
# num=0
if "mainSplashDisc_Shader" not in cmds.ls():
generator.shaderSetup()
# cmds.select(splashDiscEmitter[0], replace=True)
# cmds.sets(edit=True,forceElement="mainSplashDisc_ShaderSG")
cmds.sets(splashDiscParticle, edit = True, forceElement = 'mainSplashDisc_ShaderSG')
else:
cmds.sets(splashDiscParticle, edit = True, forceElement = 'mainSplashDisc_ShaderSG')
# while cmds.connectionInfo("mainSplashDisc_ShaderSG.dagSetMembers[%s]"%num,getExactDestination=True) != "":
# num+=1
# cmds.connectAttr(splashDiscEmitter[1] + ".instObjGroups[0]", "mainSplashDisc_Shader.dagSetMembers[%s]"%num, force = True)
# else:
# while cmds.connectionInfo("mainSplashDisc_ShaderSG.dagSetMembers[%s]"%num,getExactDestination=True) != "":
# num+=1
# cmds.connectAttr(splashDiscEmitter[1] + ".instObjGroups[0]", "mainSplashDisc_Shader.dagSetMembers[%s]"%num, force = True)
# pSphere1_SplashDisc.translateX = pSphere1.translateX;
# pSphere1_SplashDisc.translateZ = pSphere1.translateZ;
return
def buildRibbonSpine(startJoint,endJoint,ribbonJoints,spans=0,ikSwitchCtrl='',ikSwitchAttr='spineIk',ctrlScale=1.0,prefix='cn_spine'):
'''
'''
# ==========
# - Checks -
# ==========
# Ribbon Joints
for jnt in ribbonJoints:
if not mc.objExists(jnt):
raise Exception('Ribbon joint "'+jnt+'" does not exist!')
# ====================
# - Build Spine Base -
# ====================
# Get Joint List
spineJnts = glTools.utils.joint.getJointList(startJoint,endJoint)
spine = build(startJoint,endJoint,ikSwitchCtrl,ikSwitchAttr,ctrlScale,prefix)
spine_module = spine[0]
spine_attach = spine[1]
spine_rig_grp = prefix+'_rig_grp'
# =========================
# - Process Ribbon Joints -
# =========================
for ribbonJoint in ribbonJoints:
# Delete incoming connections
mc.delete(mc.listConnections(ribbonJoint,s=True,d=False))
# ======================
# - Build Spine Ribbon -
# ======================
locList = []
lfLocList = []
rtLocList = []
# Create Ribbon Locators
for i in range(len(spineJnts)):
pt = glTools.utils.base.getPosition(spineJnts[i])
strInd = glTools.utils.stringUtils.alphaIndex(i)
loc = mc.spaceLocator(p=(0,0,0),n=prefix+strInd+'_loc')[0]
lfLoc = mc.spaceLocator(p=(0.5,0,0),n=prefix+'_lf'+strInd+'_loc')[0]
rtLoc = mc.spaceLocator(p=(-0.5,0,0),n=prefix+'_rt'+strInd+'_loc')[0]
# Parent and position locators
mc.parent([lfLoc,rtLoc],loc)
mc.move(pt[0],pt[1],pt[2],loc,ws=True,a=True)
mc.parent(loc,spineJnts[i])
mc.setAttr(loc+'.v',0)
# Append Lists
locList.append(loc)
lfLocList.append(lfLoc)
rtLocList.append(rtLoc)
# Create Loft Curves
lfCurve = glTools.utils.curve.createFromLocators(lfLocList,degree=1,attach=True,prefix=prefix+'A')
rtCurve = glTools.utils.curve.createFromLocators(rtLocList,degree=1,attach=True,prefix=prefix+'B')
lfCurveShape = mc.listRelatives(lfCurve,s=True,pa=True)[0]
rtCurveShape = mc.listRelatives(rtCurve,s=True,pa=True)[0]
glTools.utils.shape.createIntermediate(lfCurveShape)
glTools.utils.shape.createIntermediate(rtCurveShape)
# Rebuild Loft Curves
if not spans: spans = len(spineJnts) - 1
lfRebuildCrv = mc.rebuildCurve(lfCurve,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=spans,d=3,tol=0)
rtRebuildCrv = mc.rebuildCurve(rtCurve,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=spans,d=3,tol=0)
lfRebuildCrv = mc.rename(lfRebuildCrv[1],prefix+'A_rebuildCurve')
rtRebuildCrv = mc.rename(rtRebuildCrv[1],prefix+'B_rebuildCurve')
# Generate Loft Surface
loft = mc.loft([lfCurve,rtCurve],d=1,n=prefix+'_surface')
loftNode = mc.rename(loft[1],prefix+'_loft')
spineSurface = loft[0]
rebuildSrf = mc.rebuildSurface(spineSurface,ch=True,rpo=True,end=True,rt=0,kr=0,kcp=True,dir=2,du=1,dv=3)
rebuildSrf = mc.rename(rebuildSrf[1],prefix+'_rebuildSurface')
# Parent to rig group
ribbonParts = [lfCurve,rtCurve,spineSurface]
for ribbonPart in ribbonParts:
mc.setAttr(ribbonPart+'.v',0)
mc.parent(ribbonPart,spine_rig_grp)
# ========================
# - Attach Ribbon Joints -
# ========================
inc = 1.0 / (len(ribbonJoints) - 1)
ribbonJointGrps = []
for i in range(len(ribbonJoints)):
# Create Joint Buffer Group
strInd = glTools.utils.stringUtils.alphaIndex(i)
prefix = glTools.utils.stringUtils.stripSuffix(ribbonJoints[i])
mc.select(cl=True)
ribbonJointGrp = mc.joint(n=prefix+'ConA_jnt')
mc.delete(mc.pointConstraint(ribbonJoints[i],ribbonJointGrp))
ribbonJointGrps.append(ribbonJointGrp)
# Attach Joint Buffer Group
glTools.utils.attach.attachToSurface(spineSurface,ribbonJointGrp,useClosestPoint=True,orient=True,uAxis='y',vAxis='x',uAttr='uCoord',vAttr='vCoord',alignTo='v',prefix=prefix+strInd)
# Parent Ribbon Joint
mc.parent(ribbonJoints[i],ribbonJointGrp)
mc.parent(ribbonJointGrp,spine_rig_grp)
# Connect Module Scale
mc.connectAttr(spine_module+'.uniformScale',ribbonJoints[i]+'.sx',f=True)
mc.connectAttr(spine_module+'.uniformScale',ribbonJoints[i]+'.sy',f=True)
mc.connectAttr(spine_module+'.uniformScale',ribbonJoints[i]+'.sz',f=True)
# ======================
# - Set Channel States -
# ======================
chStateUtil = glTools.utils.channelState.ChannelState()
chStateUtil.setFlags([2,2,2,2,2,2,2,2,2,1],objectList=locList)
chStateUtil.setFlags([2,2,2,2,2,2,2,2,2,1],objectList=lfLocList)
chStateUtil.setFlags([2,2,2,2,2,2,2,2,2,1],objectList=rtLocList)
chStateUtil.setFlags([2,2,2,2,2,2,2,2,2,1],objectList=[lfCurve,rtCurve,spineSurface])
chStateUtil.setFlags([2,2,2,2,2,2,2,2,2,1],objectList=ribbonJoints)
chStateUtil.setFlags([2,2,2,2,2,2,2,2,2,1],objectList=ribbonJointGrps)
# =================
# - Return Result -
# =================
return [spine_module,spine_attach]
def rebuild(surface, spansU=0, spansV=0, fullRebuildU=False, fullRebuildV=False, rebuildUfirst=True, replaceOrig=False):
"""
Do brute force surface rebuild for even parameterization
@param surface: Nurbs surface to rebuild
@type surface: str
@param spansU: Number of spans along U. If 0, keep original value.
@type spansU: int
@param spansV: Number of spans along V. If 0, keep original value.
@type spansV: int
@param replaceOrig: Replace original surface, or create new rebuilt surface.
@type replaceOrig: bool
"""
# ==========
# - Checks -
# ==========
# Check surface
if not isSurface(surface):
raise Exception('Object "' + surface + '" is not a valid surface!')
# Check spans
if not spansU: spansU = cmds.getAttr(surface + '.spansU')
if not spansV: spansV = cmds.getAttr(surface + '.spansV')
# =============
# - Rebuild U -
# =============
# Get V range
if rebuildUfirst:
dir = 'u'
opp = 'v'
spans = spansU
min = cmds.getAttr(surface + '.minValueV')
max = cmds.getAttr(surface + '.maxValueV')
else:
dir = 'v'
opp = 'u'
spans = spansV
min = cmds.getAttr(surface + '.minValueU')
max = cmds.getAttr(surface + '.maxValueU')
val = min + (max - min) * 0.5
# Caluculate surface length
iso_crv = cmds.duplicateCurve(surface + '.' + opp + '[' + str(val) + ']', ch=0, rn=0, local=0)[0]
iso_len = cmds.arclen(iso_crv)
iso_inc = iso_len / spans
# Get spaced isoparm list
curveFn = glTools.utils.curve.getCurveFn(iso_crv)
iso_list = [surface + '.' + dir + '[' + str(curveFn.findParamFromLength(iso_inc * i)) + ']' for i in
range(spans + 1)]
cmds.delete(iso_crv)
# Check full rebuild
if fullRebuildV:
# Extract isoparm curves
iso_crv_list = [cmds.duplicateCurve(iso, ch=False, rn=False, local=False)[0] for iso in iso_list]
# Rebuild isoparm curves
for iso_crv in iso_crv_list:
cmds.rebuildCurve(iso_crv, ch=False, rpo=True, rt=0, end=1, kr=0, kcp=0, kep=1, kt=1, s=0, d=3, tol=0)
# Loft final surface
int_surface = cmds.loft(iso_crv_list, ch=0, u=1, c=0, ar=1, d=3, ss=1, rn=0, po=0, rsn=True)[0]
# Delete intermediate curves
cmds.delete(iso_crv_list)
else:
# Loft intermediate surface
int_surface = cmds.loft(iso_list, ch=0, u=1, c=0, ar=1, d=3, ss=1, rn=0, po=0, rsn=True)[0]
# =============
# - Rebuild V -
# =============
# Get V range (intermediate surface)
if rebuildUfirst:
dir = 'u'
opp = 'v'
spans = spansV
min = cmds.getAttr(int_surface + '.minValueU')
max = cmds.getAttr(int_surface + '.maxValueU')
else:
dir = 'v'
opp = 'u'
spans = spansU
min = cmds.getAttr(int_surface + '.minValueV')
max = cmds.getAttr(int_surface + '.maxValueV')
val = min + (max - min) * 0.5
# Caluculate surface length (intermediate surface)
iso_crv = cmds.duplicateCurve(int_surface + '.' + opp + '[' + str(val) + ']', ch=0, rn=0, local=0)[0]
iso_len = cmds.arclen(iso_crv)
iso_inc = iso_len / spans
# Get spaced isoparm list
curveFn = glTools.utils.curve.getCurveFn(iso_crv)
iso_list = [int_surface + '.' + dir + '[' + str(curveFn.findParamFromLength(iso_inc * i)) + ']' for i in
range(spans + 1)]
cmds.delete(iso_crv)
# Check full rebuild
if fullRebuildU:
# Extract isoparm curves
iso_crv_list = [cmds.duplicateCurve(iso, ch=False, rn=False, local=False)[0] for iso in iso_list]
# Rebuild isoparm curves
for iso_crv in iso_crv_list:
cmds.rebuildCurve(iso_crv, ch=False, rpo=True, rt=0, end=1, kr=0, kcp=0, kep=1, kt=1, s=0, d=3, tol=0)
# Loft final surface
rebuild_surface = cmds.loft(iso_crv_list, ch=0, u=1, c=0, ar=1, d=3, ss=1, rn=0, po=0, rsn=True)[0]
# Delete intermediate curves
cmds.delete(iso_crv_list)
else:
# Loft final surface
rebuild_surface = cmds.loft(iso_list, ch=0, u=1, c=0, ar=1, d=3, ss=1, rn=0, po=0, rsn=True)[0]
# Rename rebuilt surface
rebuild_surface = cmds.rename(rebuild_surface, surface + '_rebuild')
rebuild_surfaceShape = cmds.listRelatives(surface, s=True, ni=True, pa=True)[0]
cmds.delete(int_surface)
# Re-parameterize 0-1
cmds.rebuildSurface(rebuild_surface, ch=False, rpo=True, dir=2, rt=0, end=1, kr=0, kcp=1, kc=1, tol=0, fr=0)
# Initialize return value
outputShape = rebuild_surfaceShape
# ====================
# - Replace Original -
# ====================
if replaceOrig:
"""
# Get original shape
shapes = glTools.utils.shape.getShapes(surface,nonIntermediates=True,intermediates=False)
if not shapes:
# Find Intermediate Shapes
shapes = glTools.utils.shape.listIntermediates(surface)
# Check shapes
if not shapes:
raise Exception('Unable to determine shape for surface "'+surface+'"!')
# Check connections
if cmds.listConnections(shapes[0]+'.create',s=True,d=False):
# Find Intermediate Shapes
shapes = glTools.utils.shape.findInputShape(shapes[0])
"""
# Check history
shapes = cmds.listRelatives(surface, s=True, ni=True, pa=True)
if not shapes: raise Exception('Unable to determine shape for surface "' + surface + '"!')
shape = shapes[0]
shapeHist = cmds.listHistory(shape)
if shapeHist.count(shape): shapeHist.remove(shape)
if shapeHist: print('Surface "" contains construction history, creating new shape!')
# Override shape info and delete intermediate
cmds.connectAttr(rebuild_surfaceShape + '.local', shape + '.create', f=True)
outputShape = shape
# =================
# - Return Result -
# =================
return outputShape
def CurveToCreateJnt(self , planeName , CvNumOfSpans , curv , reCurve , degree , aimVector = (0,1,0) , upVector = (0,0,1) , axis = 'auto'):
#move -r -os -wd
#mc.move(0.01,0.011,0.012,curv + '.cv[0]',r = True,wd = True)
#axis = 'x'
if axis == 'auto':
axis1 = 'z'
upTranslate = 'translateY'
else:
axis1 = 'y'
upTranslate = 'translateZ'
jntsuffix = '_jnt'
if reCurve == 'yes':
selCurve = mc.rebuildCurve(curv,ch=1,rpo=0,rt=0,end=1,kr=0,kcp=0,kep=1,kt=0,s=CvNumOfSpans,d=degree,tol=0.01)[0]
mc.select(selCurve)
mc.DeleteHistory()
else:
selCurve = curv
#selCurve = mc.ls(sl = True)[0]
CurveEps = mc.ls(selCurve + '.ep[:]',fl = True)
CurveCvs = mc.ls(selCurve + '.cv[:]',fl = True)
worlds = []
cvworlds = []
jnts = []
for i in range(len(CurveEps)):
ep = CurveEps[i]
world = mc.xform(ep,q = True,ws = True,t = True)
mc.select(cl = True)
jnt = mc.joint(p = world,name = planeName + str(i + 1) + jntsuffix)
worlds.append(world)
jnts.append(jnt)
for i in range(len(CurveCvs)):
cv = CurveCvs[i]
cvworld = mc.xform(cv,q = True,ws = True,t = True)
cvworlds.append(cvworld)
mc.select(cl = True)
axisLocate = mc.joint(name = planeName + '_axisLocate')
axisLocateZero = mc.group(axisLocate,em = False,name = axisLocate + '_zero')
mc.delete(mc.pointConstraint(jnts,axisLocateZero,mo = False))
#if CvNumOfSpans >= 2:
#axisFacet = mc.polyCreateFacet(p = worlds,ch = False)[0]
#elif CvNumOfSpans == 1:
#axisFacet = mc.polyCreateFacet(p = cvworlds,ch = False)[0]
axisFacet = self.axisPanelCreate(planeName,curv,axis)
FacetShape = mc.listRelatives(axisFacet,s = True)[0]
UV = self.closestPointOnModel(FacetShape,axisLocate)
U = UV[0]
V = UV[1]
follic = self.follicCreate(FacetShape,planeName + '_axis_follic',U,V)
#----------------------------------orient joint-------------------------------------
mc.delete(mc.parentConstraint(follic,axisLocateZero,mo = False))
axisLocateZeroRx = mc.getAttr(axisLocateZero + '.rotateX')
mc.setAttr(axisLocateZero + '.rotateX',abs(axisLocateZeroRx))
mc.setAttr(axisLocate + '.' + upTranslate,1)
wut = 'object'
wuo = axisLocate
for i in range(len(jnts)-1):
jnt = jnts[i]
nextJnt = jnts[i+1]
mc.delete(mc.pointConstraint(jnt,axisLocateZero,mo = False,w = 1))
mc.delete(mc.aimConstraint(nextJnt,jnt,offset = (0,0,0),w = 1,aim = aimVector,u = upVector,wut = wut,wuo = wuo))
mc.delete(mc.orientConstraint(jnts[-2],jnts[-1],mo = False,w = 1))
mc.makeIdentity(jnts,apply = True,r = 1,n = 0)
#----------------------------------create plane------------------------------------------
offsetGrp = mc.group(em = True,name = planeName + '_cv_offset')
offsetZero = mc.group(offsetGrp,name = offsetGrp + '_zero')
mc.delete(mc.parentConstraint(follic,offsetZero,mo = False))
Curve01 = mc.duplicate(selCurve)[0]
Curve02 = mc.duplicate(selCurve)[0]
mc.parent(Curve01,offsetGrp)
mc.setAttr(offsetGrp + '.t' + axis1,1)
mc.parent(Curve01,w = True)
mc.parent(Curve02,offsetGrp)
mc.setAttr(offsetGrp + '.t' + axis1,0)
mc.parent(Curve02,w = True)
mc.delete(axisFacet,axisLocateZero,follic,offsetZero)
Plane = mc.loft(Curve01,Curve02,ch = True,u = True,c = False,ar = True,d = 3,ss = True,rn = False,po = False,rsn = True,name = planeName)[0]
mc.select(Plane)
mc.DeleteHistory()
mc.delete(Curve01,Curve02)
if reCurve == 'yes':
mc.delete(selCurve)
return Plane,jnts
def _buildSideSplashEmitter(name = '', boatName = '', splashParticleName = [], boatIntersectCurveShape = '', sideAnimatable = '', presetName = None):
"""
New builder for sideSplash nParticle Emitter
Checks if the NPARTICLE_EMITTLERS_hrc exists or not too
@param name: The name of the new emitter
@param splashParticleName: List of the names of nParticleShape nodes to connect to the emitter
@param boatIntersectCurveShape: The name of the intersection curve to emit from.
@type name: String
@type splashParticleName: List
@type boatIntersectCurveShape: String
"""
if not cmds.objExists('nPARTICLE_EMITTERS_hrc'):
cmds.group(n = 'nPARTICLE_EMITTERS_hrc', em = True)
debug(None, method = '_buildSideSplashEmitter', message = 'name: %s' % name, verbose = False)
# Get base flat surface
lineCurve = cmds.curve( name = '%s_extrudeCurve' % name, degree = 1, point = [(-0.01, 0, 0), (0.01, 0, 0)] )
flatSurface = cmds.extrude(lineCurve, boatIntersectCurveShape, name = '%s_flatSurface' % name, constructionHistory = True, range = False, polygon = 0, useComponentPivot = 1, fixedPath = True, useProfileNormal = True, extrudeType = 2, reverseSurfaceIfPathReversed = True)[0]
cmds.rebuildSurface(flatSurface, constructionHistory = True, replaceOriginal = True, rebuildType = 0, endKnots = 1, keepCorners = False, spansU = 1, degreeU = 1, spansV = 100, degreeV = 3)
# Offset upwards curve from surface
offsetUp = cmds.offsetCurve('%s.u[0.5]' % flatSurface, name = '%s_offsetUp' % name, distance = 0, constructionHistory = True, range = 0, subdivisionDensity = 1)[0]
cmds.rebuildCurve(offsetUp, constructionHistory = False, replaceOriginal = True, end = 1, keepRange = 0, keepControlPoints = True, degree = 1)
cmds.setAttr('%s.translateY' % offsetUp, 0.01)
# Offset from upwards curve with distance and translate down to get the 45 degree angle
offset_distance = -0.01
offsetOut = cmds.offsetCurve(offsetUp, name = '%s_offsetOut' % name, distance = offset_distance, constructionHistory = True, range = 0, subdivisionDensity = 1)[0]
cmds.setAttr('%s.translateY' % offsetOut, offset_distance)
# Finally, loft a non-flipping surface solution (45 degree angle of the boat)
noFlipSurface = cmds.loft(offsetUp, offsetOut, degree = 1, constructionHistory = True, range = 0, polygon = 0, sectionSpans = 1)[0]
noFlipSurface = cmds.rename(noFlipSurface, '%s_noFlipSurface' % name)
## Build the emitter
emitter = cmds.emitter(noFlipSurface, name = '%s_emitter' % name, type = 'surface')
# Create closestPointOnSurface for acceleration expression where front more acceleration
cPoS = cmds.createNode('closestPointOnSurface', name = '%s_cPoS' % name)
cmds.connectAttr('%s.worldSpace' % noFlipSurface, '%s.inputSurface' % cPoS)
## Build the emitter group if it doesn't already exist
emitterGroup = '%s_hrc' % name
if not cmds.objExists(emitterGroup):
cmds.group(lineCurve, flatSurface, offsetUp, offsetOut, noFlipSurface, emitter[0], n = emitterGroup)
debug(None, method = '_buildSideSplashEmitter', message = 'emitterName: %s' % emitter[1], verbose = False)
## Check if a custom preset has been assigned via the func flags for the emitter, if not use the default preset...
if presetName:
pathToPreset = '%s/%s' %(CONST.EMITTERBASEPRESETPATH, presetName)
debug(None, method = '_buildSideSplashEmitter', message = 'pathToPreset: %s' % pathToPreset, verbose = False)
mel.eval( 'applyPresetToNode "%s" "" "" "%s" 1;' %(emitter[1], pathToPreset) )
## Now parent it
try: cmds.parent(emitterGroup, 'nPARTICLE_EMITTERS_hrc')
except: pass
## Connect the emitter to the particles
debug(None, method = '_buildSideSplashEmitter', message = 'Connected %s: %s' % (splashParticleName, emitter[1]), verbose = False)
for each in splashParticleName:
_connect_NParticleShape_to_NParticleEmitter(particleShapeNode = each, emitter = emitter[1])
## Now do the expression for the side emitter
if 'IntersectCurveRight' in emitter[1]:
direction = 'R'
else:
direction = 'L'
expStringList = [
'float $minSpeed = %s.minSpeed;\n' % sideAnimatable,
'float $maxSpeed = %s.maxSpeed;\n' % sideAnimatable,
'float $speed = %s:world_ctrl.speed;\n' % boatName,
'float $curve = smoothstep($minSpeed, $maxSpeed, $speed);\n',
'float $rateMuliplier = %s.rateMultiplier%s;\n' %(sideAnimatable, direction),
'float $splashMaxSpeed = %s.splashMaxSpeed%s;\n' %(sideAnimatable, direction),
'\n',
'if (%s.useSpeed == 1)\n' % sideAnimatable,
'{\n\t',
'%s.rate = $rateMuliplier * $curve;\n' % emitter[1],
'\n\t\t',
'float $emitterSpeed = $splashMaxSpeed * $curve;\n\t\t',
'if ($emitterSpeed == 0)\n\t\t',
'{\n\t\t\t',
'$emitterSpeed = 0.1;\n\t\t',
'}\n\t\t',
'%s.speed = $emitterSpeed;\n' % emitter[1],
'}\n',
'else\n',
'{\n\t',
'%s.rate = $rateMuliplier;\n\t' % emitter[1],
'%s.speed = $splashMaxSpeed;\n' % emitter[1],
'}\n',
]
## Check if the expression already exists in the scene, if so delete it
utils.checkExpressionExists('%s_sideSplashEmitter' % boatName)
## Build new expression
cmds.expression(emitter[1], n = '%s_sideSplashEmitter' % emitter[1], string = utils.processExpressionString(expStringList))
## Connect some attributes
if not cmds.isConnected('%s.normalSpeed%s' %(sideAnimatable, direction), '%s.normalSpeed' % emitter[1]):
cmds.connectAttr('%s.normalSpeed%s' %(sideAnimatable, direction), '%s.normalSpeed' % emitter[1])
if not cmds.isConnected('%s.randomSpeed%s' %(sideAnimatable, direction), '%s.speedRandom' % emitter[1]):
cmds.connectAttr('%s.randomSpeed%s' %(sideAnimatable, direction), '%s.speedRandom' % emitter[1])
return cPoS
def create_basic(length=10.0,width=0.5,mainCtrls=4,subCtrls=10,surface=True,curve=False,prefix=''): ''' Create a basic ribbon rig with a single base control @param length: Ribbon length @type length: float @param width: Ribbon width @type width: float @param mainCtrls: Number of main ribbon controls @type mainCtrls: int @param subCtrls: Number of ribbon sub controls @type subCtrls: int @param surface: Output ribbon surface @type surface: bool @param curve: Output ribbon curve @type curve: bool @param prefix: Name prefix for created nodes @type prefix: str ''' # Check prefix if not prefix: prefix = 'ribbon' # ----------------- # - Create Groups - # ----------------- ctrl_grp = mc.group(em=True,n=prefix+'_ctrl_grp') hist_grp = mc.group(em=True,n=prefix+'_hist_grp') out_grp = mc.group(em=True,n=prefix+'_out_grp') rig_grp = mc.group([ctrl_grp,hist_grp,out_grp],n=prefix+'_grp') mc.setAttr(hist_grp+'.v',0) # ---------------------- # - Create Base Ribbon - # ---------------------- base_pts = [] base_inc = length / (mainCtrls-1) for i in range(mainCtrls): base_pts.append([width*.5,base_inc*i,0.0]) # Curve 0 base_crv_0 = mc.curve(d=1,p=base_pts,k=range(len(base_pts)),n=prefix+'_base0_crv') mc.rebuildCurve(base_crv_0,ch=0,rpo=1,rt=0,end=1,kr=0,kcp=1,kep=1,kt=1,s=0,d=3,tol=0) base_crv_0_locs = glTools.utils.curve.locatorCurve(base_crv_0,prefix=prefix+'_base0') glTools.utils.shape.createIntermediate(base_crv_0) mc.rebuildCurve(base_crv_0,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=(mainCtrls-1),d=3,tol=0) # Flip CV array base_pts = [(-i[0],i[1],i[2]) for i in base_pts] # Curve 1 base_crv_1 = mc.curve(d=1,p=base_pts,k=range(len(base_pts)),n=prefix+'_base1_crv') mc.rebuildCurve(base_crv_1,ch=0,rpo=1,rt=0,end=1,kr=0,kcp=1,kep=1,kt=1,s=0,d=3,tol=0) base_crv_1_locs = glTools.utils.curve.locatorCurve(base_crv_1,prefix=prefix+'_base1') glTools.utils.shape.createIntermediate(base_crv_1) mc.rebuildCurve(base_crv_1,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=(mainCtrls-1),d=3,tol=0) # Loft base_loft = mc.loft([base_crv_0,base_crv_1],d=1,n=prefix+'_base_surface') base_surface = base_loft[0] base_loft = mc.rename(base_loft[1],prefix+'_base_loft') # Rebuild base_rebuild = mc.rebuildSurface(base_surface,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=1,kc=1,su=0,du=0,sv=0,dv=0,tol=0,fr=0,dir=2,n=prefix+'_base_rebuildSurface') mc.parent([base_crv_0,base_crv_1,base_surface],hist_grp) # ----------------------- # - Create Base Control - # ----------------------- ctrlBuilder = glTools.tools.controlBuilder.ControlBuilder() mc.select(cl=True) base_jnt = mc.joint(n=prefix+'_base_jnt',radius=0.0) base_grp = mc.group(base_jnt,n=prefix+'_base_grp') mc.parent(base_grp,ctrl_grp) ctrlBuilder.controlShape(base_jnt,'circle',rotate=(90,0,0),scale=0.2*length) # ------------------------ # - Create Main Controls - # ------------------------ main_ctrl_list = [] main_grp_list = [] main_ctrl_grp = mc.group(em=True,n=prefix+'_mainCtrl_grp') for i in range(mainCtrls): # Clear selection mc.select(cl=True) # Create main control joint index = glTools.utils.stringUtils.alphaIndex(int(math.floor(i)),True) jnt = mc.joint(n=prefix+'_main'+index+'_jnt',radius=0.0) grp = mc.group(jnt,n=prefix+'_main'+index+'_grp') ctrlBuilder.controlShape(jnt,'square',rotate=(90,0,0),scale=0.125*length) # Position main control joint locs = [base_crv_0_locs[i],base_crv_1_locs[i]] mc.delete( mc.pointConstraint(locs,grp) ) mc.parent(locs,jnt) mc.makeIdentity(locs,apply=True,t=1,r=1,s=1,n=0) for loc in locs: mc.setAttr(loc+'.v',0) # Append list main_ctrl_list.append(jnt) main_grp_list.append(grp) mc.parent(main_grp_list,main_ctrl_grp) mc.parent(main_ctrl_grp,base_jnt) # ---------------------- # - Build Sub Controls - # ---------------------- sub_ctrl_list = [] sub_grp_list = [] sub_ctrl_grp = mc.group(em=True,n=prefix+'_subCtrl_grp') sub_inc = length / (subCtrls - 1) for i in range(subCtrls): # Clear selection mc.select(cl=True) # Create sub control joint index = glTools.utils.stringUtils.alphaIndex(i,True) sub_jnt = mc.joint(n=prefix+'_sub'+index+'_jnt',radius=0.0) sub_grp = mc.group(sub_jnt,n=prefix+'_sub'+index+'_grp') ctrlBuilder.controlShape(sub_jnt,'box',scale=0.025*length) # Position and attach sub controls mc.setAttr(sub_grp+'.t',0.0,(sub_inc*i),0.0) glTools.utils.attach.attachToSurface(base_surface,sub_grp,uValue=0.0,vValue=0.0,useClosestPoint=True,orient=True,uAxis='y',vAxis='x',uAttr='uCoord',vAttr='vCoord',alignTo='v',prefix=prefix+'_sub'+index) # Connect scale mc.connectAttr(base_jnt+'.scale',sub_grp+'.scale') # Append list sub_ctrl_list.append(sub_jnt) sub_grp_list.append(sub_grp) mc.parent(sub_grp_list,sub_ctrl_grp) mc.parent(sub_ctrl_grp,ctrl_grp) # ---------------- # - Build Output - # ---------------- # Build point array sub_inc = length / (subCtrls - 1) pts = [[0,(sub_inc*i),0] for i in range(subCtrls)] # ----- # Curve if curve: # Build curve ribbon_crv = mc.curve(d=1,p=pts,n=prefix+'_ribbon_curve') mc.rebuildCurve(ribbon_crv,ch=0,rpo=1,rt=0,end=1,kr=0,kcp=1,kep=1,kt=1,s=0,d=3,tol=0) # Create curve locators crv_locs = glTools.utils.curve.locatorCurve(ribbon_crv,prefix=prefix) glTools.utils.shape.createIntermediate(ribbon_crv) # Rebuild ribbon curve mc.rebuildCurve(ribbon_crv,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=(subCtrls-1),d=3,tol=0,n=prefix+'_ribbon_rebuildCurve') # Parent curve locators for i in range(len(crv_locs)): mc.parent(crv_locs[i],sub_ctrl_list[i]) mc.setAttr(crv_locs[i]+'.v',0) mc.parent(ribbon_crv,out_grp) # ----------- # - Surface - if surface: # Offset CV array pts = [(width*.5,i[1],i[2]) for i in pts] # Sub Curve 0 sub_crv_0 = mc.curve(d=1,p=pts,k=range(len(pts)),n=prefix+'_sub0_crv') mc.rebuildCurve(sub_crv_0,ch=0,rpo=1,rt=0,end=1,kr=0,kcp=1,kep=1,kt=1,s=0,d=3,tol=0) sub_crv_0_locs = glTools.utils.curve.locatorCurve(sub_crv_0,prefix=prefix+'_sub0') glTools.utils.shape.createIntermediate(sub_crv_0) mc.rebuildCurve(sub_crv_0,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=(subCtrls-1),d=3,tol=0,n=prefix+'_sub0_rebuildCurve') # Flip CV array pts = [(-i[0],i[1],i[2]) for i in pts] # Curve 1 sub_crv_1 = mc.curve(d=1,p=pts,k=range(len(pts)),n=prefix+'_sub1_crv') mc.rebuildCurve(sub_crv_1,ch=0,rpo=1,rt=0,end=1,kr=0,kcp=1,kep=1,kt=1,s=0,d=3,tol=0) sub_crv_1_locs = glTools.utils.curve.locatorCurve(sub_crv_1,prefix=prefix+'_sub1') glTools.utils.shape.createIntermediate(sub_crv_1) mc.rebuildCurve(sub_crv_1,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=(subCtrls-1),d=3,tol=0,n=prefix+'_sub1_rebuildCurve') # Loft ribbon_loft = mc.loft([sub_crv_0,sub_crv_1],d=1,n=prefix+'_ribbon_surface') ribbon_surface = ribbon_loft[0] ribbon_loft = mc.rename(ribbon_loft[1],prefix+'_ribbon_loft') # Parent curve locators for i in range(len(pts)): locs = [sub_crv_0_locs[i],sub_crv_1_locs[i]] mc.parent(locs,sub_ctrl_list[i]) mc.makeIdentity(locs,apply=True,t=1,r=1,s=1,n=0) for loc in locs: mc.setAttr(loc+'.v',0) mc.parent([sub_crv_0,sub_crv_1],hist_grp) mc.parent(ribbon_surface,out_grp)
def create(length=10.0,width=0.5,mainCtrls=4,subCtrls=10,surface=True,curve=False,prefix=''): ''' Create a ribbon rig with a primary base and tip controls @param length: Ribbon length @type length: float @param width: Ribbon width @type width: float @param mainCtrls: Number of main ribbon controls @type mainCtrls: int @param subCtrls: Number of ribbon sub controls @type subCtrls: int @param surface: Output ribbon surface @type surface: bool @param curve: Output ribbon curve @type curve: bool @param prefix: Name prefix for created nodes @type prefix: str ''' # Check prefix if not prefix: prefix = 'ribbon' # ----------------- # - Create Groups - # ----------------- ctrl_grp = mc.group(em=True,n=prefix+'_ctrl_grp') hist_grp = mc.group(em=True,n=prefix+'_hist_grp') out_grp = mc.group(em=True,n=prefix+'_out_grp') rig_grp = mc.group([ctrl_grp,hist_grp,out_grp],n=prefix+'_grp') mc.setAttr(hist_grp+'.v',0) # ---------------------- # - Create Base Ribbon - # ---------------------- # Generate point array base_inc = float(length) / (mainCtrls-1) base_pts = [(width*.5,base_inc*i,0.0) for i in range(mainCtrls)] # Curve 0 base_crv_0 = mc.curve(d=1,p=base_pts,k=range(len(base_pts)),n=prefix+'_base0_crv') mc.rebuildCurve(base_crv_0,ch=0,rpo=1,rt=0,end=1,kr=0,kcp=1,kep=1,kt=1,s=0,d=3,tol=0) base_crv_0_locs = glTools.utils.curve.locatorCurve(base_crv_0,prefix=prefix+'_base0') glTools.utils.shape.createIntermediate(base_crv_0) mc.rebuildCurve(base_crv_0,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=(mainCtrls-1),d=3,tol=0) # Flip CV array base_pts = [(-i[0],i[1],i[2]) for i in base_pts] # Curve 1 base_crv_1 = mc.curve(d=1,p=base_pts,k=range(len(base_pts)),n=prefix+'_base1_crv') mc.rebuildCurve(base_crv_1,ch=0,rpo=1,rt=0,end=1,kr=0,kcp=1,kep=1,kt=1,s=0,d=3,tol=0) base_crv_1_locs = glTools.utils.curve.locatorCurve(base_crv_1,prefix=prefix+'_base1') glTools.utils.shape.createIntermediate(base_crv_1) mc.rebuildCurve(base_crv_1,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=(mainCtrls-1),d=3,tol=0) # Loft base_loft = mc.loft([base_crv_0,base_crv_1],d=1,n=prefix+'_base_surface') base_surface = base_loft[0] base_loft = mc.rename(base_loft[1],prefix+'_base_loft') # Rebuild base_rebuild = mc.rebuildSurface(base_surface,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=1,kc=1,su=0,du=0,sv=0,dv=0,tol=0,fr=0,dir=2,n=prefix+'_base_rebuildSurface') mc.parent([base_crv_0,base_crv_1,base_surface],hist_grp) # ------------------------------- # - Create Base and Tip Control - # ------------------------------- # Base Control mc.select(cl=True) base_jnt = mc.joint(n=prefix+'_baseA_jnt',radius=0.0) base_grp = mc.group(base_jnt,n=prefix+'_baseA_grp') mc.parent(base_grp,ctrl_grp) ctrlBuilder.controlShape(base_jnt,'circle',rotate=(90,0,0),scale=0.2*length) # Tip Control mc.select(cl=True) tip_jnt = mc.joint(n=prefix+'_tipA_jnt',radius=0.0) tip_grp = mc.group(tip_jnt,n=prefix+'_tipA_grp') mc.parent(tip_grp,ctrl_grp) # Position Tip mc.move(0,length,0,tip_grp,ws=True,a=True) ctrlBuilder.controlShape(tip_jnt,'circle',rotate=(90,0,0),scale=0.2*length) # ------------------------ # - Create Main Controls - # ------------------------ # Check mid control mid = False if (float(mainCtrls)/2) % 1: mid = True # Determine mid point if mid: split = int(math.ceil(float(mainCtrls)/2))-1 else : split = int(mainCtrls/2) # Create controls for i in range(mainCtrls): # Clear selection mc.select(cl=True) # Create main control joint index = glTools.utils.stringUtils.alphaIndex(int(math.floor(i)),True) jnt = mc.joint(n=prefix+'_main'+index+'_jnt',radius=0.0) grp = mc.group(jnt,n=prefix+'_main'+index+'_grp') ctrlBuilder.controlShape(jnt,'square',rotate=(90,0,0),scale=0.125*length) # Position main control joint locs = [base_crv_0_locs[i],base_crv_1_locs[i]] mc.delete( mc.pointConstraint(locs,grp) ) mc.parent(locs,jnt) mc.makeIdentity(locs,apply=True,t=1,r=1,s=1,n=0) for loc in locs: mc.setAttr(loc+'.v',0) # Constrain to base/tip control connBlend = glTools.utils.constraint.blendConstraint([base_jnt,tip_jnt],grp,jnt,blendAttr='bias',maintainOffset=True,prefix='') # Set constraint weights if mid and i == split: mc.setAttr(connBlend,0.5) else: if i < split: mc.setAttr(connBlend,0.0) else: mc.setAttr(connBlend,1.0) # Parent to main control group mc.parent(grp,ctrl_grp) # ---------------------- # - Build Sub Controls - # ---------------------- sub_ctrl_list = [] sub_grp_list = [] sub_ctrl_grp = mc.group(em=True,n=prefix+'_subCtrl_grp') # Turn off inheritTransform mc.setAttr(sub_ctrl_grp+'.inheritsTransform',0) # Build point array sub_inc = float(length) / (subCtrls - 1) pts = [[0,(sub_inc*i),0] for i in range(subCtrls)] for i in range(subCtrls): # Clear selection mc.select(cl=True) # Create sub control joint index = glTools.utils.stringUtils.alphaIndex(i,True) sub_jnt = mc.joint(n=prefix+'_sub'+index+'_jnt',radius=0.0) sub_grp = mc.group(sub_jnt,n=prefix+'_sub'+index+'_grp') ctrlBuilder.controlShape(sub_jnt,'box',scale=0.025*length) # Position and attach sub controls mc.setAttr(sub_grp+'.t',pts[i][0],pts[i][1],pts[i][2]) glTools.utils.attach.attachToSurface(base_surface,sub_grp,uValue=0.0,vValue=0.0,useClosestPoint=True,orient=True,uAxis='-x',vAxis='y',uAttr='uCoord',vAttr='vCoord',alignTo='v',prefix=prefix+'_sub'+index) # Append list sub_ctrl_list.append(sub_jnt) sub_grp_list.append(sub_grp) mc.parent(sub_grp_list,sub_ctrl_grp) mc.parent(sub_ctrl_grp,ctrl_grp) # ---------------- # - Build Output - # ---------------- # ----- # Curve if curve: # Build curve ribbon_crv = mc.curve(d=1,p=pts,n=prefix+'_ribbon_curve') mc.rebuildCurve(ribbon_crv,ch=0,rpo=1,rt=0,end=1,kr=0,kcp=1,kep=1,kt=1,s=0,d=3,tol=0) # Create curve locators crv_locs = glTools.utils.curve.locatorCurve(ribbon_crv,prefix=prefix) glTools.utils.shape.createIntermediate(ribbon_crv) # Rebuild ribbon curve mc.rebuildCurve(ribbon_crv,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=(subCtrls-1),d=3,tol=0,n=prefix+'_ribbon_rebuildCurve') # Parent curve locators for i in range(len(crv_locs)): mc.parent(crv_locs[i],sub_ctrl_list[i]) mc.setAttr(crv_locs[i]+'.v',0) mc.parent(ribbon_crv,out_grp) # ----------- # - Surface - if surface: # Offset CV array pts = [(width*.5,i[1],i[2]) for i in pts] # Sub Curve 0 sub_crv_0 = mc.curve(d=1,p=pts,k=range(len(pts)),n=prefix+'_sub0_crv') mc.rebuildCurve(sub_crv_0,ch=0,rpo=1,rt=0,end=1,kr=0,kcp=1,kep=1,kt=1,s=0,d=3,tol=0) sub_crv_0_locs = glTools.utils.curve.locatorCurve(sub_crv_0,prefix=prefix+'_sub0') glTools.utils.shape.createIntermediate(sub_crv_0) mc.rebuildCurve(sub_crv_0,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=(subCtrls-1),d=3,tol=0,n=prefix+'_sub0_rebuildCurve') # Flip CV array pts = [(-i[0],i[1],i[2]) for i in pts] # Curve 1 sub_crv_1 = mc.curve(d=1,p=pts,k=range(len(pts)),n=prefix+'_sub1_crv') mc.rebuildCurve(sub_crv_1,ch=0,rpo=1,rt=0,end=1,kr=0,kcp=1,kep=1,kt=1,s=0,d=3,tol=0) sub_crv_1_locs = glTools.utils.curve.locatorCurve(sub_crv_1,prefix=prefix+'_sub1') glTools.utils.shape.createIntermediate(sub_crv_1) mc.rebuildCurve(sub_crv_1,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=(subCtrls-1),d=3,tol=0,n=prefix+'_sub1_rebuildCurve') # Loft ribbon_loft = mc.loft([sub_crv_0,sub_crv_1],d=1,n=prefix+'_ribbon_surface') ribbon_surface = ribbon_loft[0] ribbon_loft = mc.rename(ribbon_loft[1],prefix+'_ribbon_loft') # Parent curve locators for i in range(len(pts)): locs = [sub_crv_0_locs[i],sub_crv_1_locs[i]] mc.parent(locs,sub_ctrl_list[i]) mc.makeIdentity(locs,apply=True,t=1,r=1,s=1,n=0) for loc in locs: mc.setAttr(loc+'.v',0) mc.parent([sub_crv_0,sub_crv_1],hist_grp) mc.parent(ribbon_surface,out_grp)
def spine_ribbon(ptList,spans=0,joints=6,prefix='cn_spine'):
'''
'''
# ==========
# - Checks -
# ==========
if not ptList: raise Exception('Invalid point list!')
if not prefix: prefix = 'cn_spine'
# ========================
# - Build Spine Locators -
# ========================
pointList = [glTools.utils.base.getPosition(pt) for pt in ptList]
locList = []
lfLocList = []
rtLocList = []
for pt in range(len(pointList)):
strInd = glTools.utils.stringUtils.alphaIndex(pt)
loc = mc.spaceLocator(p=(0,0,0),n=prefix+strInd+'_loc')[0]
lfLoc = mc.spaceLocator(p=(0.5,0,0),n=prefix+strInd+'_loc')[0]
rtLoc = mc.spaceLocator(p=(-0.5,0,0),n=prefix+strInd+'_loc')[0]
mc.parent([lfLoc,rtLoc],loc)
mc.move(pointList[pt][0],pointList[pt][1],pointList[pt][2],loc,ws=True,a=True)
locList.append(loc)
lfLocList.append(lfLoc)
rtLocList.append(rtLoc)
# ===========================
# - Build Spine Loft Curves -
# ===========================
# Build Curves
lfCurve = glTools.utils.curve.createFromLocators(lfLocList,degree=1,attach=True,prefix=prefix+'A')
rtCurve = glTools.utils.curve.createFromLocators(rtLocList,degree=1,attach=True,prefix=prefix+'B')
# Get Curve Shapes
lfCurveShape = mc.listRelatives(lfCurve,s=True,pa=True)[0]
rtCurveShape = mc.listRelatives(rtCurve,s=True,pa=True)[0]
glTools.utils.shape.createIntermediate(lfCurveShape)
glTools.utils.shape.createIntermediate(rtCurveShape)
# Rebuild Curves
if not spans: spans = len(ptList) - 1
lfRebuildCrv = mc.rebuildCurve(lfCurve,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=spans,d=3,tol=0)
rtRebuildCrv = mc.rebuildCurve(rtCurve,ch=1,rpo=1,rt=0,end=1,kr=0,kcp=0,kep=1,kt=1,s=spans,d=3,tol=0)
lfRebuildCrv = mc.rename(lfRebuildCrv[1],prefix+'A_rebuildCurve')
rtRebuildCrv = mc.rename(rtRebuildCrv[1],prefix+'B_rebuildCurve')
# =========================
# - Generate Loft Surface -
# =========================
loft = mc.loft([lfCurve,rtCurve],d=1,n=prefix+'_surface')
loftSurface = loft[0]
loftNode = mc.rename(loft[1],prefix+'_loft')
# ============================
# - Create and Attach Joints -
# ============================
jointList = []
inc = 1.0 / (joints - 1)
for i in range(joints):
mc.select(cl=1)
strInd = glTools.utils.stringUtils.alphaIndex(i)
joint = mc.joint(n=prefix+strInd+'_jnt')
glTools.utils.attach.attachToSurface(loftSurface,joint,uValue=.5,vValue=inc*i,orient=True,uAxis='y',vAxis='x',uAttr='uCoord',vAttr='vCoord',alignTo='v',prefix=prefix+strInd)
jointList.append(joint)
# ===========
# - Cleanup -
# ===========
jntGrp = mc.group(jointList,n=prefix+'_jnt_grp')
rigGrp = mc.group([lfCurve,rtCurve,loftSurface],n=prefix+'_rig_grp')
locGrp = mc.group(locList,n=prefix+'_loc_grp')
# =================
# - Return Result -
# =================
return [jntGrp,rigGrp,locGrp]
def createChalkLine(projectName, objectName,surfaceName):
#Initializing Variables
nodeName = cmds.createNode('pfxToon', name = '%s_PaintFXToon'%projectName)
mesh = objectName
myPlane = surfaceName
#PaintFXToon setting
cmds.setAttr('%s.profileLines' % nodeName, False)
cmds.setAttr('%s.borderLines' % nodeName, False)
cmds.setAttr('%s.creaseLines' % nodeName, False)
cmds.setAttr('%s.intersectionLines' % nodeName, True)
cmds.setAttr('%s.resampleIntersection' % nodeName, True)
cmds.setAttr('%s.displayPercent' % nodeName, 100)
#Connecting mesh to PaintFXToon
cmds.connectAttr("%s.outMesh"%mesh,"%s.inputSurface[0].surface"%nodeName)
cmds.connectAttr("%s.worldMatrix[0]"%mesh,"%s.inputSurface[0].inputWorldMatrix"%nodeName)
#Create NurbsTessellate and Connecting it to NurbSurface
apple = cmds.createNode("nurbsTessellate", name="%s_nurbsTessellate"%projectName)
cmds.connectAttr("%s.chordHeight"%myPlane,"%s.chordHeight"%apple)
cmds.connectAttr("%s.chordHeightRatio"%myPlane,"%s.chordHeightRatio"%apple)
cmds.connectAttr("%s.curvatureTolerance"%myPlane,"%s.curvatureTolerance"%apple)
cmds.connectAttr("%s.edgeSwap"%myPlane,"%s.edgeSwap"%apple)
cmds.connectAttr("%s.explicitTessellationAttributes"%myPlane,"%s.explicitTessellationAttributes"%apple)
cmds.connectAttr("%s.local"%myPlane,"%s.inputSurface"%apple)
cmds.connectAttr("%s.modeU"%myPlane,"%s.uType"%apple)
cmds.connectAttr("%s.modeV"%myPlane,"%s.vType"%apple)
cmds.connectAttr("%s.numberU"%myPlane,"%s.uNumber"%apple)
cmds.connectAttr("%s.numberV"%myPlane,"%s.vNumber"%apple)
cmds.connectAttr("%s.smoothEdge"%myPlane,"%s.smoothEdge"%apple)
cmds.connectAttr("%s.smoothEdgeRatio"%myPlane,"%s.smoothEdgeRatio"%apple)
cmds.connectAttr("%s.uDivisionsFactor"%myPlane,"%s.uDivisionsFactor"%apple)
cmds.connectAttr("%s.useChordHeight"%myPlane,"%s.useChordHeight"%apple)
cmds.connectAttr("%s.useChordHeightRatio"%myPlane,"%s.useChordHeightRatio"%apple)
cmds.connectAttr("%s.vDivisionsFactor"%myPlane,"%s.vDivisionsFactor"%apple)
#Connecting NurbsTessellate and NurbSurface to PaintFXToon
cmds.connectAttr("%s.outputPolygon"%apple,"%s.inputSurface[1].surface"%nodeName)
cmds.connectAttr("%s.worldMatrix[0]"%myPlane,"%s.inputSurface[1].inputWorldMatrix"%nodeName)
#Creating Curve and connecting it to PaintFXToon
mainOffSet = cmds.createNode("offsetCurve",name="%s_main_offsetCurve"%projectName)
topOffSet = cmds.createNode("offsetCurve",name="%s_top_offsetCurve"%projectName)
midOffSet = cmds.createNode("offsetCurve",name="%s_mid_offsetCurve"%projectName)
bottomOffSet = cmds.createNode("offsetCurve",name="%s_buttom_offsetCurve"%projectName)
cmds.setAttr("%s.distance"%mainOffSet, 0)
cmds.setAttr("%s.useGivenNormal"%mainOffSet, 0)
cmds.setAttr("%s.subdivisionDensity"%mainOffSet, 10)
cmds.setAttr("%s.tolerance"%mainOffSet, 0.5)
cmds.setAttr("%s.distance"%topOffSet, 0)
cmds.setAttr("%s.useGivenNormal"%topOffSet, 0)
cmds.setAttr("%s.subdivisionDensity"%topOffSet, 10)
cmds.setAttr("%s.tolerance"%topOffSet, 0.5)
cmds.setAttr("%s.distance"%midOffSet, -0.1)
cmds.setAttr("%s.useGivenNormal"%midOffSet, 0)
cmds.setAttr("%s.subdivisionDensity"%midOffSet, 10)
cmds.setAttr("%s.tolerance"%midOffSet, 0.5)
cmds.setAttr("%s.distance"%bottomOffSet, 0)
cmds.setAttr("%s.useGivenNormal"%bottomOffSet, 0)
cmds.setAttr("%s.subdivisionDensity"%bottomOffSet, 10)
cmds.setAttr("%s.tolerance"%bottomOffSet, 0.5)
cmds.connectAttr("%s.outMainCurves[0]"%nodeName,"%s.inputCurve"%mainOffSet)
cmds.connectAttr("%s.outputCurve[0]"%mainOffSet,"%s.inputCurve"%topOffSet)
cmds.connectAttr("%s.outputCurve[0]"%mainOffSet,"%s.inputCurve"%midOffSet)
cmds.connectAttr("%s.outputCurve[0]"%mainOffSet,"%s.inputCurve"%bottomOffSet)
cmds.setAttr("%s.displayPercent"%nodeName, 0)
#Creating 3 Curve
chalkLine1 = cmds.circle(nr=(0, 1, 0), c=(0, 0, 0), r=1,name="%s_Bottom"%projectName)
chalkLine2 = cmds.circle(nr=(0, 1, 0), c=(0, 0, 0), r=1,name="%s_Mid"%projectName)
chalkLine3 = cmds.circle(nr=(0, 1, 0), c=(0, 0, 0), r=1,name="%s_Top"%projectName)
curveGroups =cmds.group(chalkLine1[0],chalkLine2[0],chalkLine3[0],name="%s_CurvesList"%projectName)
cmds.group(curveGroups, name="%s_CurvesControl"%projectName)
# cmds.xform(chalkLine1[0],cp=True)
# cmds.xform(chalkLine2[0],cp=True)
# cmds.xform(chalkLine3[0],cp=True)
cmds.move(0.2,chalkLine2[0],moveY=True)
cmds.move(0.3,chalkLine3[0],moveY=True)
# cmds.scale(1.2,1.2,1.2,chalkLine2[0],scaleXYZ=True)
cmds.delete(chalkLine1[0],constructionHistory=True)
cmds.delete(chalkLine2[0],constructionHistory=True)
cmds.delete(chalkLine3[0],constructionHistory=True)
cmds.connectAttr("%s.outputCurve[0]"%topOffSet,"%sShape.create"%chalkLine3[0])
cmds.connectAttr("%s.outputCurve[0]"%midOffSet,"%sShape.create"%chalkLine2[0])
cmds.connectAttr("%s.outputCurve[0]"%bottomOffSet,"%sShape.create"%chalkLine1[0])
objectLoft = cmds.loft(chalkLine3[0], chalkLine2[0], chalkLine1[0],name="%s_Loft"%projectName, constructionHistory=True, uniform=True,
close=False, autoReverse=True, d=3, sectionSpans=1, range=False, polygon=0,rsn=True)
return objectLoft, [chalkLine1[0],chalkLine2[0],chalkLine3[0]],[mainOffSet,topOffSet,midOffSet,bottomOffSet]
def createNrb():
#Get all name from UI#
nameObj = mc.textField( Name , q = True , tx = True )
sideObj = mc.textField( Side , q = True , tx = True )
ParentObj1 = mc.textField( Parent1 , q = True, tx = True )
ParentObj2 = mc.textField( Parent2 , q = True, tx = True )
# Create Locator #
baseLoc = mc.spaceLocator(p=(0, 0, 0), n = ( nameObj + 'Base'+ sideObj +'_loc' ))[0]
tipLoc = mc.spaceLocator(p=(0, 0, 0), n = ( nameObj + 'Tip'+ sideObj +'_loc' ))[0]
midLoc = mc.spaceLocator(p=(0, 0, 0), n = ( nameObj + 'Mid'+ sideObj +'_loc' ))[0]
mc.setAttr((tipLoc + '.ty') , 5)
mc.setAttr((midLoc + '.ty') , 2.5)
# Get Position Attr #
posBaseLoc = mc.xform(baseLoc,q=True,ws=True,rp=True)
posTipLoc = mc.xform(tipLoc,q=True,ws=True,rp=True)
# get position for arcLen #
if len(ParentObj1) > 0 :
arcLenCurve1 = mc.xform(ParentObj1,q=True,ws=True,rp=True)
arcLenCurve2 = mc.xform(ParentObj2,q=True,ws=True,rp=True)
elif len(ParentObj1) == 0 :
arcLenCurve1 = posBaseLoc
arcLenCurve2 = posTipLoc
# Create Nurb #
crv1 = mc.curve(d=1,p=(posTipLoc,posBaseLoc),n="rbn1_crv")
mc.rename('curveShape1',crv1+'Shape')
crv2 = mc.curve(d=1,p=(posTipLoc,posBaseLoc),n="rbn2_crv")
mc.rename('curveShape1',crv2+'Shape')
crvGlobal = mc.curve(d=1,p=(arcLenCurve1,arcLenCurve2),n= nameObj + 'rbnGlobal'+ sideObj +'_crv')
mc.rename('curveShape1',crvGlobal+'Shape')
crvMaster = mc.curve(d=1,p=(arcLenCurve1,arcLenCurve1),n=nameObj + 'rbn'+ sideObj +'_crv')
mc.rename('curveShape1',crvMaster+'Shape')
mc.setAttr(crvGlobal+'.v',0)
mc.setAttr(crvMaster+'.v',0)
mc.setAttr(crv1 + ".tx" , 1)
mc.setAttr(crv2 + ".tx" , -1)
RibbonNrb = mc.loft(crv2,crv1,u=True,ch=False,ss=1,rn=False,po=0,rsn=True,n = (nameObj + 'Ribbon'+ sideObj +'_nrb'))[0]
mc.rebuildSurface(RibbonNrb,su=5,sv=0)
mc.setAttr(RibbonNrb+'.visibility',0)
mc.delete(crv1,crv2)
paraU = 0.1
allposi = []
allDetailjnt = []
allDetailGrp = []
for i in range(1,6) :
# Create pointOnSurfaceInfo & Group #
Posi = mc.createNode('pointOnSurfaceInfo' , n = (nameObj + str(i) +'Rbn' + sideObj + '_posi'))
RbnPos = mc.createNode('transform', n = (nameObj + str(i) +'RbnPos' + sideObj + '_grp' ))
mc.connectAttr( RibbonNrb + 'Shape.worldSpace' , Posi + '.inputSurface' )
mc.setAttr(Posi + '.parameterU' , paraU )
mc.setAttr(Posi + '.parameterV' , 0.5 )
mc.select(cl=True)
paraU += 0.2
# Connect pointOnSurfaceInfo to Group #
mc.connectAttr(Posi + '.position' , RbnPos + '.translate')
AimRbnPos = mc.createNode('aimConstraint' , n = (nameObj + str(i) +'RbnPosGrp' + sideObj + '_aimCons'))
mc.parent(AimRbnPos , RbnPos)
mc.setAttr(AimRbnPos + '.t' , 0 , 0 , 0 )
mc.setAttr(AimRbnPos + '.r' , 0 , 0 , 0 )
mc.connectAttr(Posi + '.normal' , AimRbnPos + '.worldUpVector')
mc.connectAttr(Posi + '.tangentU' , AimRbnPos + '.target[0].targetTranslate')
mc.connectAttr(AimRbnPos + '.constraintRotate' , RbnPos + '.rotate' )
mc.setAttr(AimRbnPos + '.upVectorY' , 0)
mc.setAttr(AimRbnPos + '.upVectorZ' , 1)
allposi.append(RbnPos)
mc.select(cl=True)
# create detail joint #
posiPosition = mc.xform(RbnPos,q=True,ws=True,rp=True)
detailJnt = mc.joint(p = posiPosition, n = (nameObj + str(i) + 'Detail' + sideObj + '_jnt'))
#testCube = mc.polyCube(w=.5,h=.5,d=1)
allDetailjnt.append(detailJnt)
#mc.parentConstraint(detailJnt,testCube)
#mc.scaleConstraint(detailJnt,testCube)
mc.select(cl=True)
# create deetail control #
detailCtrlPosi = mc.xform(detailJnt,q=True,ws=True,rp=True)
detailCtrl = mc.curve(d = 1, p =[(-1.25, 0, 0), (-1.004121, 0, 0), (-0.991758, 0, -0.157079), (-0.954976, 0, -0.31029), (-0.894678, 0, -0.455861),(-0.812351, 0, -0.590207), (-0.710021, 0, -0.710021), (-0.590207, 0, -0.812351), (-0.455861, 0, -0.894678), (-0.31029, 0, -0.954976),(-0.157079, 0, -0.991758), (0, 0, -1.004121), (0, 0, -1.25), (0, 0, -1.004121), (0.157079, 0, -0.991758), (0.31029, 0, -0.954976),(0.455861, 0, -0.894678),(0.590207, 0, -0.812351), (0.710021, 0, -0.710021), (0.812351, 0, -0.590207), (0.894678, 0, -0.455861),(0.954976, 0, -0.31029), (0.991758, 0, -0.157079), (1.004121, 0, 0), (1.25, 0, 0), (1.004121, 0, 0), (0.991758, 0, 0.157079), (0.954976, 0, 0.31029), (0.894678, 0, 0.455861), (0.812351, 0, 0.590207), (0.710021, 0, 0.710021), (0.590207, 0, 0.812351), (0.455861, 0, 0.894678), (0.31029, 0, 0.954976),(0.157079, 0, 0.991758),(0, 0, 1.004121), (0, 0, 1.25), (0, 0, 1.004121), (-0.157079, 0, 0.991758), (-0.31029, 0, 0.954976), (-0.455861, 0, 0.894678), (-0.590207, 0, 0.812351), (-0.710021, 0, 0.710021), (-0.812351, 0, 0.590207), (-0.894678, 0, 0.455861), (-0.954976, 0, 0.31029),(-0.991758,0,0.157079),(-1.004121,0,0)], n = (nameObj + str(i) + 'Rbn' + sideObj + '_ctrl'))
mc.rename('curveShape1' , (nameObj + str(i) + 'Rbn' + sideObj + '_ctrlShape'))
mc.addAttr(detailCtrl,ln='squash',at='float',dv=0,k=True)
mc.setAttr(detailCtrl+'.sx', l = True , keyable = False )
mc.setAttr(detailCtrl+'.sy', l = True , keyable = False )
mc.setAttr(detailCtrl+'.sz', l = True , keyable = False )
mc.setAttr(detailCtrl+'.v', l = True , k = False )
mc.setAttr(detailCtrl + 'Shape.overrideEnabled' , 1)
mc.setAttr(detailCtrl + 'Shape.overrideColor' , 18)
detailRotGrp = mc.group(detailCtrl, n = (nameObj + str(i) +'DetailRot' + sideObj + '_grp' ))
detailGrp = mc.group(detailRotGrp, n = (nameObj + str(i) +'DetailCtrlZro' + sideObj + '_grp' ))
mc.parentConstraint(detailJnt,detailGrp)
mc.delete( (nameObj + str(i) + 'DetailCtrlZro' + sideObj + '_grp_parentConstraint1'))
allDetailGrp.append(detailGrp)
mc.select(cl=True)
mc.parentConstraint(RbnPos,detailGrp,mo = True)
mc.parentConstraint(detailCtrl,detailJnt,mo = True)
# Base Control #
baseJnt = mc.joint(n = (nameObj + 'Base' + sideObj + '_jnt'))
baseJntAimGrp = mc.group(n = (nameObj + 'RbnBaseAim' + sideObj + '_grp'))
baseCtrl = mc.curve( d = 1 , p = [(1,0,0),(-1,0,0),(0,0,0),(0,0,-1),(0,0,1),(0,0,0),(0,1,0),(0,-1,0),(0,0,0)] , n = (nameObj + 'Base' + sideObj + '_ctrl'))
mc.rename('curveShape1' , (nameObj + 'Base' + sideObj + '_ctrlShape'))
mc.setAttr(baseCtrl+'.rx', l = True , keyable = False )
mc.setAttr(baseCtrl+'.ry', l = True , keyable = False )
mc.setAttr(baseCtrl+'.rz', l = True , keyable = False )
mc.setAttr(baseCtrl+'.sx', l = True , keyable = False )
mc.setAttr(baseCtrl+'.sy', l = True , keyable = False )
mc.setAttr(baseCtrl+'.sz', l = True , keyable = False )
mc.setAttr(baseCtrl+'.v',0, l = True , k = False )
mc.setAttr(baseCtrl + 'Shape.overrideEnabled' , 1)
mc.setAttr(baseCtrl + 'Shape.overrideColor' , 17)
baseJntZroGrp = mc.group(n = (nameObj + 'RbnBaseZro' + sideObj + '_grp'))
mc.parent(baseJntAimGrp,baseCtrl)
parCon = mc.parentConstraint(baseLoc,baseJntZroGrp)
mc.delete(parCon)
mc.select(cl=True)
# Middle Control #
midJnt = mc.joint(n = (nameObj + 'RbnMid' + sideObj + '_jnt'))
midCtrl = mc.curve( d = 1 , p = [(-1, 0, -1),(-1, 0, 0),(-1.25, 0, 0),(-1, 0, 0),(-1, 0, 1),(0, 0, 1),(0, 0, 1.25),(0, 0, 1),(1, 0, 1),(1, 0, 0),(1.25, 0, 0),(1, 0, 0),(1, 0, -1),(0, 0, -1),(0, 0, -1.25),(0, 0, -1),(-1, 0, -1)] , n = (nameObj + 'RbnMid' + sideObj + '_ctrl'))
midCtrlList = mc.listRelatives(midCtrl, shapes = True)[0]
midCtrlShape = mc.rename(midCtrlList , (nameObj + 'RbnMid' + sideObj + '_ctrlShape'))
mc.setAttr(midCtrl + 'Shape.overrideEnabled' , 1)
mc.setAttr(midCtrl + 'Shape.overrideColor' , 17)
mc.addAttr(midCtrl,ln='autoTwist',at='long',min=0,max=1,dv=0,k=True)
mc.addAttr(midCtrl,ln='rootTwist',at='float',dv=0,k=True)
mc.addAttr(midCtrl,ln='endTwist',at='float',dv=0,k=True)
mc.addAttr(midCtrl,ln='autoSquash',at='long',min=0,max=1,dv=0,k=True)
mc.addAttr(midCtrl,ln='squash',at='float',dv=0,k=True)
mc.addAttr(midCtrlShape,ln='detailControl',at='bool',dv=0,k=True)
mc.addAttr(midCtrlShape,ln='rootTwist',at='float',dv=0,k=True)
mc.addAttr(midCtrlShape,ln='endTwist',at='float',dv=0,k=True)
mc.setAttr(midCtrl+'.sx', l = True , keyable = False )
mc.setAttr(midCtrl+'.sy', l = True , keyable = False )
mc.setAttr(midCtrl+'.sz', l = True , keyable = False )
mc.setAttr(midCtrl+'.v',1, l = True , k = False )
midJntAimGrp = mc.group(n = (nameObj + 'RbnMidAim' + sideObj + '_grp'))
midJntZroGrp = mc.group(n = (nameObj + 'RbnMidZro' + sideObj + '_grp'))
mc.parent(midJnt,midCtrl)
parCon = mc.parentConstraint(midLoc,midJntZroGrp)
mc.delete(parCon)
mc.select(cl=True)
# Tip Control #
tipCtrl = mc.curve( d = 1 , p = [(1,0,0),(-1,0,0),(0,0,0),(0,0,-1),(0,0,1),(0,0,0),(0,1,0),(0,-1,0),(0,0,0)] , n = (nameObj + 'Tip' + sideObj + '_ctrl'))
mc.rename('curveShape1' , (nameObj + 'Tip' + sideObj + '_ctrlShape'))
mc.setAttr(tipCtrl+'.rx', l = True , keyable = False )
mc.setAttr(tipCtrl+'.ry', l = True , keyable = False )
mc.setAttr(tipCtrl+'.rz', l = True , keyable = False )
mc.setAttr(tipCtrl+'.sx', l = True , keyable = False )
mc.setAttr(tipCtrl+'.sy', l = True , keyable = False )
mc.setAttr(tipCtrl+'.sz', l = True , keyable = False )
mc.setAttr(tipCtrl+'.v',0, l = True , k = False )
mc.setAttr(tipCtrl + 'Shape.overrideEnabled' , 1)
mc.setAttr(tipCtrl + 'Shape.overrideColor' , 17)
tipJntZroGrp = mc.group(n = (nameObj + 'RbnTipZro' + sideObj + '_grp'))
tipJnt = mc.joint(n = (nameObj + 'Tip' + sideObj + '_jnt') , p = (0,0,0))
tipJntAimGrp = mc.group(n = (nameObj + 'RbnTipAim' + sideObj + '_grp'))
mc.parent(tipJntAimGrp,tipCtrl)
parCon = mc.parentConstraint(tipLoc,tipJntZroGrp)
mc.delete(parCon)
mc.delete(baseLoc,midLoc,tipLoc)
mc.select(cl=True)
# Create Twist #
rbnTwistMdv = mc.createNode('multiplyDivide', n = (nameObj + 'RbnTwist' + sideObj + '_mdv'))
rbnAutoTwistMdv = mc.createNode('multiplyDivide', n = (nameObj + 'RbnAutoTwist' + sideObj + '_mdv'))
rbnAutoTwistPma = mc.createNode('plusMinusAverage', n = (nameObj + 'RbnAutoTwist' + sideObj + '_pma'))
mc.setAttr(rbnAutoTwistMdv+'.input2X',-1)
mc.connectAttr(midCtrl+'.autoTwist',rbnTwistMdv+'.input2Y')
mc.connectAttr(midCtrl+'.autoTwist',rbnTwistMdv+'.input2X')
mc.connectAttr(midCtrl+'Shape.rootTwist',rbnAutoTwistMdv+'.input1X')
mc.connectAttr(midCtrl+'Shape.endTwist',rbnAutoTwistMdv+'.input1Y')
mc.connectAttr(midCtrl+'.rootTwist',rbnAutoTwistPma+'.input3D[0].input3Dx')
mc.connectAttr(midCtrl+'.endTwist',rbnAutoTwistPma+'.input3D[0].input3Dy')
mc.connectAttr(rbnTwistMdv+'.output',rbnAutoTwistPma+'.input3D[1]')
mc.connectAttr(rbnAutoTwistMdv+'.output',rbnTwistMdv+'.input1')
for i in range(1,6) :
detailRotGrp = (nameObj + str(i) +'DetailRot' + sideObj + '_grp' )
rbnTwistMdv = mc.createNode('multiplyDivide', n = (nameObj + str(i) + 'DetailTwist' + sideObj + '_mdv'))
rbnTwistPma = mc.createNode('plusMinusAverage', n = (nameObj + str(i) + 'DetailTwist' + sideObj + '_pma'))
mc.setAttr(rbnTwistMdv+'.input2Y',(0.25*(i-1)))
mc.setAttr(rbnTwistMdv+'.input2X',(1-(0.25*(i-1))))
mc.connectAttr(rbnAutoTwistPma+'.output3Dx',rbnTwistMdv+'.input1.input1Y')
mc.connectAttr(rbnAutoTwistPma+'.output3Dy',rbnTwistMdv+'.input1.input1X')
mc.connectAttr(rbnTwistMdv+'.output.outputX',rbnTwistPma+'.input2D[0].input2Dx')
mc.connectAttr(rbnTwistMdv+'.output.outputY',rbnTwistPma+'.input2D[1].input2Dx')
mc.connectAttr(rbnTwistPma+'.output2D.output2Dx',detailRotGrp+'.rotate.rotateY')
if len(ParentObj1) > 0 :
mc.connectAttr(ParentObj1 +'.rotate.rotateY',midCtrl+'Shape.rootTwist')
mc.connectAttr(ParentObj2 +'.rotate.rotateY',midCtrl+'Shape.endTwist')
mc.setAttr(midCtrl+'Shape.rootTwist', l = True )
mc.setAttr(midCtrl+'Shape.endTwist', l = True )
# Create Squash #
cfs = mc.createNode('curveFromSurfaceIso',n = (nameObj + 'Rbn' + sideObj + '_cfs'))
mc.connectAttr(RibbonNrb + 'Shape.worldSpace' ,cfs + '.inputSurface')
mc.setAttr(cfs+'.isoparmValue',0.5)
mc.connectAttr(cfs + '.outputCurve' ,crvMaster + 'Shape.create')
CurveGlobalInfo = mc.arclen(crvGlobal, ch=True )
rbnCurveGlobalInfo = mc.rename(CurveGlobalInfo,(nameObj + 'RbnGlobal' + sideObj + '_cif'))
CurveMasterInfo = mc.arclen(crvMaster, ch=True )
rbnCurveMasterInfo = mc.rename(CurveMasterInfo,(nameObj + 'Rbn' + sideObj + '_cif'))
rbnAutoSquashMdv = mc.createNode('multiplyDivide', n = (nameObj + 'RbnAutoSquash' + sideObj + '_mdv'))
rbnAutoSquashPma = mc.createNode('plusMinusAverage', n = (nameObj + 'RbnAutoSquash' + sideObj + '_pma'))
rbnAutoSquashPowMdv = mc.createNode('multiplyDivide', n = (nameObj + 'RbnAutoSquashPow' + sideObj + '_mdv'))
rbnAutoSquashDivMdv = mc.createNode('multiplyDivide', n = (nameObj + 'RbnAutoSquashDiv' + sideObj + '_mdv'))
rbnAutoSquashGlobalMdv = mc.createNode('multiplyDivide', n = (nameObj + 'RbnAutoSquashGlobal' + sideObj + '_mdv'))
mc.setAttr(rbnAutoSquashPma+'.input2D[1].input2Dx',-1)
mc.setAttr(rbnAutoSquashPma+'.input2D[1].input2Dy',-1)
mc.setAttr(rbnAutoSquashPowMdv+'.input2X',0.5)
mc.setAttr(rbnAutoSquashPowMdv+'.operation',3)
mc.setAttr(rbnAutoSquashDivMdv+'.operation',2)
mc.setAttr(rbnAutoSquashGlobalMdv+'.operation',2)
mc.setAttr(rbnAutoSquashDivMdv+'.input1X',1)
mc.connectAttr(rbnCurveMasterInfo + '.arcLength',rbnAutoSquashGlobalMdv + '.input1X')
mc.connectAttr(rbnCurveGlobalInfo + '.arcLength',rbnAutoSquashGlobalMdv + '.input2X')
mc.connectAttr(rbnAutoSquashGlobalMdv +'.outputX',rbnAutoSquashDivMdv + '.input2X')
mc.connectAttr(rbnAutoSquashDivMdv +'.outputX',rbnAutoSquashPowMdv + '.input1X')
mc.connectAttr(midCtrl +'.autoSquash',rbnAutoSquashMdv + '.input2X')
mc.connectAttr(rbnAutoSquashPma +'.output2Dx',rbnAutoSquashMdv + '.input1X')
mc.connectAttr(rbnAutoSquashPowMdv +'.outputX',rbnAutoSquashPma + '.input2D[0].input2Dx')
amp = 0.3333
for i in range(1,6) :
detailCtrl = (nameObj + str(i) + 'Rbn' + sideObj + '_ctrl')
rbnStSqMdv = mc.createNode('multiplyDivide', n = (nameObj + str(i) + 'RbnCtrlStSq' + sideObj + '_mdv'))
rbnStSqPma = mc.createNode('plusMinusAverage', n = (nameObj + str(i) + 'RbnCtrlStSq' + sideObj + '_pma'))
mc.setAttr(rbnStSqPma+'.input2D[0].input2Dy',1)
mc.connectAttr(detailCtrl +'.squash',rbnStSqMdv + '.input1Y')
mc.connectAttr(rbnStSqMdv +'.outputX',rbnStSqPma + '.input2D[1].input2Dy')
mc.connectAttr(rbnStSqMdv +'.outputY',rbnStSqPma + '.input2D[2].input2Dy')
mc.connectAttr(rbnStSqMdv +'.outputZ',rbnStSqPma + '.input2D[3].input2Dy')
mc.connectAttr(rbnAutoSquashMdv+'.outputX' ,rbnStSqMdv +'.input1X' )
mc.connectAttr(midCtrl+'.squash' ,rbnStSqMdv +'.input1Z' )
detailJnt = (nameObj + str(i) + 'Detail' + sideObj + '_jnt')
mc.connectAttr(rbnStSqPma+'.output2Dy',detailJnt+'.scaleX')
mc.connectAttr(rbnStSqPma+'.output2Dy',detailJnt+'.scaleZ')
if i < 3 :
mc.setAttr(rbnStSqMdv+'.input2X' , amp)
mc.setAttr(rbnStSqMdv+'.input2Z' , amp)
amp += 0.3333
if i > 3 :
amp -= 0.3333
mc.setAttr(rbnStSqMdv+'.input2X' , amp)
mc.setAttr(rbnStSqMdv+'.input2Z' , amp)
mc.aimConstraint(baseJntAimGrp,tipJntAimGrp, wuo = tipJntZroGrp ,aim = [0,-1,0] , u = [0,1,0] , wut = 'objectrotation' , wu = [0,1,0])
mc.aimConstraint(tipJntAimGrp,baseJntAimGrp, wuo = baseJntZroGrp ,aim = [0,1,0] , u = [0,1,0] , wut = 'objectrotation' , wu = [0,1,0])
mc.aimConstraint(tipJntAimGrp,midJntAimGrp, wuo = midJntZroGrp ,aim = [0,1,0] , u = [0,1,0] , wut = 'objectrotation' , wu = [0,1,0])
mc.pointConstraint( baseJnt, tipJnt, midJntZroGrp )
#skin nurb#
NurbsSkin = mc.skinCluster( baseJnt, midJnt, tipJnt , RibbonNrb , dr=16, nw=2 , n = (nameObj + 'RbnNrb' + sideObj + '_skc') , tsb = True)
mc.skinPercent (NurbsSkin[0], (RibbonNrb + '.cv[0][0:3]'), tv = (tipJnt, 1))
mc.skinPercent (NurbsSkin[0], (RibbonNrb + '.cv[1][0:3]'), tv = (midJnt, .13))
mc.skinPercent (NurbsSkin[0], (RibbonNrb + '.cv[2][0:3]'), tv = (midJnt, .4))
mc.skinPercent (NurbsSkin[0], (RibbonNrb + '.cv[3][0:3]'), tv = (midJnt, .8))
mc.skinPercent (NurbsSkin[0], (RibbonNrb + '.cv[4][0:3]'), tv = (midJnt, .8))
mc.skinPercent (NurbsSkin[0], (RibbonNrb + '.cv[5][0:3]'), tv = (midJnt, .4))
mc.skinPercent (NurbsSkin[0], (RibbonNrb + '.cv[6][0:3]'), tv = (midJnt, .13))
mc.skinPercent (NurbsSkin[0], (RibbonNrb + '.cv[7][0:3]'), tv = (baseJnt, 1))
detailZroGrp = mc.group(allDetailGrp , n = (nameObj + 'RbnDetailZro' + sideObj + '_grp'))
mc.select( clear=True )
rbnCtrlGrp = mc.group(detailZroGrp,baseJntZroGrp,midJntZroGrp,tipJntZroGrp,crvGlobal, n = (nameObj + 'RbnCtrl' + sideObj + '_grp'))
mc.select( clear=True )
rbnStillGrp = mc.group(allposi,RibbonNrb ,crvMaster, n = (nameObj + 'RbnStill' + sideObj + '_grp'))
mc.select(cl=True)
rbnSkinGrp = mc.group(allDetailjnt , n = (nameObj + 'RbnSkin' + sideObj + '_grp'))
mc.select(cl=True)
mc.connectAttr(midCtrlShape+'.detailControl',detailZroGrp+'.v')
mc.parentConstraint( rbnCtrlGrp, rbnSkinGrp , mo=0 )
if len(ParentObj1) > 0 :
mc.pointConstraint( ParentObj1, baseJntZroGrp , mo=0 )
mc.pointConstraint( ParentObj2, tipJntZroGrp , mo=0 )
mc.parentConstraint( ParentObj1, rbnCtrlGrp , mo=0 )
def create(surface, spansU=0, spansV=0, prefix=None):
"""
"""
# Load Plugins
loadPlugin()
# ==========
# - Checks -
# ==========
# Check Surface
if not glTools.utils.surface.isSurface(surface):
raise Exception('Object "' + surface + '" is not a valid nurbs surface!')
# Check Prefix
if not prefix:
prefix = glTools.utils.stringUtils.stripSuffix(surface)
# Get Surface Details
if not spansU:
spansU = cmds.getAttr(surface + ".spansU")
if not spansV:
spansV = cmds.getAttr(surface + ".spansV")
minU = cmds.getAttr(surface + ".minValueU")
maxU = cmds.getAttr(surface + ".maxValueU")
minV = cmds.getAttr(surface + ".minValueV")
maxV = cmds.getAttr(surface + ".maxValueV")
incU = (maxU - minU) / spansU
incV = (maxV - minV) / spansV
# =============
# - Rebuild U -
# =============
crvU = []
for i in range(spansU + 1):
# Duplicate Surface Curve
dupCurve = cmds.duplicateCurve(surface + ".u[" + str(incU * i) + "]", ch=True, rn=False, local=False)
dupCurveNode = cmds.rename(dupCurve[1], prefix + "_spanU" + str(i) + "_duplicateCurve")
dupCurve = cmds.rename(dupCurve[0], prefix + "_spanU" + str(i) + "_crv")
crvU.append(dupCurve)
# Set Curve Length
arcLen = cmds.arclen(dupCurve)
setLen = cmds.createNode("setCurveLength", n=prefix + "_spanU" + str(i) + "_setCurveLength")
crvInfo = cmds.createNode("curveInfo", n=prefix + "_spanU" + str(i) + "_curveInfo")
blendLen = cmds.createNode("blendTwoAttr", n=prefix + "_spanU" + str(i) + "length_blendTwoAttr")
cmds.addAttr(dupCurve, ln="targetLength", dv=arcLen, k=True)
cmds.connectAttr(dupCurveNode + ".outputCurve", crvInfo + ".inputCurve", f=True)
cmds.connectAttr(dupCurveNode + ".outputCurve", setLen + ".inputCurve", f=True)
cmds.connectAttr(crvInfo + ".arcLength", blendLen + ".input[0]", f=True)
cmds.connectAttr(dupCurve + ".targetLength", blendLen + ".input[1]", f=True)
cmds.connectAttr(blendLen + ".output", setLen + ".length", f=True)
cmds.connectAttr(setLen + ".outputCurve", dupCurve + ".create", f=True)
# Add Control Attributes
cmds.addAttr(dupCurve, ln="lockLength", min=0, max=1, dv=1, k=True)
cmds.addAttr(dupCurve, ln="lengthBias", min=0, max=1, dv=0, k=True)
cmds.connectAttr(dupCurve + ".lockLength", blendLen + ".attributesBlender", f=True)
cmds.connectAttr(dupCurve + ".lengthBias", setLen + ".bias", f=True)
# Loft New Surface
srfU = cmds.loft(crvU, ch=True, uniform=True, close=False, autoReverse=False, degree=3)
srfUloft = cmds.rename(srfU[1], prefix + "_rebuildU_loft")
srfU = cmds.rename(srfU[0], prefix + "_rebuildU_srf")
# Rebuild 0-1
rebuildSrf = cmds.rebuildSurface(srfU, ch=True, rpo=True, rt=0, end=1, kr=0, kcp=1, su=0, du=3, sv=0, dv=3, tol=0)
rebuildSrfNode = cmds.rename(rebuildSrf[1], prefix + "_rebuildU_rebuildSurface")
# Add Control Attributes
cmds.addAttr(srfU, ln="lockLength", min=0, max=1, dv=1, k=True)
cmds.addAttr(srfU, ln="lengthBias", min=0, max=1, dv=0, k=True)
for crv in crvU:
cmds.connectAttr(srfU + ".lockLength", crv + ".lockLength", f=True)
cmds.connectAttr(srfU + ".lengthBias", crv + ".lengthBias", f=True)
# =============
# - Rebuild V -
# =============
crvV = []
for i in range(spansV + 1):
# Duplicate Surface Curve
dupCurve = cmds.duplicateCurve(srfU + ".v[" + str(incV * i) + "]", ch=True, rn=False, local=False)
dupCurveNode = cmds.rename(dupCurve[1], prefix + "_spanV" + str(i) + "_duplicateCurve")
dupCurve = cmds.rename(dupCurve[0], prefix + "_spanV" + str(i) + "_crv")
crvV.append(dupCurve)
# Set Curve Length
arcLen = cmds.arclen(dupCurve)
setLen = cmds.createNode("setCurveLength", n=prefix + "_spanV" + str(i) + "_setCurveLength")
crvInfo = cmds.createNode("curveInfo", n=prefix + "_spanV" + str(i) + "_curveInfo")
blendLen = cmds.createNode("blendTwoAttr", n=prefix + "_spanV" + str(i) + "length_blendTwoAttr")
cmds.addAttr(dupCurve, ln="targetLength", dv=arcLen, k=True)
cmds.connectAttr(dupCurveNode + ".outputCurve", crvInfo + ".inputCurve", f=True)
cmds.connectAttr(dupCurveNode + ".outputCurve", setLen + ".inputCurve", f=True)
cmds.connectAttr(crvInfo + ".arcLength", blendLen + ".input[0]", f=True)
cmds.connectAttr(dupCurve + ".targetLength", blendLen + ".input[1]", f=True)
cmds.connectAttr(blendLen + ".output", setLen + ".length", f=True)
cmds.connectAttr(setLen + ".outputCurve", dupCurve + ".create", f=True)
# Add Control Attribute
cmds.addAttr(dupCurve, ln="lockLength", min=0, max=1, dv=1, k=True)
cmds.addAttr(dupCurve, ln="lengthBias", min=0, max=1, dv=0, k=True)
cmds.connectAttr(dupCurve + ".lockLength", blendLen + ".attributesBlender", f=True)
cmds.connectAttr(dupCurve + ".lengthBias", setLen + ".bias", f=True)
# Loft New Surface
srfV = cmds.loft(crvV, ch=True, uniform=True, close=False, autoReverse=False, degree=3)
srfVloft = cmds.rename(srfV[1], prefix + "_rebuildV_loft")
srfV = cmds.rename(srfV[0], prefix + "_rebuildV_srf")
# Rebuild 0-1
rebuildSrf = cmds.rebuildSurface(srfV, ch=True, rpo=True, rt=0, end=1, kr=0, kcp=1, su=0, du=3, sv=0, dv=3, tol=0)
rebuildSrfNode = cmds.rename(rebuildSrf[1], prefix + "_rebuildV_rebuildSurface")
# Add Control Attribute
cmds.addAttr(srfV, ln="lockLength", min=0, max=1, dv=1, k=True)
cmds.addAttr(srfV, ln="lengthBias", min=0, max=1, dv=0, k=True)
for crv in crvV:
cmds.connectAttr(srfV + ".lockLength", crv + ".lockLength", f=True)
cmds.connectAttr(srfV + ".lengthBias", crv + ".lengthBias", f=True)
# ===================
# - Build Hierarchy -
# ===================
rebuildUGrp = cmds.group(em=True, n=prefix + "_rebuildU_grp")
cmds.parent(crvU, rebuildUGrp)
cmds.parent(srfU, rebuildUGrp)
rebuildVGrp = cmds.group(em=True, n=prefix + "_rebuildV_grp")
cmds.parent(crvV, rebuildVGrp)
cmds.parent(srfV, rebuildVGrp)
rebuildGrp = cmds.group(em=True, n=prefix + "_lockLength_grp")
cmds.parent(rebuildUGrp, rebuildGrp)
cmds.parent(rebuildVGrp, rebuildGrp)
# =================
# - Return Result -
# =================
return rebuildGrp
def build(attachments=4, sections=9, sectionsSpans=8, minRadius=0.0, maxRadius=1.0, startPt=[0.0, 0.0, 6.0],
endPt=[0.0, 0.0, -6.0], prefix='muscle'):
"""
Build muscle primitive based on the input argument values between the start and end points
@param attachments: Number of attachments points
@type attachments: int
@param sections: Number of profile curves
@type sections: int
@param sectionSpans: Number of spans for profile curves
@type sectionSpans: int
@param minRadius: Minimum radius for muscle profile curves
@type minRadius: float
@param maxRadius: Maximum radius for muscle profile curves
@type maxRadius: float
@param startPt: Start point of the muscle
@type startPt: list
@param endPt: End point of the muscle
@type endPt: list
@param prefix: Name prefix for muscle primitive
@type prefix: str
@return: Muscle mesh
@returnType: str
"""
# Checks
# Get start, end and distance values
startPoint = glTools.utils.base.getMPoint(startPt)
endPoint = glTools.utils.base.getMPoint(endPt)
startEndOffset = endPoint - startPoint
startEndDist = startEndOffset.length()
startEndInc = startEndDist / (attachments - 1)
# Calculate attachment point positions
attachPoints = []
for i in range(attachments):
attachPoints.append(startPoint + (startEndOffset.normal() * startEndInc * i))
# Start Tangent
if not i:
attachPoints.append(startPoint + (startEndOffset.normal() * startEndInc * 0.5))
# End Tangent
if i == (attachments - 2):
attachPoints.append(startPoint + (startEndOffset.normal() * startEndInc * (i + 0.5)))
attachPts = [[pt.x, pt.y, pt.z] for pt in attachPoints]
# Resize attachments value to accomodate for tangent points
attachments = len(attachPts)
# ------------------------
# - Build base hierarchy -
# ------------------------
# Create groups
muscleGrp = cmds.createNode('transform', n=prefix + '_group')
muscleAttachGrp = cmds.createNode('transform', n=prefix + '_attachment_group')
muscleProfileGrp = cmds.createNode('transform', n=prefix + '_profile_group')
# Build hierarchy
cmds.parent(muscleAttachGrp, muscleGrp)
cmds.parent(muscleProfileGrp, muscleGrp)
# ----------------------
# - Build Muscle Curve -
# ----------------------
# Build muscle base curve
muscleCurve = cmds.rename(cmds.curve(d=1, p=attachPts, k=range(len(attachPts))), prefix + '_curve')
cmds.rebuildCurve(muscleCurve, ch=0, rpo=1, rt=0, end=1, kr=0, kcp=1, kep=1, kt=1, s=0, d=1)
muscleCurveShape = cmds.listRelatives(muscleCurve, s=True)[0]
cmds.parent(muscleCurve, muscleAttachGrp)
# Add muscle attributes
cmds.addAttr(muscleCurve, ln='muscle', at='message')
cmds.addAttr(muscleCurve, ln='muscleObjectType', dt='string')
cmds.setAttr(muscleCurve + '.muscleObjectType', 'spline', type='string', l=True)
# Connect curve to attachment locators
attachLocators = glTools.utils.curve.locatorCurve(muscleCurve, locatorScale=0.1, freeze=False, prefix=prefix)
# Rename attachment locators and add muscle attibutes
for i in range(len(attachLocators)):
# Add muscle attibutes
cmds.addAttr(attachLocators[i], ln='muscle', at='message')
cmds.addAttr(attachLocators[i], ln='muscleObjectType', dt='string')
cmds.setAttr(attachLocators[i] + '.muscleObjectType', 'attachment', type='string', l=True)
# Rename attachment locators
if not i:
attachLocators[i] = cmds.rename(attachLocators[i], prefix + '_attachStart_locator')
elif i == 1:
attachLocators[i] = cmds.rename(attachLocators[i], prefix + '_attachStartTangent_locator')
cmds.setAttr(attachLocators[i] + '.muscleObjectType', l=False)
cmds.setAttr(attachLocators[i] + '.muscleObjectType', 'attachmentTangent', type='string', l=True)
elif i == (attachments - 2):
attachLocators[i] = cmds.rename(attachLocators[i], prefix + '_attachEndTangent_locator')
cmds.setAttr(attachLocators[i] + '.muscleObjectType', l=False)
cmds.setAttr(attachLocators[i] + '.muscleObjectType', 'attachmentTangent', type='string', l=True)
elif i == (attachments - 1):
attachLocators[i] = cmds.rename(attachLocators[i], prefix + '_attachEnd_locator')
else:
attachLocators[i] = cmds.rename(attachLocators[i], prefix + '_attachMid' + str(i - 1) + '_locator')
# Group attachment locators
attachLocGroup = []
[attachLocGroup.append(glTools.utils.base.group(loc)) for loc in attachLocators]
cmds.parent(attachLocGroup, muscleAttachGrp)
# Create spline rebuild curve
splineCurve = cmds.rebuildCurve(muscleCurve, ch=1, rpo=0, rt=0, end=1, kr=0, kcp=0, kep=1, kt=1, s=5, d=3)
splineRebuild = cmds.rename(splineCurve[1], prefix + '_spline_rebuildCurve')
splineCurveShape = cmds.rename(cmds.listRelatives(splineCurve[0], s=True)[0], prefix + '_spline_curveShape')
cmds.parent(splineCurveShape, muscleCurve, s=True, r=True)
cmds.delete(splineCurve[0])
# Create tangent rebuild curve
tangentCurve = cmds.rebuildCurve(muscleCurve, ch=1, rpo=0, rt=0, end=1, kr=0, kcp=0, kep=1, kt=1, s=2, d=3)
tangentRebuild = cmds.rename(tangentCurve[1], prefix + '_tangent_rebuildCurve')
tangentCurveShape = cmds.rename(cmds.listRelatives(tangentCurve[0], s=True)[0], prefix + '_tangent_curveShape')
cmds.parent(tangentCurveShape, muscleCurve, s=True, r=True)
cmds.delete(tangentCurve[0])
# Create curve visibility attributes
cmds.addAttr(muscleCurve, ln='attachment', at='enum', en='Off:On:')
cmds.setAttr(muscleCurve + '.attachment', k=False, cb=True)
cmds.connectAttr(muscleCurve + '.attachment', muscleCurveShape + '.v')
cmds.addAttr(muscleCurve, ln='spline', at='enum', en='Off:On:')
cmds.setAttr(muscleCurve + '.spline', k=False, cb=True)
cmds.connectAttr(muscleCurve + '.spline', splineCurveShape + '.v')
cmds.addAttr(muscleCurve, ln='tangent', at='enum', en='Off:On:')
cmds.setAttr(muscleCurve + '.tangent', k=False, cb=True)
cmds.connectAttr(muscleCurve + '.tangent', tangentCurveShape + '.v')
cmds.setAttr(muscleCurve + '.attachment', 0)
cmds.setAttr(muscleCurve + '.spline', 1)
cmds.setAttr(muscleCurve + '.tangent', 1)
# Setup start tangent toggle
cmds.addAttr(attachLocators[0], ln='tangentControl', at='enum', en='Off:On:')
cmds.setAttr(attachLocators[0] + '.tangentControl', k=False, cb=True)
cmds.connectAttr(attachLocators[0] + '.tangentControl', attachLocGroup[1] + '.v', f=True)
startTangentBlend = cmds.createNode('blendColors', n=prefix + '_startTangent_blendColors')
cmds.connectAttr(attachLocators[1] + '.worldPosition[0]', startTangentBlend + '.color1', f=True)
cmds.connectAttr(attachLocators[2] + '.worldPosition[0]', startTangentBlend + '.color2', f=True)
cmds.connectAttr(attachLocators[0] + '.tangentControl', startTangentBlend + '.blender', f=True)
cmds.connectAttr(startTangentBlend + '.output', muscleCurve + '.controlPoints[1]', f=True)
# Setup end tangent toggle
cmds.addAttr(attachLocators[-1], ln='tangentControl', at='enum', en='Off:On:')
cmds.setAttr(attachLocators[-1] + '.tangentControl', k=False, cb=True)
cmds.connectAttr(attachLocators[-1] + '.tangentControl', attachLocGroup[-2] + '.v', f=True)
endTangentBlend = cmds.createNode('blendColors', n=prefix + '_endTangent_blendColors')
cmds.connectAttr(attachLocators[-2] + '.worldPosition[0]', endTangentBlend + '.color1', f=True)
cmds.connectAttr(attachLocators[-3] + '.worldPosition[0]', endTangentBlend + '.color2', f=True)
cmds.connectAttr(attachLocators[-1] + '.tangentControl', endTangentBlend + '.blender', f=True)
cmds.connectAttr(endTangentBlend + '.output', muscleCurve + '.controlPoints[' + str(attachments - 2) + ']', f=True)
# -------------------------------
# - Build Muscle Profile Curves -
# -------------------------------
# Initialize profile list
profileList = []
profileGrpList = []
profileFollowList = []
# Iterate through profiles
profileInc = 1.0 / (sections - 1)
for i in range(sections):
# Create profile curve
profile = cmds.circle(ch=0, c=(0, 0, 0), nr=(0, 0, 1), sw=360, r=1, d=3, ut=0, tol=0.01, s=sectionsSpans,
n=prefix + '_profile' + str(i + 1) + '_curve')[0]
profileList.append(profile)
# Add muscle profile attribute
cmds.addAttr(profile, ln='muscle', at='message')
cmds.addAttr(profile, ln='muscleObjectType', dt='string')
cmds.setAttr(profile + '.muscleObjectType', 'profile', type='string', l=True)
# Group profile curve
profileGrp = glTools.utils.base.group(profile)
profileGrpList.append(profileGrp)
# Skip start/end profiles
if (not i) or (i == (sections - 1)): continue
# Add curve parameter attribute
cmds.addAttr(profile, ln='uValue', min=0.0, max=1.0, dv=profileInc * i)
cmds.setAttr(profile + '.uValue', k=False, cb=True)
# Create profile pointOnCurveInfo node
profileCurveInfo = cmds.createNode('pointOnCurveInfo', n=prefix + '_profile' + str(i + 1) + '_pointOnCurveInfo')
# Attach profile group to point on muscle spline curve
cmds.connectAttr(splineCurveShape + '.worldSpace[0]', profileCurveInfo + '.inputCurve', f=True)
cmds.connectAttr(profile + '.uValue', profileCurveInfo + '.parameter', f=True)
cmds.connectAttr(profileCurveInfo + '.position', profileGrp + '.translate', f=True)
# Create profile follow group
profileFollowGrp = cmds.createNode('transform', n=prefix + '_profileFollow' + str(i + 1) + '_group')
profileFollowList.append(profileFollowGrp)
cmds.connectAttr(profileCurveInfo + '.position', profileFollowGrp + '.translate', f=True)
cmds.parent(profileGrpList, muscleProfileGrp)
cmds.parent(profileFollowList, muscleProfileGrp)
# ------------------------------------
# - Create profile orientation setup -
# ------------------------------------
oddProfile = sections % 2
intProfile = int(sections * 0.5)
midProfile = intProfile + oddProfile
intIncrement = 1.0 / intProfile
# Create mid profile orientConstraint
if oddProfile:
midPointObject = profileFollowList[midProfile - 2]
else:
midPointObject = cmds.createNode('transform', n=prefix + '_midPointFollow_group')
cmds.parent(midPointObject, muscleProfileGrp)
midOrientCon = cmds.orientConstraint([attachLocators[0], attachLocators[-1]], midPointObject,
n=prefix + '_midPoint_orientConstraint')
# Create intermediate profile orientConstraints
for i in range(intProfile):
# Skip start/end profiles
if not i: continue
# Create orientConstraints
startMidOriCon = cmds.orientConstraint([attachLocators[0], midPointObject], profileFollowList[i - 1])[0]
endMidOriCon = cmds.orientConstraint([attachLocators[-1], midPointObject], profileFollowList[-(i)])[0]
startMidOriWt = cmds.orientConstraint(startMidOriCon, q=True, weightAliasList=True)
endMidOriWt = cmds.orientConstraint(endMidOriCon, q=True, weightAliasList=True)
# Set constraint weights
cmds.setAttr(startMidOriCon + '.' + startMidOriWt[0], 1.0 - (intIncrement * i))
cmds.setAttr(startMidOriCon + '.' + startMidOriWt[1], (intIncrement * i))
cmds.setAttr(endMidOriCon + '.' + endMidOriWt[0], 1.0 - (intIncrement * i))
cmds.setAttr(endMidOriCon + '.' + endMidOriWt[1], (intIncrement * i))
# Add constraint weight attribute to profile
cmds.addAttr(profileList[i], ln='twist', min=0, max=1, dv=1.0 - (intIncrement * i), k=True)
cmds.addAttr(profileList[-(i + 1)], ln='twist', min=0, max=1, dv=1.0 - (intIncrement * i), k=True)
# Connect twist attribite to constraint weights
startMidOriRev = cmds.createNode('reverse', n=profileList[i].replace('_curve', '_reverse'))
endMidOriRev = cmds.createNode('reverse', n=profileList[-(i + 1)].replace('_curve', '_reverse'))
cmds.connectAttr(profileList[i] + '.twist', startMidOriRev + '.inputX', f=True)
cmds.connectAttr(profileList[i] + '.twist', startMidOriCon + '.' + startMidOriWt[0], f=True)
cmds.connectAttr(startMidOriRev + '.outputX', startMidOriCon + '.' + startMidOriWt[1], f=True)
cmds.connectAttr(profileList[-(i + 1)] + '.twist', endMidOriRev + '.inputX', f=True)
cmds.connectAttr(profileList[-(i + 1)] + '.twist', endMidOriCon + '.' + endMidOriWt[0], f=True)
cmds.connectAttr(endMidOriRev + '.outputX', endMidOriCon + '.' + endMidOriWt[1], f=True)
# Create Profile tangent constraints
tangentConList = []
for i in range(len(profileGrpList)):
# Determine world up object
if not i:
# start profile
worldUpObject = attachLocators[0]
elif i == (len(profileGrpList) - 1):
# end profile
worldUpObject = attachLocators[-1]
else:
worldUpObject = profileFollowList[i - 1]
# Create constraint
tangentCon = cmds.tangentConstraint(tangentCurveShape, profileGrpList[i], aim=[0, 0, -1], u=[0, 1, 0],
wu=[0, 1, 0], wut='objectrotation', wuo=worldUpObject)
tangentConList.append(tangentCon)
# -----------------------------
# - Set profile radius values -
# -----------------------------
# Set default profile radius values
radiusList = glTools.utils.mathUtils.distributeValue(midProfile, rangeStart=minRadius, rangeEnd=maxRadius)
radiusList = [glTools.utils.mathUtils.smoothStep(i, minRadius, maxRadius, 0.5) for i in radiusList]
for i in range(midProfile):
cmds.setAttr(profileList[i] + '.scale', radiusList[i], radiusList[i], radiusList[i])
cmds.setAttr(profileList[-(i + 1)] + '.scale', radiusList[i], radiusList[i], radiusList[i])
# ----------------------------
# - Generate Muscle Geometry -
# ----------------------------
# Loft mesh between profile curves
loft = cmds.loft(profileList, u=0, c=0, d=3, ch=1, po=1)
muscleMesh = cmds.rename(loft[0], prefix)
muscleLoft = cmds.rename(loft[1], prefix + '_loft')
muscleTess = cmds.listConnections(muscleLoft + '.outputSurface', s=False, d=True, type='nurbsTessellate')[0]
muscleTess = cmds.rename(muscleTess, prefix + '_nurbsTessellate')
cmds.parent(muscleMesh, muscleGrp)
# Set nurbsTessellate settings
cmds.setAttr(muscleTess + '.format', 2)
cmds.setAttr(muscleTess + '.polygonType', 1)
cmds.setAttr(muscleTess + '.uType', 1)
cmds.setAttr(muscleTess + '.vType', 1)
cmds.setAttr(muscleTess + '.uNumber', 20)
cmds.setAttr(muscleTess + '.vNumber', 10)
# Add muscle mesh attributes
cmds.addAttr(muscleMesh, ln='precision', at='long', min=1, dv=5)
cmds.setAttr(muscleMesh + '.precision', k=False, cb=True)
cmds.addAttr(muscleMesh, ln='tangentPrecision', at='long', min=1, dv=2)
cmds.setAttr(muscleMesh + '.tangentPrecision', k=False, cb=True)
cmds.addAttr(muscleMesh, ln='uDivisions', at='long', min=4, dv=20)
cmds.setAttr(muscleMesh + '.uDivisions', k=False, cb=True)
cmds.addAttr(muscleMesh, ln='vDivisions', at='long', min=3, dv=10)
cmds.setAttr(muscleMesh + '.vDivisions', k=False, cb=True)
cmds.addAttr(muscleMesh, ln='restLength', at='float', min=0, dv=startEndDist)
cmds.setAttr(muscleMesh + '.restLength', k=False, cb=True)
cmds.addAttr(muscleMesh, ln='currentLength', at='float', min=0, dv=startEndDist)
cmds.setAttr(muscleMesh + '.currentLength', k=True)
cmds.addAttr(muscleMesh, ln='lengthScale', at='float', min=0, dv=1)
cmds.setAttr(muscleMesh + '.lengthScale', k=True)
cmds.addAttr(muscleMesh, ln='muscleMessage', at='message')
cmds.addAttr(muscleMesh, ln='muscleSpline', at='message')
cmds.addAttr(muscleMesh, ln='attachment', at='message', m=True)
cmds.addAttr(muscleMesh, ln='profile', at='message', m=True)
cmds.addAttr(muscleMesh, ln='muscleObjectType', dt='string')
cmds.setAttr(muscleMesh + '.muscleObjectType', 'geo', type='string', l=True)
# Connect muscle mesh attributes
cmds.connectAttr(muscleCurve + '.message', muscleMesh + '.muscleSpline', f=True)
for i in range(len(attachLocators)):
cmds.connectAttr(attachLocators[i] + '.message', muscleMesh + '.attachment[' + str(i) + ']', f=True)
cmds.connectAttr(muscleMesh + '.message', attachLocators[i] + '.muscle', f=True)
for i in range(len(profileList)):
cmds.connectAttr(profileList[i] + '.message', muscleMesh + '.profile[' + str(i) + ']', f=True)
cmds.connectAttr(muscleMesh + '.message', profileList[i] + '.muscle', f=True)
# Connect muscle mesh attributes to curve rebuild settings
cmds.connectAttr(muscleMesh + '.precision', splineRebuild + '.spans', f=True)
musclePreCondition = cmds.createNode('condition', n=prefix + '_precision_condition')
cmds.setAttr(musclePreCondition + '.operation', 4) # Less Than
cmds.connectAttr(muscleMesh + '.precision', musclePreCondition + '.firstTerm', f=True)
cmds.connectAttr(muscleMesh + '.tangentPrecision', musclePreCondition + '.secondTerm', f=True)
cmds.connectAttr(muscleMesh + '.precision', musclePreCondition + '.colorIfTrueR', f=True)
cmds.connectAttr(muscleMesh + '.tangentPrecision', musclePreCondition + '.colorIfFalseR', f=True)
cmds.connectAttr(musclePreCondition + '.outColorR', tangentRebuild + '.spans', f=True)
# Connect musle mesh attributes to nurbsTessellate settings
cmds.connectAttr(muscleMesh + '.uDivisions', muscleTess + '.uNumber', f=True)
cmds.connectAttr(muscleMesh + '.vDivisions', muscleTess + '.vNumber', f=True)
# Setup length calculation
muscleLenCurveInfo = cmds.createNode('curveInfo', n=prefix + '_length_curveInfo')
cmds.connectAttr(splineCurveShape + '.worldSpace[0]', muscleLenCurveInfo + '.inputCurve', f=True)
cmds.connectAttr(muscleLenCurveInfo + '.arcLength', muscleMesh + '.currentLength', f=True)
muscleLenDiv = cmds.createNode('multiplyDivide', n=prefix + '_length_multiplyDivide')
cmds.setAttr(muscleLenDiv + '.operation', 2) # Divide
cmds.setAttr(muscleLenDiv + '.input1', 1, 1, 1)
cmds.setAttr(muscleLenDiv + '.input2', 1, 1, 1)
cmds.connectAttr(muscleLenCurveInfo + '.arcLength', muscleLenDiv + '.input1X', f=True)
cmds.connectAttr(muscleMesh + '.restLength', muscleLenDiv + '.input2X', f=True)
cmds.connectAttr(muscleLenDiv + '.outputX', muscleMesh + '.lengthScale', f=True)
# -----------
# - Cleanup -
# -----------
# Parent start/end tangent locators
cmds.parent(attachLocGroup[1], attachLocators[0])
cmds.parent(attachLocGroup[-2], attachLocators[-1])
# Parent start/end profiles
cmds.parent(profileGrpList[0], attachLocators[0])
cmds.setAttr(profileGrpList[0] + '.t', 0.0, 0.0, 0.0)
cmds.setAttr(profileGrpList[0] + '.r', 0.0, 0.0, 0.0)
cmds.setAttr(profileGrpList[0] + '.s', 1.0, 1.0, 1.0)
cmds.parent(profileGrpList[-1], attachLocators[-1])
cmds.setAttr(profileGrpList[-1] + '.t', 0.0, 0.0, 0.0)
cmds.setAttr(profileGrpList[-1] + '.r', 0.0, 0.0, 0.0)
cmds.setAttr(profileGrpList[-1] + '.s', 1.0, 1.0, 1.0)
# Setup start/end profile scale compensation
attachStartScaleCompNode = cmds.createNode('multiplyDivide', n=prefix + '_attachStart_multiplyDivide')
cmds.setAttr(attachStartScaleCompNode + '.input1', 1, 1, 1)
cmds.setAttr(attachStartScaleCompNode + '.operation', 2)
cmds.connectAttr(attachLocators[0] + '.scale', attachStartScaleCompNode + '.input2', f=True)
cmds.connectAttr(attachStartScaleCompNode + '.output', profileGrpList[0] + '.scale', f=True)
attachEndScaleCompNode = cmds.createNode('multiplyDivide', n=prefix + '_attachEnd_multiplyDivide')
cmds.setAttr(attachEndScaleCompNode + '.input1', 1, 1, 1)
cmds.setAttr(attachEndScaleCompNode + '.operation', 2)
cmds.connectAttr(attachLocators[-1] + '.scale', attachEndScaleCompNode + '.input2', f=True)
cmds.connectAttr(attachEndScaleCompNode + '.output', profileGrpList[-1] + '.scale', f=True)
# Lock transforms
cmds.setAttr(muscleGrp + '.inheritsTransform', 0)
cmds.setAttr(muscleGrp + '.t', l=True, cb=True)
cmds.setAttr(muscleGrp + '.r', l=True, cb=True)
cmds.setAttr(muscleGrp + '.s', l=True, cb=True)
# Return result
return muscleMesh
